Database Develop

[Q] Reset to stock firmware

Hi guys I am a newbie in the android/root/unlock world and now I am really confused. I've spent 4 hours searching both on this forum and the rest of the internet but I thought to open this thread to clarify my doubts out.
I've rooted some months ago and I've installed the MoDaCo Rom, now I'd like to reset my handset to the original firmware.
From the bootloader I can see that I got HBOOT 1.54 so I can't get S-OFF. What I didn't understand is whether I can reset to the stock firmware somehow or not. If so, can you please link a step by step procedure?
Thanks and I do really apologize for my silly question because I know that searching for the right words I'd have already found the answer

Use the command
Code:
fastboot getvar all
in fastboot mode and post the output here deleting imei and serial ID
So, we can see your firmware version.
Can you remember if when you unlocked the phone you was on 1.54 hboot and 2.xx.xxx.x firmware?

Guich said:
Use the command
Code:
fastboot getvar all
in fastboot mode and post the output here deleting imei and serial ID
So, we can see your firmware version.
Can you remember if when you unlocked the phone you was on 1.54 hboot and 2.xx.xxx.x firmware?
Click to expand...
Click to collapse
thanks for your reply. Unfortunately I can't remember what hboot and firmware version was my phone on when I unlocked it.
Here are the info that you requested
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: XXXXXX
(bootloader) imei: XXXXXX
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3870mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0

Use this rom/guide for restore your phone like stock
You have to donwload the same zip of your version-main:
Code:
2.24.401.1

thanks again.
Let me understand what I am going to do... I am going to install a stock ROM as I did before for the MoDaCo rom but I am not going back in time when I bought the phone, right?
My phone will be always unlocked? If I'd like to reset completely my phone re-locking it, would that be possible?
Thanks, in advance

The rom i've linked will install the stock recovery, rom and radio
After this, you can relock your phone with the command:
Code:
fastboot oem lock
.
When you've used this command, you will see relocked in bootloader and this is like stock, and you can get the ota.
However, i will advice you to acheive the s-off if it will come out for 1.54/1.55 hboot, because, with this, you can restore your phone like as you bought it!

thanks again mate.
I'll wait then, you've been very very very clear

22764636 said:
thanks again mate.
I'll wait then, you've been very very very clear
Click to expand...
Click to collapse
:good:

[Q] What does this mean in my bootloader?

Ok, this is my fasboot getvar all:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.206.7
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3801mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d959c75800
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
My phone is back to completely stock now and I need to return to s-on for repairs
What does the dirty bootloader mean and how will that affect my phone if I do fastboot oem writesecureflag 3?

stovie_steve said:
What does the dirty bootloader mean
Click to expand...
Click to collapse
touch of jobo said:
The commit number refers to the code repository that devs at HTC use. Every time a dev commits code to the repo, that commit gets a unique number.
Their build server checks out the repo and adds the latest commit number to some macro or header, so that products can report it.
A dirty build only recompiles the files that were modified and their dependencies. A clean build removes all object code and recompiles everything.
So the commitno is an identifier that HTC devs can use to go back in time and checkout the exact same code that your hboot was built from.
Click to expand...
Click to collapse
stovie_steve said:
how will that affect my phone if I do fastboot oem writesecureflag 3?
Click to expand...
Click to collapse
It will turn you phone back to S-ON and it will look like this:
stovie_steve said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.206.7
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3801mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d959c75800
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Click to expand...
Click to collapse

Lol I know it will do that, but will it result in a tampered message in my bootloader even if I'm completely back to stock, no modified hboot and locked bootloader?

stovie_steve said:
Lol I know it will do that, but will it result in a tampered message in my bootloader even if I'm completely back to stock, no modified hboot and locked bootloader?
Click to expand...
Click to collapse
it shouldn't

Many thanks for replying
I originally downgraded my hboot to 1.44 after getting s off with rumrunner. I then restored a 1.29 base nandroid and proceeded to take all the ota updates for my 02___001 cid. So this would have flashed stock Rom, stock recovery and stock hboot yes? So going to s on should work yes?

stovie_steve said:
Many thanks for replying
I originally downgraded my hboot to 1.44 after getting s off with rumrunner. I then restored a 1.29 base nandroid and proceeded to take all the ota updates for my 02___001 cid. So this would have flashed stock Rom, stock recovery and stock hboot yes? So going to s on should work yes?
Click to expand...
Click to collapse
yes it should work without any issue

It didn't work!
When I reboot my phone I got a message saying tampered detected - rebooting
Now my phone reads locked, tampered and s-on

stovie_steve said:
It didn't work!
When I reboot my phone I got a message saying tampered detected - rebooting
Now my phone reads locked, tampered and s-on
Click to expand...
Click to collapse
you should never have gone back to s-on, the only way to get rid of the tampered is to run a RUU, now you are s-on you will no longer be able to do this. so you will be stuck now with what you have I believe, you can remove tampered but you need to be s-off to run code.
sorry, believe you are stuck where you are.

scifitrekkie said:
you should never have gone back to s-on, the only way to get rid of the tampered is to run a RUU, now you are s-on you will no longer be able to do this. so you will be stuck now with what you have I believe, you can remove tampered but you need to be s-off to run code.
sorry, believe you are stuck where you are.
Click to expand...
Click to collapse
No I am not stuck where I am - I can unlock the bootloader again via HTC dev, install custom recovery and do a Guru reset to achieve S-off again. I've done this before.
I can get s-off again and I have a RUU for a stock european firmware. I can change my CID for HTC__001 and update right up to 3.62.401.1 firmware. That'll put my device to complete stock
Do HTC know that my device was originally locked to O2-UK?
If so, will o2 care that my phone is s-off? Cos I can get s-off and leave the bootloader locked

[Q] Get my device to stock rom

Hello,
I was trying to root my device, i unlocked bootloader and installed custom recovery, i did something wrong on the way and im not sure what.
currently the bootloader shows: "TAMPERED" and "RELOCKED".
i wanted to install RUU and i dont know what RUU i should install.
Thanks for helpers!
additional information :
fastboot getvar version-main
version-main:
***why is it blank??
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4D.18.3250.18
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: T-MOB101
(bootloader) battery-status: good
(bootloader) battery-voltage: 4171mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0

alon121 said:
Hello,
I was trying to root my device, i unlocked bootloader and installed custom recovery, i did something wrong on the way and im not sure what.
currently the bootloader shows: "TAMPERED" and "RELOCKED".
i wanted to install RUU and i dont know what RUU i should install.
Thanks for helpers!
additional information :
fastboot getvar version-main ****why is
version-main: ****it blank??
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4D.18.3250.18
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: WHAT UP HOMIE
(bootloader) imei: DONT SEE THIS
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: T-MOB101
(bootloader) battery-status: good
(bootloader) battery-voltage: 4171mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
Hey,
Just unlock it again. You didn't flash the stock recovery.img so you can't boot up into your ROM. Just unlock it and go through the process again. I see you are using t-mobile. just head over to THIS THREAD find 'RUU_M7_UL_JB_50_TMOUS_1.27.531.11_Radio_4A.17.3250 .20_10.40.1150.04_release_324846_signed.exe' and run the exe. hope this helps man.
WHOOPSIE/ EDIT: Forgot to mention the S-off thanks for pointin that out

Bllooi said:
Hey,
Just unlock it again. You didn't flash the stock recovery.img so you can't boot up into your ROM. Just unlock it and go through the process again. I see you are using t-mobile. just head over to THIS THREAD find 'RUU_M7_UL_JB_50_TMOUS_1.27.531.11_Radio_4A.17.3250 .20_10.40.1150.04_release_324846_signed.exe' and run the exe. hope this helps man.
Click to expand...
Click to collapse
do i have to unlock and flash stock recovery to install the RUU?
thank u for the help.

alon121 said:
do i have to unlock and flash stock recovery to install the RUU?
thank u for the help.
Click to expand...
Click to collapse
1- edit your post and remove IMEI and s/n
2- ask whoever quoted you to do the same
3- that RUU is not going to work, because:
......a- you are S-On, and for a downgrade to work you need to be S-Off
......b- the RUU isnt even meant for your model !!!!!
Code:
modelid: PN0713000
cid: T-MOB010
you have MID PN0710000 !!!!
from hboot & radio, your firmware should be 2.24.111.5 (German T-Mobile right?) or close to that, recommend you get S-Off using rumrunner.
so unlock bootloader, get yourself a suitable rom, and achieve s-off using rumrunner.

nkk71 said:
1- edit your post and remove IMEI and s/n
2- ask whoever quoted you to do the same
3- that RUU is not going to work, because:
......a- you are S-On, and for a downgrade to work you need to be S-Off
......b- the RUU isnt even meant for your model !!!!!
Code:
modelid: PN0713000
cid: T-MOB010
you have MID PN0710000 !!!!
from hboot & radio, your firmware should be 2.24.111.5 (German T-Mobile right?) or close to that, recommend you get S-Off using rumrunner.
so unlock bootloader, get yourself a suitable rom, and achieve s-off using rumrunner.
Click to expand...
Click to collapse
I unlocked my bootloader and got s-off.
should i flash a custom recovery?
can u point me at a suitable rom so i wont get a wrong one?
thanks.

alon121 said:
I unlocked my bootloader and got s-off.
should i flash a custom recovery?
can u point me at a suitable rom so i wont get a wrong one?
thanks.
Click to expand...
Click to collapse
quick question: do you want (need) to go back to stock? or are happy with custom ROMs?
(basically: what do you the end result to be?)

nkk71 said:
quick question: do you want (need) to go back to stock? or are happy with custom ROMs?
(basically: what do you the end result to be?)
Click to expand...
Click to collapse
actually i dont really care, right now i just want to update my software to kitkat, and currently it doesnt let me.

alon121 said:
actually i dont really care, right now i just want to update my software to kitkat, and currently it doesnt let me.
Click to expand...
Click to collapse
well kitkat isn't out yet except for the US Dev Edition, but you can try any of the ROMs in the development section, you can use @ClydeB1 Index for a list of different ROMs (and other very useful links) http://forum.xda-developers.com/showthread.php?t=2438026
Since you're now S-Off you can also use latest GPE ROMs (as they require S-Off), and also can flash different firmwares;
I usually use firmwares from http://forum.xda-developers.com/showthread.php?t=2365506
and radios from here http://forum.xda-developers.com/showthread.php?t=2419699
Also, at the moment the recommended recovery to use is TWRP 2.6.3.3 http://techerrata.com/browse/twrp2/m7
or TWRP 2.6.3.4 http://techerrata.com/browse/twrp2/m7ul

[Q] How do i proceed at this point? Unlocked hboot, CWM Recovery

Hi. i am noob whit this kind of stuff, Rootting flashing etc.. But yes i manage to unlock my hboot and install a customrecovery. My question is now what i can do now, and how i can do it. how i proceed whit this. i'd like to upgrade my HTC one to google play edition (Android revolution hd) or is there a better? I am now running Android 4.4.2 whit sense 5.5
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.23.3263.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.401.8
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:---
(bootloader) imei: --
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 4089mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
So what i must do to make my phone shine Thanks allready !
i don't know if this is not in a right place Sorry for my bad english. (Finland)

Superpulla said:
Hi. i am noob whit this kind of stuff, Rootting flashing etc.. But yes i manage to unlock my hboot and install a customrecovery. My question is now what i can do now, and how i can do it. how i proceed whit this. i'd like to upgrade my HTC one to google play edition (Android revolution hd) or is there a better? I am now running Android 4.4.2 whit sense 5.5
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.23.3263.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.401.8
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:---
(bootloader) imei: --
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 4089mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
So what i must do to make my phone shine Thanks allready !
i don't know if this is not in a right place Sorry for my bad english. (Finland)
Click to expand...
Click to collapse
instruction on how to flash arhd gpe can be found in the op of that rom thread... http://forum.xda-developers.com/showthread.php?t=2356654

Can you take a clean backup using twrp first and copy to your computer.
As you are on 4.4.2 official moonshine may not work but you will need soff to save your ass in case of bootloops or something weirder

so..
SaHiLzZ said:
Can you take a clean backup using twrp first and copy to your computer.
As you are on 4.4.2 official moonshine may not work but you will need soff to save your ass in case of bootloops or something weirder
Click to expand...
Click to collapse
So you are saying that there is no way yet to make it "safe" because i have the neverst andoird version?
Rumrunner needs 1.55 hboot, and i got 1.56. Can someone please quide me step by step to the victory this is exhausting
how do i get soff ? rumrunner says that it needs 1.55 and i got 1.56? can use it anyways to make my phone s off?

Superpulla said:
So you are saying that there is no way yet to make it "safe" because i have the neverst andoird version?
Rumrunner needs 1.55 hboot, and i got 1.56. Can someone please quide me step by step to the victory this is exhausting
how do i get soff ? rumrunner says that it needs 1.55 and i got 1.56? can use it anyways to make my phone s off?
Click to expand...
Click to collapse
Many users reported successfully s-off'ed their device with rumrunner on hboot 1.56.

alray said:
Many users reported successfully s-off'ed their device with rumrunner on hboot 1.56.
Click to expand...
Click to collapse
counting on you now! And one more thing, How do i backup my device incase bootloop?:fingers-crossed:

Superpulla said:
counting on you now! And one more thing, How do i backup my device incase bootloop?:fingers-crossed:
Click to expand...
Click to collapse
like @SaHiLzZ said make a nandroid backup of your device just in case. When you will get s-off you can restore your device to stock with a .401 ruu.

alray said:
like @SaHiLzZ said make a nandroid backup of your device just in case. When you will get s-off you can restore your device to stock with a .401 ruu.
Click to expand...
Click to collapse
so i make nandroid backup ".img" and if my phone goes to bootloop. i can fix it whit that .img i make. am i getting it?:highfive:

Superpulla said:
so i make nandroid backup ".img" and if my phone goes to bootloop. i can fix it whit that .img i make. am i getting it?:highfive:
Click to expand...
Click to collapse
and be sure to make a copy of that .img on your computer

What recovery do you have installed? When you go into the recovery, there will be an option to backup the device. Use that to back it up. You can then copy that backup to your PC for safe keeping.

Ghost said:
What recovery do you have installed? When you go into the recovery, there will be an option to backup the device. Use that to back it up. You can then copy that backup to your PC for safe keeping.
Click to expand...
Click to collapse
i have CWM. and it is creating zip file. now i just copy that to my computer, and then i use rumrunner to make my phone s-off and after that i can instal rom using cwm?

Ghost said:
What recovery do you have installed? When you go into the recovery, there will be an option to backup the device. Use that to back it up. You can then copy that backup to your PC for safe keeping.
Click to expand...
Click to collapse
How do i get that backup to my computer? i need root! but i don't have it yet. i must get backup to my computer and then use rumrunner to make s-off?

Need help to get S-off. tried all possible

Hi everyone! I have a problem, I tried to make S-off with all available here on the site, and it did not work out (rumrunner hanging on pounding ........ and firewater is also something same on bottle 1). Bootloader is in state tampered.
Here is my data
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.54.401.51 (this version was set by misctool, (before there was 4.19.401.8) I thought that perhaps i can flash older firmware tht can make rumrunner to work)
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH3AGW901978
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 4278mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I do not know what else can help make S-off, probably tried all possible methods. Maybe, someone also went through this agony with S-off
I would also add that I tried to restore the firmware using Guru_Reset_M7_2.24.401.8 and then OTA update but it only caused permanent bootloot

pankozin said:
Hi everyone! I have a problem, I tried to make S-off with all available here on the site, and it did not work out (rumrunner hanging on pounding ........ and firewater is also something same on bottle 1). Bootloader is in state tampered.
Here is my data
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.54.401.51 (this version was set by misctool, (before there was 4.19.401.8) I thought that perhaps i can flash older firmware tht can make rumrunner to work)
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH3AGW901978
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 4278mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I do not know what else can help make S-off, probably tried all possible methods. Maybe, someone also went through this agony with S-off
I would also add that I tried to restore the firmware using Guru_Reset_M7_2.24.401.8 and then OTA update but it only caused permanent bootloot
Click to expand...
Click to collapse
There is already a thread discussing about s-off on hboot 1.56 here
you'll probably find an answer there.
Afaik you'll need a rooted rom + an unsecured kernel to achieve s-off.

alray said:
There is already a thread discussing about s-off on hboot 1.56 here
you'll probably find an answer there.
Afaik you'll need a rooted rom + an unsecured kernel to achieve s-off.
Click to expand...
Click to collapse
I tried 5 different roms. dont know about kernels, i think this roms have unsecured kernels. but mb i need to install it separately??? I read this thred u suggested, but it didnt help. Now im on ARHD 62.0. what kernel should i try?
I really literally read all posts over internet but nothing helped. Or i dont understand something about this process. so i created a thread for it

pankozin said:
I tried 5 different roms. dont know about kernels, i think this roms have unsecured kernels. but mb i need to install it separately??? I read this thred u suggested, but it didnt help. Now im on ARHD 62.0. what kernel should i try?
I really literally read all posts over internet but nothing helped. Or i dont understand something about this process. so i created a thread for it
Click to expand...
Click to collapse
arhd already comes with the required kernel. have tried arhd 53?

alray said:
arhd already comes with the required kernel. have tried arhd 53?
Click to expand...
Click to collapse
I tried 53 and 31.6. just dont know what can i do more. I feel like i changed something crucial in firmware or something so now nothing works (

pankozin said:
I tried 53 and 31.6. just dont know what can i do more. I feel like i changed something crucial in firmware or something so now nothing works (
Click to expand...
Click to collapse
s-off is hard to achieve on hboot 1.56 and doesn't work for everyone. Maybe you could just wait for a better s-off solution for 1.56.

alray said:
s-off is hard to achieve on hboot 1.56 and doesn't work for everyone. Maybe you could just wait for a better s-off solution for 1.56.
Click to expand...
Click to collapse
Where can i find firmware to flash in S-ON state? i heard tht signed one may suite.

alray said:
s-off is hard to achieve on hboot 1.56 and doesn't work for everyone. Maybe you could just wait for a better s-off solution for 1.56.
Click to expand...
Click to collapse
Hey i got this problem when using rumrunner "adbd can not run as root in production builds"