After my brush to write third-party ROM Z1 display baseband unknown?Model is L39h,Including CM, slim display baseband so unknown ? Ask how to solve ? Thanks!
Flash firmware file using Flashtool. While flashing exclude everything else but keep Baseband.
pharix said:
Flash firmware file using Flashtool. While flashing exclude everything else but keep Baseband.
Click to expand...
Click to collapse
This support third-party rom baseband where? The official version of the baseband brush directly?
Li_Kai said:
This support third-party rom baseband where? The official version of the baseband brush directly?
Click to expand...
Click to collapse
Tell me about your ROM, FW version, etc...
pharix said:
Tell me about your ROM, FW version, etc...
Click to expand...
Click to collapse
L39h?14.4.A.0.108?baseband 8974-AAAAANAZQ-10270054-51
Related
hey
Im currently using apocalypse rom and its running pretty good on my ace.
I read a post saying that its better to install a different baseband (XXKPT)
im abit confused cause on my phone info now it says baseband: S5830NEKT2 and version 2.3.7
but the xxkpt is 2.3.6 ?
so shouldnt the 2.3.7 be a better baseband?
There is no need to change the baseband unless you are having any problems in the rom because of it.
The baseband change referred in the apocalypse thread is for changing the region of the firmware, not the version. You may use 2.3.7 for you region, but if there is any problem with the rom that a reflash or fresh Odin install is not solving, or due to app 2 sd scripts, then you should try a firmware from a different region, it has helped many people.
If the region(firmware's) you are going for has a different version then you have no choice but to downgrade.
ayush29k said:
There is no need to change the baseband unless you are having any problems in the rom because of it.
The baseband change referred in the apocalypse thread is for changing the region of the firmware, not the version. You may use 2.3.7 for you region, but if there is any problem with the rom that a reflash or fresh Odin install is not solving, or due to app 2 sd scripts, then you should try a firmware from a different region, it has helped many people.
If the region(firmware's) you are going for has a different version then you have no choice but to downgrade.
Click to expand...
Click to collapse
thanks for the info. its much clearer now!
i did want to try a different baseband because of the app2sd bugs on the one i have.(with link2sd and amarullz)
It seems quite straightforward to flash another baseband with odin so might give it a go.
is there anyway to bkup the one i have now? or to find a download link? had a quick look on sammobile.com but didnt find the one i currently have(S5830NEKT2)
You can make a cwm backup,but i don't know if it backs up the baseband or not.
i mean if you restore this on another firmware then you will get this baseband back or not, i am not sure about that.
ayush29k said:
You can make a cwm backup,but i don't know if it backs up the baseband or not.
i mean if you restore this on another firmware then you will get this baseband back or not, i am not sure about that.
Click to expand...
Click to collapse
Yes, it does...
I'm not sure to completely understand.... If I choose the baseband of my country (XWKS9) and I flash on my cm7.2 stable official I'll change the firmware also no ?? If yes can you tell me how to change the baseband without change firmware ?
Thanks
Sent from my GT-S5830 with Tapatalk
289jul said:
I'm not sure to completely understand.... If I choose the baseband of my country (XWKS9) and I flash on my cm7.2 stable official I'll change the firmware also no ?? If yes can you tell me how to change the baseband without change firmware ?
Thanks
Sent from my GT-S5830 with Tapatalk
Click to expand...
Click to collapse
Just flash the cwm zip for baseband or also known as modem...it will only change the baseband then...but i don't see much need of doing so because it's seldom that baseband causes problems...
Ryuinferno said:
Just flash the cwm zip for baseband or also known as modem...it will only change the baseband then...but i don't see much need of doing so because it's seldom that baseband causes problems...
Click to expand...
Click to collapse
It is quite rare but its there with the apocalypse rom, somehow the rom +sdext scripts have different compatibility with different basebands.
Sent from my GT-S5830
Hello
I'm going to flash the official 4.3 firmware but not sure if it's non-banded firmware
so will it work if i exclude the Baseband in flashtool ?
thanks
R##T said:
Hello
I'm going to flash the official 4.3 firmware but not sure if it's non-banded firmware
so will it work if i exclude the Baseband in flashtool ?
thanks
Click to expand...
Click to collapse
yes
HI,
For some reason LTE i not working in my country (israel)
my carrier told me that i must have 4.3 rom which is not available by regular update.
Is there any way to solve this?
i read something about updating the baseband.
Thanks
update the software using flashtool, you don't need to wait for your carrier to update the firmware
Richy99 said:
update the software using flashtool, you don't need to wait for your carrier to update the firmware
Click to expand...
Click to collapse
my current rom is 4.2.2 and the baseband is 9x15A-acefwmazq-30110089-64
where can i find newer versions?
Jozee01 said:
my current rom is 4.2.2 and the baseband is 9x15A-acefwmazq-30110089-64
where can i find newer versions?
Click to expand...
Click to collapse
Search in the general section, there are plenty of stock firmwares.
Hi,
I'm using Paranoid Android 4.5 Alpha 2 and I wonder how to update modem baseband to latest version without losing my actual configuration and ROM.
Is it possible?
If so, can you tell me how and what do I need.
Thanks by advance
zeduck said:
Hi,
I'm using Paranoid Android 4.5 Alpha 2 and I wonder how to update modem baseband to latest version without losing my actual configuration and ROM.
Is it possible?
If so, can you tell me how and what do I need.
Thanks by advance
Click to expand...
Click to collapse
why do you want to flash baseband?
Because I have issues with phone calls.
So I would like to take advantage of the latest baseband that would maybe fix those.
zeduck said:
Because I have issues with phone calls.
So I would like to take advantage of the latest baseband that would maybe fix those.
Click to expand...
Click to collapse
it might be an operator issue/rom bug.
dont fiddle with the baseband
It's not an operator problem.
So I suppose the problem is from my side (phone).
I used to have a Nexus 4 and ROM and baseband are 2 different things that you can flash independently.
Are you sure it's not the same with Xperia Z?
I already saw some topics with titles like Baseband Generic US something. But I did not find any Generic FR at the latest version.
zeduck said:
It's not an operator problem.
So I suppose the problem is from my side (phone).
I used to have a Nexus 4 and ROM and baseband are 2 different things that you can flash independently.
Are you sure it's not the same with Xperia Z?
I already saw some topics with titles like Baseband Generic US something. But I did not find any Generic FR at the latest version.
Click to expand...
Click to collapse
You can download the french firmware and just flash the baseband from flashtool
Edit: Why dont you try EU firmware
I found out one topic for generic FR latest firmware and I used your trick flashing only the baseband.
Thanks!
Now I will see with the time if it's making my phone work better.
zeduck said:
I found out one topic for generic FR latest firmware and I used your trick flashing only the baseband.
Thanks!
Now I will see with the time if it's making my phone work better.
Click to expand...
Click to collapse
:highfive::good:
is it possible to flash international firmware to my japan docomo so-03g z3+/z4? TIA!
francisac3 said:
is it possible to flash international firmware to my japan docomo so-03g z3+/z4? TIA!
Click to expand...
Click to collapse
i think you can try. you can flash so-03g ftf if it not work. note: EXCLUDE: partition and TA.
And the result?
Someone flashed so-03g on e6553?
anyone?
any updates? result?
orangpelupa said:
any updates? result?
Click to expand...
Click to collapse
Yes, tried. It works using Flashtool 9.18. Remember to tick TA, FORTA, PAR. I must untick BASEBAND, otherwise keep FC on the Enterprise Service