Database Develop

HTC One 4.3 to 4.4 problem.

Hi guys,
So today I got the 4.4 OTA update on my HTC One M7.
Of course I downloaded it and the phone entered into boot loop - "No command" and "Error".
Via pressing POWER + VOLUME DOWN I entered into the service screen, where I have the following options:
***LOCKER***
M7_UL PVT SHIP S-OFF RH
CID-GOOGL001
HBOOT-1.54.0000
RADIO-4A.18.3263.15
OpenDSP-v31.120.274.0617
OS-3.07.1700.1
eMMC-boot 2048 MB
Aug 19 2013, 21:01:47.0
FASTBOOT
RECOVERY
FACTORY RESET
SIMLOCK
IMAGECRC
SHOW BARCODE
I have tried doing FACTORY reset, but to no luck the phone goes into Erasing mode and then again into the "No command" and "Error" loop.
I don't have the htc one USB drivers currently on my Windows 8.1 laptop.
Could you advice me how to proceed.
Thanks in advance.

I am offering a reward for any help.

You need to fix your driver issue FIRST..
Then unlock bootloader using fastboot oem unlock
As you are S-OFF, you can then run the fastboot flash ruu.zip. Follow the steps from: http://forum.xda-developers.com/showthread.php?t=2358781

[Q] HTC ONE Bricked?

I rooted my HTC one m7 AT&T then tried unrooting it and now it wont turn on but it goes to the bootloader screen.
***TAMPERED***
***UNLOCKED***
M7_UL PVT SHIP S-ON RH
HBOOT-1.57.0000
RADIO-4M.27.3218.14
OpenDSP-v32.120.274.0909
0S-
eMMC- boot 2048MB
Apr 22 2014,01:10:58.0
Any Help?

SmithMyster said:
I rooted my HTC one m7 AT&T then tried unrooting it and now it wont turn on but it goes to the bootloader screen.
***TAMPERED***
***UNLOCKED***
M7_UL PVT SHIP S-ON RH
HBOOT-1.57.0000
RADIO-4M.27.3218.14
OpenDSP-v32.120.274.0909
0S-
eMMC- boot 2048MB
Apr 22 2014,01:10:58.0
Any Help?
Click to expand...
Click to collapse
Follow alray's procedure it should help.

Adb push rom.zip /sdcard/
majmoz said:
Follow alray's procedure it should help.
Click to expand...
Click to collapse
When i got to the twrp and type in adb push rom.zip /sdcard/ it says waiting for device but my htc worked when i put it in bootloader it popped up and didnt say waiting for device or no device

Did you do the command fastboot oem writesecureflag 3?
Going back to s-on on hboot higher than 1.54 will result in a tamper detected message, the phone reboots to the bootloader and the only way to proceed is to unlock the bootloader again
You need to S off again to get rid of the tampered message
If you NEED to go s-on, you're better running an earlier RUU once s-off for an earlier hboot and then go s-on
My opinion - stay s off

stovie_steve said:
Did you do the command fastboot oem writesecureflag 3?
Going back to s-on on hboot higher than 1.54 will result in a tamper detected message, the phone reboots to the bootloader and the only way to proceed is to unlock the bootloader again
You need to S off again to get rid of the tampered message
If you NEED to go s-on, you're better running an earlier RUU once s-off for an earlier hboot and then go s-on
My opinion - stay s off
Click to expand...
Click to collapse
What is the eastiest way to go s-off?

SmithMyster said:
What is the eastiest way to go s-off?
Click to expand...
Click to collapse
Easiest way - sunshine method. Will cost you $25 though, but it's worth it
Long way/not guaranteed to work - Firewater method. Several posts on the forum about different combos of Roms/kernels required to make it work, but if you get a whelp message running it you have to use sunshine method only

SmithMyster said:
When i got to the twrp and type in adb push rom.zip /sdcard/ it says waiting for device but my htc worked when i put it in bootloader it popped up and didnt say waiting for device or no device
Click to expand...
Click to collapse
With the phone in TWRP and connected to the computer type:
adb devices
You should see your Serial Number and next to it recovery. If not, then adb is not seeing your device and you will need to redo the procedure over again. Check to see if your drivers are installed correctly and that your computer recognizes your phone. Check the prerequisites for HTC drivers installed.
1. Reboot your computer
2. Put your phone in bootloader
3. Type: fastboot devices >>>> You should see your device serial number
4. Put your phone in recovery
5. Type: adb devices >>>> You should see your device serial number
6. Now try step 5 of alray's procedure.

majmoz said:
With the phone in TWRP and connected to the computer type:
adb devices
You should see your Serial Number and next to it recovery. If not, then adb is not seeing your device and you will need to redo the procedure over again. Check to see if your drivers are installed correctly and that your computer recognizes your phone. Check the prerequisites for HTC drivers installed.
1. Reboot your computer
2. Put your phone in bootloader
3. Type: fastboot devices >>>> You should see your device serial number
4. Put your phone in recovery
5. Type: adb devices >>>> You should see your device serial number
6. Now try step 5 of alray's procedure.
Click to expand...
Click to collapse
agree, sounds like the drivers are not installed correctly. That would explain why the phone is recognized in bootloader (fasboot) but not in recovery (adb)
@SmithMyster
When you are booted in recovery, open the windows device manager and confirm that your phone is listed as "Android USB device --> My HTC". If your phone is listed as "Other Devices --> One" when booted in recovery then re-install the drivers following the procedure from nkk71 (included in the guide)

ERROR RumRunner
How to get by Error RumRunner try again and read (Is Debuggin On?)
I Cant turn on my phone on to fix that!
any help?

SmithMyster said:
How to get by Error RumRunner try again and read (Is Debuggin On?)
I Cant turn on my phone on to fix that!
any help?
Click to expand...
Click to collapse
You're phone needs to be able to boot up in order for rumrunner to work. Do you currently have a working Rom on your phone? If not, have you tried sideloading a Rom via recovery?

htc one m7 maybe bricked

Hello Bro
I have a big problem with my htc one m7
I try to put a new rom and i think i bricked the phone
On the start it says
******unlocked*******
m7_wls pvt ship s-off rh
cid-111111111
hboot-1.61.0000
opendsp-v35.120.274.0718
os-6.23.651.10
emmc-boot 2048mb
sep 22 2015,18:46:32.8609
hboot
fastboot
recovery
factory reset
simlock
check smartsd
image crc
xhow barcode
After when i put it on the laptop i heard a noise but computer don't find the htc .
When i use fastboot and adb computer says no device.
i put all the drivers adb htc sync but computer don t find htc in the control panel.
i make the recovery on the phone but ut just restart and dont go in the recovery.
Try to help me bro please.

stephanelie said:
Hello Bro
I have a big problem with my htc one m7
I try to put a new rom and i think i bricked the phone
Click to expand...
Click to collapse
What rom exactly (Provide a link)
On the start it says
******unlocked*******
m7_wls pvt ship s-off rh
cid-111111111
hboot-1.61.0000
opendsp-v35.120.274.0718
os-6.23.651.10
emmc-boot 2048mb
sep 22 2015,18:46:32.8609
hboot
fastboot <-------- Select this to use fastboot commands
recovery
factory reset
simlock
check smartsd
image crc
xhow barcode
After when i put it on the laptop i heard a noise but computer don't find the htc .
When i use fastboot and adb computer says no device.
Click to expand...
Click to collapse
Adb commands will not work from the bootloader, only from a booted OS or from custom recovery. Only fastboot commands will work in bootloader mode but you have to be in the fastboot menu (See above in red).
i put all the drivers adb htc sync but computer don t find htc in the control panel.
Click to expand...
Click to collapse
You want the drivers only, uninstall HTC Sync as it can interfer with fastboot/adb commands.
i make the recovery on the phone but ut just restart and dont go in the recovery.
Click to expand...
Click to collapse
What recovery did you installed? (provide a link)

HTC M7 Stuck On Bootloader After Update Failure

Please - I Need Urgent Help from anyone who knows...Please , please help.
I got a new HTC M7 and Tried RUU.Exe (RUU_M7_WL_L50_SENSE60_SPCS_MR_Sprint_WWE_6.23.651 .10) update ....
The update was failed with error 152 ....(I have tried it many times but failed again and again)
Now The phone is just displaying 4 triangles at corners with black HTC Logo.
It is showing (when try power + Volume down , for recovery)
***unlocked***
M7-WLS PVT SHIP S-ON RH
Hboot- 1.61.0000
Radio- 1.02.20.0922
Opendsp - v35-120-274-0710
OS - 6.23.651.10
emmc-boot 2048MB
sep 22.2015 time...
RUU..
There is no other option (like fastboot , recovery or any thing below RUU .....
It is not detecting as storage in widnows but shows as My HTC in device manager of PC
I have tried to Flash/Push Firmware through fastboot/adb but it fails...

faheem1982 said:
Please - I Need Urgent Help from anyone who knows...Please , please help.
I got a new HTC M7 and Tried RUU.Exe (RUU_M7_WL_L50_SENSE60_SPCS_MR_Sprint_WWE_6.23.651 .10) update ....
The update was failed with error 152 ....(I have tried it many times but failed again and again)
Now The phone is just displaying 4 triangles at corners with black HTC Logo.
It is showing (when try power + Volume down , for recovery)
***unlocked***
M7-WLS PVT SHIP S-ON RH
Hboot- 1.61.0000
Radio- 1.02.20.0922
Opendsp - v35-120-274-0710
OS - 6.23.651.10
emmc-boot 2048MB
sep 22.2015 time...
RUU..
There is no other option (like fastboot , recovery or any thing below RUU .....
It is not detecting as storage in widnows but shows as My HTC in device manager of PC
I have tried to Flash/Push Firmware through fastboot/adb but it fails...
Click to expand...
Click to collapse
Simple:You must relock the bootloader to flash a RUU on a S-ON phone. Relock it and flash the RUU again.
fastboot oem lock

I have tried this
alray said:
Simple:You must relock the bootloader to flash a RUU on a S-ON phone. Relock it and flash the RUU again.
fastboot oem lock
Click to expand...
Click to collapse
I have tried this also...Relocked ..But update failed again..
***Relocked***
S-ON
Same result

faheem1982 said:
I have tried this also...Relocked ..But update failed again..
***Relocked***
S-ON
Same result
Click to expand...
Click to collapse
Keep it locked, its must be in this state to flash a RUU.
What is the error when trying to flash the ruu exactly? Is it still error 152?

Sometimes same sometimes different
alray said:
Keep it locked, its must be in this state to flash a RUU.
What is the error when trying to flash the ruu exactly? Is it still error 152?
Click to expand...
Click to collapse
After doing that, it is same error once... 152
then when I attempted again in relocked state..It given error 132
Third time it given error number 155...
Mostly it is either 152 or 155 ..When I check Phone screen after getting error
"Partition Update Fail"

[Q] Blinking Red Light When Charging and Stuck in Bootloader

Hi everyone,
I'll start with this is a Rogers phone (Canadian HTC One M7).
Did some digging around the forum and I'm not sure where to go from here.
I tried the bright light near censor and leaving it plugged in for 72 hours.
Haven't been able to get it to boot, can only boot into bootloader.
Windows 10 only recognizes it as "unknown device in device manager" even after I've installed the usb drivers.
Windows 10 can't see it as a fastboot device, have tried multiple ports and cables.
Pretty sure I need Windows 7 to properly attempt resetting this.
Can't boot into recovery as it just boot loops after selecting it.
I'm not sure what I was last running, I believe CM 10.1. Haven't used the phone in over 18 months.
My bootloader reads as follows:
*** UNLOCKED ***
M7_UL PVT SHIP S-OFF RH
CID-ROGER001
HBOOT-1.44.0000
RADIO-4T.21.3218.21
OpenDSP-v26.120.274.0202
eMMC-boot
May 4, 2013, 14:29:10 -1
My only options are
FASTBOOT
RECOVERY
FACTORY RESET
SIMLOCK
IMAGE CRC
SHOW BARCODE
I don't get the FASTBOOT USB setting on the phone when running the fastboot prompts so I'm not sure where to go from here.

Esposition said:
Hi everyone,
I'll start with this is a Rogers phone (Canadian HTC One M7).
Did some digging around the forum and I'm not sure where to go from here.
I tried the bright light near censor and leaving it plugged in for 72 hours.
Haven't been able to get it to boot, can only boot into bootloader.
Windows 10 only recognizes it as "unknown device in device manager" even after I've installed the usb drivers.
Windows 10 can't see it as a fastboot device, have tried multiple ports and cables.
Pretty sure I need Windows 7 to properly attempt resetting this.
Can't boot into recovery as it just boot loops after selecting it.
I'm not sure what I was last running, I believe CM 10.1. Haven't used the phone in over 18 months.
My bootloader reads as follows:
*** UNLOCKED ***
M7_UL PVT SHIP S-OFF RH
CID-ROGER001
HBOOT-1.44.0000
RADIO-4T.21.3218.21
OpenDSP-v26.120.274.0202
eMMC-boot
May 4, 2013, 14:29:10 -1
My only options are
FASTBOOT
RECOVERY
FACTORY RESET
SIMLOCK
IMAGE CRC
SHOW BARCODE
I don't get the FASTBOOT USB setting on the phone when running the fastboot prompts so I'm not sure where to go from here.
Click to expand...
Click to collapse
your connectivity issue is because hboot 1.44, you'll need xp or 7 to use fastboot. once you get that working you could try to flash a ruu

alray said:
your connectivity issue is because hboot 1.44, you'll need xp or 7 to use fastboot. once you get that working you could try to flash a ruu
Click to expand...
Click to collapse
Thanks a lot bud, I used to be really good with all this when the phone first came out. Forgot a lot of the specifics since then.