Hello .
Today I tried to Upgrade to B602 .
First I Installed B133. Then After The Update of B602 I Got Error of Com.android.process.phone has Stopped .
Then After i Restored Back To B135 using 3-Button Method Internal Storage Was Reduced to 3 Gb
Can SomeOne Help Me Please .'
@surdu_petru @natorus87
Need Urgent Help :crying::crying::crying::crying:
andromodgod said:
Hello .
Today I tried to Upgrade to B602 .
First I Installed B133. Then After The Update of B602 I Got Error of Com.android.process.phone has Stopped .
Then After i Restored Back To B135 using 3-Button Method Internal Storage Was Reduced to 3 Gb
Can SomeOne Help Me Please .'
@surdu_petru @natorus87
Need Urgent Help :crying::crying::crying::crying:
Click to expand...
Click to collapse
Sadly I can't help with this problem although I can relate to it. Like you I attempted to downgrade, but made a complete mess of it. Ended up with a phone that was totally trashed. I guess your lucky in that you still have a functioning device. I threw mine out and ordered a replacement from AliExpress. It's finally arrived (an L10) and cost US$251.00. No more upgrades for me. It's too troublesome and not very cost effective. If you can't solve your problem, perhaps a replacement might be your best bet. Good luck!
Just use TWRP v. 2.8.1.0, then WIPE and choose Format Internal Storage, confirm "yes".
It could help you !!!!
I found a thread talking about a simmilar issue you have with a nexus 4 device. It could help you a lot !!!!
http://forum.xda-developers.com/nexus-4/general/how-to-fix-internal-storage-16gb-8gb-t2033692
I hope you solve this problem soon !!!!!
Thanks
Thank You All For The Help . Even Though the Phone is P7-L10 I Used The P7-L07 Update Package and Upgraded to B608 and The Partition Restored Successfully .
andromodgod said:
Thank You All For The Help . Even Though the Phone is P7-L10 I Used The P7-L07 Update Package and Upgraded to B608 and The Partition Restored Successfully .
Click to expand...
Click to collapse
Good to hear. You're doing a lot better than me.
Related
Hi everyone,I posted some messages on other threads,but I think it'll be easier if I explain my issue with all the details...
So,I installed the new EMui 3.0 rom beta,everything was ok until my phone rebooted and then it always says "unfortunately com.android.phone has stopped" so I'm stuck into the language choice of the phone and I can't use it,or even go to the setting to set the usb debugg mode on,I searched how to downgrade to the 2.3 emui firmware but I must miss something because I don't understand what to do..
So if someone could help me doing it steap by step I would thank him so much..
Thanks
Gaudhier said:
Hi everyone,I posted some messages on other threads,but I think it'll be easier if I explain my issue with all the details...
So,I installed the new EMui 3.0 rom beta,everything was ok until my phone rebooted and then it always says "unfortunately com.android.phone has stopped" so I'm stuck into the language choice of the phone and I can't use it,or even go to the setting to set the usb debugg mode on,I searched how to downgrade to the 2.3 emui firmware but I must miss something because I don't understand what to do..
So if someone could help me doing it steap by step I would thank him so much..
Thanks
Click to expand...
Click to collapse
try to do a clear cache
Copy The latest stable firmware on SD card put it in your Phone andere do a 3 button recovery... It will work. I had The same problem...
FIXED
osnapitzpacho said:
Hi! I want to downgrade to EMUI 3.0! I put the B133SP01 update app in dload (I created it because there wasnt one) and do local upgrade. It says fail. Please tell me how to downgrade without rooting or something.. Sorry for my n00b question.
Click to expand...
Click to collapse
man there's been at least 6 procedures /threads made to do this..
SEARCH please.
thnx
I have another problem now. I found this thread http://forum.xda-developers.com/ascend-p7/general/how-to-downgrade-emui-b609-to-b602-t3009149/page2 and there was a file called ROLLBACK133SP01, installed it and now theres a little window which says Unfortunately, andorid.process.acore stopped working. PLEASE HELP!!! I can't get rid of it. It keeps popping please HELP ME
EDIT: Factory reset fixed everythink.
osnapitzpacho said:
I have another problem now. I found this thread http://forum.xda-developers.com/ascend-p7/general/how-to-downgrade-emui-b609-to-b602-t3009149/page2 and there was a file called ROLLBACK133SP01, installed it and now theres a little window which says Unfortunately, andorid.process.acore stopped working. PLEASE HELP!!! I can't get rid of it. It keeps popping please HELP ME
EDIT: Factory reset fixed everythink.
Click to expand...
Click to collapse
yes I always say ppl factory reset..
Guys today i received an update for my MOTO G2 . During the installation of the update , my phone got stuck , and it went directly to start screen . It now goes no further than the big M screen at the start .
I've contacted motorola , tried reset , no help .
Guys please help me .
Can you get into bootloader mode
Same issue it seems
Hi there, same issue for me (133 mb update to fix stagefright apparently). I've carried out a factory reset via bootloader but it's still just stuck on the motorola boot screen. I have the dual sim version.
incoherent_boy said:
Hi there, same issue for me (133 mb update to fix stagefright apparently). I've carried out a factory reset via bootloader but it's still just stuck on the motorola boot screen. I have the dual sim version.
Click to expand...
Click to collapse
click my signature (blue) and flash correct firmware from post#1-4 depending on model READ INSTRUCTIONS
reefuge said:
click my signature (blue) and flash correct firmware from post#1-4 depending on model READ INSTRUCTIONS
Click to expand...
Click to collapse
Motorola have agreed to repair. Thanks for your reply though, I might use it to save time!
incoherent_boy said:
Motorola have agreed to repair. Thanks for your reply though, I might use it to save time!
Click to expand...
Click to collapse
Always use warranty if you can ....
my (spare) bricked xt1068 tried a FASBOOT cable (hence no battery power required) and RSDlite 6.2.4 to try to FORCE flash a ROM .. NOT a solution
Solved
Guys a friend of mine solved the problem . He found the 5.0.2 stock rom for my phone and installed it in mine . This solved my problem . For others who had the same problem , I had XT1068 . The ROM installed correctly but the phone didnt go further than boot GIF until the 3rd time I restarted it .
Just make sure your recovery version matches the own you download and install . Just do it you'll be fine .
Hello everyone. First of all, sorry for the long post.
I just bought a OnePlus 3t three days back. Updated it to oxygen 4.1.3 and then rooted it as well. Everything was working fine. But then I decided to downgrade to 3.5.4 since I wanted to try out Xposed Framework. So I downloaded the OS from OP Support website, and went to twrp recovery and installed the os 3.5.4 from the internal memory of the phone. It seemed to install properly but when I rebooted the phone, it started asking for a password. I tried every possible combinations of my passwords but to no avail. I saw online and found some video where I was supposed to flash a new recovery which I did. After that the phone got stuck in Bootloader. There is no bootloader and recovery version detail available on this screen.
If I try to restart the phone it gives me the following error, "Decryption Unsuccessful - Your phone storage has been damaged, unable to read data stored in your phone! To continue to use the phone, you need to reset the phone." There's a button at the bottom of the screen to Reset Phone. When I click that the phone goes back to bootloader mode.
Please help me out here. I have no clue what to do right now. I have tried flashing several recoveries but they give an error "cannot determine the image filename for abcd.img"
Any and all suggestions are welcome. Thanks in anticipation.
Bro looks like a brick device did you check this post?
https://forum.xda-developers.com/oneplus-3t/how-to/unbrick-unbrick-tutorial-oneplus-3t-t3515306
maybe you can find the answer there, hope you can manage to fix the problem :good:
Crash said:
Bro looks like a brick device did you check this post?
https://forum.xda-developers.com/oneplus-3t/how-to/unbrick-unbrick-tutorial-oneplus-3t-t3515306
maybe you can find the answer there, hope you can manage to fix the problem :good:
Click to expand...
Click to collapse
Thank you for the reply. I haven't yet tried it, since the computer recognises the phone just fine. It even shows up in the fastboot devices list in cmd. Maybe, I should give it a go.
Crash said:
Bro looks like a brick device did you check this post?
https://forum.xda-developers.com/oneplus-3t/how-to/unbrick-unbrick-tutorial-oneplus-3t-t3515306
maybe you can find the answer there, hope you can manage to fix the problem :good:
Click to expand...
Click to collapse
Ok so I did manage to reinstall twrp. But I have no idea what to do next. Any suggestions ?
I managed to fix it. After the twrp recovery was installed, it started asking me for a password. Which I tried and didn't work. But then I just wiped the phone and it went back to factory settings somehow.
Now the phone is back to oxygen 3.5.4 and works fine.
Hope this can be helpful to someone else.
I'm glad u fixed it
Can u please post the correct steps to avoid this issue in the first place .
I'm on 3.5.4 but I may want to try latest versions and come back to 3.5.4
I have just got android P update a few munites ago. After restart, My Phone required password as ussual. But it doesn't appear keyboard .... That's amazing ! Now i'm crying over my phone =((( just see , can't touch ! Anybody with knowlege tell me how to solve this problem ! I have no idea now and not good at deeply system. I just bought phone and use it , no root , no unlockBoatloader so far !
Ngheoden said:
I have just got android P update a few munites ago. After restart, My Phone required password as ussual. But it doesn't appear keyboard .... That's amazing ! Now i'm crying over my phone =((( just see , can't touch ! Anybody with knowlege tell me how to solve this problem ! I have no idea now and not good at deeply system. I just bought phone and use it , no root , no unlockBoatloader so far !
Click to expand...
Click to collapse
I ve got problem too! I got update today .... system->system updates (was on 9.6.17.0) and after downloaded and applying i had option "RESTART"
After restart -> BLACK SCREEN
(Flashing again V9.6.10.0 version, that one was thy only one that worked with MiFlash - newer couldnt install system on my MI A2)
Ngheoden said:
I have just got android P update a few munites ago. After restart, My Phone required password as ussual. But it doesn't appear keyboard .... That's amazing ! Now i'm crying over my phone =((( just see , can't touch ! Anybody with knowlege tell me how to solve this problem ! I have no idea now and not good at deeply system. I just bought phone and use it , no root , no unlockBoatloader so far !
Click to expand...
Click to collapse
Force restart the device.
caaajq said:
I ve got problem too! I got update today .... system->system updates (was on 9.6.17.0) and after downloaded and applying i had option "RESTART"
After restart -> BLACK SCREEN
(Flashing again V9.6.10.0 version, that one was thy only one that worked with MiFlash - newer couldnt install system on my MI A2)
Click to expand...
Click to collapse
Seems like i have disabled GGkeyboard before cause i used to another keyboard for getting better exp in my language ! After restart several times, i turned off power and like you said : Black Screen !
zurik said:
Force restart the device.
Click to expand...
Click to collapse
i did it but it doesn't work ! After that , i have to use factory reset and lose my document =(( . The problem have been sovled !