Related
Hello,
Please help me get any OS back to my XT1053 for now. Here's what happened:
1) I unlocked the bootloader, rooted my XT1053, stock recovery. Then last week I tried updating it to 5.1 official version via OTA. It failed due to files mismatch (maybe due to using apps that need root like Adaway). So I downloaded 4.4.4 STOCK version from Moto website, flashed boot.img, system.img and followed all the steps given here: https://motorola-global-portal.custhelp.com/app/standalone/bootloader/recovery-images
Once the phone booted properly into 4.4.4, I tried 5.1 OTA and it worked fine. Then I flashed TWRP and SU to get root (I lost root when I flashed STOCK 4.4.4).
2) Everything was fine except that whenever I rebooted, my phone would Optimize ALL the apps. I Googled a lot and apparently this happened to many folks and there was no solution.
3) Today, I thought I will try and fix it by sideloading the 5.1 OTA zip (I thought the regular OTA style installation that I did of 5.1 over mfastboot style installation of 4.4.4 had something to do with it. I know, this was stupid of me!)
4) So, today I went to TWRP and tried to flash 'Blur_Version.213.44.1.ghost_row.Retail.en.US.zip'. I am 100% certain that this was the file that I copied from /cache after OTA had downloaded the file last week and I had saved it locally on PC and in SD on phone. However, this flashing gave me an error saying that it expected either 4.4.4 KXA or 5.1 but that my system was 4.4?? So the flashing failed and my OS is gone. How can I get ANY OS back? Here are the things that I tried so far:
1) Installed RSD Lite and I am downloading XT1053_TMO_RETAIL-US_4.4.4_KXA21.12-L1.29.1_2_cid9_CFC_1FF.xml.zip file from http://www.filefactory.com/folder/dd05c058d3ff8dbe/?sort=created&order=DESC&show=100&page=1 as I type this out now. HOWEVER, I think I shouldn't use it as I read KidJoe saying not to downgrade. (KidJoe's comments are here http://forum.xda-developers.com/moto-x/general/info-tip-web-sites-official-leaked-roms-t2923347)
2) THEREFORE, I was wondering if I could simply flash a higher or equivalent version of ROM. Since we don't have an official 5.1 flashable zip right now, can I use 5.1.1 by CM? It's present here: http://primehowto.com/install-andro...le-moto-x-xt1053-2013-via-cm12-1-nightly-rom/
3) If yes to point# 2 above, I have a small problem. My phone is not detected by 'adb devices; in TWRP recovery mode. My battery is 11%. Could that be the issue?
I KNOW THIS WAS A LONG POST. I JUST WANTED TO GIVE ALL THE INFO. PLEASE HELP ME GET ANY OS ONTO THE PHONE AND THEN I WILL WAIT FOR THE 5.1 SBF TO BE AVAILABLE. THANKS A LOT IN ADVANCE....
here [Official] XT1058_GHOST_RETBR_5.1 FXZ/SBF (Full Rom)uploaded by our fellow user GARUXA
https://doc-10-ak-docs.googleuserco...359/*/0BwcadIv25aK8Tng3SUk2b1k5aVE?e=download
http://forum.xda-developers.com/mot...t1058ghostretbr5-1-fxz-sbf-rom-t3144161/page2
hbenz2008 said:
here [Official] XT1058_GHOST_RETBR_5.1 FXZ/SBF (Full Rom)uploaded by our fellow user GARUXA
https://doc-10-ak-docs.googleuserco...359/*/0BwcadIv25aK8Tng3SUk2b1k5aVE?e=download
http://forum.xda-developers.com/mot...t1058ghostretbr5-1-fxz-sbf-rom-t3144161/page2
Click to expand...
Click to collapse
Thanks for quick response. But I have XT1053.. Can I still use the one that you gave?
Not recommended, hold on a bit. try to flash only gpt and mboot from your 5.1 update?
hbenz2008 said:
Not recommended, hold on a bit. Did try to flash only gpt and mboot from your 5.1 update?
Click to expand...
Click to collapse
No, I didn't try mfastboot of 'gpt' from 5.1 update file 'Blur_Version.213.44.1.ghost_row.Retail.en.US.zip'. I don't see an 'mboot' or 'boot' file in it though. I do see 'gpt'. Also, in fastboot mode it says "Charger connected" instead of "USB connected". I think that's due to the low battery too?
hbenz2008 said:
Not recommended, hold on a bit. try to flash only gpt and mboot from your 5.1 update?
Click to expand...
Click to collapse
Would you know if 'Blur_Version.213.44.1.ghost_row.Retail.en.US.zip' file is the OTA 5.1 file? I think that's how the naming convention goes i.e. the name is set to the system version on which it is going to be updated NOT the system version that it will be updated to. I don't know why this flash failed though. I can give you the exact error that I get when I try flashing this if that helps? Thanks!
Shoot the error. If it's security downgrade, again flash gpt and mboot from Ota 5.1.
I will have to verify the name of Ota as its critical info.
hbenz2008 said:
Not recommended, hold on a bit. try to flash only gpt and mboot from your 5.1 update?
Click to expand...
Click to collapse
When I tried flashing "Blur_Version.213.44.1.ghost_row.Retail.en.US.zip" file (which I still think is the OTA 5.1 zip), I get this error:
Package expects build fingerprint of mototola/ghost_retail/ghost:4.4.4/KXA21.12-L1.29.1/2:user/release-keys or motorola/ghost_retail/ghost:5.1/LPA23.12-15/15:user/release-keys; this device has motorola/ghost_retail/ghost:4.4/13.11.1Q2.X-69-3/51:user/release-keys
This is where I got burned today. The above error wiped out my OS. I was on 5.1, I don't know why it says I have 4.4....
Prolly system mismatch, try only gpt and mboot. What error do u get?
---------- Post added at 09:27 PM ---------- Previous post was at 09:17 PM ----------
BTW your post provided good info. So Ota think u on 4.4.
You flashed only syst and boot to get on 4.4 ,could be where the prob is.
Need to know where img/rom info reside.
Double check the 4.4 files you flashed.
Just thinking out loud..
hbenz2008 said:
Prolly system mismatch, try only gpt and mboot. What error do u get?
---------- Post added at 09:27 PM ---------- Previous post was at 09:17 PM ----------
BTW your post provided good info. So Ota think u on 4.4.
You flashed only syst and boot to get on 4.4 ,could be where the prob is.
Need to know where img/rom info reside.
Double check the 4.4 files you flashed.
Just thinking out loud..
Click to expand...
Click to collapse
What's 'mboot'. There's no such file in the extracted folder of 'blur.....' file that I mentioned earlier. there is 'gpt'. My phone is detected via fastboot now so I can flash but don't know where the 'mboot' is
Hitdroid said:
What's 'mboot'. There's no such file in the extracted folder of 'blur.....' file that I mentioned earlier. there is 'gpt'. My phone is detected via fastboot now so I can flash but don't know where the 'mboot' is
Click to expand...
Click to collapse
Okay, so I fixed it. At least got an OS for now .. This is what I did.. I took a chance and went ahead with these steps:
1) Extracted files from Stock TMO 4.4.4 file 'TMO_RETAIL_XT1053_4.4.4_213.44.1.ghost_row.Retail.en.US_MR4_CFC.tgz' got from Moto website.
2) Modified 'flash.bat' file to have below commands:
SET mfastboot=mfastboot.exe
%mfastboot% getvar max-download-size
%mfastboot% oem fb_mode_set
%mfastboot% flash partition gpt.bin
%mfastboot% flash motoboot motoboot.img
%mfastboot% reboot-bootloader
%mfastboot% flash logo logo.bin
%mfastboot% flash boot boot.img
%mfastboot% flash recovery recovery.img
%mfastboot% flash system system.img
%mfastboot% flash modem NON-HLOS.bin
%mfastboot% erase modemst1
%mfastboot% erase modemst2
%mfastboot% flash fsg fsg.mbn
%mfastboot% erase cache
%mfastboot% reboot
3) It failed with 'partition', 'motoboot', 'logo'. Everything else was successful.
4) My phone booted into 4.4.4 now.
It's funny but I think I have successfully downgraded from 5.1 to 4.4.4... That means, my main system file was never upgraded to 5.1?? It's late and I want a phone for tomorrow so I won't try 5.1 tonight. But it would be great if experts could pitch in. How did I downgrade from 5.1 to 4.4.4?
Anyway, thanks for your help. Your comment about 'gpt' made me think "maybe my phone won't hard brick if I install 4.4.4 again".. and it didn't!
CHEERS!
You can downgrade Fri 5.1 to 4.4 without flashing gpt and mboot. Wait for full 5.1.
Excellent man. Check your bootloader version, it's probably lollipop. So don't take update yet.
I thought we couldn't downgrade without bricking? Anyway, I am getting notification to update to 5.1 via OTA. I'm ignoring until I understand what's happening. So, pls tell me what are the things that I need to check the versions of? Attached is a screenshot from 'About Phone'. How do I check bootloader version? Thanks man..
Sent from my XT1053 using XDA Free mobile app
to check bootloader BL, restart phone in fastboot read menu.
KidJoe got this better covered here
http://forum.xda-developers.com/moto-x/general/info-warning-risks-downgrading-impacts-t3058202
Hitdroid said:
I thought we couldn't downgrade without bricking? Anyway, I am getting notification to update to 5.1 via OTA. I'm ignoring until I understand what's happening. So, pls tell me what are the things that I need to check the versions of? Attached is a screenshot from 'About Phone'. How do I check bootloader version? Thanks man..
Sent from my XT1053 using XDA Free mobile app
Click to expand...
Click to collapse
Hitdroid said:
I thought we couldn't downgrade without bricking? Anyway, I am getting notification to update to 5.1 via OTA. I'm ignoring until I understand what's happening. So, pls tell me what are the things that I need to check the versions of? Attached is a screenshot from 'About Phone'. How do I check bootloader version? Thanks man..
Sent from my XT1053 using XDA Free mobile app
Click to expand...
Click to collapse
Many try to skip GPT.BIN and MOTOBOOT.IMG... but when you have a version missmatch (gpt/motoboot from one rom, and rest from another), you increase your chance of bricking should you apply an OTA update zip in the future. And you'll likely end up with features not working or extra "bugs" that wouldn't otherwise appear.
For those who say "its safe to downgrade"... I'll point you to -> http://forum.xda-developers.com/moto-x/general/info-warning-risks-downgrading-impacts-t3058202 and ask you to view the 7 links near the end of the first post as just a few examples.
Hey KidJoe, I could really use your help. I didn't want to downgrade but I had no choice as I couldn't re-install 5.1 (hence created this thread). It's good that I didn't brick when I reverted to 4.4.4 from 5.1 but I am skeptical of taking the 5.1 OTA now.
Pls look at the screen shot that I attached in my previous post. Also, my BL version is 30.BE (sha-34b7ccb, 2015-04-22 12:57:17). I have Stock Recovery KXA21.12-L1.29.1
How can I get a perfect installation of 5.1.. By perfect I mean none of the files left behind in the old version.
Appreciate your help!
Sent from my XT1053 using XDA Free mobile app
Hitdroid said:
Hey KidJoe, I could really use your help. I didn't want to downgrade but I had no choice as I couldn't re-install 5.1 (hence created this thread). It's good that I didn't brick when I reverted to 4.4.4 from 5.1 but I am skeptical of taking the 5.1 OTA now.
Pls look at the screen shot that I attached in my previous post. Also, my BL version is 30.BE (sha-34b7ccb, 2015-04-22 12:57:17). I have Stock Recovery KXA21.12-L1.29.1
How can I get a perfect installation of 5.1.. By perfect I mean none of the files left behind in the old version.
Appreciate your help!
Sent from my XT1053 using XDA Free mobile app
Click to expand...
Click to collapse
Hitdroid, do you mind sharing your 5.1 OTA file for xt1053.
I'm in the same situation as you. Got 5.1 OTA a few weeks ago, rooted it and installed TWRP. Then I accidentally installed my 4.4.4 backup which erased my 5.1 install.
I just installed CM 5.1 as a stopgap but i'd like to return to near stock so i'm following this thread.
as I thought, you have a 5.1 BL.
Gotta flash manually when sbf/ROM is available
Hitdroid said:
Hey KidJoe, I could really use your help. I didn't want to downgrade but I had no choice as I couldn't re-install 5.1 (hence created this thread). It's good that I didn't brick when I reverted to 4.4.4 from 5.1 but I am skeptical of taking the 5.1 OTA now.
Pls look at the screen shot that I attached in my previous post. Also, my BL version is 30.BE (sha-34b7ccb, 2015-04-22 12:57:17). I have Stock Recovery KXA21.12-L1.29.1
How can I get a perfect installation of 5.1.. By perfect I mean none of the files left behind in the old version.
Appreciate your help!
Sent from my XT1053 using XDA Free mobile app
Click to expand...
Click to collapse
Because of your bootloader, the safest way is wait for the 5.1 SBF to be posted (since you have an XT1053, it will be posted on Moto's web site, and you don't have to rely on leaks)... But I have no idea how long that will take.
Now, you could try to take the OTA, but I've seen enough bricks to say.. If it was my phone... I'd wait.
I'm at work so will share the file once I go home. But I think we should wait for 5.1 SBF as @KidJoe and @hbenz2008 have stated.
Sent from my XT1053 using XDA Free mobile app
I found a few tutorials for other motorola devices (Moto G, Moto X 1st gen) that say to make sure you use mfastboot when flashing the factory images. Motorola's own factory image website doesn't seem to say anything about that. I want to flash back to stock for now. I have fastboot configured through the android SDK. Do I need to track down this mfastboot application? And is there any official place to get it? When I search for it all I find are non-motorola sites that are hosting it and I 'd rather download it from the source.
raptir said:
I found a few tutorials for other motorola devices (Moto G, Moto X 1st gen) that say to make sure you use mfastboot when flashing the factory images. Motorola's own factory image website doesn't seem to say anything about that. I want to flash back to stock for now. I have fastboot configured through the android SDK. Do I need to track down this mfastboot application? And is there any official place to get it? When I search for it all I find are non-motorola sites that are hosting it and I 'd rather download it from the source.
Click to expand...
Click to collapse
There is no official site to download it from.
Sent from my XT1095
raptir said:
I found a few tutorials for other motorola devices (Moto G, Moto X 1st gen) that say to make sure you use mfastboot when flashing the factory images. Motorola's own factory image website doesn't seem to say anything about that. I want to flash back to stock for now. I have fastboot configured through the android SDK. Do I need to track down this mfastboot application? And is there any official place to get it? When I search for it all I find are non-motorola sites that are hosting it and I 'd rather download it from the source.
Click to expand...
Click to collapse
I always just use fastboot. Never had a problem flashing factory images.
Sent from my XT1095 using Tapatalk
dustin_b said:
I always just use fastboot. Never had a problem flashing factory images.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Mfasteboot is only necessary if you want to flash a full system.img. If you flash a sparsed system image then normal fastboot works fine.
Sent from my XT1095
AGISCI said:
Mfasteboot is only necessary if you want to flash a full system.img. If you flash a sparsed system image then normal fastboot works fine.
Sent from my XT1095
Click to expand...
Click to collapse
I have used fastboot to flash the full system.img. I know people say it doesn't work but in my experience, it breaks it down into sparse chunks and flashes it.
Sent from my XT1095 using Tapatalk
dustin_b said:
I have used fastboot to flash the full system.img. I know people say it doesn't work but in my experience, it breaks it down into sparse chunks and flashes it.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
That depends on the version of fastboot installed on the computer. If it's an older version, it won't break it down into sparse chunks. It will fail on older versions.
Sent from my XT1095
AGISCI said:
That depends on the version of fastboot installed on the computer. If it's an older version, it won't break it down into sparse chunks. It will fail on older versions.
Sent from my XT1095
Click to expand...
Click to collapse
Yeah, that makes sense cause I have the newer versions on my laptops. I only started using fastboot when I got my Moto X so I don't know a lot about it. Just enough to get me by and get me out of trouble.
Sent from my XT1095 using Tapatalk
Thanks for the clarification. I actually realized now that the fastboot.exe is included in the factory image so I would assume that is the Motorola version.
I'm currently running CM12.1 that I flashed over a stock 5.0 install. I should be safe to flash everything in the factory image, since I'm not downgrading, correct?
raptir said:
Thanks for the clarification. I actually realized now that the fastboot.exe is included in the factory image so I would assume that is the Motorola version.
I'm currently running CM12.1 that I flashed over a stock 5.0 install. I should be safe to flash everything in the factory image, since I'm not downgrading, correct?
Click to expand...
Click to collapse
You shouldn't have any problems.
Sent from my XT1095 using Tapatalk
When you download the factory image motorola includes its own fastboot. The difference is that Motorola's fastboot can handle the system image file as one while other fastboot require the system image file be broken into sparsechunks.
Sent from my XT1095 using XDA Free mobile app
Well just for the fun of it I tried flashing with fastboot from the SDK and then with mfastboot. Official fastboot split the system image just the mfastboot, it just wasn't quite as verbose as mfastboot.
Hi,
I flashed my beautiful smartphone with CyanogenMod, then I decided to go back to stock. During this latest step I forgot to backup the EFS folder (I was neither knowing its existence!) and now it is corrupted (in About I have a Baseband unknown). How to fix? Is there a solution? Is there any hacker here??
Thanks a lot
Fabio
mrfabio80 said:
Hi,
I flashed my beautiful smartphone with CyanogenMod, then I decided to go back to stock. During this latest step I forgot to backup the EFS folder (I was neither knowing its existence!) and now it is corrupted (in About I have a Baseband unknown). How to fix? Is there a solution? Is there any hacker here??
Thanks a lot
Fabio
Click to expand...
Click to collapse
Try flashing the stock radio. You didn't tell us your model/carrier so I could not link the firmware you need.
Sent from my XT1095 using Tapatalk
AGISCI said:
Try flashing the stock radio. You didn't tell us your model/carrier so I could not link the firmware you need.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Hi, thanks a lot for your answer.. I have a retde XT1092 and restoring to stock using the Motorola guidelines didn't solve... I opened a thread also in the Motorola forum:
https://forums.motorola.com/posts/bc9598199a?commentId=992184#992184
Especially these didn't solve:
$ fastboot flash modem NON-HLOS.bin
$ fastboot erase modemst1
$ fastboot erase modemst2
$ fastboot flash fsg fsg.mbn
from:
https://motorola-global-portal.custhelp.com/app/standalone/bootloader/recovery-images
That is the wrong firmware. The xt1095 has a different radio. You need the radio from this file:
http://www.filefactory.com/file/3oippfwh4oil/VICTARA_RETDE_XT1092_5.1_LPE23.32-25.3_cid7_CFC.xml.zip
The instructions are the same. Just use this ones radio.
Sent from my XT1095 using Tapatalk
AGISCI said:
That is the wrong firmware. The xt1095 has a different radio. You need the radio from this file:
http://www.filefactory.com/file/3oippfwh4oil/VICTARA_RETDE_XT1092_5.1_LPE23.32-25.3_cid7_CFC.xml.zip
The instructions are the same. Just use this ones radio.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Yes I know that URL ! I always restored from there using XT1092, tried with kitkat 5.0 and 5.1 without any success ...
Well if that didn't work, then I assume it is either your PDS partition that is corrupt, or a hardware failure. If you didn't backup your PDS partition there is no hope to fix it yourself. You will have to most likely bring it to a service center to get it fixed.
Sent from my XT1095 using Tapatalk
Please help, my moto x 2014 wont boot what so ever. This first started from when I tried to root my XT1097 on android 5.1 using this: http://forum.xda-developers.com/mot...e-edition-superboot-style-root-motox-t2889264 not realizing it wasn't for android 5.1. Then it was acting weird so I booted into fastboot and used a factory image which was for AT&T devices. Realizing this was the wrong image (No service or wifi what so ever) I flashed the proper image to return to stock, but now my device simply sits at the M logo and wont boot. Any help to get this device back up and running is appreciated!
Kevin_Desousa said:
Please help, my moto x 2014 wont boot what so ever. This first started from when I tried to root my XT1097 on android 5.1 using this: http://forum.xda-developers.com/mot...e-edition-superboot-style-root-motox-t2889264 not realizing it wasn't for android 5.1. Then it was acting weird so I booted into fastboot and used a factory image which was for AT&T devices. Realizing this was the wrong image (No service or wifi what so ever) I flashed the proper image to return to stock, but now my device simply sits at the M logo and wont boot. Any help to get this device back up and running is appreciated!
Click to expand...
Click to collapse
Did you wipe data/factory reset when you reflashed your firmware?
Sent from my XT1095 using Tapatalk
xKroniK13x said:
Did you wipe data/factory reset when you reflashed your firmware?
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Yep, I wiped them both as per usual. If it helps, I can still access fastboot and recovery.
If it is sticking at the M, its failing to boot Android at all. Does it roll into recovery automatically? Which firmware did you flash? Also, was the version flashed older than the one you previously had?
Sent from my XT1095 using Tapatalk
xKroniK13x said:
If it is sticking at the M, its failing to boot Android at all. Does it roll into recovery automatically? Which firmware did you flash? Also, was the version flashed older than the one you previously had?
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
It doesn't seem to roll into recovery automatically. I flashed this initially : VICTARA_ATT_5.0.2_LXE22.46-34 (AT&T zip), and then I flashed this one: RETCA_XT1097_5.0.1_LXE22.46-22. I forgot which version I had before I tried rooting, but I do know it was android 5.1.
Kevin_Desousa said:
It doesn't seem to roll into recovery automatically. I flashed this initially : VICTARA_ATT_5.0.2_LXE22.46-34 (AT&T zip), and then I flashed this one: RETCA_XT1097_5.0.1_LXE22.46-22
Click to expand...
Click to collapse
Is your bootloader unlocked? If you went to the 5.0.2 AT&T and your bootloader is locked, you won't be able to downgrade back to 5.0.1. Try getting a firmware that is the same version or newer.
Sent from my XT1095 using Tapatalk
xKroniK13x said:
Is your bootloader unlocked? If you went to the 5.0.2 AT&T and your bootloader is locked, you won't be able to downgrade back to 5.0.1. Try getting a firmware that is the same version or newer.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
My bootloader is unlocked, and when I say that I'm stuck at the M, I mean I'm stuck at the bootloader warning. (I didn't know what to call it)
Kevin_Desousa said:
My bootloader is unlocked, and when I say that I'm stuck at the M, I mean I'm stuck at the bootloader warning. (I didn't know what to call it)
Click to expand...
Click to collapse
Yeah, that's where I figured it was hanging. All signs just point to a bad flash/firmware. I'd try downloading a different version (even 5.1 since you're unlocked) or verifying the hash on the firmware you flashed. You can use HashMyFiles to check the md5 or SHA hashes.
Sent from my XT1095 using Tapatalk
xKroniK13x said:
Yeah, that's where I figured it was hanging. All signs just point to a bad flash/firmware. I'd try downloading a different version (even 5.1 since you're unlocked) or verifying the hash on the firmware you flashed. You can use HashMyFiles to check the md5 or SHA hashes.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Would you know of a place where I can obtain the factory images then? The one I was using only had a couple of them, none of which were 5.1
Kevin_Desousa said:
Would you know of a place where I can obtain the factory images then? The one I was using only had a couple of them, none of which were 5.1
Click to expand...
Click to collapse
This thread has a link that has the 5.1 firmwares. You have to do some digging, but they should be there... http://forum.xda-developers.com/showthread.php?t=3148211
Sent from my XT1095 using Tapatalk
xKroniK13x said:
This thread has a link that has the 5.1 firmwares. You have to do some digging, but they should be there... http://forum.xda-developers.com/showthread.php?t=3148211
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Sorry to be such a pain, but would you have flash instructions for the official firmware? I'm just afraid of messing something up
Kevin_Desousa said:
Sorry to be such a pain, but would you have flash instructions for the official firmware? I'm just afraid of messing something up [emoji14]
Click to expand...
Click to collapse
I am personally a huge fan of House of Moto, it will generate automatic scripts to flash the firmware for you. Check out the thread here: http://www.droidrzr.com/index.php?/topic/61124-House-of-Moto-[4.3]
Also, MotoFirmware has some firmwares for the X2, I used to use them for my RAZR M. http://motofirmware.center/files/category/46-moto-x-2nd-generation/
Sent from my XT1095 using Tapatalk
xKroniK13x said:
I am personally a huge fan of House of Moto, it will generate automatic scripts to flash the firmware for you. Check out the thread here: http://www.droidrzr.com/index.php?/topic/61124-House-of-Moto-[4.3]
Also, MotoFirmware has some firmwares for the X2, I used to use them for my RAZR M. http://motofirmware.center/files/category/46-moto-x-2nd-generation/
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
I tried to use the House of Moto with this firmware: http://motofirmware.center/files/file/249-victara_tmo_51_lpe2332-213_cid9_cfcxmlzip/ but when I load it into the HOM it displays this: "Custom recovery not found.
Using factory image: VICTARA_TMO_5.1_LPE23.32-21.3_cid9_CFC.xml.zip
ERROR: XML script not found in this factory image. This is not yet supported."
Kevin_Desousa said:
I tried to use the House of Moto with this firmware: http://motofirmware.center/files/file/249-victara_tmo_51_lpe2332-213_cid9_cfcxmlzip/ but when I load it into the HOM it displays this: "Custom recovery not found.
Using factory image: VICTARA_TMO_5.1_LPE23.32-21.3_cid9_CFC.xml.zip
ERROR: XML script not found in this factory image. This is not yet supported."
Click to expand...
Click to collapse
That firmware looks like the one for xt1095/T-Mobile/Pure Edition. Also, that error sounds like the HoM instructions weren't followed right. I've flashed my device a bunch with HoM.
Sent from my XT1095 using Tapatalk
xKroniK13x said:
That firmware looks like the one for xt1095/T-Mobile/Pure Edition. Also, that error sounds like the HoM instructions weren't followed right. I've flashed my device a bunch with HoM.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Would this one work: VICTARA_NIIBR_XT1097_5.1_LPE23.32-14.2_cid12_CFC.xml.zip? I'm just confused with the "NIIBR" in the firmware name.
Kevin_Desousa said:
Would this one work: VICTARA_NIIBR_XT1097_5.1_LPE23.32-14.2_cid12_CFC.xml.zip? I'm just confused with the "NIIBR" in the firmware name.
Click to expand...
Click to collapse
I'm not sure, to be honest.
Sent from my XT1095 using Tapatalk
xKroniK13x said:
I'm not sure, to be honest.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
So the phone booted up, thank you so much for the help, but for some reason it wont detect my sim card, the wifi doesnt work on it, and it occasionally reboots. I also noticed that the baseband version is unknown. Is there a way to fix this?
Kevin_Desousa said:
So the phone booted up, thank you so much for the help, but for some reason it wont detect my sim card, the wifi doesnt work on it, and it occasionally reboots. I also noticed that the baseband version is unknown. Is there a way to fix this?
Click to expand...
Click to collapse
Sounds like whatever firmware you flashed had the wrong radios. You should be able to download the Canadian firmware and just flash the radios.
Sent from my XT1095 using Tapatalk
xKroniK13x said:
Sounds like whatever firmware you flashed had the wrong radios. You should be able to download the Canadian firmware and just flash the radios.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
I did flash the Canadian firmware to my knowledge. RETCA_XT1097_5.0.1_LXE22.46-22_cid14_CFC.xml?
I was browsing the xda threads and saw this thread: http://forum.xda-developers.com/moto-x-2014/general/guide-xt1097-to-xt1095-nextel-t2972693 where it states: "IMPORTANT. From 5.1 update, the modems included on the update are FULLY compatible with all models, XT1097, 1092 and 1093 and all carriers ,so, you don't have to worry about losing IMEI, signal or data." So, should I be able to flash the brazilian xt1097 firmware and have the proper radios installed from this thread: http://forum.xda-developers.com/moto-x-2014/general/ota-android-marshmallow-6-0-final-t3248315 ?
i updated my moto x 2014 (XT1095) to the current marshmallow and after a successful update , now i dont get any signal and when i check my imei too i get this (0) thus the number zero. please can some one help me out. any help is appreciated. i attached some images of it.
thanks.
branzy said:
i updated my moto x 2014 (XT1095) to the current marshmallow and after a successful update , now i dont get any signal and when i check my imei too i get this (0) thus the number zero. please can some one help me out. any help is appreciated. i attached some images of it.
thanks.
Click to expand...
Click to collapse
why system version have US Sprint ??? Maybe this phone is not XT1095 and not unlocked bootloader
md07 said:
why system version have US Sprint ??? Maybe this phone is not XT1095 and not unlocked bootloader
Click to expand...
Click to collapse
please am having unlocked bootloader. i have attached images .
please any help ?
branzy said:
please any help ?
Click to expand...
Click to collapse
Hi i had that problem so i fastboot flash my baseband it solved everything....
hutchjim said:
Hi i had that problem so i fastboot flash my baseband it solved everything....
Click to expand...
Click to collapse
what baseband version did u flashed ?
branzy said:
what baseband version did u flashed ?
Click to expand...
Click to collapse
You have to flash the one for the xt1095.
Sent from my XT1095 using Tapatalk
AGISCI said:
You have to flash the one for the xt1095.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
please can u send me a link where i can find modems to flash ?
You need to Google your modle of phone.they are image files k
branzy said:
please can u send me a link where i can find modems to flash ?
Click to expand...
Click to collapse
http://www.filefactory.com/file/5d66szhobgmx/VICTARA_TMO_XT1095_5.1_LPE23.32-21.6_cid9_CFC.xml.zip
Sent from my XT1095 using Tapatalk
Mine does show imei but it's not getting any signal.
I have an Xt1097 converted to xt1095 like 6 months ago, and i didn't have this issue for the lollipop 5.1 update. Weird. What should i do?
AGISCI said:
http://www.filefactory.com/file/5d66szhobgmx/VICTARA_TMO_XT1095_5.1_LPE23.32-21.6_cid9_CFC.xml.zip
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
i will download and feedback you.
md07 said:
why system version have US Sprint ??? Maybe this phone is not XT1095 and not unlocked bootloader
Click to expand...
Click to collapse
i got the box and when i looked on it it shows XT1094 not XT1095 so i think if i get XT1094 stock rom and flash it might work .
branzy said:
i got the box and when i looked on it it shows XT1094 not XT1095 so i think if i get XT1094 stock rom and flash it might work .
Click to expand...
Click to collapse
Correct you need the modem for the xt1094 to get it working again.
Sent from my XT1095 using Tapatalk
AGISCI said:
Correct you need the modem for the xt1094 to get it working again.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
currently the phone is running on a firmware (4.4.4) which is xt1095 . will i have to flash the whole xt1094 firmware or i should just flash the modem ?
branzy said:
currently the phone is running on a firmware (4.4.4) which is xt1095 . will i have to flash the whole xt1094 firmware or i should just flash the modem ?
Click to expand...
Click to collapse
Just the modem will get you signal again.
Sent from my XT1095 using Tapatalk
AGISCI said:
Just the modem will get you signal again.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
ok then i have to search for the modem to flash on it . please you can also send links corresponding to the modem .
thanks.
i have a quick question , now that the phone is on kitkat 4.4.4 can i flash a modem of 5.0 or 5.1 to get the signal working (xt1094)?
You can try, it might work.
branzy said:
i have a quick question , now that the phone is on kitkat 4.4.4 can i flash a modem of 5.0 or 5.1 to get the signal working (xt1094)?
Click to expand...
Click to collapse
I have recently rooted, my device. Thanks to CF. But in the whole bunch of flash coding, just make sure you are not flashing your modems. Below are the commands I had avoided while flashing the rom.
$ fastboot flash modem NON-HLOS.bin
$ fastboot erase modemst1
$ fastboot erase modemst2
Now, in case of yours, you can try to flash with modem of 5.0 or 5.1 but I would recommend to go-ahead with 4.4.4 since that was original.
Incase if you failed to find it, then try with 5.0 or 5.1
ashishcw said:
I have recently rooted, my device. Thanks to CF. But in the whole bunch of flash coding, just make sure you are not flashing your modems. Below are the commands I had avoided while flashing the rom.
$ fastboot flash modem NON-HLOS.bin
$ fastboot erase modemst1
$ fastboot erase modemst2
Now, in case of yours, you can try to flash with modem of 5.0 or 5.1 but I would recommend to go-ahead with 4.4.4 since that was original.
Incase if you failed to find it, then try with 5.0 or 5.1
Click to expand...
Click to collapse
$ fastboot flash modem NON-HLOS.bin
$ fastboot erase modemst1
$ fastboot erase modemst2
which means that if i ignore this code it could get my signal back previously ?