Unofficial OctOs 5.0.2 - Motorola Droid 4

Please use this thread for bug reports and for sharing ideas on development.
Post all question about how to install rom, safestrap, rooting... in Q&A/T [Rom] Unofficial OctOs 5.0.2 [Droid 4] thread -sd_shadow
Please before posting read the first few posts by sd_shadow and I. You'll see screenshots, bugs, etc.. post #7 will show newest build and any additional info that is needed.
Features:
All CM12 features
Fast
Awesome
Stable (can vary depending on device source changes)
Omniswitch from Omni ROM
Tentacles (hidden inside of about phone under build date)
Supersu used for root management (still needs to be flashed for now)
App circle side bar
A slightly modified OMAP4-common kernel to help performance
Other under the hood things that you don't visually notice
Things will be added as things progress because OctOs is under constant development and improvement
Downloads:
The ROM is on my Gdrive.
I recommend PA Gapps.
Install:
Flash on a NEW slot on the new SELINUX enabled SafeStrap by @stargo to eliminate any bugs of flashing on top of old slots.
Superuser:
Rom is Rooted but it's limited, so installing SuperSU Flashable in Safestrap/TWRP is recommended
Install current SuperSu flashable zip (UPDATE-SuperSU-v2.45.zip - 28 Jan 2015) -sd_shadow
Updates:
Dump system and caches and flash....if you get lots of force closures, wipe data. I suggest wiping data because Lollipop is in early development.
Sources:
Kernel
Big thanks to @stargo for making Lollipop happen for the OMAP4 board!! Without his awesome work I wouldn't have had a decent device tree to use.
XDA:DevDB Information
Oct-L, ROM for the Motorola Droid 4
Contributors
Oggie7797, sd_shadow
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.0.x
ROM Firmware Required: New SafeStrap by Stargo
Based On: Cyanogenmod12
Version Information
Status: Beta
Beta Release Date: 1969-12-31
Created 2015-01-14
Last Updated 2015-02-04

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Bug Report
Bug Reports
Please use SysLog to copy system logs and include logs with any bug reports
What Works: Should be the same as CM12
CDMA
LTE
SMS
Bluetooth Tethering
USB Tethering
Physical Keyboard
Hotspot/Wifi Tethering
Install on any slot including Stock
Does Not Work: Should be the same as CM12
Bugs:
Unknown:
GSM

Installing/Upgrading Safestrap 3.75 and Installing Rom Video
see [Video] Installing/Upgrading Safestrap 3.75 and Installing a Lollypop Rom
Installing/Upgrading Safestrap 3.75:
You need a new recovery supporting SELinux Thanks to @stargo original posted here
An updated Safestrap (3.75) which supports SELinux can be found here: http://droid.cs.fau.de/Safestrap/ (Safestrap-debug.apk)
Please read the README on how to install this version and follow the order of the steps in it: http://droid.cs.fau.de/Safestrap/README.txt
In Safestrap/TWRP recovery
Create a new Rom slot in TWRP
System partition min: 700MB
Data partition: Your Choice
Cache partition: 300MB recommended
Files
PA 5.0 Gapps Page http://goo.gl/YqxI52
Rom mirrors XDA - Drive
Verify Md5 Checksums for all files using a Checksum Utility see https://sites.google.com/site/sdshadowscollection/home/hash-checksums
Root
Rom is Rooted but if you have issues, Install current SuperSu flashable zip (BETA-SuperSU-v2.44.zip - 15 Jan 2015)

Screenshots
04 Feb 2015
(OLD)

New Build: OCT-L-UNOFFICIAL-20150119-0556-maserati-1.zip
Do not install over old rom, delete rom slot, create new slot, install Rom, gapps, and superSU.zip
Changelog:
Wifi Tether working

downloading now and will start testing soon thank you will leave feed back also and thanks again u rock:good:

ok so first i need to say super smooth and speedy better then 4.4 roms bad signal on first boot after but fix in setting works smooth, great rom so far my choice for #1 rom on the droid 4 thanx :good::angel::good::angel::good::angel::good:

nowseewhatudid said:
ok so first i need to say super smooth and speedy better then 4.4 roms bad signal on first boot after but fix in setting works smooth, great rom so far my choice for #1 rom on the droid 4 thanx :good::angel::good::angel::good::angel::good:
Click to expand...
Click to collapse
Thanks I ordered me a d4 so whenever I get that I'll be able to test more extensively. I aim to build again tomorrow and hopefully the fixes by stargo and joojoobee666 will fix the keyboard landscape issue and 4g issue (which is a OMAP4-common bug currently)
Sent from my XT875 using XDA Free mobile app

Oggie7797 said:
Thanks I ordered me a d4 so whenever I get that I'll be able to test more extensively. I aim to build again tomorrow and hopefully the fixes by stargo and joojoobee666 will fix the keyboard landscape issue and 4g issue (which is a OMAP4-common bug currently)
Sent from my XT875 using XDA Free mobile app
Click to expand...
Click to collapse
cant lie i love this rom so far so keep it up and i will follow u bro :victory:
oh if i can help anytime i will put my phone on the line to help

nowseewhatudid said:
cant lie i love this rom so far so keep it up and i will follow u bro :victory:
oh if i can help anytime i will put my phone on the line to help
Click to expand...
Click to collapse
Thanks! I'm using an older 1-12 build for targa as a daily because newer builds fail due to chromium issues...I don't have issues for the other OMAP4 devices..anyway, enjoy the ROM and I'll try to update as soon as I get a chance. Just remember to either install on new slots or to wipe data for new builds. New slots may not be required, but for some reason that really helps to fix issues on targa.
Sent from my XT875 using XDA Free mobile app

ok so i notice data problems my data comes n goes with reboots but i still get texts but no calls or data ive added my own apn messed within the seettings but still having that type of issue with the other cm12 rom but still like this rom

nowseewhatudid said:
ok so i notice data problems my data comes n goes with reboots but i still get texts but no calls or data ive added my own apn messed within the seettings but still having that type of issue with the other cm12 rom but still like this rom
Click to expand...
Click to collapse
Yea data problems on reboot is a known issue and an OMAP4-common issue. Stargo and joojoobee666 will hopefully fix it soon
To fix just go into settings and fiddle with preferred network.
Sent from my XT875 using XDA Free mobile app

New build up on my Gdrive. Lots of changes as far as framework and settings on OctOs side of things, and then all of the CM12 device tree changes by stargo and joojoobee666 so I would love some feedback!

OCT-L-UNOFFICIAL-20150128-0747-maserati.zip
MD5: ee8df1c714c1b8427af5ff544e22d909
XDA Mirror
---------- Post added at 11:48 PM ---------- Previous post was at 11:23 PM ----------
added to OP: current SuperSu flashable zip (UPDATE-SuperSU-v2.45.zip - 28 Jan 2015)

Finally, now I can test my own builds before shipping them for you to test @sd_shadow lol this is much faster and way more stable than on my bionic.
Sent from my XT875 using XDA Free mobile app

Stargo has released a more official safestrap
Safestrap-maserati-v3.75.apk (31-Jan-2015 )
if you installed the debugged version likely do not need to upgrade, but if you have 3.74 or lower use Safestrap-maserati-v3.75.apk (or newer)
follow the readme.txt instructions on the download site

2-04 is now up on both my gdrive and xda, lots commits were synced so if you have issues please clean flash. I would really like some feedback because I see people downloading this.

I've been using the version based on 01/28 since...er, the 28th. The only issues noted other than CM12's usual:
Tentacles > Voice wakeup > Retrain your voice causes a Settings crash
Tentacles > SuperSU causes a Settings crash
Display > Daydreams > Light Grid > Settings causes a Settings crash
As far as general feedback goes, I was a little annoyed to find that most if not all the normal baked-in CM sounds had been replaced, rather than supplemented.

Related

Omnirom / CM / AOKP 4.4.4 on Mini2 [FINAL // who takes over?]

Please take in consideration:
The rom is tested on my GT-6500D. In theory it should run on similar devices, but as I cannot test and reproduce that, I cannot maintain for those
I am not responsible for any damage to your phone
It is my goal to bring omnirom to our device. Please donot ask for any features from other custom roms
Please donot mirror any of my downloads
For now, SELinux is disabled.
Changes: 07-09-2014
My final contrib to this rom
Builds weekly on my jenkins
Switch back to jb_rel_2.0.3 kernel with gpu/ion/msm_fb updated till latest CAF
Switch to display-caf (credits @RonGokhale / TeamHackLG)
Sources for omni/cm and aokp (kernel + android) available on github
Kernelsources: https://github.com/android-legacy/android_kernel_msm_caf
Changes 01-04-2014
kernel upgraded to latest caf jb_2.5.5 (in kk_2.7 still have to fix minor issues)
button backlight working
fixed wifi tethering
latest omni sources
Changes 02-02-2014
kernel upgraded to 3.4.78
kernel: bluetooth updated to caf jb_2.5.5
kernel: switch to ZCACHE / enable zram
EGL blobs updated to i8825 release from samsung
camera works (all credits to TheWhisp)
all updates/improvements from OmniRom (https://changelog.omnirom.org/)
more I must have forgot
Not working:
FM Radio (will check if it can be implemented later)
Known issues:
Lights for back and menu keys not working
For now, please only use ondemand governor. Others might make rom instable
Important! From TheWhisps cm-11.0 thread:
Additional information / resources:
Change logs: see 2nd post of this thread
Google apps: http://goo.im/devs/paranoidandroid/roms/gapps-mini
How to install:
1) ClockWorkMod 6.0.4.5 is required to install this ROM! http://forum.xda-developers.com/show....php?t=2156194
2) Download ROM .zip
3) Download Google apps (optional)
4) Put both .zip files on your device (either internal or external storage)
5) Boot your device into recovery mode
6) Make nandroid backup (if needed)
7) Wipe data/factory reset (not needed if installing above previous cm11 build)
8) Format /system (only if the previous ROM is not the same CM version)
9) Install the ROM .zip file
10) Mount /system, install Google apps
11) Done.
Click to expand...
Click to collapse
Kernel sources used: In my Github account
Screens:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Downloads in second post
XDA:DevDB Information
Omnirom 4.4.2, ROM for the Samsung Galaxy Mini
Contributors
erikcas, TheWhisp, legacyMod, Dazzozo && all omnirom contributors
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: Omnirom
Version Information
Status: Stable
Stable Release Date: 2014-02-02
Created 2013-12-22
Last Updated 2014-09-07
Weeklies available on my jenkins <<<<==== click here
[/URL]omni-4.4.2-20140401-jenad-NIGHTLY.zip
md5: 833f036fe607cb6d2b51eebfa879bb6e
omni-4.4.2-20140202-jenad-HOMEMADE
md5: b981b8a40128f965be9211121c36feaf
omni-4.4.2-20131227-jenad-HOMEMADE
md5: 136b0b78c8d1fd609e5db758d822039a
I installed it to test it. I really like it, but I probably face the same problem with cm11, that is, I cannot mount internal storage (sdcard0).
Will dig more though. Thanks for your work!
Best present for christmas!
bleached said:
I installed it to test it. I really like it, but I probably face the same problem with cm11, that is, I cannot mount internal storage (sdcard0).
Will dig more though. Thanks for your work!
Click to expand...
Click to collapse
you will probably have to repartition with odin using a stockrom. I had the same problem.
thanks erikcas!!!
Sent from my GT-S6500D using Tapatalk 2
erikcas said:
you will probably have to repartition with odin using a stockrom. I had the same problem.
Click to expand...
Click to collapse
This has been discussed a lot actually. I cannot seem to repartition as I get something like "SECURE CHECK FAIL: ID 0X95"
too bad for me and some other people I guess. For the record I have NFC model.
---------- Post added 23rd December 2013 at 12:43 AM ---------- Previous post was 22nd December 2013 at 11:54 PM ----------
erikcas said:
Download removed for now. There is a problem in mounting /cache which causes some nasty Fc's
Will rebuild overnight and check tomorrow
Click to expand...
Click to collapse
Perhaps in the new build you could make external sdcard as internal?
bleached said:
This has been discussed a lot actually. I cannot seem to repartition as I get something like "SECURE CHECK FAIL: ID 0X95"
too bad for me and some other people I guess. For the record I have NFC model.
---------- Post added 23rd December 2013 at 12:43 AM ---------- Previous post was 22nd December 2013 at 11:54 PM ----------
Perhaps in the new build you could make external sdcard as internal?
Click to expand...
Click to collapse
Problem is not in sdcards. Problem is cache is not mounted. Which is a kind of strange as earlier today it did work..
As I stated, will rebuild clean from scratch and test when I wake up.
And no, I will not swap sdcards.
bleached said:
This has been discussed a lot actually. I cannot seem to repartition as I get something like "SECURE CHECK FAIL: ID 0X95"
too bad for me and some other people I guess. For the record I have NFC model.
---------- Post added 23rd December 2013 at 12:43 AM ---------- Previous post was 22nd December 2013 at 11:54 PM ----------
Perhaps in the new build you could make external sdcard as internal?
Click to expand...
Click to collapse
Do you know something both of us said that hundred times but nobody listen to us so just give up nobody here like hear the opinions
Sent from my GT-S6500D using xda app-developers app
What happend with this ROM?
Sent from my GT-S6500D using Tapatalk 2
What are the differences between omnirom and cm 11?
Omni less tweaks and customization so slightly more performance
Cm more customization and tweaks so slightly less performance
sent from behind the screen
cache seems to be fixed. Will test and re-upload within a few hours
can't wait to try
Download readded to second post. Issuelist OP modified.
If you find bugs, please use the "bug report" tab above the first post on any pag of this thread.
Have fun with it
erikcas said:
Download readded to second post. Issuelist OP modified.
If you find bugs, please use the "bug report" tab above the first post on any pag of this thread.
Have fun with it
Click to expand...
Click to collapse
Hi good job for your work but what about AOSP but don't tell me it is just like the AOSP but with more features we want something pure please can you build AOSP and we preffee Android 4.0 ICS or Android 4.1 JB but let it be one thing that it could work without bugs and work on one project just that would be easy and you you will gonna get big support believed me pure ROM with supported version like ICS or JB .
Sent from my GT-S6500 using xda app-developers app
NiceIceDice96 said:
Hi good job for your work but what about AOSP but don't tell me it is just like the AOSP but with more features we want something pure please can you build AOSP and we preffee Android 4.0 ICS or Android 4.1 JB but let it be one thing that it could work without bugs and work on one project just that would be easy and you you will gonna get big support believed me pure ROM with supported version like ICS or JB .
Sent from my GT-S6500 using xda app-developers app
Click to expand...
Click to collapse
http://omnirom.org/ for all your questions about "What is Omnirom".
AOSP for me is a no go for now
omni is kinda new aokp now. due to its policy etc.. I think
aahh youtube worksss
Any chance of camera getting fixed in near future?
@rhisendark could you mount sdcard0? I remember you had problems in CMW 6.0.4.5..

Unofficial OctOs 5.0.2

I ported OctOs using the CM12 device tree by @stargo to targa and have since ported it for our OMAP4 brothers.
Features: (will be added onto)
-CM based so expect those features
-Tentacles settings for more personalization
-SuperSu as primary su binary handler
-Omniswitch
-CM12 Theme Engine
-Fast.
-Snappy.
-Clean.
-Amazing.
Downloads:
The ROM is on my Gdrive.
I recommend PA Gapps.
Install:
Flash on a new ROM slot on the new SELINUX enabled SafeStrap by @stargo
Updates:
Since Lollipop is in early development, I suggest doing a clean install. If you wanna wipe system and caches only that's fine too but don't report bugs.
Bugs:
-LTE has a hard time sticking but my latest build *should* patch that. If you have issues (especially after reboot) go into settings and switch preferred network from 3g to 4g a couple times and/or toggle airplane mode. Hopefully this will be completely fixed in the near future, but it isn't as annoying as the orange data indicator on KitKat.
-Same bugs as CM12
If you encounter bugs please make sure that you clean install on a virgin ROM slot and include a step-by-step on how to repeat the bug and also include a syslog (get the apk from play).
Hope you enjoy the ROM
XDA:DevDB Information
Oct-L, ROM for the Motorola Droid Bionic
Contributors
Oggie7797
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.0.x
ROM Firmware Required: New SafeStrap by Stargo
Based On: Cyanogenmod12
Version Information
Status: Beta
Beta Release Date: 2015-01-11
Created 2015-01-12
Last Updated 2015-01-12
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Oggie7797 said:
Click to expand...
Click to collapse
Thanks for your great effort, and I am on Recurr ROM, LTE data connection is very stable and no need to set APN
Could you please tell what is the difference between this ROM and Recurr one?
rfresh said:
Thanks for your great effort, and I am on Recurr ROM, LTE data connection is very stable and no need to set APN
Could you please tell what is the difference between this ROM and Recurr one?
Click to expand...
Click to collapse
Different features and stuff lol IMA build again tonight if I have time and maybe it'll fix lte for good
Sent from my XT875 using XDA Free mobile app
installing now
The Doctor04 said:
installing now
Click to expand...
Click to collapse
@Grommish is helping with the APN issue. to bypass the phone fc on boot do the voice dialer trick same as CM12
The Doctor04 said:
installing now
Click to expand...
Click to collapse
So I have the latest and greatest GApps running, but I cannot get into the ROM. I keep getting a FC for Google Play Services. Push ok and it takes you back to WiFi. Rebooted, reinstalled GApps, cleared cache, etc. Still no dice. I don't have too much to monkey around with it today, will try a new build once uploaded
The Doctor04 said:
So I have the latest and greatest GApps running, but I cannot get into the ROM. I keep getting a FC for Google Play Services. Push ok and it takes you back to WiFi. Rebooted, reinstalled GApps, cleared cache, etc. Still no dice. I don't have too much to monkey around with it today, will try a new build once uploaded
Click to expand...
Click to collapse
What Gapps? I didn't have this issue on PA Gapps...try setting up without gapps first and flash gapps on a diff session. You're using as a wifi only device right? If so use the radio disable build.prop tweak. On initial boot turn airplane mode on to stop phone fc and add the build.prop line and reboot and flash gapps. that'll fix phone and most other issues if running as a wifi only ROM.
Oggie7797 said:
What Gapps? I didn't have this issue on PA Gapps...try setting up without gapps first and flash gapps on a diff session. You're using as a wifi only device right? If so use the radio disable build.prop tweak. On initial boot turn airplane mode on to stop phone fc and add the build.prop line and reboot and flash gapps. that'll fix phone and most other issues if running as a wifi only ROM.
Click to expand...
Click to collapse
I tried both the slimmed down PA GApps, and I also tried DHacker's GApps from 12/21/14. I cannot get past the FC from Google Play Services. Will maybe give it the old college try later this evening. I am not seeing any issues really with CM12 based roms using them as a WiFi device, so I haven't felt the need to do all the things you are suggesting. If I have some time tonight, I will give it a go
The Doctor04 said:
I tried both the slimmed down PA GApps, and I also tried DHacker's GApps from 12/21/14. I cannot get past the FC from Google Play Services. Will maybe give it the old college try later this evening. I am not seeing any issues really with CM12 based roms using them as a WiFi device, so I haven't felt the need to do all the things you are suggesting. If I have some time tonight, I will give it a go
Click to expand...
Click to collapse
Try flashing on a brand new virgin slot lol idk why but sometimes that fixes stuff
No luck, even after a fresh install in slot 2. I flashed @stargo latest build just a short time ago and zero Play Services FC. Very weird
I'm making progress with getting LTE stable. Expect another build late Sunday/Monday.
Sent from my XT875 using XDA Free mobile app
Oggie7797 said:
I'm making progress with getting LTE stable. Expect another build late Sunday/Monday.
Sent from my XT875 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks and really appreciated!
rfresh said:
Thanks and really appreciated!
Click to expand...
Click to collapse
@rfresh mind sending me build.prop from RR? Or copy/paste it into a pastebin and send me the link..I don't feel like downloading an entire ROM and I need to compare some settings I've made. Thanks.
Sent from my XT875 using XDA Free mobile app
Edit:
Sync'd up and started another build with the phone patch in it. I'll check back in a few hours or in the morning to check build progress, with CM12 TE being merged along with lots of new code, there's always a possibility for a fail. Will build maserati and/or spyder tomorrow.
Uploading a new build+md5 using new commits from Octos and @stargo this build should be flashed on a NEW rom slot to avoid any bugs! This build also uses my phone fc patch. Oh and also has new theme chooser
Getting Better
Flashed first build, got API problems.
Flashed latest build, API is solid, but having Google Play fc with nano, pico, and normal gapps. Same with CM12. Flashed onto clean slot each time. SS 3.75. Also flashed ROM first, then rebooted and flashed gapps.
I remain optomistic.
antennaman1969 said:
Flashed first build, got API problems.
Flashed latest build, API is solid, but having Google Play fc with nano, pico, and normal gapps. Same with CM12. Flashed onto clean slot each time. SS 3.75. Also flashed ROM first, then rebooted and flashed gapps.
I remain optomistic.
Click to expand...
Click to collapse
Sorry man it's a chromium issue and it's being worked on! For now if you flash the first one and change the line ro.telephony.default_network=10 to a 6 in build.prop it will fix api issue but after each reboot you will have to toggle 4g as preferred network under settings...that's what I done and I'm using it as a daily. Again, sorry bout the issue and it is being worked on. Thanks for the report.
Sent from my XT875 using XDA Free mobile app
Cool. Thanks for the reply. I will get some sleep and reflash after breakfast. It looks great; might keep the Bionic relevant until I find my "can't miss" new phone!
Update:
Reflashed in Slot 3. Used pico, nano, mini, and full. All fc on Google Play Services. Radios are solid. Exact opposite of CM 12- I get com.android.phone fc and wifi network is forgotten at random. If I had a clue on how to code, I could figure out how to combine the working parts and make one good Lollipop for Targa!
Will try a different slot. Can I try a different .apk for Play Services?
If so, I can push it to the SD card and flash from there.
To elaborate on my idea:
If I flash the ROM first, it goes wonderfully. That's why I was thinking about just flashing the .apk's and building from there. If the Play Services, then Play Store work, then maybe onward and upward?
Some guidance on what to sideload first would be appreciated.
To Google I go!
antennaman1969 said:
To elaborate on my idea:
If I flash the ROM first, it goes wonderfully. That's why I was thinking about just flashing the .apk's and building from there. If the Play Services, then Play Store work, then maybe onward and upward?
Some guidance on what to sideload first would be appreciated.
To Google I go!
Click to expand...
Click to collapse
I've already pulled a log bud it's a chromium issue and its not our device it's a Lollipop issue and I think Grommish made a fix and I'm going to try it out and build tonight after I make clobber. Do what I suggested about the first build inside build.prop. I use it as a daily.
It's nothing you can do about it it has to be done on my end while I build.
Sent from my XT875 using XDA Free mobile app

[ROM]★[Mako LP 5.1.1][ZOMBi-POP OMNI KANG B1][May 17]★

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You must do a full wipe in recovery if coming from another ROM. Don't forget to do a Nandroid Backup first and give the ROM 15 mins to stabilise! The first boot will take 15 minutes!
Features and Tweaks
This ROM is based from OMNI AOSP sources, sources can be found there: Zombi-POP github
Based off omni-5.1.1-20150517-zombi_mako-KANG source by kldoc/lj50036/hardslog
Full Aroma Installer for main rom
Stock Omni Kernel OR
DPI Size: 320 (Mako recommended), 280 (small fonts), 240 (tiny fonts)
Launchers: Omni, Google Experience Launcher, Apex , Nova
Boot Animations: ZOMBi-POP, Android-L, Nexus Phase Beam
Gapps (updated by sbdags to Google latest apks and libs)
Misc Apps: ESFile Explorer, Adobe Flash, AdAway, Titanium Backup, Keyboard Manager
Tweaks: File system and performance optimised, Init.d support, Zip Align, Force GPU Rendering, Browser2RAM
Continued Best Support of any ROM!
Warning - experimental tweaks
[*]Option to enable / disable fsync during install - CAN CAN CAUSE DATA LOSS IF SUDDEN SHUTDOWN OR CRASH
[*]Tip 1: Go to Settings - About Phone, Click build number 7 times
Now you will see Developer Settings & Performance menus
Bug List
[*]No Floating windows yet
Change Log
Update 1
-Terminal fixed
-Kernel update : android-msm-mako-3.4-lollipop-mr1
Click to expand...
Click to collapse
The Team
@sbdags - Creative Mastermind (From CROMi-X/CROMBi-kk/ZOMBi-X ROMS)
@lj50036 - Source Guy (From CROMBi-kk/ZOMBI-X ROMS)
@hardslog - The Canadian (From Grimlock ROMS)
@kldoc - The omnifrog (mako maintainer)
Credits
Google
Omni Team - Thanks!
@_that For all the great advice, watching over us and fixing everything we break!!!!!
All the beta testers for your patience and feedback : fatboyinlycra, berndblb, drewski_1, duckredbeard, keshavmot2, corb06, jmaybush, JoJoDaClown, kansasboy001, TrofeoSC
To Do
Fix loads of stuff!
XDA:DevDB Information
[ROM]★[Mako LP 5.1.1][ZOMBi-POP OMNI KANG R1][May 17]★, ROM for the Google Nexus 4
Contributors
kldoc, lj50036, hardslog
ROM OS Version: 5.1.x Lollipop
Based On: OMNI
Version Information
Status: Beta
Beta Release Date: 2015-05-19
Created 2015-05-19
Last Updated 2015-07-17
Reserved
UPGRADE INSTRUCTIONS
Steps
1. If you haven’t yet, unlock your Nexus 4
*ALL THESE INSTRUCTIONS CAN BE FOUND HERE
Nexus 4 Guide-Unlock Bootloader, Root, Install Custom Recoveries & Custom ROMs/Kernel
2. Install the omni version of Team Win Recovery Project (TWRP). Note this ROM will NOT install with older versions of recovery!
FLASHING THE ROM FROM RECOVERY
Steps
1. Download the ROM below and save to your internal SD. Do not unzip the file.
ZOMBi-X ROM DOWNLOAD
Note: The first boot after install will take 10 mins whilst everything is built. Some people might think it is looping but it is not
ZOMBI-POP Update 1 - Mirror 1
ZOMBI-POP Update 1 - Mirror 2
Reserved
All,
The ROM is still in BETA and by flashing it you are helping the BETA Testing process
It may still have some bugs, spontaneously reboot, drain the battery faster or heat up a bit. The aim is to make it better and fix them.
If you find a bug and want to report it here please post a logcat (after it occurred) with a description of what you were doing at the time and the rough timing in the logcat to look at (these things get huge!).
You can also post a dmesg which is the kernel boot logs and can indicate issues with data corruption or hardware.
If you get a reboot then please post a last_kmsg from the /proc folder.
How to get a logcat
How to get useful logs
Thank you!!
Join us on IRC for a chat or if you have questions:
Freenode
zombi-x
There is no Q&A section for this rom as it is still in dev so you are ok to post your questions here!
Reserved
MINE!!!!
.slap lj50036
Unable to download....
pm_dsp_ra said:
Unable to download....
Click to expand...
Click to collapse
I just tried downloading it using Chrome for windows, no issue, although i've heard about issues downloading google drive files within Android.
Thanks. I have downloaded it.
Mako's kernel 5.1 update incoming:
https://gerrit.omnirom.org/#/c/13723/
I will try to make an updated Zombi-pop build before the week-end.
Does this rom have middle lock screen shortcuts? CM12 theme engine?
biron_w said:
Does this rom have middle lock screen shortcuts? CM12 theme engine?
Click to expand...
Click to collapse
No idea what middle lock screen shortcuts is ....
No this rom is OMNI based, why would it have a CM12 theme ?
Thx Josh
Unable to download.
sseuorosal said:
Unable to download.
Click to expand...
Click to collapse
That does not help ?
There are 2 mirrors, so you mean neither of them work for you ??
I have no issues downloading from either mirror ....
Do not download from android, do from a PC ....
Thx Josh
Good to see this thread up as a lot of hard work has gone into this Not from me I might add!
Such is life.
Sent from my Nexus 7 2013 using XDA Free mobile app
Will upload a new build with 5.1 kernel by tomorrow, stay tuned
Thank you for this, install went smooth...trying it out now. :good:
current build installed without gapps:
- start preinstalled terminal emulator -> fc
- swype text aosp keyboard -> fc (without google swype lib, swyping should be disabled by default)
browsing seems to be faster with browser2ram enabled.
im am curios how this will affect battery life. i will test and report.
very cool installer.
for now its (regarding missing in-rom features) exactly the same state as the omnirom build is.
so hope there will be some features in the future.
thanks in advance and for your time already !!
Sent from my Nexus 4 using XDA Free mobile app
5.1 build for kernel update won't happen as 5.1.1 got released by Google, waiting for sources, will update once it's all there

[ROM][P31XX][6.X] Beanstalk ROM - v6.15 (Updated 05/02/2016)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Interested in Porting/Building BeanStalk on another device?
Please visit the BeanStalk Development Thread to avoid cluttering this thread.
CyanogenMod 13 based
PIE
Built in Task Manager switcher
OnTheGo Mode
App Circle bar
System UI Tuner
Quicker system animations
Trimmed down fat and excess bloat
Option to enable all widgets
Numerous extra lockscreen options
LCD Density
Custom original BeanStalk Wallpapers by skyliner33v
Custom BeanStalk bootanimation by skyliner33v
3-minit battery support
Clock and date options
Contextual Header - Original and Polygraphic
Battery styles - Includes specific colors and styles. Also includes battery bar
Do not disturb option
Show notification count
Recent screen options
Customizable navigation bar
Use Omniswitch as default recents
Built-in screen record
Toast animations
App Circle bar
Gesture Anywhere
Disable FC warnings
Disable Immersive message
Force expanded Notifications
Configure scrolling cache
Build.prop MOD options to enable/disable tweaks as preferred
Less frequent Notification sounds options
CRT screen off/on options to specify how the animation shows
Enable/disable wake up on charge option
Superuser fully embedded into the build and accessed from settings menu
CM Performance options and features
Hide superuser icon
Developer options and advanced reboot enabled by default
Numerous cherry-picks and improvements throughout the build.. baked into the awesomeness of existing CM layout.
Numerous other options hiding throughout the build. For a full list of changes and features, please be sure to checkout changelog below.
- To be determined...
Download 6.0.x GAPPs from here - Thanks Open Gapps team.
** Please make sure you select the correct GAPPs for your device requirements. I suggest the mini package. Anything
else is overkill IMO. **
For a complete listing of all (other) supported BeanStalk devices and downloads, please visit BeanStalk Downloads page
New Builds:
P3100
BeanStalk-6.15-20160501-espresso3g.zip
P3110/P3113
BeanStalk-6.15-20160501-espressowifi.zip
Old Builds
p3100 (espresso3g)
BeanStalk-6.15-20160424-espresso3g.zip
BeanStalk-6.14-20160417-espresso3g.zip
BeanStalk-6.14-20160409-espresso3g.zip
BeanStalk-6.13-20160403-espresso3g.zip
BeanStalk-6.13-20160331-espresso3g.zip​
p3110/p3113 (espressowifi)
BeanStalk-6.15-20160423-espressowifi.zip
BeanStalk-6.14-20160416-espressowifi.zip
BeanStalk-6.14-20160408-espressowifi.zip
BeanStalk-6.13-20160402-espressowifi.zip
BeanStalk-6.12-20160330-espressowifi.zip​
Beanstalk Change Log
Change log can also be found from within the ROM by going into settings menu -> about phone -> about beanstalk -> changelog
* Download ROM and latest GAPPs.
* Copy ROM and GAPPs from above to sdcard.
* Reboot into recovery (TWRP 3.0.0 recommended for backwards compatibility)
* Full wipe and format is ALWAYS suggested to avoid odd issues.
* Flash ROM and then flash GAPPs.
* Reboot and enjoy BeanStalk goodness.
BeanStalk source can be found HERE
CyanogenMod source can be found HERE
Device-Source
https://github.com/cyanogenmod/android_device_samsung_espressowifi, https://github.com/cyanogenmod/android_device_samsung_espresso3g
Kernel-Source https://github.com/cyanogenmod/android_kernel_samsung_espresso10
XDA:DevDB Information
Beanstalk6, ROM for the Samsung Galaxy Tab 2
Contributors
CodyTXR0KR, @scott.hart.bti, @Android-Andi, @Ziyan
Source Code: https://github.com/scotthartbti/android
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.0.x
Based On: CyanogenMod
Version Information
Status: Testing
Created 2016-04-02
Last Updated 2016-04-01
Good job - always good to have options!?
Sent from my Nook HD+ using XDA-Developers mobile app
Why does everything say MOD?
hkjr said:
Why does everything say MOD?
Click to expand...
Click to collapse
There was a bad commit in the CM source. It's been reverted, running new builds now. If you're using a p3113 the 6.12 build works well, if not new downloads will be available this weekend.
I will test the new build soon and provide feedback!
hope it will defeat some roms...
This would be compatible with 10.1 series as well, OP can update?
Everything is working fine for me on p3100 build 6.13
Sent from my Galaxy Tab 2 3G using Tapatalk
billysam said:
This would be compatible with 10.1 series as well, OP can update?
Click to expand...
Click to collapse
I will look into it. These take between 5 and 13 hours to compile on my old laptop(each), so 2 devices is already a big time commitment. However, I don't plan on building "nightlies", so I'll look into supporting my 10 inch borthers/sisters anyways.
joblee said:
Everything is working fine for me on p3100 build 6.13
Sent from my Galaxy Tab 2 3G using Tapatalk
Click to expand...
Click to collapse
That's great to hear. The 6.13 p3113 build has a nasty bug (as shown above), glad to hear one of them came out.
MOVING FORWARD:
I plan to build these as quickly as I can until it's as stable and bug free as I can get it, after which I'll probably only run updates bi-weekly. I really love this ROM, but it's a pain in the ass to build and I'm working with a very dated computer so please be patient. :good:
Work fine in p5110
Nice work, dude! Thank you for the new rom.
Everything works fine on the P3100.
No problems have been found yet .
I think that the update once a week , it is a good idea .
We are waiting your new builds )
Good luck !!!
Is it possible to overclock this kernel?
Ratata82 said:
Is it possible to overclock this kernel?
Click to expand...
Click to collapse
I don't believe so, but I haven't tried it myself to know for certain. It's just an unmodified CM13 kernel, so I doubt it, but IF it's possible it would be in "Settings>>Kernel Adiutor>>CPU"
Thanks Dude
A New ROM for our Device, Download and Test it on My P3100. Thanks Man :good:
armuttaqin said:
A New ROM for our Device, Download and Test it on My P3100. Thanks Man :good:
Click to expand...
Click to collapse
How is it?
Is 03.31 build compatible with twrp 3.0.0.2?
it's my fault, iam sorry, TWRP 3.0.1.0 make my device to espresso wifi
Marecki_ said:
Is 03.31 build compatible with twrp 3.0.0.2?
Click to expand...
Click to collapse
I don't see why it wouldn't be. I test with 3.0.0-0 because the newer ROMS build with a device name of "esspresso[wifi/3g]" and 3.0.1+ (afaik) doesnt support the old device names (p31xx) breaking backwards compatibility. 3.0.1+ will install espresso ROMS, 2.9x and older does p3xx ROMS, 3.0.0-0 is the newest 'old' recovery that does both, which I need.
I'll test it against the current TWRP this week.
Stuartz22 said:
Why no Phone Data ? I can't download whatsaapp Mesengger, they told not compatible phone.
---------- Post added at 07:26 PM ---------- Previous post was at 07:00 PM ----------
Why i can't use rom espresso 3g, system error in twrp 3.0.1.0
Click to expand...
Click to collapse
In both cases I need you to send me a logcat to help you. How to fetch a logcat
Beanstalk and TWRP both have built-in Terminal emulators.
Be sure you did a full wipe of Dalvik, System and Data. And the ROM matches your device, as that's the most common problem.
** edit: I see you worked it out. Hope you enjoy.
CodyTXR0KR said:
I don't see why it wouldn't be. I test with 3.0.0-0 because the newer ROMS build with a device name of "esspresso[wifi/3g]" and 3.0.1+ (afaik) doesnt support the old device names (p31xx) breaking backwards compatibility. 3.0.1+ will install espresso ROMS, 2.9x and older does p3xx ROMS, 3.0.0-0 is the newest 'old' recovery that does both, which I need.
I'll test it against the current TWRP this week.
In both cases I need you to send me a logcat to help you. How to fetch a logcat
Beanstalk and TWRP both have built-in Terminal emulators.
Be sure you did a full wipe of Dalvik, System and Data. And the ROM matches your device, as that's the most common problem.
** edit: I see you worked it out. Hope you enjoy.
Click to expand...
Click to collapse
I flashed the 20160402 build and Slim Gapps on my p3110 with TWRP 3.0.0.1 and it boots OK. The Rom seems working fine. Back botton kill app don't work and I don't like bootanimaton in landscape mode, but it's cosmetic. Great work. Good to see other options for the old tablet. Thank you so much
New Builds:
P3100
BeanStalk-6.13-20160403-espresso3g.zip
P3110/P3113
BeanStalk-6.13-20160402-espressowifi.zip
(*Tested 'MOD' bug fixed*)

[ROM][6.0.1]Nseven [N910VVZW2CTI1][5/18/2022]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note 7 Port For Note 4 N910V​
- Based off of stock N910VVZW2CQB2 firmware
These are International Roms With Verizon Added
You will have to update your bootloader using @hsbadr method if your coming from Lollipop
Thank you @hsbadr
-Touchwiz Rom
- Rooted
- DeoDexed
- Zip Aligned
- Nougat Apps
- Samsung Theme Store
- My Verizon
- VerizonVoiceMail
- ScreenMirroring
- Chromecast Mirroring Netflix
- Nougat Features
- Busybox
- Xposed
- Hotspot Tethering
- De-Knoxed
=Disclaimer=
- I am not responsible if you brick your phone!! Flash at your own risk!!
Or if you mess up your phone in anyway!!!!!!
THANK YOU!
Must Be on N910VVRU2CPD1 Bootloader
Please Read Carefully In Notes Below If your Testing Nseven Port
Also
I post these roms out of the goodness of my heart, Also
because Verizon/Samsung does not like
giving us the good updates, to the note 4 users. So please, if you can, support my work.
Because Its all free.
This Rom Supports Verizon
Install Instructions
Have at least 75% battery before flashing
Download Nseven
Put Nseven Rom on External SD Card
Boot into TWRP
Create Backup/Backup Everything even Internal SD Card
Wipe All But External SD Card
Flash N Seven in TWRP
ReBoot
Boot time 8 to 12 Mins
Xposed Already in N Seven
Flash in TWRP xposed framework arm found Here
Then install xposed apk Here
Xposed-Uninstaller Here
Bugs/N Seven/Also Read Notes Below
Brightness, The cause--->Always On Display Just Toggle Off
Fingerprint
N Seven Control Settings has Bugs
Outdoor mode
Problem with USB Connecting to PC Just dial *#0808# Select MTP + ADB
Boot Animations
Original White Samsung by gadget
Note 4 Stock by gadget
Google by gadget
S7 Verizon
Grace by gadget
Grace V2 New by gadget
More Here
Modem Tars
UnZip and Flash With Odin in AP
CQB2
CQA1
Odin
CTI1 Newest
Kernel
With the permission of Xceed Kernel/@kairi_zeroblade<---Follow for Updates
Already in Nseven Build2
I Put this flashable Kernel together for Testing Battery Life below
Xceed Kernel Working Great
With the permission of @freeza /BeastMode ZeroL Kernel, we are able to test his kernel with Nseven Rom
Hit his Thanks button:good:
BeastMode ZeroL Kernel Working Great
Tested by @Android.Ninja So Be sure to thank him for testing
BeastMode V2 ZeroL Kernel Testing
SuperSU
SuperSU
Just in case you lose root flash this
Donating Is also much appreciated
Rom Downloads
Nseven Rom Newest CTI1 Firmware
Code:
[URL="https://chevyrhoads.wixsite.com/nseven"]NsevenBuild 4.0 CQB2[COLOR="red"] Newest[/COLOR][/URL]
Changelogs/Nseven 4.0 Notes
Code:
[U][B]Notes N Seven Build4.0[/B][/U]
I know you guys/gals been waiting, so here it is Build 4.0, @Android.Ninja is testing [COLOR="red"] still a working progress[/COLOR]. If your coming from NsevenBuild2CPL1 wipe everything expect data and External SD card. This way you won't have to restore all your apps. Note: Fixed Google Services FC on Boot, Changes alot of apps out. [COLOR="red"]Whole New framework, systemUI, and Settings[/COLOR]. Updated SuperSU, Dial Codes working. *#27663368378# Is ServiceMode. [URL="https://forum.xda-developers.com/showthread.php?t=2303905"]How to Enable Hidden Dial Codes[/URL] Wifi Bug (Grants permission to modify the device's open theme) Still working on.
Upgraded to the new firmware N910VVZW2CQB2, Buildprop Changes, csc changes, SystemUI Changes, 4G Fixes, Stagefright Updated, Updated Permissions and Symlinks, And much More. Dont mess With Global mode in Settings. Mods files you can flash after Nseven Rom----> Font Mod, Custom Kernels only for Nseven. ForceDoze, Viper4 are Preinstalled.
Also if you want GoogleNowSearch Linked to Home key, go into Nseven Settings/System Enhancement Settings/Custom Hardware Key Functions/ Disable all but Press HOME key functions. Use Search Buttom. Spen with Keyboard not working Just yet, but still looking into. Dont flash framework fixes from Build2 on Build4.0, Device maintenance 3 dead buttons, still working on
For better Battery Life Flash a custom kernel. Give battery some time to settle in. VoiceWakeup is Working . If your using root explorer and want to change some things, make sure you MOUNT R/W
People have Mentioned they have to look for fixes and its a task searching through posts, dont worry about that, just flash new rom and see if it works. If not PM me, Ill help if i can.
CQA1 Modem ready for download above
Notes N Seven Build2
You will get google services has stopped on boot, just go through setup and go to settings/applications/google play services and enable all permissions
Ported Nougat Apps Already in Nseven Thanks to @Albe95
Nougat Beta Ported Apps
Mods/Fixes:
Code:
[URL="https://www.androidfilehost.com/?fid=312968873555009484"]Samsung 300+Font [/URL]
Install font as normal apk
[URL="https://www.androidfilehost.com/?fid=529152257862694937"]4g Fix Nseven[/URL] [COLOR="red"]If you get 4G on boot, Do not flash 4G fix[/COLOR]
[URL="https://www.androidfilehost.com/?fid=385035244224412069"]GearManager_ClipboardUIService [/URL] <--NsevenBuild2 only
[URL="https://www.androidfilehost.com/?fid=745425885120695603"]ForceDoze Mod[/URL]
[URL="https://www.androidfilehost.com/?fid=313042859668276512"]Viper4DolbyMod [/URL]
Older Downloads/Older Builds/Fixes
All Downloads If Needed
Netflix
If you have problems with Netflix go to system/vendor/lib and delete "liboemcrypto.so then Reboot
If anyone Can Help with Bug Fixes, It would be very much appreciated
Anyone can Post your own fixes.
If you have a fix, let me know, ill post in downloads above
and write you in for credit.
Thanks To
@E-Team
@Albe95 @Gabri98 @Tigre09
@Chainfire for SuperSU
@xda community
@Darkera
@Tamerlan2009
@daxgirl
@bulldog74ts
@PaulPizz
@Vernox701
@gadget!
@gcounts
@rayden25
@singhking83
@kairi_zeroblade
@Pafcholini
@aukhan
@placiano
@Android.Ninja
And anyone else I forgot to mention
XDA:DevDB Information
Nseven, ROM for the Verizon Samsung Galaxy Note 4
Contributors
chevyrhoads, Android.Ninja
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: N910VVZW2CQB2
Based On: Touchwiz
Version Information
Status: Testing
Current Stable Version: Nseven CQB2
Stable Release Date: 2017-03-06
Created 2016-08-06
Last Updated 2017-03-09​
Definitely taking this for a spin tonight!
Sent from my SM-N910V using Tapatalk
Hello chevyrhoads. Just came across this and am excited to try it out. Does this come with the theme store also? Thank you
dhplap said:
Hello chevyrhoads. Just came across this and am excited to try it out. Does this come with the theme store also? Thank you
Click to expand...
Click to collapse
yes it does
chevyrhoads said:
yes it does
Click to expand...
Click to collapse
Alright!! That's awwesome! Just downloaded it and gonna install momentarily. Thanks so much. I'll report how it goes. You just made my day
dhplap said:
Alright!! That's awwesome! Just downloaded it and gonna install momentarily. Thanks so much. I'll report how it goes. You just made my day
Click to expand...
Click to collapse
Remember to backup everything Photos/Music. Backup Internal SD Card
chevyrhoads said:
Remember to backup everything Photos/Music. Backup Internal SD Card
Click to expand...
Click to collapse
OK will do. I'm making a backup as I type right now. Thanks again.
Thanks!!! Definitely going to flash this asap!
Sent from my SM-N910V using XDA-Developers mobile app
Well so far I'm loving it. Everything seems to be working fine, thank you again chevyrhoads. Themes are working great also. The only thing so far is the camera works but it's not full screen. If you want to take a picture you have to touch to the left of what ever function you are trying to use. So far that's all I see. Will report more if it arises.
K will put on fix list...need more tester lol
Sent from my SM-G935V using XDA-Developers mobile app
Loving this rom! @chevyrhoads, thank you for porting this. The camera screen size can be fixed by going to settings-display-display scaling, and select standard.
gcounts said:
Loving this rom! @chevyrhoads, thank you for porting this. The camera screen size can be fixed by going to settings-display-display scaling, and select standard.
Click to expand...
Click to collapse
Cool Thankyou
gcounts said:
Loving this rom! @chevyrhoads, thank you for porting this. The camera screen size can be fixed by going to settings-display-display scaling, and select standard.
Click to expand...
Click to collapse
Cool. Yeah that fixed it!
I'm guessing this is a TouchWiz ROM. Anyway we can get some screenies?
So Far installed well, everything seems to be working, took a while for gallery/video to catch up from SD card (256g) ---
Running Titanium backup restore (app only) about 90 apps restoring and will give more information as this process finishes..
thanks --- SO FAR ---- works great --- data immediately also
@chevyrhoads......when you say 4 way menu are you talking about this?
gcounts said:
@chevyrhoads......when you say 4 way menu are you talking about this?
Click to expand...
Click to collapse
No im talking about this
chevyrhoads said:
No im talking about this
Click to expand...
Click to collapse
That looks like the menu you get when flashing a N910F ROM with louforgiveno's data fix. From what I gather there's something modded in the build.prop that causes that.
If I get a chance I'll take this for a spin tomorrow.
Oh... @chevyrhoads... you might want to put in the OP what bootloader one should be on to use this ROM. Not that people actually read the OP or anything. I can't wait for the first idiot to ask whether he can dirty flash this.
chevyrhoads said:
No im talking about this
Click to expand...
Click to collapse
if you go into build prop.....towards the bottom you'll see the line: ro.build.scafe=americano
change that line to ro.build.scafe=capuccino
if you check my last post you'll see the power menu that I have on my phone after changing that build prop line, it's dark because of my theme.
Deleted!!!

Categories

Resources