Database Develop

[Q] Interesting boot loop problem.

2 nights ago I thought I would have a go at installing ULTIMATE ROM 3.0. I have flashed many Roms on my Galaxy S before and not had a problem yet. I have ClockworkMod Recovery 2.5.1.0 installed.
However, this time- something went wrong. I don't think the installation completed properly. When I tried to reboot the system (to go back into my previous ROM) I wasn't able to. The Samsung logo appeared before the phone booted back into Recovery mode.
I tried to re-flash my previous working update.zip but had problems. I wasn't able to properly re-flash as the Installation would abort for various reasons. After doing cache clearing and data/factory reset I still had no luck. I resorted to reformatting the sdcard. Still didn't solve the flashing problem.
Throughout the whole time I was able to adb into the phone, browse the file system and I could push files on to it and take files off. But Kies wouldn't recognise the phone and Odin isn't able to complete a transfer to the phone (not sure why).
Today, I am able to successfully flash update.zip files (at least, that's what it looks like) but the phone ALWAYS boots into ClockwordMod recovery.
I am fast running out of ideas. Does anyone have any suggestion?
How can I tell if my ROMs are really 'there' but I can't access them because ClockworkMod is preventing them from booting?

hmmm... me too.. stuck in a loop, that keeps going back to the CWM recovery menu, and no matter what i do, keeps going back to it... cant even get to the download screen to flash (again).... here i was thinking no matter what happens when installing custom roms, i can always flash to my stable secure rom, but not this time... need some software that can perform surgical operations, any suggestions?

bradels said:
2 nights ago I thought I would have a go at installing ULTIMATE ROM 3.0. I have flashed many Roms on my Galaxy S before and not had a problem yet. I have ClockworkMod Recovery 2.5.1.0 installed.
However, this time- something went wrong. I don't think the installation completed properly. When I tried to reboot the system (to go back into my previous ROM) I wasn't able to. The Samsung logo appeared before the phone booted back into Recovery mode.
I tried to re-flash my previous working update.zip but had problems. I wasn't able to properly re-flash as the Installation would abort for various reasons. After doing cache clearing and data/factory reset I still had no luck. I resorted to reformatting the sdcard. Still didn't solve the flashing problem.
Throughout the whole time I was able to adb into the phone, browse the file system and I could push files on to it and take files off. But Kies wouldn't recognise the phone and Odin isn't able to complete a transfer to the phone (not sure why).
Today, I am able to successfully flash update.zip files (at least, that's what it looks like) but the phone ALWAYS boots into ClockwordMod recovery.
I am fast running out of ideas. Does anyone have any suggestion?
How can I tell if my ROMs are really 'there' but I can't access them because ClockworkMod is preventing them from booting?
Click to expand...
Click to collapse
myrobelle said:
hmmm... me too.. stuck in a loop, that keeps going back to the CWM recovery menu, and no matter what i do, keeps going back to it... cant even get to the download screen to flash (again).... here i was thinking no matter what happens when installing custom roms, i can always flash to my stable secure rom, but not this time... need some software that can perform surgical operations, any suggestions?
Click to expand...
Click to collapse
Thats too bad guys,and i m sorry to hear that news.I would like to havean answer but i dont...
The fact is that since most people in this forum use some custom roms,and all of us think the same,that we can always go back,so it would be great if you give some more details about what happened to you,and mybe why it went wrong,and it would be even better if one of the BIG guys would give some explanation about this...
I already thinking of not updating my rom anymore,dot want to end up in looping too,so lets see if someone will find something.Good luck guys..
By the way,i didnt get it right,CWM recovery cannot load your backup????

I just got an idea,but not sure if or how it would work or not.
Since you can push file with ADB,if soeone made a clean backup with his CWM (o e mail,contacts,setting saved) and send it to you,so that you log in with CWM recovery and flash that ???
Just an idea..maybe stupid dont know...

Its not very clear if youve tried this already but cant you just boot into recovery through adb? or does that not work either?

Cannot Access CWM Recovery Mod

[SOLVED -- Read my last post]
Posting on forum was my last resource, but I've tried literately almost everything I can possible find.
I already bricked my phone and had to unbrick, do everything (update firmware etc) all over again.
I am at a point where I am afraid to do something new to my phone now without knowing what they are...
Please bare with me, I am not familiar with exactly what flashing is or whatnot, I just followed the instructions and got where I am....
K, recently I decided to wipe my phone CLEAN and update to new CyanogenMod 9 from factory mode.
So, I have Captivate, I897. It was ECLARE with 2.1 firmware.
I have updated to 2.3.5 (Gingerbread [I897UCKJ2]), Rooted.
I had to Flash BACK to KK4_stock_kernel.tar for me to use WIFI again because I had issue after Rooting my phone, I couldnt access the WIFI.
I installed Clockwork mod (Free version).
My goal is to install CyanogenMod 9, and part of the process requires me to enter the CMW Recovery Mod.
I dont even know what this looks like, but all I know is whenever I boot my phone, after the AT&T logo animation it seems to go into this "messed up" screen, where as if my phone is broken. Stays there for 3 seconds and then continues to boot back to its OS.
In ROM manager, it says Flash ClockworkMod Recovery (You must have the clockworkmod recovery installed to flash and restore ROMs!)
Another option within ROM manager is, Reboot into Recovery (Boot into Recovery mode for manual management.), which if I do access it, it takes me back to that AT&T logo animation and that "messed up" screen again, but this time it stays there. Where all kinds of colored pixels are on my screen as if my screen is broken. It will only continue to boot back to my OS if I press power button or some sort.
Im guessing that's my Recovery Mod, which my phone for some reason cannot see?
So I tried "Download ROM (Upgrade to ROM Manager (premium) to access the full list of ROMs!", hoping this may cure that messed up screen effect, which I think is the Recovery Mod for all I know... When I click to install, it gives me Confirm Phone Models. None are my phone model for me to install.. (It only gives me Google Nexus S / Google Nexus S 4G / Samsung Epic4G / Samsung GalaxyS i9000).
Earlier, I was looking at this, http://forum.xda-developers.com/showthread.php?t=1127578
which is a way to fix recovery mod(?) But I have NO idea how to even install those files... Maybe not the .tar file but the other one.
Please help? Am I the only one experiencing this kind of problem? Couldnt find anywhere else on youtube / google / forum..
Thank you VERY much in advance, really appreciate it..
-Dan.

danroh said:
I had to Flash BACK to KK4_stock_kernel.tar for me to use WIFI again because I had issue after Rooting my phone, I couldnt access the WIFI.
-Dan.
Click to expand...
Click to collapse
This is your likely problem right here. The Kernel that is installed during the rooting process and typically when you install custom roms is what is responsible for installing and therefor you being able to access the CWM recovery. Flashing back to the stock kernel likely messed things up for you.
http://forum.xda-developers.com/showthread.php?t=1300843
Now if you follow that link it will take you to several one click options for flashing your phone to stock gingerbread but with a kernel containing CWM. Also keep in mind that it is possible you could have wifi issues if you've had them in the past, but if your goal is to get to CM9 just ignore the wifi for the time it shouldn't be an isuse in the end.

Hey OP,
See this.... TRusselo's Flashing Guide
Sent from my SAMSUNG-SGH-I897 using xda premium

You need Gingerbread bootloaders.

Thanks guys! I figured out the problem and solved it!
Like you guys said, I didnt have the bootloader. The gingerbread I installed was the no bootloader version. After reinstalling to the one with bootloader, I was able to access the recovery mod and that "rainbow screen" glitch was no more.
Thank you!

[Q] Help! bricked + corrupt system?

I've been looking all over this site but I can't find anything. I suppose that it's partly because I'm not sure about the problem myself.
A couple of months back (maybe more) I upgraded to the ICS infinitum rom (blue version) with midnight kernel. It was great - the phone worked fine. Well I'm exaggerating, it ****ed up every once in a while. Programs would automatically shut down and it would get really slow after a while. But all in all it wasn't bad, and it was stable enough for me most of the time....
Then, last Thursday everything seemed to go apart, every program on the phone was shutting down. So I thought I'll just restart and it will be fine. When I did, the phone did not come back on. the kernel would load and then it was stuck on the start-up animation in infinite loops.
Now, to be frank, this isn't the first time this has happened. So I didn't panic. Last time I just used the CMW recovery to re-install the kernel and the rom (I keep the files on the sd card). But this time, I wanted to try to avoid the factory wipe for as long as I could, and try finding a different option, knowing that if all else fails, I have something to revert back to.
Then I did the mistake of deleting the init.d file without re-installing anything. I wanted to, but accidentally clicked on the 'reboot now' option. And then all went to ****. The kernel didn't load. I went to recovery and it couldn't mount the sd card so I couldn't re-install it.
I tried flashing a new kernel using odin, and it did get me a bit better: my CWM recovery can read the sd. However, I still can't mount the system. Even worse, when I get to the infinitum zip roms and re-installing it brings up the status 7 error (which, after searching, seems to come up for different reasons for each person)
Despite installing a new kernel, when I reboot the phone now it doesn't load the kernel anymore, it just stays stuck on the welcome screen. I tried using the recovery to re-install a different kernel, it worked, but the phone still won't start - it now automatically skips to the recovery mode. I don't know if I should try flashing a rom through odin, and I'm too afraid to try anything at all now...
Can anyone help me? Is there any way to restore the init.d file or maybe that has nothing to do with my problem?

uvii said:
I've been looking all over this site but I can't find anything. I suppose that it's partly because I'm not sure about the problem myself.
A couple of months back (maybe more) I upgraded to the ICS infinitum rom (blue version) with midnight kernel. It was great - the phone worked fine. Well I'm exaggerating, it ****ed up every once in a while. Programs would automatically shut down and it would get really slow after a while. But all in all it wasn't bad, and it was stable enough for me most of the time....
Then, last Thursday everything seemed to go apart, every program on the phone was shutting down. So I thought I'll just restart and it will be fine. When I did, the phone did not come back on. the kernel would load and then it was stuck on the start-up animation in infinite loops.
Now, to be frank, this isn't the first time this has happened. So I didn't panic. Last time I just used the CMW recovery to re-install the kernel and the rom (I keep the files on the sd card). But this time, I wanted to try to avoid the factory wipe for as long as I could, and try finding a different option, knowing that if all else fails, I have something to revert back to.
Then I did the mistake of deleting the init.d file without re-installing anything. I wanted to, but accidentally clicked on the 'reboot now' option. And then all went to ****. The kernel didn't load. I went to recovery and it couldn't mount the sd card so I couldn't re-install it.
I tried flashing a new kernel using odin, and it did get me a bit better: my CWM recovery can read the sd. However, I still can't mount the system. Even worse, when I get to the infinitum zip roms and re-installing it brings up the status 7 error (which, after searching, seems to come up for different reasons for each person)
Despite installing a new kernel, when I reboot the phone now it doesn't load the kernel anymore, it just stays stuck on the welcome screen. I tried using the recovery to re-install a different kernel, it worked, but the phone still won't start - it now automatically skips to the recovery mode. I don't know if I should try flashing a rom through odin, and I'm too afraid to try anything at all now...
Can anyone help me? Is there any way to restore the init.d file or maybe that has nothing to do with my problem?
Click to expand...
Click to collapse
I suggest flash 3-file GB rom via odin with ticked re-partirion and phone bootloaderupdate.

First of all init.d has nothing to do with the boot of kernel and ROM itself. It's just like autostart in Windows, so if it's missing it shouldn't cause problems.
My solution is to flash a complete stock Gingerbread ROM using Odin. You can get them at sammobile.com. Then afterwards flash a custom kernel and then whatever you like.
If you need help,feel free to ask me
Sent from my Gameboy Color

Yes! Thank you! That worked!!

It happened again! just 10 days later.
Is the Infinidtum rom ****ed up in any way?
it's stuck on the loading part of the rom

[Q] can't modify anything on device

hello everyone, this thread might seem like a repost to some of you, but since the answer has yet to be found on the other thread, might as well try asking about it myself
so i've got a galaxy s3 mini (the i8190 version, not the l or the n) it's in stock 4.1.2 international version. yesterday, out of nowhere the phone just keeps on rebooting after a few minutes of booting up ( it got to the lockscreen and home screen just fine, but it keeps rebooting after that). and i think, well might as well just flash something on top of this stock rom so i decided to get the cm11 from novafusion, along with odin and tried to flash it. it all goes well in odin, no problem at all (odin flashes green passed sign).
but the strange thing is, when the phone rebooted, it goes back to the stock rom, with all the apps intact and with stock recovery. so far, i've been trying to flash almost everything into this phone via odin and odin always says it succeeded but nevertheless, everything stays the same, i've tried flashing some custom roms, custom recoveries but it doesn't seem to work. and the flash counter never goes up, it still says "custom binary download : no"
i've also tried to go to stock recovery and tried to wipe data / factory reset the phone which it said it has done successfully but when i booted in, nothing changed. i'm still logged on as my account with all the apps and files intact.
this problem has also been asked here but no definitive answer seems to have surfaced there.
please, any help would be appreciated

Infinite bootloop on Cyanogen modded S3 Mini... help!

I'm a complete newbie to android phone modding, and I was really proud of myself when I was able to install the Cyanogen 12.1 and Google Apps onto my Samsung S3 Mini. However, I made the mistake of trying to put my work email on it, which requires that my phone be encrypted. Well, I guess the encryption and rooted phone didn't want to play nice together, so I got the error message that my phone would be factory reset. Boo! Well, it got worse. Instead of a factory reset, my rooted phone now is stuck in what I have now learned is called a bootloop. Basically I turn my phone on, and the Cyanogen start screen (with the text "TEAMWIN") just infinitely flashes on the screen until I pull the battery.
I have tried using Odin 3.07 and cm12.1_golden.nova.20160210.ODIN_TWRP.tar.md5. I do the three button system boot, connect the usb, run Odin, get the phone recognized, and then install the .md5 in the PDA section of Odin. It tells me that it succeeded, but when I restart my phone it's still the same bootloop. I also tried swearing, but that didn't help either.
Has anyone else out there had experience with Cyanogen and this particular error? I would love to get this phone working again... preferably with either a Lollipop version of android or back to Cyanogen 12.1.
Any info would be greatly appreciated! Thanks everyone.

So I've got an update if anyone's interested... I can't call it progress, but it's a different problem now.
I was able to download and use Odin to do what was shown on this link: http://forum.xda-developers.com/showthread.php?t=2122548&highlight=root
Everything worked in Odin, the phone rebooted, and went to the Team Win Recovery Project diagnostics screen, rebooted again, and then to the samsung logo. However, it immediately goes to the "Encryption Failed" error screen, and the only option is to 'reset device'. Of course, doing this just reboots the phone and it then has the Team Win loading screen, Team Win Recovery Project diags screen, Samsung logo, and back to the 'Encryption Failed' screen again. So now I have a new infinite loop to solve. *sigh*
any thoughts?

Have you been able to get into TWRP? If you are, maybe you could wipe everything from there and flash the recovery version of your ROM.

I was able to put the stock bootloader onto the phone using Odin, download the original tar from here: http://live.samsung-updates.com/index.php?device=GT-I8190, then used the stock bootloader to install it from the sd card. Everything went fine, but now when I boot the phone it just hangs on the Samsung Galaxy S3 mini GT-i18190 start screen indefinitely. Is this progress, or have I created a new problem now?

You're playing around with heavy stuff. I won't recommend using an upgrade flash (CM over Odin) as an full flash. Please try flashing a stock image.
If you did something wrong to the partitioning, then it's likely to not allow you to do a successfull factory reset. Maybe you can try re-flashing a stock Odin image with PIT repartitioning.
Remember to try to backup the EFS folder, doing that kind of flash might wipe it.