hello,
i will buy soon Xiaomi note 4x (32gb)
and i looking about good cover (be storng and durable, something like otterbox for lg or beter)
and good glass screen protector.
Budget: until 35$ for screen and until 35$ for cover.
pefer those who have registered mail in shipping.
thanks
tsahitsahi said:
hello,
i will buy soon Xiaomi note 4x (32gb)
and i looking about good cover (be storng and durable, something like otterbox for lg or beter)
and good glass screen protector.
Budget: until 35$ for screen and until 35$ for cover.
pefer those who have registered mail in shipping.
thanks
Click to expand...
Click to collapse
I've not found a "perfect" screen cover yet for the phone. I like the 2.5d screen but it makes finding a "perfect" tempered glass solution a problem. I have a full screen protector one on now and it's okay. I haven't found one of those that have adhesive on the entire back panel of the glass. The adhesive is only around the edges on the painted surfaces.
I have another one I haven't tried yet. It looks like it has adhesive on the entire back surface and the outer edges are made of carbon fiber (supposed to be anyway) The outer edges are at least a soft material that supposed to stick to the entire edge and curve around so that it fits a 2.5d screen better. The problem with the ones I bought is that you can't see the backlight from the buttons on the bottom of the phone. Not a deal breaker but a flaw in the design.
Do some searches on aliexpress or someplace and you'll see. Search for redmi note 4x carbon fiber to see the second one I mentioned and redmi note 4x tempered glass for the full screen ones I also mentioned. There are clear non full screen ones that don't go to the edges of the glass. I haven't purchased one of those and probably won't.
It's really hard to find something decent. I personally prefer the traditional tempered glass screen protectors, but I've tried three now and they all look terrible, huge white marks on the sides even though the tempered glass doesn't cover the full screen. The full coverage one lost its adhesive due to my case pushing up against it, and it looks awful with weird adhesive marks in the middle. Honestly I'm contemplating going back to a film screen protector because I just can't find a tempered glass screen protector that will work for me. Also worth noting that I have a friend with a White Redmi Note 4x and I was able to transplant my screen protector onto this device with zero issues, so it's as if the black variant has glass that is more curved than normal
stephendt0 said:
It's really hard to find something decent. I personally prefer the traditional tempered glass screen protectors, but I've tried three now and they all look terrible, huge white marks on the sides even though the tempered glass doesn't cover the full screen. The full coverage one lost its adhesive due to my case pushing up against it, and it looks awful with weird adhesive marks in the middle. Honestly I'm contemplating going back to a film screen protector because I just can't find a tempered glass screen protector that will work for me. Also worth noting that I have a friend with a White Redmi Note 4x and I was able to transplant my screen protector onto this device with zero issues, so it's as if the black variant has glass that is more curved than normal
Click to expand...
Click to collapse
I applied my tempered glass with my case on the phone. It's one of the full screen protectors with the painted frame around the outside. I think they do that to hide the fact that the glass doesn't fit to the curve. It looks good but I know it's not a perfect fit.
Upon research there appears to be fluid you can apply to the edges to get a perfect seal to remove the halo effect... I will investigate further
With my new case I posted about the full screen tempered glass looks perfect except for the fact they don't put adhesive on the entire back panel. Just under the painted area.
prisoner1969 said:
With my new case I posted about the full screen tempered glass looks perfect except for the fact they don't put adhesive on the entire back panel. Just under the painted area.
Click to expand...
Click to collapse
Yes... in my experience this doesn't last. I had two lift up and get dust underneath and then it was horrible after that. Also I got the weird rainbow effect in the middle of the glass and the keys at the bottom didn't line up exactly.
tsahitsahi said:
hello,
i will buy soon Xiaomi note 4x (32gb)
and i looking about good cover (be storng and durable, something like otterbox for lg or beter)
and good glass screen protector.
Budget: until 35$ for screen and until 35$ for cover.
pefer those who have registered mail in shipping.
thanks
Click to expand...
Click to collapse
Buy from glazedinc.com
It's a perfect fit and it costs ₹400, they also provide cash on delivery in India.
Sent from my Moto G (4) using Tapatalk
I stay in Hyderabad India and on the name of tempered glasses they are just selling cheap flimsy transparent fiber or thin glass kind of material which is easily broken they are not actually tempered though the cover has a picture of hammer but they are not tempered glass.
Atharkhan101 said:
I stay in Hyderabad India and on the name of tempered glasses they are just selling cheap flimsy transparent fiber or thin glass kind of material which is easily broken they are not actually tempered though the cover has a picture of hammer but they are not tempered glass.
Click to expand...
Click to collapse
As no hard material can cover a curved glass manufacturers need to make a hybrid glass. What I have done is bought a edge to edge glass from glazedinc.com and a tpu case from local market, edge to edge glass protects my display from scratches without compromising the looks and tpu case protects my device from falls. It's the nearest to perfect solution one can do for the note 4
Sent from my Redmi Note 4 using Tapatalk
pooniaprashant said:
As no hard material can cover a curved glass manufacturers need to make a hybrid glass. What I have done is bought a edge to edge glass from glazedinc.com and a tpu case from local market, edge to edge glass protects my display from scratches without compromising the looks and tpu case protects my device from falls. It's the nearest to perfect solution one can do for the note 4
Sent from my Redmi Note 4 using Tapatalk
Click to expand...
Click to collapse
Good to hear I too bought the edge to edge tempered glass which is still flimsy but still can protect the screen without compromising the looks however I'm looking forward to purchase hard kickstand case which can protect the device when it falls. Kindly give me the link of that TPU case you bought and please tell me if it is hard enough to protect the phone. Thanks in advance.
Atharkhan101 said:
Good to hear I too bought the edge to edge tempered glass which is still flimsy but still can protect the screen without compromising the looks however I'm looking forward to purchase hard kickstand case which can protect the device when it falls. Kindly give me the link of that TPU case you bought and please tell me if it is hard enough to protect the phone. Thanks in advance.
Click to expand...
Click to collapse
tpu case was bought from local market (for about ₹150), if you are asking for tempered glass then just goto glazedinc.com
Related
It seems that all currently available on AliExpress (at least) tempered glass protection are flawed, because of:
1- Protectors that covers the body in full, and has some black areas: has actually glue only on the black non-transparent zones, but nothing on display area it self (so only display ages, upper and lower parts has glue), this makes it rubbish, because it will not stick well to the screen, one or two gaming sessions and it will end in recycle bin.
2- Fully transparent one, with full screen coverage: because 1+5 has 2.5D screen, those covers will not stick well on phone edges since tempered glass is rigid, this maybe can be used only with covers that overlap edges of the screen also.
3-Fully transparent one that don't cover all of the screen: those usually stick well, but only if they left about 5mm on each edge uncovered! I believe it is clear that such a gap ruins the protective purpose of the tempered glass, aside the ugly look due to gaps. (Again, having an edge overlapping cover could make it look better)
So it seems the only practical option for now is to use usual non glass protection unfortunately.
If I missed something or you have some suggestions please let me know..Some manufacturers claims that there protector is 4D, what means that it should solve all above issues, i didn't try those yet, anybody tested them?
I am regretting removing original 1+5 protection
As I bought and still use an Orzly tempered glass protector I concur with your analysis at this time. When I first applied the Orzly is was perfect without the issues some experienced but after 3+ weeks the sides must have lifted slightly due to my bumper case and dust particles got underneath next to the left/right buttons. Since then I've been religiously looking for an alternate that passes the case test but none so far have come to light.
I like the feel of the tempered glass so much that I've resisting going back to the film/plastic alternatives which I had always used in the past. I'm even considering going naked on the screen, relying on Gorilla Glass 5, but continue with a bumper case. Or the reverse, by using an Orzly but with no bumper case as I already have a dBrand skin applied. None of those options seem all that appealing. The one protector that seems to work with a 2.5D screen is the Galaxy 8's Whitestone Dome Glass but it's a crazy expensive $41USD and difficult to apply. I'm not sure even if a OnePlus 5 version was available I'd spend that much money.
I haven't had any luck with any tempered glass., due to point 2 which has been raised:
2- Fully transparent one, with full screen coverage: because 1+5 has 2.5D screen, those covers will not stick well on phone edges since tempered glass is rigid, this maybe can be used only with covers that overlap edges of the screen also.
Click to expand...
Click to collapse
After reading all of the reviews I decided just to leave the plastic one on until someone gets their act together and offers a proper tgsp for the OP5
Sent from my OnePlus5 using XDA Labs
Agreed with OP and all of above. I had and still have the Orzly TG protector on, but dust underneath. I want to go back to the usual plastic ones, but don't know which one covers as well/much as the original one that came with the phone. Any recommendations?
Sent from my ONEPLUS A5000 using Tapatalk
Im still waiting for my Nilkin glass protector to arrive (it's almost been a month, sigh)
If this one has the same issue as the ones I've tried before it (lack of adhesive around the edges), I'm going to try and go back to using plastic screen protectors.
I don't want to use my device without one, but I also hate how these glass protectors don't fully adhere to the screen around the sides (including top and bottom)
Biuzko tempered glass screen protector from Amazon had been working perfectly for me for many weeks.
Megaflop666 said:
Biuzko tempered glass screen protector from Amazon had been working perfectly for me for many weeks.
Click to expand...
Click to collapse
Can anybody confirm this?
on yt you have a channel big ubox and there one guy test a lot of tempered glasses and cover for OP5 also the Biuzko one.
graja84 said:
on yt you have a channel big ubox and there one guy test a lot of tempered glasses and cover for OP5 also the Biuzko one.
Click to expand...
Click to collapse
The YouTube channel you mention is also my favorite choice for screen protector info for the Oneplus 5. He always tests the protectors with various cases. His branding of the channel can get annoying but his market coverage is excellent and vast. With the plethora of tempered screen protectors its your choice for an accompanying case that often makes a big difference in your satisfaction. Here is the Big unBox - Biuzko review.
One thing I noticed is when the Big unBox applied the Official OnePlus 5 tgsp video it had lots of bubbles on the edges that he said couldn't be removed while I watched XDA's TK review and his application looked perfect with TK giving it a thumbs up. In the comment section of that review TK said all was well even after a month of usage. I was surprised as the Official tgsp has garnered horrible reviews and comments in the XDA Oneplus 5 accessories section. The most consistent criticism of the Official tgsp is that it cuts off a tiny fraction of the screen. In fact, so far my research indicates all of the "Full Adhesive", "Full coverage" tgsp cut off part of the screen. Personally I think the reason they have a black line on the edges is to hide inevitable bubbles due to the curved edge. The thicker the tempered glass the wider the side black stripes (e.g. Orzly versus Official).
Here is the criteria I'm using in selecting a replacement for my Orzly tgsp and cheap bumper case. Note that I've already installed a dBrand skin so that skews my criteria somewhat.
Tempered Glass screen protector:
- Must have full adhesive (not just top/bottom and side adhesion) and full coverage
- Would prefer, but am a tiny bit flexible on, part of the screen being cut off (limit is that not one pixel of the notification bar's clock is trimmed)
- Must have an oleophobic coating
Case:
- Needs to be as non intrusive as possible adding grip but not greatly ruining the sleekness of the phone
- Uses a minimalist design and/or clear materials so as not to obstruct viewing of the dBrand skin I've installed
- With the case on the buttons (power and volume rocker) must not be difficult to press
So far my research has me leaning towards the Official OnePlus 5 or Biuzko tgsp with a Rhinoshield Crashguard case. My one issue is that the Rhinoshield reviews always mention how difficult the volume rocker buttons are to press. Here is the video that has me leaning in that direction as is seems to best address my criteria
OnePlus 5 best case/protector setup
I'll being doing more reading and searching today hoping to find the unicorn of tgsp/case combinations. The dust under my Orzly is driving me mad but the feel and responsiveness of its surface has me rejecting a film/plastic protector alternative.
I'm using the Biuzko as well with the Tudia MERGE case no problems.
The trick is to first put OP5 in the case, THEN place the screen protector on. It fits perfectly, and you can't mess up the alignment since it falls right in. Then I just try to put pressure on the sticky parts for a few minutes.
I've had no problems for 3 weeks now.
I installed mine the same way, but I'm using the op5 carbon fiber case.
Sent from my ONEPLUS A5000 using Tapatalk
The original plastic cover was just perfect, is there is any possibility to find an équivalence ?
There's only tempered glasses on internet
akhage said:
The original plastic cover was just perfect, is there is any possibility to find an équivalence ?
There's only tempered glasses on internet
Click to expand...
Click to collapse
Hello,
I recommend you the plastic screen protectors from GadgetShieldz. I made a review about it on another post on xda but to summarize, it's a bit difficult to apply but then it's great. The screen looks good and it's cheap ^^ highly recommend.
FYI, I was struggling with TGSP for the OP5 and I just gave up. There is no good alternative atm.
TMSxXDA said:
It seems that all currently available on AliExpress (at least) tempered glass protection are flawed, because of:
1- Protectors that covers the body in full, and has some black areas: has actually glue only on the black non-transparent zones, but nothing on display area it self (so only display ages, upper and lower parts has glue), this makes it rubbish, because it will not stick well to the screen, one or two gaming sessions and it will end in recycle bin.
2- Fully transparent one, with full screen coverage: because 1+5 has 2.5D screen, those covers will not stick well on phone edges since tempered glass is rigid, this maybe can be used only with covers that overlap edges of the screen also.
3-Fully transparent one that don't cover all of the screen: those usually stick well, but only if they left about 5mm on each edge uncovered! I believe it is clear that such a gap ruins the protective purpose of the tempered glass, aside the ugly look due to gaps. (Again, having an edge overlapping cover could make it look better)
So it seems the only practical option for now is to use usual non glass protection unfortunately.
If I missed something or you have some suggestions please let me know..Some manufacturers claims that there protector is 4D, what means that it should solve all above issues, i didn't try those yet, anybody tested them?
I am regretting removing original 1+5 protection
Click to expand...
Click to collapse
Thanks for this, I recently just applied it and noticed all the issues you raised.
akhage said:
The original plastic cover was just perfect, is there is any possibility to find an équivalence ?
There's only tempered glasses on internet
Click to expand...
Click to collapse
Skinomi makes a wet application protector in both clear and matte. I posted pics of the matte version here. Since that post, I've experienced no scratches or orange peel effect. It's also great for no fingerprints.
You can always get the Nillkin H+ Pro, but only if you are using a spigen case or otterbox. Right now I am using the Spigen Rugged Armor with Nillkin H+ Pro and the gap between the glass and the case is around 1 mm (i would say 1.5 mm if I have to be more accurate). The Otterbox case is even better but I find it too bulky, tried it once for an hour and I did not enjoy it, but some of you may like it.
Few words about the Nillkin H+ Pro.
I know there are few variants of the Nillkin glass and I have tried all of them in the past. In my opinion the best glass is exactly the H+ Pro even tho it is a 1 dollar more expensive. The glass has zero rainbow effect or halo effect, it is 99 to 100% clear. It has amazing orleophobic coating. My Honor 8 has the same glass for 6 months now and it is flawless. I am going to change my nillkin glass with the official 3D tempered glass but only because I received the rhinoshield bumper. Otherwise I would not change my nillkin. You are going to get used to the small gap in a week or so.
Don't leave the phone without a glass.
I just applied mine, best screen protector I ever had, pure quality. Quote me on that
I love the official OnePlus screen protector, it's premium & looks good. Who ever made this thread is straight up wrong. The one he recommended is no Bueno, the glass part doesn't have enhesive. Look I am a OnePlus 5 conisuer, the screen protector is fantastic ?
I have siegen case. Can I buy the original screen protector from oneplus store with no problems? Or can I suggest me something with dust proof and oil proof ?
Has anyone found one that works yet ? I hear Whitestone dome is a no go.
Thanks
LT1UltraZ said:
Has anyone found one that works yet ? I hear Whitestone dome is a no go.
Thanks
Click to expand...
Click to collapse
I'm using a case friendly skinomi HD clear. the matte fits as well but I didn't like it.
Sent from my SM-N950U using Tapatalk
I got a zagg one from best buy. Expensive but zero problems since it's been on. The very edges have adhesive that is visible on the curved sides making a slight line. Not a deal breaker but it is there. No halo effect like I had on the note 5 protectors either. Expensive but I'm very happy so far.
Tech armor glass does.
The defender series for the note 8 works with the whitestone dome glass...
ange.mariie said:
The defender series for the note 8 works with the whitestone dome glass...
Click to expand...
Click to collapse
Any proof you could share by chance
I use the Zagg InvisibleShield HD
The edges don't stay down the best, but it works well with the Otterbox Defender case.
faded03cobra said:
Tech armor glass does.
Click to expand...
Click to collapse
Do you have a picture with the case on? I have the defender also and looking for a tempered glass
The problem you will find with most glass protectors is they typically only have adhesive around the edges. This means there is a gap between the protector and the screen and this decreases sensitivity. I'd look for a new case that works with Dome Glass. Cases are a dime a dozen but glass protectors with full adhesive are very limited. I typically buy UAG cases but only the Monarch UAG works with the Dome Glass. There are 3 YouTube videos that go through compatible cases for Dome Glass.
AlexanderBlaQ said:
Any proof you could share by chance
Click to expand...
Click to collapse
Sure, the case comparability test by mobile fun on YouTube. My case is yet to arrive, as soon as it does I'll put up pictures.
ange.mariie said:
Sure, the case comparability test by mobile fun on YouTube. My case is yet to arrive, as soon as it does I'll put up pictures.
Click to expand...
Click to collapse
Thanks I'll have to check that out
Otterbox has the Alpha Glass out already.. Was going to get a defender + alpha glass if I didnt already have a UAG plasma
Dont waste your money
ALPHA GLASS FOR NOTE 8 This is the WORST designed screen protector. It causes a major loss in screen sensitivity, to the point of having to tap screen several times, and press down with a good deal of pressure to get the screen to respond. There is a large gap at both top and bottom of screen. Adhesive is CLEARLY visable on all borders of the protector. I am extremely disappointed in the design of this! I have used alpha glass protectors before on my Samsung galaxy s8+ and was looking forward to the release of this one. I will be telling everyone i know to steer clear of this product! DO NOT WASTE YOUR MONEY~ YOU MIGHT AS WELL FLUSH IT DOWN THE TOILET~ I am a faithful customer of Otterbox, I love their cases, but this screen protector does not live to otterbox brand. I will stay a customer with their cases, but I will NEVER again purchase an alpha glass!
Otterbox defender & whitestone dome match made in heaven
So I just finished installing my whitestone dome glass protector, what a great system, 1st one failed cos of my error but second time worked sweet as. All cured and sitting pretty, absolutely no touch screen lag very responsive and very nice to use, wouldn't even know there was anything on the screen.
My case of choice is the otter box defender, I'm hard on my phones and with the note 8 almost costing a mortgage deposit, I want it well protected. Both the whitestone and the defender case appears to be made for each other, the edge of the protector sits almost flush with the top part of the case = perfect fit. No lifting no nothing. It's amazing to say the least..
The corners are actually protected by the corners of the case and it's like the case holds the glass even more secure, again no lifting or anything.
Hope this helps some of you out. I'm happy to supply pictures if any of you guys need.
Happy protecting everyone..
ange.mariie said:
So I just finished installing my whitestone dome glass protector, what a great system, 1st one failed cos of my error but second time worked sweet as. All cured and sitting pretty, absolutely no touch screen lag very responsive and very nice to use, wouldn't even know there was anything on the screen.
My case of choice is the otter box defender, I'm hard on my phones and with the note 8 almost costing a mortgage deposit, I want it well protected. Both the whitestone and the defender case appears to be made for each other, the edge of the protector sits almost flush with the top part of the case = perfect fit. No lifting no nothing. It's amazing to say the least..
The corners are actually protected by the corners of the case and it's like the case holds the glass even more secure, again no lifting or anything.
Hope this helps some of you out. I'm happy to supply pictures if any of you guys need.
Happy protecting everyone..
Click to expand...
Click to collapse
Could you keep us updated on your experience with this? A lot of other people have concluded that if the case is in contact with the screen protector, it will start lifting at some point.
I was using tempered glass screen guard on my Note 8. However I dropped the phone twice from a height of about 2/2.5 feet and the screen guard cracked. I am now using Samsung original clear view case for Note 8. Should I use glass screen guard with the clear view case?
kdatale said:
I was using tempered glass screen guard on my Note 8. However I dropped the phone twice from a height of about 2/2.5 feet and the screen guard cracked. I am now using Samsung original clear view case for Note 8. Should I use glass screen guard with the clear view case?
Click to expand...
Click to collapse
The screen protector is supposed to crack so your phone screen doesn't. My advise, if you like your note 8 put a screen on it! ?
Cut out your defender inner plastic
I've already wasted one expensive tempered glass (Araree tempered glass made in Korea, $29.99 + $8 international shipping to US).
When I used this expensive protector, there was some portion overlapped with Depender's inner plastic. Actually it made the tempered glass broken in the edge side.
So, what you can do is, using the sharp nife cut out Defender's plastic edge side where it contacts with glass screen protector. If you do this carefully, it won't look ugly. Or you can use the sand paper to remove some edge portion of plastic.
This Araree tempered glass (full cover) works great with Spigen neo hyprid case. No lift nor sensitivity loss.
I also found that Otterbox defender case works with Sammy's faster charger if we put the phone in the exact middle of the charger and with the charger plate is in plat position. But if we try to charge the phone with the charge plate is in vertical position, there was no way to charge the phone...
Wish I could have read this before I tried the UAG Prism case with the Best Buy installed Zagg glass protector. Cracked the upper left edge of the protector. I have an Otterbox Defender on and it's good. Unfortunately, right from the initial screen protector install, there was separation and touch sensitivity issues. Heading to Best Buy to have them put on another screen protector.
Mike02z said:
The problem you will find with most glass protectors is they typically only have adhesive around the edges. This means there is a gap between the protector and the screen and this decreases sensitivity. I'd look for a new case that works with Dome Glass. Cases are a dime a dozen but glass protectors with full adhesive are very limited. I typically buy UAG cases but only the Monarch UAG works with the Dome Glass. There are 3 YouTube videos that go through compatible cases for Dome Glass.
Click to expand...
Click to collapse
What screen protector will work with the otterbox defender for the Note 8?
I've been thinking of getting something to protect my precious and the original plastic one has lots of scratches on it.
so Tempered glass or Hydrogel film?
I've been doing research on this question too. It's like a mixed reviews. But a commonly seen answer is that they regret getting the hydro gel version and stick to the conventional tempered glass as some buyers indicated after a few days, the edge came off peeling and trapping dust while some others has high static attracting dust and easily scratch.
I usually prefer Tempered glass.
Always glass, clarity and feel always superior to film.
A good brand would be Nillkin - I buy this off Ali express. The oleophobic coating is great and you can actually feel the smoothness difference vs a $2 cheapo glass protector.
http://s.aliexpress.com/rQje6z6R
I have bought it for multiple previous devices and am waiting for my Mate 10 glass delivery.
It is fragile though, have to be careful not to place it on the table face down with any sand or grit, it can scratch. Usually I have a case with a bit of a lip to protect it.
Obviously it can crack if you drop it also.
Sent from my ALP-L29 using Tapatalk
Anyone found a tempered glass protector that actually does not lift on the sides? Such a pity if one uses a glass that doesn't cover the whole display.. =(
Changed mine over to 9h yesterday. Just feels so much better than the plastic film.
Cccmachins said:
Changed mine over to 9h yesterday. Just feels so much better than the plastic film.
Click to expand...
Click to collapse
What brand did you get and does it cover the whole screen?
Ozero 2 pack from Amazon. Not a bad glass. No rainbow on the screen just a little thick. Like someone else said it makes you feel like your pressing into a hole with the thicker glass. They should taper the protector around the navigation button to make it feel better. Yeah covers all the screen. Except the bottom of the navigation button.
Pictures
Cccmachins said:
Ozero 2 pack from Amazon. Not a bad glass. No rainbow on the screen just a little thick. Like someone else said it makes you feel like your pressing into a hole with the thicker glass. They should taper the protector around the navigation button to make it feel better. Yeah covers all the screen. Except the bottom of the navigation button.
Click to expand...
Click to collapse
Can you post some pictures of the screen protector installed? I'm looking to get a screen protector myself but they are a number of brands I dont know and no reviews for any of them yet.
Jevansent said:
Always glass, clarity and feel always superior to film.
A good brand would be Nillkin - I buy this off Ali express. The oleophobic coating is great and you can actually feel the smoothness difference vs a $2 cheapo glass protector.
http://s.aliexpress.com/rQje6z6R
I have bought it for multiple previous devices and am waiting for my Mate 10 glass delivery.
It is fragile though, have to be careful not to place it on the table face down with any sand or grit, it can scratch. Usually I have a case with a bit of a lip to protect it.
Obviously it can crack if you drop it also.
Sent from my ALP-L29 using Tapatalk
Click to expand...
Click to collapse
Hi !
I agree with you. I've talked to the seller and the their Mate 10 Pro Amazing H+ should go on sale. I'm gonna get one.
My Mate 10 Pro hasn't arrived yet, I'm getting Moka brown color ^^ but for sure Nillkin is good
http://www.nillkin.com/english/proshow.asp?mid=2&sid=0&tid=0&cid=1&scid=&id=7328&page=1
Darktitor said:
Hi !
I agree with you. I've talked to the seller and the their Mate 10 Pro Amazing H+ should go on sale. I'm gonna get one.
My Mate 10 Pro hasn't arrived yet, I'm getting Moka brown color ^^ but for sure Nillkin is good
http://www.nillkin.com/english/proshow.asp?mid=2&sid=0&tid=0&cid=1&scid=&id=7328&page=1
Click to expand...
Click to collapse
Already got mine more than a week ago. Bought off aliexpress.
Unfortunately this time the glass is ever so slightly less than the full width of the phone - my P9 Plus Nillkin glass was edge to edge of the screen. About 0.5mm less than each side of the screen. I suspect this is because the no side bezels makes it hard to extend the glass all the way to the sides otherwise it might be non compatible with cases.
Not too irritating but definitely noticeable. Small halo effect as usual.
But overall the smoothness and the oleophobic coating definitely trumps the factory plastic protector. Still worth the buy.
Sent from my ALP-L29 using Tapatalk
jounin052 said:
Can you post some pictures of the screen protector installed? I'm looking to get a screen protector myself but they are a number of brands I dont know and no reviews for any of them yet.
Click to expand...
Click to collapse
Today i tried KONIX glass protector, (i guess this is just a generic glass, packed into some brand - just like many of screen protector in the market)
Just like any other 2.5D glass protector, it wont be able to cover the screen edge
But it still fit quite well, and the touch response is unaffected, or even better than on plastic (included) one
Glass cut is nicely rounded without sharp edge though, so i think this one is well manufactured
Here's some pics
otonieru said:
Today i tried KONIX glass protector, (i guess this is just a generic glass, packed into some brand - just like many of screen protector in the market)
Just like any other 2.5D glass protector, it wont be able to cover the screen edge
But it still fit quite well, and the touch response is unaffected, or even better than on plastic (included) one
Glass cut is nicely rounded without sharp edge though, so i think this one is well manufactured
Here's some pics
Click to expand...
Click to collapse
Thanks... Wanted to see the one that @Cccmachins has because I ended up ordering the same Ozero TP... Guess I'll have to wait till I get it to see and decide if that works or if I need to keep looking.
The ozero just has a black frame around it so it just hides the edges of the screen completely, so you are actually losing a tad bit of screen real estate. I also bought one on Amazon that does not have the frame like the ozero and the entire edge is lifted up all the way around my screen. I think I'd prefer the plastic ones and just replace them from time to time...
tuffluck said:
The ozero just has a black frame around it so it just hides the edges of the screen completely, so you are actually losing a tad bit of screen real estate. I also bought one on Amazon that does not have the frame like the ozero and the entire edge is lifted up all the way around my screen. I think I'd prefer the plastic ones and just replace them from time to time...
Click to expand...
Click to collapse
That sucks... The tempered glass screen protector manufacturers seem to have a hard time making them fit perfectly on these curve edge phones... It's either to small or not sticking on the edges...
Jevansent said:
Already got mine more than a week ago. Bought off aliexpress.
Unfortunately this time the glass is ever so slightly less than the full width of the phone - my P9 Plus Nillkin glass was edge to edge of the screen. About 0.5mm less than each side of the screen. I suspect this is because the no side bezels makes it hard to extend the glass all the way to the sides otherwise it might be non compatible with cases.
Not too irritating but definitely noticeable. Small halo effect as usual.
But overall the smoothness and the oleophobic coating definitely trumps the factory plastic protector. Still worth the buy.
Click to expand...
Click to collapse
Even the stock screen protector doesnt fully cover the edges. Is the nillkin tg the same or worse than the original SP in covering the side? Do you think the UAG plasma case is compatible with the nillkin tg?
i prefer this protector 9h tempered glass, it cover all the front, very clear also in sunlight, anti fingerprint. i buy it from local market, very satisfied
pictures
scrumptyous said:
What brand did you get and does it cover the whole screen?
Click to expand...
Click to collapse
Hello friend, as a seller, we have talked to countless manufacturers to find the perfect screen protectors for our clients. As now phones screen bigger and bigger, resolution values are higher also. It is so necessary to get a high quality screen protector to protect the high valued smart phones. And the meanwhile, the screen protector cannot affect the touch sensitivity of phone screen , cannot decrease the brightness of the phone screen. So really it is not an easy solution.
Anyhow, we used to struggle which one is better? Tempered glass or hydrogel screen protector? Tempered glass is more thickness to 0.33mm, while hydrogel usually under 0.2mm, tempered glass cannot be full screen protector, while hydrogel can be full screen protector. Which is such a pity tempered glass cannot be full screen. Still except this flaw, other aspects is much much better than hydrogel protector. So we stick to tempered glass screen protector for Huawei Mate 10.
Here is what we prepare for our clients.
Flos®Huawei Mate 10 Transparent Full Protection Tempered Glass Screen Protector HD Anti-Scratch-[2 Pcs]
And we offer express shipping to Europe/USA within 1 week at 2usd shipping fees.
Also we are on Amazon for Europe.
Flosmall.com said:
Hello friend, as a seller, we have talked to countless manufacturers to find the perfect screen protectors for our clients. As now phones screen..........
Click to expand...
Click to collapse
You know,
Sometimes its hard to trust a manufacturer, who despite promise the fine quality of their product, yet still manage to slip a typo on their commercial material,
Your images misspelled "tempered" as "temepred" and it doesn't sound convincing at all for me :silly:
Hi!
I just wanted to know which is, in your opinion, the best tempered glass screen protector for this device. So far I've no luck, I bought a 2.5d one that has airbags on the borders.
Opinions?
jandraht said:
Hi!
I just wanted to know which is, in your opinion, the best tempered glass screen protector for this device. So far I've no luck, I bought a 2.5d one that has airbags on the borders.
Opinions?
Click to expand...
Click to collapse
same problem here with Luanke glass (209626001) from g3arb3st, all around on 1-2cm it was like there was no glue at all, only the center part was sticking correctly.
http://s.click.aliexpress.com/e/qjEuBiE
adrenochrome25 said:
same problem here with Luanke glass (209626001) from g3arb3st, all around on 1-2cm it was like there was no glue at all, only the center part was sticking correctly.
Click to expand...
Click to collapse
This is in fact not the problem with the tempered glass. It is due to the curved glass on redmi 4x which is called as 2.5D glass which will be slightly bent at the edges. When a traditional tempered glass is applied to the screen, as the glass is flat at the center, the tempered glass adheres perfectly, while the ends are bent but the tempered glass is not. This is the reason the tempered glass always leaves air gaps at the edges. I would prefer the old school model plastic screen protector that is available on mi.com for our beloved redmi 4x. Just give it a try and you won't even feel like you have a screen protector on the screen. The only intention in this screen protector is to protect the screen from scratches that are likely to appear due to object playing around in the pockets along with the phone. This screenguard will not protect the screen from drops. You will definitely need to rely on your luck about breaking the glass from waist height of an average height guy.
thanks for your reply
i know about the 2.5D (or rounded edges) of the Redmi4x, but in my case the glass manufacturer circumvented to this problem by making protective glasses slightly smaller than the phone glass like 3mm on each border, so beside the increased difficulty to position it, it should have skipped the edges radius. But even with the 3mm skip i still had non sticky parts. (sku 209626001 from gearbest)
Indeed plastic models should minimise this issue but they are so soft ! After one week in the pocket with scratching things like keys they look so bad that they are already good to be replaced. So except if some technological revolution happened for plastic screen protector since the Mi2/S time, i think i'll live without screen protection at all
yyyoel said:
http://s.click.aliexpress.com/e/qjEuBiE
Click to expand...
Click to collapse
This one is excellent too Im still on my first after 5 monthsand still perfect, and its much cheaper
https://www.aliexpress.com/snapshot/0.html?orderId=87954696635076&productId=32832655061
MadMicro said:
This one is excellent too Im still on my first after 5 monthsand still perfect, and its much cheaper
https://www.aliexpress.com/snapshot/0.html?orderId=87954696635076&productId=32832655061
Click to expand...
Click to collapse
Ok thanks
Im using one of that "hybrid" screen protectors, the center is made of tempered glass and the edges made of some durable material, one claims for carbon fibers, the other for Kevlar. sorry i do not have a link for what i bought, but it looks exactly like the one in that link : https://www.aliexpress.com/item/10pcs-lot-For-Xiaomi-Redmi-4X-3D-Carbon-Fiber-Screen-Film-Anti-Scratch-Tempered-Glass-Screen/32821140687.html?spm=2114.search0104.3.29.uQibKQ&ws_ab_test=searchweb0_0,searchweb201602_4_10152_10151_10065_10344_10068_10345_10342_51102_10343_10340_10341_10609_10541_10084_10083_10307_10312_10313_10059_10314_10534_100031_10604_10103_10605_10594_10107_10142,searchweb201603_12,ppcSwitch_5&algo_expid=72b8e48c-88c1-4470-9f38-f193a555b5e0-4&algo_pvid=72b8e48c-88c1-4470-9f38-f193a555b5e0&rmStoreLevelAB=5
it comes with colored edges, gold, black and white so you can use black or gold on white phone and vice versa. because the edges made of flex material, it sits perfect on the screen and have a nice curve edges all round. my have 98% coverage of the original screen, there is a 0.2 mm of gap between the two. in use on my device for about two month's now, having two falls on asphalt from about 70 cm, right on the corner, nothing happens yet. no scratches yet, as i say, i don't have a link for what i bought, i remember it was an unknown Chinese brand. hope it helps.
Why are all of the links aliexpress? (i don't have a problem with it just i prefer ebay/amazon)
DeblaGaming said:
Why are all of the links aliexpress? (i don't have a problem with it just i prefer ebay/amazon)
Click to expand...
Click to collapse
Isn't it the cheapest that way? Just thinking.
Also, about topic - what do You think about 3mk 3D flexible glass for RN4X? Is it worth it? I would love to get as much protection as possible since I basically drowned my previous phone (UMI C Note) in worktime when I was washing 1 cubic meter containers with the pressure cleaner. Phone was in my pocket all the time, but just small stream of water on fingerprint scanner (inb4 you are a dumbass) ruined everyting.
Nanoedge Full Cover Screen Protector for xiaomi redmi 4x Gold Protective Layer Clear Use Layer TPU Screen Protective Film
https://www.aliexpress.com/item/Nan...260.html?spm=a2g0s.13010208.99999999.6.nfIiZj
buczek0711 said:
Isn't it the cheapest that way? Just thinking.
Also, about topic - what do You think about 3mk 3D flexible glass for RN4X? Is it worth it? I would love to get as much protection as possible since I basically drowned my previous phone (UMI C Note) in worktime when I was washing 1 cubic meter containers with the pressure cleaner. Phone was in my pocket all the time, but just small stream of water on fingerprint scanner (inb4 you are a dumbass) ruined everyting.
Click to expand...
Click to collapse
Hi buczek,
have you tried the mentioned above FlexibleGlass? What are your thoughts on it?
there are much different quality of tempered glass in the market. some of tempered glass screen protector is with poor adhesive glue, it's easy to come off. some tempered glass screen protector is easy to be broken. our company supply high quality tempered glass screen protector, it's with high adhesive A/B glue, up to 9H hardness tempered glass material, anti scratch and anti shatter, protect your screen effectively.
more info: weaccessory dot com
Shenzhen Western Electronic Co., ltd
Here in New Delhi I am able to get a variety of glass based screen protectors costing between ₹15-₹50 per piece. Yes they aren't as effective as those super costly ₹800 one 's but still are very good. It's just that they don't come in any fancy packaging and cleansing wipes
use nano glass,its good fit
Can anyone recommend a tempered glass that has not an insane amount of reflection effect? I bought one from a seller on Ali and it is just like a mirror, making it more annoying to use and harder to see in the sun. ali or ebay
tangoviking said:
Can anyone recommend a tempered glass that has not an insane amount of reflection effect? I bought one from a seller on Ali and it is just like a mirror, making it more annoying to use and harder to see in the sun. ali or ebay
Click to expand...
Click to collapse
Seconded.
The same happened to me. Also it gets dirty very easily and make the screen significantly darker.
I use these. They fit perfectly.
https://www.aliexpress.com/item/2pc...tector-film-full-cover-black/32809037642.html
There's no quality screen protectors made from glass available for this model. I already spent like 50$ on them and none of them lasted long and all of them was defective in one or other way. The first one I bought (from Mocolo) with colored edges did come off on it's own after about a week of very light use. Do yourself a favor and listen to my advice... Buy some plastic screen film instead of this cheap crap and save yourself a lot of nerves and money.
I've ordered at about 5-6 Tempered Glass for our Mi Note 3, and it wasn't easy to find one which fitted our phone perfectly. If you'll order one, than search for 'full cover'
This one fitted our display perfectly and is rounded and cheap, too:
https://de.aliexpress.com/item/LITB...-Xiaomi-anmerkung3-Glas-Film/32846070628.html
Yep, finally gave up searching for a fully transparent one as none fits edge to edge, ended up buying the one you posted and somewhat satisfied because it covers edge to edge, albeit the precision is a bit questionable and the matte finish gives different impression of blue (it's more like purple). NVM, my back cover is protected with a transparent TPU case and I can still myself in the "mirror" which is very helpful for back camera selfie (I love to do that because pixel2mod front camera won't work in advanced features like bokeh).
I have a few ones`s: At the moment i use one 9H tempered, and with colour blue. Not the qualith of a Ultimate Shield or Nilkellin, but it works so far...
And covers all screen.
Im using this for my Blue model:
https://www.gearbest.com/screen-protectors/pp_1412259.html
Of course is not a Nilkellin or Ultimate Shield, but covers it all.
My tempered glass
Where did you buy it from?
Gogentle97 said:
My tempered glass
Click to expand...
Click to collapse
Where did you buy it? What brand is the tempered glass?
John Wiliam said:
Where did you buy it? What brand is the tempered glass?
Click to expand...
Click to collapse
Gogentle97 said:
I brought it in Taobao and I don't think it can spam oversea outside of China. It need special oil to fix 2.5d glass problem which is liquid but become solid when dry.
Link:
http://m.tb.cn/h.WvKQuxW
http://m.tb.cn/h.WvJERxN
Click to expand...
Click to collapse
Since mi note3 has curved edges, I bought soft protectors form taobao. Glass protectors dont fit very well.
Ace case do a tempered glass one that fits the corners perfectly. The main issue with it is that only the top and bottom coloured sections have glue on. Hard to explain but the part coving the screen doesn't so the slight air gap does effect viewing quality after a month or two.
I just got a ace case invisible screen protector to replace the tempered glass one and it is excellent. Obviously it won't protect as well from a large fall but I think it should still do a good job.
It's a soft plastic screen protector that you apply wet to the phone and it drys out after a few hours. Perfect fit and the quality is excellent. Feels good under the fingers and is very resistant to smudges. I'm really impressed so far.
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/382360628993