So I have my new Rogers Captivate for 2 weeks and I decide I would like to flash a Custom ROM onto it. I duly search the forums, reading the stickies and things like that.
I find the guide on how to flash Custom ROMS with videos, decide following these will be my best guide. So I download the ODIN one click as told, get the phone into download mode and flash it back to stock as the video showed me. Though this completed successfully, I ended up with an AT&T boot loop after it was done with my button combo to access download mode broken. So after I do some more searching on the forum, I find out this is not an uncommon problem. The solution is to make or buy a USB Jig. So I order a USB Jig off eBay. Guy I bought it from was great, shipped it out to me and it arrived today. I get it, pop it in and bam. Phone goes into download mode.
Next I follow the instructions a few other Canadian Captivate Owners have posted and flash it back to Rogers 2.1 Stock with Odin 1.3 and no pit file. I still get the AT&T logo on boot but it gets past it now. Goes to the I896 boot screen, then the Animated Samsung Bootscreen, then to the Rogers Boot screen with the dots moving on the bottom. I am patient and wait a bit. It finishes with that and then goes to a completely black screen. At first I thought the phone as off, but I touched the buttons on the bottom and they light up. They stay lit up as well.
Thinking something has gone wrong, I reflash it again. Same thing happens. I try flashing the same ROM with a pit file from the Odin download. Same thing happens again. Nothing but a black screen and the buttons lit up.
I am at a loss as to what to do next, as I have searched the forums and not found a good answer for this problem. Should I try flashing a new stock ROM onto it? What is my next move here?
Phone:
Rogers Captivate 10.10
ROM currently installed:
I896UXJI2-homebinary.tar
*EDIT*
Nevermind, I managed to fix it. I had the AIO Captivate Tools 2.6 (Rogers) installed and after the phone booted it dutifully reported that it was in debugging mode. So I selected load custom ROM and selected Firefly 2.3. It goes through its thing and clockwork recovery installs. I select to install the ROM.zip AIO Tools copied over and after it does its thing. Presto, a few minutes later the phone boots into Firefly 2.3 with no problems. I am running the ROM I wanted and I am a lot happier now.
Running a Captivate that I rooted and upgraded to 2.3 over a year ago. All was working well. This week it began freezing after it fully loaded after a reboot or power-on. It will go through the ATT, the Corn logo, and the S animation. It will scan the USB storage devides (internal and external) and then quietly freeze. It will sit there with the wallpaper moving around, but the first key stroke done after all has been loaded up will cause everything to freeze.
While it is starting up, I can enter my passcode, use all of the menu buttons and get to applications or settings. However, once the scanning is done, wherever I am will freeze. I can get all the way through the perform a factory reset procedure before the scanning is done, but it I will run out of time before the phone can start the reset.
Seems like something in 2.3 got corrupted and I need to reload the software without going through the boot-up (I went through Kies, but once the phone booted up, it disappeared from Kies and it told me the phone was disconnected).
Any step by step to either repair 2.3 or to install another droid system prior to the phone booting up? I'd appreciate the help.
ktvanhorne said:
Running a Captivate that I rooted and upgraded to 2.3 over a year ago. All was working well. This week it began freezing after it fully loaded after a reboot or power-on. It will go through the ATT, the Corn logo, and the S animation. It will scan the USB storage devides (internal and external) and then quietly freeze. It will sit there with the wallpaper moving around, but the first key stroke done after all has been loaded up will cause everything to freeze.
While it is starting up, I can enter my passcode, use all of the menu buttons and get to applications or settings. However, once the scanning is done, wherever I am will freeze. I can get all the way through the perform a factory reset procedure before the scanning is done, but it I will run out of time before the phone can start the reset.
Seems like something in 2.3 got corrupted and I need to reload the software without going through the boot-up (I went through Kies, but once the phone booted up, it disappeared from Kies and it told me the phone was disconnected).
Any step by step to either repair 2.3 or to install another droid system prior to the phone booting up? I'd appreciate the help.
Click to expand...
Click to collapse
You could grab Odin KK4 without bootloaders and flash it in download mode.
From there, use Odin 1.87 to flash Corn kernel if you wanna be rooted and have a custom recovery again.
Then it's your choice whether you wanna stay on 2.3 or look into 4.2 ROMs.
BWolf56 said:
You could grab Odin KK4 without bootloaders and flash it in download mode.
From there, use Odin 1.87 to flash Corn kernel if you wanna be rooted and have a custom recovery again.
Then it's your choice whether you wanna stay on 2.3 or look into 4.2 ROMs.
Click to expand...
Click to collapse
So, do you agree with me that it seems to be a software issue? Or is this something to try and see if all goes well with the new install? I have no problem if this is something to try since nothing else is working, but I am just curious if my diagnosis is correct.
Thanks for the quick respond.
KT
ktvanhorne said:
So, do you agree with me that it seems to be a software issue? Or is this something to try and see if all goes well with the new install? I have no problem if this is something to try since nothing else is working, but I am just curious if my diagnosis is correct.
Thanks for the quick respond.
KT
Click to expand...
Click to collapse
My guess is that something got corrupted, so yes, software issue. Find the required Odin and 2.3 kernel for the I9000 and flash them in download mode. It should run fine after that.
Got things resolved
Thanks for the help. I tried to follow your steps, but I could never get the phone connected to the PC. It would charge, but not connect to let Odin in. (It will connect to another PC without issues. I uninstalled and reinstalled the drivers, but no dice). However, in the process of putting the phone into download mode and rebooting it back somehow got me into the recovery screen. I did a factory reset through there and it worked.
Thanks for the help of all the contributers to the site.
K
So, to make a long story, short, for the past couple of days my phone has been soft-bricked... It first happened when I attempted to flash dmodv6 in CWM. Everything looked good throughout the installation, however, when I rebooted my device, I got stuck in a boot loop where It would say "Samsung Galaxy S III GT-I8190" for a few seconds, the screen would go black, then say the same thing again... over and over and over...
After a lot of trial and error because of NOT making a nandroid backup via CWM (stupid, I know - I had made one via Titanium Backup and thought that might be good enough), I finally was able to boot. Thanks to xXPR0T0TYPEXx, I was able to flash another rom by puting my external sd card into another phone, loading another rom onto it, and putting it back in my phone. I now had Cyanogenmod10 and was able to boot back up.
I attempted to restore the Titanium Backup I had made with this new rom (stupid again, I know) and it made almost every service on the phone stop working... I desperately wanted just to get back to square one - to install stock firmware and go from there. I followed tys0n's guide on flashing stock recovery then attempted to install stock firmware... All seemingly went well - I booted up, got past the initial "Samsung Galaxy S III GT-I8190" logo and finally got hung up at the "Samsung" logo. I left it one while I went to sleep, just to see if it would eventually work... I woke up and it was still the same. I tried flashing different version of the same stock firmware but it all ended in getting hung up at the "Samsung" logo.
A major problem is that I absolutely CANNOT flash a custom recovery via Odin - it just will NOT work. Everything looks good on Odin's end - I PASS, get the (succeed 1 / failed 0) thing but am sent to stock recovery every time I do the 3 button combination. I've tried many version of CWM and TWRP.... NOTHING. I've even unticked the "Auto-Reboot" button in Odin and pulled the usb cable and battery upon completion but, but nothing ever works. The only way I was ever able to get CWM on my phone in the first place was by an in-phone app... Rom Manager, maybe? I can't remember. But, as it is, that method is out of the question.
I've learned a lot about what I did wrong so that's the only good part of all of this. Now, all that's left is to fix the thing so I can go about it right. I'm completely out of ideas, have spent almost a full 24 hours searching solutions to this problem and I am at wits end...
I just want to get back to stock firmware... Any ideas, guys? Should I go about re-partitioning my device at this time?
I have the PIT file... but I'm not sure as to which firmware to choose. I imagine a firmware that is 4.1.1 like my phone was... but I'm not sure about the region. I live in the US and there is no US or North American region firmware version.Can anyone shed some light on which one I should choose?
My SSN underneath my battery say "GTI8190GSMH".
I'm sorry this is so long, I just wanted to explain what happened as best as I could. So, should I go about re-partitioning my device at this point? If so, what firmware would you recommend for my model? Are different region versions okay for a this method?
Or is there another way?
Thanks, guys. :silly:
Some additional details (if it will help): I can, indeed, boot into both recovery and download mode. I just can't seem to flash a stock rom that will boot past the "Samsung" logo.
I've even attempted to flash the param file after the rom flash but it didn't help.
AffectiveEffect said:
Some additional details (if it will help): I can, indeed, boot into both recovery and download mode. I just can't seem to flash a stock rom that will boot past the "Samsung" logo.
I've even attempted to flash the param file after the rom flash but it didn't help.
Click to expand...
Click to collapse
Do you have the stock recovery now instead CWM? If yes do (if you didn't try it) a factory/data reset and wipe cache but it will delete your pics, music etc on your internal storage too.
xXPR0T0TYPEXx said:
Do you have the stock recovery now instead CWM? If yes do (if you didn't try it) a factory/data reset and wipe cache but it will delete your pics, music etc on your internal storage too.
Click to expand...
Click to collapse
Yeah, I have stock recovery now and I have tried that many, many times... Even if I install something like CyanogenMod, it still gets hung up on the CyanogenMod boot screen... And if I boot a stock firmware, it gets hung up at the same place at the "Samsung" logo...
I have an idea that one of the only options left is a PIT re-partitioning... If so, how would I properly go about that? Load the PIT file and the stock firmware in odin? Or only the PIT as PDA? I've heard a couple of different things and am unsure.
AffectiveEffect said:
Yeah, I have stock recovery now and I have tried that many, many times... Even if I install something like CyanogenMod, it still gets hung up on the CyanogenMod boot screen... And if I boot a stock firmware, it gets hung up at the same place at the "Samsung" logo...
I have an idea that one of the only options left is a PIT re-partitioning... If so, how would I properly go about that? Load the PIT file and the stock firmware in odin? Or only the PIT as PDA? I've heard a couple of different things and am unsure.
Click to expand...
Click to collapse
I don't know about PIT files but some people got this message : "CUSTOM PIT BINARY" in recovery mode after flashed a PIT file (maybe they used a other PIT file that wasn't compatible). So make sure you use a PIT file that is GT-i8190 compatible.
I tried flashing the PIT file for the hell of it because I am completely out of ideas.... It failed repeatedly in Odin.
I have no clue on how to fix this... I've tried countless roms and they all get stuck on their respective boot screens. The only one that gave me a glimmer of hope was Cyanogenmod10.2.... It went as far as saying "Android is upgrading" and showed "starting apps" but it got hung up there.
I don't know what to do, guys. Someone help!!!
AffectiveEffect said:
I tried flashing the PIT file for the hell of it because I am completely out of ideas.... It failed repeatedly in Odin.
I have no clue on how to fix this... I've tried countless roms and they all get stuck on their respective boot screens. The only one that gave me a glimmer of hope was Cyanogenmod10.2.... It went as far as saying "Android is upgrading" and showed "starting apps" but it got hung up there.
I don't know what to do, guys. Someone help!!!
Click to expand...
Click to collapse
Use a custom ROM to see if it will fix the problem .Try to flash CyanogenMod 10.2 by NovaFusion via odin or if you flash CyanogenMod 11 then you will automatically get the TWRP recovery. NovaFusion Team Homepage : novafusion.pl. I know you want the stock ROM but try other ROMs to get a booting phone again
xXPR0T0TYPEXx said:
Use a custom ROM to see if it will fix the problem .Try to flash CyanogenMod 10.2 by NovaFusion via odin or if you flash CyanogenMod 11 then you will automatically get the TWRP recovery. NovaFusion Team Homepage : novafusion.pl. I know you want the stock ROM but try other ROMs to get a booting phone again
Click to expand...
Click to collapse
I have... I've tried numerous stock roms and numerous custom roms... all versions of Cyanogenmod, Chameleon, Carbon, Slim mod, etc... They all get stuck at their respective logos.
I even tried the Cyanogenmod with TWRP but, as I explained earlier, I absolutely CAN NOT flash a custom recovery unless I use what ever app I used.... It doesn't work with Odin or with a rom. I don't know why.
I wish someone had more info on repartitioning my phone and if it would help.
NEED HELP?
AffectiveEffect said:
So, to make a long story, short, for the past couple of days my phone has been soft-bricked... It first happened when I attempted to flash dmodv6 in CWM. Everything looked good throughout the installation, however, when I rebooted my device, I got stuck in a boot loop where It would say "Samsung Galaxy S III GT-I8190" for a few seconds, the screen would go black, then say the same thing again... over and over and over...
After a lot of trial and error because of NOT making a nandroid backup via CWM (stupid, I know - I had made one via Titanium Backup and thought that might be good enough), I finally was able to boot. Thanks to xXPR0T0TYPEXx, I was able to flash another rom by puting my external sd card into another phone, loading another rom onto it, and putting it back in my phone. I now had Cyanogenmod10 and was able to boot back up.
I attempted to restore the Titanium Backup I had made with this new rom (stupid again, I know) and it made almost every service on the phone stop working... I desperately wanted just to get back to square one - to install stock firmware and go from there. I followed tys0n's guide on flashing stock recovery then attempted to install stock firmware... All seemingly went well - I booted up, got past the initial "Samsung Galaxy S III GT-I8190" logo and finally got hung up at the "Samsung" logo. I left it one while I went to sleep, just to see if it would eventually work... I woke up and it was still the same. I tried flashing different version of the same stock firmware but it all ended in getting hung up at the "Samsung" logo.
A major problem is that I absolutely CANNOT flash a custom recovery via Odin - it just will NOT work. Everything looks good on Odin's end - I PASS, get the (succeed 1 / failed 0) thing but am sent to stock recovery every time I do the 3 button combination. I've tried many version of CWM and TWRP.... NOTHING. I've even unticked the "Auto-Reboot" button in Odin and pulled the usb cable and battery upon completion but, but nothing ever works. The only way I was ever able to get CWM on my phone in the first place was by an in-phone app... Rom Manager, maybe? I can't remember. But, as it is, that method is out of the question.
I've learned a lot about what I did wrong so that's the only good part of all of this. Now, all that's left is to fix the thing so I can go about it right. I'm completely out of ideas, have spent almost a full 24 hours searching solutions to this problem and I am at wits end...
I just want to get back to stock firmware... Any ideas, guys? Should I go about re-partitioning my device at this time?
I have the PIT file... but I'm not sure as to which firmware to choose. I imagine a firmware that is 4.1.1 like my phone was... but I'm not sure about the region. I live in the US and there is no US or North American region firmware version.Can anyone shed some light on which one I should choose?
My SSN underneath my battery say "GTI8190GSMH".
I'm sorry this is so long, I just wanted to explain what happened as best as I could. So, should I go about re-partitioning my device at this point? If so, what firmware would you recommend for my model? Are different region versions okay for a this method?
Or is there another way?
Thanks, guys. :silly:
Click to expand...
Click to collapse
i got same problem with you before im wayback dmod v6 before and stuck at samsung logo i just try hard reset
1. open your phone
2. remove battery and put the battery try and try til u get in recovery mode (CWM) maybe just tried almost 20x restarting in logo til u in CWM :victory:
3. re-Flash your dmod v6 this way for dirty rom like what i said (softbricks)
4. just flash another new rom whatever u like or dmod v6.
5. I HOPE IT HELPS DONT FORGET TO THANKS <3 :highfive:
hello everyone, this thread might seem like a repost to some of you, but since the answer has yet to be found on the other thread, might as well try asking about it myself
so i've got a galaxy s3 mini (the i8190 version, not the l or the n) it's in stock 4.1.2 international version. yesterday, out of nowhere the phone just keeps on rebooting after a few minutes of booting up ( it got to the lockscreen and home screen just fine, but it keeps rebooting after that). and i think, well might as well just flash something on top of this stock rom so i decided to get the cm11 from novafusion, along with odin and tried to flash it. it all goes well in odin, no problem at all (odin flashes green passed sign).
but the strange thing is, when the phone rebooted, it goes back to the stock rom, with all the apps intact and with stock recovery. so far, i've been trying to flash almost everything into this phone via odin and odin always says it succeeded but nevertheless, everything stays the same, i've tried flashing some custom roms, custom recoveries but it doesn't seem to work. and the flash counter never goes up, it still says "custom binary download : no"
i've also tried to go to stock recovery and tried to wipe data / factory reset the phone which it said it has done successfully but when i booted in, nothing changed. i'm still logged on as my account with all the apps and files intact.
this problem has also been asked here but no definitive answer seems to have surfaced there.
please, any help would be appreciated
So I decided to flash a rom. I haven't done so on this galaxy s6 edge. I've always done it on my previous galaxy phones. The phone already had all the pre-reqs for EXTREME SYNDICATE. Once the phone rebooted to download, I used odin to push out the new OE2 FLASH ME. After that was done the phone just went into a boot loop. I double checked and made sure all the files were correct.
Now I am at a point where even using odin with stock image just goes to samsung splash screen and song then just gives me a Startup Failed - Please connect verizon repair etc.
Is there anything I can do on my end or am I screwed with this phone now. I can still go to download mode and the recovery mode that lets me wipe, reboot etc. But nothing seems to work. Unless I am missing something here.
All help is appreciated, thanks!
Mods can close this thread. I tried everything. Eventually flashing different OE2 and OF1 finally got it working even though I flashed the stock ....