[Q] HTC One M7 Vodafone RUU - One (M7) Q&A, Help & Troubleshooting

Hi,
I'm currently looking to turn my HTC One back to stock. It's unlocked but it had Vodafone UK branding and I can't seem to find the correct RUU in order to restore it to stock.
This is my CID and MID:
INFOmodelid: PN0710000
INFOcidnum: VODAP001
Firmware version is: 6.12.161.8
Hboot versionis: 1.57.0000
Could someone help me find the correct RUU? I would really appreciate it as I would like OTA updates ready for the official lollipop release coming in early 2015.
Thanks,
~ 5H1R42 ~

5H1R42 said:
Hi,
I'm currently looking to turn my HTC One back to stock. It's unlocked but it had Vodafone UK branding and I can't seem to find the correct RUU in order to restore it to stock.
This is my CID and MID:
INFOmodelid: PN0710000
INFOcidnum: VODAP001
Firmware version is: 6.12.161.8
Hboot versionis: 1.57.0000
Could someone help me find the correct RUU? I would really appreciate it as I would like OTA updates ready for the official lollipop release coming in early 2015.
Thanks,
~ 5H1R42 ~
Click to expand...
Click to collapse
I already answered this in your other thread:
Post #2:
alray said:
there is no 4.4.3 ruu, only older versions and will require s-off to be used.
what is your "fastboot getvar all" ?
Click to expand...
Click to collapse
Post #6:
alray said:
I don't understand, you said that you have flashed an Asian RUU but according to your getvar, everything is 100% stock Vodaphone version. Your phone is s-on which prevent to flash the wrong RUU and there is no RUU for that version which make me beleive what you said at post #1 is incorrect.
(...)
Click to expand...
Click to collapse
So again, if you want to use a RUU (and there is none for your version) you will need S-OFF.
If you don't want to s-off and you want to be able to receive ota updates again then your only hope is a 6.12.161.8 nandroid backup, because there is no 6.12.161.8 RUU and afaik there is no x.xx.161.x RUU.

alray said:
I already answered this in your other thread:
Post #2:
Post #6:
So again, if you want to use a RUU (and there is none for your version) you will need S-OFF.
If you don't want to s-off and you want to be able to receive ota updates again then your only hope is a 6.12.161.8 nandroid backup, because there is no 6.12.161.8 RUU and afaik there is no x.xx.161.x RUU.
Click to expand...
Click to collapse
Right, I just found a 6.12.161.9 recovery here. If i flash this recovery on as an update, will i get OTA updates back and be back to normal?

Related

[Solved] Back to stock

All right, here comes a noob question:
My HTC One is from Israel, and though I made a nandroid backup of my phone after I rooted it, I don't have one from before my rooting it. That said, my CID was HTC__K18...there is no RUU for that CID, so I used rumrunner to s-off my phone, changed my CID to HTC__01 and used the European RUU (the U not the UL because my phone is a U) to get %100 back to stock. The RUU that I flashed has a hboot of 1.44 and my stock was already a 1.54 and 4.2.2 (maybe 4.1.2?)...anyway after flashing the RUU, I'm not able to OTA and I really just want to get %100 stock...in a way that I'd be capable of receiving all the updates OTA and have the highest firmware/software. Thanks in advance!
Oh, and here's some of my info:
version-bootloader: 1.44.0000 (it shipped with 1.54 but I RUUed an older version)
version-baseband: 4A.14.3250.13
version-main: 1.29.401.2 (it shipped with 2.24.401.2)
version-misc: PVT SHIP S-OFF (used rumrunner to s-off hboot of 1.54)
product: m7_u
platform: HBOOT-8064
modelid: PN0711000
cidnum: HTC__001 (I changed the cid from HTC__k18)
shpongleeyes said:
All right, here comes a noob question:
My HTC One is from Israel, and though I made a nandroid backup of my phone after I rooted it, I don't have one from before my rooting it. That said, my CID was HTC__K18...there is no RUU for that CID, so I used rumrunner to s-off my phone, changed my CID to HTC__01 and used the European RUU (the U not the UL because my phone is a U) to get %100 back to stock. The RUU that I flashed has a hboot of 1.44 and my stock was already a 1.54 and 4.2.2 (maybe 4.1.2?)...anyway after flashing the RUU, I'm not able to OTA and I really just want to get %100 stock...in a way that I'd be capable of receiving all the updates OTA and have the highest firmware/software. Thanks in advance!
Oh, and here's some of my info:
version-bootloader: 1.44.0000 (it shipped with 1.54 but I RUUed an older version)
version-baseband: 4A.14.3250.13
version-main: 1.29.401.2 (it shipped with 2.24.401.2)
version-misc: PVT SHIP S-OFF (used rumrunner to s-off hboot of 1.54)
product: m7_u
platform: HBOOT-8064
modelid: PN0711000
cidnum: HTC__001 (I changed the cid from HTC__k18)
Click to expand...
Click to collapse
Question: where do you want to go?
1- To an European stock model
2- To your version (I have a nandroid of 2.24.401.2 for a PN0711000, M7_U)
nkk71 said:
Question: where do you want to go?
1- To an European stock model
2- To your version (I have a nandroid of 2.24.401.2 for a PN0711000, M7_U)
Click to expand...
Click to collapse
Whatever would give me OTA updates and allow me to be as stock as possible! Just out of curiosity, what would the benefits of each be? Thank you!
shpongleeyes said:
Whatever would give me OTA updates and allow me to be as stock as possible! Just out of curiosity, what would the benefits of each be? Thank you!
Click to expand...
Click to collapse
LOL, this just resulted in another question: why not use a custom ROM, they get updated way more frequently than OTAs? If you want "stock as possible" you can check out ARHD, it's very stock. (and since you're S-Off you can upgrade/downgrade anytime, including firmware!!)
As for benefits of the other two options:
1) I think HTC__001 (or was it Y13, not sure), are usually among the first WWE editions to get OTAs (not as fast as custom ROMs )
2) HTC_K18 would put you back to a state where you bought the phone.
It's all personal choice, eg I like stock but want it rooted so I'm currently running ARHD 13.3 (until I decide to upgrade), others like their Venom Tweaks or InsertCoin etc... and again for others they need to be unrooted because of some banking apps.
So give it a thought and let me know, which road you wanna take
PS: Hit the thanks button if I helped
nkk71 said:
LOL, this just resulted in another question: why not use a custom ROM, they get updated way more frequently than OTAs? If you want "stock as possible" you can check out ARHD, it's very stock. (and since you're S-Off you can upgrade/downgrade anytime, including firmware!!)
As for benefits of the other two options:
1) I think HTC__001 (or was it Y13, not sure), are usually among the first WWE editions to get OTAs (not as fast as custom ROMs )
2) HTC_K18 would put you back to a state where you bought the phone.
It's all personal choice, eg I like stock but want it rooted so I'm currently running ARHD 13.3 (until I decide to upgrade), others like their Venom Tweaks or InsertCoin etc... and again for others they need to be unrooted because of some banking apps.
So give it a thought and let me know, which road you wanna take
PS: Hit the thanks button if I helped
Click to expand...
Click to collapse
Thank you for the quick reply!
Okay, so I'd like to go with the European road...as far as custom ROMs are concerned, I had ARHD, both GE and Sense, but I just want things to run smoothly and not worry about OTAs....I'd like to receive them as soon as they're available with the least amount of headache...
On that note, can I receive OTA updates directly from HTC while I'm s-off? Because currently I don't have that option...it doesn't even show that I have an update available.
Also, is your nandroid of 2.24.401.2 made with cid HTC__k18?
P.s. I don't even need/want to root the phone again...it's just too much for me. I'd like to get as stock as possible while keeping the options open (that's why I want to leave s-off).
Thank you again for your help! You're awesome!
shpongleeyes said:
Thank you for the quick reply!
Okay, so I'd like to go with the European road...as far as custom ROMs are concerned, I had ARHD, both GE and Sense, but I just want things to run smoothly and not worry about OTAs....I'd like to receive them as soon as they're available with the least amount of headache...
On that note, can I receive OTA updates directly from HTC while I'm s-off? Because currently I don't have that option...it doesn't even show that I have an update available.
P.s. I don't even need/want to root the phone again...it's just too much for me. I'd like to get as stock as possible while keeping the options open (that's why I want to leave s-off).
Thank you again for your help! You're awesome!
Click to expand...
Click to collapse
Ok, European road
1- You've already changed your CID, you still need to change your MID: "fastboot oem writemid PN0710000"
(keep a record of your original CID, MID, and software/firmware version somewhere in case you ever need it)
2- remove tampered either using revone or http://forum.xda-developers.com/showthread.php?t=2477792
3- set your phone to LOCKED (not relocked) using revone or http://forum.xda-developers.com/showthread.php?t=2475914
4- then use the full European RUU: http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/
you should keep S-Off and not go back S-On.
After installing the RUU you should immediately start receiving OTAs all the way up to 3.62
PS: remember the above procedure will wipe everything off your phone, so back up anything you may need first!!
nkk71 said:
Ok, European road
1- You've already changed your CID, you still need to change your MID: "fastboot oem writemid PN0710000"
(keep a record of your original CID, MID, and software/firmware version somewhere in case you ever need it)
2- remove tampered either using revone or http://forum.xda-developers.com/showthread.php?t=2477792
3- set your phone to LOCKED (not relocked) using revone or http://forum.xda-developers.com/showthread.php?t=2475914
4- then use the full European RUU: http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/
you should keep S-Off and not go back S-On.
After installing the RUU you should immediately start receiving OTAs all the way up to 3.62
PS: remember the above procedure will wipe everything off your phone, so back up anything you may need first!!
Click to expand...
Click to collapse
You're awesome. However, I did all those steps except for the first step...when I go into recovery mode now, there's still the red lettering as well as when I go into "Tell HTC and error reporting" the red lettering says "This is a test device. Accordingly, to collect critical information about the device, Tell HTC is enabled and cannot be turned off regardless of device settings." Oh, and I'm not able to receive the OTAs.
Now, if I change the MID, do I need to do all the steps again or can I just do the first step now? Will that help get rid of the "test device" warnings that I have on the phone?
Oh, and I used this European one before (cause I have a U and not UL) http://www.htc1guru.com/dld/ruu_m7_..._10-33-1150-01_release_311663_signed_2_4-exe/
Why would I use the UL one?
Thank you again for you time and help!
shpongleeyes said:
You're awesome. However, I did all those steps except for the first step...when I go into recovery mode now, there's still the red lettering as well as when I go into "Tell HTC and error reporting" the red lettering says "This is a test device. Accordingly, to collect critical information about the device, Tell HTC is enabled and cannot be turned off regardless of device settings." Oh, and I'm not able to receive the OTAs.
Now, if I change the MID, do I need to do all the steps again or can I just do the first step now? Will that help get rid of the "test device" warnings that I have on the phone?
Thank you again for you time and help!
Click to expand...
Click to collapse
You won't get any OTAs because of your MID, change it, and see if you start getting the OTAs. M7_U and M7_UL share pretty much most of the software stuff, the hardware is different of course, but MID 0711 and CID HTC__001 won't get any OTAs.
The "Tell HTC and error reporting" red text is because you're S-Off, personally I wouldn't care. But if it bothers you A LOT, you'll need to go S-On again, and AT THIS TIME you should NOT!!! we can deal with that later.
Change MID, and confirm you are now getting OTAs
Again DO NOT GO S-ON, at least for the time being!!
---------- Post added at 07:51 PM ---------- Previous post was at 07:48 PM ----------
shpongleeyes said:
Oh, and I used this European one before (cause I have a U and not UL) http://www.htc1guru.com/dld/ruu_m7_..._10-33-1150-01_release_311663_signed_2_4-exe/
Click to expand...
Click to collapse
Oh I didnt see that one, but it should give you updates till 2.24.401.9 at least. Don't know if 3.62 out yet for that PN.
nkk71 said:
You won't get any OTAs because of your MID, change it, and see if you start getting the OTAs. M7_U and M7_UL share pretty much most of the software stuff, the hardware is different of course, but MID 0711 and CID HTC__001 won't get any OTAs.
The "Tell HTC and error reporting" red text is because you're S-Off, personally I wouldn't care. But if it bothers you A LOT, you'll need to go S-On again, and AT THIS TIME you should NOT!!! we can deal with that later.
Change MID, and confirm you are now getting OTAs
Again DO NOT GO S-ON, at least for the time being!!
---------- Post added at 07:51 PM ---------- Previous post was at 07:48 PM ----------
Oh I didnt see that one, but it should give you updates till 2.24.401.9 at least. Don't know if 3.62 out yet for that PN.
Click to expand...
Click to collapse
Okay, I tried to change the mid but the console is giving me an error:
...
<bootloader> [ERR] Command error !!!
OKAY [ 0.016s]
finished. total time: 0.031s
shpongleeyes said:
Okay, I tried to change the mid but the console is giving me an error:
...
<bootloader> [ERR] Command error !!!
OKAY [ 0.016s]
finished. total time: 0.031s
Click to expand...
Click to collapse
Let's slow it down a little, if I understand correctly:
1- you are now unTAMPERED
2- you are now LOCKED, not RElocked or UNlocked
3- you have CID: HTC__001
4- you have MID: PN0711000
5- you ran the RUU: http://www.htc1guru.com/dld/ruu_m7_..._10-33-1150-01_release_311663_signed_2_4-exe/
6- you are still S-Off (please!)
If all of the above are true, when you go to Settings->About->Software Update (or whatever it's called), does it show an update? or what does it say
EDIT: can you repost a "fastboot getvar all" (remove IMEI and s/n)
nkk71 said:
Let's slow it down a little, if I understand correctly:
1- you are now unTAMPERED
2- you are now LOCKED, not RElocked or UNlocked
3- you have CID: HTC__001
4- you have MID: PN0711000
5- you ran the RUU: http://www.htc1guru.com/dld/ruu_m7_..._10-33-1150-01_release_311663_signed_2_4-exe/
6- you are still S-Off (please!)
If all of the above are true, when you go to Settings->About->Software Update (or whatever it's called), does it show an update? or what does it say
EDIT: can you repost a "fastboot getvar all" (remove IMEI and s/n)
Click to expand...
Click to collapse
you're correct about everything:
All it says is that my software is up-to-date...
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.401.2
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4327mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
shpongleeyes said:
you're correct about everything:
All it says is that my software is up-to-date...
(bootloader) cidnum: HTC__001
Click to expand...
Click to collapse
Before we go on messing with MID, can you just change CID to HTC__J15 (two underscores) and check for a software update, don't know the original 1.xx version, but I am sure that J15 PN0711 got the 2.24.401.2 and (possibly) 2.24.401.9.
Just check if it gives an update with HTC__J15, no need to download it!!
nkk71 said:
Before we go on messing with MID, can you just change CID to HTC__J15 (two underscores) and check for a software update, don't know the original 1.xx version, but I am sure that J15 PN0711 got the 2.24.401.2 and (possibly) 2.24.401.9.
Just check if it gives an update with HTC__J15, no need to download it!!
Click to expand...
Click to collapse
Yes
That gives me an option to upgrade...
now what?
shpongleeyes said:
Yes
That gives me an option to upgrade...
now what?
Click to expand...
Click to collapse
Oh man, sorry to keep you hanging, but we may need to pick this up tomorrow, going for dinner now, wont be back till tomorrow,
but try setting CID to your original one, and see if you get any updates for your original CID.
sorry, got to go, I'll check back on you tomorrow
whatever you decide to do, do NOT GO S-ON (at least for now)
Have a good evening...
nkk71 said:
Oh man, sorry to keep you hanging, but we may need to pick this up tomorrow, going for dinner now, wont be back till tomorrow,
but try setting CID to your original one, and see if you get any updates for your original CID.
sorry, got to go, I'll check back on you tomorrow
whatever you decide to do, do NOT GO S-ON (at least for now)
Have a good evening...
Click to expand...
Click to collapse
When I set it back to my original CID there are no updates...enjoy the food
I look forward to tomorrow!
shpongleeyes said:
When I set it back to my original CID there are no updates...enjoy the food
I look forward to tomorrow!
Click to expand...
Click to collapse
Hey, how are you today?
I'll be online later (around 5 or 6), but it looks like that RUU is fully compatible with ur original CID. So go ahead with your original CID, and get the OTAs. U should be able to get at least to 2.24.401.9, don't know if 3.62 is out for u yet.
Keep s-off in case we need to change something later.
C u later...
Sent from my HTC One using Tapatalk
nkk71 said:
Hey, how are you today?
I'll be online later (around 5 or 6), but it looks like that RUU is fully compatible with ur original CID. So go ahead with your original CID, and get the OTAs. U should be able to get at least to 2.24.401.9, don't know if 3.62 is out for u yet.
Keep s-off in case we need to change something later.
C u later...
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
Hey, no the RUU is not compatible with my original CID (HTC__K18) as there are no available upgrades after I change the CID...also the same is true when I change it to HTC__001, though it did work when you told me to update to J something or other...weird.
shpongleeyes said:
Hey, no the RUU is not compatible with my original CID (HTC__K18) as there are no available upgrades after I change the CID...also the same is true when I change it to HTC__001, though it did work when you told me to update to J something or other...weird.
Click to expand...
Click to collapse
Well I guess you have 2 choices:
1- set CID to HTC__J15 -> a friend of mine has PN0711000 HTC__J15, it's basically the M7_U version and HTC__J15 is a nonbranded WWE edition but usually for the Middle East
2- set CID to HTC__001, set MID to PN0710000, and use this RUU: http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/
by changing to MID PN0710000, it will make the software on your phone think it's a UL model, but since the hardware isn't there for LTE, it won't make any difference.
Step 1, is probably the easiest to do, so why not just set it to J15 and see how far the updates go. (ie if 3.62 is out for J15).
Hope that helps
nkk71 said:
Well I guess you have 2 choices:
1- set CID to HTC__J15 -> a friend of mine has PN0711000 HTC__J15, it's basically the M7_U version and HTC__J15 is a nonbranded WWE edition but usually for the Middle East
2- set CID to HTC__001, set MID to PN0710000, and use this RUU: http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/
by changing to MID PN0710000, it will make the software on your phone think it's a UL model, but since the hardware isn't there for LTE, it won't make any difference.
Step 1, is probably the easiest to do, so why not just set it to J15 and see how far the updates go. (ie if 3.62 is out for J15).
Hope that helps
Click to expand...
Click to collapse
Thank you for you patience and your help! You've been amazing!
shpongleeyes said:
Thank you for you patience and your help! You've been amazing!
Click to expand...
Click to collapse
No problem, glad to be of help. If everything's OK now, could I please ask you to change the main thread title to include [SOLVED]. Thanks & take care

HTC One M7 RUU Europe Search

Hi,
I recently managed to fix my HTC One from a boot loop and accidentally put on an Asia HTC One RUU even though it said it was for Europe. Since then, I've been trying to look for a Europe based one, more specifically the UK and I've had no luck. Could anyone point me in the right direction or provide a fully stock 4.4.3 Rom with sense 6 and full OTA update capability?
Would really appreciate it.
Thanks.
~ 5H1R42 ~
5H1R42 said:
Hi,
I recently managed to fix my HTC One from a boot loop and accidentally put on an Asia HTC One RUU even though it said it was for Europe. Since then, I've been trying to look for a Europe based one, more specifically the UK and I've had no luck. Could anyone point me in the right direction or provide a fully stock 4.4.3 Rom with sense 6 and full OTA update capability?
Would really appreciate it.
Thanks.
~ 5H1R42 ~
Click to expand...
Click to collapse
there is no 4.4.3 ruu, only older versions and will require s-off to be used.
what is your "fastboot getvar all" ?
alray said:
there is no 4.4.3 ruu, only older versions and will require s-off to be used.
What is your "fastboot getvar all" ?
Click to expand...
Click to collapse
mid: Pn0710000
cid: Vodap001
5H1R42 said:
mid: Pn0710000
cid: Vodap001
Click to expand...
Click to collapse
what is your "fastboot getvar all" ?
alray said:
there is no 4.4.3 ruu, only older versions and will require s-off to be used.
what is your "fastboot getvar all" ?
Click to expand...
Click to collapse
alray said:
what is your "fastboot getvar all" ?
Click to expand...
Click to collapse
INFOversion: 0.5
INFOversion-bootloader: 1.57.0000
INFOversion-baseband: 4T.28.3218.04
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 6.12.161.8
INFOversion-misc: PVT SHIP S-ON
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0710000
INFOcidnum: VODAP001
INFObattery-status: good
INFObattery-voltage: 4091mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-6d8a0b9b
INFOhbootpreupdate: 11
INFOgencheckpt: 0
5H1R42 said:
I recently managed to fix my HTC One from a boot loop and accidentally put on an Asia HTC One RUU even though it said it was for Europe.
Click to expand...
Click to collapse
5H1R42 said:
INFOversion: 0.5
INFOversion-bootloader: 1.57.0000
INFOversion-baseband: 4T.28.3218.04
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 6.12.161.8
INFOversion-misc: PVT SHIP S-ON
remove
remove
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0710000
INFOcidnum: VODAP001
INFObattery-status: good
INFObattery-voltage: 4091mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-6d8a0b9b
INFOhbootpreupdate: 11
INFOgencheckpt: 0
Click to expand...
Click to collapse
I don't understand, you said that you have flashed an Asian RUU but according to your getvar, everything is 100% stock Vodaphone version. Your phone is s-on which prevent to flash the wrong RUU and there is no RUU for that version which make me beleive what you said at post #1 is incorrect.
However if you want to convert it to an european version like the x.xx.401.x version and receive ota updates, you'll need s-off
or you can use custom roms.
btw edit your above post and remove your imei and serialno
O no, I reverted to a custom Rom because the Asian one wouldn't accept ota updates
alray said:
I don't understand, you said that you have flashed an Asian RUU but according to your getvar, everything is 100% stock Vodaphone version. Your phone is s-on which prevent to flash the wrong RUU and there is no RUU for that version which make me beleive what you said at post #1 is incorrect.
However if you want to convert it to an european version like the x.xx.401.x version and receive ota updates, you'll need s-off
or you can use custom roms.
btw edit your above post and remove your imei and serialno
Click to expand...
Click to collapse
I reverted back to a rooted stock rom but i don't really like it. Ive checked the rom that you've linked in your signature and was wondering if that would work on my device in order to restore OTA updates however, I can't get S-OFF due to a certain firmware update
5H1R42 said:
O no, I reverted to a custom Rom because the Asian one wouldn't accept ota updates
Click to expand...
Click to collapse
if you want ota updates you must use the 6.12.161.8 version like in your getvar, otherwise you'll need s-off to convert to another version or keep using custom roms.
Btw 6.12.161.8 is the latest vodaphone version
---------- Post added at 06:34 PM ---------- Previous post was at 06:32 PM ----------
5H1R42 said:
I can't get S-OFF due to a certain firmware update
Click to expand...
Click to collapse
Tried sunshine?
alray said:
if you want ota updates you must use the 6.12.161.8 version like in your getvar, otherwise you'll need s-off to convert to another version or keep using custom roms.
Btw 6.12.161.8 is the latest vodaphone version
---------- Post added at 06:34 PM ---------- Previous post was at 06:32 PM ----------
Tried sunshine?
Click to expand...
Click to collapse
So if i flash a vodafone version back on to my phone, i should have OTA updates back? The thing is, i don't want the vodafone bloatware so i'm looking for a stock version with no bloatware so, if I flashed a vodafone RUU and then flahsed your version, would I be ok and have what I want?
5H1R42 said:
So if i flash a vodafone version back on to my phone, i should have OTA updates back? The thing is, i don't want the vodafone bloatware so i'm looking for a stock version with no bloatware so, if I flashed a vodafone RUU and then flahsed your version, would I be ok and have what I want?
Click to expand...
Click to collapse
Your phone CID and MID is vodafone so you can only receive ota updates for vodafone plus your rom must be on the same version as listed on your fastboot getvar all, otherwise you will not be able to install ota updates (firmware and software mismatch).
If you want to debloat your rom by installing another version (like the dev edition or the european version) and receive ota updates, you will need s-off to do a full conversion which include to change your CID, MID and flashing a RUU.
Or you can use latest custom rom versions.
alray said:
I don't understand, you said that you have flashed an Asian RUU but according to your getvar, everything is 100% stock Vodaphone version. Your phone is s-on which prevent to flash the wrong RUU and there is no RUU for that version which make me beleive what you said at post #1 is incorrect.
However if you want to convert it to an european version like the x.xx.401.x version and receive ota updates, you'll need s-off
or you can use custom roms.
btw edit your above post and remove your imei and serialno
Click to expand...
Click to collapse
alray said:
Your phone CID and MID is vodafone so you can only receive ota updates for vodafone plus your rom must be on the same version as listed on your fastboot getvar all, otherwise you will not be able to install ota updates (firmware and software mismatch).
If you want to debloat your rom by installing another version (like the dev edition or the european version) and receive ota updates, you will need s-off to do a full conversion which include to change your CID, MID and flashing a RUU.
Or you can use latest custom rom versions.
Click to expand...
Click to collapse
Ok. So how would I force s-off then? If I can get the done, I'll install the dev edition one you've got linked in your signature and I'm good to go.
5H1R42 said:
Ok. So how would I force s-off then? If I can get the done, I'll install the dev edition one you've got linked in your signature and I'm good to go.
Click to expand...
Click to collapse
You can achieve s-off using sunshine. The rom linked in my signature is not a RUU and you will not receive ota update because your firmware will not match the software version. Use a RUU and change your cid and mid so they match the RUU version
alray said:
You can achieve s-off using sunshine. The rom linked in my signature is not a RUU and you will not receive ota update because your firmware will not match the software version. Use a RUU and change your cid and mid so they match the RUU version
Click to expand...
Click to collapse
In that case, I may well install the Vodafone ruu and be back at square one. I'll just have to disable all the Vodafone bloatware through the app manager.
alray said:
You can achieve s-off using sunshine. The rom linked in my signature is not a RUU and you will not receive ota update because your firmware will not match the software version. Use a RUU and change your cid and mid so they match the RUU version
Click to expand...
Click to collapse
Sorry to be a pain but I've got a 6.12.161.8 firmware zip file from the HTC dev site. If I was to install this on to my HTC one, would I be able to go back to stock android?

How return stock and get ota update?

I have s-on, unlocked, with twrp recovery
hboot 1.57
cid Htc_032
other info of hboot:
-------------------------------------------------
version: 0.5
bootloader version: 1.57.0000
baseband version: 4t.27.3218.14
version misc: PVT SHIP S-ON
product: m7_ul
flatform: hboot-8064
modelid: PN0710000
cidnum: HTC_032
oartition layout: generic
security: on
build mode: ship
boot mode: fastboot
commitno-bootloader: dirty-e47fb74b
hboot pre update: 11
gencheckpt: 0
________________________________
need files to return stock enought to get lollipop update and update firmware
who can help me?
Version main ?
Software version ?
On basis of CID no I suggest
http://www.htc1guru.com/dld/ruu_m7_...0-38r-1157-04l_release_353069_signed_2-1-exe/
But if you have higher no software version you need higher RUU
There are dump files available @ XDA search them
You need x.xx.401.x version
yatindroid said:
Version main ?
Software version ?
On basis of CID no I suggest
http://www.htc1guru.com/dld/ruu_m7_...0-38r-1157-04l_release_353069_signed_2-1-exe/
But if you have higher no software version you need higher RUU
There are dump files available @ XDA search them
You need x.xx.401.x version
Click to expand...
Click to collapse
hboot 1.57 so he is either on a 5.xx.401.xx or 6.xx.401.xx version, the ruu will not work, 4.xx.xxx.x ruu are for hboot 1.56
he will indeed need to provide his firmware/software version. There is like 4 versions of .401 on hboot 1.57...
alray said:
hboot 1.57 so he is either on a 5.xx.401.xx or 6.xx.401.xx version, the ruu will not work, 4.xx.xxx.x ruu are for hboot 1.56
he will indeed need to proved his firmware/software version. There is like 4 versions of .401 on hboot 1.57...
Click to expand...
Click to collapse
what adb input for see it?
EDIT:
bootloader say may 5 2014 23:16:29
os section is empty, i have maximus hd 50.0 yet
and version main is emty too
HoloSync said:
what adb input for see it?
EDIT:
bootloader say may 5 2014 23:16:29
os section is empty, i have maximus hd 50.0 yet
and version main is emty too
Click to expand...
Click to collapse
That time 4.4.2 sense 6 out
5.xx.401.x series
yatindroid said:
That time 4.4.2 sense 6 out
5.xx.401.x series
Click to expand...
Click to collapse
what is better i flash?
i would do upgrade to new 7.xx.xxx.xx firmware and radio with ota
HoloSync said:
what is better i flash?
i would do upgrade to new 7.xx.xxx.xx firmware and radio with ota
Click to expand...
Click to collapse
to use ota update, your firmware version and rom version must match. We can't tell you what rom you need exactly because you can't tell us what is you firmware version. Your version number is erased from your getvar (because of twrp recovery) so if you don't remember what rom version you were on before flashing your custom rom, then I don't have any idea of which one you need.
better to go s-off and flash a full RUU.
alray said:
to use ota update, your firmware version and rom version must match. We can't tell you what rom you need exactly because you can't tell us what is you firmware version. Your version number is erased from your getvar (because of twrp recovery) so if you don't remember what rom version you were on before flashing your custom rom, then I don't have any idea of which one you need.
better to go s-off and flash a full RUU.
Click to expand...
Click to collapse
how go s off with 1.57 and 5.xx.401.x?
i tryed firewater + cyanogen + unsecure kernel, but not work, any idea?
HoloSync said:
how go s off with 1.57 and 5.xx.401.x?
i tryed firewater + cyanogen + unsecure kernel, but not work, any idea?
Click to expand...
Click to collapse
any search for s-off + hboot 1.57 would have given you the answer
SunShine S-Off
http://theroot.ninja/

Can't find RUU

hey xda,
trying to restore my M7 to stock for a warranty repair, but the link to download the Bell nandroid backup of the phone is down. it was HTC1guru but apparently it went down and came back as androidRUU, however all the backups are there except the one I need (but of course, right?). Could anyone please point me to the file I need? Nandroid or RUU is fine.
bbmaster123 said:
hey xda,
trying to restore my M7 to stock for a warranty repair, but the link to download the Bell nandroid backup of the phone is down. it was HTC1guru but apparently it went down and came back as androidRUU, however all the backups are there except the one I need (but of course, right?). Could anyone please point me to the file I need? Nandroid or RUU is fine.
Click to expand...
Click to collapse
We can't help you find the file you need if we don't know your phone details. Post the output of "fastboot getvar all" (remove imei and serialno before posting)
alray said:
We can't help you find the file you need if we don't know your phone details. Post the output of "fastboot getvar all" (remove imei and serialno before posting)
Click to expand...
Click to collapse
I didn't think the rest of the details mattered, but since you asked, here are the details. Original CID was BM__001 before I changed it to superCID
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.60.0000
(bootloader) version-baseband: 4T.33.3218.
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.15.401.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3966mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-91
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.047s
bbmaster123 said:
I didn't think the rest of the details mattered, but since you asked, here are the details. Original CID was BM__001 before I changed it to superCID
(bootloader) version-bootloader: 1.60.0000
(bootloader) version-main: 7.15.401.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) product: m7_ul
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111
(bootloader) security: off
Click to expand...
Click to collapse
There is no RUU for Bell (x.xx.666.x), Only a 3.23.666.1 nandroid backup is available which is useless in your situation. After restoring that nandroid backup, your firmware will still be that leaked 7.15.401.1 version and will not match the 3.23.666.1 software version which will void the warranty. You'll also need to set your bootloader back to "LOCKED" and remove your "TAMPERED" flag which should be done on hboot 1.44 or 1.54 like explained in nkk71's guide.
alray said:
There is no RUU for Bell (x.xx.666.x), Only a 3.23.666.1 nandroid backup is available which is useless in your situation. After restoring that nandroid backup, your firmware will still be that leaked 7.15.401.1 version and will not match the 3.23.666.1 software version which will void the warranty. You'll also need to set your bootloader back to "LOCKED" and remove your "TAMPERED" flag which should be done on hboot 1.44 or 1.54 like explained in nkk71's guide.
Click to expand...
Click to collapse
thats fine, I can reflash my firmware. I know how to do all of this, I just need the file, but as I said, since the htc1guru server is down, I can't find it.
bbmaster123 said:
thats fine, I can reflash my firmware. I know how to do all of this, I just need the file, but as I said, since the htc1guru server is down, I can't find it.
Click to expand...
Click to collapse
But there is no 3.23.666.1 firmware uploaded anywhere, only a Nandroid backup (which does NOT include the firmware, only the software) so how will you reflash the stock 3.23.666.1 firmware over you 7.15.401.1 firmware?
For the nandroid backup, you'll have to wait for htc1guru.com to be back online.
alray said:
But there is no 3.23.666.1 firmware uploaded anywhere, only a Nandroid backup (which does NOT include the firmware, only the software) so how will you reflash the stock 3.23.666.1 firmware over you 7.15.401.1 firmware?
For the nandroid backup, you'll have to wait for htc1guru.com to be back online.
Click to expand...
Click to collapse
huh, I think I found a TWRP backup of the stock OS. Downloading now. Will check if it includes the firmware. its strange, it din't show up in a google search of of the ruu, but came up when I searched for 3.23.666.1. I will post the link if its the right file
bbmaster123 said:
huh, I think I found a TWRP backup of the stock OS. Downloading now. Will check if it includes the firmware. its strange, it din't show up in a google search of of the ruu, but came up when I searched for 3.23.666.1. I will post the link if its the right file
Click to expand...
Click to collapse
TWRP backups never includes the firmware. Only include /data partition (user data), /system partition (software aka Operating System) and /boot partition (kernel).
alray said:
TWRP backups never includes the firmware. Only include /data partition (user data), /system partition (software aka Operating System) and /boot partition (kernel).
Click to expand...
Click to collapse
yea, your right. now the hunt has changed from nandroid backup to firmware. I will scour and report my findings.
bbmaster123 said:
yea, your right. now the hunt has changed from nandroid backup to firmware. I will scour and report my findings.
Click to expand...
Click to collapse
so you'll need to find at least a firmware.zip and a nandroid backup of the same version, restoring the backup using the appropriate recovery and flashing the firmware.zip with fastboot with the phone booted in ruu mode. Don't ever think about using a firmware.zip from an ota update or you will brick your phone. Good luck.
alray said:
so you'll need to find at least a firmware.zip and a nandroid backup of the same version, restoring the backup using the appropriate recovery and flashing the firmware.zip with fastboot with the phone booted in ruu mode. Don't ever think about using a firmware.zip from an ota update or you will brick your phone. Good luck.
Click to expand...
Click to collapse
I believe I found it, but I want to be sure. Why would an OTA version of the firmware brick the phone? heres the link for the file I found
http://xda7.androidrevolution.org/db_mirror/Firmware/HTC/HTC_One/666/3.23.666.1.zip
bbmaster123 said:
I believe I found it, but I want to be sure. Why would an OTA version of the firmware brick the phone? heres the link for the file I found
http://xda7.androidrevolution.org/db_mirror/Firmware/HTC/HTC_One/666/3.23.666.1.zip
Click to expand...
Click to collapse
Im not sure if that is OTA or Full firmware, im not too upto speed with firmware packages, but to answer your question, OTA firmware just upgrades the original firmware on your device, so its not a complete firmware package (which is what you need), and as you dont have the original firmware, it would just brick.
Could you not get away with using dev edition RUU and sending it back like that, dev edition devices come s-off and unlocked, the tampered flag is easy to remove, if they question it, deny any knowlege.
Seanie280672 said:
Im not sure if that is OTA or Full firmware, im not too upto speed with firmware packages, but to answer your question, OTA firmware just upgrades the original firmware on your device, so its not a complete firmware package (which is what you need), and as you dont have the original firmware, it would just brick.
Could you not get away with using dev edition RUU and sending it back like that, dev edition devices come s-off and unlocked, the tampered flag is easy to remove, if they question it, deny any knowlege.
Click to expand...
Click to collapse
thats a good idea, but I got impatient and just flashed everything. turns out it works fine. now ill just run the stock ota updates from the settings menu and s-on and lock the bootloader. I should probably make a new thread with instructions to return to stock bell and host post the nandroid and firmware. thanks for your help! now that I'm thinking about it, I should go back to all my previous threads and hit the thanks button for everyone who helped me!
bbmaster123 said:
thats a good idea, but I got impatient and just flashed everything. turns out it works fine. now ill just run the stock ota updates from the settings menu and s-on and lock the bootloader. I should probably make a new thread with instructions to return to stock bell and host post the nandroid and firmware. thanks for your help! now that I'm thinking about it, I should go back to all my previous threads and hit the thanks button for everyone who helped me!
Click to expand...
Click to collapse
you need to go locked and s-on before the OTA's, if you go s-on after HBOOT 1.54 the tampered flag will come back and you'll have to get s-off again and start all over.
Have a look at post 2 by @alray he has a link in his signature by nkk71 of how to return to 100% stock which contains all the instructions
Seanie280672 said:
Could you not get away with using dev edition RUU and sending it back like that, dev edition devices come s-off and unlocked, the tampered flag is easy to remove, if they question it, deny any knowlege.
Click to expand...
Click to collapse
Afaik they come unlocked but not s-off. Anyway converting it to full dev edition might be the best solution at this point. Customer support often repair modded phones depending what is broken. For the purple camera for example, some users got their phone repaired under warranty even if the phone was not stock.
bbmaster123 said:
thats a good idea, but I got impatient and just flashed everything. turns out it works fine. now ill just run the stock ota updates from the settings menu and s-on and lock the bootloader.
Click to expand...
Click to collapse
You can't !
Your firmware is 7.15.401.1, To use ota update firmware must match the software version. The ota need to patch the 3.23.666.1 firmware not the 7.15.401.1 firmware.
unless you have flashed the 3.23.666.1 firmware then you should be fine. You must make sure that firmware file is the FULL firmware and not a firmware extracted from an ota update before flashing.
alray said:
Afaik they come unlocked but not s-off. Anyway converting it to full dev edition might be the best solution at this point. Customer support often repair modded phones depending what is broken. For the purple camera for example, some users got their phone repaired under warranty even if the phone was not stock.
You can't !
Your firmware is 7.15.401.1, To use ota update firmware must match the software version. The ota need to patch the 3.23.666.1 firmware not the 7.15.401.1 firmware.
unless you have flashed the 3.23.666.1 firmware then you should be fine. You must make sure that firmware file is the FULL firmware and not a firmware extracted from an ota update before flashing.
Click to expand...
Click to collapse
I already flashed the 3.23.666.1 firmware, and it worked. I already went through the first round of the update process, now its downloading the OTA for kitkat. still s-off right now. bootloader is still unlocked too.
bbmaster123 said:
I already flashed the 3.23.666.1 firmware, and it worked. I already went through the first round of the update process, now its downloading the OTA for kitkat. still s-off right now. bootloader is still unlocked too.
Click to expand...
Click to collapse
I'm looking forward to your post with all the links and instructions ... good job

Can't find a stock ROM for HTC One m7 801s

Could you, please, help me to find stock ROM for One 801s, MID PN0714000, firmware 6.xx.xxx.x
Rooted, S-ON, Bootloader Unlocked
suchauser said:
Could you, please, help me to find stock ROM for One 801s, MID PN0714000, firmware 6.xx.xxx.x
Rooted, S-ON, Bootloader Unlocked
Click to expand...
Click to collapse
firmware version ? CID ?
CID HTC_621
Kit Kat firmware, I can't get this information now, my phone is quite far away) just need a stock ROMs for my model
suchauser said:
CID HTC_621
Kit Kat firmware, I can't get this information now, my phone is quite far away) just need a stock ROMs for my model
Click to expand...
Click to collapse
I am looking for the same thing too, I believe you are looking for 6.09.401.5 was the main firmware that 4.4.3 roms used although they are up to 6.09.401.12 now.
I can't find a RUU for this firmware anywhere though.
yatindroid said:
firmware version ? CID ?
Click to expand...
Click to collapse
CID: HTC_621
Firmware: 6.09.709.7
Hboot 1.57
TAMPERED
UNLOCKED
suchauser said:
CID: HTC_621
Firmware: 6.09.709.7
Hboot 1.57
TAMPERED
UNLOCKED
Click to expand...
Click to collapse
I can find for you just this http://www.htc1guru.com/dld/guru_reset_m7_2-24-709-1-zip/
Flash it update it
yatindroid said:
I can find for you just this http://www.htc1guru.com/dld/guru_reset_m7_2-24-709-1-zip/
Flash it update it
Click to expand...
Click to collapse
Thanks, but it's MID PN0711000 and mine is PN0714000 will it be a problem?
suchauser said:
Thanks, but it's MID PN0711000 and mine is PN0714000 will it be a problem?
Click to expand...
Click to collapse
I can't say why it's different maybe htc1guru post it wrong other things match
If you get ota and flash it without problems only that will confirm

Categories

Resources