i found a moto X developer and will this work on the att network and i hope someone can help me out?
GSM/GPRS/EDGE 850/900/1800/1900 (Quadband) UMTS 850/900/1900/2100
According to this page: http://en.wikipedia.org/wiki/Moto_X#Variants
The Moto X model XT-1053 is the unlocked Developer Edition phone and does work on AT&T. The bands area also listed there.
thank for the help.
So i have to download the moto X developer image for att right?
perlsyntax said:
thank for the help.
So i have to download the moto X developer image for att right?
Click to expand...
Click to collapse
Yes that appears to be correct. I do not have a Developer Edition, but there is only one set of images for Verizon, which does have a DE device available. The firmware is the same, to my understanding, but the bootloader is able to be unlocked officially via the Motorola website.
Here are the firmwares you'll want. Ensure that if you pick one, you can only go UP in version, not down. So verify which version is on the phone first. You can only flash that version or a higher version (upgrading) but cannot downgrade to an older version. That will cause problems.
http://sbf.droid-developers.org/phone.php?device=0
Edit
Nemosfate said:
You want one of these UNLESS you're on 4.4.4 then you'll have to get it from Motorola.
I have the xt1053 developers edition and it works just fine on at&t , that's what I'm using
root, roms, and themes.. oh my!
Click to expand...
Click to collapse
What about the XT1060DEV is this the Verzion phone or the gsm one?
perlsyntax said:
What about the XT1060DEV is this the Verzion phone or the gsm one?
Click to expand...
Click to collapse
XT1060 is the model for Verizon.
Google what bands it uses. Then compare to what at&t uses. I've seen in here people using it on tmo Idk about at&t. As far as which version to mix with your phone I'll bow out to someone with more experience with that
Edit: and next time you post make sure you put what MODEL phone you have and the software version. Would've saved some time possibly.
root, roms, and themes.. oh my!
Nemosfate said:
Google what bands it uses. Then compare to what at&t uses. I've seen in here people using it on tmo Idk about at&t. As far as which version to mix with your phone I'll bow out to someone with more experience with that
Edit: and next time you post make sure you put what MODEL phone you have and the software version. Would've saved some time possibly.
root, roms, and themes.. oh my!
Click to expand...
Click to collapse
Sorry about that.I hear the samething it work with t-mobile.
No problem.. And I know there's a thread somewhere with this info in it.. So a search and see if you can find it.. Good luck
root, roms, and themes.. oh my!
Related
I have a soft-bricked Moto X XT1055-DE (GSM Developer Edition) that I can boot into fastboot with, and that's it. Does anybody know where the stock Firmware files are for this device? The host I was using had them yanked down.
trevorftard said:
I have a soft-bricked Moto X XT1055-DE (GSM Developer Edition) that I can boot into fastboot with, and that's it. Does anybody know where the stock Firmware files are for this device? The host I was using had them yanked down.
Click to expand...
Click to collapse
{UPDATE}
I have located another source for the firmware files here: https://motorola-global-portal.custhelp.com/app/standalone/bootloader/recovery-images
They must be requested, but they'll give them to you after making you wait.
trevorftard said:
I have a soft-bricked Moto X XT1055-DE (GSM Developer Edition) ...
Click to expand...
Click to collapse
Is this a typo? I believe that the GSM developer edition is XT1053...
jhedfors said:
Is this a typo? I believe that the GSM developer edition is XT1053...
Click to expand...
Click to collapse
No, it's not. The idiots at Moto Care seemed to want to brick my phone. They told me THAT was the model number, but now I know better.
trevorftard said:
No, it's not. The idiots at Moto Care seemed to want to brick my phone. They told me THAT was the model number, but now I know better.
Click to expand...
Click to collapse
I think there is an XT1053 and XT1055 GSM Dev Edition.
Btw, the GSM Dev image that you can download from the motorola link above is for the XT1053, I don't know if you noticed from the file name.
But I believe the hardware of all Moto X models is the same, it's just the software that's different. I'm running the XT1053 image on my XT1058 and it works fine.
mschumacher69 said:
I think there is an XT1053 and XT1055 GSM Dev Edition.
Btw, the GSM Dev image that you can download from the motorola link above is for the XT1053, I don't know if you noticed from the file name.
But I believe the hardware of all Moto X models is the same, it's just the software that's different. I'm running the XT1053 image on my XT1058 and it works fine.
Click to expand...
Click to collapse
XT1055 is US Cellular. GSM Dev & T Mobile are the same model number.
RenSoAbrupt said:
XT1055 is US Cellular. GSM Dev & T Mobile are the same model number.
Click to expand...
Click to collapse
https://motorola-global-portal.custhelp.com/app/software-upgrade-news/g_id/1949/action/auth
Select OTHER CARRIER OR RETAIL, you would see a Moto X - DE (XT1055).
This suggests that there is an XT1055 DE as well...
Thanks for your help. I noticed after taking my Moto X out of the case that the model number is glazed on the bottom. It is, in fact, the XT1053.
trevorftard said:
Thanks for your help. I noticed after taking my Moto X out of the case that the model number is glazed on the bottom. It is, in fact, the XT1053.
Click to expand...
Click to collapse
So what made u think it's an XT1055?
Good ol' Moto Care told me it was.
Sent from my XT1053 using xda app-developers app
moto x
hi guys ,who can telle if moto xt1055 can work on gsm ???please ,in my country i can use olnly gsm,tnx befor
I was searching for AT&T roms, and came across this website http://wiki.cyanogenmod.org/w/Build_for_xt1058. It looks like it tells you how to unlock the bootloader for AT&T and non us GSM phones. Has anyone tried this. Is this how to unlock the bootloader on the att moto x so we can install roms. I figured I'd ask before I brick my phone trying it.
Thanks
ski21 said:
I was searching for AT&T roms, and came across this website http://wiki.cyanogenmod.org/w/Build_for_xt1058. It looks like it tells you how to unlock the bootloader for AT&T and non us GSM phones. Has anyone tried this. Is this how to unlock the bootloader on the att moto x so we can install roms. I figured I'd ask before I brick my phone trying it.
Thanks
Click to expand...
Click to collapse
Unless you have the at&t developer edition you can not unlock your bootloader. You must go to the Motorola bootloader unlocking website to get a unlocking code
Sent on my Moto X
Crap, don't have the developer edition. Oh well. I'm glad I asked first. Thanks.
flashallthetime said:
You must go to the Motorola bootloader unlocking website to get a unlocking code
Sent on my Moto X
Click to expand...
Click to collapse
Only if he has a US Cellular, TMo, or Sprint variant.
nhizzat said:
Only if he has a US Cellular, TMo, or Sprint variant.
Click to expand...
Click to collapse
Or a Dev edition like he said in the fist part of his post that you deleted from the quote.
Sent from my XT1060
ski21 said:
I was searching for AT&T roms, and came across this website http://wiki.cyanogenmod.org/w/Build_for_xt1058. It looks like it tells you how to unlock the bootloader for AT&T and non us GSM phones. Has anyone tried this. Is this how to unlock the bootloader on the att moto x so we can install roms. I figured I'd ask before I brick my phone trying it.
Thanks
Click to expand...
Click to collapse
Schaweet said:
Or a Dev edition like he said in the fist part of his post that you deleted from the quote.
Sent from my XT1060
Click to expand...
Click to collapse
Come again?
nhizzat said:
Come again?
Click to expand...
Click to collapse
Um that's not the post you quoted. He said unless you have an AT&T Dev edition.
Anyway, doesn't matter.
Sent from my XT1060
I recently purchased a moto x developers edition and can't get mobile data working. My provider is AT&T. I have no access point names in my settings and can't find it anywhere. Any input???
questions go in Q&A
http://apn-settings.com/us/att-apn-settings/
---------- Post added at 09:03 PM ---------- Previous post was at 08:59 PM ----------
http://apn-settings.com/us/att-apn-settings/
Hello all,
I am about to take the plug in the Moto X world and have a couple questions. I live in the Great White North (i.e. Canada) so the only available version I can easily get my hands on is the Rogers version. My question is will I be able to use it on Rogers if I flash the Developer edition ROM. Will the developer edition ROM even work on a Rogers Moto X?
Thanks and much appreciated!
Yes, it will work fine as long as you have unlocked the bootloader. You will lose band 7 LTE (2600 Mhz) if you use the full developer edition firmware however you can flash the developer edition firmware and then flash just the modem from the Brazil 4.4 release and it will be restored. This is what I have been running for a while now on two Rogers XT1058s and it is working extremely well. Mine are sim unlocked and running on Koodo.
Thanks for the info! Sorry to ask such a noob question but where can I download the Dev edition firmware? I can't seem to find it. Also can you let me know where I can get the Brazil modem?
Much appreciated!!
Steve-x said:
Yes, it will work fine as long as you have unlocked the bootloader. You will lose band 7 LTE (2600 Mhz) if you use the full developer edition firmware however you can flash the developer edition firmware and then flash just the modem from the Brazil 4.4 release and it will be restored. This is what I have been running for a while now on two Rogers XT1058s and it is working extremely well. Mine are sim unlocked and running on Koodo.
Click to expand...
Click to collapse
Just curious, why would you need the dev edition ROM on the Rogers X? It has an unlockable bootloader, is extremely easy to root, and you can remove any extra apps Rogers puts on it? What's the advantage to using the dev edition ROM?
Sent from my LG-E971 using Tapatalk
g8who said:
Thanks for the info! Sorry to ask such a noob question but where can I download the Dev edition firmware? I can't seem to find it. Also can you let me know where I can get the Brazil modem?
Much appreciated!!
Click to expand...
Click to collapse
Here's the Dev edition firmware i.e. T-Mobile (Developer Edition GSM) - XT1053:
http://forum.xda-developers.com/showthread.php?t=2538394
Brazil modem can be found in this thread:
http://forum.xda-developers.com/showthread.php?t=2630107
Hi everyone, I've been a following XDA for a while i've unlocked, rooted, flashed roms, etc., many times,
But this time i am not sure how to proceed. [I'm also a beginner... but I'm looking forward to contribute in the near future]
You see, I bought a Brand New Sprint Moto X , never been activated on any carrier, it arriving on Monday tops.
I already know how to unlock it, root it, and flash a custom rom.
but want to be able to unlock the gsm capabilities of the phone to use internationally, i know sprint offers this service but i don't qualify because i need to be 3 months in service whit them.
on the other hand i read in the General Section , in the model description:
XT1049 - Republic Wireless
XT1052 - European - Sim ?
XT1053 -T-Mobile US, Dev Ed
XT1055 - US Cellular - Sim ?
XT1056 - Sprint - Sim Unlocked
XT1058 - AT&T, Rogers, Claro, Movistar, Vivo, Oi, TIM - Sim Unlocked
XT1060 - Verizon - Sim Locked
What does it mean being "Sim Unlocked"
While i be able to use it on A GSM service (Mexico)
if not, could a posible solution be flashing the SFB for Telcel to my Sprint phone?
or will i just hard brick it?
Thank you very much for your attention.
Eddie
Didn't know the XT1053 was the Developer Edition, that's cool to know.
I'll be pending to this post.
Best
xphoneuser said:
Hi everyone, I've been a following XDA for a while i've unlocked, rooted, flashed roms, etc., many times,
But this time i am not sure how to proceed. [I'm also a beginner... but I'm looking forward to contribute in the near future]
You see, I bought a Brand New Sprint Moto X , never been activated on any carrier, it arriving on Monday tops.
I already know how to unlock it, root it, and flash a custom rom.
but want to be able to unlock the gsm capabilities of the phone to use internationally, i know sprint offers this service but i don't qualify because i need to be 3 months in service whit them.
on the other hand i read in the General Section , in the model description:
XT1049 - Republic Wireless
XT1052 - European - Sim ?
XT1053 -T-Mobile US, Dev Ed
XT1055 - US Cellular - Sim ?
XT1056 - Sprint - Sim Unlocked
XT1058 - AT&T, Rogers, Claro, Movistar, Vivo, Oi, TIM - Sim Unlocked
XT1060 - Verizon - Sim Locked
What does it mean being "Sim Unlocked"
While i be able to use it on A GSM service (Mexico)
if not, could a posible solution be flashing the SFB for Telcel to my Sprint phone?
or will i just hard brick it?
Thank you very much for your attention.
Eddie
Click to expand...
Click to collapse
Sorry it won't work...at least not yet. But it appears you already found the relevant thread on SIM-Unlock for Sprint Moto X.
samwathegreat said:
Sorry it won't work...at least not yet. But it appears you already found the relevant thread on SIM-Unlock for Sprint Moto X.
Click to expand...
Click to collapse
hi, thank you!,
what about flashing a Telcel SFB file trough rsd lite?,
xphoneuser said:
hi, thank you!,
what about flashing a Telcel SFB file trough rsd lite?,
Click to expand...
Click to collapse
Its been tried. Flashing the SBF itself will work, but the phone will still be sim-locked and unusable on GSM.
Thank you!!
samwathegreat said:
Its been tried. Flashing the SBF itself will work, but the phone will still be sim-locked and unusable on GSM.
Click to expand...
Click to collapse
I understand now, reading a lot on the other threads and in other sites it now undrstand that sim unlock cannot be done unless i have service for 3 months or a fix comes [hopefully soon].
thank you.
just before we close this thread..
what if i flash an SFB of a CDMA carrier here, will it work? or will i have to reprogram the phone [ using this method http://forum.xda-developers.com/moto-x/general/guide-flash-sprint-moto-x-to-page-plus-t2732342 but using my cdma carrier PRL) ????
is this the right place to post this last question?
sorry, and thanks again.
Eddie
xphoneuser said:
I understand now, reading a lot on the other threads and in other sites it now undrstand that sim unlock cannot be done unless i have service for 3 months or a fix comes [hopefully soon].
thank you.
just before we close this thread..
what if i flash an SFB of a CDMA carrier here, will it work? or will i have to reprogram the phone [ using this method http://forum.xda-developers.com/moto-x/general/guide-flash-sprint-moto-x-to-page-plus-t2732342 but using my cdma carrier PRL) ????
is this the right place to post this last question?
sorry, and thanks again.
Eddie
Click to expand...
Click to collapse
Eddie,
Yes, you will need to follow the instructions in the "Flash Sprint Moto X to Page Plus" thread. You will need to change some of the steps as appropriate to YOUR carrier you are flashing to since not all steps will be the same as flashing to "Page Plus". Flashing a CDMA Rom will not work. AFAIK, the only other CDMA ROM available is the Verizon one which prevents you from being able to flash to another carrier. Does anyone know of any others?
Good Luck
samwathegreat said:
Eddie,
Yes, you will need to follow the instructions in the "Flash Sprint Moto X to Page Plus" thread. You will need to change some of the steps as appropriate to YOUR carrier you are flashing to since not all steps will be the same as flashing to "Page Plus". Flashing a CDMA Rom will not work. AFAIK, the only other CDMA ROM available is the Verizon one which prevents you from being able to flash to another carrier. Does anyone know of any others?
Good Luck
Click to expand...
Click to collapse
hey, thank you i read in other spanish forums that cdma acivating in iusacell carrier (mx) is confirmed posible.
if its a clean esn i think i dont even need to unlock the bootloader, i dont know.
phone is arriving on monday ill post any results and if im succesfull i will make a guide for those in mi shoes.
thanks again.
I have a Telus XT1097. I know that without having a root method atm it is still just speculation but are we aware of any hardware differences or other issues that would make a convert to pure edition (xt1095) impossible?
Thanks in advance!
Jeremie
Jercote said:
I have a Telus XT1097. I know that without having a root method atm it is still just speculation but are we aware of any hardware differences or other issues that would make a convert to pure edition (xt1095) impossible?
Thanks in advance!
Jeremie
Click to expand...
Click to collapse
Have you tried unlocking your bootloader? It seems to me the Telus version is pretty much a Pure Edition, except for the model number... BTW does it have any TELUS bloatware at all?
FYI I believe the 1095 has different frequency bands.
Sent from my Moto X
I have not because as far as i understood the method was exclusively for the xt1095 but I'll give it a shot.
As far as bloatware, the only thing Telus installed on this phone is their "My Account" app. It's an app that you can download from the play store.
It's interesting to see the marketing used on Telus' website to describe the Moto X. The catchphrases are: "Pure Style, Pure performance" and then "Pure Android with the quickest updates". It leads me to believe that Telus will pretty much push out updates as they recieve them from Moto.
I'll be less inclined to root and flash if I see that I get timely updates, after using galaxy phones and flashing for the past 5 years i just want something that works great or of the box.
Regards,
Jeremie
johnny grep said:
Have you tried unlocking your bootloader? It seems to me the Telus version is pretty much a Pure Edition, except for the model number... BTW does it have any TELUS bloatware at all?
FYI I believe the 1095 has different frequency bands.
Sent from my Moto X
Click to expand...
Click to collapse
Jercote said:
I have not because as far as i understood the method was exclusively for the xt1095 but I'll give it a shot.
As far as bloatware, the only thing Telus installed on this phone is their "My Account" app. It's an app that you can download from the play store.
It's interesting to see the marketing used on Telus' website to describe the Moto X. The catchphrases are: "Pure Style, Pure performance" and then "Pure Android with the quickest updates". It leads me to believe that Telus will pretty much push out updates as they recieve them from Moto.
I'll be less inclined to root and flash if I see that I get timely updates, after using galaxy phones and flashing for the past 5 years i just want something that works great or of the box.
Regards,
Jeremie
Click to expand...
Click to collapse
I have a brazilian version, also model XT1097 from carrier Vivo and I was able to unlock the bootloader and root it normally. Would like to know the difference between the XT1095 and XT1097 though.
Jercote said:
I have not because as far as i understood the method was exclusively for the xt1095 but I'll give it a shot.
Click to expand...
Click to collapse
I have XT1093 (US Cellular). The Pure Edition root method works for all variants with unlockable bootloaders. The key is to follow the directions completely. As it only BOOTS the system image rather than INSTALLS the image, it works fine. Boots the image once, installs SU to your system, then reboots to your system.
Jercote said:
I have a Telus XT1097. I know that without having a root method atm it is still just speculation but are we aware of any hardware differences or other issues that would make a convert to pure edition (xt1095) impossible?
Thanks in advance!
Jeremie
Click to expand...
Click to collapse
hey, I was thinking of getting a Moto X, and was wondering, is the one sold at Telus 16 or 32 GB?
oxxshadow said:
hey, I was thinking of getting a Moto X, and was wondering, is the one sold at Telus 16 or 32 GB?
Click to expand...
Click to collapse
Only the 16GB
I thought I was getting a Pure Edition when I bought the unlocked version from Motorola's mexican website, but I got the xt1097... if this is possible that would be great as I believe the pure edition will get updates faster
Could anybody supply the modem for the Telus xt1097? I converted my phone and forgot to backup the modem.
plasticdarlow said:
Could anybody supply the modem for the Telus xt1097? I converted my phone and forgot to backup the modem.
Click to expand...
Click to collapse
I have the xt1097, if you can help me do it I will send you the modem for it.
Jercote said:
I have a Telus XT1097. I know that without having a root method atm it is still just speculation but are we aware of any hardware differences or other issues that would make a convert to pure edition (xt1095) impossible?
Thanks in advance!
Jeremie
Click to expand...
Click to collapse
Methodikull said:
I have the xt1097, if you can help me do it I will send you the modem for it.
Click to expand...
Click to collapse
Sure thing,
I used the multitool to flash that Pure Edition Moto X 2014 (XT1095) ROM (full wipe)
Then flashed ATT Modem (downloaded from graffixnyc website)
Then sidloaded OTA update
Then restored my EFS from my TWRP backup.
Everything booted up fine, except I don't have a cell signal. It asks me for a SIM network unlock PIN. I'm stuck here.... I want to try and flash the telus modem. Not sure why it's asking for a SIM unlock PIN.
I mean how can I back up the modem file for you
Sent from my XT1097 using XDA Free mobile app
Methodikull said:
I mean how can I back up the modem file for you
Sent from my XT1097 using XDA Free mobile app
Click to expand...
Click to collapse
not exactly sure how
---------- Post added at 05:05 PM ---------- Previous post was at 04:27 PM ----------
UPDATE:
I flashed the modem from the multitool and I have Data again.
338lm said:
Official factory image is now available from Motorola! https://motorola-global-portal.custhelp.com/app/standalone/bootloader/recovery-images
Click to expand...
Click to collapse
Give it a try now!
It was asking you for unlocking cuz Att modem is sim locked.
So did you manage to successfully convert to 1095? I'd like to try, but I'm a bit worried about the modem issues, I'd need a sim unlocked modem i can use with Brazilian operators.
I'm a noob in moto x developing, so I'm already reading what multitool is and how-to's.
Moto X (2nd Gen) XT-1097
Samsung Galaxy Note 10.1 (2012) N-8000
Sent from the XDA mobile app.
plasticdarlow said:
Sure thing,
I used the multitool to flash that Pure Edition Moto X 2014 (XT1095) ROM (full wipe)
Then flashed ATT Modem (downloaded from graffixnyc website)
Then sidloaded OTA update
Then restored my EFS from my TWRP backup.
Everything booted up fine, except I don't have a cell signal. It asks me for a SIM network unlock PIN. I'm stuck here.... I want to try and flash the telus modem. Not sure why it's asking for a SIM unlock PIN.
Click to expand...
Click to collapse
Any luck getting your phone working? You have an XT1097 right?
Hey guys,
Telus XT1097 user here.
Trying to flash back to stock so I can get some lollipop action.
Which factory image should I be installing here ? I don't think our phones are dev editions / pure editions...
Thanks !
Here is everything you need guys.
http://www.techtastic.nl/android/motorola/installeer-android-5-0-lollipop-op-de-moto-x-xt1092/
It's in Dutch but gives you step by step instructions how to backup your modem and restore it using dd commands. A google translate should suffice.
I have a 1097, but i haven't done anything yet, i don't wanna mess up my brand new phone LOL
i'm reading about the changes to 1095 and mostly the modem issue.
floepie said:
Here is everything you need guys.
http://www.techtastic.nl/android/motorola/installeer-android-5-0-lollipop-op-de-moto-x-xt1092/
It's in Dutch but gives you step by step instructions how to backup your modem and restore it using dd commands. A google translate should suffice.
Click to expand...
Click to collapse
I wonder if that only works on some XT1097 phones, I got a "Permission Denied" error when I tried it on mine.