Anyone have a flashable zip of the new radio from 5.0.1
Smallsmx3 said:
Anyone have a flashable zip of the new radio from 5.0.1
Click to expand...
Click to collapse
Just download the image and flash the radio separately via fastboot.
Pilz said:
Just download the image and flash the radio separately via fastboot.
Click to expand...
Click to collapse
Some of us would rather save on data caps and the like by only downloading the kilobytes we need instead of hundreds of megabytes...nvm slow download speeds.
Use Fastboot or Attempt Flashify. This is not a ZIP and is an .img 63MB
Nexus 6 LRX22C 5.0.1 OTA Radio IMG pull
Skripka said:
Some of us would rather save on data caps and the like by only downloading the kilobytes we need instead of hundreds of megabytes...nvm slow download speeds.
Click to expand...
Click to collapse
I download images using WiFi on my laptop so I can use fastboot. I don't think you can flash images outside of fastboot but I could be wrong.
crashercarlton said:
Use Fastboot or Attempt Flashify. This is not a ZIP and is an .img 63MB
Nexus 6 LRX22C 5.0.1 OTA Radio IMG pull
Click to expand...
Click to collapse
Flashed fine in Nexus Root Tool under Advanced>Baseband
Pilz said:
I download images using WiFi on my laptop so I can use fastboot. I don't think you can flash images outside of fastboot but I could be wrong.
Click to expand...
Click to collapse
Yea well...many USA people are cursed with landline ISPs that have caps too.
Skripka said:
Flashed fine in Nexus Root Tool under Advanced>Baseband
Yea well...many USA people are cursed with landline ISPs that have caps too.
Click to expand...
Click to collapse
I have Comcast so I guess each is just as bad.
Also there is an OP with flashable zips of the radios.
http://forum.xda-developers.com/showthread.php?t=2969380
Pilz said:
I have Comcast so I guess each is just as bad.
Also there is an OP with flashable zips of the radios.
http://forum.xda-developers.com/showthread.php?t=2969380
Click to expand...
Click to collapse
Flashable zips not yet done, have to study for exams but if someone does the flashable zip I'll include it to OP and give credits
The standalone .img files are there though. You'd just need to make a zip to the partition with modem @ /dev/block/platform/msm_sdcc.1/by-name/modem
Related
I haven't been able to find stock .img files for anything...
Most especially need a stock boot.img and a stock recovery.img
It would nice to have all of them though. Where can these be found?
Yes i also would love those files, or another way to get my phone COMPLETELY back to stock. Recovery and everything... if possible
I could use a stock boot.img as well... that is the correct size to flash with fastboot.
+1
10chars
Koush has the the stock boot.img: http://koush.tandtgaming.com/samsung/crespo/
But it wont flash with fastboot.
He said we need to truncate it so it will flash via fastoot.
Anyone knows how to do this?
clubtech said:
+1
10chars
Koush has the the stock boot.img: http://koush.tandtgaming.com/samsung/crespo/
But it wont flash with fastboot.
He said we need to truncate it so it will flash via fastoot.
Anyone knows how to do this?
Click to expand...
Click to collapse
Yeah, I have that one as well. But it doesn't work with fastboot. It's too big. I'm going to wait until someone links the correct boot.img for fastboot.
I just posted a thread with aosp images. The factory images everyone wants aren't available from google yet unfortunately, however the ones I posted should work just fine.
People reported not being able to flash the OTA with your AOSP img's
jroid said:
I just posted a thread with aosp images. The factory images everyone wants aren't available from google yet unfortunately, however the ones I posted should work just fine.
Click to expand...
Click to collapse
Will those allow you to update the new OTA update?
I'm pretty sure that is why everyone wants the stock boot.img right now.
edit: Nope that boot.img won't allow you to update, at least not through CWR. I get an error. Also breaks wifi (assuming wifi works if you flash all the .imgs).
Luxferro said:
Will those allow you to update the new OTA update?
I'm pretty sure that is why everyone wants the stock boot.img right now.
edit: Nope that boot.img won't allow you to update, at least not through CWR. I get an error. Also breaks wifi (assuming wifi works if you flash all the .imgs).
Click to expand...
Click to collapse
I fixed the wifi bug. See my thread's OP. As far as the not being able to update, it's a recovery issue, and nothing to do with the boot.img
jroid said:
I fixed the wifi bug. See my thread's OP. As far as the not being able to update, it's a recovery issue, and nothing to do with the boot.img
Click to expand...
Click to collapse
k, I'll check out your fix. And then flash back the original recovery and try again.
jroid said:
I fixed the wifi bug. See my thread's OP. As far as the not being able to update, it's a recovery issue, and nothing to do with the boot.img
Click to expand...
Click to collapse
Thanks for fixing the wifi on those, but the update still won't flash using this boot.img (sadly) and CWM.
Koush is claiming that we really need the stock boot.img.
To do the update just do the nandroid for it that the other guy posted around here... It works well
here you go: http://forum.xda-developers.com/showthread.php?t=884416
Worked great! Allowed me to update to 2.3.1.
also this will work:
http://forum.xda-developers.com/showpost.php?p=10029195&postcount=19
Here's the full System Dump from the Image that Google released yesterday and posted on their site:here:
https://developers.google.com/android/nexus/images#occamjop40c
I mounted, extracted, and zipped up the entire system dump from the system.img for download here:
DOWNLOAD SYSTEM DUMP HERE
MD5 Sum: 0a77c580900be234ddc86b7ff459c185
Mount points, thanks to mskip can be found HERE
This should give everyone a chance to start working on their ROMs for the device before they have them in hand. I know I'll start mine tomorrow.
Enjoy!
Why is this needed when we already have the factory image direct from Google?
EddyOS said:
Why is this needed when we already have the factory image direct from Google?
Click to expand...
Click to collapse
The image has been extracted and ready to deodex, or whatever you like to build your ROM.
If you have to ask the question..........
Maybe I should give it a try. Thanks
ATGAdmin said:
The
EddyOS said:
Why is this needed when we already have the factory image direct from Google?
Click to expand...
Click to collapse
image has been extracted and ready to deodex, or whatever you like to build your ROM.
If you have to ask the question..........
Click to expand...
Click to collapse
I sorta think that's his point, if you know what your doing, you can extract it yourself, it's like a 2 minute process.
I suppose this could be useful for people with really slow internet connections who would rather have just the system.img than the whole thing.
USSENTERNCC1701E said:
I sorta think that's his point, if you know what your doing, you can extract it yourself, it's like a 2 minute process.
I suppose this could be useful for people with really slow internet connections who would rather have just the system.img than the whole thing.
Click to expand...
Click to collapse
Well over 50 download since it was posted last night, so someone plans on using it.
Some things never change At XDA.
Try and be helpful, and......
Sent from my H D'licious Maxxx!
Can someone point me to a flashable zip for the update as well as the flashable for radio of its out. I've been gone for a while and would appreciate the help
I am on T-Mobile and currently on CleanRom 2.2. I would like to get to LYZ28E and keep root and data
I dont wish to wipe data and I am unencrypted and would like to stay that way
Anyone?
irock1985 said:
Anyone?
Click to expand...
Click to collapse
All of this info is readily available and accessible via search. You have to download the LYZ28E factory image. Unzip and extract the system image. Flash the system image via fastboot. You will have to flash TWRP again and SuperSU but you won't lose your data.
Evolution_Tech said:
All of this info is readily available and accessible via search. You have to download the LYZ28E factory image. Unzip and extract the system image. Flash the system image via fastboot. You will have to flash TWRP again and SuperSU but you won't lose your data.
Click to expand...
Click to collapse
Thanks for your reply... So basically no TWRP flashable way to do it. I did search for the radio update but I couldn't find anything though it may be because I am on Tapatalk
irock1985 said:
Thanks for your reply... So basically no TWRP flashable way to do it. I did search for the radio update but I couldn't find anything though it may be because I am on Tapatalk
Click to expand...
Click to collapse
Radios:
http://forum.xda-developers.com/showthread.php?t=2969380
Evolution_Tech said:
Radios:
http://forum.xda-developers.com/showthread.php?t=2969380
Click to expand...
Click to collapse
Thanks again appreciate it.... Time is very short these days (which is why I've been MIA) but I saw my wife had wifi calling now so its time to update. [emoji106]
I need the stock recovery image (from 23.16.3.victara_retca.retca.en.CA) so I can flash the 6.0 update since it won't work with TWRP.
Any help? Google isn't providing me with much.
Does it have to be from the Canadian variant (not sure if the recovery images are different between variants)?
Tried looking here for the correct zip, which should contain the recovery image?
ellisbodds said:
Does it have to be from the Canadian variant (not sure if the recovery images are different between variants)?
Tried looking here for the correct zip, which should contain the recovery image?
Click to expand...
Click to collapse
I have no clue. I doubt it would have to be the retCA version. I'm sure everything besides radio and system will be the same.
This is from the latest RETCA XT1097 5.1 firmware:
VICTARA_RETCA_XT1097_5.1_LPE23.32-48.3_cid14_CFC.xml.zip
ellisbodds said:
Does it have to be from the Canadian variant (not sure if the recovery images are different between variants)?
Tried looking here for the correct zip, which should contain the recovery image?
Click to expand...
Click to collapse
Gus.Ottawa said:
This is from the latest RETCA XT1097 5.1 firmware:
VICTARA_RETCA_XT1097_5.1_LPE23.32-48.3_cid14_CFC.xml.zip
Click to expand...
Click to collapse
Thank you both! I'll play around with these files and make it work
DonDizzurp said:
Thank you both! I'll play around with these files and make it work
Click to expand...
Click to collapse
Any update on whether this worked for you? I'm in the same boat
jullyfush said:
Any update on whether this worked for you? I'm in the same boat
Click to expand...
Click to collapse
Worked perfectly.
My process
- Flash stock 5.1 using fastboot (Steps can be found on Motorola's site or somewhere on XDA)
- Install Marshmallow OTA
- Flash cracked boot.img for Marshmallow. This step is needed in order for TWRP to stick and for you to root without getting stuck on the warning screen. (I'll find the link for you if you can't. It's somewhere on XDA.)
- Flash TWRP
- Create backup so I don't have to go through this process next time haha
DonDizzurp said:
Worked perfectly.
My process
- Flash stock 5.1 using fastboot (Steps can be found on Motorola's site or somewhere on XDA)
- Install Marshmallow OTA
- Flash cracked boot.img for Marshmallow. This step is needed in order for TWRP to stick and for you to root without getting stuck on the warning screen. (I'll find the link for you if you can't. It's somewhere on XDA.)
- Flash TWRP
- Create backup so I don't have to go through this process next time haha
Click to expand...
Click to collapse
Awesome! Thanks for the tip. I got as far as the 6.0 OTA (RETCA), and am now trying to get root back again. Where did you find the cracked boot.img?
Cheers!
jullyfush said:
Awesome! Thanks for the tip. I got as far as the 6.0 OTA (RETCA), and am now trying to get root back again. Where did you find the cracked boot.img?
Cheers!
Click to expand...
Click to collapse
Grab it from here
http://forum.xda-developers.com/moto-x-2014/development/root-root-moto-x-2014-android-t3249105
DonDizzurp said:
Grab it from here
http://forum.xda-developers.com/moto-x-2014/development/root-root-moto-x-2014-android-t3249105
Click to expand...
Click to collapse
Something odd has happened since upgrading to 6.0.
'adb devices' still sees my phone, but 'fastboot devices' no longer sees anything, and making a desktop back-up with adb now creates a file containing 0 bytes.
Everything else seems fine. Are there some new permissions I need to give before this will work?
Thanks again.
Edit: I managed to get fastboot working, however now I've run into a new problem.
To confirm, when you say flash the cracked boot.img for Marshmallow, I should execute 'fastboot flash boot boot.img' for the cracked boot.img?
I'm getting the error: mismatched partition size (boot)
I can still enter TWRP with fastboot, but it's not permanent without the cracked boot.img
Am I missing a step?
Edit #2: Finally got TWRP to stick another way and have root now. Thanks for everything!
Is it available? Or it is too early? thanks
I would really love it if we could get this.
The Nexus 6P already got it.
hopefully someone's working on one. If I knew how I would.
Android N Developer Preview OTA image - it is official flashable zip. So, we need someone who grub this OTA link.
droid-life.com/2014/06/05/download-nexus-ota-url-file/
Very surprised still we haven't got it.
manikandanguru said:
Very surprised still we haven't got it.
Click to expand...
Click to collapse
i used twrp to flash the N boot.img and system.img, since twrp flashes img files now. and i ended up dirty flashing it over pure nexus. took about 4 minutes.
simms22 said:
i used twrp to flash the N boot.img and system.img, since twrp flashes img files now. and i ended up dirty flashing it over pure nexus. took about 4 minutes.
Click to expand...
Click to collapse
If I want to flash it as my primary I would have done it when it was released.
I want to test it as a secondary rom using MultiROM.
It supports only flashable zip.
manikandanguru said:
If I want to flash it as my primary I would have done it when it was released.
I want to test it as a secondary rom using MultiROM.
It supports only flashable zip.
Click to expand...
Click to collapse
Tried that already, its not working with Multirom
I believe this is the link you're looking for
https://android.googleapis.com/pack...f7750fa94.signed-signed-shamu-ota-2659757.zip
I haven't done it but people are saying this works with multirom
danstah said:
I believe this is the link you're looking for
https://android.googleapis.com/pack...f7750fa94.signed-signed-shamu-ota-2659757.zip
I haven't done it but people are saying this works with multirom
Click to expand...
Click to collapse
Can this be flashable as secondary rom in MultiROM?
manikandanguru said:
Can this be flashable as secondary rom in MultiROM?
Click to expand...
Click to collapse
That was my understanding. I'm downloading right now to try it.
danstah said:
That was my understanding. I'm downloading right now to try it.
Click to expand...
Click to collapse
Downloading too.. Lets see
It's working with MultiRom for me.
danstah said:
I believe this is the link you're looking for
https://android.googleapis.com/pack...f7750fa94.signed-signed-shamu-ota-2659757.zip
I haven't done it but people are saying this works with multirom
Click to expand...
Click to collapse
Thanks man!
danstah said:
It's working with MultiRom for me.
Click to expand...
Click to collapse
This is the same file name and size as the link in the OTA thread to go to NPC56P from MMB29V. Not that I doubt you, but are you sure that this will install as is as secondary in MultiROM?
simms22 said:
i used twrp to flash the N boot.img and system.img, since twrp flashes img files now. and i ended up dirty flashing it over pure nexus. took about 4 minutes.
Click to expand...
Click to collapse
Can you link system and boot IMG plz
fubugang said:
Can you link system and boot IMG plz
Click to expand...
Click to collapse
i downloaded it then unzipped it.. then just pulled it out of N. i dont have anyplace to upload to at the moment, sorry.
fubugang said:
Can you link system and boot IMG plz
Click to expand...
Click to collapse
You can just pull them from Google's .tgz image file.
JimSmith94 said:
This is the same file name and size as the link in the OTA thread to go to NPC56P from MMB29V. Not that I doubt you, but are you sure that this will install as is as secondary in MultiROM?
Click to expand...
Click to collapse
Yup can confirm it works as a secondary ROM
fubugang said:
Can you link system and boot IMG plz
Click to expand...
Click to collapse
it'll be quicker downloading it then pulling it out. its only 842mb, the system.img unzipped is 1.2gb.