So I have a developer edition Verizon moto x and its gsm unlocked but anytime I flash a CM ROM I get no signal bars but my internet and calls work but I can't send any SMS. Is there a fix for this?
devoureddreams said:
So I have a developer edition Verizon moto x and its gsm unlocked but anytime I flash a CM ROM I get no signal bars but my internet and calls work but I can't send any SMS. Is there a fix for this?
Click to expand...
Click to collapse
Check that your APN settings are correct for Verizon use.
KidJoe said:
Check that your APN settings are correct for Verizon use.
Click to expand...
Click to collapse
Sorry I'm using it on att and apns are correct its only on cm based roms
Related
HI ,
I was wondering if anybody on hear is running a Moto X on the Sasktel network?
I have Moto X model XT1058 sim unlocked . When I or the sasktel rep chooses the sasktel network ,
it just says
registering on Sasktel
Click to expand...
Click to collapse
, then it says
Can't connect ot this network right now try again later
Click to expand...
Click to collapse
So I was hoping some one on here had one working on sasktel, and if so how did they get it to work register.
Thanks!
surrey101 said:
HI ,
I was wondering if anybody on hear is running a Moto X on the Sasktel network?
I have Moto X model XT1058 sim unlocked . When I or the sasktel rep chooses the sasktel network ,
it just says , then it says
So I was hoping some one on here had one working on sasktel, and if so how did they get it to work register.
Thanks!
Click to expand...
Click to collapse
This has the radio that moto x works on http://forum.xda-developers.com/showthread.php?t=2502161
Sent on my Gummy running Lenoto X
flashallthetime said:
This has the radio that moto x works on http://forum.xda-developers.com/showthread.php?t=2502161
Sent on my Gummy running Lenoto X
Click to expand...
Click to collapse
Yea I looked at and It shoudl run on sasktels , here what it says on there webpage about a non-sasktel device -
it must be HSPA/UMTS and operate in the 850MHz and 1900MHZ frequency bands
Click to expand...
Click to collapse
Here is the webpage http://www.sasktel.com/personal/mob...s/non-sasktel-device-compatibility-check.html
I was wondering if somebody with an unlocked moto x could type there number into the enter your imei number to find out if its compatible ?
I try it with mine and it just says
Your device IMEI can not be verified at this time, please try again later.
Click to expand...
Click to collapse
It keeps giving me a please try later Warning, although I'm not sim unlocked, there are some folks who are running on telus and kodoo
Sent on my Gummy running Lenoto X
The XT1058 should work, any chance your phone is blacklisted? Have you used it with any other networks?
flashallthetime said:
It keeps giving me a please try later Warning, although I'm not sim unlocked, there are some folks who are running on telus and kodoo
Sent on my Gummy running Lenoto X
Click to expand...
Click to collapse
Thanks for trying.
Got it working , took it to a Sasktel Rep who knew what they were doing. And they got it working.
Thanks everbody for your suggestions and help!
Hello dear friends, Ive been wondering if it's possible that I flash a XT1053 (also D.E.) firmware onto my XT1060 Verizon D.E. and it would become a XT1053 handset for use on GSM networks? Sorry in advance if my question is too silly, but I have searched much for a week now without no any clear answer. Thank you very much too pay attention to my question?
You probably can, but you would get no service since the Verizon Version es CDMA and the XT1053 Version is GSM. But I think I heard that if you edit the Build.prop lines you can probably get service. Also this shouldn't go in the Development Forum, you should move this to the Q&A Forum.
Sent from my XT1053
Maybe if u edit the .xml to avoid flash the modem
Enviado desde mi XT1058 mediante Tapatalk
flusshd said:
Hello dear friends, Ive been wondering if it's possible that I flash a XT1053 (also D.E.) firmware onto my XT1060 Verizon D.E. and it would become a XT1053 handset for use on GSM networks? Sorry in advance if my question is too silly, but I have searched much for a week now without no any clear answer. Thank you very much too pay attention to my question?
Click to expand...
Click to collapse
You can definitely flash foreign builds onto the XT1060 Dev Edition. I was in fact running the German build of 4.4.2 on my XT1060 because there is no bloat to mess with. I've switched to the T-Mo 4.4.2 build now so I can use faux kernel but thats beside the point. I have no problem using these builds on Verizon's network as long as I have LTE/CDMA selected as the network mode (instead of LTE/GSM).
BUT
You can only flash system, boot, and motoboot to my knowledge. I haven't flashed any of the others because I haven't wanted to take the chance and have to spend time fixing it if something goes wrong. If you know how to use fastboot to flash specific files then you're golden.
If you want to use your XT1060 on GSM networks, then flashing system, boot, and motoboot from a T-Mo or foreign build will help you in that department. The VZW firmware doesn't have a lot of options for GSM networks (network modes, APN settings etc.) but the GSM builds do.
jp1044 said:
You can definitely flash foreign builds onto the XT1060 Dev Edition. I was in fact running the German build of 4.4.2 on my XT1060 because there is no bloat to mess with. I've switched to the T-Mo 4.4.2 build now so I can use faux kernel but thats beside the point. I have no problem using these builds on Verizon's network as long as I have LTE/CDMA selected as the network mode (instead of LTE/GSM).
BUT
You can only flash system, boot, and motoboot to my knowledge. I haven't flashed any of the others because I haven't wanted to take the chance and have to spend time fixing it if something goes wrong. If you know how to use fastboot to flash specific files then you're golden.
If you want to use your XT1060 on GSM networks, then flashing system, boot, and motoboot from a T-Mo or foreign build will help you in that department. The VZW firmware doesn't have a lot of options for GSM networks (network modes, APN settings etc.) but the GSM builds do.
Click to expand...
Click to collapse
Thank you guys!
These info are surely helpful to me. As for my case, I'm going to receive a Verizon Moto X Xt1060 from my brother, but my network in here (outside of US) is GSM. Though my brother told me Verizon Moto X is a dual network handset and it supports GSM carriers, but through searching I read that it's right that it is able to work on GSM networks but not fully, especially 4G LTE and some other value-added services. Well, the only two things I need to be clear is whether XT1060 works perfectly in voice calls, 4G LTE, sms, mms... and other GSM stuff. A friend told me that by flashing a XT1053 firmware which is original GSM, my phone would become full GSM handset, no longer Verizon or any CDMA at all.
Well, anyone else please confirm this for me? Any dear friend have been using XT1060 with identical issue as my case? Many thanks again.
can someone make a guide for flashing foreign builds on different variants will be highly appreciated :good:
i found a moto X developer and will this work on the att network and i hope someone can help me out?
GSM/GPRS/EDGE 850/900/1800/1900 (Quadband) UMTS 850/900/1900/2100
According to this page: http://en.wikipedia.org/wiki/Moto_X#Variants
The Moto X model XT-1053 is the unlocked Developer Edition phone and does work on AT&T. The bands area also listed there.
thank for the help.
So i have to download the moto X developer image for att right?
perlsyntax said:
thank for the help.
So i have to download the moto X developer image for att right?
Click to expand...
Click to collapse
Yes that appears to be correct. I do not have a Developer Edition, but there is only one set of images for Verizon, which does have a DE device available. The firmware is the same, to my understanding, but the bootloader is able to be unlocked officially via the Motorola website.
Here are the firmwares you'll want. Ensure that if you pick one, you can only go UP in version, not down. So verify which version is on the phone first. You can only flash that version or a higher version (upgrading) but cannot downgrade to an older version. That will cause problems.
http://sbf.droid-developers.org/phone.php?device=0
Edit
Nemosfate said:
You want one of these UNLESS you're on 4.4.4 then you'll have to get it from Motorola.
I have the xt1053 developers edition and it works just fine on at&t , that's what I'm using
root, roms, and themes.. oh my!
Click to expand...
Click to collapse
What about the XT1060DEV is this the Verzion phone or the gsm one?
perlsyntax said:
What about the XT1060DEV is this the Verzion phone or the gsm one?
Click to expand...
Click to collapse
XT1060 is the model for Verizon.
Google what bands it uses. Then compare to what at&t uses. I've seen in here people using it on tmo Idk about at&t. As far as which version to mix with your phone I'll bow out to someone with more experience with that
Edit: and next time you post make sure you put what MODEL phone you have and the software version. Would've saved some time possibly.
root, roms, and themes.. oh my!
Nemosfate said:
Google what bands it uses. Then compare to what at&t uses. I've seen in here people using it on tmo Idk about at&t. As far as which version to mix with your phone I'll bow out to someone with more experience with that
Edit: and next time you post make sure you put what MODEL phone you have and the software version. Would've saved some time possibly.
root, roms, and themes.. oh my!
Click to expand...
Click to collapse
Sorry about that.I hear the samething it work with t-mobile.
No problem.. And I know there's a thread somewhere with this info in it.. So a search and see if you can find it.. Good luck
root, roms, and themes.. oh my!
Hello guys I've moto x verizon rooted and boot loader is unlocked. It isn't developer edition. Sim card doesn't work. I am out of USA (Pakistan) so every network here is GSM. but it isn't reading gsm card. It used to work but not now.
I am using 5.1 lollipop carbonrom. I even flashed 5.1 update of xt1053 once. So guide me tk make gsm working again
Sent from my Moto X using Tapatalk
ibtisam.arif said:
Hello guys I've moto x verizon rooted and boot loader is unlocked. It isn't developer edition. Sim card doesn't work. I am out of USA (Pakistan) so every network here is GSM. but it isn't reading gsm card. It used to work but not now.
I am using 5.1 lollipop carbonrom. I even flashed 5.1 update of xt1053 once. So guide me tk make gsm working again
Sent from my Moto X using Tapatalk
Click to expand...
Click to collapse
Hi there, first of all you should go to Settings> More networks> Mobile networks, then you hit on roaming and then you select "Always allow data roaming".
If by any chance that doesn't work, try to put the SIM card in another device to make sure it works. BTW how did you unlocked your bootloader? I've the same model as you and I'm having a hard time trying to find a way to unlock my bootloader
ibtisam.arif said:
Hello guys I've moto x verizon rooted and boot loader is unlocked. It isn't developer edition. Sim card doesn't work. I am out of USA (Pakistan) so every network here is GSM. but it isn't reading gsm card. It used to work but not now.
I am using 5.1 lollipop carbonrom. I even flashed 5.1 update of xt1053 once. So guide me tk make gsm working again
Sent from my Moto X using Tapatalk
Click to expand...
Click to collapse
Bump, im also on the same problem. anyone know how to solve this
im still on 4.4.2 btw. havent flashed anything custom
---------- Post added at 08:04 AM ---------- Previous post was at 07:56 AM ----------
siredux said:
Hi there, first of all you should go to Settings> More networks> Mobile networks, then you hit on roaming and then you select "Always allow data roaming".
If by any chance that doesn't work, try to put the SIM card in another device to make sure it works. BTW how did you unlocked your bootloader? I've the same model as you and I'm having a hard time trying to find a way to unlock my bootloader
Click to expand...
Click to collapse
Yes I had tried enabling always allow data roaming and choose the mode at LTE/GSM/UMTS. it still didnt works
have you find the solution? me too in the same case now.after update my xt1060 to verizon lolipop, i cant use my sim card from national provider (indonesia telkomsel):crying:
If you guys from khi i can help
acess denied to send nv range 08378 NV-items_reader_writer and dfs tool
i am trying to unlock moto x sprint
Writing NV-items from a file:
Unsuccessfully written NV-items:
08378 (0x20BA) - Access denied
Done.
Information
Salik Iqbal said:
If you guys from khi i can help
Click to expand...
Click to collapse
Please send me your number
i had xt1056 with sim lock
i flashed 4.4.4 stock sprint rom (sim was also lock there)
i flashed 4.4.2 modem files
then just use nv item reader software & flash all 3 text files (no spc code needed).
got no error .. reboot & all sim worked . 3g 4g worked
yes i am from karachi
I need it solution too... I'm from Karachi.. And why you not share here solution?
- Marhaba Mobile's -
FaizanChauhaan said:
I need it solution too... I'm from Karachi.. And why you not share here solution?
- Marhaba Mobile's -
Click to expand...
Click to collapse
What too share.. Its already on site.
Sent from my XT1058 using XDA-Developers mobile app
Salik Iqbal said:
What too share.. Its already on site.
Sent from my XT1058 using XDA-Developers mobile app
Click to expand...
Click to collapse
I can't search perfect solution.. Moto. X after update sim not detect... Need Solution..
- Marhaba Mobile's -
FaizanChauhaan said:
I can't search perfect solution.. Moto. X after update sim not detect... Need Solution..
- Marhaba Mobile's -
Click to expand...
Click to collapse
What model solution you need?
Salik Iqbal said:
What model solution you need?
Click to expand...
Click to collapse
Moto X XT1060
moto x xt1060
I have a Moto x xt1060, it was working very good in india with airtel but recenty i just put a jio 4g sim to check if it support or not hten when i inserted my airtel sim again there is not network, its says 'sim card is not from verizon wireless' plz help me what to do? in recovery mode it says device is locked status code 0
I have a Moto x xt1060, it was working very good in india with airtel but recenty i just put a jio 4g sim to check if it support or not hten when i inserted my airtel sim again there is not network, its says 'sim card is not from verizon wireless' plz help me what to do? in recovery mode it says device is locked status code 0
ibtisam.arif said:
Hello guys I've moto x verizon rooted and boot loader is unlocked. It isn't developer edition. Sim card doesn't work. I am out of USA (Pakistan) so every network here is GSM. but it isn't reading gsm card. It used to work but not now.
I am using 5.1 lollipop carbonrom. I even flashed 5.1 update of xt1053 once. So guide me tk make gsm working again
Sent from my Moto X using Tapatalk
Click to expand...
Click to collapse
pls help me too i am from pkaistan and i have motox xt1060 verizon invalid sim.
---------- Post added at 06:28 PM ---------- Previous post was at 06:24 PM ----------
Guys i am from pakistan and i have motox xt1060 working properly just i update kitkate to lollipop and there is sim error invalid sim card show.
pls help me.
Hey, I have successfully flashed a Sprint LG V40 v405ua to US firmware 20g but VoLTE is not working. I am on Tmobile network and every time I make a phone call it switches from LTE to H. I heard Tmobile will be moving all phone calls to VoLTE in the middle of 2022. How can I enable VoLTE? Am I missing something? Thanks!
megadrive007 said:
Hey, I have successfully flashed a Sprint LG V40 v405ua to US firmware 20g but VoLTE is not working. I am on Tmobile network and every time I make a phone call it switches from LTE to H. I heard Tmobile will be moving all phone calls to VoLTE in the middle of 2022. How can I enable VoLTE? Am I missing something? Thanks!
Click to expand...
Click to collapse
if you have access to the OP section, try to change it in cust.prop ro.vendor.lge.build.target_operator = OPEN to TMO
megadrive007 said:
Hey, I have successfully flashed a Sprint LG V40 v405ua to US firmware 20g but VoLTE is not working. I am on Tmobile network and every time I make a phone call it switches from LTE to H. I heard Tmobile will be moving all phone calls to VoLTE in the middle of 2022. How can I enable VoLTE? Am I missing something? Thanks!
Click to expand...
Click to collapse
I'd suggest looking at the apn settings. That should be working (volte) without any system modifications.
I checked the APN settings and they are all correct. I am using US firmware version 20g, should I try using an earlier one like 20f? What versions are wokring for you? thanks
megadrive007 said:
I checked the APN settings and they are all correct. I am using US firmware version 20g, should I try using an earlier one like 20f? What versions are wokring for you? thanks
Click to expand...
Click to collapse
I don't have a v40 anymore but remember any version I tried of us open cross flashed to my at&t would work no problem. I remember my carrier mint mobile required you to select 'vowifi' in the account to get that to work. But volte always worked.
you might want to consider joining the v40 tele grp see if they can further assist. Maybe also consider calling t-mo, re your account may not be provisioned for volte? Not sure that's even possible but why not check anyway?
If it is like AT&T does whitelisting, ROM does not matter, but IMEI.