So I'm trying to get my VZN Galaxy Tab back on its feet. After trying to get Gingerbread in it so I can use Netflix - and failing - I'm going through a lot of motions.
Okay. First I rooted it with Super One Click. I should have been happy with that, but noooo. Then I tried flashing GB on it (I wish I can remember which ROM I started with...it's a mess. I think the pit file was gt-p1000_mr? Does that sound right?).
When that didn't work, I went to the much-cross-posted procedure for returning it to stock using Heimdall and SCH-i800_VZW_stock. Tried it five times. Each time, it booted into the Galaxy Tab/Samsung logos, then a fast glimpse of scrambled letters for a second followed by twinkly music, then black nothingness. It would then bootloop. I attempted to boot into recovery to wipe data/cache, but I couldn't get there. Vol-Up/Pwr just brought up the logo and scrambled video again.
Since I was still able to get into download mode, I tried flashing another ROM...this one the "P1000XXJQ1_P1000XXJQ1_P1000XXJPZ" method. With this, I was able to also flash CWM so I have SOME recovery mode. Sadly, booting brings up the GT/SAMSUNG logos and I get the spacey animation, but after that, again - blackness. This time, however, the Menu/Home/Back/Search buttons light up, so something's happening in there.
Also, booting into CWM, I cannot get my sdcard to be recognized. I tried different cards, so there's something goofy with the slot itself, I'm guessing.
So nothing is really working, but since I can get into CWM and also download modes, I'm holding out hope that this is not completely bricked.
I just need to find the right method of getting it back to a functioning tablet. If anyone has any suggestions, I'm all eyes. Thanks so much.
UPDATE: I tried reflashing stock using the tried and true method. But this time, I went in and flashed CWM replacing the stock recovery which never worked for me. I got the Galaxy Tab/Samsung logo, and at long last, the animated VZW logo. Then it would bootloop there. I booted into CWM recovery and wiped the data/system and the cache from the first page. It still booted and bootlooped the same. This time, I booted into recovery, went to the mounts and storage section and formatted the system, data and cache. Opening logo only. CWM again, and got a whole bunch of "cache missing" messages. But I think I'm getting closer. Back to work.
UPDATE II: So the farthest I can get is the animated VZW logo using the combo of the stock flash through Heimdall, then flashing CWM with Odin. Still no sdcard access. Anything I should try here? Thanks.
same question here
Did anyone figure out how to restore Verizon tab?
So, to make a long story, short, for the past couple of days my phone has been soft-bricked... It first happened when I attempted to flash dmodv6 in CWM. Everything looked good throughout the installation, however, when I rebooted my device, I got stuck in a boot loop where It would say "Samsung Galaxy S III GT-I8190" for a few seconds, the screen would go black, then say the same thing again... over and over and over...
After a lot of trial and error because of NOT making a nandroid backup via CWM (stupid, I know - I had made one via Titanium Backup and thought that might be good enough), I finally was able to boot. Thanks to xXPR0T0TYPEXx, I was able to flash another rom by puting my external sd card into another phone, loading another rom onto it, and putting it back in my phone. I now had Cyanogenmod10 and was able to boot back up.
I attempted to restore the Titanium Backup I had made with this new rom (stupid again, I know) and it made almost every service on the phone stop working... I desperately wanted just to get back to square one - to install stock firmware and go from there. I followed tys0n's guide on flashing stock recovery then attempted to install stock firmware... All seemingly went well - I booted up, got past the initial "Samsung Galaxy S III GT-I8190" logo and finally got hung up at the "Samsung" logo. I left it one while I went to sleep, just to see if it would eventually work... I woke up and it was still the same. I tried flashing different version of the same stock firmware but it all ended in getting hung up at the "Samsung" logo.
A major problem is that I absolutely CANNOT flash a custom recovery via Odin - it just will NOT work. Everything looks good on Odin's end - I PASS, get the (succeed 1 / failed 0) thing but am sent to stock recovery every time I do the 3 button combination. I've tried many version of CWM and TWRP.... NOTHING. I've even unticked the "Auto-Reboot" button in Odin and pulled the usb cable and battery upon completion but, but nothing ever works. The only way I was ever able to get CWM on my phone in the first place was by an in-phone app... Rom Manager, maybe? I can't remember. But, as it is, that method is out of the question.
I've learned a lot about what I did wrong so that's the only good part of all of this. Now, all that's left is to fix the thing so I can go about it right. I'm completely out of ideas, have spent almost a full 24 hours searching solutions to this problem and I am at wits end...
I just want to get back to stock firmware... Any ideas, guys? Should I go about re-partitioning my device at this time?
I have the PIT file... but I'm not sure as to which firmware to choose. I imagine a firmware that is 4.1.1 like my phone was... but I'm not sure about the region. I live in the US and there is no US or North American region firmware version.Can anyone shed some light on which one I should choose?
My SSN underneath my battery say "GTI8190GSMH".
I'm sorry this is so long, I just wanted to explain what happened as best as I could. So, should I go about re-partitioning my device at this point? If so, what firmware would you recommend for my model? Are different region versions okay for a this method?
Or is there another way?
Thanks, guys. :silly:
Some additional details (if it will help): I can, indeed, boot into both recovery and download mode. I just can't seem to flash a stock rom that will boot past the "Samsung" logo.
I've even attempted to flash the param file after the rom flash but it didn't help.
AffectiveEffect said:
Some additional details (if it will help): I can, indeed, boot into both recovery and download mode. I just can't seem to flash a stock rom that will boot past the "Samsung" logo.
I've even attempted to flash the param file after the rom flash but it didn't help.
Click to expand...
Click to collapse
Do you have the stock recovery now instead CWM? If yes do (if you didn't try it) a factory/data reset and wipe cache but it will delete your pics, music etc on your internal storage too.
xXPR0T0TYPEXx said:
Do you have the stock recovery now instead CWM? If yes do (if you didn't try it) a factory/data reset and wipe cache but it will delete your pics, music etc on your internal storage too.
Click to expand...
Click to collapse
Yeah, I have stock recovery now and I have tried that many, many times... Even if I install something like CyanogenMod, it still gets hung up on the CyanogenMod boot screen... And if I boot a stock firmware, it gets hung up at the same place at the "Samsung" logo...
I have an idea that one of the only options left is a PIT re-partitioning... If so, how would I properly go about that? Load the PIT file and the stock firmware in odin? Or only the PIT as PDA? I've heard a couple of different things and am unsure.
AffectiveEffect said:
Yeah, I have stock recovery now and I have tried that many, many times... Even if I install something like CyanogenMod, it still gets hung up on the CyanogenMod boot screen... And if I boot a stock firmware, it gets hung up at the same place at the "Samsung" logo...
I have an idea that one of the only options left is a PIT re-partitioning... If so, how would I properly go about that? Load the PIT file and the stock firmware in odin? Or only the PIT as PDA? I've heard a couple of different things and am unsure.
Click to expand...
Click to collapse
I don't know about PIT files but some people got this message : "CUSTOM PIT BINARY" in recovery mode after flashed a PIT file (maybe they used a other PIT file that wasn't compatible). So make sure you use a PIT file that is GT-i8190 compatible.
I tried flashing the PIT file for the hell of it because I am completely out of ideas.... It failed repeatedly in Odin.
I have no clue on how to fix this... I've tried countless roms and they all get stuck on their respective boot screens. The only one that gave me a glimmer of hope was Cyanogenmod10.2.... It went as far as saying "Android is upgrading" and showed "starting apps" but it got hung up there.
I don't know what to do, guys. Someone help!!!
AffectiveEffect said:
I tried flashing the PIT file for the hell of it because I am completely out of ideas.... It failed repeatedly in Odin.
I have no clue on how to fix this... I've tried countless roms and they all get stuck on their respective boot screens. The only one that gave me a glimmer of hope was Cyanogenmod10.2.... It went as far as saying "Android is upgrading" and showed "starting apps" but it got hung up there.
I don't know what to do, guys. Someone help!!!
Click to expand...
Click to collapse
Use a custom ROM to see if it will fix the problem .Try to flash CyanogenMod 10.2 by NovaFusion via odin or if you flash CyanogenMod 11 then you will automatically get the TWRP recovery. NovaFusion Team Homepage : novafusion.pl. I know you want the stock ROM but try other ROMs to get a booting phone again
xXPR0T0TYPEXx said:
Use a custom ROM to see if it will fix the problem .Try to flash CyanogenMod 10.2 by NovaFusion via odin or if you flash CyanogenMod 11 then you will automatically get the TWRP recovery. NovaFusion Team Homepage : novafusion.pl. I know you want the stock ROM but try other ROMs to get a booting phone again
Click to expand...
Click to collapse
I have... I've tried numerous stock roms and numerous custom roms... all versions of Cyanogenmod, Chameleon, Carbon, Slim mod, etc... They all get stuck at their respective logos.
I even tried the Cyanogenmod with TWRP but, as I explained earlier, I absolutely CAN NOT flash a custom recovery unless I use what ever app I used.... It doesn't work with Odin or with a rom. I don't know why.
I wish someone had more info on repartitioning my phone and if it would help.
NEED HELP?
AffectiveEffect said:
So, to make a long story, short, for the past couple of days my phone has been soft-bricked... It first happened when I attempted to flash dmodv6 in CWM. Everything looked good throughout the installation, however, when I rebooted my device, I got stuck in a boot loop where It would say "Samsung Galaxy S III GT-I8190" for a few seconds, the screen would go black, then say the same thing again... over and over and over...
After a lot of trial and error because of NOT making a nandroid backup via CWM (stupid, I know - I had made one via Titanium Backup and thought that might be good enough), I finally was able to boot. Thanks to xXPR0T0TYPEXx, I was able to flash another rom by puting my external sd card into another phone, loading another rom onto it, and putting it back in my phone. I now had Cyanogenmod10 and was able to boot back up.
I attempted to restore the Titanium Backup I had made with this new rom (stupid again, I know) and it made almost every service on the phone stop working... I desperately wanted just to get back to square one - to install stock firmware and go from there. I followed tys0n's guide on flashing stock recovery then attempted to install stock firmware... All seemingly went well - I booted up, got past the initial "Samsung Galaxy S III GT-I8190" logo and finally got hung up at the "Samsung" logo. I left it one while I went to sleep, just to see if it would eventually work... I woke up and it was still the same. I tried flashing different version of the same stock firmware but it all ended in getting hung up at the "Samsung" logo.
A major problem is that I absolutely CANNOT flash a custom recovery via Odin - it just will NOT work. Everything looks good on Odin's end - I PASS, get the (succeed 1 / failed 0) thing but am sent to stock recovery every time I do the 3 button combination. I've tried many version of CWM and TWRP.... NOTHING. I've even unticked the "Auto-Reboot" button in Odin and pulled the usb cable and battery upon completion but, but nothing ever works. The only way I was ever able to get CWM on my phone in the first place was by an in-phone app... Rom Manager, maybe? I can't remember. But, as it is, that method is out of the question.
I've learned a lot about what I did wrong so that's the only good part of all of this. Now, all that's left is to fix the thing so I can go about it right. I'm completely out of ideas, have spent almost a full 24 hours searching solutions to this problem and I am at wits end...
I just want to get back to stock firmware... Any ideas, guys? Should I go about re-partitioning my device at this time?
I have the PIT file... but I'm not sure as to which firmware to choose. I imagine a firmware that is 4.1.1 like my phone was... but I'm not sure about the region. I live in the US and there is no US or North American region firmware version.Can anyone shed some light on which one I should choose?
My SSN underneath my battery say "GTI8190GSMH".
I'm sorry this is so long, I just wanted to explain what happened as best as I could. So, should I go about re-partitioning my device at this point? If so, what firmware would you recommend for my model? Are different region versions okay for a this method?
Or is there another way?
Thanks, guys. :silly:
Click to expand...
Click to collapse
i got same problem with you before im wayback dmod v6 before and stuck at samsung logo i just try hard reset
1. open your phone
2. remove battery and put the battery try and try til u get in recovery mode (CWM) maybe just tried almost 20x restarting in logo til u in CWM :victory:
3. re-Flash your dmod v6 this way for dirty rom like what i said (softbricks)
4. just flash another new rom whatever u like or dmod v6.
5. I HOPE IT HELPS DONT FORGET TO THANKS <3 :highfive:
hello everyone, this thread might seem like a repost to some of you, but since the answer has yet to be found on the other thread, might as well try asking about it myself
so i've got a galaxy s3 mini (the i8190 version, not the l or the n) it's in stock 4.1.2 international version. yesterday, out of nowhere the phone just keeps on rebooting after a few minutes of booting up ( it got to the lockscreen and home screen just fine, but it keeps rebooting after that). and i think, well might as well just flash something on top of this stock rom so i decided to get the cm11 from novafusion, along with odin and tried to flash it. it all goes well in odin, no problem at all (odin flashes green passed sign).
but the strange thing is, when the phone rebooted, it goes back to the stock rom, with all the apps intact and with stock recovery. so far, i've been trying to flash almost everything into this phone via odin and odin always says it succeeded but nevertheless, everything stays the same, i've tried flashing some custom roms, custom recoveries but it doesn't seem to work. and the flash counter never goes up, it still says "custom binary download : no"
i've also tried to go to stock recovery and tried to wipe data / factory reset the phone which it said it has done successfully but when i booted in, nothing changed. i'm still logged on as my account with all the apps and files intact.
this problem has also been asked here but no definitive answer seems to have surfaced there.
please, any help would be appreciated
So I decided to flash a rom. I haven't done so on this galaxy s6 edge. I've always done it on my previous galaxy phones. The phone already had all the pre-reqs for EXTREME SYNDICATE. Once the phone rebooted to download, I used odin to push out the new OE2 FLASH ME. After that was done the phone just went into a boot loop. I double checked and made sure all the files were correct.
Now I am at a point where even using odin with stock image just goes to samsung splash screen and song then just gives me a Startup Failed - Please connect verizon repair etc.
Is there anything I can do on my end or am I screwed with this phone now. I can still go to download mode and the recovery mode that lets me wipe, reboot etc. But nothing seems to work. Unless I am missing something here.
All help is appreciated, thanks!
Mods can close this thread. I tried everything. Eventually flashing different OE2 and OF1 finally got it working even though I flashed the stock ....
Hey guys
Samsung Galaxy Mini 5570 is a pretty old device now and definitely not worth to talk about, but It's for my aunt and she said i HAVE to fix it otherwise she will kick my butt.
This is the whole story:
Phone was running a very low android version (it was 2.1 or something) that i could barely install apps on it (Just installed WhatsApp), I decided to upgrade it to a higher version so i could install other applications like Line and Telegram for her, so basically i had to flash CWM file first because it was required, I flashed it using this link:
http://www.droidthunder.com/root-install-clockworkmod-cwm-recovery-samsung-galaxy-minipop-gt-s5570/
They said flash the cwm file and factory reset your phone but i flashed the cwm file and rebooted my phone without factory reset, everything was working fine :good: but i decided to follow the instruction so i rebooted into the recovery mode and factory reseted my phone (by my phone i mean her phone, but i'm gonna say my phone instead) and guess what, it never booted up again. stuck on Samsung logo.
But i could go into the download and recovery mode, so basically i followed this instruction:
http://www.droidthunder.com/update-samsung-galaxy-minipop-gt-s5570-android-4-2-1-cyanogenmod-10-1/
which is from the same guy, I flashed it using recovery mode and flashed gapps too, everything went normal without any errors. So i rebooted my phone and ............
a black screen poped up, I was really worried because i couldn't boot my phone, nor could i go into the recovery or download mode. I don't know if i could or not but the only thing I'm getting right now is a black screen or a backlight.
The only thing that seems to be working is when i hold Power+Volume UP button, my laptop can detect my phone (as Samsung CDMA Technologies) but can not flash anything using Odin, it stucks on "setup connection" message. Nothing else is working, I tried:
Home+power+volume down
Home+power+volume down+volume up
Power+volume down
Power+home
etc
I also tried a hundred different ways like completely uninstalling the drivers (with or without kies) pulling battery out, try those key combination while battery is out and reinsert battery while holding them but nothing is working.
I found this article yesterday which is for unbricking the hard bricked phones, but ADB can not detect my phone:
http://www.engineerthink.com/blog/2015/11/how-to-unbrick-hard-bricked-android-phone/
Please help me guys, And do not suggest me to take it in Customer Service because i would if i could.
Thanks in advance