I recently updated my gt-p1000 to cm10, by following a youtube tutorial. After Two days of use , i encountered a bootloop.
i tried factory reset and wiped dalvk cache, cache but it still ddnt work. i then put ICS, (CM9) but still ddnt work.It still keeps restarting.
then i tried to install the latest kernel, but after i did this im stuck on the cyanogenmod logo, it just keeps rotating. I then used odin and down graded to the stock rom, and im suprised that the restarting still ddnt stop. It just keeps restrating every 20-30mins or sumtimes just after u turn it on, (10sec). Pls help Me, i've dont everything told on the internet ( wiped cache, dalvk cache, factory reset, formated sys) EVERYTHING!
Hi,
It sounds a lot like a stuck power button issue to me. Especially if it behaves the same after returning to stock.
But for other opinions and ideas, I will have your thread moved to your device section.
Good luck!
ted my galaxy tab p1000 2.2 froyo with z4mod.
Then initially I installed cwm with ROM manager for galaxy tab T because there wasn't any specific model of cwm for p1000.
But but when I switched off and booted recovery, stock recovery always came......I could access cwm only through the ROM manager ("boot into recovery")....and that too if i choose any function it starts to load and when I press home twice it says "replacing stock with cwm" and that goes on forever...
So I installed cwm with Odin as I couldn't access functions like "install" in cwm without going into the loading phase.....but as the process in Odin finished, my tab started to boot and at "galaxy", the sceen got all pixalated and it went till " samsung " and the whole process looped........ Help!
I actually was trying to install lollipop 5.0.2...
Related
Before I startת I tried to find this problem also search on Google and here but could not find any information about this problem.
This night I did not put the device to a charger because he had already 90% battery, so I left it disconnected,in the morning I got up I saw the phone is turn off, I tried to turn the phone light up and the ATT screen turn on,
I went and when I came back after 10 minutes I saw that the phone is still stuck on the "Galaxy S" screen.
I removed battery, changed, and it's still stuck.
I'm running version CM7.1,
The phone can get into the recovery menu.
Can anyone help me?
I do not understand in the android system and I don't have any backups of my pictuers...
Any chance to save the phone?
update: I search for a solution, and found on the CWM the option of "Mount USB storage" and I copied my pictures to my computer...
so now my new question is how can I get the phone to turn on again? only format and install new rom?
I can use CM7.2 zip file and install via the recovery menu?
you can go to cwmr and can do a data wipe which will uninstall all your apps and data but will not touch your sdcards
You won't lose your pictures on the sd card. If you are still stuck, try wiping dalvik cache from recovery
Sent from my ICS Samsung Captivate
I have a similar problem. Like eidoll32, I did not plug in my cappy and when I went to turn it on the next day, I was only able to get a boot loop at the AT&T screen. Currently, I cannot get into recovery, but only download mode.
I originally rooted the phone with the Galaxy_One_Click_Root tool, and installed CyanogenMod 7.1 for the captivate, when CM7.2 went to RC1, I flashed that from CWM, doing a full wipe. Later I wanted to try ICS, so I flashed AOKP - captivatemtd - M5 b30, doing a full wipe (twice).
That's where I was when this happened, and where I am now.
I've had a search but can't seem to find anything relating to this problem so to cut a long story short it's goes a bit like this;
1. Galaxy Ace GT-S5830 Stuck on boot 'Samsung' logo
2. It's not rooted on standard stock firmware (I think 2.3 ginger bread but not certain)
3. My mum has just given me the phone saying she was on the Facebook app it force closes and crashes
4. She reboots phone and is now in a constant boot loop hitting the O2 splash screen then the 'Samsung' logo which it never leaves only for it to reboot and do the same thing
5. I can put it into Android System Recovery however but have the following message at the bottom of the screen in yellow text which I don't know what it means;
--Appling Muti-CSC--
Can't access to '/syste,/csc/02u/system'.
6. Before I try a wipe data/factory reset is there anything I can do to try and fix it saving all data?
I just don't understand, she's not very good on the old tech so the phone is very basic so there is no need to worry about her messing with the phone rooting etc... so why has this happened its only 5 months - 6months old.
Any help is appreciated.
I think its a CSC error. Try to flash a new ROM via odin.
Maybe a CSC error. Here in Brazil, you need to flash the Vivo or Claro (operators) ROM first, or any other operator roms (like TIM) will not work, will bootloop. Search this.
before you flash a rom try clearing the cache partition in the recovery menu , its worked for me several times
Download stock rom for your region and flash it via odin...
Thank all for the reply I simply tried the reformat through the recovery menu first and it worked! :laugh:
Ok so I have been looking around for two days now and have not been able to find an answer to my problem. I've even searched and tried everything on these forums so please don't ask me to google or use the forums search.
I've got a Bell Canada Samsung Galaxy S GT-I9000M, it was working fine a few days ago and I picked it up to check my messages and it was frozen. After a few minutes I pulled the battery and went to restart the phone.
The phone will now only show the Samsung Galaxy S white logo and simply restart itself and play that logo over and over. If the phone is plugged into the wall it will show the battle charge logo briefly and than restart to the logo. It will go no further than this point.
I have tried to do a factory reset via Home + Power + Vol Up but it seems to reset itself before it will actually load into that menu. Home + Power + Vol Dn will bring me to the download screen which is stable and will not reset the phone.
This is where it gets strange, I have tried Odin and a 100% stock flash on the phone with no luck the phone just sits resetting. After a download of DarkyROM it will actually load the white Galaxy S logo along with the DarkyROM logo and simply go back to resetting.
So the phone is clearly in some state of a working order able to download and accept ROMs but just keeps restarting itself after the white initial Galaxy S logo.
Any and all help would be appreciated! I hope I have explained this problem well enough, maybe it is in need of being brought to a shop to be fixed? Just happens that the warranty expired last week, almost seems coincidental.
Thanks!
After you installed DarkyRom (or any other ROM with CWM), did you try re-entering the recovery menu? Perhaps you will now be able to enter recovery?
tptp said:
After you installed DarkyRom (or any other ROM with CWM), did you try re-entering the recovery menu? Perhaps you will now be able to enter recovery?
Click to expand...
Click to collapse
No, after the install of the ROM it would load up the white galaxy logo along with the DarkyROM logo and than just go back to resetting itself over and over. I could still go back to to the download but not access the reset menu.
Knagar said:
No, after the install of the ROM it would load up the white galaxy logo along with the DarkyROM logo and than just go back to resetting itself over and over. I could still go back to to the download but not access the reset menu.
Click to expand...
Click to collapse
run through My Android Solutions, link below and do the first step after that to immediately to recovery or download mode , than flash a rescue or resurrection kit from My Android collections, link below, all this done without sim card or exts SD card inserted
None of this has worked, I have tried every trick I can find on the net but I can't seem to get it to go.
As before the phone will go into download mode, will accept roms and so on as shown by the DarkyROM logo showing up and going away with the removal of it.
After every attempt I am still not able to get into recovery mode but am still able to access download mode. The phone seems to be in some state of working order but continues to reset itself only when turned on but will run stable in download mode.
ADB doesn't see the device and even if it did I think it would still just reboot once it started into recovery.
It's almost as if the phone starts and after it shows the starting Galaxy S GT I9000 it just turns itself off for some reason
Is their any way to totally reformat the phone and start 100% from scratch without getting into recovery to do factory reset?
Step by step instructions on what to do and download for Odin would be fantastic. I am still not sure 100% on what the PIT/Bootloader/PDA/Phone/CSC are or do so the files I need to put in those and a good explanation would be great!
This happens sometime. To fix, Do this.
1. Boot into download mode.
2. Flash stock ginger bread with Odin using 512 pit.
3. Now boot into recovery and wipe data/factory reset.
4. Boot again into download mode.
5. Flash devil or semaphore kernel.
5a note. Your phone doesn't need to be able to boot. All we need is recovery mode.
6. Boot into the new recovery and wipe data/factory reset.
7. Format /system.
8. Flash ROM / gapps etc.
9. Boot with success.
10. Happy dance time, brings good luck.
Sent from my GT-I9000 using xda premium
Knagar said:
Step by step instructions on what to do and download for Odin would be fantastic. I am still not sure 100% on what the PIT/Bootloader/PDA/Phone/CSC are or do so the files I need to put in those and a good explanation would be great!
Click to expand...
Click to collapse
ok, try flashing a gingerbread Ezboot loader, visit My Android collections, link below, has complete guide at download page
Well I've tried both suggestions with no luck. I am starting to think it's some sort of hardware problem which I can't understand because it is 100% stable and won't reset in download mode. It will accept ROMs and so on but instantly just starts to restart itself after the first logo is shown. No work around will let me into recovery mode and no method I have found so far will just reload how the phone boots. I guess it's time for a new phone eh chaps?
Knagar said:
Well I've tried both suggestions with no luck.
Click to expand...
Click to collapse
hmm, its strange..anyway, you should remove SIM Card and Ext SD card, and try to use any tool from My Android Collection, to format the Internal SD card and flash a 2e recovery to see , if you can get your recovery back or even a i9000 rescue kit would be good to go after formating your Internal SD card
Formatting you Internal SD card, will resolve any settings, data, delvik cache etc that would be the cause of your initial problem.. there are formatting tools as well a recovery tools that can be used to achieve this
Did u flash the correct stock firmware for ur I9000M? try this http://www.hotfile.com/dl/162558059/7efd7bc/I9000UGKG3_I9000BMCKG3_VMC.zip.html.
Source : http://www.sammobile.com/firmware/?page=3&model=GT-I9000M&pcode=0&os=1&type=1#firmware
Ok progress is being made, first I used Odin to load I9000UGKG3-I9000BMCKG3_VMC in the PDA slot without doing a reboot. Then I loaded JPK_Root_Recovery_2e using just the i9000_Kernel and was able to boot recovery.
After doing a Wipe Cache and then Factory reset the phone went back to a boot loop and I was unable to get back to the recovery menu.
After repeating the first steps I am once again in the recovery mode with no boot loot but am unsure as to where to go from here.
Currently the screen reads
Android system recovery <2e>
Samsung Recovery Utils
- for BML -
reboot system now
apply sdcard:update.zip
wipe data/factory reset
wipe cache
-------------------------------------------------
E: Invalid command argument
-- Install from package...
Finding update package...
Opening update package...
# Manual Mode #
--Appling Multi-CSC...
Installing Multi-CSC
multicsc : src /system/csc/BMC/system/ .
*EDIT* Seems once you restart from the recovery mode it goes right back to a boot loop, was not able to apply the SD card update either. So getting to recovery is currently a one time deal without having to go back and reload VMC and 2e. Once restarted all is lost.
You will need to flash another firmware with 3 file method @odin. Search on this forum a firmware and flash it!
Don't worry, u can't brick your phone that easily. I flashed my phone 10times in a day, for boot loops, when i tried to upgrade to 4.0.4
Sent from my GT-I9000 using xda premium
Ok so this time I used Odin to do VMC in the PDA slot, then I9000 Kernel went back to VMC and loaded that then when I restarted the phone it went back to the same boot loop.
I have no way to clear the internal SD or anything like that because the programs will not see my phone connected to my PC.
What could be causing my phone to just continue to restart?
Knagar said:
Ok so this time I used Odin to do VMC in the PDA slot, then I9000 Kernel went back to VMC and loaded that then when I restarted the phone it went back to the same boot loop.
I have no way to clear the internal SD or anything like that because the programs will not see my phone connected to my PC.
What could be causing my phone to just continue to restart?
Click to expand...
Click to collapse
I gave u a source, download the guide on flashing through odin. It should work. Dun flash 1 file by 1 file.
EDIT : u can find more firmwares here. http://forum.xda-developers.com/showthread.php?t=1102881&page=1
Pm me if you need any help!
Ok so here is where I am at..
I have tried everything everyone has listed so far. The only think that has made any sort of progress at the moment is going into download mode, connecting to the USB after loading Odin. Using JPK_Root_Recovery_2e I9000_Kernel.tar will bring me to the recovery screen.
wipe cache partition + reboot = boot loop
wipe cache partition + wipe data/factory reset + restart = boot loop
wipe data/factory reset + restart = boot loop
Any of the above mentioned plus loading stock firmware results in a boot loop.
Any of the above mentioned plus loading DarkyROM Resurrection 10.2 will again show the Galaxy S I9000 Logo plus the DarkyROM logo and proceed to boot loop.
Clear cache and factory reset than load of i9000XXJVT pit/pda/modem/csc results in boot loop.
If I am missing something please explain in detail and not shunt me off to some other page.
As before I have tried everything mentioned with no luck at getting past this boot loop. Clearly the phone is able to accept roms and so on so the internel SD seems to be ok but the boot sequence seems scrambled. Strange that it will boot to download and boot to recovery with JPK but upon restart it just boot loops and without Odin and JPK I can only get back to download mode.
Seems to me you also have some partition woes. Try to find an older rom (Milky's worked for me) that requires re-partitioning to be done. Flash via ODIN, wait for 10-15 mins for whole process to complete. CWM flash any rom from there ... (Darky's Extreme also repartitions)
Ok i got hands on Galaxy S1 (i9000) and wanted pimp it a bit. Rooted it and decided to flash with new rom (MIUI MintBerry Eddition).
I've went to recovery mode, wiped data, calvik cache etc.. and then started installing. Durring instalation i got some error and had to restart phone.
After restart i ended up in not ending bootloop (got samsung logo then glitch kernel v13.1 icon and phone restarts, for brief moment i can see some installer running between those boot animations), it happens every 5-10sec so can't even plug and use odin or sdk...
To make it worse either recovery or download mode don't work... Did i brick this phone? Or there is some rescue for me?
This question has been asked so many times and the replies are always the same everytime. Reflash the Stockfirmware or what ever. Or if u can access the recovery menu u can do a factory reset. In most of the situation u just need to wipe cache and dalvik cache. Around 90% is fixable by just wiping the cache and dalvik.
I already read tons of threads about it but my biggest obstacle is that my phone don't have 3 key thing to do to recovery/download mode. Cant use adb too because phone is on for like 5 sec and then restarts so my laptop cant even detect him on time and cant put reboot recovery command
you may need a USB JIG, you can either buy one or make your own http://forum.xda-developers.com/showthread.php?t=1604707
I'm a complete newbie to android phone modding, and I was really proud of myself when I was able to install the Cyanogen 12.1 and Google Apps onto my Samsung S3 Mini. However, I made the mistake of trying to put my work email on it, which requires that my phone be encrypted. Well, I guess the encryption and rooted phone didn't want to play nice together, so I got the error message that my phone would be factory reset. Boo! Well, it got worse. Instead of a factory reset, my rooted phone now is stuck in what I have now learned is called a bootloop. Basically I turn my phone on, and the Cyanogen start screen (with the text "TEAMWIN") just infinitely flashes on the screen until I pull the battery.
I have tried using Odin 3.07 and cm12.1_golden.nova.20160210.ODIN_TWRP.tar.md5. I do the three button system boot, connect the usb, run Odin, get the phone recognized, and then install the .md5 in the PDA section of Odin. It tells me that it succeeded, but when I restart my phone it's still the same bootloop. I also tried swearing, but that didn't help either.
Has anyone else out there had experience with Cyanogen and this particular error? I would love to get this phone working again... preferably with either a Lollipop version of android or back to Cyanogen 12.1.
Any info would be greatly appreciated! Thanks everyone.
So I've got an update if anyone's interested... I can't call it progress, but it's a different problem now.
I was able to download and use Odin to do what was shown on this link: http://forum.xda-developers.com/showthread.php?t=2122548&highlight=root
Everything worked in Odin, the phone rebooted, and went to the Team Win Recovery Project diagnostics screen, rebooted again, and then to the samsung logo. However, it immediately goes to the "Encryption Failed" error screen, and the only option is to 'reset device'. Of course, doing this just reboots the phone and it then has the Team Win loading screen, Team Win Recovery Project diags screen, Samsung logo, and back to the 'Encryption Failed' screen again. So now I have a new infinite loop to solve. *sigh*
any thoughts?
Have you been able to get into TWRP? If you are, maybe you could wipe everything from there and flash the recovery version of your ROM.
I was able to put the stock bootloader onto the phone using Odin, download the original tar from here: http://live.samsung-updates.com/index.php?device=GT-I8190, then used the stock bootloader to install it from the sd card. Everything went fine, but now when I boot the phone it just hangs on the Samsung Galaxy S3 mini GT-i18190 start screen indefinitely. Is this progress, or have I created a new problem now?
You're playing around with heavy stuff. I won't recommend using an upgrade flash (CM over Odin) as an full flash. Please try flashing a stock image.
If you did something wrong to the partitioning, then it's likely to not allow you to do a successfull factory reset. Maybe you can try re-flashing a stock Odin image with PIT repartitioning.
Remember to try to backup the EFS folder, doing that kind of flash might wipe it.