Database Develop

[STICKY] I9505G GE GALAXY S IV ( INDEX ) ROM's / LINKS / HOW TO THREAD

Welcome to the [STICKY] I9505G GE GALAXY S IV ( INDEX ) ROM's / LINKS / HOW TO THREAD formally the DISCUSSION GUIDE ​
This is the Official Index Roll up thread for the I9505G Google Edition Galaxy S IV. In this Index you will find helpful, links, guides, how to's and instructions for your I9505G.​
Please Post any links or helpful information in this thread or you can PM me so I can link it in the OP ( If your on the I9505/I9500 Please do NOT ASK about development for your device this is for the I9505G ONLY
(DISCLAIMER) As always I nor anyone is responsible if you cannot follow instructions in this or any other thread. We assume NO liability for bricks, loss of job, or the end of life as we know it.
GUIDES & LINKS
How to get CM 10.1 & CM 10.2 working on the I9505G
How Unlock the Bootloader for the I9505G
[OTA] OTA ZIP 4.3 for I9505G
How to Update your Baseband to get the 4.3 OTA
TOUCHWIZ Development Thread Q&A
Camera Save to SD Card for Google Edition ROM's
I9505G How to Set Device Mount Points in Android Kitchen GE S IV
4.3 SD Card Issue Fixed
How to upgrade a Stock+Root+Custom_Recovery I9505G from 4.3 to 4.4 and keep all Data​
ROOTING THREADS
How to Root 4.2, 4.3, 4.4 JB, Kit Kat I9505G
ROM's
[ROM][Linaro-4.8] XenonHD-4.4.2 Alpha 1 (5/1/14) *Truly Stable, Fast & Butter​
GOOGLE LITE EDITION 4.2.2 v.2 MFD
GOOGLE LITE EDITION 4.3 I9505GUEUBMH1 Ktoonsez Kernel
TOUCHLITE GE TOUCHWIZ ROM
[ROM] Google Edition 4.3 [Clean][Deodex][276MB]​
RECOVERY
How to install TWRP via Odin on the I9505G
TWRP for the I9505G
[BETA][RECOVERY] ClockworkMod Recovery 6.0.3.6​
[ODIN[TAR] Stock Recovery Images
MODEMS
ODIN TAR MODEMS
STOCK FIRMWARE LEAKS
Stock ODIN FIRMWARE Leaked 4.3 MFP ​
Stock ODIN FIRMWARE Leaked 4.3 MG8​
ODIN AND HEIMDAL PACKAGES​
Stock HEIMDAL 4.2.2 MFD back to Stock​
[ODIN][TAR] I9505GUEUAMFD 4.2.2 Full Rooted Restore
[ODIN][TAR] I9505GUEUBMH1 4.3 Full Rooted Restore
[ODIN][TAR] I9505UEUBMH5 4.3 Full Rooted Restore
[ODIN][TAR] I9505GUEUBMKG 4.4 Full Rooted Restore
[ODIN][TAR] I9505GUEUBML4 [4.4.2] Full Rooted Restore​
[ODIN][TAR] 4.4.3 I9505GUEUCNE3 Full Rooted Restore​
[ODIN][TAR] 4.4.4 I9505GUEUCNF3 Full Rooted Restore​

Reserved
Big Thanks to Illogic6 for being the Very 1st Person to get Touchwiz Booted to the I9505G post #31 and SamuriHL for solving the Baseband Update Issue and Chainfire
Modem Update : Due to the secure boot loader we cannot flash modems via cwm or any other custom recovery. You MUST update your firmware via Odin
Touchwiz Works with some ROM's like BareBones from the I9505 forum being successfully booted on the I9505G. TW Development is ongoing for the I9505G but with the small partition size some issues exist, and are being researched and worked out.
http://forum.xda-developers.com/showthread.php?t=2405273
11/28/2013 : KitKat initial release this week New Updated Odin Packages and ROM's please check A&D section
DONT FORGET TO THANK THE MEMBERS AND DEVS WORKING HARD ON THE I9505G DEVELOPMENT
07/21/2014: I just wanted to make a note that I still get emails and requests for help and although I am no longer doing any sort of work on the I9505G I will try to help you out if you PM me. PLEASE BIG THANK YOU TO @SamuraiHL he is really the one maintaining everything for I9505G Owners and if you have not thanked him please do. Actually without volunteering him he is your best POC for anything current. I will maintain the thread for organization now and then. ALOHA

MJHawaii said:
Reserved :good:
Click to expand...
Click to collapse
Nice to see someone do this. Hope this will build up and morph into ROM's, etc.
How is your ROM coming along?

wilbarger said:
Nice to see someone do this. Hope this will build up and morph into ROM's, etc.
How is your ROM coming along?
Click to expand...
Click to collapse
Right now just standard kitchen tweaks on 4.3 but I am trying to get the whole device mount points set up in Cygwin and I'm having trouble because when I extract everything and open up the recovery.fstab file with notepad ++ it does not show anything but 0p1 nothing for system, boot & data so I'm lost and need help
Sent from my GT-I9505G using Tapatalk 2

MJHawaii said:
Right now just standard kitchen tweaks on 4.3 but I am trying to get the whole device mount points set up in Cygwin and I'm having trouble because when I extract everything and open up the recovery.fstab file with notepad ++ it does not show anything but 0p1 nothing for system, boot & data so I'm lost and need help
Sent from my GT-I9505G using Tapatalk 2
Click to expand...
Click to collapse
One person you might contact is mohan_kr. He has come over to the S4 from the Skyrocket recently. Excellent at working on the ROM's. Sorry I can not be of assistance, but I am not very advanced on Android.

wilbarger said:
Nice to see someone do this. Hope this will build up and morph into ROM's, etc.
How is your ROM coming along?
Click to expand...
Click to collapse
wilbarger said:
One person you might contact is mohan_kr. He has come over to the S4 from the Skyrocket recently. Excellent at working on the ROM's. Sorry I can not be of assistance, but I am not very advanced on Android.
Click to expand...
Click to collapse
That's what this thread is for though for everyone to get together share information and collaborate.

Chahk's post about mount points and getting other CM/AOSP ROMs working on I9505G deserves its own link:
http://forum.xda-developers.com/showpost.php?p=43843048&postcount=30

MJHawaii said:
Right now just standard kitchen tweaks on 4.3 but I am trying to get the whole device mount points set up in Cygwin and I'm having trouble because when I extract everything and open up the recovery.fstab file with notepad ++ it does not show anything but 0p1 nothing for system, boot & data so I'm lost and need help
I saw Chahk post and it is helpful this is where I'm at right now read above. I did pm Chahk and a few others for help. I will work on it a little later this weekend
Sent from my GT-I9505G using Tapatalk 2
Click to expand...
Click to collapse
Sent from my GT-I9505G using Tapatalk 2

irishrally said:
Chahk's post about mount points and getting other CM/AOSP ROMs working on I9505G deserves its own link:
http://forum.xda-developers.com/showpost.php?p=43843048&postcount=30
Click to expand...
Click to collapse
x2
I've found that very useful. Been able to get every AOSP/CM based ROM to boot by editing the updater-script to match the correct partition.
Has anybody noticed that photos taken with the front facing camera on CM sometimes have green distortion? That was the only bug I've found. Unfortunately, that flared up my phone OCD enough to go back to the 4.3 leak.
Thanks for putting this thread together, OP!

illogic6 said:
x2
I've found that very useful. Been able to get every AOSP/CM based ROM to boot by editing the updater-script to match the correct partition.
Has anybody noticed that photos taken with the front facing camera on CM sometimes have green distortion? That was the only bug I've found. Unfortunately, that flared up my phone OCD enough to go back to the 4.3 leak.
Thanks for putting this thread together, OP!
Click to expand...
Click to collapse
Your Welcome. So I read on the other thread and I know myself and others are looking at how we can port other ROMs specifically touchwiz over to the G the partition as you know is an issue but I think with collaboration can be solved soon.
Keep it coming let's solve problems!
Sent from my GT-I9505G using Tapatalk 2

MJHawaii said:
Your Welcome. So I read on the other thread and I know myself and others are looking at how we can port other ROMs specifically touchwiz over to the G the partition as you know is an issue but I think with collaboration can be solved soon.
Keep it coming let's solve problems!
Sent from my GT-I9505G using Tapatalk 2
Click to expand...
Click to collapse
I took a TW ROM and edited the script for our devices. It boots, but the display never kicks on. You get the boot animation sound and it even mounts the storage on my computer.

illogic6 said:
I took a TW ROM and edited the script for our devices. It boots, but the display never kicks on. You get the boot animation sound and it even mounts the storage on my computer.
Click to expand...
Click to collapse
Wow that's great maybe you can help me with my script it sounds like your further along than some. I wonder what would cause the display bug doesn't sound like a boot issue
Sent from my GT-I9505G using Tapatalk 2

MJHawaii said:
Wow that's great maybe you can help me with my script it sounds like your further along than some. I wonder what would cause the display bug doesn't sound like a boot issue
Sent from my GT-I9505G using Tapatalk 2
Click to expand...
Click to collapse
Here's the ROM I was messing with. I used the "old firmware" because it was the newest one when I first looked. http://forum.xda-developers.com/showthread.php?t=2349369
I've attached my modded updater script. (You will have to remove the .txt extension. Wouldn't let me upload without it.) All I had to do was edit which /dev/block the script mounts before it copies stuff over. If I recall correctly, I only had to change the dev it flashes the boot.img to. See this post: http://forum.xda-developers.com/showpost.php?p=43843048&postcount=30
include 'standard_disclaimer.php';

illogic6 said:
Has anybody noticed that photos taken with the front facing camera on CM sometimes have green distortion?
Click to expand...
Click to collapse
I think this might be fixed in the newest CM nightly. I've took about 20 selfies with the front facing camera and haven't had distortion at all. Before I'd get it every 3 or 4 photos.
Edit: Disregard the above. The problem is back, but I'm thinking it might be the 4.3 camera zip I've been using. Hmmmmmmm......

I think I jumped the gun a bit on rooting my I9505G right when I got it. I've never successfully rooted it, but I managed to get on the 4.3 ROM with a few quirks here and there. My ultimate goal is to get Paranoid Android with halo running, but I'll have to dedicate a day to the whole process. I'll be keeping track of this thread.

illogic6 said:
Here's the ROM I was messing with. I used the "old firmware" because it was the newest one when I first looked. http://forum.xda-developers.com/showthread.php?t=2349369
I've attached my modded updater script. (You will have to remove the .txt extension. Wouldn't let me upload without it.) All I had to do was edit which /dev/block the script mounts before it copies stuff over. If I recall correctly, I only had to change the dev it flashes the boot.img to. See this post: http://forum.xda-developers.com/showpost.php?p=43843048&postcount=30
include 'standard_disclaimer.php';
Click to expand...
Click to collapse
Thanks a lot I will take a look tomorrow and see what I can do
Sent from my GT-I9505G using Tapatalk 2

illogic6 said:
Here's the ROM I was messing with. I used the "old firmware" because it was the newest one when I first looked. http://forum.xda-developers.com/showthread.php?t=2349369
I've attached my modded updater script. (You will have to remove the .txt extension. Wouldn't let me upload without it.) All I had to do was edit which /dev/block the script mounts before it copies stuff over. If I recall correctly, I only had to change the dev it flashes the boot.img to. See this post: http://forum.xda-developers.com/showpost.php?p=43843048&postcount=30
include 'standard_disclaimer.php';
Click to expand...
Click to collapse
Great work Illogic I wonder why TW will not display I tried as well but I did not get as far as you mine fails during the installation.
Also did you see my post on getting Cygwin to set device mount points that in itself will speed things up
Sent from my GT-I9505G using Tapatalk 2

MJHawaii said:
Great work Illogic I wonder why TW will not display I tried as well but I did not get as far as you mine fails during the installation.
Also did you see my post on getting Cygwin to set device mount points that in itself will speed things up
Sent from my GT-I9505G using Tapatalk 2
Click to expand...
Click to collapse
I haven't used Cygwin before. I'll take a look at it today.
Also going to mess around with TW a little more. Maybe we just need some libs from the stock 9505g rom or something.
Update: I'm afraid I may have mislead you earlier. It appears that you need more than just the updated update-script in order to get touchwiz to boot. You also need a kernel from one of the 4.3 leaks. Here's the one I've been using. (Attached) Not only does it boot, but the soft keys work and you can hear the sound effects of the lock screen. I'm very close.

illogic6 said:
I haven't used Cygwin before. I'll take a look at it today.
Also going to mess around with TW a little more. Maybe we just need some libs from the stock 9505g rom or something.
Update: I'm afraid I may have mislead you earlier. It appears that you need more than just the updated update-script in order to get touchwiz to boot. You also need a kernel from one of the 4.3 leaks. Here's the one I've been using. (Attached) Not only does it boot, but the soft keys work and you can hear the sound effects of the lock screen. I'm very close.
Click to expand...
Click to collapse
Wow Illogic your close bro thanks for your hard work the libs does sound like it would cause the display problem I'm gonna play around with this too. All I did was unpack stock 4.3 and zip and deo the files with root. The problem I am having is that I am still learning U-scripts and so I cannot get anything to flash. I get failed on 0p21 even though its changed. Maybe I can pm you what I did later and get your feedback cuz your miles ahead of me
Sent from my GT-I9505G using Tapatalk 2

I've merged libs from the leaked 4.3 build into the TW ROM without overwriting anything. Didn't seem to change anything. At this point, I'm playing with magic I don't understand so not sure how much farther I'm going to get.
Would really like figure out which files in the system are responsible for the display. Perhaps we need to overwrite those files. Google is failing me so far.
---------- Post added at 04:45 PM ---------- Previous post was at 04:29 PM ----------
Tada! :victory:
The error message goes away. Right now, the web browser force closes... that might be because of the ROM I was modifying. What I did was use the 4.2.2 kernel that shipped with the google play phones. That booted AND activated the display.
http://i.imgur.com/HZaraPK.jpg

Nexus 7 Flo: WLAN doesn't work

Hi guys,
I've updated my Nexus 7 FLO to version 4.4.4-20140704-flo-NIGHTLY
After reboot the WLAN dies not work.
Is there an Kernel/driver issue?
Kind regards
Chris

Read commit comments here.

Problem is we're in the process of getting a new maintainer fully spooled up. There are various techniques device maintainers have available to them that need to be used for certain device maintenance tasks (like a full upstream merge) which aren't normally available to gerrit users.
Andre hasn't quite yet learned how to properly wield his newly-given powers. Specifically, the kernel tree really shouldn't be a fully squashed merge, but individual commits. He reverted the squash but the push of the individual commits failed last time he tried it. He went away for a few days around the same time pulser sorted his access, so the kernel is still backleveled.
I could fix this myself, but I want Andre to do this on his own so he knows how to do it going forward.

?
Sorry but I didn't understand this in detail. Only that some merges die not work.
Workaround for me was to install Franco Kernel.
Now WLAN works again.
May there are some more quality tests required before merge into nightlies?
Kind regards,
Chris

cnexus4 said:
?
Sorry but I didn't understand this in detail. Only that some merges die not work.
Workaround for me was to install Franco Kernel.
Now WLAN works again.
May there are some more quality tests required before merge into nightlies?
Kind regards,
Chris
Click to expand...
Click to collapse
No, the issue is that we have a new maintainer that needs to learn some new maintenance techniques. Rather than push the fixes ourselves, we want him to do it, but he's on vacation for a few days.

Thanks for your answer. OK, wie all have to learn new technologies.
Kind regards,
Chris

cnexus4 said:
Thanks for your answer. OK, wie all have to learn new technologies.
Kind regards,
Chris
Click to expand...
Click to collapse
I just tried to install OmniRom on my Nexus 7 2013 (flo)
Once installed, it is not able to do wireless internet, which is a fatal error.
Will it be posted in this thread, or where should I look to know when this is corrected?
Thanks in advance, and sorry about the prior attitude. (long day)
- Gary

When I last tried this about the 20th July wifi was still not working can anyone confirm its safe to update - I had to fall back to a month old image as I wasn't sure when the issue appeared..
Tia
---------- Post added at 02:58 PM ---------- Previous post was at 02:39 PM ----------
codifies said:
When I last tried this about the 20th July wifi was still not working can anyone confirm its safe to update - I had to fall back to a month old image as I wasn't sure when the issue appeared..
Tia
Click to expand...
Click to collapse
Answering my own question I downloaded a Franco kernal as a precaution and tested it, happy to say the new maintainer has it well in hand by the looks as its all working OK

Okay there's something else going on, quite an odd one this...
After playing with some kernels WiFi stopped working - no great surprise, so I reinstalled the latest nightly that *was* working and now it doesn't ! Even after wipe of data / system install of month old (or latest) and I can't get anything from WiFi...
I've had to restort to using CyanogenMod as I can't seem to work out what's going on here !!!
Any ideas and I'm up for investigating - the only wrinkle is I'm currently using a multirom version of twrp but I'm not injecting it, so that shouldn't matter ?
Any ideas folks?

There's a fixed_wifi_boot.img that needs to be downloaded and flashed in the bootloader. If you've flashed a recovery before, it's similar. Just do "fastboot flash boot fixed_wifi_boot.img" in the right directory.

[QUOTEr;54470792]There's a fixed_wifi_boot.img that needs to be downloaded and flashed in the bootloader. If you've flashed a recovery before, it's similar. Just do "fastboot flash boot fixed_wifi_boot.img" in the right directory.[/QUOTE]
What does this file actually do?
Will it prevent other ROMs such as CyanogenMod or kernels using googles official binary blobs from working?
Can it be undone ?
Where is the file?
Tia

The file is in the same location where you downloaded the OmniROM nightly. As for conflicts between other ROMs/kernels, I'm not sure. I imagine there's an official boot image somewhere that can be flashed, maybe Google's stock images install it.
Sent from my Nexus 7 (2013) using Tapatalk

thevypr said:
The file is in the same location where you downloaded the OmniROM nightly.
Click to expand...
Click to collapse
Code:
fastboot flash boot fixed_wifi_boot.img
You can find the file on dl.omnirom.org/flo/ at the bottom (I can't post external link)
I will try soon.

I'm reluctant to try this if it means I wouldn't be able to use stock ROMs or say cyananogen mod or some other such...
I'd love to hear an explanation of what its doing too....

codifies said:
I'd love to hear an explanation of what its doing too....
Click to expand...
Click to collapse
You should look at this thread http://forum.xda-developers.com/showthread.php?t=2626831&page=12

I can't write into above mentioned thread!?
But I'm happy that WLAN is working again.

[Q&A] [ROM][OVATION][EMMC][UNOFFICIAL] Liquidsmooth KitKat v3.2

Q&A for [ROM][OVATION][EMMC][UNOFFICIAL] Liquidsmooth KitKat v3.2
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][OVATION][EMMC][UNOFFICIAL] Liquidsmooth KitKat v3.2. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

LS 3.2 ovation settings
Hi there,
I just wondered if there is a way of making the settings to be two-columned (tablet like) instead of one-columned (phone like).
Thanks!

seems superb!
Thanks for this ROM, Jon! even though i've had my Nook HD+ since the past 8 months now, and had been contemplating putting in a custom ROM since long, its only NOW that i finally took a plunge. installed CM 10.1.3 & CM 10.2.1 since y'day; kept each for barely a few hours (wanted to just test), and then installed this ROM today, and am getting a feeling that am now hooked! right from the loading animation-screen, to the UI, it seems so good & smooth (smoother than CM, i felt)! another ROM that i have in mind (And have kept downloaded) is the pac-man ROM, but LS seems so good that i don't think i would install pac-man anytime soon, and may be later, only if i want a change.
i will proceed to installing apps and all, and test this for a few days. kudos!
P.S. - i have less than 10 posts here on XDA forums, hence my post got redirected to this thread.

I have installed the new f2fs rom and it is very fast and smooth! This is the best my nook has ever worked!
Sent from my BN NookHD+ using XDA Free mobile app

I am now having problems. It seems like certain apps are causing it to crash and reboot.
Sent from my BN NookHD+ using XDA Free mobile app

I am having the same problem as angelofmenoth, even with Jon's fix. I sure would like to have this work well. It is so smooth when it is working!

KevHD+ said:
I am having the same problem as angelofmenoth, even with Jon's fix. I sure would like to have this work well. It is so smooth when it is working!
Click to expand...
Click to collapse
LOL, You or angelofmenoth will have to get me a proper logcat.
(as I don't have this issue).
which means you need adb.
adb logcat &> logcat.txt
during first few seconds of a bootloop then ctr-c
post log on pastebin.com and link here
Also, be sure ,if using art runtime, to switch back to dalvik.
Besides that, there's not much else I can recommend.
I believe incompatible versions of gapps may be responsible for some peoples problems, Try it without gapps first. If you have no issues without gapps, try a more compatible version.

It does work fine without gaaps. I am using PA gaaps, but I will try something else and see if it works. Thanks!

Enabling Wifi causes reboot on F2FS Liquid Smooth
I just tried the F2FS version of Liquid Smooth (after following the directions to reformat/change the format of the 3 partitions) and it booted ok, but every time I enable WiFi it causes it to reboot... Any ideas why? I'm doing this on an HD+ 32g

don.a.oneil said:
I just tried the F2FS version of Liquid Smooth (after following the directions to reformat/change the format of the 3 partitions) and it booted ok, but every time I enable WiFi it causes it to reboot... Any ideas why? I'm doing this on an HD+ 32g
Click to expand...
Click to collapse
The fix-mac.sh will occasionally exhibit a race condition on F2FS filesystem (on some installs).
the fix:
Code:
cd /system/etc/firmware/ti-connectivity
mount -o rw,remount /system
rm wl1271-nvs.bin
[email protected]:/system/etc/firmware/ti-connectivity # fix-mac.sh
Writing mac address 58:67:1A:B1:XX:XX to file /system/etc/firmware/ti-connectivity/wl1271-nvs.bin
reboot
You should only have to do this once.

Loaded this rom and works great I used this gapps package and worked just fine
https://www.androidfilehost.com/?fid=23501681358558856
Hope that helps
Tony

[Q&A] [ROM-AOSP] OFFICIAL CM11.0 KFire HD 7 (KK 4.4.2) [05/20 CAMERA/AUDIO FIXES]

Q&A for [ROM-AOSP] OFFICIAL CM11.0 KFire HD 7 (KK 4.4.2) [05/20 CAMERA/AUDIO FIXES]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM-AOSP] OFFICIAL CM11.0 KFire HD 7 (KK 4.4.2) [05/20 CAMERA/AUDIO FIXES]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

LinearEquation said:
Hopefully you have a backup in twrp you can flash. You may also want to try Nova Launcher as one of the stock launchers went hinky with some updates.
Click to expand...
Click to collapse
i heve same problem. But stock Kindle Os. have not all of gapps capability.

Running the update from two days ago and it's running good so far. Of course, I have not tested every app but, no glitches, movies are running good from Vudu and Netflix. Thanks to those still pushing commits.
---------- Post added at 10:42 PM ---------- Previous post was at 10:37 PM ----------
QA bot (2 posts above) is posting monetized ad links from apicdn.viglink.com/api/click?key=null&out=http%3A%2F%2Fshowthread.php%3Ft%3D2543455&loc=http%3A%2F%2Fforum.xda-developers.com&subid=cfcd208495d565ef66e7dff9f98764da
Avoid clicking.

Linear - your post and report do not make sense. QA bot is not changing any URLs; I would be inclined to believe you have some browser malware that is effecting your machine and changing links on your box.
Hope you are able to get your problem squared away.

Divine_Madcat said:
Linear - your post and report do not make sense. QA bot is not changing any URLs; I would be inclined to believe you have some browser malware that is effecting your machine and changing links on your box.
Hope you are able to get your problem squared away.
Click to expand...
Click to collapse
I have no malware on any of my devices, my laptop or my pc. I can see still see the redirect. I'd be happy to post a video of the redirect if you want.

BY all means, we are happy to look at what you are seeing; but browsing right now, i can tell you that on my work machine, i have no redirects, nor should there be any.

Cant restore back from Cyogenmod 11
Hello Everybody,
I keep trying to return my fire hd7 back to stock from cyogenmod 11. It keeps coming up with a provisioning fail or a boot loop. I can always get back to cm 11 with fastboot and adb but no matter what I try I cant get it back to stock. Am I missing something here? Many thanks in advance.
Gozzie

battery issue since installing thr rom
First of all thank you for this rom Cm11.0 on the kfhd 7. Since installing however the Kindle reboots whenever the battery goes below 40%

HWAcclerate video after a suspend
I'm running the latest nightly of CM11 (cm-11-20150112-NIGHTLY-tate.zip). If an app that does HWAccelerated video is running and a device goes to suspend, after a while the device is resumed the device HW Acceleration stops working. Tested out with MX Player. Netflix stops working after the suspend completely.
Is this a known issues? If not I can provide logs, more data and testing.

Hi, I'm on CM 11 nightly 20150302 for Kindle HD7. All of a sudden any video that i try to watch stutters. Netflix, Hulu, Youtube even streaming from my pc. What should I do?

Have you rebooted recently? If not, try that. Also, boot into recovery and wipe your caches. Both have helped me in the past.
Sent from my SCH-I545 using XDA Free mobile app

RedsonRising said:
Have you rebooted recently? If not, try that. Also, boot into recovery and wipe your caches. Both have helped me in the past.
Sent from my SCH-I545 using XDA Free mobile app
Click to expand...
Click to collapse
Thank you. Rebooting worked. Appreciate it. I don't know how come I didn't try that initially.

Work on allwinner a13 tablet
Device: foston m787s 7"?

This is for kindle fire HD Tate only.
Sent from my DROID RAZR M using XDA Free mobile app

kindle tate - 2cnd boot img and twrp
anyone know where i can download these files from as goo is offline?
are these files included in the KFHD System.img Restore Tool?
google search only shows xda links and goo links.
thanks in advance for responses

phipps_2000 said:
anyone know where i can download these files from as goo is offline?
are these files included in the KFHD System.img Restore Tool?
google search only shows xda links and goo links.
thanks in advance for responses
Click to expand...
Click to collapse
Go to the Cyanogen site and look for the Tate downloads.
Sent from my SCH-I545 using XDA Free mobile app

RedsonRising said:
Go to the Cyanogen site and look for the Tate downloads.
Sent from my SCH-I545 using XDA Free mobile app
Click to expand...
Click to collapse
I have gone to the site for cyanogen and i find the cm11 or cm12 downloads but DO NOT see any downloads for the "2cnd boot img" and "twrp" files for the kindle tate.

Any mirrors available? the nightly links for cm11 is 404'ing or either giving a 13 byte file. right click then save as gives "no file"s http://download.cyanogenmod.org/?device=tate ty

phipps_2000 said:
I have gone to the site for cyanogen and i find the cm11 or cm12 downloads but DO NOT see any downloads for the "2cnd boot img" and "twrp" files for the kindle tate.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=60766995

beer-2k said:
Any mirrors available? the nightly links for cm11 is 404'ing or either giving a 13 byte file. right click then save as gives "no file"s ty
Click to expand...
Click to collapse
Replace all whitespaces in the code segments with dots to reconstruct the proper URLs (and if the board want's me to *hitpost to get a post count of ten so it shall be).
All I could find was cm-11-20150531-NIGHTLY-tate.zip (the second to last/latest):
Code:
www ex ua/477582708431
, MD5 matches the one given on the CM nightlies download page
Code:
archive is/IpF5S
as the CM11 entries will most likely disappear there soon).
If someone should happen to have cm-11-20150607-NIGHTLY-tate.zip (the latest/last one) I would be very interested in it, too.

[T710/T715][UNOFFICIAL] LineageOS 14.1 20180303 (ABANDONED)

LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community
There are lineage os builds for only tab s2 8.0 2015 models.
this version is stable without any known issues.
Root is not included here. For root install magisk or su-addon ( https://mirrorbits.lineageos.org/su/addonsu-14.1-arm-signed.zip )
install:
flash with twrp
don't forget to flash gapps ( opengapps.org ) you need version for android 7.1 arm
download:
20180102
t710: https://drive.google.com/open?id=1tkzdpZdGXNouu0ig-NHGErWfmUP_CICP
t715: https://drive.google.com/open?id=1cLX-gWvUM9miJ3JTmcnWeXrNxI0F3II5
test build 20180303 for t710 is here: https://forum.xda-developers.com/showpost.php?p=75756582&postcount=147
sources:
https://github.com/bonuzzz/android_kernel_samsung_gts2
https://github.com/bonuzzz/android_device_samsung_gts2-common
https://github.com/bonuzzz/android_device_samsung_gts28wifi
https://github.com/bonuzzz/android_device_samsung_gts28ltexx
https://github.com/bonuzzz/android_vendor_samsung_gts2-common
https://github.com/bonuzzz/android_vendor_samsung_gts28wifi
https://github.com/bonuzzz/android_vendor_samsung_gts28ltexx

WOW! This is the first build of Lineage that works great on my tab! Didn't test fingerprint but autobrightness and camera is working great. Thank a lot. On T710 by the way.

See my signature for twrp 3.1.1-0 for both gts28wifi and gts28ltexx.
Please note that twrp 3.2.0-0 has just been released! I'll be working on bringing it up to the Galaxy Tab S2 2015 tablets as soon as possible
On a related matter, I own a 9.7 wifi variant and I build for it daily. Netflix doesn't work with the official gts2-common repo, but if you use mine it will. I kept a long since abandoned fix which has worked very well in my builds.

Do we need gapps, thank you sooooooo much for this!!!!
Sent from my SM-T710 using Tapatalk
---------- Post added at 01:04 AM ---------- Previous post was at 12:45 AM ----------
ripee said:
See my signature for twrp 3.1.1-0 for both gts28wifi and gts28ltexx.
Please note that twrp 3.2.0-0 has just been released! I'll be working on bringing it up to the Galaxy Tab S2 2015 tablets as soon as possible
On a related matter, I own a 9.7 wifi variant and I build for it daily. Netflix doesn't work with the official gts2-common repo, but if you use mine it will. I kept a long since abandoned fix which has worked very well in my builds.
Click to expand...
Click to collapse
You sir, are a good among men, which gapps do you recommend? And we can install su manually whithout messing up the fixes you got to make this bad boy run? Once again thank you.
Sent from my SM-T710 using Tapatalk

lahegry said:
Do we need gapps, thank you sooooooo much for this!!!!
Sent from my SM-T710 using Tapatalk
---------- Post added at 01:04 AM ---------- Previous post was at 12:45 AM ----------
You sir, are a good among men, which gapps do you recommend? And we can install su manually whithout messing up the fixes you got to make this bad boy run? Once again thank you.
Click to expand...
Click to collapse
I flash pico on my phone and tablet, but even stock or higher should work if the builds are from official sources. I also recommend Magisk if you wish to root. If these builds have su root, Magisk simply uninstalls it before installing itself.

bonuzzz, you did what most (self proclaimed) devs failed to achieve and deliver for the T710/715 in the last months! i just installed the ROM and tried it out the last few hours. finally got a clean and reliable android for my T710.
it's working really smooth, no issues so far. everything - including bluetooth and fingerprint - is working perfectly [edit: haven't tried it, since not needed: according to some posts in this thread stock camera doesn't seem to be working properly]. i am really anstonished and amazed by this great initial release, thanks a lot. i hope you keep on delivering such a good work.
many thanks and best regards from germany

For me on my T710 the microphone did not work. So it isn't in perfect working order yet and the battery drains quite fast, but it's miles better than the previously shared builds here on XDA, and most certainly usable.
I also had issues with certain apps not working properly, so I ended up going back to stock for now. (more precisely: the Antutu 3D part and the Focus gallery application).

TWRP 3.2.0-0 for gts28wifi and gts28ltexx!
twrp-3.2.0-0-gts28wifi.img
twrp-3.2.0-0-gts28wifi.tar
twrp-3.2.0-0-gts28ltexx.img
twrp-3.2.0-0-gts28ltexx.tar

@ripee,
create your own topic please. dont spam here. thank you

bonuzzz said:
@ripee,
create your own topic please. dont spam here. thank you
Click to expand...
Click to collapse
Sorry if twrp is spam. Best of luck fiddling around with lineage recovery. For everyone's sake, I hope that Netflix works on your builds.

Thanks a lot for this build. An important progress for the T710/T715.
And also thx for the current TWRP link @ripee, missed that one.

Camera app force closed. Dont save any pictures

If you use a third party app like open camera, it actually works really well.
Either way, the microphone doesn't work at all, as in all roms for this device, and sadly it is a deal breaker for me since I use my tablet for video calls all the time.

azenyr said:
If you use a third party app like open camera, it actually works really well.
Either way, the microphone doesn't work at all, as in all roms for this device, and sadly it is a deal breaker for me since I use my tablet for video calls all the time.
Click to expand...
Click to collapse
open camera same problem.
My twrp recovery is old. I update this and I will try again

Having used this ROM for the last few days on a T710, I experienced a very stable system. UI was always smooth, no serious issues so far. :good:
However, I observed some strange behaviours/minor issues:
Fingerprint unlock isn't always working reliably. Sometimes, when trying to unlock the lockscreen, the finger on the fingerprint sensor doesn't seem to be detected and the PIN has to be entered manually.
LiveDisplay is not always active when the device comes from sleep and has to be unlocked. Upon the next sleep/active via short press on the power button iteration, the LiveDisplay mostly works as expected.
Once, presumably a wakelock drained the battery throughout the day until it was empty and the device turned itself off. I don't know why this happened and can't reproduce it.
Altogether a very successful start for this ROM, I will keep it on my device and hope the dev keeps on working on it to further improve it or even update to Lineage 15.x...
Thanks, @bonuzzz!

Sorry for intruding again, but we are about to get official TWRP support! I've been asked to test the "release candidate" images. As I don't have either a gts28wifi or gts28ltexx, I'd like to post the links here and ask for feedback. I'll create a separate TWRP thread once I confirm that these twrp builds work. I apologize again:
http://build.twrp.me/twrp-3.2.1-0-gts28wifi.img
http://build.twrp.me/twrp-3.2.1-0-gts28wifi.img.tar
http://build.twrp.me/twrp-3.2.1-0-gts28ltexx.img
http://build.twrp.me/twrp-3.2.1-0-gts28ltexx.img.tar

ripee said:
Sorry for intruding again, but we are about to get official TWRP support! I've been asked to test the "release candidate" images. As I don't have either a gts28wifi or gts28ltexx, I'd like to post the links here and ask for feedback. I'll create a separate TWRP thread once I confirm that these twrp builds work. I apologize again:
http://build.twrp.me/twrp-3.2.1-0-gts28wifi.img
http://build.twrp.me/twrp-3.2.1-0-gts28wifi.img.tar
http://build.twrp.me/twrp-3.2.1-0-gts28ltexx.img
http://build.twrp.me/twrp-3.2.1-0-gts28ltexx.img.tar
Click to expand...
Click to collapse
Hi! I tested gts28wifi for my SM-T700 but touch sensor is wrong. The interface is unusable for now. Best of luck. But you should start your own thread...

powerade001 said:
Hi! I tested gts28wifi for my SM-T700 but touch sensor is wrong. The interface is unusable for now. Best of luck. But you should start your own thread...
Click to expand...
Click to collapse
ripee said:
Sorry for intruding again, but we are about to get official TWRP support! I've been asked to test the "release candidate" images. As I don't have either a gts28wifi or gts28ltexx, I'd like to post the links here and ask for feedback. I'll create a separate TWRP thread once I confirm that these twrp builds work. I apologize again:
What would be the point of a dedicated thread if it doesn't work? Anyway, thanks for your feedback.
Click to expand...
Click to collapse

ripee said:
ripee said:
Sorry for intruding again, but we are about to get official TWRP support! I've been asked to test the "release candidate" images. As I don't have either a gts28wifi or gts28ltexx, I'd like to post the links here and ask for feedback. I'll create a separate TWRP thread once I confirm that these twrp builds work. I apologize again:
What would be the point of a dedicated thread if it doesn't work? Anyway, thanks for your feedback.
Click to expand...
Click to collapse
The point is,..
If your building it, wouldn't you want it all together so you could track it easier? Now you'll need to read all the threads that you've posted this into to find the results.
I know we all appreciate you doing this. But please make your own thread for it so we can all see what's going on. Without having to read through the 4+ threads this is in.
Keep it up. It's nice to see our tabs still getting some love. Thank you. ?
Click to expand...
Click to collapse

engine95 said:
ripee said:
The point is,..
If your building it, wouldn't you want it all together so you could track it easier? Now you'll need to read all the threads that you've posted this into to find the results.
I know we all appreciate you doing this. But please make your own thread for it so we can all see what's going on. Without having to read through the 4+ threads this is in.
Keep it up. It's nice to see our tabs still getting some love. Thank you.
Click to expand...
Click to collapse
Is it possible to make android oreo??
What are the basic requirements for it??
Click to expand...
Click to collapse