[Q] Trusted Locations Broken - Nexus 6 Q&A, Help & Troubleshooting

Is anyone else having trouble with trusted locations? Mine keeps automatically turning itself off after one unlock. For example, I have both my home and work set as trusted locations, but after the first time of unlocking at each location the setting slider will disable and I have to enter my code for each subsequent unlock.
Any advice??

My switch doesn't turn off, but every now and then it likes to make me enter the pattern like I'm away from home and will continue for a whole, then randomly go back to working correctly. Not sure what causes it, maybe the GPS going crazy for a few minutes? Don't know.

Haven't had this happen on the N6 yet, but had this happen on my N5. Not sure why it was happening, but it was frustrating.

Related

TyTN II waking randomly

Hey everyone
Has anyone else noticed that their TyTN II wakes from standby when switching between GPRS and 3G. At least I think this is why mine appears to wake up randomly! It will be sat on my desk in standby mode and then the screen will switch on and the signal strength bars will move.
I've checked to make sure nothing is running in the background and performed a soft reboot.
Any ideas?
Hi
The Kaiser does turn on at least once every hour (some house keeping tasks), and will turn on if the mobile signal is lost. However these on's are in unattended mode which means the device appears off to the owner so the screen will not come on.
If you have some software that likes to do work or updates the today page for example, that software may be detecting the device has turned on and in order to get your attention or just through bad programming, issues a power announcement to say turn on proper, hence the display lights up!
Regards
Phil
Thanks for the info, I'll have a look what I have on there and try and isolate what is causing the power ups.
Cheers for the help.
If you have sprite backup installed with the auto backup on low power option that causes occasional power ups to enable the power check.
I may have solved this issue. After uninstalling enAlarm the phone, no longer appears to be waking. I'm still monitoring it though
i have the same problem when im signed on to AIM. Once i sign off it stops waking up, but if its on it'll wake up every 5 minutes or so, and it is in fact annoying. Havent found out the solution for it yet so i just dont really use it that often
nando223 said:
i have the same problem when im signed on to AIM. Once i sign off it stops waking up, but if its on it'll wake up every 5 minutes or so, and it is in fact annoying. Havent found out the solution for it yet so i just dont really use it that often
Click to expand...
Click to collapse
it's when a friend log's in or out of AIM.. it's a paint, rediculious and ATT refuses to get rid of OZ messanger and use a real one.
here's the kicker. it supposed to use TEXT , but when a friend logs in or out, the message is sent to your phone, and then DATA brings up the list..
STUPID and ignorant of ATT but,. big companies do what they want!
I have been having the same problem as well. I just installed this DeviceLock program:
http://forum.xda-developers.com/showthread.php?t=305402
If you enable the "Lock on Wake" option, the device will be locked when it wakes up, so the backlight stays off and you won't call anyone by accidentally hitting buttons.
Also, I ran across this related thread you might want to check out (basically talking about the same thing, but for the Tilt):
http://forum.xda-developers.com/showthread.php?t=335433

Phone never to lock or time out

with the new blue tooth in my car my phone works perfect but every time it locks it disconnects from the car. I have it set to never timeout but it doesn't seem to work at least for the lock screen, the phone will still lock automatically. I need the phone to never go into the lock screen unless I purposely want it to.. anything out there?
http://www.androlib.com/android.application.com-ooha-awakewidget-zwEp.aspx
?
turboyo said:
with the new blue tooth in my car my phone works perfect but every time it locks it disconnects from the car. I have it set to never timeout but it doesn't seem to work at least for the lock screen, the phone will still lock automatically. I need the phone to never go into the lock screen unless I purposely want it to.. anything out there?
Click to expand...
Click to collapse
Settings --> Application Settings --> Development --> Stay Awake (while charging/plugged in). Check this off.
Note: the behavior of your phone is broken. The bluetooth should NOT disconnect when the screen times out. Something on yours is broken, I don't know what. A wipe might fix this in case it is a setting. Otherwise you should look at the system image you are using and try something else that isn't broken.

Phone is automatically bypassing lockscreen randomly

I'm running lmy48i rooted. Project fi the whole time.
My phone is randomly, not duplicatably, unlocking itself in my pocket, or as I'm holding it. It's not a power button issue, as much as i want it to be. Ambient display is off
I've pulled the phone from my pocket with it unlocked in camera mode, having taken numerous pictures, no on screen buttons working because it's not "unlocked". I've picked up my phone and it unlock itself straight to the home screen, with a good 5 second lag before the lockscreen kicks in.
This happens with a pin code lock also.
I don't want to have to factory reset, as I'd rather pinpoint the problem in case it is indeed something I've done, so i don't replicate it after a reset and still have the problem.
Anybody have any ideas what i could look at for this? It's not always been this way, but it's so random, i can't pinpoint any changes or programs that i have that would be causing it.
I've searched my heart out, but all my searches come up with other related things and I've not seen any one with this specific issue
Sent from my Nexus 6 using XDA Premium HD
Settings -> Security -> Smart Lock -> enter your pin -> On-body detection -> turn that crap off.
Personally, I use Trusted devices (BT smartwatch,) and can understand Trusted places. But I don't know who'd want to keep their device unlocked when it's being carried around, possibly by a thief.
Tried that also. I tried toggling it on for a while then back off to see if maybe that'd jog some setting, but it hasn't fixed the issue.
I've even disabled smart lock altogether to see if that would work, and it hasn't.
Edit
I've only recently enabled pin lock to make sure i wasn't in fact leg-unlocking my phone through my pants. But enabling pin lock, smart unlock or not, hasn't changed the situation.
Sent from my Nexus 6 using XDA Premium HD app

[Q] unlocking without fingerprint?

Somehow my phone unlocks itself in my pocket without my finger print. I have all those recognized devices setting disabled.
It's done it 3 times or so now. Today it just set up like 6 new home screens, turned on NFC, and it always calls or texts my little sister, never anyone else. The phone was just in my pocket while I was sitting here using the computer, I hadn't touched it physically in an hour.
I have the lock screen setup using fingerprint or passcode. Fingerprint scanner seems to work fine otherwise.
Stock rooted MM, not even debloated.
Any ideas? I'd get rid of it but there really isn't anything out I am interested in currently.
Do you have any trusted devices associated with it? Sounds like that may be the problem, or nfc tags if you have any
Sent from my SM-G935T using Tapatalk
I have my house as a trusted zone, but it is not enabled in the settings. I disabled it due to it not being very trustworthy. I keep BT and NFC turned off all the time as I don't use them.. There shouldn't be any way for this phone to unlock in my pocket, as far as i can tell.
I'm wondering if it's a 6.0 upgrade glitch, I've noticed a few oddities, such as the "safe volume" resetting itself after days of use, randomly. It should only ask you if you're sure after restarting the phone, but sometimes it will just kick in, lower the volume below the threshold, and the warning box will come back up. I listen to my phone ~8 hrs a day at work.

Smart lock not working...?

Does none of the smart lock tools actually work with this phone? The trusted places option worked perfectly on my OPO, but with this phone, I'm always asked to input my pattern or fingerprint when I'm at home. It's not an issue if I'm just turning on the phone because the fingerprint is super fast, but sometimes I like to open a notification right from the lock screen, but I can't do that if the smart lock isn't working...
I am running OOS 4.0.3 and I an confirm that Smart Lock is working.
I have set a trusted device via Bluetooth, in this particular case my Bluetooth module in my car.
Here's what happens and hopefully this is what you expect.
When I am outside of my house and walking to my car, my phone is locked and requires my fingerprint.
I turn on my car and my phone pairs with my car, which then enables the Smart Lock feature.
I then turn on my screen on my phone and I see a Lock Screen but it is slightly different. The lock symbol located at the bottom has a circle around it indicating that the phone only requires a swipe to go to my home screen. It does not require my fingerprint or pin/pattern.
No matter what you do the Lock Screen is present when Smart Lock is functioning. So far I am ok with this.
If you are looking to never see the Lock Screen when Smart Lock is functioning then I am not sure if you can do that.
There could be a way using Tasker for example IF Bluetooth is Connected to Car, set Screen Lock timeout to never and that might prevent the Lock Screen from appearing.
WE would have to test this and I am not sure if Tasker can change the Lock Screen timeout.
I hope this helps.
MysticGolem said:
I am running OOS 4.0.3 and I an confirm that Smart Lock is working.
I have set a trusted device via Bluetooth, in this particular case my Bluetooth module in my car.
Here's what happens and hopefully this is what you expect.
When I am outside of my house and walking to my car, my phone is locked and requires my fingerprint.
I turn on my car and my phone pairs with my car, which then enables the Smart Lock feature.
I then turn on my screen on my phone and I see a Lock Screen but it is slightly different. The lock symbol located at the bottom has a circle around it indicating that the phone only requires a swipe to go to my home screen. It does not require my fingerprint or pin/pattern.
No matter what you do the Lock Screen is present when Smart Lock is functioning. So far I am ok with this.
If you are looking to never see the Lock Screen when Smart Lock is functioning then I am not sure if you can do that.
There could be a way using Tasker for example IF Bluetooth is Connected to Car, set Screen Lock timeout to never and that might prevent the Lock Screen from appearing.
WE would have to test this and I am not sure if Tasker can change the Lock Screen timeout.
I hope this helps.
Click to expand...
Click to collapse
It seems the trusted location is very spotty for me at the moment. Sometimes it works and others it doesn't.
I've got a similar problem. The phone never unlocks when I'm at a trusted location. It unlocks when I'm connected to a trusted Bluetooth though. I've set the location using both my address and by using the Google Maps screen. Nothing works.
I'm using a OnePlus 3T with the regular operating system.
Same here. Trusted location only seems to work for a few hours after adding/resetting a location. After that, it is no longer recognized. I did see an issue brought up in the Pixel forums about this issue, but clearly it's not confined to that device. Here's a few threads about it:
https://productforums.google.com/forum/#!topic/phone-by-google/KNrSoHOhb_Q
http://forums.androidcentral.com/go...art-lock-trusted-places-doesnt-seem-work.html
Hopefully they are still looking into the issue and will release a fix as part of Android O whenever that comes to the 3/3T. Or maybe it's something that OP could look into, but I doubt we'll get that fixed in a timely manner either way...
I have the opposite problem. Phone will always unlock without prompting for fingerprint or code, regardless of being in a trusted location or not. It's pretty annoying.
Sendt fra min ONEPLUS A3003 med Tapatalk
Screen lock doesn't work.
Hi! My problem kinda different. My OP3T screen lock doesn't work. I tried to turn off smart lock. Changing the screen lock type, still doesn't work. Even with fingerprints. So anybody can open my phone by swiping it up. Did somebody have the same problem? Should i upload the video of it and link it?

Categories

Resources