It seems that all currently available on AliExpress (at least) tempered glass protection are flawed, because of:
1- Protectors that covers the body in full, and has some black areas: has actually glue only on the black non-transparent zones, but nothing on display area it self (so only display ages, upper and lower parts has glue), this makes it rubbish, because it will not stick well to the screen, one or two gaming sessions and it will end in recycle bin.
2- Fully transparent one, with full screen coverage: because 1+5 has 2.5D screen, those covers will not stick well on phone edges since tempered glass is rigid, this maybe can be used only with covers that overlap edges of the screen also.
3-Fully transparent one that don't cover all of the screen: those usually stick well, but only if they left about 5mm on each edge uncovered! I believe it is clear that such a gap ruins the protective purpose of the tempered glass, aside the ugly look due to gaps. (Again, having an edge overlapping cover could make it look better)
So it seems the only practical option for now is to use usual non glass protection unfortunately.
If I missed something or you have some suggestions please let me know..Some manufacturers claims that there protector is 4D, what means that it should solve all above issues, i didn't try those yet, anybody tested them?
I am regretting removing original 1+5 protection
As I bought and still use an Orzly tempered glass protector I concur with your analysis at this time. When I first applied the Orzly is was perfect without the issues some experienced but after 3+ weeks the sides must have lifted slightly due to my bumper case and dust particles got underneath next to the left/right buttons. Since then I've been religiously looking for an alternate that passes the case test but none so far have come to light.
I like the feel of the tempered glass so much that I've resisting going back to the film/plastic alternatives which I had always used in the past. I'm even considering going naked on the screen, relying on Gorilla Glass 5, but continue with a bumper case. Or the reverse, by using an Orzly but with no bumper case as I already have a dBrand skin applied. None of those options seem all that appealing. The one protector that seems to work with a 2.5D screen is the Galaxy 8's Whitestone Dome Glass but it's a crazy expensive $41USD and difficult to apply. I'm not sure even if a OnePlus 5 version was available I'd spend that much money.
I haven't had any luck with any tempered glass., due to point 2 which has been raised:
2- Fully transparent one, with full screen coverage: because 1+5 has 2.5D screen, those covers will not stick well on phone edges since tempered glass is rigid, this maybe can be used only with covers that overlap edges of the screen also.
Click to expand...
Click to collapse
After reading all of the reviews I decided just to leave the plastic one on until someone gets their act together and offers a proper tgsp for the OP5
Sent from my OnePlus5 using XDA Labs
Agreed with OP and all of above. I had and still have the Orzly TG protector on, but dust underneath. I want to go back to the usual plastic ones, but don't know which one covers as well/much as the original one that came with the phone. Any recommendations?
Sent from my ONEPLUS A5000 using Tapatalk
Im still waiting for my Nilkin glass protector to arrive (it's almost been a month, sigh)
If this one has the same issue as the ones I've tried before it (lack of adhesive around the edges), I'm going to try and go back to using plastic screen protectors.
I don't want to use my device without one, but I also hate how these glass protectors don't fully adhere to the screen around the sides (including top and bottom)
Biuzko tempered glass screen protector from Amazon had been working perfectly for me for many weeks.
Megaflop666 said:
Biuzko tempered glass screen protector from Amazon had been working perfectly for me for many weeks.
Click to expand...
Click to collapse
Can anybody confirm this?
on yt you have a channel big ubox and there one guy test a lot of tempered glasses and cover for OP5 also the Biuzko one.
graja84 said:
on yt you have a channel big ubox and there one guy test a lot of tempered glasses and cover for OP5 also the Biuzko one.
Click to expand...
Click to collapse
The YouTube channel you mention is also my favorite choice for screen protector info for the Oneplus 5. He always tests the protectors with various cases. His branding of the channel can get annoying but his market coverage is excellent and vast. With the plethora of tempered screen protectors its your choice for an accompanying case that often makes a big difference in your satisfaction. Here is the Big unBox - Biuzko review.
One thing I noticed is when the Big unBox applied the Official OnePlus 5 tgsp video it had lots of bubbles on the edges that he said couldn't be removed while I watched XDA's TK review and his application looked perfect with TK giving it a thumbs up. In the comment section of that review TK said all was well even after a month of usage. I was surprised as the Official tgsp has garnered horrible reviews and comments in the XDA Oneplus 5 accessories section. The most consistent criticism of the Official tgsp is that it cuts off a tiny fraction of the screen. In fact, so far my research indicates all of the "Full Adhesive", "Full coverage" tgsp cut off part of the screen. Personally I think the reason they have a black line on the edges is to hide inevitable bubbles due to the curved edge. The thicker the tempered glass the wider the side black stripes (e.g. Orzly versus Official).
Here is the criteria I'm using in selecting a replacement for my Orzly tgsp and cheap bumper case. Note that I've already installed a dBrand skin so that skews my criteria somewhat.
Tempered Glass screen protector:
- Must have full adhesive (not just top/bottom and side adhesion) and full coverage
- Would prefer, but am a tiny bit flexible on, part of the screen being cut off (limit is that not one pixel of the notification bar's clock is trimmed)
- Must have an oleophobic coating
Case:
- Needs to be as non intrusive as possible adding grip but not greatly ruining the sleekness of the phone
- Uses a minimalist design and/or clear materials so as not to obstruct viewing of the dBrand skin I've installed
- With the case on the buttons (power and volume rocker) must not be difficult to press
So far my research has me leaning towards the Official OnePlus 5 or Biuzko tgsp with a Rhinoshield Crashguard case. My one issue is that the Rhinoshield reviews always mention how difficult the volume rocker buttons are to press. Here is the video that has me leaning in that direction as is seems to best address my criteria
OnePlus 5 best case/protector setup
I'll being doing more reading and searching today hoping to find the unicorn of tgsp/case combinations. The dust under my Orzly is driving me mad but the feel and responsiveness of its surface has me rejecting a film/plastic protector alternative.
I'm using the Biuzko as well with the Tudia MERGE case no problems.
The trick is to first put OP5 in the case, THEN place the screen protector on. It fits perfectly, and you can't mess up the alignment since it falls right in. Then I just try to put pressure on the sticky parts for a few minutes.
I've had no problems for 3 weeks now.
I installed mine the same way, but I'm using the op5 carbon fiber case.
Sent from my ONEPLUS A5000 using Tapatalk
The original plastic cover was just perfect, is there is any possibility to find an équivalence ?
There's only tempered glasses on internet
akhage said:
The original plastic cover was just perfect, is there is any possibility to find an équivalence ?
There's only tempered glasses on internet
Click to expand...
Click to collapse
Hello,
I recommend you the plastic screen protectors from GadgetShieldz. I made a review about it on another post on xda but to summarize, it's a bit difficult to apply but then it's great. The screen looks good and it's cheap ^^ highly recommend.
FYI, I was struggling with TGSP for the OP5 and I just gave up. There is no good alternative atm.
TMSxXDA said:
It seems that all currently available on AliExpress (at least) tempered glass protection are flawed, because of:
1- Protectors that covers the body in full, and has some black areas: has actually glue only on the black non-transparent zones, but nothing on display area it self (so only display ages, upper and lower parts has glue), this makes it rubbish, because it will not stick well to the screen, one or two gaming sessions and it will end in recycle bin.
2- Fully transparent one, with full screen coverage: because 1+5 has 2.5D screen, those covers will not stick well on phone edges since tempered glass is rigid, this maybe can be used only with covers that overlap edges of the screen also.
3-Fully transparent one that don't cover all of the screen: those usually stick well, but only if they left about 5mm on each edge uncovered! I believe it is clear that such a gap ruins the protective purpose of the tempered glass, aside the ugly look due to gaps. (Again, having an edge overlapping cover could make it look better)
So it seems the only practical option for now is to use usual non glass protection unfortunately.
If I missed something or you have some suggestions please let me know..Some manufacturers claims that there protector is 4D, what means that it should solve all above issues, i didn't try those yet, anybody tested them?
I am regretting removing original 1+5 protection
Click to expand...
Click to collapse
Thanks for this, I recently just applied it and noticed all the issues you raised.
akhage said:
The original plastic cover was just perfect, is there is any possibility to find an équivalence ?
There's only tempered glasses on internet
Click to expand...
Click to collapse
Skinomi makes a wet application protector in both clear and matte. I posted pics of the matte version here. Since that post, I've experienced no scratches or orange peel effect. It's also great for no fingerprints.
You can always get the Nillkin H+ Pro, but only if you are using a spigen case or otterbox. Right now I am using the Spigen Rugged Armor with Nillkin H+ Pro and the gap between the glass and the case is around 1 mm (i would say 1.5 mm if I have to be more accurate). The Otterbox case is even better but I find it too bulky, tried it once for an hour and I did not enjoy it, but some of you may like it.
Few words about the Nillkin H+ Pro.
I know there are few variants of the Nillkin glass and I have tried all of them in the past. In my opinion the best glass is exactly the H+ Pro even tho it is a 1 dollar more expensive. The glass has zero rainbow effect or halo effect, it is 99 to 100% clear. It has amazing orleophobic coating. My Honor 8 has the same glass for 6 months now and it is flawless. I am going to change my nillkin glass with the official 3D tempered glass but only because I received the rhinoshield bumper. Otherwise I would not change my nillkin. You are going to get used to the small gap in a week or so.
Don't leave the phone without a glass.
I just applied mine, best screen protector I ever had, pure quality. Quote me on that
I love the official OnePlus screen protector, it's premium & looks good. Who ever made this thread is straight up wrong. The one he recommended is no Bueno, the glass part doesn't have enhesive. Look I am a OnePlus 5 conisuer, the screen protector is fantastic ?
I have siegen case. Can I buy the original screen protector from oneplus store with no problems? Or can I suggest me something with dust proof and oil proof ?
Related
I have been asked by @ZEROLEMON_OFFICIAL to start a thread for the purpose of posting reviews of their Ultra Glass Armor 9H tempered glass screen protectors for the HTC M8.
***DO NOT START A SEPARATE THREAD FOR THE PURPOSE OF WRITING YOUR OWN REVIEW. ALL REVIEWS OF THIS PRODUCT SHOULD GO IN THIS THREAD ONLY. ALL OTHERS WILL BE REMOVED BY THE MODERATION TEAM***
My review is as follows:
I received my tempered glass screen protector in the mail the other day. Everything was neatly packaged and included everything to install the screen protector. The wording of the instructions on how to install the screen protector was a bit confusing, but I've used a screen protector before so I knew how to install one. The only real issue I had was getting the protective film off the sticky side of the screen protector itself. The pull tab-style sticker came right off but the film itself remained, so I had to use a fingernail to pick at the edge of the film and then finally remove it. The screen protector went right on and looks great. I've only noticed a couple of issues, those being the screen protector seems to have a bit more glare than the actual screen of the phone, but I didn't find this to be an issue when viewing the phone in various lighting conditions. Also, it does seem to pick up dust fairly quickly. Overall, for the price you'd pay at an online store like Amazon, I don't think you'll find a better value tempered glass screen protector. Pick one up for yourself and see:good:
Amazon currently has them for $8.99.
Zerolemon Ultra Glass Armor 9H Tempered Glass Screen Protector on Amazon
Magnum_Enforcer said:
My review is as follows:
I received my tempered glass screen protector in the mail the other day. Everything was neatly packaged. The wording of the instructions on how to install the screen protector was a bit confusing, but I've used a screen protector before so I knew how to install one. The only real issue I had was getting the protective film off the sticky side of the screen protector itself. The pull tab-style sticker came right off but the film itself remained, so I had to use a fingernail to pick at the edge of the film and then finally remove it. The screen protector went right on and looks great. I've only noticed a couple of issues, those being the screen protector seems to have a bit more glare than the actual screen of the phone, but I didn't find this to be an issue when viewing the phone in various lighting conditions. Also, it does seem to pick up dust fairly quickly. Overall, for the price you'd pay at an online store like Amazon, I don't think you'll find a better value tempered glass screen protector. Pick one up for yourself and see:good:
Amazon currently has them for $8.99.
Zerolemon Ultra Glass Armor 9H Tempered Glass Screen Protector on Amazon
Click to expand...
Click to collapse
Thanks for your feedback. The pull tab-style sticker should be able to stick on the film so the film will be easy to peel off. Maybe you are just unlucky, sorry. Below is the revised version of instruction which will be applied to the new batch.
1.Please wipe off all fingerprints and oil stains from the screen with the included alcohol swab. Wipe the screen with the included microfiber cloth for drying.
2.Place phone on flat surface with screen facing up. Peel the first plastic adhesive off and align the screen protector edge with the phone's edge.
3.Gently place the screen protector on the screen. The screen protector will automatically adhere to the surface of the screen.
4. If there are bubbles between the screen protector and the phone, please use a flat card to gently push out the bubbles to the edge of the phone.
5. Installation complete.
Those instructions are much better:good:
OMG INCREDIBLE!! Of all the shields I have had, this is surely my last from anyone. I am sticking to Zerolemon from now on. My other shields was fingerprint magnets, not this one. Easy to put on, and thinner than any other shield. Here is my 5 Star review from Amazon:
""I got the shield today, it was a snap to install. Thinner than my Chinese shield, and surprisingly almost fingerprint proof. The one thing I hated about my last shield was it attracted all my fingerprints. I always was cleaning it. But this one doesn't seem to even know my fingers even touched it. I can see the prints after heavy use, but so easy to clean, and barely visible, it is remarkable. This has got to be the best shield out there. And I have had one on all my phones. But now, this is probably going to be the only one I will have in the future. It's like touching the glass without any shield. Only con is that it seems to attract dust. But given that it is so invisible to the sight and touch a little POOF and no dust at all, I think it is static, because it is new, and will soon wear off. But if you need a shield, heck, YOU DO NEED A SHIELD!! This is the one to buy...""
This has attracted my attention. It is the best one I have ever had on any of my phones. (Now if you can make those camera lens covers from this material, I would be extremely happy) :laugh:
I received mine on Saturday. Beautiful packaging. The instructions where a bit on the small side, but its pretty self explanatory. The application went well enough, but keep in mind that this glass seems to be cut exactly the same size as the glass on the M8. So when you start to apply it make sure it starts exactly where it does on the phone. If you are even a little pulled away from the start of the glass on the opposite side of the glass it wont stick down because it will be slightly on the speaker grill. After getting that straightened out it looks incredible. For the price you cant go wrong.
Anyone who knows how to take care of a phone knows you need a screen protector.
Scratch proof glass just isn't after enough time has passed. But there's a reason manufacturers stick with glass for screens. It's tactile, your finger glides over it with silky precision. It gives the phone a solid and dependable touch to it. A solid reassurance. Most importantly, glass gives the best transmission of light from the underlying pixels so it makes the display look vibrant.
Then you have to slap some cheap plastic on top of it, This was far easy to apply to the phone. The glass and the phone join together like magic, after you have aliened it over the phone the two bond together, the Best part is there isn't a bubble beneath it, which I can't stand in plastic screens.
This is a revolutionary product. I love it. There are only a few cons to having this is an ever so slight increase in thickness in your phone. Plastic screen protectors are negligibly thick but glass has to be a bit thicker to be effective. Personally, I like the added thickness, modern phones are, to me, increasingly flimsy feeling. This gives it a bit more substance (My case still fits without issues as-well). I have also found 2 out of 4 corners are a little sharp and could of been slightly more rounded.
Overall this is one amazing screen protector and I look forward to showing it off on my phone.
How many taken part in this thread actually paid for theirs? Given that ZeroLemon were offering free units in return for reviews. It's hard to determine genuine positives from this thread. Has anyone compared this product to the others such as Nillkin (arguably best tempered screen protector), Mime, Zagg etc.
Sent from my HTC One_M8 using Tapatalk
Chris_c81 said:
How many taken part in this thread actually paid for theirs? Given that ZeroLemon were offering free units in return for reviews. It's hard to determine genuine positives from this thread. Has anyone compared this product to the others such as Nillkin (arguably best tempered screen protector), Mime, Zagg etc.
Sent from my HTC One_M8 using Tapatalk
Click to expand...
Click to collapse
I have had the Nilkin on my M8, saved the screen when it fell on the floor when I was in the doctors office. But it was thicker, and always showed my fingerprints. This screen (Even though I didn't pay for it) is the best I have had. I have had tempered glass on my screens for a couple years, almost always the cheap ones from China that takes 6+ weeks to get here. This one is local and cost is similar, would I have bought it? I don't normally shop Amazon, so unless it was on eBay I probably would not, unless I seen it on someones device, or at least heard good news about it. I didn't even know that the glass resist fingerprints. Would I but another? Yep... I have already showed it to a friend, and she is going to get her M8 this weekend and order this shield. Because it is a lot better than the one on her M7. So even though you might think that the review is biased because it was free, it isn't. It is a good shield and not bad on the price either.... :good:
I got mine in the mail today.
1. It is awesome. It covers the entire glass portion of the front of the phone. Not just the active LCD area.
2. It is extremely smooth. This makes it feel as if it is not there.
3. It's oleophobic coating is superb. Haven't seen a single finger print.
4. It is extremely clear, I cannot tell it is there.
5. I have it paired with the Otter box symmetry case and feel as if my phone has the ultimate protection.
6. The only draw back was during the installation I kept getting a raised corner. This was because Tue glass is cut to very small tolerances and matches the M8's screen perfectly. I had to slow down and focus on what I was doing.
All in all I am pretty happy with it and will be buying a second one to keep as a backup. I see this protector lasting the life of phone and keeping the resale value in since the screen will be in perfect condition whenever it is peeled off.
Chris_c81 said:
How many taken part in this thread actually paid for theirs? Given that ZeroLemon were offering free units in return for reviews. It's hard to determine genuine positives from this thread. Has anyone compared this product to the others such as Nillkin (arguably best tempered screen protector), Mime, Zagg etc.
Sent from my HTC One_M8 using Tapatalk
Click to expand...
Click to collapse
I understand your concern. We are sending free samples in exchange for an honest review. We do not send samples to everyone, only legit users. You guys are welcome to compare our screen protector with other brands.
I have received my tempered glass protector from Zerolemon. Before I start I'll say that it was sent for review on condition that I review it. They told me to make an honest review, and never set any guidelines which leaves me to do and say whatever I'd like. I am in no way obliged to give a good review as they have nothing on me and have not told me otherwise.
The protector arrived in excellent, eco-friendly packaging that was simplistic yet effective in explaining what the product is and how to install it. Right away I could tell that the glass protector was of good quality and not simply a Chinese knock-off. I have used dozens of protectors including Spigen's $40.00 Nano slim, and this is comparable, if not better given the price.
The protector installed without a hassle, and aligned IDENTICALLY with my screen. The cut-out is perfect unlike other protectors, and offers maximum coverage with no exposed areas of the screen.
Included in the package are an anti-bacterial wipe and cloth to make sure you screen is very clean before installation. Once done, you take off the back film from the glass protector and simply let it adhere to the screen of your M8.
Again, this review was is in no way dictated by ZeroLemon, and I could of written anything I wanted. In fact, I already had another tempered glass protector installed so I didn't even need a 'free sample'.
I give this product a 10/10 simply because it's of top quality, and for the price, you cannot beat it.
I have recently received an ultra glass 9h tempered glass screen protector from zerolemon about a week ago. Upon first glance the packaging is well put together with the screen protector placed securely inside. The packaging comes with the tempered glass protector, a microfiber cloth, and an alcohol wipe to clean the screen off. The directions can be kind of confusing if you have never applied a screen protector or a glass screen protector before as they seem to be worded weird. If you apply to protector properly it looks extremely nice and feels as if there were no protector on it. The one thing I do not like about this glass protector is that it is a little on the thick side. With a case on the phone thou you don’t really notice how thick it is, but I do not use a case so I can feel the thickness of the protector. Without the case I need to be more careful when I put it and pull it out of my pocket to make sure that it doesn’t peel off or catch on the inside of my pocket. I have also noticed that this protector can have a little bit of glare in direct sunlight or light unlike the screen with no protector on it but it’s not that bad. All in all this a fantastic screen protector and for $8.99 you can’t really beat the price for any other screen protector, especially a glass protector. I would recommend this protector to anyone who wants to get a glass protector and give it shot!
What is the thickness of the protector?
suparnemo said:
What is the thickness of the protector?
Click to expand...
Click to collapse
0.3 I believe.
Sent from my HTC One_M8 using Tapatalk
Real World Use - PASS!!!
Ok, i was normally running naked since i've had my m8 and got a .10 cent chine film screen protector for a while but it fell off on one of my trips to the beach. I contacted zerolemon to inquire upon the free product.
Fast forward a week and i got it 3 days ago. Putting it on was a snap, its very precise with its cuts. My crappy chinese case was very close to not fitting but it did with a little adjusting.
Now yesterday at santa cruz my girlfriend put our phones on trunk lid area while we grabbed our stuff. She grabbed her phone and we started closing the lid and foolishly we slammed the trunk 2 times. i eventually notices my phone and immediately freaked out, but fortunately the only cracks was 3 in diff areas, and my actual screen was unharmed. If it wasn't for this product i would have a cracked phone right now and im still rocking my slightly cracked glass armor until i order a new one soon.
I'm giving this screen 10/10 across everything just for saving my ass. I highly reccomend this screen
Now that is a test I don't want to try. LoL
Why are there over a dozen phony 5 Star reviews posted on Amazon?
http://www.amazon.com/Lifetime-Warr...er=2&showViewpoints=0&sortBy=byRankDescending
just lou said:
Why are there over a dozen phony 5 Star reviews posted on Amazon?
http://www.amazon.com/Lifetime-Warr...er=2&showViewpoints=0&sortBy=byRankDescending
Click to expand...
Click to collapse
Just place cards, not really phony. If you wanted to test it out free, then you need to review it, good or bad. But so we was ask to post a temp review on there till we get the screen and check it out. Once it is checked out, the tester can go back and edit his review to show what he/she feels about it.
Oditius said:
Just place cards, not really phony. If you wanted to test it out free, then you need to review it, good or bad. But so we was ask to post a temp review on there till we get the screen and check it out. Once it is checked out, the tester can go back and edit his review to show what he/she feels about it.
Click to expand...
Click to collapse
Unbelievable. A "temp" review? Why not let people review the item after they actually use it, instead of telling people to leave 5 star reviews for an item they don't even have yet?
Having found several Tempered Glass screen protectors I tried unsatisfactory, I decided to try a German one on the theory that their engineering is often good. I purchased a Mikvon one (available on Amazon and eBay). It seems perfect to me. It is precision cut and the fit and cut-outs are just right. Maybe it could be one millimetre wider each side but then it would be capable of being installed over the curved edge of the Oneplus 3 screen. The edges of the protector are neatly rounded and inconspicuous in use. I cannot see any of the dots or halos that are present on other products, and it adheres across its full surface. I also cannot detect any loss of sensitivity. When installed there were a couple of bubbles, but these were easily expelled. I am using this in conjunction with an Orzly Fusion Bumper case, which seems to give good all-round protection.
nottheusualtoday said:
Having found several Tempered Glass screen protectors I tried unsatisfactory, I decided to try a German one on the theory that their engineering is often good. I purchased a Mikvon one (available on Amazon and eBay). It seems perfect to me. It is precision cut and the fit and cut-outs are just right. Maybe it could be one millimetre wider each side but then it would be capable of being installed over the curved edge of the Oneplus 3 screen. The edges of the protector are neatly rounded and inconspicuous in use. I cannot see any of the dots or halos that are present on other products, and it adheres across its full surface. I also cannot detect any loss of sensitivity. When installed there were a couple of bubbles, but these were easily expelled. I am using this in conjunction with an Orzly Fusion Bumper case, which seems to give good all-round protection.
Click to expand...
Click to collapse
this thing does not go all the way to edge it clearly says It on their selling ad..
https://www.amazon.com/gp/offer-listing/B01EWIB950/ref=dp_olp_new_mbc?ie=UTF8&condition=new
It cannot go all the way to the edge because of the curved edges of the Oneplus 3 screen. It goes as close as possible. It is invisible in use and it really doesn't matter.
Pics?
Sent from my ONEPLUS A3003 using Tapatalk
Please post some pics
I tried to take some pics. But I could not find a way to do this without reflections on the screen. I tried indoors and out. Anyway the tempered glass protector didn't show in any of them, as it is darn near invisible. It goes to about 1.5 mm from where the black framing of the screen starts. In my opinion any greater would not offer additional protection.
Does it actually covers the entire viewable screen?
Sent from my ONEPLUS A3000 using Tapatalk
It is 1.5 to 2mm less than the full viewable area, both sides. But I am never concsious of the edges of the protector. They hardly show, maybe because they are well rounded. I accept it would be great to have a protector the full width. But since this one is otherwise so precisely cut, I feel the designer made it as big as possible taking account of the screen curvature.
nottheusualtoday said:
It is 1.5 to 2mm less than the full viewable area, both sides. But I am never concsious of the edges of the protector. They hardly show, maybe because they are well rounded. I accept it would be great to have a protector the full width. But since this one is otherwise so precisely cut, I feel the designer made it as big as possible taking account of the screen curvature.
Click to expand...
Click to collapse
Thin its same than OnePlus own (not the curved one) tempered glass. Of course this one is cheaper than OnePlus version. But with word "perfect" i though this would be more perfect like edge to edge or covering all of viewable area. I have Nillkin tempered glass installed to my phone. It covers all viewable area but of course it contains little halo on the sides but less than 1mm so its not big deal for me. I dont even see it when using phone.
hello,
i will buy soon Xiaomi note 4x (32gb)
and i looking about good cover (be storng and durable, something like otterbox for lg or beter)
and good glass screen protector.
Budget: until 35$ for screen and until 35$ for cover.
pefer those who have registered mail in shipping.
thanks
tsahitsahi said:
hello,
i will buy soon Xiaomi note 4x (32gb)
and i looking about good cover (be storng and durable, something like otterbox for lg or beter)
and good glass screen protector.
Budget: until 35$ for screen and until 35$ for cover.
pefer those who have registered mail in shipping.
thanks
Click to expand...
Click to collapse
I've not found a "perfect" screen cover yet for the phone. I like the 2.5d screen but it makes finding a "perfect" tempered glass solution a problem. I have a full screen protector one on now and it's okay. I haven't found one of those that have adhesive on the entire back panel of the glass. The adhesive is only around the edges on the painted surfaces.
I have another one I haven't tried yet. It looks like it has adhesive on the entire back surface and the outer edges are made of carbon fiber (supposed to be anyway) The outer edges are at least a soft material that supposed to stick to the entire edge and curve around so that it fits a 2.5d screen better. The problem with the ones I bought is that you can't see the backlight from the buttons on the bottom of the phone. Not a deal breaker but a flaw in the design.
Do some searches on aliexpress or someplace and you'll see. Search for redmi note 4x carbon fiber to see the second one I mentioned and redmi note 4x tempered glass for the full screen ones I also mentioned. There are clear non full screen ones that don't go to the edges of the glass. I haven't purchased one of those and probably won't.
It's really hard to find something decent. I personally prefer the traditional tempered glass screen protectors, but I've tried three now and they all look terrible, huge white marks on the sides even though the tempered glass doesn't cover the full screen. The full coverage one lost its adhesive due to my case pushing up against it, and it looks awful with weird adhesive marks in the middle. Honestly I'm contemplating going back to a film screen protector because I just can't find a tempered glass screen protector that will work for me. Also worth noting that I have a friend with a White Redmi Note 4x and I was able to transplant my screen protector onto this device with zero issues, so it's as if the black variant has glass that is more curved than normal
stephendt0 said:
It's really hard to find something decent. I personally prefer the traditional tempered glass screen protectors, but I've tried three now and they all look terrible, huge white marks on the sides even though the tempered glass doesn't cover the full screen. The full coverage one lost its adhesive due to my case pushing up against it, and it looks awful with weird adhesive marks in the middle. Honestly I'm contemplating going back to a film screen protector because I just can't find a tempered glass screen protector that will work for me. Also worth noting that I have a friend with a White Redmi Note 4x and I was able to transplant my screen protector onto this device with zero issues, so it's as if the black variant has glass that is more curved than normal
Click to expand...
Click to collapse
I applied my tempered glass with my case on the phone. It's one of the full screen protectors with the painted frame around the outside. I think they do that to hide the fact that the glass doesn't fit to the curve. It looks good but I know it's not a perfect fit.
Upon research there appears to be fluid you can apply to the edges to get a perfect seal to remove the halo effect... I will investigate further
With my new case I posted about the full screen tempered glass looks perfect except for the fact they don't put adhesive on the entire back panel. Just under the painted area.
prisoner1969 said:
With my new case I posted about the full screen tempered glass looks perfect except for the fact they don't put adhesive on the entire back panel. Just under the painted area.
Click to expand...
Click to collapse
Yes... in my experience this doesn't last. I had two lift up and get dust underneath and then it was horrible after that. Also I got the weird rainbow effect in the middle of the glass and the keys at the bottom didn't line up exactly.
tsahitsahi said:
hello,
i will buy soon Xiaomi note 4x (32gb)
and i looking about good cover (be storng and durable, something like otterbox for lg or beter)
and good glass screen protector.
Budget: until 35$ for screen and until 35$ for cover.
pefer those who have registered mail in shipping.
thanks
Click to expand...
Click to collapse
Buy from glazedinc.com
It's a perfect fit and it costs ₹400, they also provide cash on delivery in India.
Sent from my Moto G (4) using Tapatalk
I stay in Hyderabad India and on the name of tempered glasses they are just selling cheap flimsy transparent fiber or thin glass kind of material which is easily broken they are not actually tempered though the cover has a picture of hammer but they are not tempered glass.
Atharkhan101 said:
I stay in Hyderabad India and on the name of tempered glasses they are just selling cheap flimsy transparent fiber or thin glass kind of material which is easily broken they are not actually tempered though the cover has a picture of hammer but they are not tempered glass.
Click to expand...
Click to collapse
As no hard material can cover a curved glass manufacturers need to make a hybrid glass. What I have done is bought a edge to edge glass from glazedinc.com and a tpu case from local market, edge to edge glass protects my display from scratches without compromising the looks and tpu case protects my device from falls. It's the nearest to perfect solution one can do for the note 4
Sent from my Redmi Note 4 using Tapatalk
pooniaprashant said:
As no hard material can cover a curved glass manufacturers need to make a hybrid glass. What I have done is bought a edge to edge glass from glazedinc.com and a tpu case from local market, edge to edge glass protects my display from scratches without compromising the looks and tpu case protects my device from falls. It's the nearest to perfect solution one can do for the note 4
Sent from my Redmi Note 4 using Tapatalk
Click to expand...
Click to collapse
Good to hear I too bought the edge to edge tempered glass which is still flimsy but still can protect the screen without compromising the looks however I'm looking forward to purchase hard kickstand case which can protect the device when it falls. Kindly give me the link of that TPU case you bought and please tell me if it is hard enough to protect the phone. Thanks in advance.
Atharkhan101 said:
Good to hear I too bought the edge to edge tempered glass which is still flimsy but still can protect the screen without compromising the looks however I'm looking forward to purchase hard kickstand case which can protect the device when it falls. Kindly give me the link of that TPU case you bought and please tell me if it is hard enough to protect the phone. Thanks in advance.
Click to expand...
Click to collapse
tpu case was bought from local market (for about ₹150), if you are asking for tempered glass then just goto glazedinc.com
I've been thinking of getting something to protect my precious and the original plastic one has lots of scratches on it.
so Tempered glass or Hydrogel film?
I've been doing research on this question too. It's like a mixed reviews. But a commonly seen answer is that they regret getting the hydro gel version and stick to the conventional tempered glass as some buyers indicated after a few days, the edge came off peeling and trapping dust while some others has high static attracting dust and easily scratch.
I usually prefer Tempered glass.
Always glass, clarity and feel always superior to film.
A good brand would be Nillkin - I buy this off Ali express. The oleophobic coating is great and you can actually feel the smoothness difference vs a $2 cheapo glass protector.
http://s.aliexpress.com/rQje6z6R
I have bought it for multiple previous devices and am waiting for my Mate 10 glass delivery.
It is fragile though, have to be careful not to place it on the table face down with any sand or grit, it can scratch. Usually I have a case with a bit of a lip to protect it.
Obviously it can crack if you drop it also.
Sent from my ALP-L29 using Tapatalk
Anyone found a tempered glass protector that actually does not lift on the sides? Such a pity if one uses a glass that doesn't cover the whole display.. =(
Changed mine over to 9h yesterday. Just feels so much better than the plastic film.
Cccmachins said:
Changed mine over to 9h yesterday. Just feels so much better than the plastic film.
Click to expand...
Click to collapse
What brand did you get and does it cover the whole screen?
Ozero 2 pack from Amazon. Not a bad glass. No rainbow on the screen just a little thick. Like someone else said it makes you feel like your pressing into a hole with the thicker glass. They should taper the protector around the navigation button to make it feel better. Yeah covers all the screen. Except the bottom of the navigation button.
Pictures
Cccmachins said:
Ozero 2 pack from Amazon. Not a bad glass. No rainbow on the screen just a little thick. Like someone else said it makes you feel like your pressing into a hole with the thicker glass. They should taper the protector around the navigation button to make it feel better. Yeah covers all the screen. Except the bottom of the navigation button.
Click to expand...
Click to collapse
Can you post some pictures of the screen protector installed? I'm looking to get a screen protector myself but they are a number of brands I dont know and no reviews for any of them yet.
Jevansent said:
Always glass, clarity and feel always superior to film.
A good brand would be Nillkin - I buy this off Ali express. The oleophobic coating is great and you can actually feel the smoothness difference vs a $2 cheapo glass protector.
http://s.aliexpress.com/rQje6z6R
I have bought it for multiple previous devices and am waiting for my Mate 10 glass delivery.
It is fragile though, have to be careful not to place it on the table face down with any sand or grit, it can scratch. Usually I have a case with a bit of a lip to protect it.
Obviously it can crack if you drop it also.
Sent from my ALP-L29 using Tapatalk
Click to expand...
Click to collapse
Hi !
I agree with you. I've talked to the seller and the their Mate 10 Pro Amazing H+ should go on sale. I'm gonna get one.
My Mate 10 Pro hasn't arrived yet, I'm getting Moka brown color ^^ but for sure Nillkin is good
http://www.nillkin.com/english/proshow.asp?mid=2&sid=0&tid=0&cid=1&scid=&id=7328&page=1
Darktitor said:
Hi !
I agree with you. I've talked to the seller and the their Mate 10 Pro Amazing H+ should go on sale. I'm gonna get one.
My Mate 10 Pro hasn't arrived yet, I'm getting Moka brown color ^^ but for sure Nillkin is good
http://www.nillkin.com/english/proshow.asp?mid=2&sid=0&tid=0&cid=1&scid=&id=7328&page=1
Click to expand...
Click to collapse
Already got mine more than a week ago. Bought off aliexpress.
Unfortunately this time the glass is ever so slightly less than the full width of the phone - my P9 Plus Nillkin glass was edge to edge of the screen. About 0.5mm less than each side of the screen. I suspect this is because the no side bezels makes it hard to extend the glass all the way to the sides otherwise it might be non compatible with cases.
Not too irritating but definitely noticeable. Small halo effect as usual.
But overall the smoothness and the oleophobic coating definitely trumps the factory plastic protector. Still worth the buy.
Sent from my ALP-L29 using Tapatalk
jounin052 said:
Can you post some pictures of the screen protector installed? I'm looking to get a screen protector myself but they are a number of brands I dont know and no reviews for any of them yet.
Click to expand...
Click to collapse
Today i tried KONIX glass protector, (i guess this is just a generic glass, packed into some brand - just like many of screen protector in the market)
Just like any other 2.5D glass protector, it wont be able to cover the screen edge
But it still fit quite well, and the touch response is unaffected, or even better than on plastic (included) one
Glass cut is nicely rounded without sharp edge though, so i think this one is well manufactured
Here's some pics
otonieru said:
Today i tried KONIX glass protector, (i guess this is just a generic glass, packed into some brand - just like many of screen protector in the market)
Just like any other 2.5D glass protector, it wont be able to cover the screen edge
But it still fit quite well, and the touch response is unaffected, or even better than on plastic (included) one
Glass cut is nicely rounded without sharp edge though, so i think this one is well manufactured
Here's some pics
Click to expand...
Click to collapse
Thanks... Wanted to see the one that @Cccmachins has because I ended up ordering the same Ozero TP... Guess I'll have to wait till I get it to see and decide if that works or if I need to keep looking.
The ozero just has a black frame around it so it just hides the edges of the screen completely, so you are actually losing a tad bit of screen real estate. I also bought one on Amazon that does not have the frame like the ozero and the entire edge is lifted up all the way around my screen. I think I'd prefer the plastic ones and just replace them from time to time...
tuffluck said:
The ozero just has a black frame around it so it just hides the edges of the screen completely, so you are actually losing a tad bit of screen real estate. I also bought one on Amazon that does not have the frame like the ozero and the entire edge is lifted up all the way around my screen. I think I'd prefer the plastic ones and just replace them from time to time...
Click to expand...
Click to collapse
That sucks... The tempered glass screen protector manufacturers seem to have a hard time making them fit perfectly on these curve edge phones... It's either to small or not sticking on the edges...
Jevansent said:
Already got mine more than a week ago. Bought off aliexpress.
Unfortunately this time the glass is ever so slightly less than the full width of the phone - my P9 Plus Nillkin glass was edge to edge of the screen. About 0.5mm less than each side of the screen. I suspect this is because the no side bezels makes it hard to extend the glass all the way to the sides otherwise it might be non compatible with cases.
Not too irritating but definitely noticeable. Small halo effect as usual.
But overall the smoothness and the oleophobic coating definitely trumps the factory plastic protector. Still worth the buy.
Click to expand...
Click to collapse
Even the stock screen protector doesnt fully cover the edges. Is the nillkin tg the same or worse than the original SP in covering the side? Do you think the UAG plasma case is compatible with the nillkin tg?
i prefer this protector 9h tempered glass, it cover all the front, very clear also in sunlight, anti fingerprint. i buy it from local market, very satisfied
pictures
scrumptyous said:
What brand did you get and does it cover the whole screen?
Click to expand...
Click to collapse
Hello friend, as a seller, we have talked to countless manufacturers to find the perfect screen protectors for our clients. As now phones screen bigger and bigger, resolution values are higher also. It is so necessary to get a high quality screen protector to protect the high valued smart phones. And the meanwhile, the screen protector cannot affect the touch sensitivity of phone screen , cannot decrease the brightness of the phone screen. So really it is not an easy solution.
Anyhow, we used to struggle which one is better? Tempered glass or hydrogel screen protector? Tempered glass is more thickness to 0.33mm, while hydrogel usually under 0.2mm, tempered glass cannot be full screen protector, while hydrogel can be full screen protector. Which is such a pity tempered glass cannot be full screen. Still except this flaw, other aspects is much much better than hydrogel protector. So we stick to tempered glass screen protector for Huawei Mate 10.
Here is what we prepare for our clients.
Flos®Huawei Mate 10 Transparent Full Protection Tempered Glass Screen Protector HD Anti-Scratch-[2 Pcs]
And we offer express shipping to Europe/USA within 1 week at 2usd shipping fees.
Also we are on Amazon for Europe.
Flosmall.com said:
Hello friend, as a seller, we have talked to countless manufacturers to find the perfect screen protectors for our clients. As now phones screen..........
Click to expand...
Click to collapse
You know,
Sometimes its hard to trust a manufacturer, who despite promise the fine quality of their product, yet still manage to slip a typo on their commercial material,
Your images misspelled "tempered" as "temepred" and it doesn't sound convincing at all for me :silly:
Hi!
I just wanted to know which is, in your opinion, the best tempered glass screen protector for this device. So far I've no luck, I bought a 2.5d one that has airbags on the borders.
Opinions?
jandraht said:
Hi!
I just wanted to know which is, in your opinion, the best tempered glass screen protector for this device. So far I've no luck, I bought a 2.5d one that has airbags on the borders.
Opinions?
Click to expand...
Click to collapse
same problem here with Luanke glass (209626001) from g3arb3st, all around on 1-2cm it was like there was no glue at all, only the center part was sticking correctly.
http://s.click.aliexpress.com/e/qjEuBiE
adrenochrome25 said:
same problem here with Luanke glass (209626001) from g3arb3st, all around on 1-2cm it was like there was no glue at all, only the center part was sticking correctly.
Click to expand...
Click to collapse
This is in fact not the problem with the tempered glass. It is due to the curved glass on redmi 4x which is called as 2.5D glass which will be slightly bent at the edges. When a traditional tempered glass is applied to the screen, as the glass is flat at the center, the tempered glass adheres perfectly, while the ends are bent but the tempered glass is not. This is the reason the tempered glass always leaves air gaps at the edges. I would prefer the old school model plastic screen protector that is available on mi.com for our beloved redmi 4x. Just give it a try and you won't even feel like you have a screen protector on the screen. The only intention in this screen protector is to protect the screen from scratches that are likely to appear due to object playing around in the pockets along with the phone. This screenguard will not protect the screen from drops. You will definitely need to rely on your luck about breaking the glass from waist height of an average height guy.
thanks for your reply
i know about the 2.5D (or rounded edges) of the Redmi4x, but in my case the glass manufacturer circumvented to this problem by making protective glasses slightly smaller than the phone glass like 3mm on each border, so beside the increased difficulty to position it, it should have skipped the edges radius. But even with the 3mm skip i still had non sticky parts. (sku 209626001 from gearbest)
Indeed plastic models should minimise this issue but they are so soft ! After one week in the pocket with scratching things like keys they look so bad that they are already good to be replaced. So except if some technological revolution happened for plastic screen protector since the Mi2/S time, i think i'll live without screen protection at all
yyyoel said:
http://s.click.aliexpress.com/e/qjEuBiE
Click to expand...
Click to collapse
This one is excellent too Im still on my first after 5 monthsand still perfect, and its much cheaper
https://www.aliexpress.com/snapshot/0.html?orderId=87954696635076&productId=32832655061
MadMicro said:
This one is excellent too Im still on my first after 5 monthsand still perfect, and its much cheaper
https://www.aliexpress.com/snapshot/0.html?orderId=87954696635076&productId=32832655061
Click to expand...
Click to collapse
Ok thanks
Im using one of that "hybrid" screen protectors, the center is made of tempered glass and the edges made of some durable material, one claims for carbon fibers, the other for Kevlar. sorry i do not have a link for what i bought, but it looks exactly like the one in that link : https://www.aliexpress.com/item/10pcs-lot-For-Xiaomi-Redmi-4X-3D-Carbon-Fiber-Screen-Film-Anti-Scratch-Tempered-Glass-Screen/32821140687.html?spm=2114.search0104.3.29.uQibKQ&ws_ab_test=searchweb0_0,searchweb201602_4_10152_10151_10065_10344_10068_10345_10342_51102_10343_10340_10341_10609_10541_10084_10083_10307_10312_10313_10059_10314_10534_100031_10604_10103_10605_10594_10107_10142,searchweb201603_12,ppcSwitch_5&algo_expid=72b8e48c-88c1-4470-9f38-f193a555b5e0-4&algo_pvid=72b8e48c-88c1-4470-9f38-f193a555b5e0&rmStoreLevelAB=5
it comes with colored edges, gold, black and white so you can use black or gold on white phone and vice versa. because the edges made of flex material, it sits perfect on the screen and have a nice curve edges all round. my have 98% coverage of the original screen, there is a 0.2 mm of gap between the two. in use on my device for about two month's now, having two falls on asphalt from about 70 cm, right on the corner, nothing happens yet. no scratches yet, as i say, i don't have a link for what i bought, i remember it was an unknown Chinese brand. hope it helps.
Why are all of the links aliexpress? (i don't have a problem with it just i prefer ebay/amazon)
DeblaGaming said:
Why are all of the links aliexpress? (i don't have a problem with it just i prefer ebay/amazon)
Click to expand...
Click to collapse
Isn't it the cheapest that way? Just thinking.
Also, about topic - what do You think about 3mk 3D flexible glass for RN4X? Is it worth it? I would love to get as much protection as possible since I basically drowned my previous phone (UMI C Note) in worktime when I was washing 1 cubic meter containers with the pressure cleaner. Phone was in my pocket all the time, but just small stream of water on fingerprint scanner (inb4 you are a dumbass) ruined everyting.
Nanoedge Full Cover Screen Protector for xiaomi redmi 4x Gold Protective Layer Clear Use Layer TPU Screen Protective Film
https://www.aliexpress.com/item/Nan...260.html?spm=a2g0s.13010208.99999999.6.nfIiZj
buczek0711 said:
Isn't it the cheapest that way? Just thinking.
Also, about topic - what do You think about 3mk 3D flexible glass for RN4X? Is it worth it? I would love to get as much protection as possible since I basically drowned my previous phone (UMI C Note) in worktime when I was washing 1 cubic meter containers with the pressure cleaner. Phone was in my pocket all the time, but just small stream of water on fingerprint scanner (inb4 you are a dumbass) ruined everyting.
Click to expand...
Click to collapse
Hi buczek,
have you tried the mentioned above FlexibleGlass? What are your thoughts on it?
there are much different quality of tempered glass in the market. some of tempered glass screen protector is with poor adhesive glue, it's easy to come off. some tempered glass screen protector is easy to be broken. our company supply high quality tempered glass screen protector, it's with high adhesive A/B glue, up to 9H hardness tempered glass material, anti scratch and anti shatter, protect your screen effectively.
more info: weaccessory dot com
Shenzhen Western Electronic Co., ltd
Here in New Delhi I am able to get a variety of glass based screen protectors costing between ₹15-₹50 per piece. Yes they aren't as effective as those super costly ₹800 one 's but still are very good. It's just that they don't come in any fancy packaging and cleansing wipes
use nano glass,its good fit
Can anyone recommend a tempered glass that has not an insane amount of reflection effect? I bought one from a seller on Ali and it is just like a mirror, making it more annoying to use and harder to see in the sun. ali or ebay
tangoviking said:
Can anyone recommend a tempered glass that has not an insane amount of reflection effect? I bought one from a seller on Ali and it is just like a mirror, making it more annoying to use and harder to see in the sun. ali or ebay
Click to expand...
Click to collapse
Seconded.
The same happened to me. Also it gets dirty very easily and make the screen significantly darker.
I use these. They fit perfectly.
https://www.aliexpress.com/item/2pc...tector-film-full-cover-black/32809037642.html
There's no quality screen protectors made from glass available for this model. I already spent like 50$ on them and none of them lasted long and all of them was defective in one or other way. The first one I bought (from Mocolo) with colored edges did come off on it's own after about a week of very light use. Do yourself a favor and listen to my advice... Buy some plastic screen film instead of this cheap crap and save yourself a lot of nerves and money.