Database Develop

[Q] How to change model id!!!

Hi i recently bought a second hand incredible s, it has black rose and custom rom.In the back cover inside the phone in the place that writes the imei the serial number and the model number witch mine is PG3213, so i decided to download the ruu for this model id , i run it and i got error 130.I then start typing fastboot get var all and i saw that the model number was PG3212!!!!!Some how the previous user change the model id number.So i extract the rom from the ruu i change the model id number in the android-info.txt, i zip it in a PG32IMG.ZIP and it installed successfully.I then go to make the updates and the update fails.I have stock recovery but i think that the black rose stop the update.So i want to ask how i can change the model id back to the original to rum the ruu for fully stock again and update over the air.
Thanks

Anoubis282 said:
Hi i recently bought a second hand incredible s, it has black rose and custom rom.In the back cover inside the phone in the place that writes the imei the serial number and the model number witch mine is PG3213, so i decided to download the ruu for this model id , i run it and i got error 130.I then start typing fastboot get var all and i saw that the model number was PG3212!!!!!Some how the previous user change the model id number.So i extract the rom from the ruu i change the model id number in the android-info.txt, i zip it in a PG32IMG.ZIP and it installed successfully.I then go to make the updates and the update fails.I have stock recovery but i think that the black rose stop the update.So i want to ask how i can change the model id back to the original to rum the ruu for fully stock again and update over the air.
Thanks
Click to expand...
Click to collapse
You aren't supposed to be using an RUU when you have blackrose. Instead, you're supposed to be reverting blackrose...... Blackrose is a custom bootloader and an RUU will not run because of it (or if your bootloader is unlocked for that matter).

Yes i understand that i have unistalled black rose but the model id remains changed.I extracted the rom zip from the ruu and instaled successfully via PG32IMG but when i perform ota it goes to the red triangle of recovery and fails.I check the otas android info.txt and the model id is different than mine.so i think that this is the reason the update fails....I have stock recover with stock hboot alla stock after the PG32IMG......I want to change the model id i think.....

Anoubis282 said:
Yes i understand that i have unistalled black rose but the model id remains changed.I extracted the rom zip from the ruu and instaled successfully via PG32IMG but when i perform ota it goes to the red triangle of recovery and fails.I check the otas android info.txt and the model id is different than mine.so i think that this is the reason the update fails....I have stock recover with stock hboot alla stock after the PG32IMG......I want to change the model id i think.....
Click to expand...
Click to collapse
That's because you're not supposed to run RUU's with Blackrose bootloader. You need to revert it first....

I uninstall blackrose but it happens the same .I am sure that the probem is in the different mid.....If anyone knows if the blackrose supports the fastboot oem wite mid command???

Anoubis282 said:
I uninstall blackrose but it happens the same .I am sure that the probem is in the different mid.....If anyone knows if the blackrose supports the fastboot oem wite mid command???
Click to expand...
Click to collapse
Can u post whats in your bootloader
Sent from my Nexus 5 using XDA Free mobile app

(bootloader) version: 0.5
(bootloader) version-bootloader: 2.03.0000
(bootloader) version-baseband: 3805.06.03.03_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) serialno: HT17PTD05680
(bootloader) imei: 8888888888888888
(bootloader) product: vivo
(bootloader) platform: HBOOT-7630
(bootloader) modelid: PG3212***
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4030mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-3b35dcea
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
all: Done!
Hi i have problems on changing mid.it dose not chage it says Main MID dose not match [PG3211] OR [PG3211]!

Anoubis282 said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.03.0000
(bootloader) version-baseband: 3805.06.03.03_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) serialno: HT17PTD05680
(bootloader) imei: 8888888888888888
(bootloader) product: vivo
(bootloader) platform: HBOOT-7630
(bootloader) modelid: PG3212***
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4030mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-3b35dcea
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
all: Done!
Hi i have problems on changing mid.it dose not chage it says Main MID dose not match [PG3211] OR [PG3211]!
Click to expand...
Click to collapse
Does it say blackrose in yiur bootloader?
Sent from my Nexus 5 using XDA Free mobile app

Yes..i have blackrose instaled.......
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://postimg.org/image/7ntzpdhnj/

Anoubis282 said:
Yes..i have blackrose instaled.......
http://postimg.org/image/7ntzpdhnj/
Click to expand...
Click to collapse
so revert it..... what the heck? you told me you reverted it before....

I put it back
072665995 said:
so revert it..... what the heck? you told me you reverted it before....
Click to expand...
Click to collapse
Yeah i installed it again.....When i uninstalled it then i instal the pg32img that extracted from ruu and installed successfully.but when i receive the ota and the phone restart to update it stucks in red triangle....so i thought that the problem is in different mid so i put back blackrose to change the mid but i cant i am getting the error i mentioned in previous post.When i tried to run the ruu.exe i got error in mid number....so i cant run the ruu exe from the pc....

Anoubis282 said:
Yeah i installed it again.....When i uninstalled it then i instal the pg32img that extracted from ruu and installed successfully.but when i receive the ota and the phone restart to update it stucks in red triangle....so i thought that the problem is in different mid so i put back blackrose to change the mid but i cant i am getting the error i mentioned in previous post.When i tried to run the ruu.exe i got error in mid number....so i cant run the ruu exe from the pc....
Click to expand...
Click to collapse
Ok revert blackrose because there is no way you're running an RUU properly with a custom bootloader installed. Second, when you run the RUU from your PC, report the error number (i suspect it is 131 but post it anyways)

Error 130
072665995 said:
Ok revert blackrose because there is no way you're running an RUU properly with a custom bootloader installed. Second, when you run the RUU from your PC, report the error number (i suspect it is 131 but post it anyways)
Click to expand...
Click to collapse
It says error 130......

HTC ONE (dual SIM) dead

Yes, I am retard of the day.
I tried downgrading hboot to 1.44. Don't ask me why. I was on 2.44.
It was 100% success in CMD. On the phone, progress bar did not go full.
I restarted phone, and now I get only black screen. When I connect it to the PC, I heard connection sound.
Now I can't do anything with CMD. I tried connecting with Squabbia HTC One toolkit, and I tried getvar all:
Code:
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: UNKNOWN
(bootloader) serialno:
(bootloader) imei: 355195000000010 ([U][B]THIS IS NOT MY IMEI[/B][/U])
(bootloader) meid: 00000000000000
(bootloader) product:
(bootloader) platform: HBOOT-8064
(bootloader) modelid: *********
(bootloader) cidnum:
(bootloader) battery-status: good
(bootloader) battery-voltage: 3836mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: UNKNOWN
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.034s
Any advice?

SpineSurgery said:
I tried downgrading hboot to 1.44. Don't ask me why. I was on 2.44.
Click to expand...
Click to collapse
I have no idea why I'm even replying, but: Why can't we ask?
... and why did you think an m7_u/ul hboot would be good for your m7xxxxxx ? what model do you have?

nkk71 said:
I have no idea why I'm even replying, but: Why can't we ask?
... and why did you think an m7_u/ul hboot would be good for your m7xxxxxx ? what model do you have?
Click to expand...
Click to collapse
It is just an expression... "don't ask". Of course you can ask. I was trying to get my phone back to 100% stock for past two days... And for some reason I thought that HTC ONE and HTC ONE DUAL SIM hboot's are the same.
My phone model is:
M7C_DUG – Device ID: HTC 802w
Networks: Dual Sim W-CDMA/GSM
MID: PN0771000, PN0772000
Region: China, Russia, Europe

SpineSurgery said:
It is just an expression... "don't ask". Of course you can ask. I was trying to get my phone back to 100% stock for past two days... And for some reason I thought that HTC ONE and HTC ONE DUAL SIM hboot's are the same.
My phone model is:
M7C_DUG – Device ID: HTC 802w
Networks: Dual Sim W-CDMA/GSM
MID: PN0771000, PN0772000
Region: China, Russia, Europe
Click to expand...
Click to collapse
Well MIDs are quite "sensitive" (and I'm pretty sure you had to edit the android-info.txt, to actually get your MID in there, for it to flash... even with S-OFF, it would have given you an MID mismatch) and unless you're into some serious testing and bricking mood, you should have done more research!
I'll just leave these two threads here:
http://forum.xda-developers.com/showthread.php?t=2617159
http://forum.xda-developers.com/showthread.php?t=2495697
maybe they can help you.
If (yes, it's a big if) you are able to get back to an hboot which is appropriate for your phone, then maybe you can get it back up and running using a ruu.zip flash.
By the way, you can only have one MID, not two!! so just copy/pasting information from a different thread, such as:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
doesn't really help.
Anyway, Good Luck!

nkk71 said:
Well MIDs are quite "sensitive" (and I'm pretty sure you had to edit the android-info.txt, to actually get your MID in there, for it to flash... even with S-OFF, it would have given you an MID mismatch) and unless you're into some serious testing and bricking mood, you should have done more research!
I'll just leave these two threads here:
http://forum.xda-developers.com/showthread.php?t=2617159
http://forum.xda-developers.com/showthread.php?t=2495697
maybe they can help you.
If (yes, it's a big if) you are able to get back to an hboot which is appropriate for your phone, then maybe you can get it back up and running using a ruu.zip flash.
By the way, you can only have one MID, not two!! so just copy/pasting information from a different thread, such as:
doesn't really help.
Anyway, Good Luck!
Click to expand...
Click to collapse
The first one (MID) is that I have.
I will check links you've sent.
If no success, I will get this phone to my friend who is professional GSM unlocker and repair center and has box for HTC repair.
Thank you!

[SOLVED] REQUEST how to unroot htc one full stock

Am s-off and I need to get back to stock for warrenty
device CID HTC__J15
emirates UAE
cant find correct RUU
raido 4A.25.3263.21 DONT know if it was modified but i did not modified any radio or CID before
if rom installation changes it i dont know im noob
hboot 1.56.0000 modified for no red warning
read a thread says this is the RUU for middle east is it right is it safe to use older RUU to restore am really new to this
http://www.htc1guru.com/dld/ruu_m7_...0-38r-1157-04l_release_353069_signed_2-1-exe/
in samsung i only need odin and stock Rom Here is a whole different situation

Iloudsan said:
Am s-off and I need to get back to stock for warrenty
device CID HTC__J15
emirates UAE
cant find correct RUU
raido 4A.25.3263.21 DONT know if it was modified but i did not modified any radio or CID before
if rom installation changes it i dont know im noob
hboot 1.56.0000 modified for no red warning
read a thread says this is the RUU for middle east is it right is it safe to use older RUU to restore am really new to this
http://www.htc1guru.com/dld/ruu_m7_...0-38r-1157-04l_release_353069_signed_2-1-exe/
in samsung i only need odin and stock Rom Here is a whole different situation
Click to expand...
Click to collapse
post the output of "fastboot getvar all" except imei and serialno
yes you can safely apply an older ruu if you have s-off, but first lets be sure if its the right one for your phone with the "fastboot getvar all"
also post a picture of your bootloader screen.

alray said:
post the output of "fastboot getvar all" except imei and serialno
yes you can safely apply an older ruu if you have s-off, but first lets be sure if its the right one for your phone with the "fastboot getvar all"
also post a picture of your bootloader screen.
Click to expand...
Click to collapse
------------------------------------------------------------
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.25.3263.21
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: SH Deleted it for safety
(bootloader) imei: Deleted it for safety
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 3790mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.084s
----------------------------------------
is it ok to flash RUU with modded Hboot while in s-off
im scared of doing anything Wrong
BOOTLOADER
-------------------------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
dont know why the OS does not show Up
this the file name of the modded hboot
mod_hboot_1.56.0000_M7_4.19.401.11.zip
does RUU install stock hboot???
do i need to restore stock frimware or Hboot before proceeding to RUU installation
is this the file i need http://www.androidfilehost.com/?fid=23329332407579952
ok i took the risk and flashed the RUU my device is now not tempered
but the i dont get the red warning while booting is this means that the hboot did not restored?

Iloudsan said:
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.25.3263.21
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) product: m7_ul
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__J15
Click to expand...
Click to collapse
Do you need to S-On?
EDIT: check my guide http://forum.xda-developers.com/showthread.php?t=2541082
use RUU.ZIP method (post #1, #2, and #4) using the 1.28.401.7 RUU.ZIP from guru
or AFH mirror: http://www.androidfilehost.com/?fid=23329332407584993
S-On/S-Off is your decision, but you should definitely set it LOCKED (not relocked) and untampered.

nkk71 said:
Do you need to S-On?
EDIT: check my guide http://forum.xda-developers.com/showthread.php?t=2541082
use RUU.ZIP method (post #1, #2, and #4) using the 1.28.401.7 RUU.ZIP from guru
or AFH mirror: http://www.androidfilehost.com/?fid=23329332407584993
S-On/S-Off is your decision, but you should definitely set it LOCKED (not relocked) and untampered.
Click to expand...
Click to collapse
I used the ruu i posted and and then installed TWRP for Guru_Bootloader_Reset_1.0
and then accidentally installed root via Twrp
and when i use The RUU again it gives me error 158 image error and hw to get stock recovery after finishing from Guru_Bootloader_Reset_1.0
i think i will get stuck with the recovery at the end but know even the RUU is not installing now again what to do
i wish that i found your thread before i think you the one who will help me through this
and yes i need S-on for the warranty
downgraded hboot to 1.44 to avoid any problem
is RUU files can be used once???

Iloudsan said:
I used the ruu i posted and and then installed TWRP for Guru_Bootloader_Reset_1.0
and then accidentally installed root via Twrp
and when i use The RUU again it gives me error 158 image error and hw to get stock recovery after finishing from Guru_Bootloader_Reset_1.0
i think i will get stuck with the recovery at the end but know even the RUU is not installing now again what to do
i wish that i found your thread before i think you the one who will help me through this
and yes i need S-on for the warranty
downgraded hboot to 1.44 to avoid any problem
is RUU files can be used once???
Click to expand...
Click to collapse
so you still have S-Off right?
please check MD5 on the RUU download, sounds like a corrupt download

nkk71 said:
so you still have S-Off right?
please check MD5 on the RUU download, sounds like a corrupt download
Click to expand...
Click to collapse
yes im still S-off
but the RUU had worked once why is not working again ERROR 158
i am trying it now again
what im doing now is trying to get the device the way it was before the RUU running
maybe it wil work i hope it works

Iloudsan said:
yes im still S-off
but the RUU had worked once why is not working again ERROR 158
i am trying it now again
Click to expand...
Click to collapse
Check md5 first
Sent from my HTC One using Tapatalk

nkk71 said:
Check md5 first
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
how to ??
which application should i use
i dont have .md5 file
dont lnow what am saying

nkk71 said:
Check md5 first
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
i got the RUU to work
before working with the RUU i used guru reset like in your thread
just now the RUU finished
and now waiting it to bootup
and confirm no tampered
locked
to s-on the device
thank you
dont leave me still in need for you
the only step left S-ON

nkk71 said:
so you still have S-Off right?
please check MD5 on the RUU download, sounds like a corrupt download
Click to expand...
Click to collapse
ok now im s-on no tampered and locked
is it good to go for warranty?
now am installing OTAs
you are amazing

Iloudsan said:
ok now im s-on no tampered and locked
is it good to go for warranty?
now am installing OTAs
you are amazing
Click to expand...
Click to collapse
yep it's good to send to warranty, why bother with OTAs, they'll probably update it for you anyway
and if all is good please mark the thread as [SOLVED]

nkk71 said:
yep it's good to send to warranty, why bother with OTAs, they'll probably update it for you anyway
and if all is good please mark the thread as [SOLVED]
Click to expand...
Click to collapse
Thank you.
Hoping to mark the thread now
Just one last question is the camera lens glass (cover) replaceable.
Is it under warranty or I should pay for it to be fixed
I don't know how the he'll did it broke

[Q] Not get update (Red Triangle)

I got htc one. --Relocked-s on-hboot 1.44-stock recovery-- I try download update but ı get red triangle
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

real slim shady said:
I got htc one. --Relocked-s on-hboot 1.44-stock recovery-- I try download update but ı get red triangle
Click to expand...
Click to collapse
Read nkk71's post to find out the error description. Are you S-OFF and did you downgrade your hboot? If so, then you will need to upgrade your hboot to 1.54.

majmoz said:
Read nkk71's post to find out the error description. Are you S-OFF and did you downgrade your hboot? If so, then you will need to upgrade your hboot to 1.54.
Click to expand...
Click to collapse
how can ı upgrade my hboot?

real slim shady said:
how can ı upgrade my hboot?
Click to expand...
Click to collapse
Since you didn't downgrade it, the hboot is not the issue.
What is the error you are getting with the update? Here are some of the variables that the OTA checks.

majmoz said:
Since you didn't downgrade it, the hboot is not the issue.
What is the error you are getting with the update? Here are some of the variables that the OTA checks.
Click to expand...
Click to collapse
no error man. Just red triangle. I enter recovery and try manual setup update. and goes like this:
-apply from phone storage/sd card
-check cid failied
reboot then

real slim shady said:
no error man. Just red triangle. I enter recovery and try manual setup update. and goes like this:
-apply from phone storage/sd card
-check cid failied
reboot then
Click to expand...
Click to collapse
Can you provide a fastboot getvar all except remove the imei and serialno.

majmoz said:
Can you provide a fastboot getvar all except remove the imei and serialno.
Click to expand...
Click to collapse
how can ı do this? factory reset?

real slim shady said:
how can ı do this? factory reset?
Click to expand...
Click to collapse
Install the Minimal ADB and Fastboot Tool
When you get it installed run these commands one at a time with the phone connected to the PC:
Code:
[B][I]adb devices[/I][/B] <-- This should give you your "serial number device"
[B][I]adb reboot bootloader[/I][/B] <-- The phone will boot into bootloader and you will see [COLOR="Blue"]FASTBOOT USB[/COLOR]
[B][I]fastboot devices[/I][/B] <-- Same as adb devices
[B][I]fastboot getvar all[/I][/B] <-- Copy this info to your post but [COLOR="Red"]remove[/COLOR] the [U]imei[/U] and [U]serialno[/U] in the post

majmoz said:
Install the Minimal ADB and Fastboot Tool
When you get it installed run these commands one at a time with the phone connected to the PC:
Code:
[B][I]adb devices[/I][/B] <-- This should give you your "serial number device"
[B][I]adb reboot bootloader[/I][/B] <-- The phone will boot into bootloader and you will see [COLOR="Blue"]FASTBOOT USB[/COLOR]
[B][I]fastboot devices[/I][/B] <-- Same as adb devices
[B][I]fastboot getvar all[/I][/B] <-- Copy this info to your post but [COLOR="Red"]remove[/COLOR] the [U]imei[/U] and [U]serialno[/U] in the post
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.25.3263.21
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HTxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 4233mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.081s

real slim shady said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.25.3263.21
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HTxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 4233mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.081s
Click to expand...
Click to collapse
Let take a different tack. Download and install RUU 4.19.401.9. Scroll down the site until you find the RUU. This will be an update to your phone, once it is installed you will be able to get the Sense 6 update. Sorry for the delay, the other site for RUUs is down.

majmoz said:
Let take a different tack. Download and install RUU 4.19.401.9. Scroll down the site until you find the RUU. This will be an update to your phone, once it is installed you will be able to get the Sense 6 update. Sorry for the delay, the other site for RUUs is down.
Click to expand...
Click to collapse
ok ı download this. my internet speed is slow nowadays so this will be 1 hour.
whatever ı try setup update and when red triangle appears I hit volup+power. Lower yellow articles is:
Finding update package...
Bla bla bla (You may know those)
.
check /data/preload/SoundHound_Freemium.apk failed, error No
such file or directory()
installation aborted.
write host_mode:0 done

real slim shady said:
ok ı download this. my internet speed is slow nowadays so this will be 1 hour.
whatever ı try setup update and when red triangle appears I hit volup+power. Lower yellow articles is:
Finding update package...
Bla bla bla (You may know those)
.
check /data/preload/SoundHound_Freemium.apk failed, error No
such file or directory()
installation aborted.
write host_mode:0 done
Click to expand...
Click to collapse
you have this error because the bootloader is unlocked. unlocking the bootloader wipe all files in /data/preload so when the ota try to patch /data/preload/SoundHound_Freemium.apk it fail because the file no longer exist
restoring with a ruu will solve that issue.

alray said:
you have this error because the bootloader is unlocked. unlocking the bootloader wipe all files in /data/preload so when the ota try to patch /data/preload/SoundHound_Freemium.apk it fail because the file no longer exist
restoring with a ruu will solve that issue.
Click to expand...
Click to collapse
ok ı will do. But Tampered is a problem? Should ı remove it and if how?

real slim shady said:
ok ı will do. But Tampered is a problem? Should ı remove it and if how?
Click to expand...
Click to collapse
tampered is only an issue if you'll have to send the phone for repair under warranty. Otherwise don't worry with this. It can be removed but it require s-off.

alray said:
tampered is only an issue if you'll have to send the phone for repair under warranty. Otherwise don't worry with this. It can be removed but it require s-off.
Click to expand...
Click to collapse
Grey HTC logo appears on my phone , 1/5 update are setup
Error [158]: image error
ROM Update service cant update your phone.
Please get correct ROM Update service and try again. [I translate it, maybe in english little different]

real slim shady said:
Grey HTC logo appears on my phone , 1/5 update are setup
Error [158]: image error
ROM Update service cant update your phone.
Please get correct ROM Update service and try again. [I translate it, maybe in english little different]
Click to expand...
Click to collapse
try this ruu: http://www.androidruu.com/getdownlo...31.27_10.31.1131.05_release_310878_signed.exe

alray said:
try this ruu: http://www.androidruu.com/getdownlo...31.27_10.31.1131.05_release_310878_signed.exe
Click to expand...
Click to collapse
ok but why this one? and should ı be s-off?

real slim shady said:
ok but why this one? and should ı be s-off?
Click to expand...
Click to collapse
its the same version of your phone and its a signed ruu so s-off is not required.

alray said:
its the same version of your phone and its a signed ruu so s-off is not required.
Click to expand...
Click to collapse
I ask for this http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/
this site says s-off required

real slim shady said:
I ask for this http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/
this site says s-off required
Click to expand...
Click to collapse
no, it says: You will need S-off to run the RUU if you have a higher firmware version on your phone currently

[Q] 1.57 - back to stock - tried everything

Hello,
Since it's my first post on the forum let me introduce myself. My name is Marc, I live in the Netherlands and I'm a Java/C software engineer.
I'm trying to flash my phone to stock, since I need a repair. The problem is, however, with my previous repair they changed my phone to HBOOT 1.57. Since then I have a ton of problems. I'm trying to put my phone to stock for about 3 weeks now, but with no success... Everything I have tried. RUU flash, RUU zip-flash, multiple roms, Firewater, Revone everything. But without success.
Can someone please help me! For now, my phone is bricked at RevolutionHD Google Edition in an endless loop. I can (if I'm fast) change language, and than: reboot.
Help will be usefull, an I'll donate to the answer wich help me. Thank you.
Phone details:
HTML:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SECRET
(bootloader) imei: SECRET
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__E11
(bootloader) battery-status: good
(bootloader) battery-voltage: 4267mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!

CupOfThee said:
Hello,
Since it's my first post on the forum let me introduce myself. My name is Marc, I live in the Netherlands and I'm a Java/C software engineer.
Click to expand...
Click to collapse
Hello Marc, welcome the xda
Everything I have tried. RUU flash, RUU zip-flash
Click to expand...
Click to collapse
Your phone is S-ON, Hboot 1.57 and CID/MID confirm you are on a 6.xx.401.x firmware version (erased version-main because of TWRP recovery). So any ruu you'll find will not work on your phone. When S-ON you can only flash RUU that are same version or newer than your firmware version. The latest RUU for your CID is 4.19.401.9. so it can't be used on a s-on phone (or any other ruu version below this one). So you must S-OFF your phone for 2 things.
To be able to flash and RUU to reset your firmware and software to 100% stock
To remove the Tampered flag from the bootloader and also to set it back to *LOCKED* (not RE-LOCKED) so you warranty is valid.
Firewater, Revone everything. But without success.
Click to expand...
Click to collapse
Firewater is discontinued so it will not work (firewater was working with online resources that are not available anymore)
Revone is only able to s-off phones on hboot 1.44 (yours is 1.57)
Sunshine S-OFF is currently the only way you can S-OFF your phone and unfortunately that exploit cost 25$. (you wont pay anything if the exploit doesnt work btw)
Can someone please help me! For now, my phone is bricked at RevolutionHD Google Edition in an endless loop. I can (if I'm fast) change language, and than: reboot.
Click to expand...
Click to collapse
Your phone is bootlooping because this rom require s-off, like its mentioned in the OP of ARHD 6.1:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So what you'll need to do
Achieve S-OFF using Sunshine S-OFF
Removed "Tampered" flag and set your bootloader back to "locked"
flash the 1.28.401.8 ruu.zip
Everything explained in detail in this thread
Read carefully and follow step by step what said in post #1, #2 and #4 (you'll be using the ruu.zip method so skip post #3)
Carefully read the FAQ (post 2), almost every issue that you could have (and how to avoid them) are explained there
then your phone will back to 100% stock and ready for repair under warranty.
---------- Post added at 08:24 AM ---------- Previous post was at 08:19 AM ----------
Forgot to say, sunshine will only work on a stock or close to stock rom so you'll have to flash a rom before attempting to s-off.
This one should do the job: https://www.androidfilehost.com/?fid=95916177934521261
flash it from twrp recovery

Thank you for your time!
For using Sunshine I must have a stable OS, but even that I can't get to work... For now I dont mind the "tampered", I just want the stock rom. Is that possible without S-OFF?

CupOfThee said:
Thank you for your time!
For using Sunshine I must have a stable OS, but even that I can't get to work..
Click to expand...
Click to collapse
try that one linked above

alray said:
try that one linked above
Click to expand...
Click to collapse
I saw it, downloading right now. Tonight I'll try it. For now I have work to do
Work should be forbidden.