Hi! I have a Xperia Z on the rom by Rajeev and Hodor kernel with Drm keys mod, unlocked bootloader c6603. I had my phone with 1% batery, i arrive home and the phone was turned off, i holded the power button and red led blinks(this is normal when you have your phone fully discharged) i plugged into my computer fot 5 minutes nothing happened only red led stayed on. I unplug the phone the red led still there, after 5 minutes red led dissapeared. i plugged into the charger and noting happend only red led, i unplugged it and red led is still on. What can i do? adb fastboot not working and volume up +power the same. What is the problem, i'm a little bit scared. Sorry for my english. Thanks.
115dan said:
Hi! I have a Xperia Z on the rom by Rajeev and Hodor kernel with Drm keys mod, unlocked bootloader c6603. I had my phone with 1% batery, i arrive home and the phone was turned off, i holded the power button and red led blinks(this is normal when you have your phone fully discharged) i plugged into my computer fot 5 minutes nothing happened only red led stayed on. I unplug the phone the red led still there, after 5 minutes red led dissapeared. i plugged into the charger and noting happend only red led, i unplugged it and red led is still on. What can i do? adb fastboot not working and volume up +power the same. What is the problem, i'm a little bit scared. Sorry for my english. Thanks.
Click to expand...
Click to collapse
Did you left your phone whilst reinstalling any ROM or flashing anything?
I can suspect that you;ve bricked your device.
You can try to stick POWER BUTTON + VOL. rocker and leave it for entire night. I have read that some had fixed this issue by the way which I'm writing now, but I'm not sure if it will work to you.
You can even leave your phone connected to charger for some while.
If it will not work either - I have seen some where in this forum thread in which were specified how to unbrick XZ with disassemblying it
LaurynasVP said:
Did you left your phone whilst reinstalling any ROM or flashing anything?
I can suspect that you;ve bricked your device.
You can try to stick POWER BUTTON + VOL. rocker and leave it for entire night. I have read that some had fixed this issue by the way which I'm writing now, but I'm not sure if it will work to you.
You can even leave your phone connected to charger for some while.
If it will not work either - I have seen some where in this forum thread in which were specified how to unbrick XZ with disassemblying it
Click to expand...
Click to collapse
I managed to get it running now wi fi mobile data doesn't work, and power button works to lock the screen but doesn't work to wake. I'm flashing .292 via flashtool, i hope all my problems will be solved. Before they worked very well.
Related
Hi everyone.
My SP doesn't want to turn on anymore for a unknown reason. When plugging it to the pc\charger the red led appears and then disappears. Non of the tips (power + vol. plus, power + vol. minus) doesn't work.
Please, help. If your suggestion will help, I'll pay you.
put it into charger and leave it charging for like 1-2 hours, also remove sim and sd card
tr0llica said:
put it into charger and leave it charging for like 1-2 hours, also remove sim and sd card
Click to expand...
Click to collapse
It was on the charger all night long (with no sim and sd) and nothing. But now there is no red light.
Take it back to the shop
Sent from my C5303 using Tapatalk 4 Beta
are u setup driver for your computer to connect with phone
technaudio said:
Take it back to the shop
Click to expand...
Click to collapse
Not for me, unfortunately.
seper123 said:
are u setup driver for your computer to connect with phone
Click to expand...
Click to collapse
nope, because PC see nothing - nothing happens when plug in.
setup driver for flashtool in flashtool/driver remember to tick all
did it work??
How Did This Happen
suvalex said:
Hi everyone.
My SP doesn't want to turn on anymore for a unknown reason. When plugging it to the pc\charger the red led appears and then disappears. Non of the tips (power + vol. plus, power + vol. minus) doesn't work.
Please, help. If your suggestion will help, I'll pay you.
Click to expand...
Click to collapse
How did this happen?? Try this pull out the back panel and press the reset button with a pin and hold the power button and see what happens
Also you may try this install Sony PC companion This will install all the correct drivers for the phone then take usb cord Holding volume Down And Plug it to the phone. If all goes well the led at the bottom should glow green
I had a similar issue and after 4 days of trying all what i could find out in XDA for bricked Xperia phones my SP is back alive.
For me it happened during flashing (with Flashtool 0.9.11) the stock firmware .257 with to less battery power.
Short Info to my phone when it happened
Sony Xperia SP C5303
Kernel: Dooms v01 (i do not think that this was the problem!)
Bootloader: unlocked
Stock firmware from C5302 version .284
System: deodexed and rooted
When i say flashing i did it always with flashtool because PC Companion and SUS did not recognize my phone at all (with locked bootloader).
My SP was behaving as following.
- When i put the wall charger on the phone nothing happened no lights nothing same if plugged in to the computer.
- If i pressed the power button unconnected the LED flashed red 3 times all the time,
after a while nothing happened anymore (which gave me the indication that the battery is completely empty)
- If i pressed the power button continuous during charging (wall/computer) the red light turned on until i released the power button.
When pressing the Power button long enough during i was connected to the computer the green light turned on and i was in flash mode.
But only for maximum 2 min. This was enough to flash all firmware parts except the system.sin (at ~80 % phone disconnected).
And this was the problem my SP stayed dead.
Before someone asks, standard connecting while pressing the volume down for flash mode or volume up for fastboot mode didn't work.
Now i tryed all:
- Left the phone on the wall charger without doing anything -> nothing
- Left the phone on the computer without doing anything -> nothing
- Left the phone on the wall charger/computer while pressing the power button continuous (did it with a tape) -> nothing except that it went in flash mode and red light again all the time
Now my last try (i was reading this in an X10 thread):
I plugged the phone more than 7 hours to the computer while pressing the volume down button continuously (again taped).
Next morning it first looked like that this also did not work.
But as i disconnected the phone from the computer and plugged in again the red light stayed on.
Ok give it a try i thought and i put the phone to my wall charger for 1 hour or so also here the red light was glowing continuous now.
And yeah i could connect the phone to the computer in the normal way volume down than usb and i was in flash mode.
I was now able to flash the complete stock firmware. After again putting the phone to the wall charger for 1 hour the system was booting :victory: .
And now i saw the problem battery charge in status bar showed 1 % but the firmware start up check showed 55 % .
I remember that i did wipe the battery stats in recovery before all that happened.
No idea if this caused the problem.
However i could now charge my phone and it is still alive relocked and on stock.
Hope this helped and good luck.
To prevent other people from this bad situation i tried to remember exactly what caused the drain of the battery to 0%.
Battery was on 25% at start. (I know this was stupid, i was too impatient as dooms v16 and cwm for locked bootloaders were released :silly
1.I started with trying to update my mobile to stock with PC Companion and SUS,
without thinking about that this will not work with unlocked bootloader. -> first battery drain
2. Got stock FTF for .257 (c5303) and wanted to flash it which did not work got errors always.
My SP was connected flashmode on my notebook a long time while i was trying to fix that (reading XDA, driver config etc).
Several times tried to flash without success.
-> drain, drain and more battery drain not thinking about that i started with only 25%.
3. Gave up on my notebook and connected my phone to the Desktop PC (here the config was ok i knew that from flashing before on that computer).
Meanwhile i assume that my battery was already close to completely empty.
As the flash of the FTF (all parts) started my phone turned off and was "dead", i do not remember on which sin it turned off.
The whole time 1. 2. 3. i never booted i always stayed disconnected or in flashmode.
And than the mess began which i posted in my previous post.
So my SP is officially dead. Need to replace to motherboard.
THIS HAPPEND TO ME TRY PRESSING THE BUTTON BEHIND THE PANEL
WORKED FOR ME
Sent from my C5303 using xda app-developers app
ykdr-scott said:
THIS HAPPEND TO ME TRY PRESSING THE BUTTON BEHIND THE PANEL
WORKED FOR ME
Sent from my C5303 using xda app-developers app
Click to expand...
Click to collapse
lucky for you,dude...it does'nt work on mine..
anyway,how long you keep presing the button?
Chena_22 said:
lucky for you,dude...it does'nt work on mine..
anyway,how long you keep presing the button?
Click to expand...
Click to collapse
You should keep pressing that button till your phone's screen goes black and vibrates 3 times if it doesn't do that then either the mobo is dead or the button is broken!
well... that's why I kinda hate sony why not do like most makes do (Like iphone, htc, samsung etc just long press the power button to reset the damn thing! It gets really annoying to keep pulling my case and back cover off and then putting a pencil in that tiny hole in public :/)
noahvt said:
You should keep pressing that button till your phone's screen goes black and vibrates 3 times if it doesn't do that then either the mobo is dead or the button is broken!
well... that's why I kinda hate sony why not do like most makes do (Like iphone, htc, samsung etc just long press the power button to reset the damn thing! It gets really annoying to keep pulling my case and back cover off and then putting a pencil in that tiny hole in public :/)
Click to expand...
Click to collapse
well that's a shame for sony then....
but,my xsp is already dead now...even i try hard to revive it....
Please let me know!!
Ehardt said:
I had a similar issue and after 4 days of trying all what i could find out in XDA for bricked Xperia phones my SP is back alive.
For me it happened during flashing (with Flashtool 0.9.11) the stock firmware .257 with to less battery power.
Short Info to my phone when it happened
Sony Xperia SP C5303
Kernel: Dooms v01 (i do not think that this was the problem!)
Bootloader: unlocked
Stock firmware from C5302 version .284
System: deodexed and rooted
When i say flashing i did it always with flashtool because PC Companion and SUS did not recognize my phone at all (with locked bootloader).
My SP was behaving as following.
- When i put the wall charger on the phone nothing happened no lights nothing same if plugged in to the computer.
- If i pressed the power button unconnected the LED flashed red 3 times all the time,
after a while nothing happened anymore (which gave me the indication that the battery is completely empty)
- If i pressed the power button continuous during charging (wall/computer) the red light turned on until i released the power button.
When pressing the Power button long enough during i was connected to the computer the green light turned on and i was in flash mode.
But only for maximum 2 min. This was enough to flash all firmware parts except the system.sin (at ~80 % phone disconnected).
And this was the problem my SP stayed dead.
Before someone asks, standard connecting while pressing the volume down for flash mode or volume up for fastboot mode didn't work.
Now i tryed all:
- Left the phone on the wall charger without doing anything -> nothing
- Left the phone on the computer without doing anything -> nothing
- Left the phone on the wall charger/computer while pressing the power button continuous (did it with a tape) -> nothing except that it went in flash mode and red light again all the time
Now my last try (i was reading this in an X10 thread):
I plugged the phone more than 7 hours to the computer while pressing the volume down button continuously (again taped).
Next morning it first looked like that this also did not work.
But as i disconnected the phone from the computer and plugged in again the red light stayed on.
Ok give it a try i thought and i put the phone to my wall charger for 1 hour or so also here the red light was glowing continuous now.
And yeah i could connect the phone to the computer in the normal way volume down than usb and i was in flash mode.
I was now able to flash the complete stock firmware. After again putting the phone to the wall charger for 1 hour the system was booting :victory: .
And now i saw the problem battery charge in status bar showed 1 % but the firmware start up check showed 55 % .
I remember that i did wipe the battery stats in recovery before all that happened.
No idea if this caused the problem.
However i could now charge my phone and it is still alive relocked and on stock.
Hope this helped and good luck.
Click to expand...
Click to collapse
What is those time period for doing anything nothing?|||???? please mention about times....for each:
- How many Time........You.....Left the phone on the wall charger without doing anything -> nothing>??
- How many Time........You.....Left the phone on the computer without doing anything -> nothing?>?
- How many Time........You.....Left the phone on the wall charger/computer while pressing the power button continuous (did it with a tape) -> nothing except that it went in flash mode and red light again all the time>??>?
also
Now my last try (i was reading this in an X10 thread):
I plugged the phone more than 7 hours to the computer while pressing the volume down button continuously (again taped).
(WITH FLASHTOOL READY WITH .TFT KERNEL FILE)>>>????
Next morning it first looked like that this also did not work.
But as i disconnected the phone from the computer and plugged in again the red light stayed on. (WITH FLASHTOOL READY WITH KERNEL TFT FILE)>>>????
Ok give it a try i thought and i put the phone to my wall charger for 1 hour or so also here the red light was glowing continuous now.
thnx
please let me know, mate!!
watch?v=daNue2RsUbY ( video of my phone with the fading logo )
had the same problem with mines ( i manage to record this fading logo part )
hours later after the record my phone won't even turn on and it only shows that red light popping up when i press the power button
i brought it to sony's service center here and they replaced the battery, that managed to fix it <3
For me pressing the back off button and volume + button force it to fastboot mode. From there just flash a kernel and it is fixed.
which kernel???
Hello Guys.I really hope that there is among you who can solve my problem.
My phone: Sony Xperia T (lt30p)
The battery is empty. Power button does not respond to there was no red light.
I started charge a few minutes and lighted in red yeee but after a few minutes does not light up and start all over again. why ?
I tried to hold down the power button did not work. Also power button and volume up button is also the case.
How can you get to recharge the battery?
Thanks and sorry my poor English.
Crema92 said:
Hello Guys.I really hope that there is among you who can solve my problem.
My phone: Sony Xperia T (lt30p)
The battery is empty. Power button does not respond to there was no red light.
I started charge a few minutes and lighted in red yeee but after a few minutes does not light up and start all over again. why ?
I tried to hold down the power button did not work. Also power button and volume up button is also the case.
How can you get to recharge the battery?
Thanks and sorry my poor English.
Click to expand...
Click to collapse
I found this for you in another post talk.sonymobile.com/t5/Xperia...y/td-p/279854/. Sry i can't paste links
Charge overnight or up to 24hrs and then try to turn on again. This has been reported often.
Sent from my LT30p using xda app-developers app
But i have a similar problem to the stated one. After flashing the new leaked 4.3 Rom from DoomLord my phone ran just fine for nearly a week. Yesterday i inserted a new sd card and wanted to format it in recovery. But then after formating sdcard1 my phone totally freezed. However i rebooted it from recovery. No led when i plug in. I tried every combination of buttons presses (also volume up + power button which does normaly the trick). I even opened the phone and unplugged battery for 2-3 min, still nothing. Do you guys have any idea what i else can do, or is my phone simply broken?
IceTtum said:
But i have a similar problem to the stated one. After flashing the new leaked 4.3 Rom from DoomLord my phone ran just fine for nearly a week. Yesterday i inserted a new sd card and wanted to format it in recovery. But then after formating sdcard1 my phone totally freezed. However i rebooted it from recovery. No led when i plug in. I tried every combination of buttons presses (also volume up + power button which does normaly the trick). I even opened the phone and unplugged battery for 2-3 min, still nothing. Do you guys have any idea what i else can do, or is my phone simply broken?
Click to expand...
Click to collapse
charage the phone for 24 hrs or overnight and try flashing the stock rom via flashtool. if it did not work with vol down button+power try this method 2
try to do a hard reset; (while NOT connected via usb or something) hold power+vol up, it will vibrate 1 time, and then 3 times quick. After that try to connect the usb (NOT while pressing any buttons) and press vol down+power
That should connect it into flashmode.
nipadog and
romeoofair said:
charage the phone for 24 hrs or overnight and try flashing the stock rom via flashtool. if it did not work with vol down button+power try this method 2
try to do a hard reset; (while NOT connected via usb or something) hold power+vol up, it will vibrate 1 time, and then 3 times quick. After that try to connect the usb (NOT while pressing any buttons) and press vol down+power
That should connect it into flashmode.
Click to expand...
Click to collapse
Thank you for your reply.
Unfortunately this didn't work. However after letting the phone charging for a while i got a red LED. Which disappears every 5 min and comes again after another 5. When i disconnect phone from charger and connect to my notebook nothing happens. I mean I press vol down + power there is nothing the phone doesn't react. If i try i hard reset. The red LED is blinking and the phone doesn't vibrate .
IceTtum said:
Thank you for your reply.
Unfortunately this didn't work. However after letting the phone charging for a while i got a red LED. Which disappears every 5 min and comes again after another 5. When i disconnect phone from charger and connect to my notebook nothing happens. I mean I press vol down + power there is nothing the phone doesn't react. If i try i hard reset. The red LED is blinking and the phone doesn't vibrate .
Click to expand...
Click to collapse
check with the other guys bro. i dont think its a hardware issue
Maybe ur battery just tried...u shud try it wid some other battery to see if it's the battery's fault or not..
Sent from my GT-S7562 using XDA Premium 4 mobile app
Ok, I disassembled the phone again. I removed battery and measured voltage seems to be fine. Besides battery life was OK when it worked (OK compared to my SXplay ). Additionally i tried the battery trick from this post http://forum.xda-developers.com/showthread.php?t=2449242. However the bahavior on charger is still the same 5min red LED 5min no LED at all. Excluding it is a driver problem I ran flashtool on my linux machine and tested both the windows and linux flash tool with my xperia Play which is correctly detected in flash mode.
Thanks guys for your hints upon now but I would be happy to get additonal ones. I'm not afraid of disassembling and getting my hands dirty.
I hope I will get this great phone running again since I've really started to love it :-/.
Same situation with CM 10.2
Hi there I'm in the same situation with my xperia V.
Bootlocker unlock and flashed 10.2.0 (latest stable rel) and gapp. No issue everything was working but huge battery drain due to Media Scanner, so I've reboot in recovery wipe the cache and format the external sd then reboot all from the recovery menu.....then the phone is dead.
now in change since more that 30 hours and get red light for some minutes that nothing at all....nothing pushing power, nothing pushing volume nothing at all.....if i connect without battery to the power red light blinks.
how is that possible???? at least recovery node should work...is that an HW problem? but how can i have created an HW problem with a wipe a format and a reboot????
Please help...
Thanks in advance.
IceTtum said:
Ok, I disassembled the phone again. I removed battery and measured voltage seems to be fine. Besides battery life was OK when it worked (OK compared to my SXplay ). Additionally i tried the battery trick from this post http://forum.xda-developers.com/showthread.php?t=2449242. However the bahavior on charger is still the same 5min red LED 5min no LED at all. Excluding it is a driver problem I ran flashtool on my linux machine and tested both the windows and linux flash tool with my xperia Play which is correctly detected in flash mode.
Thanks guys for your hints upon now but I would be happy to get additonal ones. I'm not afraid of disassembling and getting my hands dirty.
I hope I will get this great phone running again since I've really started to love it :-/.
Click to expand...
Click to collapse
How much voltage is the battery? For that battery trick, are you sure, you did it correctly? Could you post some pictures? If you're sure, it's the battery, buy another one.
IceTtum said:
I found this for you in another post talk.sonymobile.com/t5/Xperia...y/td-p/279854/. Sry i can't paste links
Click to expand...
Click to collapse
Mad Marty said:
Charge overnight or up to 24hrs and then try to turn on again. This has been reported often.
Sent from my LT30p using xda app-developers app
Click to expand...
Click to collapse
more than a week trying. I tried almost everything but does not work just the power button blinking red light, Lights up for a few minutes and lights down few minutes -.- Please help me !!
peetr_ said:
How much voltage is the battery? For that battery trick, are you sure, you did it correctly? Could you post some pictures? If you're sure, it's the battery, buy another one.
Click to expand...
Click to collapse
Ok i attached a picture. The measured voltage is 3.07 V between kathode and anode marked in red (of course I measured it when the battery was disconnected. Moreover you see the soldered connection to the back of the battery marked in green. I've already tried what I red in another post in this forum, where the guys there suggest to unplugg the battery and try to connect the phone in flash mode. This results in a blinking red LED :-/. No idea what else I can do
IceTtum said:
Ok i attached a picture. The measured voltage is 3.07 V between kathode and anode marked in red (of course I measured it when the battery was disconnected. Moreover you see the soldered connection to the back of the battery marked in green. I've already tried what I red in another post in this forum, where the guys there suggest to unplugg the battery and try to connect the phone in flash mode. This results in a blinking red LED :-/. No idea what else I can do
Click to expand...
Click to collapse
Charge the battery somewhere or buy new battery. 3.07V is not enough.
Battery Voltage
peetr_ is right, using GPS Essentials to measure my battery voltage at 12% charge (not the most accurate way I know) it's measuring at 3.611V
Pushing power button red light blinks
stilicone said:
Hi there I'm in the same situation with my xperia V.
Bootlocker unlock and flashed 10.2.0 (latest stable rel) and gapp. No issue everything was working but huge battery drain due to Media Scanner, so I've reboot in recovery wipe the cache and format the external sd then reboot all from the recovery menu.....then the phone is dead.
now in change since more that 30 hours and get red light for some minutes that nothing at all....nothing pushing power, nothing pushing volume nothing at all.....if i connect without battery to the power red light blinks.
how is that possible???? at least recovery node should work...is that an HW problem? but how can i have created an HW problem with a wipe a format and a reboot????
Please help...
Thanks in advance.
Click to expand...
Click to collapse
situation now, more than 30h of charging, is changed a little now if a push the power button the red light blinks but no reboot no vibration nothing at all.......is it worth to try another battery?
please provide me some guidance.
BR
Yes, it's worth to try it. Just try to borrow it from someone, let it boot and try to use your battery again.
no way even changing the battery
peetr_ said:
Yes, it's worth to try it. Just try to borrow it from someone, let it boot and try to use your battery again.
Click to expand...
Click to collapse
No way even with a new battery
Really? Neither flash mode?
xperia t now alive
hello guys I have a solution to this problem.and I guess you guys are lucky cause I experienced this problem also.you don't need to panic cause this will help.all you need to do is to get a new battery either online or in your domestic regions.if you wish to get it online go to aliexpress.com And it will be shipped to you no matter where you are on this earth.the reason is because the xperia t has been drained to the core and so it can't come on in other to flash in a kernel or image. When you've bought the battery you can actually fix it by yourself cause I'll Show you how.when you've fixed it then you flash in 4.3jb stock room in it and then your phone comes back alive like mine.IV actually used the phone for a month before that problem occurred but now say no more to that cause this thread will work 100%
---------- Post added at 12:33 AM ---------- Previous post was at 12:08 AM ----------
Crema92 said:
Hello Guys.I really hope that there is among you who can solve my problem.
My phone: Sony Xperia T (lt30p)
The battery is empty. Power button does not respond to there was no red light.
I started charge a few minutes and lighted in red yeee but after a few minutes does not light up and start all over again. why ?
I tried to hold down the power button did not work. Also power button and volume up button is also the case.
How can you get to recharge the battery?
Thanks and sorry my poor English.
Click to expand...
Click to collapse
hello guys I have a solution to this problem.and I guess you guys are lucky cause I experienced this problem also.you don't need to panic cause this will help.all you need to do is to get a new battery either online or in your domestic regions.if you wish to get it online go to aliexpress.com And it will be shipped to you no matter where you are on this earth.the reason is because the xperia t has been drained to the core and so it can't come on in other to flash in a kernel or image. When you've bought the battery you can actually fix it by yourself cause I'll Show you how.when you've fixed it then you flash in 4.3jb stock room in it and then your phone comes back alive like mine.IV actually used the phone for a month before that problem occurred but now say no more to that cause this thread will work 100%
Hi everyone!
4 days ago i washed my phone for about 10 seconds, phone worked normally. After 1 hour i saw water went into both front and back camera. I got out all flaps and after some hours cameras were functional again. After even more hours buttons started to act weird. Sometimes power button wasn't working, sometimes volume up was acting like power button and so on. I tried to restart the phone, sometimes it went into safe mode(probably volume button was pressed by itself). Finally I couldn't start the phone at all(perhaps the power button stopped working at all).
After that i calmed down and put my phone into rice(hoping that would absorb water if any). After 24 hours i had no luck. When i had connected my phone to computer, the led was red, phone vibrated 3 times and then again and again.
Next step was to open the phone( removing the back with a hairdryer), took out the battery and trying to dry the phone with hairdryer. Still no succes. When connecting to PC and start flashtool, my phone wasn't recognised. I installed Sony Update Service (SUS) and then when i connected my phone i heard that sound you often hear when connecting a new device to an USB port. Now my phone is seen by flashtool, but it's always in fastbootmode. I even flashed CWM and it worked.
The problem is that it seems volume up is pressed always so i can't enter in flashmode to flash 4.4.2, it always goes into fastboot.
When on battery the phone is dead at all. Still when i try to charge the phone, it starts, displays Sony logo then shows that it's charging (at first that battery was empty but after 2 hours it got full charged). If i press power button it shutdown.
To resume, when on battery nothing happens( the battery could be dead). When plugged to wall charger the phone starts charging( so battery could work). Power button does nothing at all when on battery, but works when phone is charging or when connected to PC in fastboot.
If anyone had any idea what I could do I would be very appreciative. If you have any questions don't hesitate to ask me.Thank you very much for your support!
bavarezul13 said:
Hi everyone!
4 days ago i washed my phone for about 10 seconds, phone worked normally. After 1 hour i saw water went into both front and back camera. I got out all flaps and after some hours cameras were functional again. After even more hours buttons started to act weird. Sometimes power button wasn't working, sometimes volume up was acting like power button and so on. I tried to restart the phone, sometimes it went into safe mode(probably volume button was pressed by itself). Finally I couldn't start the phone at all(perhaps the power button stopped working at all).
After that i calmed down and put my phone into rice(hoping that would absorb water if any). After 24 hours i had no luck. When i had connected my phone to computer, the led was red, phone vibrated 3 times and then again and again.
Next step was to open the phone( removing the back with a hairdryer), took out the battery and trying to dry the phone with hairdryer. Still no succes. When connecting to PC and start flashtool, my phone wasn't recognised. I installed Sony Update Service (SUS) and then when i connected my phone i heard that sound you often hear when connecting a new device to an USB port. Now my phone is seen by flashtool, but it's always in fastbootmode. I even flashed CWM and it worked.
The problem is that it seems volume up is pressed always so i can't enter in flashmode to flash 4.4.2, it always goes into fastboot.
When on battery the phone is dead at all. Still when i try to charge the phone, it starts, displays Sony logo then shows that it's charging (at first that battery was empty but after 2 hours it got full charged). If i press power button it shutdown.
To resume, when on battery nothing happens( the battery could be dead). When plugged to wall charger the phone starts charging( so battery could work). Power button does nothing at all when on battery, but works when phone is charging or when connected to PC in fastboot.
If anyone had any idea what I could do I would be very appreciative. If you have any questions don't hesitate to ask me.Thank you very much for your support!
Click to expand...
Click to collapse
Did you connect phone holding volume down key or are you connecting usb after that pressing volume down key
androidtweaker1 said:
Did you connect phone holding volume down key or are you connecting usb after that pressing volume down key
Click to expand...
Click to collapse
Even if i down't press anything, just connect the phone to usb, led is blue, that means it's in fastboot mode...so i think volume up is stuck, pressed.
bavarezul13 said:
Even if i down't press anything, just connect the phone to usb, led is blue, that means it's in fastboot mode...so i think volume up is stuck, pressed.
Click to expand...
Click to collapse
or the volume pcb might have shorted
Please remember this for the rest of your life:
When you notice that water has went into your device.... TURN IT THE F OFF AND LET TIT DRY...
Using it while it's wet from the inside is really bad.
Update Guys
Today I've replaced that yellow connector that contains power, vol up and vol down buttons. I managed to enter flashmode and flashed the newest official rom .233. Power button and vol up work like charm, vol down is dead.
The problem is that my phone is stuck on safe mode(probably because vol down is stuck). I want to know if there's any solution to get rid of this safe mode. I read somewhere that changes can be made to the kernel so that vol down will be disabled for ever. If you know any ROM, any mod, whatever that disables the vol down button i'll appreciate your help.
Hello, my xperia z bricked suddenly while I was gonna flash a stock rom with flashtool (I used flashtool many times before). I just turned off my phone and then prepared flashtool to flash stock rom (kitkat). When flashtool said to connect the phone in flashmode, I just press the volume down button (while turned off) and connect the phone with pc. But nothing happens then. Phone doesn't response. Pc/flashtool couldn't detect my phone and also my phone doesn't response. No led light, no vibrations (holding volume up+power button for 5/10 seconds), no led indicator while charging. Nothing. Just died suddenly :crying:
Then I dissembled my phone and disconnected the battery connector from motherboard. Then I connected it again and plugged my phone to wall charger and charge my phone (no led light appeared that time while charging, phone just heated up) around 20+ hours. After that I got a red led light whenever I plug my phone into pc or wall charger. But the red led turns off after around 30 seconds. From then, whenever I connect the phone to wall charger or pc, red led appears and after around 30/60 seconds, it disappears again. I don't understand what does that mean So,
1. is it hard bricked or soft bricked?
2. is there really any chance to fix that problem by myself? I unlocked bootloader so there is no chance that sony will fix that 'brick' phone.
Any help will be highly appreciated.
Thanks guys.
You can try s1tool to flash your Bootloader.... Search the forum, u can follow the tutorial.... There might be a hope
Sent from my C6602 using xda app-developers app
just try to have the usb cable conected to your pc and hold the power button and volume up till it makes a vibration ,and then hold volume down even if it does not vibrate it should still conect to flashtools .
Hi
I am stuck with a phone that won't boot, charge, or be detected by flashtool (or windows) and will not boot in flashmode/fastboot either.
I had plugged in the phone for charging when the battery was considerably low ~ 5-10% before I went to sleep. I remember the red LED glowing, meaning the phone must've been charging.
The next morning I check the phone, the LED was STILL red and the handset was kind of dead - no response at all, whatsoever. Even the reset button on the bacl panel doesn't work (no vibration).
The phone was running BlissPop (5.1.1) with Tangerine kernel.
Now when I plug in the phone for charging, nothing happens at all, not even the red LED. The LED does glow red for as long as I press and hold the power button while it is plugged in (both PC and wall outlet)
I took it to the service center; they say they'll have to change the motherboard. Obviously the phone is not in warranty and there is no way I can pay 10,000 INR that Sony is demanding for the job.
Someone somewhere in the forums suggested allowing the battery to drain completely, but I don't think my battery is holding any charge.
Can anyone help me out?
Thanks
msainani said:
Hi
Can anyone help me out?
Thanks
Click to expand...
Click to collapse
1. Press and hold the reset button for 8 seconds and check if it vibrates. Now plug in charger as there is a possibility that phone is not booting because of insufficient charge.
2. Charge for atleast 20 min without switching on phone.
3. Make sure flashtool is installed properly and so as drivers.
4. Flash Stock ftf
If the above didnt work then try Fastboot mode and simply flash Tangerine kernel.
If nothing works, then its an hardware issue and there is no point in spending 10k in repairing.
Get yourself a brand new Moto G or yureka.
http://forum.xda-developers.com/showthread.php?t=2717303 <- this guy had a pretty similar problem and managed to fix it
I was following the steps he provided: i plugged the phone to PC and held the power button pressed. Surprisingly the PC did recognize the phone after a while- but it was only momentarily and the red LED also stopped glowing. Unfortunately I haven't been able to reproduce a similar situation after that.
bump!