Related
I recently upgraded to an HTC One, on Verizon in the US. I promptly used rumrunner s-off to get S-OFF, unlock the bootloader, and obtain root. I also flashed the latest ClockworkMod recovery, with the intent of installing CyanogenMod, but decided I'd try out the stock ROM for a few days first, since my old phone was still on Gingerbread.
Everything was working fine until I decided to remove some Verizon bloatware. While I did back up each app before removing it, I forgot to make a nandroid backup. I only removed things that seemed nonessential -- such as the NFL Mobile app, Slacker radio, and My Verizon, which I'd also removed without issue on my old phone -- but apparently that was not the case, as after rebooting, I got stuck on the Verizon logo during the boot sequence.
I then attempted to perform a factory reset in CWMR, and it appeared to be stuck on "wiping cache", so -- like the impatient idiot I clearly am, as I later found a few threads explaining that this part of the reset process can just take a very long time -- I rebooted the phone to try again. This resulted in CWMR throwing errors about failing to mount several partitions, but it finally seemed to finish the reset on the second try. However, upon reboot, it just sat at the HTC logo forever.
After about an hour, and no success in finding anything on the internet indicating that it should take this long to boot up after a reset, I powered the phone off and back on again. After rebooting, the bootloader screen displayed "OS" in red followed by some random symbols. I could still get into recovery, and could still access the device with fastboot, so I decided to try to reflash the stock ROM, using the RUU zip found here.
Due to some problem (this was all about 6 hours ago while I was at work, and I was quite frustrated at this point, so I don't remember what exactly was the problem here) and based on the advice of another forum thread, I decided to try TWRP instead of CWM. But, TWRP wouldn't go any further than its logo splash screen, so I re-flashed CWM. Afterwards, my phone went into a reboot loop -- the HTC logo comes up, the phone vibrates shortly, and then after a few seconds the screen turns off and it does the same thing over again. If I hold the power button down for long enough, it will power down, but if I try to turn it back on, it will either go into the loop again, or just sit at the HTC logo (left it there for upwards of an hour at one point).
I have found several threads about similar boot loop issues, but as I can't get into hboot/fastboot or recovery, I can't try to apply any of the solutions. I cannot connect from my computer with fastboot or adb -- "devices" lists nothing, and all other commands return either "error: no device found" or "waiting for device". No amount of power+volume down makes any difference, nor does holding the phone under a bright light as several threads suggested. Occasionally it will go to a black screen (not off, just black) that maybe it thinks is the bootloader menu, but it doesn't display anything, and after about 30 seconds it will reboot itself.
Does anyone have any suggestions for getting into recovery and trying to reflash.... something?
Alternatively, if I return it to Verizon at this point, will they be able to tell that it's rooted/unlocked/S-OFF?
Any ideas would be much appreciated!
brasstongue said:
I recently upgraded to an HTC One, on Verizon in the US. I promptly used rumrunner s-off to get S-OFF, unlock the bootloader, and obtain root. I also flashed the latest ClockworkMod recovery, with the intent of installing CyanogenMod, but decided I'd try out the stock ROM for a few days first, since my old phone was still on Gingerbread.
Everything was working fine until I decided to remove some Verizon bloatware. While I did back up each app before removing it, I forgot to make a nandroid backup. I only removed things that seemed nonessential -- such as the NFL Mobile app, Slacker radio, and My Verizon, which I'd also removed without issue on my old phone -- but apparently that was not the case, as after rebooting, I got stuck on the Verizon logo during the boot sequence.
I then attempted to perform a factory reset in CWMR, and it appeared to be stuck on "wiping cache", so -- like the impatient idiot I clearly am, as I later found a few threads explaining that this part of the reset process can just take a very long time -- I rebooted the phone to try again. This resulted in CWMR throwing errors about failing to mount several partitions, but it finally seemed to finish the reset on the second try. However, upon reboot, it just sat at the HTC logo forever.
After about an hour, and no success in finding anything on the internet indicating that it should take this long to boot up after a reset, I powered the phone off and back on again. After rebooting, the bootloader screen displayed "OS" in red followed by some random symbols. I could still get into recovery, and could still access the device with fastboot, so I decided to try to reflash the stock ROM, using the RUU zip found here.
Due to some problem (this was all about 6 hours ago while I was at work, and I was quite frustrated at this point, so I don't remember what exactly was the problem here) and based on the advice of another forum thread, I decided to try TWRP instead of CWM. But, TWRP wouldn't go any further than its logo splash screen, so I re-flashed CWM. Afterwards, my phone went into a reboot loop -- the HTC logo comes up, the phone vibrates shortly, and then after a few seconds the screen turns off and it does the same thing over again. If I hold the power button down for long enough, it will power down, but if I try to turn it back on, it will either go into the loop again, or just sit at the HTC logo (left it there for upwards of an hour at one point).
I have found several threads about similar boot loop issues, but as I can't get into hboot/fastboot or recovery, I can't try to apply any of the solutions. I cannot connect from my computer with fastboot or adb -- "devices" lists nothing, and all other commands return either "error: no device found" or "waiting for device". No amount of power+volume down makes any difference, nor does holding the phone under a bright light as several threads suggested. Occasionally it will go to a black screen (not off, just black) that maybe it thinks is the bootloader menu, but it doesn't display anything, and after about 30 seconds it will reboot itself.
Does anyone have any suggestions for getting into recovery and trying to reflash.... something?
Alternatively, if I return it to Verizon at this point, will they be able to tell that it's rooted/unlocked/S-OFF?
Any ideas would be much appreciated!
Click to expand...
Click to collapse
Can u get into bootloader?? Press power + vol down??
brasstongue said:
After rebooting, the bootloader screen displayed "OS" in red followed by some random symbols.
Click to expand...
Click to collapse
that means your firmware is either in a state of limbo, or you corrupted one of your partitions.
so I decided to try to reflash the stock ROM, using the RUU zip found here. Due to some problem
Click to expand...
Click to collapse
which ruu, and what was the problem
But, TWRP wouldn't go any further than its logo splash screen, so I re-flashed CWM.
Click to expand...
Click to collapse
Did you flash the correct recovery for Verizon (M7_WLS), it's different than international (M7_U/UL)
as @khandelwalsiddharth mentioned you need to get to bootloader if a fix is even possible, so POWER OFF your phone completely, then HOLD VOLDOWN and POWER, when it boots up let go of POWER but keep holding VOLDOWN until you get to bootloader
then you need to have working "fastboot devices" (if you're on Win8.1, you probably need to use another computer with Win7 or use a Linux Live USB)
if you can't get to bootloader, then I don't think this is fixable, cause hboot is corrupt
Thanks for the reply.
nkk71 said:
which ruu, and what was the problem
Click to expand...
Click to collapse
Oh, I guess I forgot to make that a link... I had downloaded the only VZW one on this page but I'm not even sure why I bothered to mention it, as downloading it to my computer was the only thing I ever did with it; I was never able to get as far as flashing it to the phone, so it actually had nothing to do with the problem...
nkk71 said:
Did you flash the correct recovery for Verizon (M7_WLS), it's different than international (M7_U/UL)
Click to expand...
Click to collapse
I was under the impression that Verizon was m7vzw, in which case yes, I was using the correct recovery (6.0.4.7 version listed next to "HTC One (Verizon)" on this page) and it was working just fine the first time I flashed it.
nkk71 said:
as @khandelwalsiddharth mentioned you need to get to bootloader if a fix is even possible, so POWER OFF your phone completely, then HOLD VOLDOWN and POWER, when it boots up let go of POWER but keep holding VOLDOWN until you get to bootloader
Click to expand...
Click to collapse
Yeah, I've tried this about 100 times, and the only thing holding VOLDOWN does is occasionally interrupt the boot loop to send me to the black screen for 30 seconds before going back into the boot loop. I did find one thread where the poster was able to get into the bootloader after letting the phone sit overnight, so I'll try again tomorrow, but I'm not very hopeful.
nkk71 said:
then you need to have working "fastboot devices" (if you're on Win8.1, you probably need to use another computer with Win7 or use a Linux Live USB)
Click to expand...
Click to collapse
I'm on Win7, and "fastboot devices" was working the other day, so I know my drivers are all set up properly and functioning. The phone just isn't booting far enough to connect to the computer.
nkk71 said:
if you can't get to bootloader, then I don't think this is fixable, cause hboot is corrupt
Click to expand...
Click to collapse
So... should be safe to take it back to Verizon and ask for a replacement, since they won't be able to tell it's unlocked? >_>
brasstongue said:
Thanks for the reply.
Oh, I guess I forgot to make that a link... I had downloaded the only VZW one on this page but I'm not even sure why I bothered to mention it, as downloading it to my computer was the only thing I ever did with it; I was never able to get as far as flashing it to the phone, so it actually had nothing to do with the problem...
I was under the impression that Verizon was m7vzw, in which case yes, I was using the correct recovery (6.0.4.7 version listed next to "HTC One (Verizon)" on this page) and it was working just fine the first time I flashed it.
Yeah, I've tried this about 100 times, and the only thing holding VOLDOWN does is occasionally interrupt the boot loop to send me to the black screen for 30 seconds before going back into the boot loop. I did find one thread where the poster was able to get into the bootloader after letting the phone sit overnight, so I'll try again tomorrow, but I'm not very hopeful.
I'm on Win7, and "fastboot devices" was working the other day, so I know my drivers are all set up properly and functioning. The phone just isn't booting far enough to connect to the computer.
So... should be safe to take it back to Verizon and ask for a replacement, since they won't be able to tell it's unlocked? >_>
Click to expand...
Click to collapse
my bad, thought I read Sprint, not sure if Sprint and Verizon use same recovery, but that doesn't really matter now
unless you can get to bootloader, you're stuck, sorry.
If your pc does see "fastboot devices" then it must be in bootloader and flashing a ruu.zip (if available) could (that's a very big could) get the device working again.
Hi, well it looks like i have probably hard bricked my phone. After updating to nougat i decided to do afresh clean install. I wanted my phone to as if i had just bought it and came with nougat/emui 5 installed. So i did a factory reset from within the settings menu. But then i thought i would completely erase everything and start from the latest build before nougat, so emui 4.1.2/ marshmallow. So after wiping all the partitions in twrp and then doing a volume up + power to do complete factory wipe followed by using the three button method to install the B130 UPDATE.APP in dload folder on my sdcard, all worked as expected. The update completed at 100% and then rebooted. So there i am waiting for my phone to boot to start the setup process as i have done dozens of times before...BUT...my phone will not boot to the initial setup wizard. It just stays stuck on the Honor logo pulsing animation for ever and ever and ever!!!!!!
So i do the volume up + power button to get to stock recovery and do factory wipe and cache wipe as well. It works as expected so i reboot and once again use the 3 button method to install the update.app on my sdcard. That works as expected and at 100% says its succeeded and reboots. Once again i wait for it to boot to the initial setup wizard but....ALAS...it stays on that DAMN pulsing Honor logo. Ive tried rebooting it several times, redoing the factory wipe and install several times, but nothing. Ive gone into fastboot mode (volume down + power) to try and flash the boot.img and system.img ive extracted from update.app but get the error message -- remote: command failed -- and the same if i try to unlock bootloader. Obviously its not going to work because my bootloader isnt unlocked and nor can i got in to developer settings to enable oem unlock and turn USB debugging on because my phone wont boot past that bloody honor logo.
The only thing i havent done yet is to use eRecovery but i dont have broadband and i doesnt seem to work over public wifi! So i will go to my friends tomorrow and use their broadband and hopefullly eRecovery will download/restore the latest firmware. The only other thing i can think of is to download the original nem-l51c432B102 that came with my phone when bought, extract the update.app file and replace the B130 i have on my sdcard dload folder at present.
Sorry for such a long post but i wanted to expalin evrything in detail to hopefully resolve my problem without going backwards and forwards with questions and answers and taking for ever.
So ANYONE and EVERYONE who managed to read the whole post, if you have even the slightest idea of how to get my phone working, please oh please share it with me. Also my phone is still under warranty so if i needed to send it to a huawei centre to get it fixed would they do it and do it for free??? because eseentialy all i did was a factory wipe/reset and install a frmware and it goes KAPUT!! thats not my fault right????!!???
Thank you to one and all for any wisdom you can share. :crying::crying:
iantechie1979 said:
Hi, well it looks like i have probably hard bricked my phone. After updating to nougat i decided to do afresh clean install. I wanted my phone to as if i had just bought it and came with nougat/emui 5 installed. So i did a factory reset from within the settings menu. But then i thought i would completely erase everything and start from the latest build before nougat, so emui 4.1.2/ marshmallow. So after wiping all the partitions in twrp and then doing a volume up + power to do complete factory wipe followed by using the three button method to install the B130 UPDATE.APP in dload folder on my sdcard, all worked as expected. The update completed at 100% and then rebooted. So there i am waiting for my phone to boot to start the setup process as i have done dozens of times before...BUT...my phone will not boot to the initial setup wizard. It just stays stuck on the Honor logo pulsing animation for ever and ever and ever!!!!!! So i do the volume up + power button to get to stock recovery and do factory wipe and cache wipe as well. It works as expected so i reboot and once again use the 3 button method to install the update.app on my sdcard. That works as expected and at 100% says its succeeded and reboots. Once again i wait for it to boot to the initial setup wizard but....ALAS...it stays on that DAMN pulsing Honor logo. Ive tried rebooting it several times, redoing the factory wipe and install several times, but nothing. Ive gone into fastboot mode (volume down + power) to try and flash the boot.img and system.img ive extracted from update.app but get the error message -- remote: command failed -- and the same if i try to unlock bootloader. Obviously its not going to work because my bootloader isnt unlocked and nor can i got in to developer settings to enable oem unlock and turn USB debugging on because my phone wont boot past that bloody honor logo. The only thing i havent done yet is to use eRecovery but i dont have broadband and i doesnt seem to work over public wifi! So i will go to my friends tomorrow and use their broadband and hopefullly eRecovery will download/restore the latest firmware. The only other thing i can think of is to download the original nem-l51c432B102 that came with my phone when bought, extract the update.app file and replace the B130 i have on my sdcard dload folder at present.
Sorry for such a long post but i wanted to expalin evrything in detail to hopefully resolve my problem without going backwards and forwards with questions and answers and taking for ever.
So ANYONE and EVERYONE who managed to read the whole post, if you have even the slightest idea of how to get my phone working, please oh please share it with me. Also my phone is still under warranty so if i needed to send it to a huawei centre to get it fixed would they do it and do it for free??? because eseentialy all i did was a factory wipe/reset and install a frmware and it goes KAPUT!! thats not my fault right????!!???
Thank you to one and all for any wisdom you can share. :crying::crying:
Click to expand...
Click to collapse
Can you please edit your post ? Add some space, here and there if you want some help... It is nothing but pain for both eyes and mind to read you.
Onto related topic, did you manage to get your phone back to a functionnal state ? Note that the boot sequence can take time after a wipe so maybe it's not broken at all.
As for eRecovery, it never helped me to restore my device, tried on two different Wi-Fi networks after two completely unrelated issues.
Concerning warranty, I guess it depends on your country and where you bought your phone. I went to the carrier which provided me mine this morning since I ended up with a strong brick last night and I'll get a new phone in a couple of weeks.
Zarou said:
Can you please edit your post ? Add some space, here and there if you want some help... It is nothing but pain for both eyes and mind to read you.
Onto related topic, did you manage to get your phone back to a functionnal state ? Note that the boot sequence can take time after a wipe so maybe it's not broken at all.
As for eRecovery, it never helped me to restore my device, tried on two different Wi-Fi networks after two completely unrelated issues.
Concerning warranty, I guess it depends on your country and where you bought your phone. I went to the carrier which provided me mine this morning since I ended up with a strong brick last night and I'll get a new phone in a couple of weeks.
Click to expand...
Click to collapse
finally a reply! okay so ill edit my post once ive finished replying to you. First off thanks for taking your time to read my post, i am most greatfull. In response to your questions,suggestions i can tell you:
i went to my friends, connected to their broadband and attempted to use eRecovey to update/restore my device. ALAS it did not work! I tried several times and it gets to downloading package from server only to end in a FAIL.. I got home tried connecting to public wifi and doing eRecovery but it just fails. So like you I have never managed to get eRecovery to work.
As for the booting sequence, as i explained before, whether i access stock recovery and wipe cache and wipe phone it does this no problem, reboots, only to get stuck on the honor logo boot animation. The same goes for installing updatte.app with three button method. it says its installed succesfully but does not get past the honor logo boot animation. Unfortunately your suggestion that it might just take a long time to boot is not the case I have left it for hours you see and it never gets to the setup wizard :crying:
As for warranty, i am in uk, bought the phone via amazon, and it was unlocked, so not from a carrier like you. So i guess ill just have to find my nearest huawei service centre and have them look at it.
Does anyone know the procedure as far as doing this. Do i phone them or email my problem and then send my phone to them or what?? Any help is very welcome.
Thanks for your time and patience.
Please, please help...i'm desperate
So sorry for my original long post people, i simply wanted to give as much detail and info as possible because being vague doesnt help anyone. It seems that might have worked against me.
Please,please any suggestions would be appreciated to the N'th degree! I have tried everything i can think of and i am truly desperate now. I dont understand why i cant get it to work...
I can go into stock recovery and wipe the cach and do factory reset and that works fine, no errors.
I can hold the 3 buttons down to install the firmware package(ive got update.app from B130 build) and that works fine, gets to 100% and says 'success' and then reboots, with no errors.
But either way the phone refuses to boot past the honor logo boot animation and ive left it for hours hoping,praying, it will work after the 32nd time...
I can access fastboot but that is useless because my bootloader is not unlocked and i cant get to developer options to enable 'usb debugging' and 'oem unlock'. So i just get error message 'remote: Command Failed' with any command i type.
But thats madness, i cant comprehend why it wont boot because everything seems to work!?!
There has to be a way to get my device functioning again.
I am pulling my hair out, i am at a complete loss, it doesn't make sense. PLEASE ANYONE ..... please help....
Thanks HONOR-able enthusiasts for any help, no matter how small! :good: :fingers-crossed: :angel:
iantechie1979 said:
So sorry for my original long post people, i simply wanted to give as much detail and info as possible because being vague doesnt help anyone. It seems that might have worked against me.
Please,please any suggestions would be appreciated to the N'th degree! I have tried everything i can think of and i am truly desperate now. I dont understand why i cant get it to work...
I can go into stock recovery and wipe the cach and do factory reset and that works fine, no errors.
I can hold the 3 buttons down to install the firmware package(ive got update.app from B130 build) and that works fine, gets to 100% and says 'success' and then reboots, with no errors.
But either way the phone refuses to boot past the honor logo boot animation and ive left it for hours hoping,praying, it will work after the 32nd time...
I can access fastboot but that is useless because my bootloader is not unlocked and i cant get to developer options to enable 'usb debugging' and 'oem unlock'. So i just get error message 'remote: Command Failed' with any command i type.
But thats madness, i cant comprehend why it wont boot because everything seems to work!?!
There has to be a way to get my device functioning again.
I am pulling my hair out, i am at a complete loss, it doesn't make sense. PLEASE ANYONE ..... please help....
Thanks HONOR-able enthusiasts for any help, no matter how small! :good: :fingers-crossed: :angel:
Click to expand...
Click to collapse
How comes you have TWRP with a locked bootloader ?
Zarou said:
How comes you have TWRP with a locked bootloader ?
Click to expand...
Click to collapse
??? hi, I.m sorry, i think you must of misread some of my post. I dont blame you, it was bloody long and confusing!
I only mentioned twrp in the very beggining to run you through the steps to my never ending being stuck on honor logo boot animation. I used TWRP to wipe all partitions and format. From there i used 3 button method to install the update.app(B130) on my sd-card. this was succesfull, no errors and rebooted. I didn't expect any problems. But as i explained it never gets past boot logo.
Obviously now, twrp has gone, i am back to stock recovery and my bootloader is locked.
*I can access stock recovery to wipe cache and wipe the phone no problem and all works with no error messages.
*I can access fastboot(bootloader) but the fastboot commands are useless because my bootloader is locked once again and i cant turn on usb debugging or oem unlock in developper options....because my phone wont boot past honor logo...
*Three button method works everytime, 100% success, no errors, reboots but guess what?? IT WONT GET PAST THAT DAMN HONOR BOOT LOGO!!!!!!!!!
Ive tried everything, but NO LUCK. I came up with this idea today though--- download theB130 rollback from nougat to MarshMallow update.zip. Extract the update.app and put that in my sd-card/dload folder and do 3 button install method.
I might even do the same with the nougat B350 just to cover all bases. So i am downloading now, gonna cross my fingers and any other body parts, pray to all the gods...and hopefully i wont be a crying,sniveling,howling piece of mess by tomorrow.
UNLESS OF COURSE SOMEONE HAS THE KNOWLEDGE I SEEK AND IS WILLING TO SHARE IT :fingers-crossed:
thanks Honor-able friends....
iantechie1979 said:
??? hi, I.m sorry, i think you must of misread some of my post. I dont blame you, it was bloody long and confusing!
I only mentioned twrp in the very beggining to run you through the steps to my never ending being stuck on honor logo boot animation. I used TWRP to wipe all partitions and format. From there i used 3 button method to install the update.app(B130) on my sd-card. this was succesfull, no errors and rebooted. I didn't expect any problems. But as i explained it never gets past boot logo.
Obviously now, twrp has gone, i am back to stock recovery and my bootloader is locked.
*I can access stock recovery to wipe cache and wipe the phone no problem and all works with no error messages.
*I can access fastboot(bootloader) but the fastboot commands are useless because my bootloader is locked once again and i cant turn on usb debugging or oem unlock in developper options....because my phone wont boot past honor logo...
*Three button method works everytime, 100% success, no errors, reboots but guess what?? IT WONT GET PAST THAT DAMN HONOR BOOT LOGO!!!!!!!!!
Ive tried everything, but NO LUCK. I came up with this idea today though--- download theB130 rollback from nougat to MarshMallow update.zip. Extract the update.app and put that in my sd-card/dload folder and do 3 button install method.
I might even do the same with the nougat B350 just to cover all bases. So i am downloading now, gonna cross my fingers and any other body parts, pray to all the gods...and hopefully i wont be a crying,sniveling,howling piece of mess by tomorrow.
UNLESS OF COURSE SOMEONE HAS THE KNOWLEDGE I SEEK AND IS WILLING TO SHARE IT :fingers-crossed:
thanks Honor-able friends....
Click to expand...
Click to collapse
OK, sorry for the misunderstanding. Yeah, try that and if this is still not working, I guess all you can do is try the same with other packages.
I have a Blu R1 HD that I have been on again off again fiddling with for a few months that is soft bricked. It will turn on but it will hang on the second "Bold like us" splash screen after the animation ends. It had no recovery installed to it prior to the bricking, I have attempted flashing a stock rom to it with SPFT but It gets interrupted less then 3 seconds in. From my reading It seems like I have the 6.6 preloader that stopped spft from working.
Is there anything that could be done with this to get it working once again?
kamikazisolly said:
I have a Blu R1 HD that I have been on again off again fiddling with for a few months that is soft bricked. It will turn on but it will hang on the second "Bold like us" splash screen after the animation ends. It had no recovery installed to it prior to the bricking, I have attempted flashing a stock rom to it with SPFT but It gets interrupted less then 3 seconds in. From my reading It seems like I have the 6.6 preloader that stopped spft from working.
Is there anything that could be done with this to get it working once again?
Click to expand...
Click to collapse
Depends on few things.
Do you know what was last thing done before this brick?
Have you tried holding volume up when powering on, to enter recovery(stock, i know you mentioned no custom recovery installed)?
It goes to and past the animation , so i don't think it is a secure boot type of failure. But maybe a bad data problem. See above statement about recovery.
mrmazak said:
Depends on few things.
Do you know what was last thing done before this brick?
Have you tried holding volume up when powering on, to enter recovery(stock, i know you mentioned no custom recovery installed)?
It goes to and past the animation , so i don't think it is a secure boot type of failure. But maybe a bad data problem. See above statement about recovery.
Click to expand...
Click to collapse
I have gone into the stock recovery menu, And i have attempted factory data reset, clearing the cache, and a root integrity check. The integrity check says one item fails the check and that is "/system/lib/libLLVM.so"
The last thing that I recall happening is that I had a pop up saying that an app had stopped working, But it reappeared immediately after closing it again several times. I thought rebooting it would stop whatever was happening, but it never came back to the OS.
The device has a small crack on the bottom right hand side of the screen that happened when it fell from my pocket on top of a ladder. A family member who also works with electronics as a hobby thinks that may have something to do with it but the phone worked for weeks after the break happened.
kamikazisolly said:
I have gone into the stock recovery menu, And i have attempted factory data reset, clearing the cache, and a root integrity check. The integrity check says one item fails the check and that is "/system/lib/libLLVM.so"
The last thing that I recall happening is that I had a pop up saying that an app had stopped working, But it reappeared immediately after closing it again several times. I thought rebooting it would stop whatever was happening, but it never came back to the OS.
The device has a small crack on the bottom right hand side of the screen that happened when it fell from my pocket on top of a ladder. A family member who also works with electronics as a hobby thinks that may have something to do with it but the phone worked for weeks after the break happened.
Click to expand...
Click to collapse
I do not know if there will be any way forward with this.
As you are not bootloader unlocked, sp flash refuses to connect, and only thing that can be done on stock is "factory reset" did not help, you might be done , other that see if can send to Blu.
mrmazak said:
I do not know if there will be any way forward with this.
As you are not bootloader unlocked, sp flash refuses to connect, and only thing that can be done on stock is "factory reset" did not help, you might be done , other that see if can send to Blu.
Click to expand...
Click to collapse
Sending to blu isnt an option. Out of waranty period, And I also opened it to make sure there was nothing obviously physically wrong.
I also tried using the dirty cow tool, But i cant seem to see the device in ADB. Fast boot however, can see it.
Update over ADB/SD in the stock recovery wouldn't lead me anywhere would they?
Trying to give the mother in law my old N6. It was rooted / bootloader unlocked. First attempt was to factory reset from within the OS. That worked fine, until I rebooted... it wouldn't boot.
I then downloaded the Shamu factory images from Google's website (shamu-n6f27m-factory-bf5cce08) and ran the flash-all.bat script. Multiple errors showed up during the script... but I chalked it up to ADB looking for boot slots etc, whereas this one has none.
Phone booted fine. Installed apps, set up the phone, power cycled it and promptly entered a bootloop.
Ran flash.all again, phone booted fine. Flashed TWRP, booted into recovery, checked things out in there (didn't do anything but flash the TWRP) tried to reboot, phone bootloops.
Flashed TWRP, booted into Recovery, tried to erase system, etc.... multiple errors again. Booted into bootloader, ran Flash-all... phone boots. Installed some apps, rebooted phone and bootloop again.
Then I did something REALLY stupid, I locked the bootloader from ADB. Now I'm on the bootloader, but can't OEM unlock because it's asking me to boot into the OS and enable the ability from Developer options.
I've no idea why this phone is doing this - booting fine into the OS once and then getting into a bootloop every time thereafter.
If anyone can shed some light on this, I'd appreciate it. Also, how in the hell do I unlock the bootloader now that I've locked it and I can't boot into the OS or run the Flash-all.bat anymore since it's locked?
Is your recovery stock? If it is, sideload the last OTA from Google and that should get you back into Android so you can toggle the OEM Unlock button.
Thanks. I was getting the "no command" on Stock recovery. Finally fixed this freaking issue after multiple flashes and wipes and everything else I could think of. Finally got it sorted.
usafle said:
Thanks. I was getting the "no command" on Stock recovery. Finally fixed this freaking issue after multiple flashes and wipes and everything else I could think of. Finally got it sorted.
Click to expand...
Click to collapse
So did you finally figure out what it could have been that you were doing wrong?
Strephon Alkhalikoi said:
So did you finally figure out what it could have been that you were doing wrong?
Click to expand...
Click to collapse
No. I could only assume I had messed something up when I was using it back in the day and really hosed something up. System wouldn't wipe, cache wouldn't wipe, userdata wouldn't wipe in "fasboot" just kept getting "unable to find XXXX".
So multiple flashes into TWRP and bootloops trying to really REALLY wipe the device finally fixed it. I just kept erasing / wiping every partition I could find in Stock Recovery, TWRP, and with fastboot commands. Finally I got them all wiped/cleared and was able to flash the stock OS back on and have it 'stick'.
Hello everyone!
I have a Pixel 4XL, bought it when the phone was released. Phone is fully stock, not rooted or flashed with any custom ROM, the bootloader is also not unlocked.
I pulled my phone out of my pocket yesterday and it was on the google logo loading screen that you usually see when you boot up the phone. I assumed that it restarted itself because it was too hot (it felt sort of hot to the touch). But the phone never rebooted itself, it was stuck in the booting screen forever.
I then tried various ways to restart the phone, through recovery mode etc. However, I couldn't get my phone to boot back up. I have yet to try factory resetting the phone as I do have some files in the phone I really would like to keep. Is there any other way to resolve this without a full device data wipe/reset?
Thank a lot in advance!!
andchiang said:
Hello everyone!
I have a Pixel 4XL, bought it when the phone was released. Phone is fully stock, not rooted or flashed with any custom ROM, the bootloader is also not unlocked.
I pulled my phone out of my pocket yesterday and it was on the google logo loading screen that you usually see when you boot up the phone. I assumed that it restarted itself because it was too hot (it felt sort of hot to the touch). But the phone never rebooted itself, it was stuck in the booting screen forever.
I then tried various ways to restart the phone, through recovery mode etc. However, I couldn't get my phone to boot back up. I have yet to try factory resetting the phone as I do have some files in the phone I really would like to keep. Is there any other way to resolve this without a full device data wipe/reset?
Thank a lot in advance!!
Click to expand...
Click to collapse
You can try rescue mode and using the tool Google has online. https://pixelrepair.withgoogle.com/
Depending on the issue and what the tool has to do it may factory reset it.
Thank you! I will give it a shot!
I was hoping that sideloading the May update OTA would revive my phone but it didn't happen so I had to cut my losses and factory reset the phone. I really hope this never happens again...
As my phone was stock and the software never altered, what would cause a bootloop like mine?
andchiang said:
I was hoping that sideloading the May update OTA would revive my phone but it didn't happen so I had to cut my losses and factory reset the phone. I really hope this never happens again...
As my phone was stock and the software never altered, what would cause a bootloop like mine?
Click to expand...
Click to collapse
A friend had the same issue. It appeared that his power button actually got stuck internally so he tried to press it from lets say different angles. It worked, he saved all his data and was fine.