Got a Red screen on my kindle fire hd 7", anyone know where I can get a genuine factory cable as I have heard of people ordering one only to find it is just an ordinary cable and not a factory cable, I am in the uk (Scotland)...
PS now total brick...
If you have a Samsung cable you can build one... It has the pins to short together..
Sent from my XT907 using XDA Free mobile app
Kindle fir 7 hd red screen
ok cable will be here on Saturday...Which of these programmes should I use to recover my lindle fire hd 7" from red screen?
Now Total Brick
red screen and now seems total brick
ok used factory cable to recover my kindle fire hd 7" from red screen?
Plugged in cable connected to pc and kindle screen displayed fastboot..all well so far..
Then I used this programme KFFirstAide and used
option 3. Completly Restore the KFHD 7 7.2.3 (Fastboot)
pressed return on pc then programme started then said rebooting kindle, kindle screen went black (no fastboot logo anymore) and it stayed black left it for ages and it did not come on again, eventually I removed kindle fire hd 7 from pc and tried to swith on but nothing happened I tried to connect it to pc again with fastboot cable and nothing happened pc did not recognise it,tried the same with cable that came with kindle and nothing happened. Have tried with no cables connected and nothing. have tried holding power button for 20 seconds then push power button again for 2 seconds but nothing happens still black screen...help is my kindle fire hd7 a total brick...
Not all hope is lost...
Sent from my ASUS_T00I using XDA Free mobile app
I also had Red Screen on my KFHD 7" and need some help. I made a factory cable today and when I plug it in it goes to Fastboot screen. I running Win7 64 and have installed Java SDK and Android SDK and I also installed adb usb drivers from Kindle Fire Utility. However device manager shows it under Other Devices as Tate-PVT-08 and when running KF SRT it just shows "waiting for device" and never changes. I have verified that adb_usb.ini has 0x1949. I've been at this for some time now and I don't know what else to try. I think it may be permanently bricked. I appreciate any suggestions.
phildafunk said:
I also had Red Screen on my KFHD 7" and need some help. I made a factory cable today and when I plug it in it goes to Fastboot screen. I running Win7 64 and have installed Java SDK and Android SDK and I also installed adb usb drivers from Kindle Fire Utility. However device manager shows it under Other Devices as Tate-PVT-08 and when running KF SRT it just shows "waiting for device" and never changes. I have verified that adb_usb.ini has 0x1949. I've been at this for some time now and I don't know what else to try. I think it may be permanently bricked. I appreciate any suggestions.
Click to expand...
Click to collapse
SUCCESS! I was finally able to fix my RSOD. Here is what I did.
1. Opened up Android Studio and SDK Manager.
2. Selected Tools and Manage Add-on Sites.
3 Select User Defined Sites tab and click New and enter.... Sorry, I'm a new user and not allowed to post URL's yet. Search for "Amazon Setting Up Your Development Environment" and url will be under "Installing the Amazon Fire TV SDK Add-on" section.
4. Then scroll down in Manager window and expand Extras then select and install Amazon Kindle Fire USB Driver packages.
5. Connect Kindle with factory cable and open Device Manager, right click on Tate-PVT-08 and select Update Driver.
6. Browse Computer for driver, and select Let Me Pick..., then scroll down and you should now have Kindle Driver available (I didn't have this before).
7. Select Android Composite ADB Interface.
8. Run SR Tool and I had to first select 1 to Restore-Factory Rooted with SuperSU.apk, kept fingers crossed and it finished. (But still had RSOD)
9. Then ran SR Tool again and select 3 for Restore-Factory Recover.
10. Disconnect and cycle power to Kindle and was prompted with a screen saying there was a booting problem and had to Reset to Factory defaults. After that it booted up as new!!!
hard bricked kindle fire hd 7
orgal said:
ok used factory cable to recover my kindle fire hd 7" from red screen?
Plugged in cable connected to pc and kindle screen displayed fastboot..all well so far..
Then I used this programme KFFirstAide and used
option 3. Completly Restore the KFHD 7 7.2.3 (Fastboot)
pressed return on pc then programme started then said rebooting kindle, kindle screen went black (no fastboot logo anymore) and it stayed black left it for ages and it did not come on again, eventually I removed kindle fire hd 7 from pc and tried to swith on but nothing happened I tried to connect it to pc again with fastboot cable and nothing happened pc did not recognise it,tried the same with cable that came with kindle and nothing happened. Have tried with no cables connected and nothing. have tried holding power button for 20 seconds then push power button again for 2 seconds but nothing happens still black screen...help is my kindle fire hd7 a total brick...
Click to expand...
Click to collapse
Just found my kindle fire hd 7" again after moving house, above is what I did and the state kindle fire hd 7" is in now IE:- total brick...
Is there any way of recovering this
Related
Can the Kindle Fire HD be unbricked using Rekindle-01, if so where do i short out the USB on the motherboard as the pics online do not help as they are for the Kindle Fire motherboard
what's the issue??? Does anything happen when you press the power button? Plus you might need a factory cable to get it working again.
Sent from my KFTT using xda app-developers app
tmthrash said:
what's the issue??? Does anything happen when you press the power button? Plus you might need a factory cable to get it working again.
Sent from my KFTT using xda app-developers app
Click to expand...
Click to collapse
I rooted the Kindle Fire HD with KFU 0.9.6, all went okay until it tried rebooting into recovery as part of the process and it hasn't turned on since ie nothing comes on the screen.
I have a Factory Cable but that isn't putting Kindle into Fastboot, ADB isn't seeing the device so am now trying via Rekindle via Ubuntu/Linux, this requires the USB to be shorted out to jump start the port but i don't know which connection on the motherboard to short out as the only pic online is for the KF not KFHD.
http://forum.xda-developers.com/showthread.php?t=1405052
I believe it should only be soft bricked but can get no response from it so any help would be great.
The Kindle Fire Unbricker is useless, it even tells me my Kindle is now unbricked even when it is not plugged in. My ADB drivers are fine and i even had the SDK installed with all various drivers it brings to the party.
Sorry if i sound such a noob but i have done various PSP's, Wii's, iTouch, fixed Laptops etc but this has me totally screwed
FatedBoot said:
I rooted the Kindle Fire HD with KFU 0.9.6, all went okay until it tried rebooting into recovery as part of the process and it hasn't turned on since ie nothing comes on the screen.
I have a Factory Cable but that isn't putting Kindle into Fastboot, ADB isn't seeing the device so am now trying via Rekindle via Ubuntu/Linux, this requires the USB to be shorted out to jump start the port but i don't know which connection on the motherboard to short out as the only pic online is for the KF not KFHD.
http://forum.xda-developers.com/showthread.php?t=1405052
I believe it should only be soft bricked but can get no response from it so any help would be great.
The Kindle Fire Unbricker is useless, it even tells me my Kindle is now unbricked even when it is not plugged in. My ADB drivers are fine and i even had the SDK installed with all various drivers it brings to the party.
Sorry if i sound such a noob but i have done various PSP's, Wii's, iTouch, fixed Laptops etc but this has me totally screwed
Click to expand...
Click to collapse
First of all the tools/utilities you are using are for first gen KF, so that is why it bricked your device and why the other does not work. You need to flash a backup through fastboot. As for getting into fastboot , which device do you have? 7 or 8.9? On 7" power off the device, plug into pc with factory cable. If you have 8.9 you have to power off, use a fastboot cmd then power on while pc is waiting for device. Look in the development section, it has all the info you need to unbrick. Do not try the tools you mentioned, there is no need to open the device up to do any of this.
onemeila said:
First of all the tools/utilities you are using are for first gen KF, so that is why it bricked your device and why the other does not work. You need to flash a backup through fastboot. As for getting into fastboot , which device do you have? 7 or 8.9? On 7" power off the device, plug into pc with factory cable. If you have 8.9 you have to power off, use a fastboot cmd then power on while pc is waiting for device. Look in the development section, it has all the info you need to unbrick. Do not try the tools you mentioned, there is no need to open the device up to do any of this.
Click to expand...
Click to collapse
Still no response, thanks for the advice you gave me, i will try another Factory Cable, maybe mine is damaged in some way.
FatedBoot said:
Still no response, thanks for the advice you gave me, i will try another Factory Cable, maybe mine is damaged in some way.
Click to expand...
Click to collapse
Have you had any success?
A similar thing happened to me.
I have a factory cable that I got from [2012androidfans on ebay]. It doesn't seem to do anything. I get no response from the Kindle Fire HD. Windows detects nothing.
(I installed a bootloader meant for a first gen kindle. I was blindly following a guide to update android and wasn't thinking what I was doing. Restarted the Kindle HD 7". Nothing.)
Kindle Fire HD Recovery
ItotheSecond said:
Have you had any success?
A similar thing happened to me.
I have a factory cable that I got from [2012androidfans on ebay]. It doesn't seem to do anything. I get no response from the Kindle Fire HD. Windows detects nothing.
(I installed a bootloader meant for a first gen kindle. I was blindly following a guide to update android and wasn't thinking what I was doing. Restarted the Kindle HD 7". Nothing.)
Click to expand...
Click to collapse
The cable we use on the Kindle Fire HD is
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You may also purchase a cable here: http://shop.teamblackhat.info/Factory-style-programming-cable-for-Motorola-FactCable.htm
When you plug in the correct USB Factory Cable, the Kindle will boot in Fastboot Mode.
You will know you are in Fastboot, if the cable did the trick it will be very obvious.
Once you are in Fastboot, then use http://forum.xda-developers.com/showthread.php?t=1951254 to recover the Kindle. We are in the middle of creating a
step-by-step How to backup a healthy Kindle and create a backup recovery of YOUR
Kindle HD 7" Fire.
We also offer a Kindle recovery service for a very small fee. PM us if you would like to
explore this option.
prokennexusa said:
The cable we use on the Kindle Fire HD is
You may also purchase a cable here: http://shop.teamblackhat.info/Factory-style-programming-cable-for-Motorola-FactCable.htm
When you plug in the correct USB Factory Cable, the Kindle will boot in Fastboot Mode.
You will know you are in Fastboot, if the cable did the trick it will be very obvious.
Once you are in Fastboot, then use http://forum.xda-developers.com/showthread.php?t=1951254 to recover the Kindle. We are in the middle of creating a
step-by-step How to backup a healthy Kindle and create a backup recovery of YOUR
Kindle HD 7" Fire.
We also offer a Kindle recovery service for a very small fee. PM us if you would like to
explore this option.
Click to expand...
Click to collapse
Well, Add me to the list. This is the first device I have actually ever bricked. I already had the KFU utility installed and accidentally ran the wrong batch file Im thinking it overwrote the factory boot/recovery partitions. I have a factory cable and its not showing anything under device manager upon plugging it in. Ive held the power down for 30 seconds, then plugged it in, but nothing shows. The sucky part is that its not mine, its a coworkers...... frustrating. Is there a way to fix it at this point?
Edit,
Its an HD 8.9 Inch
Kindle Fire First Aide
FatedBoot said:
Can the Kindle Fire HD be unbricked using Rekindle-01, if so where do i short out the USB on the motherboard as the pics online do not help as they are for the Kindle Fire motherboard
Click to expand...
Click to collapse
FatedBoot,
The utility Rekindle is design for the original Kindle only. If you are looking to restore you Kindle HD 7, Kindle HD 8.9 or the Kindle 2 you may use our utility that takes about 3 to 5 minutes to restore the Kindle. Here is a link to Kindle Fire First Aide: http://forum.xda-developers.com/showthread.php?t=2096888
If you would like information about making your own Factory USB Cable, the information can be found here on Post Number 164: http://forum.xda-developers.com/showpost.php?p=37187390&postcount=164
This pictures to solder the board are for the original Kindle not the new Kindles. Finally, you do NOT want to solder the board on these models since every time you plug in to change the device, it will boot into Fastboot.
We have full site and phone support, so if you find yourself stuck, just post a question or if you have a serious problem, give us a call.
---------- Post added at 11:51 AM ---------- Previous post was at 11:42 AM ----------
pyraxiate said:
Well, Add me to the list. This is the first device I have actually ever bricked. I already had the KFU utility installed and accidentally ran the wrong batch file Im thinking it overwrote the factory boot/recovery partitions. I have a factory cable and its not showing anything under device manager upon plugging it in. Ive held the power down for 30 seconds, then plugged it in, but nothing shows. The sucky part is that its not mine, its a coworkers...... frustrating. Is there a way to fix it at this point?
Edit,
Its an HD 8.9 Inch
Click to expand...
Click to collapse
pyraxiate,
Sounds like you are well versed in this topic. You are correct, the boot and recovery partitions need to be recovered.
You have several choices to recover the device, you may use onemeila tool here: http://forum.xda-developers.com/showthread.php?t=2011126
OR
Our tool here: http://forum.xda-developers.com/showthread.php?t=2069117
They both accomplish the same task in the end. There are known Bootloader issues with the Kindle Fire HD 8.9" so if you find yourself in an endless boot-loop, read our posts on how to recover the loop. Our tool automated the Boot-loop recovery. You will receive solid support on either tool.
I bricked the kindle fire hd 7in while trying to flash the newest android to it (used wrong bootloader). Anyway, when I start the kindle, it shows the first white/orange kindle fire logo, then it crashes to a black screen. When I plug in the factory cable, it shows the kindle fire logo and then goes to a logo that actually says "fastboot" with "kindle fire" under that, but then nothing happens. The device is not recognized by adb, but it has before, because i rooted it earlier. I can't get any unbricking utilities to work because the computer won't recognize it. How do I get my kindle to be recognized so that I can at least restore it?
mharlan95 said:
I bricked the kindle fire hd 7in while trying to flash the newest android to it (used wrong bootloader). Anyway, when I start the kindle, it shows the first white/orange kindle fire logo, then it crashes to a black screen. When I plug in the factory cable, it shows the kindle fire logo and then goes to a logo that actually says "fastboot" with "kindle fire" under that, but then nothing happens. The device is not recognized by adb, but it has before, because i rooted it earlier. I can't get any unbricking utilities to work because the computer won't recognize it. How do I get my kindle to be recognized so that I can at least restore it?
Click to expand...
Click to collapse
Well you apparently didn't succeed in flashing the bootloader. It seems like you just installed an unsigned kernel so you are in better shape than most. Try Onemelia's system restore tool to see if that works. If not, you may have to restore the stock recovery as well.
Sent from my KFHD 8.9 using Tapatalk 2
ItotheSecond said:
Have you had any success?
A similar thing happened to me.
I have a factory cable that I got from [2012androidfans on ebay]. It doesn't seem to do anything. I get no response from the Kindle Fire HD. Windows detects nothing.
(I installed a bootloader meant for a first gen kindle. I was blindly following a guide to update android and wasn't thinking what I was doing. Restarted the Kindle HD 7". Nothing.)
Click to expand...
Click to collapse
No joy at all, just bought a new Factory Cable and still no response what so ever. I am as far as i can go now with no real experience on KF's. I even tried KF First Aide in conjunction with a Factory Cable and still nothing so where to go from here?
What is the condition of your battery? Charging port?
Sent from my KFHD using xda premium
Bricked Kindle fire hd 7
i have a kindle fire hd 7 that i got as a store display
it was in a wierd demo loop so i tried to root it
i made my own factory cable and got it to go into fastboot then i tried running kind fire utilities to root the device and it failed and shut down.
Now it wont boot and even with the factory cable plugged in to the computer i get nothing i have taken it apart and pulled the battery but still nothing. im stuck now and could really use some help. this is my first kindle ever and its not going well.
thank you for all the help in advance.
alin2em said:
i have a kindle fire hd 7 that i got as a store display
it was in a wierd demo loop so i tried to root it
i made my own factory cable and got it to go into fastboot then i tried running kind fire utilities to root the device and it failed and shut down.
Now it wont boot and even with the factory cable plugged in to the computer i get nothing i have taken it apart and pulled the battery but still nothing. im stuck now and could really use some help. this is my first kindle ever and its not going well.
thank you for all the help in advance.
Click to expand...
Click to collapse
Problem your see here :
http://forum.xda-developers.com/showthread.php?t=1951254
FatedBoot said:
No joy at all, just bought a new Factory Cable and still no response what so ever. I am as far as i can go now with no real experience on KF's. I even tried KF First Aide in conjunction with a Factory Cable and still nothing so where to go from here?
Click to expand...
Click to collapse
I literally just solved this problem yesterday, you need to first plug your your factory cable into the pc using a working Kindle. That way the necessary driver, not the amazon adb driver, can be installed. Then plug it into your broken Kindle, it should now boot into fastboot.
sosimpleeKyrei said:
I literally just solved this problem yesterday, you need to first plug your your factory cable into the pc using a working Kindle. That way the necessary driver, not the amazon adb driver, can be installed. Then plug it into your broken Kindle, it should now boot into fastboot.
Click to expand...
Click to collapse
Not all of us has two kindles lol just sayin
Sent from my Provisioned Galaxy S Blaze
mharlan95 said:
I bricked the kindle fire hd 7in while trying to flash the newest android to it (used wrong bootloader). Anyway, when I start the kindle, it shows the first white/orange kindle fire logo, then it crashes to a black screen. When I plug in the factory cable, it shows the kindle fire logo and then goes to a logo that actually says "fastboot" with "kindle fire" under that, but then nothing happens. The device is not recognized by adb, but it has before, because i rooted it earlier. I can't get any unbricking utilities to work because the computer won't recognize it. How do I get my kindle to be recognized so that I can at least restore it?
Click to expand...
Click to collapse
I have the same problem. Were you able to fix it? I am thinking on doing the USB short trick I am not sure what pin to short out. Let me know if you found a solution.
Thanks
chenche said:
I have the same problem. Were you able to fix it? I am thinking on doing the USB short trick I am not sure what pin to short out. Let me know if you found a solution.
Thanks
Click to expand...
Click to collapse
I have a similar problem. I opened the kindle and made a connection from the usb-boot pin to ground.
No it shows up as
Bus 001 Device 006: ID 0451:d010 Texas Instruments, Inc.
for a few seconds when I plug in the factory cable.
But how to go on from that point?
sirdir said:
I have a similar problem. I opened the kindle and made a connection from the usb-boot pin to ground.
No it shows up as
Bus 001 Device 006: ID 0451:d010 Texas Instruments, Inc.
for a few seconds when I plug in the factory cable.
But how to go on from that point?
Click to expand...
Click to collapse
If you are dealing with a kf2 or higher then don't bother doing this as it won't work. We would need a aboot signed by amazon and we dont have it, without that we can't repair ours kindles this way, this only works on kf1. Though there is a method that you can recover a hard bricked kindle from involving soldering a usb sdcard reader to the emmc of a kindle. Btw plz start a thread next time, this was a big bump.
Hello everyone. Here's my story.
I got my Kindle, worked with it for a while, then successfully rooted it (my PC running on Windows XP stopped seeing it, but meh, that wasn't a problem at all). Then I wanted to try something new so I installed TWRP and used Cyanogen Mod and Paranoid Android (didn't really like the second one) so I decided to switch to Kinology.
I went to recovery mode, and then swiped whole system. >_< Like everything. And then I panicked and started making mistakes.
I didn't use adb sideload (silly me) but instructions from here http://forum.xda-developers.com/showthread.php?t=1951254. And one more mistake - I didn't downgrade.
So I got my Kindle in a pretty odd state - when switched on it showed me orange "Kindle Fire" logo which was blinking forever.
And my PC wouldn't recognise it anymore. It wouldn't see any Kindle device but something unknown. And it wouldn't see drivers I tried to re-install over and over again.
So I made another mistake - sent my Kindle back to the shop where I ordered it (not Amazon, an online shop here). They weren't able to do anything so I'm getting my bricked device back (soon, I hope).
So, here's what was the state of my device before I sent it back:
1) blinking orange "Kindle Fire" logo when switched on;
2) when plugged in PC with fastboot cable showing "Fastboot" logo on screen;
3) PC wouldn't recognise this device anyhow.
I'm a slowpoke, I know, I should have asked long ago, but late is still better than never.
I don't have my Kindle yet so I can't work on it for a while. But I will appreciate your advices.
Most terrifying question now is can it possibly be working again (techs from that shop said they could do nothing and it's so terribly bricked...)? Any OS would do just fine, really.
Thank you in advance.
ValeriaD said:
Hello everyone. Here's my story.
I got my Kindle, worked with it for a while, then successfully rooted it (my PC running on Windows XP stopped seeing it, but meh, that wasn't a problem at all). Then I wanted to try something new so I installed TWRP and used Cyanogen Mod and Paranoid Android (didn't really like the second one) so I decided to switch to Kinology.
I went to recovery mode, and then swiped whole system. >_< Like everything. And then I panicked and started making mistakes.
I didn't use adb sideload (silly me) but instructions from here http://forum.xda-developers.com/showthread.php?t=1951254. And one more mistake - I didn't downgrade.
So I got my Kindle in a pretty odd state - when switched on it showed me orange "Kindle Fire" logo which was blinking forever.
And my PC wouldn't recognise it anymore. It wouldn't see any Kindle device but something unknown. And it wouldn't see drivers I tried to re-install over and over again.
So I made another mistake - sent my Kindle back to the shop where I ordered it (not Amazon, an online shop here). They weren't able to do anything so I'm getting my bricked device back (soon, I hope).
So, here's what was the state of my device before I sent it back:
1) blinking orange "Kindle Fire" logo when switched on;
2) when plugged in PC with fastboot cable showing "Fastboot" logo on screen;
3) PC wouldn't recognise this device anyhow.
I'm a slowpoke, I know, I should have asked long ago, but late is still better than never.
I don't have my Kindle yet so I can't work on it for a while. But I will appreciate your advices.
Most terrifying question now is can it possibly be working again (techs from that shop said they could do nothing and it's so terribly bricked...)? Any OS would do just fine, really.
Thank you in advance.
Click to expand...
Click to collapse
You will be able to fix it once you have a fastboot cable, so tell me when you have gotten your kindle back.
sent fro my rooted kindle fire hd 7 with twerp and kinology rom installed
itouchables said:
You will be able to fix it once you have a fastboot cable, so tell me when you have gotten your kindle back.
sent fro my rooted kindle fire hd 7 with twerp and kinology rom installed
Click to expand...
Click to collapse
Yay, there's still hope :cyclops:
Okay, as soon as I get my Fire back I'll contact you. Thanks.
..
---------- Post added at 02:49 PM ---------- Previous post was at 02:41 PM ----------
itouchables said:
You will be able to fix it once you have a fastboot cable, so tell me when you have gotten your kindle back.
sent fro my rooted kindle fire hd 7 with twerp and kinology rom installed
Click to expand...
Click to collapse
is a "fastboot" cable the same as the cable that came with my kfhd 7"?
if not what is the difference? and where can i get one?
JeremySwagS said:
..
---------- Post added at 02:49 PM ---------- Previous post was at 02:41 PM ----------
is a "fastboot" cable the same as the cable that came with my kfhd 7"?
if not what is the difference? and where can i get one?
Click to expand...
Click to collapse
Yes a fastboot cable is different, you can buy one from scorpion, or you can make your own.......
sent fro my rooted kindle fire hd 7 with twerp and kinology rom installed
In the same position.
I had successfully rooted my Kindle Fire HD 7" via this http://forum.xda-developers.com/showthread.php?t=2351201
I was then going to install a mod via this method: http://forum.xda-developers.com/showthread.php?t=2271909
Was in one of the twrp screens when I was called away from the house. My wife let my neighbor and her pestilential 6 year old son into the house. Apparently, this little budding genius found my kindle and just randomly hit everything. How I didn't wind up in custody is beyond me.
When I got back to the house, I picked up a Kindle that would just cycle into twrp (orange logo/blue logo a few times and then twrp - nothing else). Windows no longer recognized the device. I got a Fastboot cable and used the KFHD Recovery Tool.
http://forum.xda-developers.com/showthread.php?t=1951254 which reported itself
I first started with option 4 - Erase cache and user data. I got "OKAY" messages on both steps. Followed by "GONE - Hope you made a backup!"
Then I went on to option 2 - Restore Factory Rooted with Super SU.apk, Apex Launcher and Play Store
Got message "Sending System 907264 kb"
OKAY *some number of seconds that the procedure took and WELCOME BACK!
I swapped the cable from the Factory cable to the normal Kindle Fire usb cable and selected option 6 Reboot normally.
Now I'm stuck in a normal straight orange Kindle Fire boot loop. Any ideas how to fix this? I've been up and down the forums and being a newb and, relatively speaking, an idiot - I've failed to find my way forward.
Try using kindle fire first aid this time around, I have a feeling it will work. Still need to use fastboot cable to get into fastboot but other than that it also has a restore stock system images feature.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
stunts513 said:
Try using kindle fire first aid this time around, I have a feeling it will work. Still need to use fastboot cable to get into fastboot but other than that it also has a restore stock system images feature.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
Thanks for the help Stunts! I try using KFFirstAide and it gets to *Daemon started successfully* and then nothing. Any operation where KFFirstAide accesses the Kindle - it just goes to a blinking cursor. Nothing ever pops up on the Kindle itself - it just stays on the Fastboot screen.
I've tried both the repair function for the KF HD 7" and going in through diagnostics to attempt to repair.
If I use the factory cable, it goes straight to Fastboot. If I use a normal cable, I cannot enable any ADB functions as the device just continues to loop the orange Kindle Fire boot screen. I am unable when connected via the factory cable to regularly
The system can not find the file specified. The kindle is not responding to simple fastboot commands.
Product: Tate-PVT-08
Below that it says if you see output above this note then fastboot is enabled and you can safely proceed with a restore.
So, I reinstalled these drivers http://forum.xda-developers.com/showthread.php?t=2072359&nocache=1 - as it looks like drivers are the problem. Both before and after installation, on my device manager instead of Kindle Fire, it reads Samsung Phone and below that Android ADB Interface with a yellow triangle and comment "Device can not start" (Code 10).
So, if this Kindle were a murder scene, I'm guessing there'd be a big pool of blood somewhere around this driver issue (assuming I'm not about to be clunked on the head by some other issue and my dead body heaved into a closet to spill out onto my wife later).
I see Kindle Fire Utility has a fix for this, but some of the KFU posts have said it's for 1st gen only, so I'm a little far down the rabbit hole. Will keep reading and see if I can make some sense of this.
Sorry to be so dense, I feel like a Friday the 13th victim who refuses to die and just runs around the forest screaming with a rake jammed through my shoulder. I do realize it's poor form
Update: resolved the driver error via this post: http://forum.xda-developers.com/showthread.php?t=2306561&page=2
Now back into the KFFirstAide and let's see what happens. Results of KF First Aide are the same (although the driver on the device manager is back to reading Kindle Fire and ADB interface which is working properly)
GODS BE PRAISED!!!! Got back in via the KF HD SRT. Rolling along now. Thanks again Stunts. Really appreciate your time.
(Hilarious end note - along came an OTA update and wiped all my good work. Back to square one *Shakes fist at God*)
itouchables said:
You will be able to fix it once you have a fastboot cable, so tell me when you have gotten your kindle back.
sent fro my rooted kindle fire hd 7 with twerp and kinology rom installed
Click to expand...
Click to collapse
Hello.
It's been a while but I got my Kindle and ready to work with it.
I'll try first aid after I charge it.
Just want to clarify few steps.
I have a "clear" recently re-installed Windows 7. What I did was installing drivers from here http://forum.xda-developers.com/showthread.php?t=2072359&nocache=1 then steps 1-9 from here http://forum.xda-developers.com/showthread.php?t=2096888.
Do I heed QemuRoot? Or it was wrong to do these steps before ever trying to find any adb devices?
My kindle doesn't show in the list of devices, it still blinks with orange "Kindle Fire" when connected to PC via data cable and shows "Fastboot" logo when connected via fastboot cable.
What should I do now?
How do I delete my post?
I mean this one, #10.
Wait so is your device showing up in the device manager with an error?
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
stunts513 said:
Wait so is your device showing up in the device manager with an error?
Click to expand...
Click to collapse
No, my device isn't showing up in the device manager at all.
And it is in fastboot? It should show up as a Tate device. Though if it is showing up but without errors but fastboot doesn't detect it I would reinstall the drivers, because I have a similar problem on windows 7. Once its in fastboot use the normal USB cable.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
stunts513 said:
And it is in fastboot? It should show up as a Tate device. Though if it is showing up but without errors but fastboot doesn't detect it I would reinstall the drivers, because I have a similar problem on windows 7. Once its in fastboot use the normal USB cable.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
Yup, first fastboot then normal cable.
My PC doesn't seem to see kindle at all. No new devices appear when plugged neither with fastboot nor data cable. Nada.
Um OK try expanding the USB devices section in the device manager and posting a screenshot, because I'm at a loss, unless you for some reason are plugged into a USB 3.0 port, but even then I thought it would at least show up. If you don't know how to take a screenshot offhand, just hit the print screen button on your keyboard, above or near the del, pg up and such keys, then open paint and hit paste, and save it.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
stunts513 said:
Um OK try expanding the USB devices section in the device manager and posting a screenshot, because I'm at a loss, unless you for some reason are plugged into a USB 3.0 port, but even then I thought it would at least show up. If you don't know how to take a screenshot offhand, just hit the print screen button on your keyboard, above or near the del, pg up and such keys, then open paint and hit paste, and save it.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
That's how it looks like.
I'm not sure I have any USB 3.0 ports. I tried to plug into 5 different ports - result was the same.
OK do me a favor, that one that says USB composite device, open its properties and goto details, and choose hardware id's from the drop down list and either screenshot it or just write em down for me.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
stunts513 said:
OK do me a favor, that one that says USB composite device, open its properties and goto details, and choose hardware id's from the drop down list and either screenshot it or just write em down for me.
Click to expand...
Click to collapse
There are two IDs.
USB\VID_0E8F&PID_0022&REV_0210
USB\VID_0E8F&PID_0022
Ah I was completely off, see I recently noticed the kindle installed as a composite device when I was in windows the other day, long story short I thought u might just need to reinstall then drivers, but that is not a kindle vendor Id that I can tell, sounds more likely to be USB speakers or something upon searching Google and getting random drivers that. Try plugging this into another computer, if it still doesn't show up it could be a hardware problem, might be as simple as resoldering some joints idk.
Edit: on another note, before trying to check for a bad connection on the kindles USB plug, try booting linux and seeing if it picks it up, usually an Ubuntu live CD will do the trick, hopefully its not a hardware problem.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
stunts513 said:
Ah I was completely off, see I recently noticed the kindle installed as a composite device when I was in windows the other day, long story short I thought u might just need to reinstall then drivers, but that is not a kindle vendor Id that I can tell, sounds more likely to be USB speakers or something upon searching Google and getting random drivers that. Try plugging this into another computer, if it still doesn't show up it could be a hardware problem, might be as simple as resoldering some joints idk.
Edit: on another note, before trying to check for a bad connection on the kindles USB plug, try booting linux and seeing if it picks it up, usually an Ubuntu live CD will do the trick, hopefully its not a hardware problem.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
My netbook runs on Ubuntu 12.04 and doesn't see Kindle as well.
I have a Friends Kindle Fire that their child somehow "red screened" I bought the fastboot cable from amazon and came here for advice on how to un-brick it. found this Thread...
http://forum.xda-developers.com/showthread.php?t=2304584
and followed the instructions fully. Cmd window said finished, I unplugged it from the kindle, pressed the power button to power down and reboot pressed the power button again and NOTHING! plugged the fastboot cord in and nothing, plugged charger into wall and nothing, tried running that otter2-u-boot-prod-10.2.4.bin again and cmd box says waiting on device. device is unresponsive in every single way. I have all of the drivers installed correctly because everything went good the first time. but now, Nothing, nada, zip, zilch! what can I do if my pc cant even communicate with it? was I instructed to install something wrong for my tablet? what happened?
If it was a kindle fire HD (tate) and you flashed a kindle fire 2 (otter2) bootloader then yes you hard bricked it, the bootloader aren't cross compatible on kindle devices. You will have to do some soldering to fix it.
I recently installed the wrong boot loader on my Kindle Fire HD 7" (2012). I got the red screen, after doing a lot of research on the forums I obtained a fast boot cable and installed KFFA to attempt to recover it. When I plug the device in using the fastboot cable it comes to the fast boot screen but on my pc it says device not recognized and in the device manager it shows error 43. I rebooted my computer and everything, reinstalled the kindle drivers but nothing seems to work. I even tried another computer thinking it could be my usb port but I got the same error. I tried to test to see if the device was in fast boot mode from another utility and it just sits at "waiting for device". I've tried to connect the fast boot cable and the connect the regular usb cable in after the device was in fast boot mode. I'm not sure what the issue is, the kindle fire seems to respond to being plugged into the computer but the computer does not recognize it. Please help.
Sne3zy said:
I recently installed the wrong boot loader on my Kindle Fire HD 7" (2012). I got the red screen, after doing a lot of research on the forums I obtained a fast boot cable and installed KFFA to attempt to recover it. When I plug the device in using the fastboot cable it comes to the fast boot screen but on my pc it says device not recognized and in the device manager it shows error 43. I rebooted my computer and everything, reinstalled the kindle drivers but nothing seems to work. I even tried another computer thinking it could be my usb port but I got the same error. I tried to test to see if the device was in fast boot mode from another utility and it just sits at "waiting for device". I've tried to connect the fast boot cable and the connect the regular usb cable in after the device was in fast boot mode. I'm not sure what the issue is, the kindle fire seems to respond to being plugged into the computer but the computer does not recognize it. Please help.
Click to expand...
Click to collapse
You can try SRT use option 3 http://forum.xda-developers.com/showthread.php?t=1951254 use only the fastboot cord. Here's some more on error code 43 http://technet.microsoft.com/en-us/library/cc725873(v=ws.10).aspx Windows
Sent from my Nexus 7 Flo running Paranoid Android 4.4.4 using XDA premium 4 mobile app
I was using FireFlash to reboot my kindle into TWRP. I didn't check the box for the bootloader. It rebooted into TWRP just fine, but when I rebooted again, it now just shows the white/orange Kindle Fire logo for a few seconds, turns off, then turns back on and shows the Kindle Fire logo again. I have a factory cable to get my kindle into fastboot mode. When I plugg it in using the factory cable, it says "Fastboot kindle fire." Now the only problem I have is that when I try using ADB commands while my kindle is plugged in to my computer, it says that there are no devices. In the device manager, my kindle showed up as Tate-PVT-08. I downloaded some drivers to see if that would fix the problem. The package I installed gave me three options; Android ADB Interface, Android Bootloader Interface, and Android Composite ADB Interface. I tried all three drivers with no success. I borrowed a friends kindle to see if plugging it in would download the right drivers. The driver their kindle used was MTP USB Device. I tried using that driver for my kindle, but encountered an error when it was installing. It wouldn't tell me the problem. Is there something I can do to fix it?