Database Develop

[Q] Unroot Sprint HTC One from CM11

HTC One M7
SPRINT
S-ON
UNLOCKED
HBOOT 1.56
Radio 1.00.20.1108
OS 4.06.651.9
CM 11 20140504-SNAPSHOT
I need to restore my phone to a version of stock android (either an actual stock RUU or Android Revolution or whatever) so that I can get to the UICC option to turn off my SIM card (this setting is not available in CyanogenMod apparently).
Because I am on a newer firmware and because I am S-ON I do not seem to be able to install any of the (mostly older) RUUs I have found. Any suggestions? Is there an RUU for 4.06.651.9 that I am not seeing? Is there another way to roll back my OS to allow an older RUU to be installed? Another option altogether? A way to S-OFF while on CM?
Thanks for your help

pc010121 said:
HTC One M7
SPRINT
S-ON
UNLOCKED
HBOOT 1.56
Radio 1.00.20.1108
OS 4.06.651.9
CM 11 20140504-SNAPSHOT
I need to restore my phone to a version of stock android (either an actual stock RUU or Android Revolution or whatever) so that I can get to the UICC option to turn off my SIM card (this setting is not available in CyanogenMod apparently).
Because I am on a newer firmware and because I am S-ON I do not seem to be able to install any of the (mostly older) RUUs I have found. Any suggestions? Is there an RUU for 4.06.651.9 that I am not seeing? Is there another way to roll back my OS to allow an older RUU to be installed? Another option altogether? A way to S-OFF while on CM?
Thanks for your help
Click to expand...
Click to collapse
you can use this then take the OTA updates
http://www.htc1guru.com/dld/guru_reset_m7_sprint_3-04-651-2-zip/

Is this the 3.04.651.2 RUU? If so, I already have a copy, and when I attempt to run the ARUwizard I get Error 155. Most likely I am doing something wrong. I just assumed that since I am already on 4.06.651.9 that the problem was I couldn't install the older 3.04.651.2 version. Thoughts?

pc010121 said:
Is this the 3.04.651.2 RUU? If so, I already have a copy, and when I attempt to run the ARUwizard I get Error 155. Most likely I am doing something wrong. I just assumed that since I am already on 4.06.651.9 that the problem was I couldn't install the older 3.04.651.2 version. Thoughts?
Click to expand...
Click to collapse
This is exactly the same issue I'm experiencing. Well, now I'm even beyond this point... I am only able to boot the phone to the bootloader.
Edit: I am relocked as I am S-ON. I can't update firmware as the signature check fails. Flashing the 3.04.651.2 zip has a signature verify fail, as well.

Hope this helps
cheesesoda said:
This is exactly the same issue I'm experiencing. Well, now I'm even beyond this point... I am only able to boot the phone to the bootloader.
Click to expand...
Click to collapse
If you can still boot to bootloader your phone is fine. You should still have recovery (TWRP?) on your phone I assume. Regardless here are some steps that should help:
1. Figure out if you are S-ON (is found on the bootloader screen)
2. If you are S-ON, try Rumrunner to get S-OFF (just google it). This will allow you to install any RUU regardless of your firmware.
3. If Rumrunner doesn't work or you don't want to go to S-OFF then download the 4.06 RUU here http://forum.xda-developers.com/showthread.php?t=2658910
The problem is your firmware is ahead of the corresponding firmware of the 3.X release. As such you have to install from the newer RUU.

pc010121 said:
If you can still boot to bootloader your phone is fine. You should still have recovery (TWRP?) on your phone I assume. Regardless here are some steps that should help:
1. Figure out if you are S-ON (is found on the bootloader screen)
2. If you are S-ON, try Rumrunner to get S-OFF (just google it). This will allow you to install any RUU regardless of your firmware.
3. If Rumrunner doesn't work or you don't want to go to S-OFF then download the 4.06 RUU here http://forum.xda-developers.com/showthread.php?t=2658910
The problem is your firmware is ahead of the corresponding firmware of the 3.X release. As such you have to install from the newer RUU.
Click to expand...
Click to collapse
Actually, it seems that the phone is wiped; I can't boot my recovery. As a result, I can't really get S-OFF. I'll try the 4.06 RUU, but would it make a difference that it's .4 and not .9?
EDIT: I'm talking out of my ass right now. Long day, and this isn't helping. I am figuring it out; unlocked the bootloader, and now things seem to be functional. Well, except CM doesn't seem to want to boot any longer, but that shouldn't matter for long.
EDIT 2: How can I get S-OFF without enabling debugging? As of right now, CM is just in a boot loop.

Sim Unlock Sprint HTC One Max
I almost cannot believe how many different ROMs I've tried to flash after wiping out my original ROM.
Bootloader unlocked and rooted I managaged to relock the bootloader while trying to fastboot flash a stock ROM, which also failed.
Beleive it or not, I've have found a couple that will boot up with my Sprint HTC One Max . I was able to re-unlock the bootloader, flash a new rom and even recover user data I had backed up to my PC via adb backup.
All this for not, as I still cannot find a Sense ROM that will flash on my device and allow me to unnlock the Sim via Sim Unlock Helper.
Any help would be greatly appreciated!!!
TAMPERED
UNLOCKED
Sprint HTC One T6WL S-OFF
CID-SPCS_001
HBOOT-2.49.000
RADIO-1.48.50.0425
I recall reading somewhere that the Unlock Sim Helper should work on Sense 4.1.2 ROM. ????

[Q] flashing rom s-on

I have an AT&T variant m7 running 4.1.2 and I'm gonna be unlocking, flashing tarp, and rooting. I am looking to install the newest viperone Rom and am wondering if I can do this s-on or not, I've read some stuff that says I have to flash boot.img after and some that says before, and others that say I don't need that step at all! I just wanna get this straightened out so I don't screw up. Any help would be appreciated and if there are any other suggestions I'd be happy to hear them
Thank you.

dirtrider129 said:
I have an AT&T variant m7 running 4.1.2 and I'm gonna be unlocking, flashing tarp, and rooting. I am looking to install the newest viperone Rom and am wondering if I can do this s-on or not, I've read some stuff that says I have to flash boot.img after and some that says before, and others that say I don't need that step at all! I just wanna get this straightened out so I don't screw up. Any help would be appreciated and if there are any other suggestions I'd be happy to hear them
Thank you.
Click to expand...
Click to collapse
Get S-off try revone and rumrunner or firewater (don't skip this step)
after your s-off flash the 3.xx.502.x RUU
now flash TWRP 2.6.3.3 and then the ViperOne rom

clsA said:
Get S-off try revone and rumrunner or firewater (don't skip this step)
after your s-off flash the 3.xx.502.x RUU
now flash TWRP 2.6.3.3 and then the ViperOne rom
Click to expand...
Click to collapse
So after I unlock bootloader, flash twrp, and root, once I get s-off, do I need to re-flash the stock recovery before flashing RUU, then flash twrp again then flash viper? Also why the RUU, I just want to understand what I'm doing and why. Thank you so much for your help, I'm definitely a noob and am really interested in this world.

dirtrider129 said:
So after I unlock bootloader, flash twrp, and root, once I get s-off, do I need to re-flash the stock recovery before flashing RUU, then flash twrp again then flash viper? Also why the RUU, I just want to understand what I'm doing and why. Thank you so much for your help, I'm definitely a noob and am really interested in this world.
Click to expand...
Click to collapse
skip the stock recovery step .. after your s-off you can flash the RUU even unlocked... your flashing the RUU to get your hboot / touch screen drivers and radio more up to date.

clsA said:
skip the stock recovery step .. after your s-off you can flash the RUU even unlocked... your flashing the RUU to get your hboot / touch screen drivers and radio more up to date.
Click to expand...
Click to collapse
Oh ok, now I understand. Thanks

clsA said:
skip the stock recovery step .. after your s-off you can flash the RUU even unlocked... your flashing the RUU to get your hboot / touch screen drivers and radio more up to date.
Click to expand...
Click to collapse
Once I flash the RUU zip, will I lose root also?

dirtrider129 said:
Once I flash the RUU zip, will I lose root also?
Click to expand...
Click to collapse
of course you'll have to re-flash recovery and root again

revone failing
clsA said:
of course you'll have to re-flash recovery and root again
Click to expand...
Click to collapse
Ok so I after having a bunch of issues with htcdev site I finally unlocked my bootloader using the kingo program, then I flashed twrp 2633 and rooted although I forgot to erase cache after flashing twrp. At first it didn't boot in recovery, just booted up normally but it worked the second time, after rooting root checker said I didn't have proper root but after rebooting again it says it is rooted. Superuser said I need to update binaries wasn't sure how but I read somewhere to install superSU from playstore. Anyways that's not really my issue, just thought I'd let u know it was goin. When I try running revone, after I run ./revone.bin -P I'm getting revone fail error -6. Coundnt find a strait answer so thought I'd check here. Thanks all and let me know if u need any other info
Dirtrider129

dirtrider129 said:
Ok so I after having a bunch of issues with htcdev site I finally unlocked my bootloader using the kingo program, then I flashed twrp 2633 and rooted although I forgot to erase cache after flashing twrp. At first it didn't boot in recovery, just booted up normally but it worked the second time, after rooting root checker said I didn't have proper root but after rebooting again it says it is rooted. Superuser said I need to update binaries wasn't sure how but I read somewhere to install superSU from playstore. Anyways that's not really my issue, just thought I'd let u know it was goin. When I try running revone, after I run ./revone.bin -P I'm getting revone fail error -6. Coundnt find a strait answer so thought I'd check here. Thanks all and let me know if u need any other info
Dirtrider129
Click to expand...
Click to collapse
I'm not sure why you want to S-off. You have now unlocked, changed recovery, and rooted. You can simply download viper one rom and flash it from recovery. You dont need to flash any boot.img for m7. I hope that helps. If you still want to S-off use rumrunner. revone is not supported for bootloader that comes with 4.1.2. Do note that you cannot s-on again once you s-off the device.

coolshritz said:
I'm not sure why you want to S-off. You have now unlocked, changed recovery, and rooted. You can simply download viper one rom and flash it from recovery. You dont need to flash any boot.img for m7. I hope that helps. If you still want to S-off use rumrunner. revone is not supported for bootloader that comes with 4.1.2. Do note that you cannot s-on again once you s-off the device.
Click to expand...
Click to collapse
I was getting s-off because I was told to get s-off so I could flash the 3.17 ruu to update my hboot/ touchscreen drivers and radio before flashing viper, which I figured so viper would run smoother. I'm a noob just getting into modding. I have a AT&T HTC one running on crickets new gsm network and since I can't get OTAs I first wanted to just get up to 4.4 and sense 6 but then I figured I'd just go custom Rom.

dirtrider129 said:
I was getting s-off because I was told to get s-off so I could flash the 3.17 ruu to update my hboot/ touchscreen drivers and radio before flashing viper, which I figured so viper would run smoother. I'm a noob just getting into modding. I have a AT&T HTC one running on crickets new gsm network and since I can't get OTAs I first wanted to just get up to 4.4 and sense 6 but then I figured I'd just go custom Rom.
Click to expand...
Click to collapse
It is not mandatory to S-Off to flash a rom. Your rom will anyway work in a good way.

clsA said:
skip the stock recovery step .. after your s-off you can flash the RUU even unlocked... your flashing the RUU to get your hboot / touch screen drivers and radio more up to date.
Click to expand...
Click to collapse
Well after failing with revone, rumrunner, and firewater I went ahead and flashed viper, and everything was fine. I can't help be bugged by the fact that you told me to get s-off and flash that ruu to get the updated radio and touchscreen drivers, I read that I need a 4.2 Rom to get revone to work so I am gonna give it another try. I tried running firewater with ARHD and it said that it had an anti-firewater patch. So I am just curious as to what the importance of having the updated hboot, radio, and touchscreen drivers. I just feel like I should still get it done since u told me not to skip that step, not to mention later on down the line when I get more familiar with all of this dev and modding stuff I might want to do other things that require a-off. Thanks for all your help and info . Before I continue with it I made a backup of viper with the setting and themes I've set up, after I get s-off and flash the ruu, should I 're-flash the Rom or can I restore my backup with out changing any of the updated software, I didn't think the Rom would have anything to do with it but I just wanna make sure. Thanks

dirtrider129 said:
Well after failing with revone, rumrunner, and firewater I went ahead and flashed viper, and everything was fine. I can't help be bugged by the fact that you told me to get s-off and flash that ruu to get the updated radio and touchscreen drivers, I read that I need a 4.2 Rom to get revone to work so I am gonna give it another try. I tried running firewater with ARHD and it said that it had an anti-firewater patch. So I am just curious as to what the importance of having the updated hboot, radio, and touchscreen drivers. I just feel like I should still get it done since u told me not to skip that step, not to mention later on down the line when I get more familiar with all of this dev and modding stuff I might want to do other things that require a-off. Thanks for all your help and info . Before I continue with it I made a backup of viper with the setting and themes I've set up, after I get s-off and flash the ruu, should I 're-flash the Rom or can I restore my backup with out changing any of the updated software, I didn't think the Rom would have anything to do with it but I just wanna make sure. Thanks
Click to expand...
Click to collapse
you can restore your backup with the new firmware
for firewater you needed ARHD + ElementalX kernel
it mark just fine with the ViperOne rom also
Revone only works on hboot 1.44 and android 4.1.2 and/or 4.2.2

clsA said:
you can restore your backup with the new firmware
for firewater you needed ARHD + ElementalX kernel
it mark just fine with the ViperOne rom also
Revone only works on hboot 1.44 and android 4.1.2 and/or 4.2.2
Click to expand...
Click to collapse
Do you think firewater will work with viper+Elemental X kernel? If I used the same guide as with ARHD. I tried to s-off with revone by flashing a 4.2.2 viper Rom but I lost all signal and service, so I restored my backup. Also I was wondering since I'm running the 3.17 ruu to update radio and stuff , should I use the 4.18 ruu since its newer? Thanks again for all the help.
UPDATE: Well ran firewater since coudnt get revone to work , took all of like 45 seconds and it said device is s-off. Couldn't believe it after all the trouble I've had.Awesome!

[Q]Back to Stock-Problem

Hi everyone,
I'm trying to get my htc one back to stock, to get the latest ota update (4.4.3), so that I can use the latest venomrom (I think it's 7.0.1 by now).
As far as I understood it, I have to go back to stock to do that, but there were some problems I could not fix.
First my Version is 2.24.206.7 and I can't find any stock recovery for it, I searched the whole internet (that's how it felt), but nothing. I have a backup from my stock rom, that is not the problem.
Second I'm currently S-on, and my hboot is 1.54. I tried to s-off it with firewater, but it did not work.
And I have a custom kernel (ElementalX) installed, is that a problem? If it is, how can I fix it?
I hope someone can help me, and these questions are not already answered somewhere.
Thank you!

umbertoftw said:
Hi everyone,
I'm trying to get my htc one back to stock, to get the latest ota update (4.4.3), so that I can use the latest venomrom (I think it's 7.0.1 by now).
As far as I understood it, I have to go back to stock to do that, but there were some problems I could not fix.
First my Version is 2.24.206.7 and I can't find any stock recovery for it, I searched the whole internet (that's how it felt), but nothing. I have a backup from my stock rom, that is not the problem.
Second I'm currently S-on, and my hboot is 1.54. I tried to s-off it with firewater, but it did not work.
And I have a custom kernel (ElementalX) installed, is that a problem? If it is, how can I fix it?
I hope someone can help me, and these questions are not already answered somewhere.
Thank you!
Click to expand...
Click to collapse
Try to s-off with Rumrunner
after your s-off it's easy to update your firmware and flash ViperOne rom

Thanks for the fast answer!
I wanted to s-off with rumrunner using this guide: http://forum.xda-developers.com/showthread.php?t=2488772
But my firmware is not available, or can I use the universal Rumrunner? I think it does not work with hboot 1.54.

umbertoftw said:
Thanks for the fast answer!
I wanted to s-off with rumrunner using this guide: http://forum.xda-developers.com/showthread.php?t=2488772
But my firmware is not available, or can I use the universal Rumrunner? I think it does not work with hboot 1.54.
Click to expand...
Click to collapse
Yes use the Universal > http://rumrunner.us/rumrunner_downloads/rumrunner_HTC_0.5.0.zip

Ok I tried it with rumrunner universal, but it says: "looks like device is not rooted AND lacks an unsecure kernel. su or FU!!!"
But it is rooted oO any idea?
Thanks
EDIT: I tried it again with my stock rom, but it didn't work either. It said i should flash another kernel, or another rom and retry.

umbertoftw said:
Ok I tried it with rumrunner universal, but it says: "looks like device is not rooted AND lacks an unsecure kernel. su or FU!!!"
But it is rooted oO any idea?
Thanks
EDIT: I tried it again with my stock rom, but it didn't work either. It said i should flash another kernel, or another rom and retry.
Click to expand...
Click to collapse
stock rom plus ElementalX is a good combo

okay, I reinstalled ElementalX (in the right version) as stockish as possible, and after many many reboots, and a few prayers and cries it did WORK!!
Thank you very much
What is the next step, because I don't have any stock recovery for my firmware? or a stock kernel..
EDIT: I was searching for RUU to flash, but the weird thing is, that my CID is O2 germany, and my firmware is O2 UK. What should I flash? There is no exact RUU for my CID, or I did not find it..

I'm really clueless how I could get the latest OTA, I don't find any fitting backup or ruu for my phone..
Or is there any other way to get the OTA's?

umbertoftw said:
I'm really clueless how I could get the latest OTA, I don't find any fitting backup or ruu for my phone..
Or is there any other way to get the OTA's?
Click to expand...
Click to collapse
You now have s-off you can convert your phone to international
you need this
MID_Change_1.01.zip
https://www.androidfilehost.com/?fid=23501681358538634
use modelid: PN0710000
and simply change your CID to HTC__001
fastboot oem writecid HTC__001
then use this RUU
http://www.htc1guru.com/dld/ruu_m7_...0-38r-1157-04l_release_353069_signed_2-1-exe/
or here
http://www.androidruu.com/getdownlo...10.38r.1157.04L_release_353069_signed_2-1.exe
you should get OTA, then go back to unlocking your bootloader and Rooting as usual

.

.

omarx5656 said:
So, for the past two days, I have been trying to S-Off my HTC One (M7), and it seems I have never been in luck. There was only my last hope with the Insertcoin gpe ROM, and it just opens, I click next in the setup, shuts down, restarts over and over. Basically bricked my phone, I re-installed my last ROM again. I have tried Revone, firewater, moonshine, and rumrunner. All of them didn't work for me. I'm currently running the AICP 4.4.2 ROM. My bootloader is unlocked, I'm rooted, and my hboot is 1.57.0000. I don't see what is the problem with my device. I am trying to get S-Off so I can convert my One into the gpe edition. If you could tell me step by step, thoroughly on how to get S-Off, or even install Insertcoin with S-Off, I will be very grateful. Thanks in advance. PS. Sorry if I posted this in the wrong section, I'm quite new here.
Click to expand...
Click to collapse
why not try flashing cyanogenmod 11 or my rom, its an older version of my rom but people have reported that firewater works with it, you can download it here

.

omarx5656 said:
Well, it didn't work, but something has changed. Usually, I used to get to bottle 12 and then it tells me to restart and try again. this time, it gets to bottle 2 and tells me to retry. Is there something else I'm supposed to do to get it to work? Thanks for your reply btw.
Click to expand...
Click to collapse
What about rumrunner s-off

.

@omarx5656
Flash bulletproof 14.2 kernel and then firewater step by step and you will get s-off quickly

Diabollon said:
@dd98
Flash bulletproof 14.2 kernel and then firewater step by step and you will get s-off quickly
Click to expand...
Click to collapse
just take the boot.img from the bulletproof.zip file and flash it manually, flashing the zip in recovery wont work

dd98 said:
just take the boot.img from the bulletproof.zip file and flash it manually, flashing the zip in recovery wont work
Click to expand...
Click to collapse
You can use flash image gui app from play store for kernel flash

.

The best way is to use your originally 4.4.2 stock and then flash only bulletproof 14.2 for 4.4.2 roms

omarx5656 said:
Sorry but, do I need to have Sense or GPE in order to install it? Last time I've tried installing that kernel on a custom ROM, it bricked my device. So, I'm guessing I will need Sense, but do I need to be fully stock or can I just install another custom ROM with Sense such as the ViperOne?
Click to expand...
Click to collapse
yes its for sense, im not sure about gpe

.

S-OFF problem

I ran the Rumrunner for S-Off of HTC One M7 International(Indian) version. I am getting the message about insecure kernel. So I searched some insecure kernel and I found out about elementalx kernel. But the kernel had support for only sense based roms and GPE roms. So I flashed that kernel and the GPE lollipop ROM. But then when I connected the device for debugging through ADB I got the message in CMD that the device is offline.( When I typed adb devices). So I couldnt run the rumrunner because of that. So I want to ask if this is a problem of the ROM or there is a problem of the connection because I ran the rumrunner before with the CM12/11(I diidn't know it woudn't work then) and I used to get to the point where all the ADB connections worked fine. I just can't get the device online. I tried everything, kill server start server and what else....Nothing happened. Please help me out here bcz I have been trying this for over a month and failed. I bootloader unlocked and rooted so easily and this s-off is getting my brains off.. So finally plz suggest a combination of roms and kernels which support rumrunner or tell what the problem is with the adb device offline problem.. Thanks in advance..

fastboot getvar all
Without imei and serial number

vasind.jindal said:
I ran the Rumrunner for S-Off of HTC One M7 International(Indian) version. I am getting the message about insecure kernel. So I searched some insecure kernel and I found out about elementalx kernel. But the kernel had support for only sense based roms and GPE roms. So I flashed that kernel and the GPE lollipop ROM. But then when I connected the device for debugging through ADB I got the message in CMD that the device is offline.( When I typed adb devices). So I couldnt run the rumrunner because of that. So I want to ask if this is a problem of the ROM or there is a problem of the connection because I ran the rumrunner before with the CM12/11(I diidn't know it woudn't work then) and I used to get to the point where all the ADB connections worked fine. I just can't get the device online. I tried everything, kill server start server and what else....Nothing happened. Please help me out here bcz I have been trying this for over a month and failed. I bootloader unlocked and rooted so easily and this s-off is getting my brains off.. So finally plz suggest a combination of roms and kernels which support rumrunner or tell what the problem is with the adb device offline problem.. Thanks in advance..
Click to expand...
Click to collapse
rumrunner only works on hboot 1.54 and lower, if your hboot 1.56 or greater you have to use Sunshine s-off ...it's $25

So there is only 1 way to s off (sunshine)? My hboot version is 1.57 No free options?

vasind.jindal said:
So there is only 1 way to s off (sunshine)? My hboot version is 1.57 No free options?
Click to expand...
Click to collapse
Nope, they destroyed many expensive phones creating sunshine in order to give us s-off, and at $500 + per phone, a $25 charge is nothing, but worth $1,000,000

Seanie280672 said:
Nope, they destroyed many expensive phones creating sunshine in order to give us s-off, and at $500 + per phone, a $25 charge is nothing, but worth $1,000,000
Click to expand...
Click to collapse
Yeah its fair. Thanks a lot.

SunChine
vasind.jindal said:
So there is only 1 way to s off (sunshine)? My hboot version is 1.57 No free options?
Click to expand...
Click to collapse
I Have HTC One M7, I need S-Off but SunChine say "Your device has a debuggable ramdisk (ro.debuggable=1). You need to Flash a non-debugable boot.img, stock would be best."

caracas63 said:
I Have HTC One M7, I need S-Off but SunChine say "Your device has a debuggable ramdisk (ro.debuggable=1). You need to Flash a non-debugable boot.img, stock would be best."
Click to expand...
Click to collapse
flash the stock kernel. Sunshine need stock rom and kernel.

SunChine S-Off
It is ironic, to change the firmware should I be S-Off, and to be S-Off must change the firmware.

caracas63 said:
It is ironic, to change the firmware should I be S-Off, and to be S-Off must change the firmware.
Click to expand...
Click to collapse
wrong, you can flash the same firmware that you are already on or the next step up only as long as its signed firmware.

and you don't need s-off to flash the kernel part of the firmware.