Hi,
I moved into a new house yesterday and when un packing I found an Amazon Kindle Fire HD that was basically left behind I went to plug it in to my phone charger Micro USB and it began too boot up but then stopped at the Fastboot logo with Kindle Fire under it. Ive never had a Kindle Fire before so not really sure what to do tried connecting it to my Laptop but nothing shows up i.e installs etc. I don't know if it would be bricked or a software fault and tried Power and Volume Up and Down to see if there is a recovery system but they isn't.
I hope one of you guys can help
Thanks
It doesn't show up at all on the device manager with a triangle next to it listed as Tate,jem, otter,or otter 2 does it?
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
when i plug my kindle in the pc it does show tate-pvt-08 in device manager and the kindle is stuck in fastboot mode.. any advice?
Right click the device, hit update drivers, download the drivers in my signature, and extract them, point the update device window to where you extracted my drivers and let it install them, if you are on windows 8 you will have to disable driver signature enforcement first. Once the drivers are installed I would suggest trying a simple
Code:
fastboot -i 0x1949 reboot
that might kick it out of fastboot. Tell me how it goes.
Sent from my Amazon Kindle Fire HD using xda app-developers app
stunts513 said:
Right click the device, hit update drivers, download the drivers in my signature, and extract them, point the update device window to where you extracted my drivers and let it install them, if you are on windows 8 you will have to disable driver signature enforcement first. Once the drivers are installed I would suggest trying a simple
Code:
fastboot -i 0x1949 reboot
that might kick it out of fastboot. Tell me how it goes.
Sent from my Amazon Kindle Fire HD using xda app-developers app
Click to expand...
Click to collapse
tried the driver but now in device manager the kindle has that yellow triangle and fastboot is stuck on waiting for device
Yellow triangle probably means the driver is still not installed...
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Stuck at Fastboot Mode
stunts513 said:
Right click the device, hit update drivers, download the drivers in my signature, and extract them, point the update device window to where you extracted my drivers and let it install them, if you are on windows 8 you will have to disable driver signature enforcement first. Once the drivers are installed I would suggest trying a simple
Code:
fastboot -i 0x1949 reboot
that might kick it out of fastboot. Tell me how it goes.
Sent from my Amazon Kindle Fire HD using xda app-developers app
Click to expand...
Click to collapse
Hello! First of all, i'm kind of a noob as far as kindle development issues concern, but i managed to install custom roms before (in fact, my brick problema began when i tried to upgrade to CM11 from goo.im). I am really desperate right now because i followed all the instructions in several threads but nothing helped me so far.
Here is my situation:
My kindle fire hd 7" is stuck at Fastboot mode after my failed attempt to upgrade from CM10.1 to CM11. My computer recognizes it as Tate-PVT-08 but it's not accepting any fastboot commands, except for "fastboot -i 0x1949 reboot". When i run this command, my kindle actually "reboots" but goes into fatboot mode again and again. When in "cmd", it doesn't recognize the devices either, but when run command "getvar" shows Tate-PVT-08. In conclusión, i want to know if there is a problema with the instalation of cmd in my PC, or if you can recommend any tool to restore my Tablet, even if it means going back to stock OS.
Any help would be very appreciated. Thank you very much in advance.
guillemedina11 said:
Hello! First of all, i'm kind of a noob as far as kindle development issues concern, but i managed to install custom roms before (in fact, my brick problema began when i tried to upgrade to CM11 from goo.im). I am really desperate right now because i followed all the instructions in several threads but nothing helped me so far.
Here is my situation:
My kindle fire hd 7" is stuck at Fastboot mode after my failed attempt to upgrade from CM10.1 to CM11. My computer recognizes it as Tate-PVT-08 but it's not accepting any fastboot commands, except for "fastboot -i 0x1949 reboot". When i run this command, my kindle actually "reboots" but goes into fatboot mode again and again. When in "cmd", it doesn't recognize the devices either, but when run command "getvar" shows Tate-PVT-08. In conclusión, i want to know if there is a problema with the instalation of cmd in my PC, or if you can recommend any tool to restore my Tablet, even if it means going back to stock OS.
Any help would be very appreciated. Thank you very much in advance.
Click to expand...
Click to collapse
Are you using a fastboot cord? If so that's why. Use that command and then pull the cord from the computer as soon as it restarts.
Sent from my Nexus 7 Flo running CM 11 4.4.2 with ElementalX Kernel using XDA Premium 4 mobile app
LinearEquation said:
Are you using a fastboot cord? If so that's why. Use that command and then pull the cord from the computer as soon as it restarts.
Click to expand...
Click to collapse
Thank you for taking your time to help me out, appreciate it.
I changed the cord because i realized that i'm already in fastboot mode, so don't need fastboot cable. When i run the command, the Kindle boot logo lasts for few more senconds than with fastboot cable, but still goes into fastboot mode again. Also tried pushing all posible buttons (At blue kindle ffire logo) to reach recovery mode but failed. I'm using Kindle Fire First Aide but doesn't seems to work either.
Any toughts? Thank you.
guillemedina11 said:
Thank you for taking your time to help me out, appreciate it.
Click to expand...
Click to collapse
You're welcome
I changed the cord because i realized that i'm already in fastboot mode, so don't need fastboot cable. When i run the command, the Kindle boot logo lasts for few more senconds than with fastboot cable, but still goes into fastboot mode again.
Click to expand...
Click to collapse
do you see the yellow Kindle Fire boot animation at all?
Also tried pushing all posible buttons (At blue kindle ffire logo) to reach recovery mode but failed.
Click to expand...
Click to collapse
If you see the blue TWRP there may be hope without a doing a factory reset. Press the power button for 30 seconds and power down the KFHD7. Now hit power to turn the Kindle on and as soon as you see the yellow Kindle boot animation hold the volume rocker up and continue to hold it there until until you see the blue TWRP boot animation and continue pressing for three seconds, then release. Do you boot into TWRP? If you see the blue TWRP boot animation you should have it.
I'm using Kindle Fire First Aide but doesn't seems to work either.
Click to expand...
Click to collapse
If you can get into TWRP that might be to your advantage because you can adb.sideload a ROM onto TWRP flash it and go on with it from there. KFFA has been down off and on. It was once a great tool but it needs updated and the Drop Box account associated with it is down at the momnent.
Click to expand...
Click to collapse
LinearEquation said:
guillemedina11 said:
You're welcome
do you see the yellow Kindle Fire boot animation at all?
If you see the blue TWRP there may be hope without a doing a factory reset. Press the power button for 30 seconds and power down the KFHD7. Now hit power to turn the Kindle on and as soon as you see the yellow Kindle boot animation hold the volume rocker up and continue to hold it there until until you see the blue TWRP boot animation and continue pressing for three seconds, then release. Do you boot into TWRP? If you see the blue TWRP boot animation you should have it.
If you can get into TWRP that might be to your advantage because you can adb.sideload a ROM onto TWRP flash it and go on with it from there. KFFA has been down off and on. It was once a great tool but it needs updated and the Drop Box account associated with it is down at the momnent.
Click to expand...
Click to collapse
Mr LinearEquation, thank you so much for your advice.
Following a different thread i managed to boot into TWRP by flashing images of "Freedom Boot" and TWRP itself via fastboot commands. Now in theory i can flash a .zip of any ROM but the thing is that i cannot load zips to the Tablet. even though it's recognized now as KINDLE instead of Tate-PVT-08 in the Device Manager, i'm not able to see the kindle as a Pop-up window where you can drag-and-drop files to the Tablet.
The question is: How do i push a ROM via adb as you mentioned in your previous message? Do you know which file do i need and the proper command to push it?
Kindly Regards.
Click to expand...
Click to collapse
LinearEquation said:
Are you using a fastboot cord? If so that's why. Use that command and then pull the cord from the computer as soon as it restarts.
Sent from my Nexus 7 Flo running CM 11 4.4.2 with ElementalX Kernel using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Help! Mine was stuck in fastboot. When I hit the power button it boots up automatically in fastboot with any device attached to it. Then after a few sec it goes off.
Underurbed said:
Help! Mine was stuck in fastboot. When I hit the power button it boots up automatically in fastboot with any device attached to it. Then after a few sec it goes off.
Click to expand...
Click to collapse
Have you looked at this page? http://forum.xda-developers.com/showthread.php?t=2271909 Maybe the unbricked section (part 6 of first page) can help in particular the SRT tool http://forum.xda-developers.com/showthread.php?t=1951254 . I have also noticed if you scroll down to troubleshooting section on the first page of first link it lists your problem and the steps to resolve it
Sent from my Amazon Tate using Tapatalk
Thank you for the reply. Well, my first problem is the kindle doesn't stay on fastboot. It shuts down after a second.
recovery
Hi I locked mine up also and used a program called
Demo Mode Restore. Basically you shut off your kindle and unplug the charge/data cable run the program and click enter once then says plug you kindle in and when it boots the program catches it before it starts up and all you have to do is follow the directions and when it restarts its like when you first took it out of the box
You`ll have to do a search for Demo Mode Restore
Hope this help. God Bless )
joshuafalls63 said:
I moved into a new house yesterday and when un packing I found an Amazon Kindle Fire HD that was basically left behind I went to plug it in to my phone charger Micro USB and it began too boot up but then stopped at the Fastboot logo with Kindle Fire under it. Ive never had a Kindle Fire before so not really sure what to do tried connecting it to my Laptop but nothing shows up i.e installs etc. I don't know if it would be bricked or a software fault and tried Power and Volume Up and Down to see if there is a recovery system but they isn't.
I hope one of you guys can help
Thanks
Click to expand...
Click to collapse
Related
I made some changes to the build.prop and rebooted, and now it gets stuck at the Kindle Fire boot animation. I can't get it to boot into safe mode either. Is there a way to unbrick or restore it without a factory cable? I can't get it to show up with adb.
If there's no way, I could probably make a factory cable, but it would be nice to fix it without having to do that.
FroyoShark said:
I made some changes to the build.prop and rebooted, and now it gets stuck at the Kindle Fire boot animation. I can't get it to boot into safe mode either. Is there a way to unbrick or restore it without a factory cable? I can't get it to show up with adb.
If there's no way, I could probably make a factory cable, but it would be nice to fix it without having to do that.
Click to expand...
Click to collapse
Yes there is a way to get the 8.9 into fastboot so you can restore it without a factory cable, as a factory cable does not work on this device.
Power down the device and unplug
Open a cmd prompt where you have access to the fastboot script from SDK
Enter this command (or any fastboot cmd as long as you include [-i 0x1949]:
Code:
fastboot -i 0x1949 getvar product
It will say "waiting for device"
Plug in the device and it will automatically boot into fastboot.
I have confirmed this works works when the device is in a loop and adb is not recognized. This does not work on the other models, a factory cable is required. Once in fastboot you can flash a backup image. I will be posting an update to the KFHD SRTool in the development section this morning to include 8.9" version
onemeila said:
Yes there is a way to get the 8.9 into fastboot so it can you can restore it without a factory cable.
Power down the device and unplug the device.
Open a cmd prompt where you have access to the fastboot script from SDK
Enter this command:
Code:
fastboot -i 0x1949 getvar product
Actually any fastboot command works
It will say "waiting for device"
Plug in the device and it will automatically boot into fastboot.
I have confirmed this works works when the device is in a loop and adb is not recognized. This does not work on the other models, a factory cable is required. Once in fastboot you can flash a backup image. I will be posting an update to the KFHD SRTool in the development section this morning to include 8.9" version
Click to expand...
Click to collapse
Tried that... The command you said just shows the help list, if I do a different fastboot command it says waiting for device and then the Kindle boots normally and gets stuck at boot animation like usual.
FroyoShark said:
Tried that... The command you said just shows the help list, if I do a different fastboot command it says waiting for device and then the Kindle boots normally and gets stuck at boot animation like usual.
Click to expand...
Click to collapse
Are you sure you typed that command correctly because the help menu comes up if a command is entered wrong, I just did it and it worked fine. When you enter a fastboot command for this device it has to have the- [-i 0x1949] after fastboot, that is a zero not an O. If that is not done it will boot normally
ie:
fastboot -i 0x1949 [command]
I've posted the update for the 8.9 restore tool in development section
It could be because I have an older version of fastboot. Any chance you could upload the newest version for me?
FroyoShark said:
It could be because I have an older version of fastboot. Any chance you could upload the newest version for me?
Click to expand...
Click to collapse
Here you go:
https://docs.google.com/folder/d/0B4lZEJI5lYeMdzJobG5jSk9QSEk/edit
If you need to restore the system image though, you should just download the KFHD_SRTool from development section for 8.9 and follow the instructions. It has fastboot included in the tool.
I've done the same thing with my kindle fire hd 7 (7.2.2 rooted, no TWRP), now its just stuck on the boot animation.
adb does not recognize the device. I tried using fastboot, (with the normal usb cable), it gets stuck with the '<waiting for device>' message.
The device manager does show the Kindle, but earlier it used to show 2 devices, a kindle and an adb composite
Were you ultimately able to solve this issue?
rogue07 said:
I've done the same thing with my kindle fire hd 7 (7.2.2 rooted, no TWRP), now its just stuck on the boot animation.
adb does not recognize the device. I tried using fastboot, (with the normal usb cable), it gets stuck with the '<waiting for device>' message.
The device manager does show the Kindle, but earlier it used to show 2 devices, a kindle and an adb composite
Were you ultimately able to solve this issue?
Click to expand...
Click to collapse
Turns out, it was a driver issue. Installed the proper Amazon driver, then it was detected by the adb. From there on, I was able to replace the bad build.prop with my backup
onemeila said:
Yes there is a way to get the 8.9 into fastboot so you can restore it without a factory cable, as a factory cable does not work on this device. <snip>
Click to expand...
Click to collapse
My Kindle Fire 8.9" SW v.8.1.4 is completely dark and unresponsive as the result of an unsuccessful attempt to root using KF utility 0.9.6. I suspect results would have been different if I'd had the sense to locate your tool and use it instead. Having downloaded KFHD for v8.1.4, I have tried to get the tool talking with the brick, and see only < waiting for device > eternally. I have charged overnight, held the power button down for >20 sec. to make sure the device was off, then bumped the power button. This should assure that the device is on, but in Amazon's wisdom there are no LEDs to confirm this. Do you have any suggestions for getting the device in a communicative state? I am perfectly willing to open the case. Please forgive the post if this is not the right thread for it, and point me to the right spot if you can.
Same problem: KF 8.9" completely dead
jimbobboy said:
My Kindle Fire 8.9" SW v.8.1.4 is completely dark and unresponsive as the result of an unsuccessful attempt to root using KF utility 0.9.6. .
Click to expand...
Click to collapse
I have exactly the same problem. This KFU-version seems to be a real KF 8.9"-killer.
My device does not respond to anything, regardless what I tried. Connecting to a PC does not trigger any response. The device is not recognized by the PC in any way. I believe that there is no USB-communication at all. I tried a factory-mode cable and this didn't work, too.
Any help would be appreciated, really!
Thanks and regards
Conny
onemeila said:
Yes there is a way to get the 8.9 into fastboot so you can restore it without a factory cable, as a factory cable does not work on this device.
Power down the device and unplug
Open a cmd prompt where you have access to the fastboot script from SDK
Enter this command (or any fastboot cmd as long as you include [-i 0x1949]:
Code:
fastboot -i 0x1949 getvar product
It will say "waiting for device"
Plug in the device and it will automatically boot into fastboot.
I have confirmed this works works when the device is in a loop and adb is not recognized. This does not work on the other models, a factory cable is required. Once in fastboot you can flash a backup image. I will be posting an update to the KFHD SRTool in the development section this morning to include 8.9" version
Click to expand...
Click to collapse
OMG, man. You just saved my ass. Thank you SO MUCH for that info. I threw a "thanks" your way for that one. If I had some ebay money in my paypal I would've even donated I'm so happy. Thanks again. you made my day!
jimbobboy said:
My Kindle Fire 8.9" SW v.8.1.4 is completely dark and unresponsive as the result of an unsuccessful attempt to root using KF utility 0.9.6. I suspect results would have been different if I'd had the sense to locate your tool and use it instead. Having downloaded KFHD for v8.1.4, I have tried to get the tool talking with the brick, and see only < waiting for device > eternally. I have charged overnight, held the power button down for >20 sec. to make sure the device was off, then bumped the power button. This should assure that the device is on, but in Amazon's wisdom there are no LEDs to confirm this. Do you have any suggestions for getting the device in a communicative state? I am perfectly willing to open the case. Please forgive the post if this is not the right thread for it, and point me to the right spot if you can.
Click to expand...
Click to collapse
Add another brick to the pile. Fire HD 8.9. Already rooted, OTA defeated, and Google App'd, but wanted the security of FFF just in case. Planned to used KFU 0.9.6 to set fastboot and then push FFF 1.4a once in fastboot. Instead, used KFU 0.9.6 to automatically install FFF. It appeared that KFU pushed FFF and then sent a reboot. The machine never came back to life after that shutdown.
Attempting to get into fastboot results in eternally <waiting for device>
I removed the back - there are no obvious 'fastboot' pads on any of the boards as there is for the HD 7".
Does anyone think that a factory cable would get this thing's attention? edit...apparently not. http://forum.xda-developers.com/showpost.php?p=20380015&postcount=9
edit 2...built a factory cable and tried fastboot, KFHD Recovery tool, KFFirstAide, KFU, and Linux Fire Kit. Nothing can see the device on the other end of the USB cable.
Well...there's always a 'motherboard' swap. Sigh.
Another one bites the dust...but hopefully not
Hi guys,
I tried the KFFirstAide tool to root my Fire 8.9, but after it ran, it just wipes red and then goes to the fastboot screen after powering up. I've used the KFHD SRT tool to replaced the system.img file, but still the same thing happens. Is it possibly because I need to restore the boot.img and recovery.img (which KFFirstAide overwrites) as well? And if so, does someone have a clean copy of those that will work with 8.1.4? Thanks!
George
KFHD_SRT
anyone have a working link for KFHD_SRT? i can get into TWRP and into fastboot mode, but simply trying to boot results in a black screen after the blue kindlefire logo
Wait don't do it!
Slimepuppy said:
Add another brick to the pile. Fire HD 8.9. Already rooted, OTA defeated, and Google App'd, but wanted the security of FFF just in case. Planned to used KFU 0.9.6 to set fastboot and then push FFF 1.4a once in fastboot. Instead, used KFU 0.9.6 to automatically install FFF. It appeared that KFU pushed FFF and then sent a reboot. The machine never came back to life after that shutdown.
Attempting to get into fastboot results in eternally <waiting for device>
I removed the back - there are no obvious 'fastboot' pads on any of the boards as there is for the HD 7".
Does anyone think that a factory cable would get this thing's attention? edit...apparently not. http://forum.xda-developers.com/showpost.php?p=20380015&postcount=9
edit 2...built a factory cable and tried fastboot, KFHD Recovery tool, KFFirstAide, KFU, and Linux Fire Kit. Nothing can see the device on the other end of the USB cable.
Well...there's always a 'motherboard' swap. Sigh.
Click to expand...
Click to collapse
I hope you didn't swap motherboards... Like user onemeila stated, you do not need a fastboot cable on the Kindle Fire HD 8.9. Just make sure that before you enter the command "fastboot -i 0x1949 getvar product" that your Kindle is off and plug into the factory cable. Enter the command and wait for the message <wating for device>. Then turn on your kindle and you should boot into fastboot mode. If you see the fastboot screen on your kindle and Jem-PVT-Prod-04 in the command terminal, there is hope. The only problem I encountered is after each command, sometime it won't respond. So you might have to do one command, let it finish it's process. If the next one doesn't work, turn off the kindle enter "fastboot -i 0x1949 getvar product" command. Turn on the kindle and proceed with the next command to restore your kindle.
The way the device is setup, it's very hard to completely ruin the device.
Also read this page for reference by hashcode http://forum.xda-developers.com/showthread.php?t=2128175 and make sure to thank him. He helped me get my device going no problem. The top and bottom of the page should apply to you. If you need additional help let me know.
Slimepuppy said:
Add another brick to the pile. Fire HD 8.9. Already rooted, OTA defeated, and Google App'd, but wanted the security of FFF just in case. Planned to used KFU 0.9.6 to set fastboot and then push FFF 1.4a once in fastboot. Instead, used KFU 0.9.6 to automatically install FFF. It appeared that KFU pushed FFF and then sent a reboot. The machine never came back to life after that shutdown.
Attempting to get into fastboot results in eternally <waiting for device>
I removed the back - there are no obvious 'fastboot' pads on any of the boards as there is for the HD 7".
Does anyone think that a factory cable would get this thing's attention? edit...apparently not. http://forum.xda-developers.com/showpost.php?p=20380015&postcount=9
edit 2...built a factory cable and tried fastboot, KFHD Recovery tool, KFFirstAide, KFU, and Linux Fire Kit. Nothing can see the device on the other end of the USB cable.
Well...there's always a 'motherboard' swap. Sigh.
Click to expand...
Click to collapse
You are pretty much screwed. Sorry to tell you. You've flashed over the bootloader, the problem is with one that doesn't work. So your device won't even boot into fastboot no matter what you do. There was a way to do it on the original KF by removing the back and grounding the usb boot pad, then you could usbboot cmds to install the bootloader. But I'm not sure if it will work or ever been tested on this device. Good Luck, look on the bright side you can turn it into an extremely thin planter box, that still serves no purpose
well
I didnt read everything carefully but succeded in rooting my KHFD 8.9"
then i tried to install FFF using KFU and then it restarted and i couldnt power it on
well i have tried using FireKit .. but it says waiting for OMAP device..
then i wanted to do the shorting trick !!
i have searched for two days and couldnt find any where the how to USB shorting of KHFD 8.9
please help I am getting frustrated..
Sent from my GT-N7100 using xda app-developers app
In total desperation I had opened my KHFD 8.9
But sadly I couldnt do anything to unbrick it
If anybody knows about hardware I can share photos of hardware
And may someone can be able to tell how to unbrick it or do fastboot
Sent from my GT-N7100 using xda app-developers app
onemeila said:
You are pretty much screwed. Sorry to tell you. You've flashed over the bootloader, the problem is with one that doesn't work. So your device won't even boot into fastboot no matter what you do. There was a way to do it on the original KF by removing the back and grounding the usb boot pad, then you could usbboot cmds to install the bootloader. But I'm not sure if it will work or ever been tested on this device. Good Luck, look on the bright side you can turn it into an extremely thin planter box, that still serves no purpose
Click to expand...
Click to collapse
Thanks onemeila - confirmation is good. Unfortunately, this is not a tax deductible education expense... :laugh:
Thanks for your KFHD SRT, by the way - I'm using it nearly weekly.
Andy
Kindle turn of eterny
Slimepuppy said:
Add another brick to the pile. Fire HD 8.9. Already rooted, OTA defeated, and Google App'd, but wanted the security of FFF just in case. Planned to used KFU 0.9.6 to set fastboot and then push FFF 1.4a once in fastboot. Instead, used KFU 0.9.6 to automatically install FFF. It appeared that KFU pushed FFF and then sent a reboot. The machine never came back to life after that shutdown.
Attempting to get into fastboot results in eternally <waiting for device>
I removed the back - there are no obvious 'fastboot' pads on any of the boards as there is for the HD 7".
Does anyone think that a factory cable would get this thing's attention? edit...apparently not. http://forum.xda-developers.com/showpost.php?p=20380015&postcount=9
edit 2...built a factory cable and tried fastboot, KFHD Recovery tool, KFFirstAide, KFU, and Linux Fire Kit. Nothing can see the device on the other end of the USB cable.
Well...there's always a 'motherboard' swap. Sigh.
Click to expand...
Click to collapse
I have the same usse and i don0t know what to do. I made my own factory usb but nothing happens. I don't find the way to fix it... some can help me?
hello everyboddy !
I have a rooted kindle fire HD 7" with the last update and i have attempted to install:
2nd bootloader
Fireflash
TWRP
CM10
But... when i have try to install twrp with Fireflash a red screen is a appeared after the reboot.
I'm a noob and i'm a little panicked !!! Can you help me to unbrick my kindle, i'm ready to make evrything but i have only in my hand my kindle and the original cable.
Please XDA's community !!!
buy a fastboot cable
this helped me with a red screen http://forum.xda-developers.com/showthread.php?t=1951254
The reason this happened was because you was on 7.3x of the AmazonOS, you needed to flash the 7.23 bootloader first before installing the second bootloader. Only a factory cable and the restore tool will save you now.
I did the same thing and the fast boot cable saved me. Good investment.
Sent from my Kindle Fire HD 7 using xda app-developers app
Also I suggest using hashcodes method rather than using fireflash to install TWRP and cm 10.1. It may look complicated but I've used his method on 3 kindles successfully and I'm a bit of a noob Just make sure you open the command window from the folder in which you saved the files - shift +right click mouse >open command window here. Sorry if you already know this. It just took me ages to figure that out lol! The link is here:
http://forum.xda-developers.com/showthread.php?p=40563958
Sent from my CM10.1 Kindle Fire Hd
Glad I'm not the only one. Have the red screen too.. ordered a cable from skorpn.. can't wait to get it and unbrick this thing. Feeling lost without my device.
i have same issue, red screen on boot. I got fastboot cable and installed tool and image. Now after selecting option 1 it just sits on < waiting for device >
if i run as administrator it says 'fastboot' is not recognized
Pls am in d same dilemma
goodknight001 said:
i have same issue, red screen on boot. I got fastboot cable and installed tool and image. Now after selecting option 1 it just sits on < waiting for device >
if i run as administrator it says 'fastboot' is not recognized
Click to expand...
Click to collapse
Am in the same dilemma as well pls kindly post a solution in case u found a way to resolve. I also bought a fastboot/factory cable as well but cant figure out how to make thingz work
bu,p pleas!
davelinc said:
Also I suggest using hashcodes method rather than using fireflash to install TWRP and cm 10.1. It may look complicated but I've used his method on 3 kindles successfully and I'm a bit of a noob Just make sure you open the command window from the folder in which you saved the files - shift +right click mouse >open command window here. Sorry if you already know this. It just took me ages to figure that out lol! The link is here:
http://forum.xda-developers.com/showthread.php?p=40563958
Sent from my CM10.1 Kindle Fire Hd
Click to expand...
Click to collapse
Actually, I've used the FireFlash method twice now on my Kindle Fire HD, and it's worked flawlessly both times, and takes less than five minutes to complete. But hey, whatever works.
i was also stuck in a red screen loop!
you really need a factory cable
what i did was turn off the kindle fire hd then plug in the cable, i turned on the device, and boom just use the toolkit which you can find on the development thread
i hope this helps!!! i was so frustrated as to why it wouldnt work
also you must have the kindle fire adb drivers.
ONLY FOR THOSE WITH A BROKEN POWER BUTTON: and if you dont happen to have a functioning power button like me, wait until the tablet dies, after just plug in the tablet to your pc with the factory cable that way when it finally recharges it boots up in fastboot, otherwise your tablet will be in red screen forever
I screwed up installing CM10.1 forgot to put rom onto device and ended up in boot loop.
I got a fastboot cable but the kindle shows as Tate PVT and the update driver box is greyed out. Cant get fastboot or adb to recognise the device.
Is there anyway to recover from this
Thanks
dean
You have TWRP installed, right? Does your Kindle Fire logo turn blue while booting?
soupmagnet said:
You have TWRP installed, right? Does your Kindle Fire logo turn blue while booting?
Click to expand...
Click to collapse
i might be in the same boat...my kindle fire logo turns blue and gives me a msg at the bottom to press power button for boot menu
when i do i get normal boot,recover,and reset boot mode...when i click on one it just says booting and power button stays organish red for ever
Maybe you don't have your drivers properly installed
sent from my rooted kindle fire hd 7
Baconrind said:
I screwed up installing CM10.1 forgot to put rom onto device and ended up in boot loop.
I got a fastboot cable but the kindle shows as Tate PVT and the update driver box is greyed out. Cant get fastboot or adb to recognise the device.
Is there anyway to recover from this
Thanks
dean
Click to expand...
Click to collapse
If you have twrp installed and the blue kindle boot screen just hit volume down and use the side load feature. But if your fastboot is giving u a problem where u can't hit update driver I would assume it would be because windows is already searching for one still? If so tell windows to skip obtaining from windows update and it finish sooner so u can try to update it manually.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Baconrind said:
I screwed up installing CM10.1 forgot to put rom onto device and ended up in boot loop.
I got a fastboot cable but the kindle shows as Tate PVT and the update driver box is greyed out. Cant get fastboot or adb to recognise the device.
Is there anyway to recover from this
Thanks
dean
Click to expand...
Click to collapse
Hi Baconrind. Screwing one’s device is a good opportunity to learn new things. At least this is what happened to me and I’m glad I did. A couple of months ago I bought a new KFHD7. I spend "wonderful :laugh:" weeks as the happy owner of a KFHD7 until I started to discover the shortcomings of same, so I started reading xda-developers’ stuff to try to customise the device. First I rooted it to be able to install Google Play Store. The idea was to stay as close to stock as possible. Unfortunately I lost root with the first Amazon OTA update, then I decided to install a second bootloader, TWRP, etc. To do that I followed Hashcode’s method Kindle Fire 2nd-bootloader + TWRP for the Kindle Fire HD 7 but at some point I bricked :crying: my device. I was stuck at the Kindle Fire logo. I spent hours browsing through xda-developers and discovered that the first thing to do was to get a fastboot cable. I did not have the patience to wait for it to come from China or wherever they make them, so I found a couple of posts on the xda forum here and here. I made my own even my soldering capabilities are quite limited. I shut down the KFHD7 and plugged the “fastboot” cable to the PC and then to the Kindle, a couple of seconds later I could see the fastboot logo. Once I saw the fastboot logo I unplugged it and used the regular data transfer cable instead. Before I started the unbricking process proper I downloaded and installed this tool: KFHD_SRT_v1.3.5.-7.3. I followed the onscreen indications and could reset my KFHD7 back to its original state. Good luck.
Members,
I need your help for my KINDLE fire 7 " HD stuck at bootlogo. I just came back from work and switched on my KINDLE but it booted and got stuck at 'KINDLE FIRE' boot logo. I tried every possible troubleshooting method, like giving hard reset but nothing works. It switches ON and gets stuck at the LOGO. Going by the forums I know that I need a fastboot cable which I have already ordered and expecting the delivery.
Can you plz guide me how to proceed once I have the cable with me ?
Thanks in advance for your time.
ank707 said:
Members,
I need your help for my KINDLE fire 7 " HD stuck at bootlogo. I just came back from work and switched on my KINDLE but it booted and got stuck at 'KINDLE FIRE' boot logo. I tried every possible troubleshooting method, like giving hard reset but nothing works. It switches ON and gets stuck at the LOGO. Going by the forums I know that I need a fastboot cable which I have already ordered and expecting the delivery.
Can you plz guide me how to proceed once I have the cable with me ?
Thanks in advance for your time.
Click to expand...
Click to collapse
You'll be fine once your fastboot cord arrives. Reference this topic http://forum.xda-developers.com/showthread.php?p=37169349 to return to 7.2.3 stock. And reference this video http://m.youtube.com/watch?v=oaNM-lt_aHw&desktop_uri=/watch?v=oaNM-lt_aHw to get your ADB drivers properly installed.
Sent from my Amazon Kindle Fire HD running CM 10.2 using xda app-developers
LinearEquation said:
You'll be fine once your fastboot cord arrives. Reference this topic http://forum.xda-developers.com/showthread.php?p=37169349 to return to 7.2.3 stock. And reference this video http://m.youtube.com/watch?v=oaNM-lt_aHw&desktop_uri=/watch?v=oaNM-lt_aHw to get your ADB drivers properly installed.
Sent from my Amazon Kindle Fire HD running CM 10.2 using xda app-developers
Click to expand...
Click to collapse
Thanks bro....as soon as I will give it a try I will let you know. Thanks again
LinearEquation said:
You'll be fine once your fastboot cord arrives. Reference this topic http://forum.xda-developers.com/showthread.php?p=37169349 to return to 7.2.3 stock. And reference this video http://m.youtube.com/watch?v=oaNM-lt_aHw&desktop_uri=/watch?v=oaNM-lt_aHw to get your ADB drivers properly installed.
Sent from my Amazon Kindle Fire HD running CM 10.2 using xda app-developers
Click to expand...
Click to collapse
Hey brother....help me please. I now have the factory cable and I have gone through the page that u suggested. But there seems to be instructions without factory cable and I am getting a lot confused. Can you please suggest me how to proceed on this ?
ank707 said:
Hey brother....help me please. I now have the factory cable and I have gone through the page that u suggested. But there seems to be instructions without factory cable and I am getting a lot confused. Can you please suggest me how to proceed on this ?
Click to expand...
Click to collapse
Fastboot cord uses fastboot commands while in fastboot. This is the link to Kindle Fire FirstAid http://forum.xda-developers.com/showthread.php?t=2096888 Once you follow the steps for setup and run it, you will choose number 3 to go back to 7.2.3 When asked if you want to reboot into fastboot, choose no because you are in fastboot.
You can use the regular USB to get into fastboot mode but not now that you are in a bootloop. After running KFFA to restore to 7.2.3 you will also use it to root and remove OTA updates then install gapps or if you are going to go custom romm with 2nd bootloader and TWRP recovery, skip gapps and move on to the latter. Do NOT use KFFA to install TWRP/2nd bootloader or any ROM. Use FireFlash.
Sent from my Amazon Kindle Fire HD running CM 10.2 using xda app-developers
---------- Post added at 02:15 AM ---------- Previous post was at 01:58 AM ----------
I'm heading to bed in an hour. Be 12 hours and I will be back on again. If you have questions or get confused, ask away so we can get you squared away.
Sent from my Amazon Kindle Fire HD running CM 10.2 using xda app-developers
LinearEquation said:
Fastboot cord uses fastboot commands while in fastboot. This is the link to Kindle Fire FirstAid http://forum.xda-developers.com/showthread.php?t=2096888 Once you follow the steps for setup and run it, you will choose number 3 to go back to 7.2.3 When asked if you want to reboot into fastboot, choose no because you are in fastboot.
You can use the regular USB to get into fastboot mode but not now that you are in a bootloop. After running KFFA to restore to 7.2.3 you will also use it to root and remove OTA updates then install gapps or if you are going to go custom romm with 2nd bootloader and TWRP recovery, skip gapps and move on to the latter. Do NOT use KFFA to install TWRP/2nd bootloader or any ROM. Use FireFlash.
Sent from my Amazon Kindle Fire HD running CM 10.2 using xda app-developers
---------- Post added at 02:15 AM ---------- Previous post was at 01:58 AM ----------
I'm heading to bed in an hour. Be 12 hours and I will be back on again. If you have questions or get confused, ask away so we can get you squared away.
Sent from my Amazon Kindle Fire HD running CM 10.2 using xda app-developers
Click to expand...
Click to collapse
Yes, I did that and then reboot my Kindle. But it's same and still stuck at boot logo.
Edit: Now it doesn't even turn ON, seems like the battery has drained. Tried wall charger for all night but still dont boots up. Plugged in the fastboot cable but nothing is happening. Please help :crying::crying:
ank707 said:
Yes, I did that and then reboot my Kindle. But it's same and still stuck at boot logo.
Edit: Now it doesn't even turn ON, seems like the battery has drained. Tried wall charger for all night but still dont boots up. Plugged in the fastboot cable but nothing is happening. Please help :crying::crying:
Click to expand...
Click to collapse
So you're saying that you had a bootloop and you ran Kindle Fire FirstAide. Which numbers/options did you press? Plugging that fastboot cord in will power your Kindle Fire HD and send it into fastboot no matter the battery charge. Where did you get the fastboot cord from? A reliable source? I'm only asking because if the battery were low and the wire that connects pins 1 to 4 (think) that energize the Kindle into fastboot mode are somehow faulty, then this would stop the kindle from going into fastboot. However, if the fastboot cord is working, it would seem you have a hard brick. I will look around to see if there is a solution for this.
LinearEquation said:
So you're saying that you had a bootloop and you ran Kindle Fire FirstAide. Which numbers/options did you press? Plugging that fastboot cord in will power your Kindle Fire HD and send it into fastboot no matter the battery charge. Where did you get the fastboot cord from? A reliable source? I'm only asking because if the battery were low and the wire that connects pins 1 to 4 (think) that energize the Kindle into fastboot mode are somehow faulty, then this would stop the kindle from going into fastboot. However, if the fastboot cord is working, it would seem you have a hard brick. I will look around to see if there is a solution for this.
Click to expand...
Click to collapse
Thanks for help mate. I bought it from amazon and it seemed to be the most reliable source http://www.amazon.com/EarlyBirdSavi...ywords=kindle+factory+cable&tag=s601000020-20
I firstly reboot the bootloader couple of times like people suggested me. When that didn't help I restored it and like i gave a detail in other post that it took fair amount of time like 45 mins of reading and writing the .img files. Even the message was prompted that 'Your kindle has been restored to 7.2.3, the only thing is that all this while the display of my Kindle didn't changed and was fixed on 'Fastboot Kindle fire' logo. I was disappointed with this device from start due to that crappy kindle OS which made it way too slow and things kept freezing and crashing all the time. Since I am in colombia and used a freight service for this cable to be delivered, i ended up paying 30 USD for the cable. I don't think I will be sending it for repair , it just don't worth it the expenses for the repair and the shipping cost from Colombia and vice versa. May be will keep experimenting and looking on XDA if at some point of time hard brick issue could be fixed.
Not to ring up the past...
But, I cannot get my kindle to work with adb to save my life.
I have the adb drivers
Fastboot finds the device
Its stuck in bootloop so the only to communicate with it is though fastboot cable.
please help
eddielane71488 said:
But, I cannot get my kindle to work with adb to save my life.
I have the adb drivers
Fastboot finds the device
Its stuck in bootloop so the only to communicate with it is though fastboot cable.
please help
Click to expand...
Click to collapse
adb doesn't work with fastboot, only fastboot commands work with fastboot.
Stuck in bootloop after accidentally converting KFHD Launcher to user app on Titanium
Please Help! My KFHD IS Stuck in bootloop after I accidentally converted Kindle Launcher from system app to user app on Titanium. the kindle continues to run in the background but the image is stuck on the animated kindle fire logo. Any ideas/help would be really appreciated! Thanks
Compilasian said:
Please Help! My KFHD IS Stuck in bootloop after I accidentally converted Kindle Launcher from system app to user app on Titanium. the kindle continues to run in the background but the image is stuck on the animated kindle fire logo. Any ideas/help would be really appreciated! Thanks
Click to expand...
Click to collapse
Reflash the system img. I don't know if you can make changes to an apk via adb.
Kindle fire stuck in Bootloop > Reply to Thread
Rushead said:
Reflash the system img. I don't know if you can make changes to an apk via adb.
Click to expand...
Click to collapse
Thanks for the reply! Unfortunately, I can't turn ADB debugging on because there is no way to get access to the menu system. Is there another manner of fastbooting and of reflashing image you can possibly recommend to bypass not having access to the launcher? Again thanks in advance!
I'm not sure what is possible via fb other than adb. Try googling flash factory image & see what you find. Sorry I can't be of more help.
Compilasian said:
Thanks for the reply! Unfortunately, I can't turn ADB debugging on because there is no way to get access to the menu system. Is there another manner of fastbooting and of reflashing image you can possibly recommend to bypass not having access to the launcher? Again thanks in advance!
Click to expand...
Click to collapse
Yes,there is. The following commands will flash the boot,recovery and system images while in fastboot.
Code:
fastboot -i 0x1949 flash boot boot.img
fastboot -i 0x1949 flash recovery recovery.img
fastboot -i 0x1949 flash system system.img
Hi im having problems with my kindle fire hd 2nd gen. I rooted and installed cm12 or 13 on it and it was working well but i lost root so i flashed Supersu through twrp now my device is bootlooping on the amazon fire boot screen. I couldn't get into fastboot so bought a fastboot cable which has arrived today (2 weeks from china) now when i plug it in the device goes into fastboot mode but my windows 10 shows it in device manager as Other Devices Tate -pvt-08. I cant issue commands through ADB (adb devices just shows nothing connected) if i enter the getvar command i just get waiting for device. I've reinstalled the kindle device driver and still no joy.
I also made a complete backup of my kindle before i rooted it which i have stored safely. but i need to know how i can push them to my kindle and how to make my laptop see the kindle.
I'm struggling now and pretty lost with it all if someone could lend a hand and tell me what im doing wrong
Corduroysack said:
Hi im having problems with my kindle fire hd 2nd gen. I rooted and installed cm12 or 13 on it and it was working well but i lost root so i flashed Supersu through twrp now my device is bootlooping on the amazon fire boot screen. I couldn't get into fastboot so bought a fastboot cable which has arrived today (2 weeks from china) now when i plug it in the device goes into fastboot mode but my windows 10 shows it in device manager as Other Devices Tate -pvt-08. I cant issue commands through ADB (adb devices just shows nothing connected) if i enter the getvar command i just get waiting for device. I've reinstalled the kindle device driver and still no joy.
I also made a complete backup of my kindle before i rooted it which i have stored safely. but i need to know how i can push them to my kindle and how to make my laptop see the kindle.
I'm struggling now and pretty lost with it all if someone could lend a hand and tell me what im doing wrong
Click to expand...
Click to collapse
hi did you ever figure out the issue? i'm also in the same boat, was running with cm13, tried to flash super su using twrp got the boot loop. will go till the white and orange logo and reboots
thomas69k said:
hi did you ever figure out the issue? i'm also in the same boat, was running with cm13, tried to flash super su using twrp got the boot loop. will go till the white and orange logo and reboots
Click to expand...
Click to collapse
cant remember what i did tbh, ive just fired my kndle up first time in a while and the rom im using is Omni Rom 6.0 its old (2016) but works. i remember using adb to push backed up partition images and literally started from scratch. Not much help but it was quite some time ago
thinking of trying this rom at some point as its 2018
https://www.mediafire.com/folder/u7sb7p10ik7v0/tate
Hello all so took it upon myself to try and help my father out with his tablet. Tried the steps outlined in this post http://forum.xda-developers.com/showpost.php?p=45946493&postcount=3004 The unit wasn't on the 7.2.3 bootloader so i proceeded to flash that before following the steps outline in that post. Not the tablet will try to boot but not stay on. Is there a way for me to save it or is it done?
Tried the following:
This relies on you having a working device (as long as it can boot at all, you're good). If you wish to enter fastboot mode to flash system images like new versions of TWRP or restore Amazon OS 7.2.3 if you've got freezing or bootloops, then you need a regular USB cable that came with the device, or any other mini-USB cable that fits the device and the computer. Again, you need to have Android SDK installed before you can use fastboot. Turn the device off, and leave it unplugged. Go to your computer, open command prompt, and type this:
Code:
fastboot -i 0x1949 getvar product
Hit enter, and it should return with <waiting for device>. If it doesn't, your fastboot drivers aren't working. Install Android SDK and go from there. If it does, connect your turned-off Kindle to the computer. Two things will happen: one, the command prompt will show "Tate-xxx-xxx" (something there), and two, your Kindle should reboot into fastboot mode. To exit fastboot mode, after you finished flashing what you needed, type this:
Code:
fastboot -i 0x1949 reboot
If you can fully boot into the ROM, you can use ADB to boot into fastboot, but you must still use the same command above to reboot out of fastboot mode. Then make sure ADB is turned on through settings, connect the device to the computer using a regular USB cable, and type this:
Code:
adb shell su -c "reboot bootloader"
And that's all for the basics! Let's move on to the actual process.
Click to expand...
Click to collapse
Still nothing the tablet boots to the logo and shuts down. Will i need to purchase one of the fastboot cables or a nexus 7?
If it's a kfhd 7" or kf2, then a fastboot cable is your best bet, the fastboot getvar product command only works on a 8.9" model unless you have 2nd boot loader on the other models.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Damn well that's better then having to pay for a new tablet. I put it on the charger after reading that it may be a charging issue. I know it only trickle charges through USB. It still does the same thing but where the screen would be black behind the kindle fire logo it is green with lines running through it. I will let it charge try again and then buy the cable if anything. Any other thoughts or ideas?
Uh I hope the boot loader isn't damaged too bad, I haven't heard of green lines going through it before, usually if something goes bad with the 2nd bootloader installation process(aka not downgrading first) it results in a red screen. This is probably due to a bad download of the boot loader, that's why it is always key to check the md5sum of the boot loader before you downgrade it.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Aali1011 said:
Damn well that's better then having to pay for a new tablet. I put it on the charger after reading that it may be a charging issue. I know it only trickle charges through USB. It still does the same thing but where the screen would be black behind the kindle fire logo it is green with lines running through it. I will let it charge try again and then buy the cable if anything. Any other thoughts or ideas?
Click to expand...
Click to collapse
Lines in the screens, good LCD screen not withstanding, are not good. Normally this is a firmware issue that required Amazon to send a replacement. Let's hope KFFA restores everything for you.
Sent from my Amazon Kindle Fire HD running CM 10.2 using xda app-developers
LinearEquation said:
Lines in the screens, good LCD screen not withstanding, are not good. Normally this is a firmware issue that required Amazon to send a replacement. Let's hope KFFA restores everything for you.
Sent from my Amazon Kindle Fire HD running CM 10.2 using xda app-developers
Click to expand...
Click to collapse
I let it charge overnight and booted it and it is still only booting to the kindle fire logo and shutting down. Luckily the screen is black now rather than the green I mentioned. So is my best course of action the fast boot cable and then KFFA? I will try the fastboot commands again when i get home. Is KFFA only going to help me in the sense of restoring the files or will it potentially help me with the fastboot process as well? The above method that I used with the fireflash 11 is that proper or should i be doing it some other way?
I personally think the fire flash method is the easiest, some people brick though because they don't follow the instructions properly, I don't think this was the case with you though. That kindle is more than likely not going to go into fastboot with commands, that typically is a 8.9" thing unless you have a successful flash of 2nd bootloader. I know kffa restores the system partition and recovery and boot, but I am unaware if it flashes the boot loader, and I am pretty sure you definitely need to reflash the bootloader since it had lines through it.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Aali1011 said:
I let it charge overnight and booted it and it is still only booting to the kindle fire logo and shutting down. Luckily the screen is black now rather than the green I mentioned. So is my best course of action the fast boot cable and then KFFA? I will try the fastboot commands again when i get home. Is KFFA only going to help me in the sense of restoring the files or will it potentially help me with the fastboot process as well? The above method that I used with the fireflash 11 is that proper or should i be doing it some other way?
Click to expand...
Click to collapse
You must have a fastboot factory cord, not a regular USB. Watch this video to make sure you have your ADB driver set up right http://www.youtube.com/watch?v=oaNM-lt_aHw Use KFFA to restore to 7.2.3. Choose that option as Hashcode has a 7.2.3 boot.img that will match the firmware you will be using, reducing the chance or bootlooping a great deal.
---------- Post added at 05:04 PM ---------- Previous post was at 04:57 PM ----------
Aali1011 said:
I let it charge overnight and booted it and it is still only booting to the kindle fire logo and shutting down. Luckily the screen is black now rather than the green I mentioned. So is my best course of action the fast boot cable and then KFFA? I will try the fastboot commands again when i get home. Is KFFA only going to help me in the sense of restoring the files or will it potentially help me with the fastboot process as well? The above method that I used with the fireflash 11 is that proper or should i be doing it some other way?
Click to expand...
Click to collapse
If your going to use FireFlash, you can go to seokhun's thread and read uo on flashing the 2nd bootloader / TWRP http://forum.xda-developers.com/showthread.php?t=2271909
Some great info about this on Opemsystem's thread as well. http://forum.xda-developers.com/showthread.php?t=2347170
Hashcode's thread has the files you need to flash. If you choose 7.2.3, use boot.img 7.2.3 located right below step 4 of Hascodes thread. Not number 4 of step 2, but right below step 4 and the TWRP 2.6.1.0 in his original post. http://forum.xda-developers.com/showthread.php?t=2128848