hello everyone, this thread might seem like a repost to some of you, but since the answer has yet to be found on the other thread, might as well try asking about it myself
so i've got a galaxy s3 mini (the i8190 version, not the l or the n) it's in stock 4.1.2 international version. yesterday, out of nowhere the phone just keeps on rebooting after a few minutes of booting up ( it got to the lockscreen and home screen just fine, but it keeps rebooting after that). and i think, well might as well just flash something on top of this stock rom so i decided to get the cm11 from novafusion, along with odin and tried to flash it. it all goes well in odin, no problem at all (odin flashes green passed sign).
but the strange thing is, when the phone rebooted, it goes back to the stock rom, with all the apps intact and with stock recovery. so far, i've been trying to flash almost everything into this phone via odin and odin always says it succeeded but nevertheless, everything stays the same, i've tried flashing some custom roms, custom recoveries but it doesn't seem to work. and the flash counter never goes up, it still says "custom binary download : no"
i've also tried to go to stock recovery and tried to wipe data / factory reset the phone which it said it has done successfully but when i booted in, nothing changed. i'm still logged on as my account with all the apps and files intact.
this problem has also been asked here but no definitive answer seems to have surfaced there.
please, any help would be appreciated
Related
To start, I was using I9000XXJP2 firmware on an unlocked samsung I9000 from Bell. I installed a lagfix a few days ago and everything was working fine. The phone was really slow and freezing a lot today so I decided to restart. Ever since then, the phone is stuck on the Samsung S screen (not the one with the triangle). I can get into download mode just fine and i tried reflashing XXJP2 using odin back onto the phone. Odin does everything fine up until i see a blue 'reset' on odin and the phone is in recover mode with the options asking for me to restart the system etc. I restored to factory settings from there and even cleared the cache and restarted but it is still stuck on that "S" screen at startup. Odin only says "pass" once the phone is disconnected. So as of yet I haven't been able to flash a working ROM back on the phone. If you have any ideas as to which ROM i should try, if you could place a link with that, I would be very grateful.
I've had this problem myself a couple of times (just happened today in fact).
Boot into recovery mode (vol-up, home & power). Do you see any error messages in yellow under the menu?
I was unsuccessful at reflashing any of the Froyo firmwares so I reverted back to the last official 2.1 firmware from Bell JH2. Since I was coming from a 512 pit firmware, I didn't repartition or specify a pit file. This ended up working for me. I've since flashed to JK3 and am about to go back to JPU.
Reply:
I actually do see an error message E:can't mount /dev/block/mmcblk0p1, Can't mount SD card.
I should mention that Im using the unlocked bell phone on fido. Will i lose the unlock if i downgrade? Also, if you could point me to the site where i can download bell firmware, that would be awesome. I went to samfirmware.com and they dont have canadian versions there.
Unless one of the pros comes by and says otherwise, I understand that's the error indicating internal sdcard issues.
However... if the thing is dead, you can't hurt it more by trying some fixes
You can get the official and unofficial Bell firmwares from samfirmware.com, you just have to look in the US section. You want the firmwares starting with "i9000UG". Here's direct download links for you:
JH2 (official 2.1)
http://www.multiupload.com/ZNBT2RY5Y0
JK3 (unofficial 2.2)
http://www.multiupload.com/WTZGSKJGPF
JK4 (official 2.2)
I've heard people flashing this via CWM but I haven't see the files.
Also, I've seen references to people saying their phones begin working again after this error msg after they've left the battery hour for hours.
Let us know how things go.
Reply:
No go. When i flash to 2.1, it just shows the "S" screen and turns off. When i flash to 2.2, does the same thing as my first post. I still can get to the download screen through all of this so I hope its not messed up too bad.
I tried several times this afternoon before it worked including clearing data/cache.
Although, I had a different error message so you might be SOL in the end.
called samsung
So I called samsung this morning and they basically said they won't repair it because Bell handles repairs. Since I dont have a bell account, I can't get it repaired. I keep reading on forums that if you can get into the download mode, if you see the battery icon when you plug the phone in, its not totally bricked so i still have hope yet everything I've tried doesn't work. I tried to adb into the phone in recovery mode and it detects it but says I dont have permissions to push files onto the phone. If anyone can tell me what possibly went wrong and if it is fixable, how, that'd be awesome because right now this is a very expensive paperweight.
So, to make a long story, short, for the past couple of days my phone has been soft-bricked... It first happened when I attempted to flash dmodv6 in CWM. Everything looked good throughout the installation, however, when I rebooted my device, I got stuck in a boot loop where It would say "Samsung Galaxy S III GT-I8190" for a few seconds, the screen would go black, then say the same thing again... over and over and over...
After a lot of trial and error because of NOT making a nandroid backup via CWM (stupid, I know - I had made one via Titanium Backup and thought that might be good enough), I finally was able to boot. Thanks to xXPR0T0TYPEXx, I was able to flash another rom by puting my external sd card into another phone, loading another rom onto it, and putting it back in my phone. I now had Cyanogenmod10 and was able to boot back up.
I attempted to restore the Titanium Backup I had made with this new rom (stupid again, I know) and it made almost every service on the phone stop working... I desperately wanted just to get back to square one - to install stock firmware and go from there. I followed tys0n's guide on flashing stock recovery then attempted to install stock firmware... All seemingly went well - I booted up, got past the initial "Samsung Galaxy S III GT-I8190" logo and finally got hung up at the "Samsung" logo. I left it one while I went to sleep, just to see if it would eventually work... I woke up and it was still the same. I tried flashing different version of the same stock firmware but it all ended in getting hung up at the "Samsung" logo.
A major problem is that I absolutely CANNOT flash a custom recovery via Odin - it just will NOT work. Everything looks good on Odin's end - I PASS, get the (succeed 1 / failed 0) thing but am sent to stock recovery every time I do the 3 button combination. I've tried many version of CWM and TWRP.... NOTHING. I've even unticked the "Auto-Reboot" button in Odin and pulled the usb cable and battery upon completion but, but nothing ever works. The only way I was ever able to get CWM on my phone in the first place was by an in-phone app... Rom Manager, maybe? I can't remember. But, as it is, that method is out of the question.
I've learned a lot about what I did wrong so that's the only good part of all of this. Now, all that's left is to fix the thing so I can go about it right. I'm completely out of ideas, have spent almost a full 24 hours searching solutions to this problem and I am at wits end...
I just want to get back to stock firmware... Any ideas, guys? Should I go about re-partitioning my device at this time?
I have the PIT file... but I'm not sure as to which firmware to choose. I imagine a firmware that is 4.1.1 like my phone was... but I'm not sure about the region. I live in the US and there is no US or North American region firmware version.Can anyone shed some light on which one I should choose?
My SSN underneath my battery say "GTI8190GSMH".
I'm sorry this is so long, I just wanted to explain what happened as best as I could. So, should I go about re-partitioning my device at this point? If so, what firmware would you recommend for my model? Are different region versions okay for a this method?
Or is there another way?
Thanks, guys. :silly:
Some additional details (if it will help): I can, indeed, boot into both recovery and download mode. I just can't seem to flash a stock rom that will boot past the "Samsung" logo.
I've even attempted to flash the param file after the rom flash but it didn't help.
AffectiveEffect said:
Some additional details (if it will help): I can, indeed, boot into both recovery and download mode. I just can't seem to flash a stock rom that will boot past the "Samsung" logo.
I've even attempted to flash the param file after the rom flash but it didn't help.
Click to expand...
Click to collapse
Do you have the stock recovery now instead CWM? If yes do (if you didn't try it) a factory/data reset and wipe cache but it will delete your pics, music etc on your internal storage too.
xXPR0T0TYPEXx said:
Do you have the stock recovery now instead CWM? If yes do (if you didn't try it) a factory/data reset and wipe cache but it will delete your pics, music etc on your internal storage too.
Click to expand...
Click to collapse
Yeah, I have stock recovery now and I have tried that many, many times... Even if I install something like CyanogenMod, it still gets hung up on the CyanogenMod boot screen... And if I boot a stock firmware, it gets hung up at the same place at the "Samsung" logo...
I have an idea that one of the only options left is a PIT re-partitioning... If so, how would I properly go about that? Load the PIT file and the stock firmware in odin? Or only the PIT as PDA? I've heard a couple of different things and am unsure.
AffectiveEffect said:
Yeah, I have stock recovery now and I have tried that many, many times... Even if I install something like CyanogenMod, it still gets hung up on the CyanogenMod boot screen... And if I boot a stock firmware, it gets hung up at the same place at the "Samsung" logo...
I have an idea that one of the only options left is a PIT re-partitioning... If so, how would I properly go about that? Load the PIT file and the stock firmware in odin? Or only the PIT as PDA? I've heard a couple of different things and am unsure.
Click to expand...
Click to collapse
I don't know about PIT files but some people got this message : "CUSTOM PIT BINARY" in recovery mode after flashed a PIT file (maybe they used a other PIT file that wasn't compatible). So make sure you use a PIT file that is GT-i8190 compatible.
I tried flashing the PIT file for the hell of it because I am completely out of ideas.... It failed repeatedly in Odin.
I have no clue on how to fix this... I've tried countless roms and they all get stuck on their respective boot screens. The only one that gave me a glimmer of hope was Cyanogenmod10.2.... It went as far as saying "Android is upgrading" and showed "starting apps" but it got hung up there.
I don't know what to do, guys. Someone help!!!
AffectiveEffect said:
I tried flashing the PIT file for the hell of it because I am completely out of ideas.... It failed repeatedly in Odin.
I have no clue on how to fix this... I've tried countless roms and they all get stuck on their respective boot screens. The only one that gave me a glimmer of hope was Cyanogenmod10.2.... It went as far as saying "Android is upgrading" and showed "starting apps" but it got hung up there.
I don't know what to do, guys. Someone help!!!
Click to expand...
Click to collapse
Use a custom ROM to see if it will fix the problem .Try to flash CyanogenMod 10.2 by NovaFusion via odin or if you flash CyanogenMod 11 then you will automatically get the TWRP recovery. NovaFusion Team Homepage : novafusion.pl. I know you want the stock ROM but try other ROMs to get a booting phone again
xXPR0T0TYPEXx said:
Use a custom ROM to see if it will fix the problem .Try to flash CyanogenMod 10.2 by NovaFusion via odin or if you flash CyanogenMod 11 then you will automatically get the TWRP recovery. NovaFusion Team Homepage : novafusion.pl. I know you want the stock ROM but try other ROMs to get a booting phone again
Click to expand...
Click to collapse
I have... I've tried numerous stock roms and numerous custom roms... all versions of Cyanogenmod, Chameleon, Carbon, Slim mod, etc... They all get stuck at their respective logos.
I even tried the Cyanogenmod with TWRP but, as I explained earlier, I absolutely CAN NOT flash a custom recovery unless I use what ever app I used.... It doesn't work with Odin or with a rom. I don't know why.
I wish someone had more info on repartitioning my phone and if it would help.
NEED HELP?
AffectiveEffect said:
So, to make a long story, short, for the past couple of days my phone has been soft-bricked... It first happened when I attempted to flash dmodv6 in CWM. Everything looked good throughout the installation, however, when I rebooted my device, I got stuck in a boot loop where It would say "Samsung Galaxy S III GT-I8190" for a few seconds, the screen would go black, then say the same thing again... over and over and over...
After a lot of trial and error because of NOT making a nandroid backup via CWM (stupid, I know - I had made one via Titanium Backup and thought that might be good enough), I finally was able to boot. Thanks to xXPR0T0TYPEXx, I was able to flash another rom by puting my external sd card into another phone, loading another rom onto it, and putting it back in my phone. I now had Cyanogenmod10 and was able to boot back up.
I attempted to restore the Titanium Backup I had made with this new rom (stupid again, I know) and it made almost every service on the phone stop working... I desperately wanted just to get back to square one - to install stock firmware and go from there. I followed tys0n's guide on flashing stock recovery then attempted to install stock firmware... All seemingly went well - I booted up, got past the initial "Samsung Galaxy S III GT-I8190" logo and finally got hung up at the "Samsung" logo. I left it one while I went to sleep, just to see if it would eventually work... I woke up and it was still the same. I tried flashing different version of the same stock firmware but it all ended in getting hung up at the "Samsung" logo.
A major problem is that I absolutely CANNOT flash a custom recovery via Odin - it just will NOT work. Everything looks good on Odin's end - I PASS, get the (succeed 1 / failed 0) thing but am sent to stock recovery every time I do the 3 button combination. I've tried many version of CWM and TWRP.... NOTHING. I've even unticked the "Auto-Reboot" button in Odin and pulled the usb cable and battery upon completion but, but nothing ever works. The only way I was ever able to get CWM on my phone in the first place was by an in-phone app... Rom Manager, maybe? I can't remember. But, as it is, that method is out of the question.
I've learned a lot about what I did wrong so that's the only good part of all of this. Now, all that's left is to fix the thing so I can go about it right. I'm completely out of ideas, have spent almost a full 24 hours searching solutions to this problem and I am at wits end...
I just want to get back to stock firmware... Any ideas, guys? Should I go about re-partitioning my device at this time?
I have the PIT file... but I'm not sure as to which firmware to choose. I imagine a firmware that is 4.1.1 like my phone was... but I'm not sure about the region. I live in the US and there is no US or North American region firmware version.Can anyone shed some light on which one I should choose?
My SSN underneath my battery say "GTI8190GSMH".
I'm sorry this is so long, I just wanted to explain what happened as best as I could. So, should I go about re-partitioning my device at this point? If so, what firmware would you recommend for my model? Are different region versions okay for a this method?
Or is there another way?
Thanks, guys. :silly:
Click to expand...
Click to collapse
i got same problem with you before im wayback dmod v6 before and stuck at samsung logo i just try hard reset
1. open your phone
2. remove battery and put the battery try and try til u get in recovery mode (CWM) maybe just tried almost 20x restarting in logo til u in CWM :victory:
3. re-Flash your dmod v6 this way for dirty rom like what i said (softbricks)
4. just flash another new rom whatever u like or dmod v6.
5. I HOPE IT HELPS DONT FORGET TO THANKS <3 :highfive:
So I decided to flash a rom. I haven't done so on this galaxy s6 edge. I've always done it on my previous galaxy phones. The phone already had all the pre-reqs for EXTREME SYNDICATE. Once the phone rebooted to download, I used odin to push out the new OE2 FLASH ME. After that was done the phone just went into a boot loop. I double checked and made sure all the files were correct.
Now I am at a point where even using odin with stock image just goes to samsung splash screen and song then just gives me a Startup Failed - Please connect verizon repair etc.
Is there anything I can do on my end or am I screwed with this phone now. I can still go to download mode and the recovery mode that lets me wipe, reboot etc. But nothing seems to work. Unless I am missing something here.
All help is appreciated, thanks!
Mods can close this thread. I tried everything. Eventually flashing different OE2 and OF1 finally got it working even though I flashed the stock ....
Hello, i have been researching for this issue that i have for over a month now, and yet i haven't found any solution or even a clue on how to fix it, and im sure lots of people are having the same issue that im having, let me explain what exactly happened to my phone and what i exactly tried
i was running on 5.0.1 G920TUVU1AOCG, and at that time "Ping Pong Root" was not yet available, so the only way to root the phone was to flash the "g920t_of6_aou_kernel_v1.tar" witch i did and installed SU using "g925t_of6_aou_twrp_recovery_v13.tar" and the phone worked perfect after that, and after the 5.1.1 lollipop came out, i decided to upgrade to that, so i flashed stock 5.1.1 odin firmware and flash the custom kernel "g920t_of6_aou_kernel_v1.tar" to get it out the bootloop since it was flashed previously on it, it worked and booted up and all seemed to be fine, i also wanted to perform a factory reset, and here is where the PROBLEM started, i forgot to turn on OEM Unlocking in Dev options, so after the factory reset, the phone got stuck on the bootloop "Samsung galaxy s6; powered by android" and the only way to make it bypass this bootloop is by flashing the "g920t_of6_aou_kernel_v1.tar" again, but i cant flash that because i forgot to turn on the OEM Unlocking in the dev options, and every time i try for flash any custom recovery or custom kernel and will give me "Custom Binary (BOOT) blocked by FRP Lock", so now im stuck on the bootloop, i cant access the phone to turn on the OEM Unlocking, Phone is basically STUCK.
I have tried flashing all stock firmwares that are, i have tried flashing all available kernels, i have tried Factory resetting the phone and wiping the catch, i have tried every guide on XDA and nothing ever worked for me.
i apologize for the long explanation, but i just dont want people to think that i am repeating the same question over and over since a similar question was asked by other members on XDA previously.
Thank you very much for taking the time and reading my question.
Do you still have recovery mode?
EDIT: In this thread: http://forum.xda-developers.com/sprint-galaxy-s6/help/custom-binary-blocked-frp-lock-t3152054 every person that had the problem fixed it by flashing the stock firmware. make sure you're flashing the stock firmware that's the exact same as the firmware when your phone worked. So if you were on OI1 for example, you have to flash OI1 firmware or it wouldn't work. Try a couple times too, I've heard ODIN can be wonky sometimes.
Thank you for the reply, i actually did try all stock firmwares, it was on 5.1.1 OF8 before it bricked, and i tried that one too, no luck, flashing gives me successful, but phone is still stuck on the boot loop, i hope i can find a solution for this issue.
ameenz77 said:
Thank you for the reply, i actually did try all stock firmwares, it was on 5.1.1 OF8 before it bricked, and i tried that one too, no luck, flashing gives me successful, but phone is still stuck on the boot loop, i hope i can find a solution for this issue.
Click to expand...
Click to collapse
Try to factory reset in recovery and flash the tar trough ODIN again. If that doesn't work, try to restore it with SmartSwitch. A lot of people have success restoring their phone that way. If that doesn't work then I don't know.
I'm a complete newbie to android phone modding, and I was really proud of myself when I was able to install the Cyanogen 12.1 and Google Apps onto my Samsung S3 Mini. However, I made the mistake of trying to put my work email on it, which requires that my phone be encrypted. Well, I guess the encryption and rooted phone didn't want to play nice together, so I got the error message that my phone would be factory reset. Boo! Well, it got worse. Instead of a factory reset, my rooted phone now is stuck in what I have now learned is called a bootloop. Basically I turn my phone on, and the Cyanogen start screen (with the text "TEAMWIN") just infinitely flashes on the screen until I pull the battery.
I have tried using Odin 3.07 and cm12.1_golden.nova.20160210.ODIN_TWRP.tar.md5. I do the three button system boot, connect the usb, run Odin, get the phone recognized, and then install the .md5 in the PDA section of Odin. It tells me that it succeeded, but when I restart my phone it's still the same bootloop. I also tried swearing, but that didn't help either.
Has anyone else out there had experience with Cyanogen and this particular error? I would love to get this phone working again... preferably with either a Lollipop version of android or back to Cyanogen 12.1.
Any info would be greatly appreciated! Thanks everyone.
So I've got an update if anyone's interested... I can't call it progress, but it's a different problem now.
I was able to download and use Odin to do what was shown on this link: http://forum.xda-developers.com/showthread.php?t=2122548&highlight=root
Everything worked in Odin, the phone rebooted, and went to the Team Win Recovery Project diagnostics screen, rebooted again, and then to the samsung logo. However, it immediately goes to the "Encryption Failed" error screen, and the only option is to 'reset device'. Of course, doing this just reboots the phone and it then has the Team Win loading screen, Team Win Recovery Project diags screen, Samsung logo, and back to the 'Encryption Failed' screen again. So now I have a new infinite loop to solve. *sigh*
any thoughts?
Have you been able to get into TWRP? If you are, maybe you could wipe everything from there and flash the recovery version of your ROM.
I was able to put the stock bootloader onto the phone using Odin, download the original tar from here: http://live.samsung-updates.com/index.php?device=GT-I8190, then used the stock bootloader to install it from the sd card. Everything went fine, but now when I boot the phone it just hangs on the Samsung Galaxy S3 mini GT-i18190 start screen indefinitely. Is this progress, or have I created a new problem now?
You're playing around with heavy stuff. I won't recommend using an upgrade flash (CM over Odin) as an full flash. Please try flashing a stock image.
If you did something wrong to the partitioning, then it's likely to not allow you to do a successfull factory reset. Maybe you can try re-flashing a stock Odin image with PIT repartitioning.
Remember to try to backup the EFS folder, doing that kind of flash might wipe it.