Related
I have been asked by @ZEROLEMON_OFFICIAL to start a thread for the purpose of posting reviews of their Ultra Glass Armor 9H tempered glass screen protectors for the HTC M8.
***DO NOT START A SEPARATE THREAD FOR THE PURPOSE OF WRITING YOUR OWN REVIEW. ALL REVIEWS OF THIS PRODUCT SHOULD GO IN THIS THREAD ONLY. ALL OTHERS WILL BE REMOVED BY THE MODERATION TEAM***
My review is as follows:
I received my tempered glass screen protector in the mail the other day. Everything was neatly packaged and included everything to install the screen protector. The wording of the instructions on how to install the screen protector was a bit confusing, but I've used a screen protector before so I knew how to install one. The only real issue I had was getting the protective film off the sticky side of the screen protector itself. The pull tab-style sticker came right off but the film itself remained, so I had to use a fingernail to pick at the edge of the film and then finally remove it. The screen protector went right on and looks great. I've only noticed a couple of issues, those being the screen protector seems to have a bit more glare than the actual screen of the phone, but I didn't find this to be an issue when viewing the phone in various lighting conditions. Also, it does seem to pick up dust fairly quickly. Overall, for the price you'd pay at an online store like Amazon, I don't think you'll find a better value tempered glass screen protector. Pick one up for yourself and see:good:
Amazon currently has them for $8.99.
Zerolemon Ultra Glass Armor 9H Tempered Glass Screen Protector on Amazon
Magnum_Enforcer said:
My review is as follows:
I received my tempered glass screen protector in the mail the other day. Everything was neatly packaged. The wording of the instructions on how to install the screen protector was a bit confusing, but I've used a screen protector before so I knew how to install one. The only real issue I had was getting the protective film off the sticky side of the screen protector itself. The pull tab-style sticker came right off but the film itself remained, so I had to use a fingernail to pick at the edge of the film and then finally remove it. The screen protector went right on and looks great. I've only noticed a couple of issues, those being the screen protector seems to have a bit more glare than the actual screen of the phone, but I didn't find this to be an issue when viewing the phone in various lighting conditions. Also, it does seem to pick up dust fairly quickly. Overall, for the price you'd pay at an online store like Amazon, I don't think you'll find a better value tempered glass screen protector. Pick one up for yourself and see:good:
Amazon currently has them for $8.99.
Zerolemon Ultra Glass Armor 9H Tempered Glass Screen Protector on Amazon
Click to expand...
Click to collapse
Thanks for your feedback. The pull tab-style sticker should be able to stick on the film so the film will be easy to peel off. Maybe you are just unlucky, sorry. Below is the revised version of instruction which will be applied to the new batch.
1.Please wipe off all fingerprints and oil stains from the screen with the included alcohol swab. Wipe the screen with the included microfiber cloth for drying.
2.Place phone on flat surface with screen facing up. Peel the first plastic adhesive off and align the screen protector edge with the phone's edge.
3.Gently place the screen protector on the screen. The screen protector will automatically adhere to the surface of the screen.
4. If there are bubbles between the screen protector and the phone, please use a flat card to gently push out the bubbles to the edge of the phone.
5. Installation complete.
Those instructions are much better:good:
OMG INCREDIBLE!! Of all the shields I have had, this is surely my last from anyone. I am sticking to Zerolemon from now on. My other shields was fingerprint magnets, not this one. Easy to put on, and thinner than any other shield. Here is my 5 Star review from Amazon:
""I got the shield today, it was a snap to install. Thinner than my Chinese shield, and surprisingly almost fingerprint proof. The one thing I hated about my last shield was it attracted all my fingerprints. I always was cleaning it. But this one doesn't seem to even know my fingers even touched it. I can see the prints after heavy use, but so easy to clean, and barely visible, it is remarkable. This has got to be the best shield out there. And I have had one on all my phones. But now, this is probably going to be the only one I will have in the future. It's like touching the glass without any shield. Only con is that it seems to attract dust. But given that it is so invisible to the sight and touch a little POOF and no dust at all, I think it is static, because it is new, and will soon wear off. But if you need a shield, heck, YOU DO NEED A SHIELD!! This is the one to buy...""
This has attracted my attention. It is the best one I have ever had on any of my phones. (Now if you can make those camera lens covers from this material, I would be extremely happy) :laugh:
I received mine on Saturday. Beautiful packaging. The instructions where a bit on the small side, but its pretty self explanatory. The application went well enough, but keep in mind that this glass seems to be cut exactly the same size as the glass on the M8. So when you start to apply it make sure it starts exactly where it does on the phone. If you are even a little pulled away from the start of the glass on the opposite side of the glass it wont stick down because it will be slightly on the speaker grill. After getting that straightened out it looks incredible. For the price you cant go wrong.
Anyone who knows how to take care of a phone knows you need a screen protector.
Scratch proof glass just isn't after enough time has passed. But there's a reason manufacturers stick with glass for screens. It's tactile, your finger glides over it with silky precision. It gives the phone a solid and dependable touch to it. A solid reassurance. Most importantly, glass gives the best transmission of light from the underlying pixels so it makes the display look vibrant.
Then you have to slap some cheap plastic on top of it, This was far easy to apply to the phone. The glass and the phone join together like magic, after you have aliened it over the phone the two bond together, the Best part is there isn't a bubble beneath it, which I can't stand in plastic screens.
This is a revolutionary product. I love it. There are only a few cons to having this is an ever so slight increase in thickness in your phone. Plastic screen protectors are negligibly thick but glass has to be a bit thicker to be effective. Personally, I like the added thickness, modern phones are, to me, increasingly flimsy feeling. This gives it a bit more substance (My case still fits without issues as-well). I have also found 2 out of 4 corners are a little sharp and could of been slightly more rounded.
Overall this is one amazing screen protector and I look forward to showing it off on my phone.
How many taken part in this thread actually paid for theirs? Given that ZeroLemon were offering free units in return for reviews. It's hard to determine genuine positives from this thread. Has anyone compared this product to the others such as Nillkin (arguably best tempered screen protector), Mime, Zagg etc.
Sent from my HTC One_M8 using Tapatalk
Chris_c81 said:
How many taken part in this thread actually paid for theirs? Given that ZeroLemon were offering free units in return for reviews. It's hard to determine genuine positives from this thread. Has anyone compared this product to the others such as Nillkin (arguably best tempered screen protector), Mime, Zagg etc.
Sent from my HTC One_M8 using Tapatalk
Click to expand...
Click to collapse
I have had the Nilkin on my M8, saved the screen when it fell on the floor when I was in the doctors office. But it was thicker, and always showed my fingerprints. This screen (Even though I didn't pay for it) is the best I have had. I have had tempered glass on my screens for a couple years, almost always the cheap ones from China that takes 6+ weeks to get here. This one is local and cost is similar, would I have bought it? I don't normally shop Amazon, so unless it was on eBay I probably would not, unless I seen it on someones device, or at least heard good news about it. I didn't even know that the glass resist fingerprints. Would I but another? Yep... I have already showed it to a friend, and she is going to get her M8 this weekend and order this shield. Because it is a lot better than the one on her M7. So even though you might think that the review is biased because it was free, it isn't. It is a good shield and not bad on the price either.... :good:
I got mine in the mail today.
1. It is awesome. It covers the entire glass portion of the front of the phone. Not just the active LCD area.
2. It is extremely smooth. This makes it feel as if it is not there.
3. It's oleophobic coating is superb. Haven't seen a single finger print.
4. It is extremely clear, I cannot tell it is there.
5. I have it paired with the Otter box symmetry case and feel as if my phone has the ultimate protection.
6. The only draw back was during the installation I kept getting a raised corner. This was because Tue glass is cut to very small tolerances and matches the M8's screen perfectly. I had to slow down and focus on what I was doing.
All in all I am pretty happy with it and will be buying a second one to keep as a backup. I see this protector lasting the life of phone and keeping the resale value in since the screen will be in perfect condition whenever it is peeled off.
Chris_c81 said:
How many taken part in this thread actually paid for theirs? Given that ZeroLemon were offering free units in return for reviews. It's hard to determine genuine positives from this thread. Has anyone compared this product to the others such as Nillkin (arguably best tempered screen protector), Mime, Zagg etc.
Sent from my HTC One_M8 using Tapatalk
Click to expand...
Click to collapse
I understand your concern. We are sending free samples in exchange for an honest review. We do not send samples to everyone, only legit users. You guys are welcome to compare our screen protector with other brands.
I have received my tempered glass protector from Zerolemon. Before I start I'll say that it was sent for review on condition that I review it. They told me to make an honest review, and never set any guidelines which leaves me to do and say whatever I'd like. I am in no way obliged to give a good review as they have nothing on me and have not told me otherwise.
The protector arrived in excellent, eco-friendly packaging that was simplistic yet effective in explaining what the product is and how to install it. Right away I could tell that the glass protector was of good quality and not simply a Chinese knock-off. I have used dozens of protectors including Spigen's $40.00 Nano slim, and this is comparable, if not better given the price.
The protector installed without a hassle, and aligned IDENTICALLY with my screen. The cut-out is perfect unlike other protectors, and offers maximum coverage with no exposed areas of the screen.
Included in the package are an anti-bacterial wipe and cloth to make sure you screen is very clean before installation. Once done, you take off the back film from the glass protector and simply let it adhere to the screen of your M8.
Again, this review was is in no way dictated by ZeroLemon, and I could of written anything I wanted. In fact, I already had another tempered glass protector installed so I didn't even need a 'free sample'.
I give this product a 10/10 simply because it's of top quality, and for the price, you cannot beat it.
I have recently received an ultra glass 9h tempered glass screen protector from zerolemon about a week ago. Upon first glance the packaging is well put together with the screen protector placed securely inside. The packaging comes with the tempered glass protector, a microfiber cloth, and an alcohol wipe to clean the screen off. The directions can be kind of confusing if you have never applied a screen protector or a glass screen protector before as they seem to be worded weird. If you apply to protector properly it looks extremely nice and feels as if there were no protector on it. The one thing I do not like about this glass protector is that it is a little on the thick side. With a case on the phone thou you don’t really notice how thick it is, but I do not use a case so I can feel the thickness of the protector. Without the case I need to be more careful when I put it and pull it out of my pocket to make sure that it doesn’t peel off or catch on the inside of my pocket. I have also noticed that this protector can have a little bit of glare in direct sunlight or light unlike the screen with no protector on it but it’s not that bad. All in all this a fantastic screen protector and for $8.99 you can’t really beat the price for any other screen protector, especially a glass protector. I would recommend this protector to anyone who wants to get a glass protector and give it shot!
What is the thickness of the protector?
suparnemo said:
What is the thickness of the protector?
Click to expand...
Click to collapse
0.3 I believe.
Sent from my HTC One_M8 using Tapatalk
Real World Use - PASS!!!
Ok, i was normally running naked since i've had my m8 and got a .10 cent chine film screen protector for a while but it fell off on one of my trips to the beach. I contacted zerolemon to inquire upon the free product.
Fast forward a week and i got it 3 days ago. Putting it on was a snap, its very precise with its cuts. My crappy chinese case was very close to not fitting but it did with a little adjusting.
Now yesterday at santa cruz my girlfriend put our phones on trunk lid area while we grabbed our stuff. She grabbed her phone and we started closing the lid and foolishly we slammed the trunk 2 times. i eventually notices my phone and immediately freaked out, but fortunately the only cracks was 3 in diff areas, and my actual screen was unharmed. If it wasn't for this product i would have a cracked phone right now and im still rocking my slightly cracked glass armor until i order a new one soon.
I'm giving this screen 10/10 across everything just for saving my ass. I highly reccomend this screen
Now that is a test I don't want to try. LoL
Why are there over a dozen phony 5 Star reviews posted on Amazon?
http://www.amazon.com/Lifetime-Warr...er=2&showViewpoints=0&sortBy=byRankDescending
just lou said:
Why are there over a dozen phony 5 Star reviews posted on Amazon?
http://www.amazon.com/Lifetime-Warr...er=2&showViewpoints=0&sortBy=byRankDescending
Click to expand...
Click to collapse
Just place cards, not really phony. If you wanted to test it out free, then you need to review it, good or bad. But so we was ask to post a temp review on there till we get the screen and check it out. Once it is checked out, the tester can go back and edit his review to show what he/she feels about it.
Oditius said:
Just place cards, not really phony. If you wanted to test it out free, then you need to review it, good or bad. But so we was ask to post a temp review on there till we get the screen and check it out. Once it is checked out, the tester can go back and edit his review to show what he/she feels about it.
Click to expand...
Click to collapse
Unbelievable. A "temp" review? Why not let people review the item after they actually use it, instead of telling people to leave 5 star reviews for an item they don't even have yet?
I was looking into some kind of oleophobic coating or glass screen protector for my M8 after using my brother's Moto X for a while and realizing his screen is way smoother and more comfortable to use. I looked up some glass screen protectors on Amazon, and there are a load of different ones that seem almost exactly the same - 9H hardness, 0.33mm thickness, etc. Is there any real appreciable difference between them? Which one feels the best?
The best in my opinion is stilgut it costs about 20$ and it has the hardness of 9H with a really good oleo phobic coating on it you get two out of the package
As long as you don't plan on dropping the phone, just order the cheap ones for like $4-7, or go to xtremeguard, sign up for their emails, and wait for a 90% code. I use those all the time, and recommend them to friends. My brother has dropped his phone twice with those on, and only the glass screen messed up, not his actual phone screen. If you use a dot view or flip case of any sort, go with a more expensive one, the xtremeguard one's are too thick for flip type cases.
It seems that all currently available on AliExpress (at least) tempered glass protection are flawed, because of:
1- Protectors that covers the body in full, and has some black areas: has actually glue only on the black non-transparent zones, but nothing on display area it self (so only display ages, upper and lower parts has glue), this makes it rubbish, because it will not stick well to the screen, one or two gaming sessions and it will end in recycle bin.
2- Fully transparent one, with full screen coverage: because 1+5 has 2.5D screen, those covers will not stick well on phone edges since tempered glass is rigid, this maybe can be used only with covers that overlap edges of the screen also.
3-Fully transparent one that don't cover all of the screen: those usually stick well, but only if they left about 5mm on each edge uncovered! I believe it is clear that such a gap ruins the protective purpose of the tempered glass, aside the ugly look due to gaps. (Again, having an edge overlapping cover could make it look better)
So it seems the only practical option for now is to use usual non glass protection unfortunately.
If I missed something or you have some suggestions please let me know..Some manufacturers claims that there protector is 4D, what means that it should solve all above issues, i didn't try those yet, anybody tested them?
I am regretting removing original 1+5 protection
As I bought and still use an Orzly tempered glass protector I concur with your analysis at this time. When I first applied the Orzly is was perfect without the issues some experienced but after 3+ weeks the sides must have lifted slightly due to my bumper case and dust particles got underneath next to the left/right buttons. Since then I've been religiously looking for an alternate that passes the case test but none so far have come to light.
I like the feel of the tempered glass so much that I've resisting going back to the film/plastic alternatives which I had always used in the past. I'm even considering going naked on the screen, relying on Gorilla Glass 5, but continue with a bumper case. Or the reverse, by using an Orzly but with no bumper case as I already have a dBrand skin applied. None of those options seem all that appealing. The one protector that seems to work with a 2.5D screen is the Galaxy 8's Whitestone Dome Glass but it's a crazy expensive $41USD and difficult to apply. I'm not sure even if a OnePlus 5 version was available I'd spend that much money.
I haven't had any luck with any tempered glass., due to point 2 which has been raised:
2- Fully transparent one, with full screen coverage: because 1+5 has 2.5D screen, those covers will not stick well on phone edges since tempered glass is rigid, this maybe can be used only with covers that overlap edges of the screen also.
Click to expand...
Click to collapse
After reading all of the reviews I decided just to leave the plastic one on until someone gets their act together and offers a proper tgsp for the OP5
Sent from my OnePlus5 using XDA Labs
Agreed with OP and all of above. I had and still have the Orzly TG protector on, but dust underneath. I want to go back to the usual plastic ones, but don't know which one covers as well/much as the original one that came with the phone. Any recommendations?
Sent from my ONEPLUS A5000 using Tapatalk
Im still waiting for my Nilkin glass protector to arrive (it's almost been a month, sigh)
If this one has the same issue as the ones I've tried before it (lack of adhesive around the edges), I'm going to try and go back to using plastic screen protectors.
I don't want to use my device without one, but I also hate how these glass protectors don't fully adhere to the screen around the sides (including top and bottom)
Biuzko tempered glass screen protector from Amazon had been working perfectly for me for many weeks.
Megaflop666 said:
Biuzko tempered glass screen protector from Amazon had been working perfectly for me for many weeks.
Click to expand...
Click to collapse
Can anybody confirm this?
on yt you have a channel big ubox and there one guy test a lot of tempered glasses and cover for OP5 also the Biuzko one.
graja84 said:
on yt you have a channel big ubox and there one guy test a lot of tempered glasses and cover for OP5 also the Biuzko one.
Click to expand...
Click to collapse
The YouTube channel you mention is also my favorite choice for screen protector info for the Oneplus 5. He always tests the protectors with various cases. His branding of the channel can get annoying but his market coverage is excellent and vast. With the plethora of tempered screen protectors its your choice for an accompanying case that often makes a big difference in your satisfaction. Here is the Big unBox - Biuzko review.
One thing I noticed is when the Big unBox applied the Official OnePlus 5 tgsp video it had lots of bubbles on the edges that he said couldn't be removed while I watched XDA's TK review and his application looked perfect with TK giving it a thumbs up. In the comment section of that review TK said all was well even after a month of usage. I was surprised as the Official tgsp has garnered horrible reviews and comments in the XDA Oneplus 5 accessories section. The most consistent criticism of the Official tgsp is that it cuts off a tiny fraction of the screen. In fact, so far my research indicates all of the "Full Adhesive", "Full coverage" tgsp cut off part of the screen. Personally I think the reason they have a black line on the edges is to hide inevitable bubbles due to the curved edge. The thicker the tempered glass the wider the side black stripes (e.g. Orzly versus Official).
Here is the criteria I'm using in selecting a replacement for my Orzly tgsp and cheap bumper case. Note that I've already installed a dBrand skin so that skews my criteria somewhat.
Tempered Glass screen protector:
- Must have full adhesive (not just top/bottom and side adhesion) and full coverage
- Would prefer, but am a tiny bit flexible on, part of the screen being cut off (limit is that not one pixel of the notification bar's clock is trimmed)
- Must have an oleophobic coating
Case:
- Needs to be as non intrusive as possible adding grip but not greatly ruining the sleekness of the phone
- Uses a minimalist design and/or clear materials so as not to obstruct viewing of the dBrand skin I've installed
- With the case on the buttons (power and volume rocker) must not be difficult to press
So far my research has me leaning towards the Official OnePlus 5 or Biuzko tgsp with a Rhinoshield Crashguard case. My one issue is that the Rhinoshield reviews always mention how difficult the volume rocker buttons are to press. Here is the video that has me leaning in that direction as is seems to best address my criteria
OnePlus 5 best case/protector setup
I'll being doing more reading and searching today hoping to find the unicorn of tgsp/case combinations. The dust under my Orzly is driving me mad but the feel and responsiveness of its surface has me rejecting a film/plastic protector alternative.
I'm using the Biuzko as well with the Tudia MERGE case no problems.
The trick is to first put OP5 in the case, THEN place the screen protector on. It fits perfectly, and you can't mess up the alignment since it falls right in. Then I just try to put pressure on the sticky parts for a few minutes.
I've had no problems for 3 weeks now.
I installed mine the same way, but I'm using the op5 carbon fiber case.
Sent from my ONEPLUS A5000 using Tapatalk
The original plastic cover was just perfect, is there is any possibility to find an équivalence ?
There's only tempered glasses on internet
akhage said:
The original plastic cover was just perfect, is there is any possibility to find an équivalence ?
There's only tempered glasses on internet
Click to expand...
Click to collapse
Hello,
I recommend you the plastic screen protectors from GadgetShieldz. I made a review about it on another post on xda but to summarize, it's a bit difficult to apply but then it's great. The screen looks good and it's cheap ^^ highly recommend.
FYI, I was struggling with TGSP for the OP5 and I just gave up. There is no good alternative atm.
TMSxXDA said:
It seems that all currently available on AliExpress (at least) tempered glass protection are flawed, because of:
1- Protectors that covers the body in full, and has some black areas: has actually glue only on the black non-transparent zones, but nothing on display area it self (so only display ages, upper and lower parts has glue), this makes it rubbish, because it will not stick well to the screen, one or two gaming sessions and it will end in recycle bin.
2- Fully transparent one, with full screen coverage: because 1+5 has 2.5D screen, those covers will not stick well on phone edges since tempered glass is rigid, this maybe can be used only with covers that overlap edges of the screen also.
3-Fully transparent one that don't cover all of the screen: those usually stick well, but only if they left about 5mm on each edge uncovered! I believe it is clear that such a gap ruins the protective purpose of the tempered glass, aside the ugly look due to gaps. (Again, having an edge overlapping cover could make it look better)
So it seems the only practical option for now is to use usual non glass protection unfortunately.
If I missed something or you have some suggestions please let me know..Some manufacturers claims that there protector is 4D, what means that it should solve all above issues, i didn't try those yet, anybody tested them?
I am regretting removing original 1+5 protection
Click to expand...
Click to collapse
Thanks for this, I recently just applied it and noticed all the issues you raised.
akhage said:
The original plastic cover was just perfect, is there is any possibility to find an équivalence ?
There's only tempered glasses on internet
Click to expand...
Click to collapse
Skinomi makes a wet application protector in both clear and matte. I posted pics of the matte version here. Since that post, I've experienced no scratches or orange peel effect. It's also great for no fingerprints.
You can always get the Nillkin H+ Pro, but only if you are using a spigen case or otterbox. Right now I am using the Spigen Rugged Armor with Nillkin H+ Pro and the gap between the glass and the case is around 1 mm (i would say 1.5 mm if I have to be more accurate). The Otterbox case is even better but I find it too bulky, tried it once for an hour and I did not enjoy it, but some of you may like it.
Few words about the Nillkin H+ Pro.
I know there are few variants of the Nillkin glass and I have tried all of them in the past. In my opinion the best glass is exactly the H+ Pro even tho it is a 1 dollar more expensive. The glass has zero rainbow effect or halo effect, it is 99 to 100% clear. It has amazing orleophobic coating. My Honor 8 has the same glass for 6 months now and it is flawless. I am going to change my nillkin glass with the official 3D tempered glass but only because I received the rhinoshield bumper. Otherwise I would not change my nillkin. You are going to get used to the small gap in a week or so.
Don't leave the phone without a glass.
I just applied mine, best screen protector I ever had, pure quality. Quote me on that
I love the official OnePlus screen protector, it's premium & looks good. Who ever made this thread is straight up wrong. The one he recommended is no Bueno, the glass part doesn't have enhesive. Look I am a OnePlus 5 conisuer, the screen protector is fantastic ?
I have siegen case. Can I buy the original screen protector from oneplus store with no problems? Or can I suggest me something with dust proof and oil proof ?
Ever since I got my galaxy note 8 as the greatest x-mas gift ever, I've been searching for a compatible screen protector with the case I have right now. So far, I have an interest in rhino shield, b/c it looks like IT MIGHT be compatible with the otter box defender( the case I have now), but idk because I have no experience with any kind of screen protector with this phone. Of anyone has any recommendations for what screen protector I should get, please let me know.
P.S. I want this phone to look as perfect as when I first got it , so any screen protectors that leave a rainbow effect are a no go. Thanks for any input as it is greatly appreciated!
Do you want glass or a film protector? I have a wet-apply Spigen film protector for now and it's great with no rainbow or any other issue. I prefer glass, but the two I tried so far were horrible (Inskin and another brand I can't recall at the moment). Just ordered a Whitestone dome so we'll see how that stacks up. The Spigen film is a good backup option though.
I'm also interested in this.... I have the otterbox defender... dropped the phone yesterday. It must have landed on the corner of one of my steps on my front porch. Cracked the screen.
So I'm in the market either for some kind of really good screen protector to work with my Defender... or a new case altogether that actually covers the front of the phone, once I get my replacement.
Whitestone dome not compatible with Note8 and Otterbox defender - see youtube review
sefrcoko said:
Do you want glass or a film protector? I have a wet-apply Spigen film protector for now and it's great with no rainbow or any other issue. I prefer glass, but the two I tried so far were horrible (Inskin and another brand I can't recall at the moment). Just ordered a Whitestone dome so we'll see how that stacks up. The Spigen film is a good backup option though.
Click to expand...
Click to collapse
I saw a Youtube review that says Whttestone Dome not compatible with Otterbox Defender.
With the rounded side edges, this will not be an easy phone to fit screen protectors for. Please post if you find any others.
This is what I have found so far. All ship from China and take 4-6 weeks for delivery.
Vinyl:
Olixar brand on MobileFun website. $10.99
TPU:
AVIDET brand on Amazon website. $7.99
Glass:
HHUAN brand on Amazon website. $11.97
ZAGG InvisibleShield Ultra VisionGuard+ Screen Protector from Verizon
Great screen protector! Fits perfect with a case and includes a small one for the secondary screen. Easy install. Would def recommend
Whitestone Dome glass
Whitestone has a screen protector for the LG wing have anyone use Whitestone before any good?
I use Mi 10 Pro hydrogel screen protector . Just got a screen protector without the hole for the selfie camera. Cost around $1 per protector.
https://www.amazon.com/gp/product/B08L78S31X/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
I got this one and fits perfectly and no bubbles after I installed it and left it overnight
Just got these, installed and now I cannot get my fingerprint to register. I deleted it retrained it with the screen protector on and still no luck.
Got these. Typically I steer clear of the screen protector film. I generally always go with the tempered glass screen protector. But since the fingerprint wouldn't work with the tempered glass and tried this film. See link below. Works great feels smooth like glass. Provides better grip also. I put one on the screen as well as on the back of the phone. I can open and close it with one hand now because there's a little extra grip on the screen. Fingerprint also works with these.
https://www.amazon.com/gp/aw/d/B08L78S31X?psc=1&ref=ppx_pop_mob_b_asin_title
kaluna00 said:
Got these. Typically I steer clear of the screen protector film. I generally always go with the tempered glass screen protector. But since the fingerprint wouldn't work with the tempered glass and tried this film. See link below. Works great feels smooth like glass. Provides better grip also. I put one on the screen as well as on the back of the phone. I can open and close it with one hand now because there's a little extra grip on the screen. Fingerprint also works with these.
https://www.amazon.com/gp/aw/d/B08L78S31X?psc=1&ref=ppx_pop_mob_b_asin_title
Click to expand...
Click to collapse
THX for the link, just ordered.
I typically don't use screen protectors at all, just the liquid sealers.
I'm actually more interested in using to cover the back of the phone.
Did you cut out a hole for the cameras,& if so, how did you go about doing so?
I plan on using my Spigen case to trace out & cut w/an X-Acto knife.
Considered getting a skin for the Galaxy S20/S20 + (closest I could find, dimension wise), but, it'd still need some alterations, so, I skipped that idea.
If anyone finds a bodyskin for the Wing, please post a link in this thread.
KOLIOSIS said:
THX for the link, just ordered.
I typically don't use screen protectors at all, just the liquid sealers.
I'm actually more interested in using to cover the back of the phone.
Did you cut out a hole for the cameras,& if so, how did you go about doing so?
I plan on using my Spigen case to trace out & cut w/an X-Acto knife.
Considered getting a skin for the Galaxy S20/S20 + (closest I could find, dimension wise), but, it'd still need some alterations, so, I skipped that idea.
If anyone finds a bodyskin for the Wing, please post a link in this thread.
Click to expand...
Click to collapse
I cut a notch around all three cameras. I figured it would at least protect the back of the phone when I get my case. For now hopefully it'll help it not get scratched
Front screen, bottom screen, and back have the film on them... Liking it.
Has anyone found a tempered glass screen protector that the the finger print sensor works through?
I ordered a Spigen case from Amazon, but decided to upgrade to a better one I found at a T-Mobile store. I have AT&T and it didn't matter at all in regards to the accessories I got today. They also had a screen protector which I purchased as well. It's pricey compared to amazon, it has more support on the sides than the Spigen one does. The screen protector I bought wasn't an Invisishield, it's a Case Mate and it's working very well for me. Just wanted to thrown that out there in case it cam help anyone.
Is the Case-Mate a tempered glass screen protector or a film?
Thanks for sharing
There is a tempered glass screen protector on Amazon. It's made by UniqueMe. Only sticks at the edges, but fits well and wraps around the curved screen. Feels great to the touch. And touchscreen sensitivity works extremely well. Optically, I'd give it an 8 out of 10.
When installing, you need to line it up with the bottom edge of the screen so that there is a gap at the top. This is needed to let the light dimming sensor see out. Also, it is quite fragile. I dropped my phone into a soft bath mat and the screen protector cracked.
Already on my third UniqueMe. Fingerprint sensing works decently. You have to get the hang of it. If possible, definitely re-enroll your finger prints after installing the protector. Works much better that way.
Amazon.com: [2 Pack] UniqueMe Screen Protector for LG Wing 5G Tempered Glass, 3D Full Coverage Film HD [Easy Installation] Edge to Edge Protection : Cell Phones & Accessories
Buy [2 Pack] UniqueMe Screen Protector for LG Wing 5G Tempered Glass, 3D Full Coverage Film HD [Easy Installation] Edge to Edge Protection: Screen Protectors - Amazon.com ✓ FREE DELIVERY possible on eligible purchases
www.amazon.com
kaluna00 said:
Is the Case-Mate a tempered glass screen protector or a film?
Thanks for sharing
Click to expand...
Click to collapse
You’re welcome and according to their site it’s one of each for each screen. It‘s working very well for me so far. I like it. Also, if the link has to be removed for a rule violation I’m unaware of mods please do so.
Anyone knows if theres a privacy screen protector tpu film for the LG wing thats really good
I hope it is there
This is all I got doesn't make me feel very protected
Ohiojeff said:
This is all I got doesn't make me feel very protected
Click to expand...
Click to collapse
WING Front Screen Case / Protector
This is only first gen., but if I had some of these available. Would anybody be interested in using these?
forum.xda-developers.com
kaluna00 said:
WING Front Screen Case / Protector
This is only first gen., but if I had some of these available. Would anybody be interested in using these?
forum.xda-developers.com
Click to expand...
Click to collapse
I bought 2 from you. I like the idea but a hard rubber material would be much better than the plastic. Both of mine have broken from 1st drops. They did protect the front screen though.