@stargo ported CM12 to the OMAP4-common family of devices a few months ago and it has finally hit official status!
Downloads:
Official CM builds
PA Gapps
Stargo's builds (old and unofficial)
ddggttff3's unofficial cm12.1 builds
Installation:
You need to install the NEW SafeStrap with SELINUX support which can be found here. There is a README saying how to use and install the safestrap.
Upgrading:
Nuke system and caches and flash. If you have constant force closures when rebooting then you need to wipe data because there is a lot of changes being made since CM12 is still in early development.
Credits:
@stargo for porting CM12 and maintaining OMAP4 repos with @alteredlikeness
@Hashcode and @dhacker29 for all of their amazing work for OMAP4
Bugs:
Excessive CPU use and general lags here and there.
The easter egg is broke so it's impossible to get points.
Probably other things.
I'm using this as a daily and it's honestly not that bad.
Extras:
If you want to enable nav bar you must add a line to build.prop and save it then reboot. A 0=nav bar while a 1=no nav bar. This line will be baked into my builds for convenience sake.
qemu.hw.mainkeys=0
#########################
For stargo builds:
A temporary patch for working LTE:
Flash this and use voice dialer (it's a preinstalled apk) and say "open APNs" and select "VZWINTERNET" and hit home. This needs to be done on each boot and can be quirky but it's a workaround. I'll try to permanently fix this but no promises.
^this APN zip is complements of @tonyt.
#########################
Be sure that before reporting any bugs that you perform a CLEAN install on a fresh ROM slot and that you pull a logcat and paste it to pastebin so that we don't clog the thread with useless repetitive bug reports and long logcats that take up half the page. Thanks.
I've recently upgraded my phone and still have my bionic lying around. I'm more than happy to flash and test for people. I won't be able to test data, but can help with anything else. Thanks for the thread!
Sent from my LG-VS985 using XDA Free mobile app
zebinadams said:
I've recently upgraded my phone and still have my bionic lying around. I'm more than happy to flash and test for people. I won't be able to test data, but can help with anything else. Thanks for the thread!
Sent from my LG-VS985 using XDA Free mobile app
Click to expand...
Click to collapse
Sounds good bud. Cm12 has its hangups but if you keep recents/RAM clean it runs great. Everything works other than torch. APNs are a bit screwy and need to be reapplied on each boot. I just got home from Christmas out of state so give me a lil while to unpack and if I don't fall asleep I'll update the OP [emoji14]
Tap'd by my Lollerpoped Bionic
I heard there were some pretty significant changes to CM12 over the past week. @gabhroo123 is there any chance you could fire off a new build for targa?
The Doctor04 said:
I heard there were some pretty significant changes to CM12 over the past week. @gabhroo123 is there any chance you could fire off a new build for targa?
Click to expand...
Click to collapse
Wasn't stargo the one who's shipping builds? I have cm12 source in my trash bin so I could always bring that back and sync up to date and use his local manifest to ship builds. My dev box gets about 2hr clean build times. I'm no wizard dev or anything most the ROMs I do are ports using existing device trees or post build unpacking/repacking zip kangs.
Tap'd by my Lollerpoped Bionic
@stargo is maintaining the builds from my understanding, but @gabhroo123 was just building from source to capture the latest changes and firing off builds while stargo was in hiatus. If you are able to crank out a build, that would be cool. I was just curious to see what the latest changes were
The Doctor04 said:
@stargo is maintaining the builds from my understanding, but @gabhroo123 was just building from source to capture the latest changes and firing off builds while stargo was in hiatus. If you are able to crank out a build, that would be cool. I was just curious to see what the latest changes were
Click to expand...
Click to collapse
Right on then lol I'll sync up again in a few hours cuz I'm in town and try to ship out a build. Like I said, I have most of the cm12 repo in my trash so it won't take that long plus I have good internet [emoji14] I'll be able to debug a bit but don't expect any magical fixes if stuff breaks and stargo doesn't get to it first
Tap'd by my Lollerpoped Bionic
Oggie7797 said:
Right on then lol I'll sync up again in a few hours cuz I'm in town and try to ship out a build. Like I said, I have most of the cm12 repo in my trash so it won't take that long plus I have good internet [emoji14] I'll be able to debug a bit but don't expect any magical fixes if stuff breaks and stargo doesn't get to it first
Tap'd by my Lollerpoped Bionic
Click to expand...
Click to collapse
@Oggie7797 Here is the Lolipop Gapps zip. Might want to ad to OP.
http://d-h.st/xC1T
ax562 said:
@Oggie7797 Here is the Lolipop Gapps zip. Might want to ad to OP.
http://d-h.st/xC1T
Click to expand...
Click to collapse
No I'm gonna link PA gapps because it gives you options. Btw my CM12 source is 29.1GB so it's taking forever to get out of the trash
Edit:
I updated OP and will start building in a bit
It took me a few to realize that I forgot to update my build environment for lollipop....building now though. I can clean build kitkat ROMs in about 2 hours bit with lollipop being so freaking big it may take longer. Regardless, keep an eye out for stargo builds or keep checking my gdrive folder for my builds.
Major thanks to @stargo !!!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Tap'd by my Lollerpoped Bionic
@Oggie7797 is there a cliff notes version of how to pull down a build? My Linux laptop isn't doing much right now, never really thought of doing it myself until I saw your screen shot I will keep checking your gdrive in the mean time. Thanks bud
The Doctor04 said:
@Oggie7797 is there a cliff notes version of how to pull down a build? My Linux laptop isn't doing much right now, never really thought of doing it myself until I saw your screen shot I will keep checking your gdrive in the mean time. Thanks bud
Click to expand...
Click to collapse
Not really....there's random guides everywhere but not a good beginning to end especially for LP. Most tell you how to setup build environment but after that you're on your own lol battling errors etc...what's your specs? Mine builds good but I need a RAM upgrade haha I always see folks with donate buttons so figured "screw it" and added one of my own for that purpose xD
Oggie7797 said:
Not really....there's random guides everywhere but not a good beginning to end especially for LP. Most tell you how to setup build environment but after that you're on your own lol battling errors etc...what's your specs? Mine builds good but I need a RAM upgrade haha I always see folks with donate buttons so figured "screw it" and added one of my own for that purpose xD
Click to expand...
Click to collapse
Buddy:
Thanks so much for your build, it keeps my XT875 alive,
I just want to report you that I flashed rom for cm-12-20141223-UNOFFICIAL-targa.zip , overall it is good, just some lag and battery life normally.
The most important is I can not get LTE DATA on Verizon network, it tells me I am staying on Verizon Wireless, but I could not get connected to LTE DATA
Are you going to fix it or you know something about this?
Thanks and really appreciate your work!
rfresh said:
Buddy:
Thanks so much for your build, it keeps my XT875 alive,
I just want to report you that I flashed rom for cm-12-20141223-UNOFFICIAL-targa.zip , overall it is good, just some lag and battery life normally.
The most important is I can not get LTE DATA on Verizon network, it tells me I am staying on Verizon Wireless, but I could not get connected to LTE DATA
Are you going to fix it or you know something about this?
Thanks and really appreciate your work!
Click to expand...
Click to collapse
Thanks but please read the OP that is stargo's build not mine (im building now) wait a minute and i'll post a somewhat patch for that. on post #3
Edit:
Updated post #3
Thanks so much and I will try whatever you have and report back, waiting...
rfresh said:
Thanks so much and I will try whatever you have and report back, waiting...
Click to expand...
Click to collapse
Sorry guys for the delay was out with the family but i just ran make clean and i'm doing a complete fresh build that will take a few hours. I'll post when it finishes. If it fails then that means I will have to trash the entire repo and repo init and sync all 30gb again :/ cross your fingers lol
Oggie7797 said:
Not really....there's random guides everywhere but not a good beginning to end especially for LP. Most tell you how to setup build environment but after that you're on your own lol battling errors etc...what's your specs? Mine builds good but I need a RAM upgrade haha I always see folks with donate buttons so figured "screw it" and added one of my own for that purpose xD
Click to expand...
Click to collapse
I have an old Dell Latitude, but it is running Ubuntu 14.10. It is a little slow at times, and I can't stream video very well because of how slow it is. But, it gets the job done.
Oggie7797 said:
Not really....there's random guides everywhere but not a good beginning to end especially for LP. Most tell you how to setup build environment but after that you're on your own lol battling errors etc...what's your specs? Mine builds good but I need a RAM upgrade haha I always see folks with donate buttons so figured "screw it" and added one of my own for that purpose xD
Click to expand...
Click to collapse
Oggie7797 said:
Sorry guys for the delay was out with the family but i just ran make clean and i'm doing a complete fresh build that will take a few hours. I'll post when it finishes. If it fails then that means I will have to trash the entire repo and repo init and sync all 30gb again :/ cross your fingers lol
Click to expand...
Click to collapse
Any updates boss?
Related
Credits:
cyanogen of course for the source
Chad and tiny for the kernel
workshed, conap and gnarlyc for their help getting me started and answering all my questions
Bobcat331 and scotty85 for testing, contributing and instigating me.
CUViper and PonsAsinorem for the BlueTooth fix
The entire Eris community for their support and contributions along the way.
This is a modified and tweaked version of CM7. Features chad's Incredikernel with smartass v2. It also now uses ICS Roboto font.
Dalvik and cache wipe only should be fine for most.
Condemned CM7 V15
Thanks to goo-inside.me for the file hosting
CyanogenMod merged changelog
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
6-21-12 - resync with cm source, wifi fixed
6/2/12 - resync with CM source
3/4/12 - Resync with CM source, fix market issues and missing shared lib
errors, fix mod version in build.prop to reflect V13
2/3/12 - Resynced with CM source.
1/14/12 - Resynced with CM source.
1/08/12 - Resynced with CM source. Removed Stripped 2 Hell version for now.
Adjusted tweaks and build prop. See CM changelog for full source
changes.
11/05/11 - Some tweaks adjustments and added BT fix from Pons and CUViper
10/23/11 - updated to CM7.1 Stable, Change to ICS Roboto font, added S2H version, more tweaks including portions of Dsextons universal adrenaline shot, updated to 10/08 incredikernel, removed 3d Gallery in place of QuickPic
8/13/11 - resynced with CM Source, added Juwe11's RamScript
7/12/11 - resynced with CM Source, modded build prop and boot image, changed boot animation.
6/30/11 - resynced with CM Source. Upgraded to chad's latest kernel.
As always What you do to your device is your choice not mine. If anything happens to your device it's your problem not mine.
Enjoy
Reserved...
Sent from my ADR6300 using XDA App
Reserved
Sent from my ADR6300 using XDA App
What are the differences between this and CM7?
Sent from my ADR6300 using XDA App
masully1984 said:
What are the differences between this and CM7?
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
Yeah what tweaks of your own did you add?
Sent from my ADR6300 using XDA Premium App
Hey Condemned nice to see you over here on this side bro! I remember you from when I had the Eris.
EDIT: This guy was one of the best Devs for the Eris. Don't be surprised of you see some good stuff coming from him for the DINC.
masully1984 said:
What are the differences between this and CM7?
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
theguitarguy58 said:
Yeah what tweaks of your own did you add?
Sent from my ADR6300 using XDA Premium App
Click to expand...
Click to collapse
I really haven't run the nightlies here... (just got my Dinc this past weekend). But all I see are 7.0.3 which seems strange but no matter. The main reason I went CM for now is to get myself accustomed with the Inc and I'm used to CM from the Eris. This is CM7.1 and I'm using chad's kernel instead of CM. It seemed a little smoother to me for now. I also increased SD Card read/write speed as well as added the local.prop file to help with any LauncherPro fans. I personally like ADW EX but everything is a matter of opinion and preference. Another thing was change wifi scan intervals to help save a little on the battery and I'm still experimenting with a few other things but I probably won't have them nailed down before the next update seeing that RC1 has now been merged. I'll be updating this ROM sometime tomorrow at this point now lol.
wildstang83 said:
Hey Condemned nice to see you over here on this side bro! I remember you from when I had the Eris.
EDIT: This guy was one of the best Devs for the Eris. Don't be surprised of you see some good stuff coming from him for the DINC.
Click to expand...
Click to collapse
How you been stang? Looks like you're doing pretty well over here . I'm gonna be checking that ROM out soon once I get things under way a little more. I'm planning to do a stripped version of this like I did for the Eris and I'm thinking I might do the Ghost Rider version of it as well. The Eris is still active too so I'll be bouncing back and forth from here to there alot lol.
I'd hardly say one of the best but thanks for the boost I'm still pretty green and shed and conap have really taught me alot
Applies palm on face...
davwman said:
Applies palm on face...
Click to expand...
Click to collapse
Why do that?
Sent from my ADR6300 using XDA App
davwman said:
Applies palm on face...
Click to expand...
Click to collapse
Laughs... I expect these comments and really don't care apply what you'd like where you'd like. It will always have the same end result.
Sent from my ADR6300 using XDA App
CondemnedSoul said:
But all I see are 7.0.3 which seems strange but no matter.
Click to expand...
Click to collapse
Plenty of CM fans here and 7.1 for the Inc. is alive and well in this thread:
http://forum.xda-developers.com/showthread.php?t=916881
I guess my comment was taken the wrong way. I made the comment for all the haters getting ready to bash the rom. I for one applaud another developer joing the incredible force.
davwman said:
I guess my comment was taken the wrong way. I made the comment for all the haters getting ready to bash the rom. I for one applaud another developer joing the incredible force.
Click to expand...
Click to collapse
I guess it was mistaken then as I expect the bashing but like I said don't care lol. My apologies for mistaking your comment.
no offense taken.
Yea man we got some seriously sik devs over on the Inc man. I've been working fairly close with a couple of them newtoroot and joelZ9614. They've been really good at helping me get a start on my port.
But yea I definitely miss workshed and Tazzpatriot. Those guys are the reason I had the Eris so long.
And Conap, well Conap was the first dev ever to teach me anything about Android. That guy has been at it for a really long time.
Anyways, yea man check out pure speed and let me know whats up and I'll do the same.
Welcome! Always have some love for another CM-based dec. Especially one like yourself with experience and class (giving out credit where due)
Sent from my ADR6300 using Tapatalk
wildstang83 said:
Yea man we got some seriously sik devs over on the Inc man. I've been working fairly close with a couple of them newtoroot and joelZ9614. They've been really good at helping me get a start on my port.
But yea I definitely miss workshed and Tazzpatriot. Those guys are the reason I had the Eris so long.
And Conap, well Conap was the first dev ever to teach me anything about Android. That guy has been at it for a really long time.
Anyways, yea man check out pure speed and let me know whats up and I'll do the same.
Click to expand...
Click to collapse
I'll definitely be checking it out man. Working on a resync now and updating the Eris ROM's as well lol.
pronghornrunner said:
Welcome! Always have some love for another CM-based dec. Especially one like yourself with experience and class (giving out credit where due)
Sent from my ADR6300 using Tapatalk
Click to expand...
Click to collapse
I always try to give credit. Sometimes I might miss some but I'll fix it when I see it lol.
Thanks for the pleasant welcome. Hopefully this forum will be as fun as the Eris forum
Cool ROM!!
CS does excellent work. those of us with an eris know this allready condemned cm7 is the smoothest and fastest rom my lil eris has ever run.
B-S is running great for me,and i cant wait to see what you come up with hear in the future. makes me super happy to see you growing and expanding into other devices
next step is to get you a TB
this rom is smooth and solid.
Team Horizon presents XenonHD
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Base : Jelly Bean 4.3.1 JLS36I : FULL AOSP BASE FROM SOURCE.
It's Rockstable,Blazing fast.
and now Buttery Smooth too!
[PLEASE REMEMBER TO CLEAR DALVIK/CACHE (AND FACTORY RESET AND SYSTEM IF YOU'RE USING THIS ROM FOR THE FIRST TIME) BEFORE FLASHING! Everything will run smoother for you that way If things still don't work as they should, wipe system and reflash.
This ROM is for unlocked devices only ... flashing with Safestrap will not work, as this uses a (close to) AOSP kernel!
Please use the latest 4.2.2 gapps with this ROM - nothing else will work as it should. This means the 20130301 CM version found on goo.im.
Features:
XT925 Version is HERE RIGHT NOW!! With working data!
JB 4.3.1 JLS36I
Rooted
Busybox
Miscellaneous:
Pie is back!
Gestures!
Lock Screen gestures too!
Active Display!
Customizable color in SunBeam LWP!
Custom animations!
Dark XenonHD!
Onager 2.0!
Profiles!
Hiding status bar
Screenshot instant trash
Network speed indicator
Split screen multitasking!
Expanded power menu!
Notification Toggles!
CPU Dev Mode overlay!
Theme Chooser support!
Volume rocker wake and seek music tracks!
DSPManager save/load settings!
Focal camera as an extra!
Apollo Music player added and fixed for JB!
XenonHD wallpapers!
Wi-fi scan time to 180 to save battery.
Performance, battery life and other misc tweaks.
Init.d support with added tweaks and scripts.
Superuser application for root.
CM File manager added.
Build.prop tweaks.
Battery life tweaks.
Some secret tweaks.
And much much more!. Flash and see.
Download in post #2
Changelog in post #3
Screen shots in post #4
Team Horizon:
Adam80460
iceandfire
TheBr0ken
pr0xy man1Ac
pcarenza
T-Macgnolia
Thanks to:
AOSP
Cyanogenmod
AOKP
Peter Alfonso
Daxxmax
CarbonDev
ParanoidAndroid
razrqcom-dev-team (dhacker29, hashcode, epinter!)
Source:
Github
Downloads
Download: Bugs: Occasional sensor malfunction (VERY occasional)
http://xenonhd.com/downloads
Gapps:
http://goo.im/gapps
Clean wipe is recommended with v9.0!
Official XenonHD site:
http://www.xenonhd.com/
XenonHD Settings backup tool:
https://play.google.com/store/apps/d...om.xehd.backup
Please read this before asking dumb questions again and again:
http://forum.xda-developers.com/show....php?t=2075368
Join our community on Google+:
https://plus.google.com/communities/...22179967248992
==================================================
Important please read
I. Appreciation
There are many ways to show your support to us. You can:
Press the "Thanks" button.
Hit the donation button and help support the team
Wear our specially prepared banner
Share your opinion about my work and write some feedback in our threads.
Advertise our work to your friends, family, anyone who owns this device.
Rate our threads with 5 stars.
We appreciate all the support you give us, but we don't expect anything
Click to expand...
Click to collapse
II. Sharing
XDA-Developers.com is all about sharing. If you would like to use any part of our work, please feel free to do so but remember to do the following beforehand:
Inform - Please send us a PM or email telling us
Permission - Please, if you do not have permission from us, don't use it. Most of the time, we will allow you to, but if you don't get our permission first, we will report.
Credits - No one wants their work stolen. Please remember to give proper credits when using our work.
Click to expand...
Click to collapse
:
III. Support
If you have any issues or questions, please feel free to post them in the our threads. However, because all of us have social lives outside of XDA, your questions may not always be answered right away. Members who are more experienced in our work, please help out the ones who don't.
If you want to get the fastest and the best answer - ask the question in our threads instead of PM'ing us. Chances are, other users will be able to help you when Team Members don't have the time to.
Click to expand...
Click to collapse
IV. Updates
We are a busy team! Every Team Member has lives outside of XDA. You cannot expect us to sit in front of the computer all day and develop Android. Please do not ask for ETA's. The update will come when we release it. Sometimes, there is a good reason for why we have not released an update in a while. Please be patient with us, we will do as we promise. Updates will come.
Click to expand...
Click to collapse
V. Responsibilities
We are not responsible for your device! We do not guarantee that everything will work the way it's supposed to. Not every device is created equal, what might work on our devices may not work on yours or vice versa. Please be a responsible person when it comes to flashing. This is a mature site, don't act immaturely when your device becomes problematic. If you cry and blame us for "destroying" your device, we will laugh at you. Your device is your responsibility, act like it.
Thanks for choosing Team Horizon, we hope you enjoy our works as much as we enjoy working with them.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
CHANGELOG
Official changelog is at:
http://www.xenonhd.com/blog.html
nice nice, i am waiting for it
---------- Post added at 07:50 AM ---------- Previous post was at 07:49 AM ----------
just a quick question, for learning purposes what are Toro, Maguro, and Tuna?
Nexus devices
Nice to see u working on all the Motorola Qualcomm devices hope u start ur Atrix build keep up the good work so far best rom around here
Sent from my MB886 using xda premium
sickkside13 said:
Nice to see u working on all the Motorola Qualcomm devices hope u start ur Atrix build keep up the good work so far best rom around here
Sent from my MB886 using xda premium
Click to expand...
Click to collapse
I shall begin working on the MB886 very soon!
XT925 version is now available! Please see post 2 for the download link!
Man i can't wait for the mb886 build i love ur rom i running it on my nexus 2 . Keep up the good work
Sent from my MB886 using xda premium
Can't wait for Atrix HD either
Sent from my MB886 using xda app-developers app
Good grief do you guys lurk in the 925 section a lot?
beautiful ROM, i like it, i think it will be my DD, a question though, my WiFi is not connecting automatically, it supposed to, when i open the wifi settings, the phone recognize the saved network but it is disabled!!!! i have to tap it in order to connect. any solution please?
beboo55 said:
beautiful ROM, i like it, i think it will be my DD, a question though, my WiFi is not connecting automatically, it supposed to, when i open the wifi settings, the phone recognize the saved network but it is disabled!!!! i have to tap it in order to connect. any solution please?
Click to expand...
Click to collapse
First, do a factory reset - you shouldn't have any saved networks when you start. The first rule of flashing new roms is clean, clean, clean before you wipe. 80% of all problems I see when flashing are caused by dirty flashes. After you install this ROM, once it's stabilized, then you can think about wiping only dalvik and cache before flashing.
pcarenza said:
Good grief do you guys lurk in the 925 section a lot?
Click to expand...
Click to collapse
More than you know
Sent from my MB886 using xda app-developers app
pcarenza said:
First, do a factory reset - you shouldn't have any saved networks when you start. The first rule of flashing new roms is clean, clean, clean before you wipe. 80% of all problems I see when flashing are caused by dirty flashes. After you install this ROM, once it's stabilized, then you can think about wiping only dalvik and cache before flashing.
Click to expand...
Click to collapse
yeah that is what i did, i wiped everything, after i set it up i added my home network, then when at my office i added office network, i still really like the ROM and the wifi thing is not really an issue to me
I've been running XenonHD for the past five days. Mostly, it's excellent -- stable, smooth and fast as claimed. But I'm having persistent problems with signal strength and with data speeds. It's not that I can't GET data, it's that my signal strength is measurably less now than it was with a stock ROM in places where I know how strong my signal should be, I almost never get an indication that I'm connecting at 4G speeds even in places where I used to maintain 4G and my data reception is spotty to the point that web sites and Play Store come back "no signal" now in places where they never did before. From these comparisons I believe I know that the issue ISN'T that my connection is the same but the indicators are different but rather that my connections (reception, data speed, 3G vs 4G) are worse than they were.
I'm running the latest version of XenonHD on my Verizon XT926 and I wiped everything completely before installation. My installation went very smoothly. I don't have video recorder and I can't tether but both of those shortcomings were known before I flashed the ROM. My data signal strength problems are bad enough that, if I can't improve my situation, I may look for another ROM.
Are there settings in the ROM that could improve my data speed and connectivity? Is there a patch or an app that will at least get me back to the level of connection performance that I had on stock? If so, I'll be happy to use XenonHD as my DD.
lesdense said:
I've been running XenonHD for the past five days. Mostly, it's excellent -- stable, smooth and fast as claimed. But I'm having persistent problems with signal strength and with data speeds. It's not that I can't GET data, it's that my signal strength is measurably less now than it was with a stock ROM in places where I know how strong my signal should be, I almost never get an indication that I'm connecting at 4G speeds even in places where I used to maintain 4G and my data reception is spotty to the point that web sites and Play Store come back "no signal" now in places where they never did before. From these comparisons I believe I know that the issue ISN'T that my connection is the same but the indicators are different but rather that my connections (reception, data speed, 3G vs 4G) are worse than they were.
I'm running the latest version of XenonHD on my Verizon XT926 and I wiped everything completely before installation. My installation went very smoothly. I don't have video recorder and I can't tether but both of those shortcomings were known before I flashed the ROM. My data signal strength problems are bad enough that, if I can't improve my situation, I may look for another ROM.
Are there settings in the ROM that could improve my data speed and connectivity? Is there a patch or an app that will at least get me back to the level of connection performance that I had on stock? If so, I'll be happy to use XenonHD as my DD.
Click to expand...
Click to collapse
The ROM of this thread is for the xt925! There's another thread with the XT926 one
Sent from my XT925
Royalfox said:
The ROM of this thread is for the xt925! There's another thread with the XT926 one
Sent from my XT925
Click to expand...
Click to collapse
Okay, here's a stupid question.
On the download page, what is the code name for the Motorola Razr HD? I know Maguro is for the Nexus...but which one is the proper download for my 925??
---------- Post added at 07:42 PM ---------- Previous post was at 07:39 PM ----------
notyourstar said:
Okay, here's a stupid question.
On the download page, what is the code name for the Motorola Razr HD? I know Maguro is for the Nexus...but which one is the proper download for my 925??
Click to expand...
Click to collapse
Actually...it's called Vanquish, isn't it.
notyourstar said:
Okay, here's a stupid question.
On the download page, what is the code name for the Motorola Razr HD? I know Maguro is for the Nexus...but which one is the proper download for my 925??
---------- Post added at 07:42 PM ---------- Previous post was at 07:39 PM ----------
Actually...it's called Vanquish, isn't it.
Click to expand...
Click to collapse
Yes
Sent from my XT925 using xda premium
When it's working it's a great ROM..but...
After a short while the launcher start crashing to the point that the ROM became unusable..
I am back to stock JB (Rogers).
I followed the instruction of installation to the point.
About Carbon
CarbonRom is an aftermarket firmware based on the Android Open Source Project. We are dedicated to fast, stable, and feature-filled roms, honesty and communication with our users, and openness with our code. We like frequent builds, with the very latest and greatest hardware support and fixes. We strive to not only provide you with the best rom we can build, but also to give back to the Android community and our fellow developers. For us, this is about creating something we can be proud of and hope you will enjoy.
Please feel free to look at, build, and use our code on CarbonDev GitHub.
We would like to thank CyanogenMod for their device trees, framework/settings mods and their code that was incorporated into this project. We also extend our gratitude to the devs whose code that we have incorporated. Proper authorship has been maintained and can be viewed on our repository.
Special thanks also go to Slim Rom for some of their features, PA, AOKP, and anyone else we may have borrowed commits from that hasn't been mentioned here. If you feel you have been unfairly left out, please - let us know.
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device, family, pets, or perception of reality. We ask that you do your part to know your device and know how to recover from problems before you flash! If you have questions, ask your fellow users or ask us in #teamcarbon on freenode IRC.
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Carbon Updates
Join us on these Social Media Channels to keep yourself up-to-date on all the latest Carbon news, updates, contests, and more! Join our completely open Google+ community for insider conversation with devs and other users.
Download Carbon
All Carbon downloads and further information such as features, changelog, and FAQ can be found on our goo.im page.
http://goo.im/devs/carbon
Changelog
For a detailed changelog, check out the changes made each night here:
Change Log
Support
We spend an astonishing amount of time developing this software. We can't spend much time on XDA as a result, so if you need support, please try the following:
1) Search. Search, search, search. Yes, you. I don't care how unique or important your question is, it's very likely someone has adressed it already. Especially if you're even close to new at this.
2) Read our FAQ, which can be found on our goo.im page linked above. It's new, but expanding fast. Just like us!
3) Ask a question in your device forum. Someone will no doubt try to help you. Warning: this help may come in the form of telling you it's a dumb question that has been asked before. See step 1 - such are the perils of asking questions when you haven't done the research yourself. Android is about helping yourself.
4) Ask a question on our IRC channel. Connect to #teamcarbon on irc.freenode.net or click here. You'll find several other Carbon fans and usually one or more devs as well. Please be polite.
Who is Team Carbon?
Andros11
BigShotRob
Bionic Beast
dg4prez
Kejar31
mattmanwrx
morfic
nocoast
pixeldotz
slick_rick
winner00
Remember, every penny you send to us goes right back into the rom. It's used for hardware, server costs, etc - all the things that help us make Carbon better with every release. Your support means the world to us! If you've enjoyed Carbon, please consider a donation toward this goal. Thank you, and we hope you continue to enjoy Carbon!
Buglist
Some (not all) seem to experience issues with GPS. If you have issues with GPS, please flash the official JB from Moto/your provider and then flash Carbon. GPS should work now. (I've also heard you can just flash back to stock, get a lock, then flash Carbon again...)
While capturing a picture to send via MMS, ensure HDR is deselected - Gallery will cause a force close if HDR is enabled!! (Note - HDR works for normal still photos, just not MMS.)
Update Google Search (manual update), or else any voice searches will fail with FC. Update the app, and it is resolved.
Please use the provided gapps below. They are the official Google ones for 4.3.
gapps-jb-20130813-signed.zip Mirror #1 Mirror #2
Alright folks! I have submitted the merge requests, I really hope they make it for tonight's run of nightlies... I can upload the build I rolled as a test if needed, no worries!
What are the chances of gps working? And blue tooth audio lol.
Sent from my PACMAN MATRIX HD MAXX
It's nice to see some official development going on here. I'll download to test tomorrow after school.
Sent from my MB886 using xda app-developers app
deeje00 said:
What are the chances of gps working? And blue tooth audio lol.
Click to expand...
Click to collapse
Seconded on the BT audio. I don't have an aux hooked up in my car, and USB audio isn't a thing with this phone, so BT audio is how I listen to my music. Must have for me!
This ROM looks pretty nice though! Can't wait to give it a try!
deeje00 said:
What are the chances of gps working? And blue tooth audio lol.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
thedeany said:
Seconded on the BT audio. I don't have an aux hooked up in my car, and USB audio isn't a thing with this phone, so BT audio is how I listen to my music. Must have for me!
This ROM looks pretty nice though! Can't wait to give it a try!
Click to expand...
Click to collapse
You guys are going to have to tell me... I don't have the device (see the OP), and thus I cannot test.
What I can tell you is my device (Photon Q) is the same SoC... so in theory it should work the same. BT audio streaming and GPS both work great here.
If you folks have run the CM10.1 build from epinter, the buglist there basically applies here.
arrrghhh said:
You guys are going to have to tell me... I don't have the device (see the OP), and thus I cannot test.
What I can tell you is my device (Photon Q) is the same SoC... so in theory it should work the same. BT audio streaming and GPS both work great here.
If you folks have run the CM10.1 build from epinter, the buglist there basically applies here.
Click to expand...
Click to collapse
Well, from what I've understood from other posts, the BT audio is dependent on the kernel, correct? And since we don't have an official 4.2 release, and thus no kernel, BT audio is dead right now. Would the Photon still be the same kernel?
thedeany said:
Well, from what I've understood from other posts, the BT audio is dependent on the kernel, correct? And since we don't have an official 4.2 release, and thus no kernel, BT audio is dead right now. Would the Photon still be the same kernel?
Click to expand...
Click to collapse
Well a lot is dependent on the kernel. BT audio depends on many things, there are some aspects of the kernel that do depend on BT audio... the kernel is basically the interface between the OS and the hardware, so the kernel definitely touches a lot!
Perhaps I should make this more clear. If you have any issues with this CM10.1 ROM, then you will probably have the same issues with this ROM.
Again, I do not have an Atrix HD, I am only supporting this device because the SoC is identical to a moto device I do own... So help me out, run it, let me know what's wrong with it... and I can certainly try and fix it, but unfortunately without the device it won't be easy. I will do my best!
arrrghhh said:
Well a lot is dependent on the kernel. BT audio depends on many things, there are some aspects of the kernel that do depend on BT audio... the kernel is basically the interface between the OS and the hardware, so the kernel definitely touches a lot!
Perhaps I should make this more clear. If you have any issues with this CM10.1 ROM, then you will probably have the same issues with this ROM.
Again, I do not have an Atrix HD, I am only supporting this device because the SoC is identical to a moto device I do own... So help me out, run it, let me know what's wrong with it... and I can certainly try and fix it, but unfortunately without the device it won't be easy. I will do my best!
Click to expand...
Click to collapse
Thank you for the explanation! It's pretty late tonight, but I'll try to flash this tomorrow and let you know what's working and not working for me!
Thanks for the rom. Funny thing is I almost compiled this Sunday. I've seen that branch in the repos and was curious as to what it was. Gonna try it out later.
Also, thanks for the GPS tip. I was on ICS before I started playing with custom roms so I'll flash stock (ugh) and see if that helps. Probably later tonight, I just got up and need to see what needs to be done today. I don't play with my phones when crap might need to be done.
Same problem as other 4.2.2 roms, bluetooth audio does NOT work
tvd0405 said:
Same problem as other 4.2.2 roms, bluetooth audio does NOT work
Click to expand...
Click to collapse
Any issues in the CM10.1 ROM are likely going to be present here.
Interesting tho that my device, same SoC does not suffer from this bug. Will see what I can unearth.
skeevydude said:
Thanks for the rom. Funny thing is I almost compiled this Sunday. I've seen that branch in the repos and was curious as to what it was. Gonna try it out later.
Also, thanks for the GPS tip. I was on ICS before I started playing with custom roms so I'll flash stock (ugh) and see if that helps. Probably later tonight, I just got up and need to see what needs to be done today. I don't play with my phones when crap might need to be done.
Click to expand...
Click to collapse
Actually I've found going back to stock ICS fixed GPS whereas stock JB did not.
Sent from my Atrix HD using Tapatalk 4 Beta
Youngunn2008 said:
Actually I've found going back to stock ICS fixed GPS whereas stock JB did not.
Sent from my Atrix HD using Tapatalk 4 Beta
Click to expand...
Click to collapse
Its never fixed it for me. Are you doing fast boot flashes? I got laid off and no data cord so i have to wait
Sent from my MB886 using xda app-developers app
TTLayland said:
Its never fixed it for me. Are you doing fast boot flashes? I got laid off and no data cord so i have to wait
Sent from my MB886 using xda app-developers app
Click to expand...
Click to collapse
Yeah you have to fast boot all the ICS files from the sbf except of course the getvar and first line in the XML. That way you get all the proper drivers rolled back. Then flash the cwm recovery IMG in fast boot and boot to recovery and flash a custom ROM, usually after this it'll work at least with the xt925 ROMs.
Sent from my Atrix HD using Tapatalk 4 Beta
arrrghhh said:
Any issues in the CM10.1 ROM are likely going to be present here.
Interesting tho that my device, same SoC does not suffer from this bug. Will see what I can unearth.
Click to expand...
Click to collapse
tvd0405 said:
Same problem as other 4.2.2 roms, bluetooth audio does NOT work
Click to expand...
Click to collapse
So has this been beaten to a dead horse? Logs? Anyone made headway with it?
I've poked around a bit, but haven't put a ton of time into it yet. Any info will help shorten my task, thanks!
Running carbon right now. I lowered the CPU speed. Does the performance setting effectively control both cores? I ask because OCs make my device reboot. I'm in no need for the over clock. I recommend setting the default speed to stock speed for compatibility with options to over clock.
Update still getting the reboots. How can I provide error logs for you? FYI I am currently without any micro USB data cable.
Sent from my MB886 using xda premium
arrrghhh said:
So has this been beaten to a dead horse? Logs? Anyone made headway with it?
I've poked around a bit, but haven't put a ton of time into it yet. Any info will help shorten my task, thanks!
Click to expand...
Click to collapse
There is some info about GPS in slimbean thread...thats more like all we have now, i dont think anyone is working on BT audio...let me know if i can help...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Overview
OmniROM is pretty close to AOSP, as the 4.4.4 era comes to a close I've decided to post it.
This build has nothing to do with Nobe1976.
It is not his build on Droidrzr forums and was built by me, from source. Although it is likely the same (assuming configs for our device haven't changed much the past year)
Download
Feb/27/2015: OmniROM 4.4.4
KKBL only for now folks!!!
Source
Device
https://github.com/CyanogenMod/android_device_motorola_moto_msm8960/tree/cm-11.0
Kernel
https://github.com/CyanogenMod/android_kernel_motorola_msm8960dt-common/tree/cm-11.0
Vendor
https://github.com/TheMuppets/proprietary_vendor_motorola/tree/cm-11.0
Yes JJBL people, I will build for you, but I need someone to test so OmniROM aside; IF JBBL people want these firmware I will need a tester :<
Just flashed this on my XT926 and the only issue ive had is when going into Settings>More>Mobile Networks>Carrier Settings The process com.android.phone force closes.
nice rom, works fairly well on my razr m. feels lighter than cyanogenmod and other 4.4.x roms.
lol
Do you know about Lollipop? lol
Working really great on my XT925.. I love OmniRom.. Thanks @Tqr
The fact that this base appeared here means MIUI v6 comes soon
Edit: I'm NOT heading MIUI v6 I am only working as an assistant this is not my era to shine; with that being said if I can't get a JBBL volunteer It's not likely JBBL people will get MIUI v6
kkruglov said:
nice rom, works fairly well on my razr m. feels lighter than cyanogenmod and other 4.4.x roms.
Click to expand...
Click to collapse
A lot of people use my MIUI or other fork builds but don't really have the chance to use my source-builds which are almost always nearly 'perfect' (I don't usually post them)
Some compatibility takes a huge hit after I start chopping stuff to pieces so I just wanted to throw this up for people who are the opposite of the MIUI/Lewa/Whatever crowd and just want something as close to 'stock' android as possible.
Tqr said:
but don't really have the chance to use my source-builds which are almost always nearly 'perfect' (I don't usually post them)
Click to expand...
Click to collapse
why?
kkruglov said:
why?
Click to expand...
Click to collapse
It would annoy me if someone ported a ROM I had planned to work on using a base I built.
Tqr said:
The fact that this base appeared here means MIUI v6 comes soon
Edit: I'm NOT heading MIUI v6 I am only working as an assistant this is not my era to shine; with that being said if I can't get a JBBL volunteer It's not likely JBBL people will get MIUI v6
Click to expand...
Click to collapse
Looking forward to see MIUI v6! Loved MIUI even since my evo 3d. Hope it comes soon
Sent from my DROID RAZR HD using XDA Free mobile app
dulexetina said:
Looking forward to see MIUI v6! Loved MIUI even since my evo 3d. Hope it comes soon
Sent from my DROID RAZR HD using XDA Free mobile app
Click to expand...
Click to collapse
Me too but my build configs are currently not working correctly for some devices.
It's kind of problematic on my end at this point because the past two builds of (pretty much) AOSP have resulted in failure for some unknown reason; even with supported configs.
At the same time to bring a close-to-AOSP ROM to this firmware I had to make a lot of changes in source; changes which may have caused breakage upon building for some devices so I've had to revert everything for this specific build which will probably set the process back a day or two.
But I don't want to sound over-important; the person heading v6 could have(and has) done this fully on their own power without issue and I am really contributing nothing except for build related stuff which isn't even essential It's just to save them time because a lot of time was saved in my life during v5.
It's like they say, someone does something for you and you do something for them if you can; a capacity I'm kind of failing in right now because a lot of the devices I'd like to see get hit with v6 do not have proper source bases
Thanks, very smooth... can you add HDR feature?
ikromy said:
Thanks, very smooth... can you add HDR feature?
Click to expand...
Click to collapse
Maybe, I have to address JBBL right after I finished with the device I'm building for right now.
Like a true piece of scum I neglected the JBBL folks during v5 because I wasn't aware of the exacts surrounding it and frankly was too lazy/busy to produce it.
But from here out all of my builds will also accomodate JBBL now that I know how to deal with it.
I mean it's really like a friend of mine said; that it's better to release broken things at first because If you release something right the first time your topic won't have as many views and as much attention but I've always kind of been a black sheep with my preference for (nearly fully) functional first releases
Edit: I can do MIUIv5 for JBBL if people really still care about it but I'd rather focus on getting things ready for V6, and other projects I'm working on
It's really important that ANY errors with this code-base are brought to my attention , I really do not want to find out there is some inherent error in this when V6 is released It's really important that I do this right so I don't have to bother the developer of it to do yet another build on a rebase.
I feel like I've really annoyed people because I've had multiple peers/friends/co-workers/whatever download firmware that somehow 'wasn't right' this week
Do it. It's been awhile. And that miui phone overseas is killing em softly. I'm on jbbl now to start fresh but if you decide to put out v5 I'll try it. I am ecstatic about v6 to try out.. I will be trying the omni for now. I need a real stable ROM at the moment.
Get lolly miui for mb886.
manuski said:
Do it. It's been awhile. And that miui phone overseas is killing em softly. I'm on jbbl now to start fresh but if you decide to put out v5 I'll try it. I am ecstatic about v6 to try out.. I will be trying the omni for now. I need a real stable ROM at the moment.
Click to expand...
Click to collapse
MIUI v6 is now nearly fully functioning on moto_msm8960 JBBL & KKBL, including V6 camera, scanner and all the other stuff you'd expect.
Unlike being a PatchROM build this is a direct adaptation from a Xiaomi device so there is a level of exclusivity here.
I really don't have the right to release this, It will be part of a friends multi-base thread; It'll show up at some point next month, hopefully.
I wanted to let people who are really anticipating being able to use V6 know that the codebase is finished; it does have all the features you'd expect on true stock MIUI that have never been ported (In this era):
- MIUI camera (Everything, including filters, panorama, fast&slow-motion recording mode...)
- MIUI Scanner (Everything)
- Nearly full native Xiaomi drivers (!)
- Everything, all features
TecknoFreak said:
Get lolly miui for mb886.
Click to expand...
Click to collapse
It's being worked on as well, but 4.4 takes priority because it is literally almost finished.
Tqr said:
MIUI v6 is now nearly fully functioning on moto_msm8960 JBBL & KKBL, including V6 camera, scanner and all the other stuff you'd expect.
Unlike being a PatchROM build this is a direct adaptation from a Xiaomi device so there is a level of exclusivity here.
I really don't have the right to release this, It will be part of a friends multi-base thread; It'll show up at some point next month, hopefully.
I wanted to let people who are really anticipating being able to use V6 know that the codebase is finished; it does have all the features you'd expect on true stock MIUI that have never been ported (In this era):
- MIUI camera (Everything, including filters, panorama, fast&slow-motion recording mode...)
- MIUI Scanner (Everything)
- Nearly full native Xiaomi drivers (!)
- Everything, all features
Click to expand...
Click to collapse
This is great to hear man! Now I want to try it even more.Can't wait till next month...release it tomorrow MIUI 5 was great,simple and smart,just hope that v6 is gonna be same or even better.
Sent from my DROID RAZR HD using XDA Free mobile app
Honestly I straight up lied.
MIUI v6 boots with full function except RIL- Because of the nature of this work all builds have been kept closed. I will check with the head of development and ask if beta may begin.
If anyone here feels strong in development and can address RIL both the KKBL and JBBL can have this firmware in the very forseeable future. It's because we use some kind of fked up Generic RIL and I'm not sure where to play Xiaomis invasive code because It's so different.
I do not even know how this device handles RIL in the 4.4 era, if anyone has an understanding of this please be in touch.
They will both be built from the same exact configs, just set up per model these are built off T-Mobile EPH2 sources until future updates and I do not plan on doing it any other way as I only have the T-Mobile device.
These are built off SaberMod 7.0 Toolchain
Features
Newest EPH2 Sources 8/24/16
Highly customizeable with 3C Toolbox, Kernel Toolkit, Kernel Auditor.. Synapse support SOON
Linux 3.10.104
Kernel built in Root With SuperSU Systemless 2.77
Atlas A57 Big Core Clockable to 400Mhz and 2300
Apollo A53 Little Core Clockable to 400Mhz And 1600
21 Different Cpu Governors
11 I/o Schedulers
TCP Additions
VMA Caching
Graphite
Ccache
Permissive Enabled
Google Services Battery Drain Fix
I am still new to all of this and learning slowly by day, I promise to try my best and give back as much as I can for everyone still around until I get a new device.
I ended up cracking my LCD and Touchscreen and I want to thank these generous enough users that donated to pay for my new part to keep developing for the S6.. You guys are prime examples of how XDA keeps giving back no matter what, Thank you guys for helping getting a new replacement screen.
Link for others who would like to donate here is the link: Paypal Donation We are currently a bit more than half to the price of the LCD&Digitizer Replacement
if you donate please send me a pm to let me know as it's a business paypal and do not have emails notifications 24/7 so I can personally thank you!
1. @bigtom624
2. @slickrick54
3. @Thomas1109
4. @Frasertbf
5. @bx10r
6. @JJalowiec
7. @D<3'SJ2427
Once again, thank you everyone for pitching in and helping me during this tragic event, wouldn't be able to keep going without you guys
Downloads!
Firestorm V4 Beta Flat ---> https://s.put.re/G6gGhKg.zip
Firestorm V4 Beta Edge ---> https://s.put.re/takmvWy.zip
Hurricane VOLTE Icon Fix for Edge users only: https://www.androidfilehost.com/?fid=24713784966775019[/CENTER]
Please, have your modem/bootloader updated to ensure maximum efficiency.
But, if you are NOT on EPH2 Modem/Bootloader, I can NOT offer you support. (This has fixed so many problems for my testers)
I uploaded the bootloader and modem to Stangs AFH here.
G920T EPH2
G925T EPH2
My AFH Folder with all releases except some betas'
Flashing steps is downloading the CORRECT zip from my AFH > going into recovery > install > select zip > swipe to flash > reboot
I want to thank @The Sickness for helping me with every dumb question, fixing boot errors with me, for his HUGE HELPFUL guide, patience in teaching me some of the basics, supplying with files and scripts to make life easy and for Twisted V8 itself and everything else he has done for us when no one else did for us.
XDA:DevDB Information
Project Firestorm, Kernel for the T-Mobile Samsung Galaxy S6
Contributors
Maqical, Maqical
Source Code: https://github.com/Maqical/Firestorm
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: v3
Stable Release Date: 2016-09-03
Current Beta Version: v3.5
Beta Release Date: 2016-09-05
Created 2016-08-02
Last Updated 2016-09-03
Changelogs:
9/3/16
Built off Newest EPH2 Sources
Ramdisk updated
Overclocking and underclocking readded
SuperSU Updated to 2.77
Toolchain switched back to Sabermod
Toolchain updated from 5.3 to 6.0
More stuff I'm forgetting for now..
9/7/16
Ramdisk .sh files
Voltage upped
Reboots fixed
Toolchain switched to Sabermod 7.0
LZ4 Enabled
Graphite Enabled
ROW enabled
9/8/16
Rebuilt entirely
Linux Kernel update to .103
LZ4 Removed
Graphite/CCache Enabled
Row Enabled
Ktoon enabled
Sabermod GCC7.0
Ramdisk updated
Voltage updated to help my edge users
Upcoming features:
Global voltage
Possibly synapse
Mine
Let me be 1st....
It's great to see someone taking the initiative to learn and develop kernels for both variants.
I had no doubt that it would be you to take over the kernel development here. I'm pleased that my kernel guide helped you in achieving success.
This is just the beginning......
Welcome
Absolutely agree with The Sickness!
It is so great to see people who actually want to learn, learn!
This is NEVER an easy task, especially with our day to day lives and real world duties always getting in the way, but for a few truly dedicated that do this for their own knowledge and power so that can DO things and not be told what they can do or have their phones do, they take the many, many, many ok one more, many hours of reading to finally get a chance to try something on their own and to hopefully with great success!
Then to bring that new found knowledge from the countless hours and share with the rest of us here!
That is why just a little appreciation goes a long way.
For even a simple rom mod, by which a Kernel build is not even in the same category, but a simple mod which for myself or the sickness may now only take me a few minutes to complete, doesn't take in to account the knowledge we gained from the days, months and even years to gain.
So let's welcome our newest Android Developer @Maqical with the help of the recently retired (we'll see lol, but best of luck with your future endeavors!) and mentor @The Sickness who has brought to us all countless roms, mods, guides, support and now kernels!
So for anyone wondering what's the point of hitting the thanks button or simply giving a little feedback when we ask, this is what keeps us going because we don't have to share, we d9nt have to add the mod or update that project or make it compatible for your device, it already works fine in our phones and I don't use that mod or why that what?
We do it because we are simply giving back to the community that gave us so much!
So hit the thanks, mention our projects and share with others what we have shared to you for free!
Thanks.
I will probably be editing this 9nce I read it later when I'm not sleep posting. Lol
Congrats and good luck fill8ng those boots! You know I love ya Chris and miss your presence here! What's this about N7?...
stangdriver44 said:
Absolutely agree with The Sickness!
It is so great to see people who actually want to learn, learn!
This is NEVER an easy task, especially with our day to day lives and real world duties always getting in the way, but for a few truly dedicated that do this for their own knowledge and power so that can DO things and not be told what they can do or have their phones do, they take the many, many, many ok one more, many hours of reading to finally get a chance to try something on their own and to hopefully with great success!
Then to bring that new found knowledge from the countless hours and share with the rest of us here!
That is why just a little appreciation goes a long way.
For even a simple rom mod, by which a Kernel build is not even in the same category, but a simple mod which for myself or the sickness may now only take me a few minutes to complete, doesn't take in to account the knowledge we gained from the days, months and even years to gain.
So let's welcome our newest Android Developer @Maqical with the help of the recently retired (we'll see lol, but best of luck with your future endeavors!) and mentor @The Sickness who has brought to us all countless roms, mods, guides, support and now kernels!
So for anyone wondering what's the point of hitting the thanks button or simply giving a little feedback when we ask, this is what keeps us going because we don't have to share, we d9nt have to add the mod or update that project or make it compatible for your device, it already works fine in our phones and I don't use that mod or why that what?
We do it because we are simply giving back to the community that gave us so much!
So hit the thanks, mention our projects and share with others what we have shared to you for free!
Thanks.
I will probably be editing this 9nce I read it later when I'm not sleep posting. Lol
Congrats and good luck fill8ng those boots! You know I love ya Chris and miss your presence here! What's this about N7?...
Click to expand...
Click to collapse
Lets just say that I'm proud......Kernel building isnt for everyone. If it was we would have as many kernels as we do roms.
Note 7........I'll leave a no comment on that lol.
Just wanna drop in to wish you luck and say Congrats. As i said before...it would be you to fill them shoes. Always around if you need help, you know where i be.
Sent from my SiC 6
Heres what Im going to do.. tomorrow ill rewrite my op.. make it neater, maybe try and find a nice graphic design (feel free to make me one)
I'm going to split these up into two, yes two
FrostFang Series will be barebone stock kernel with min but necessary features added
Firestorm Series will be full out highly custom kernel with everything you could ask for.. literally ask for more I'll add it
I'll leave the links up for now, but it's 4:45am.. going to get some rest
Tomorrow ill rebuild the stock series and rename it Frostfang and get it all posted together, if anyone wants anything added or would like to see anything this is the time before I get back to work in a few hours
Hope everyone enjoys and thanks for the kind words everyone so far
Well Damn congrats I know you going to make some Magic on this kernel!
Sent from my SM-G920T using Tapatalk
,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Bored at work
Sent from my SiC 6
V1 custom for edge is only 6mb and all others are 18mb
Sent from my SM-G920T using Tapatalk
Thanks for your help in keeping our phones going @magical. I can't wait to try your Kernel out. I will report back. Thanks again
@Maqical I see you finally did it good job and good luck keep up the good work :good: glad to see everything is going well so far
@Maqical thanks for keeping on the development of the custom kernels for both variants.
@magical thanks for this kernel. I flashed the CustomV1 flat first issue I had was deep sleep. I just used the deep sleep flashable zip and and cleared Google service framework data cache it took care of the issue. 2nd and last issue was very odd after flashing the kernel it wouldnt auto connect me back to my wifi network after checking the wifi setting showed an authentication error after i re updated the password has worked fine ever since and it's Very very stable. thank you for the additional support unfortunately I don't have computer or laptop to do developemnt. Otherwise this s6 would have more a few more ports and kernels
Sent from my SM-G920T using Tapatalk
slickrick54 said:
V1 custom for edge is only 6mb and all others are 18mb
Sent from my SM-G920T using Tapatalk
Click to expand...
Click to collapse
crashpsycho said:
@magical thanks for this kernel. I flashed the CustomV1 flat first issue I had was deep sleep. I just used the deep sleep flashable zip and and cleared Google service framework data cache it took care of the issue. 2nd and last issue was very odd after flashing the kernel it wouldnt auto connect me back to my wifi network after checking the wifi setting showed an authentication error after i re updated the password has worked fine ever since and it's Very very stable. thank you for the additional support unfortunately I don't have computer or laptop to do developemnt. Otherwise this s6 would have more a few more ports and kernels
Sent from my SM-G920T using Tapatalk
Click to expand...
Click to collapse
Yeah sorry about that guys, I was literally up for like 24 hours no sleep I messed up the zips, I'll get new ones posted within 2 hours.
Sorry about that
Maqical said:
Yeah sorry about that guys, I was literally up for like 24 hours no sleep I messed up the zips, I'll get new ones posted within 2 hours.
Sorry about that
Click to expand...
Click to collapse
It's all good and quick question is synapse going to be included with your kernel?
Sent from my SM-G920T using Tapatalk
slickrick54 said:
It's all good and quick question is synapse going to be included with your kernel?
Sent from my SM-G920T using Tapatalk
Click to expand...
Click to collapse
Probably around v4-v5 which will be faster than it sounds, I got alot of other stuff I gotta add and tweak a bit before I get it added, I'm rebuilding v1 custom for edge right now
Maqical said:
Probably around v4-v5 which will be faster than it sounds, I got alot of other stuff I gotta add and tweak a bit before I get it added, I'm rebuilding v1 custom for edge right now
Click to expand...
Click to collapse
Nice thanks....
Sent from my SM-G920T using Tapatalk