Help me how solve Restart problem phone fully on and show Force to close and reboot
I DO
Factory reset
Flash Firmware with pit without pit NC2 Firmware
But condition same after write kernel and modem now imei damage too
help me how solve that problem
Any Solution ?
Still waiting for solution anyone share stock working firmware for N900A
some one share Custom rom in tar format
Related
Hi, I have a GSM Samsung Galaxy S here that is running CyanogenMod.
The phone is rebooting at random and getting stuck at the skateboarding CyanDroid during boot.
It still runs sometimes and I can flash other roms through clockwork or ROMManager.
How can I restore it to a factory ROM and firmware?
When I try to use *#1234# to find what firmware it has it, it says "Connection problem or invalid MMI code." does that code only work with stock firmware?
Any help or advice would be greatly appreciated.
Thanks,
ANKh
I would use Odin to reflash to a standard Samsung ROM and start again. Maybe first make a backup of all your data, because that will be lost (internal).
Ankhwatcher said:
Hi, I have a GSM Samsung Galaxy S here that is running CyanogenMod.
The phone is rebooting at random and getting stuck at the skateboarding CyanDroid during boot.
It still runs sometimes and I can flash other roms through clockwork or ROMManager.
How can I restore it to a factory ROM and firmware?
When I try to use *#1234# to find what firmware it has it, it says "Connection problem or invalid MMI code." does that code only work with stock firmware?
Any help or advice would be greatly appreciated.
Thanks,
ANKh
Click to expand...
Click to collapse
download the stock firmware from samfirmware.com .. then flash it using odin ..
Go back to stock (can download stock firmware's from sammobile.com) and then flash another rom it could be a problem from the rom itself
Remember to use .PIT file! and check that repartition is ticked.
Shame Heimdell can't also make an image ready for backup later too,
I'd prefer to do that than downloading from some server I've no clue where it's coming from and might do a megaupload at any point
Erakko said:
Remember to use .PIT file! and check that repartition is ticked.
Click to expand...
Click to collapse
What if I have the I9000M_JL2_JL2_JL2_JL2_UG_BMC.zip containing only the I9000UGJL2_homebinary_add_param.tar file?
Is there any need to tick the repartition option?
i think this is a PDA file and it would be ill advised to tick the repartition option.
But I just need to confirm before restoring from JB CM10
hello guys, i need your help.. i have samsung galaxy note N7000 brick phone because stuck on galaxy note gt-n7000 screen. i can access download mode and no recovery. i flashed any firmware version it stuck at factoryfs.img.. i flash any kernel it says fail, i flashed pit file stuck at set partition. what should i do?? every time i flash custom binary download will count.. what should i do? please someone kindly tell me the guide to solve this problem.. :crying::crying:
mohd syafik said:
hello guys, i need your help.. i have samsung galaxy note N7000 brick phone because stuck on galaxy note gt-n7000 screen. i can access download mode and no recovery. i flashed any firmware version it stuck at factoryfs.img.. i flash any kernel it says fail, i flashed pit file stuck at set partition. what should i do?? every time i flash custom binary download will count.. what should i do? please someone kindly tell me the guide to solve this problem.. :crying::crying:
Click to expand...
Click to collapse
1) What Firmware Did You Use When This Problems Coming?Is It Stock ICS?
2)Please Give More Details About Firmware You Use...
mohd syafik said:
hello guys, i need your help.. i have samsung galaxy note N7000 brick phone because stuck on galaxy note gt-n7000 screen. i can access download mode and no recovery. i flashed any firmware version it stuck at factoryfs.img.. i flash any kernel it says fail, i flashed pit file stuck at set partition. what should i do?? every time i flash custom binary download will count.. what should i do? please someone kindly tell me the guide to solve this problem.. :crying::crying:
Click to expand...
Click to collapse
Try a Gingerbread firmware and the firmware should contain all the three files seperate. Like the code modem and pda.. and then flash it.. it will help
Hit Thanks
Sent from my GT-N7000 using xda app-developers app
NoteboyTech said:
Try a Gingerbread firmware and the firmware should contain all the three files seperate. Like the code modem and pda.. and then flash it.. it will help
Hit Thanks
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
i have try GB firmware that contains all files the result still same.. i don't know what to do
hazwan708 said:
1) What Firmware Did You Use When This Problems Coming?Is It Stock ICS?
2)Please Give More Details About Firmware You Use...
Click to expand...
Click to collapse
i use firmware JB XME from malaysia and GB firmware that contains all files pda,csc and modem still stuck at factoryfs.img..
i flash pit file 16GB stuck at set partition, i flash any safe kernel,odin shows fail...:crying::crying:
mohd syafik said:
i use firmware JB XME from malaysia and GB firmware that contains all files pda,csc and modem still stuck at factoryfs.img..
i flash pit file 16GB stuck at set partition, i flash any safe kernel,odin shows fail...:crying::crying:
Click to expand...
Click to collapse
If you stuck at factoryfs.img then you device is bricked.
Replace the motherboard
or
try the workaround (and it is only that) with the repartition method described in hg42's thread.
ThaiDai said:
If you stuck at factoryfs.img then you device is bricked.
Replace the motherboard
or
try the workaround (and it is only that) with the repartition method described in hg42's thread.
Click to expand...
Click to collapse
still same.. i flash pit file from hg42 thread stuck on set partition..
here i attaches the image
How will it move ahead? You have not selected any PDA files to flash.
And why did you flash that PIT file? Have you done any scans using the scanners found in that thread to determine the bad blocks?
ENter all the 3 files without PIT! and tell again!
Hey everyone I'm in need of assistance of flashing the above phone(not mine). I can't turn the phone on due to an update that I can assume corrupted the ROM or something of the sort. I can get into DL mode but this is what I get when turning the phone on normally- imgur.com/Jrk8nKT
I have found a stock telstra ROM for the phone but as soon as I try to flash it with Odin it says "there is no pit partition" but I am lost as to where to find a pit file.
If anyone could help or has any ideas I would be extremely grateful.
Thanks!
NightlyBuzz said:
Hey everyone I'm in need of assistance of flashing the above phone(not mine). I can't turn the phone on due to an update that I can assume corrupted the ROM or something of the sort. I can get into DL mode but this is what I get when turning the phone on normally- imgur.com/Jrk8nKT
I have found a stock telstra ROM for the phone but as soon as I try to flash it with Odin it says "there is no pit partition" but I am lost as to where to find a pit file.
If anyone could help or has any ideas I would be extremely grateful.
Thanks!
Click to expand...
Click to collapse
I've already saw many people saying to dont do nothing with pit and repartition unless its your last resource. I dont have much knowledge about it, so i would recomme d you flash a 4.1.2 rom via odin and then enter recovery mode (vol up + home button + power button) and wipe data, maybe you succed.
One question, u said you can enter in download mode, but can you actually flash something via odin? I reccomend you try to flash the galaxy project with android 4.1.2 and see what odin says. I had a problem once and odin didnt flash anything unless this rom i mentioned, but via cwm. After that i reinstalled the pc drivers and installed triangle away from chainfire, reset the counter with that and tried flash a stock rom via odin again and this time it worked
Hello all developers
the problem start when my friend ask me to fix his mobile
the first look to the mobile is
when i click power on it's show Samsung logo with this word at the left top( recovery booting ... )then reboot after 2 seconds at-least
i have download the latest official Rom 5.1.1 from sammobile
N910TUVU2DOK2_N910TTMB2DOK2_N910TUVU2DOK2_HOME
after flash with odin i remember that is must complete the installation after first reboot with android logo but there is nothing happened !! its always reboot with the same word ( recovery rebooting )
I have tired to flash many Roms
Many BL
Many Modem
try to flash PIT File and the same
try Emergency with Kies and nothing changed
Kies give me this information when i put the model
PDA : OK2 / CSC : OK2 / PHONE : OK2 (TMB)
the all info about this mobile :
Model : SM-N910T
S/N : RF8FC131QYY 14.12
IMEI : 356095064430028
when i enter Odin Mode thats appear
ODIN MODE (HIGH SPEED)
PRODUCT NAME : SM-910t
CURRENT BINARY : SAMSUNG OFFICIAL
SYSTEM STATUS : CUSTOM
REACTIVATION LOCK : OFF
KNOX WARRANTY VOID : 0x1 (4)
QUALCOMM SECUREBOOT : ENABLE (CBS)
RP SWREV : S1, T1 , R1 , A2 , P1
SECURE DOWNLOAD : ENABLE
UDC START
please help me to fix it with any rom ... I can't go recovery mode but i can go download mode with ODIN
Any help please
i have the same issue but im on verizon. Also kies doesnt recognize my phone and I can't get to recovery. Any help would be appreciated. otherwise i just have an expensive paperweight.
Download n910t pit file and flash the pit file with the firmware. Make sure repartiton is checked. And let it reboot without pulling the the usb out.. the first thing it always does after odin to stock is reboot to recovery....are you getting any errors when you try to flash the firmware? Download this firmware. It is untouched full stock wipes everything
https://mega.nz/#!asRzgCYb!f8ssb_v6zDxYJ8_u1ygzpothj1arjRmMdM_opGz8QO0
Had the same issue i tried all kinds of roms stock and custom nothing seemed to work bought a new battery didnt make a diff now my phone is dead
noob4598 said:
Download n910t pit file and flash the pit file with the firmware. Make sure repartiton is checked. And let it reboot without pulling the the usb out.. the first thing it always does after odin to stock is reboot to recovery....are you getting any errors when you try to flash the firmware? Download this firmware. It is untouched full stock wipes everything
https://mega.nz/#!asRzgCYb!f8ssb_v6zDxYJ8_u1ygzpothj1arjRmMdM_opGz8QO0
Click to expand...
Click to collapse
Can you share PIT file for 910t? My phone is just keep bootcycle no matter what I do with ODIN, and try to flash ROM after ODIN, it bombs out, and boot cycle...
Thanks.
I am stuck with the same thing
any help would be great I am some what of a noob to this
Anyone had luck solving this problem?
noob4598 said:
Download n910t pit file and flash the pit file with the firmware. Make sure repartiton is checked. And let it reboot without pulling the the usb out.. the first thing it always does after odin to stock is reboot to recovery....are you getting any errors when you try to flash the firmware? Download this firmware. It is untouched full stock wipes everything
https://mega.nz/#!asRzgCYb!f8ssb_v6zDxYJ8_u1ygzpothj1arjRmMdM_opGz8QO0
Click to expand...
Click to collapse
Link plz
waleedy said:
Link plz
Click to expand...
Click to collapse
I'm having the same problem. I'm not getting any errors, and I found and flashed the PIT file with the stock firmware. Still no boot. It just sits on the boot up screen. No recovery, no battery icon...no nothing.
Guys,
I need an urgent help. Here is my Story..
Using 9208 Note 5 model. After trying different custom roms i tried to flash stock firmware using Odin. Did everything correctly. Unfortunately i checked Nand Erase all option too. The result is my Note 5 stuck at Samsung DimDim logo. For almost 1 hour. Tried reflash several times but no luck..
So i flashed twrp and wipe data and factory reset and reboot. Its works. But problem with voLTE. No voLTE working. I know flashing JIO voLTE fix will solve this but i need a solution for this Odin. I dont want to flash voLTE fix.
Can someone help me pls.. How to bypass that Samsung logo without flashing Twrp.. ?
Rajeev said:
Guys,
I need an urgent help. Here is my Story..
Using 9208 Note 5 model. After trying different custom roms i tried to flash stock firmware using Odin. Did everything correctly. Unfortunately i checked Nand Erase all option too. The result is my Note 5 stuck at Samsung DimDim logo. For almost 1 hour. Tried reflash several times but no luck..
So i flashed twrp and wipe data and factory reset and reboot. Its works. But problem with voLTE. No voLTE working. I know flashing JIO voLTE fix will solve this but i need a solution for this Odin. I dont want to flash voLTE fix.
Can someone help me pls.. How to bypass that Samsung logo without flashing Twrp.. ?
Click to expand...
Click to collapse
Well that's because you erased everything including your partitions so now you need to find the .PIT file for your exact model and select it in odin while flashing the firmware again.
MrMike2182 said:
Well that's because you erased everything including your partitions so now you need to find the .PIT file for your exact model and select it in odin while flashing the firmware again.
Click to expand...
Click to collapse
Thanks bro. I found mine. So there is option to choose PIT in Odin ?
@MrMike2182
Thanks alot for saving me. Now everything works perfect. Thanks again..
Rajeev said:
Thanks bro. I found mine. So there is option to choose PIT in Odin ?
@MrMike2182
Thanks alot for saving me. Now everything works perfect. Thanks again..
Click to expand...
Click to collapse
It should be in the options tab.
MrMike2182 said:
It should be in the options tab.
Click to expand...
Click to collapse
Yea i fixed it bro. Thanks bro
How did you get your partitions back?
dallen5 said:
How did you get your partitions back?
Click to expand...
Click to collapse
That's what the PIT file does.
dallen5 said:
How did you get your partitions back?
Click to expand...
Click to collapse
Download PIT file for ur exact model number from Samsung website and flash it via ODI with Firmware.
MrMike2182 said:
Well that's because you erased everything including your partitions so now you need to find the .PIT file for your exact model and select it in odin while flashing the firmware again.
Click to expand...
Click to collapse
My S7 edge stuck in bootloop sometimes No Command and Fail to open recovery_cause (No such file or directory) after Android 8.0 update, i do the every solution provided on the internet but its not done. After watch your thread i understand what is happening with my phone and i want to do the Nand Erase & Re-Partition for the same.
please help me to find the .pit file for erase nand and re partition.
Your support will save my phone.
Millions of thanks.
Amolxp said:
My S7 edge stuck in bootloop sometimes No Command and Fail to open recovery_cause (No such file or directory) after Android 8.0 update, i do the every solution provided on the internet but its not done. After watch your thread i understand what is happening with my phone and i want to do the Nand Erase & Re-Partition for the same.
please help me to find the .pit file for erase nand and re partition.
Your support will save my phone.
Millions of thanks.
Click to expand...
Click to collapse
I need to know the firmware version that you were on before this problem started.. The PIT file is always inside of the firmware you download all you need to is unzip it from within the .zip..
MrMike2182 said:
I need to know the firmware version that you were on before this problem started.. The PIT file is always inside of the firmware you download all you need to is unzip it from within the .zip..
Click to expand...
Click to collapse
Thanks for your kind response, after update of the firmware current version is G935FXXS4ESC6 and before update G935FXXS3ERJ2 and i forgot the previous version of Android 7.0. Can downgrade of Android version will fix the same, if yes please let me know how to downgrade the android version.
Thanks you so much
Amolxp said:
Thanks for your kind response, after update of the firmware current version is G935FXXS4ESC6 and before update G935FXXS3ERJ2 and i forgot the previous version of Android 7.0. Can downgrade of Android version will fix the same, if yes please let me know how to downgrade the android version.
Thanks you so much
Click to expand...
Click to collapse
You can only downgrade if you have firmware that's bootloader version 4 because you're currently on bootloader version 4 and you cannot go back down to bootloader version 3 or earlier because that's been blocked by Sammy.. If you need the PIT file it's inside of the firmware that you downloaded you just need to extract it from the file. If you have the firmware G935FXXS4ESC6 then unzip it and then unzip them again and you'll find the PIT file in there.. It's usually inside of the CSC .tar file.
MrMike2182 said:
You can only downgrade if you have firmware that's bootloader version 4 because you're currently on bootloader version 4 and you cannot go back down to bootloader version 3 or earlier because that's been blocked by Sammy.. If you need the PIT file it's inside of the firmware that you downloaded you just need to extract it from the file. If you have the firmware G935FXXS4ESC6 then unzip it and then unzip them again and you'll find the PIT file in there.. It's usually inside of the CSC .tar file.
Click to expand...
Click to collapse
Thanks for your kind support, as per your suggestion after unzip the csc file i found the pit file . Now should i select Nand Erase & Re-Partition options after inserting the pit file. Is it safe to select these options?
I have flash so many time with same firmware, flashing was ok but still i'm facing same problem.
Millions of Thanks
Amolxp said:
Thanks for your kind support, as per your suggestion after unzip the csc file i found the pit file . Now should i select Nand Erase & Re-Partition options after inserting the pit file. Is it safe to select these options?
I have flash so many time with same firmware, flashing was ok but still i'm facing same problem.
Millions of Thanks
Click to expand...
Click to collapse
You can do that yes and if that doesn't fix your problem then there must be something wrong with the phone itself. For your information though you're asking for help in the Galaxy Note 5 thread but you're on a Galaxy S7 Edge.. I do think a moderator might end up moving this to the correct place.