I cant connect my huawei ascent p7 to my pc. i installe hisuite and i connect the usb cable to my pc but nothing happens. I didnt get any choises on how to connect it. Also i didnt see at all any drive from the mobile to the pc. i have enable the usb debbuging but it only charge the mobile. any help?
1. Did you choice HiSuite mode in notification panel after connection?
2. Did you install HiSuite on device?
3. Try installing MoboRobo on PC.
Sent from my HUAWEI P7-L10
after a few restarts on pc and on my mobile i finally did it. dont know whats wrong but now its fixed
marsian720 said:
after a few restarts on pc and on my mobile i finally did it. dont know whats wrong but now its fixed
Click to expand...
Click to collapse
Up till now I still cannot connect my p7 to my pc. I also cannot find the usb debugging in my phone.
Related
Hello.
I have an xperia x8 with Android 2.1, the original factory.
What happens is that some time ago I bought a USB cable and plugged it into the PC almost always selected the option to "load", but now I want to connect me to root does not show anything. Absolutely NOTHING!. On the computer goes "unknown device".
I've tried, downloading drivers, uninstalling and installing drivers again, changing the USB cable, connecting to a laptop, restarting my phone to the factory data. Which makes me think the problem is with the phone, I tried to Flash but can not for that that the computer has to recognize the phone and as I said, does not recognize my phone.
I wonder if you can fix my phone or can root without connecting via USB.
I have to mention that I have a memory reader on my computer, so all my files, music, etc. .. always happened to my PC using the memory reader.
I hope to have a solution for weeks trying to come thousands of methods and not one for me. ):
Thanks in advance.!
Did you tried with pc companion,from se's site?
Sent from my E15i using Tapatalk
Yes, I downloaded the Sony Ericsson site but it is the same. In principal yes fell syncs with my phone but then when the computer does not detect the companion PC not detecting it.
LBalder said:
Yes, I downloaded the Sony Ericsson site but it is the same. In principal yes fell syncs with my phone but then when the computer does not detect the companion PC not detecting it.
Click to expand...
Click to collapse
do u use SE usb cable? wen does it actually show unknown device,i mean can u access ur sdcard content on ur phone thru usb cable?
Did you checked the usb debugger?
Sent from my E15i using Tapatalk
My music, photos I have on the phone the way to the computer via a card reader , where the memory card income and transfer photos and music, phone to PC and PC to phone.
---------------------------------------
If the USB debugger is selected.
--------------------------------------
They know if there is a way you can root without connecting to a PC?
Thanks in advance
You can't without a pc,try at you friend,try at his pc
Sent from my E15i using Tapatalk
As I said, and tried it on my brother's laptop.
What might be, if your version is correct, the cell would not connect to W7 64bit OS. I'll try on a WXP, but as I said, I wonder if you can root without USB cable.
Thanks in advance!
As i said,you can't without usb cable.
Sent from my E15i using Tapatalk
LBalder said:
My music, photos I have on the phone the way to the computer via a card reader , where the memory card income and transfer photos and music, phone to PC and PC to phone.
---------------------------------------
If the USB debugger is selected.
--------------------------------------
They know if there is a way you can root without connecting to a PC?
Thanks in advance
Click to expand...
Click to collapse
before rooting usb debugging and unknown sources should be ticked
try on some of ur fren pc,
rooting can be done on pc
repair your x8 with Pc campanion
And you think I can fix it with the PC Companion if not even recognize it. .___.
men try to boot in SAFE MODE
restart your pc
then press F5 rapidly at the beginning
you see SAFE MODE
windows xp
=============
if you use windows 7
restart your pc
then press F5 rapidly at the beginning
then F8 to enter advance boot options
you see SAFE MODE
AND FINALLY
try to connect your phone
if you see removable drive on my computer your cable is OK
try to copy and paste file pc to xperia x8
if didnt WORK your usb cable is a prob
sorry my english is nose bleed
some usb cable,have low quality...it will overvolt ur x8.
it happer to me before.
especially the cheap one..
LBalder said:
As I said, and tried it on my brother's laptop.
What might be, if your version is correct, the cell would not connect to W7 64bit OS. I'll try on a WXP, but as I said, I wonder if you can root without USB cable.
Thanks in advance!
Click to expand...
Click to collapse
try using UniversalAndroot v1.6.1 OR z4root.1.1.0 or newer version of those..
it's an apk so you just download and install it on your phone and open the app..
I don't have the download link sorry..
Hey!
Today I recieved my sgsa and tried to connect it to the computer via usb. I slide the status bar and click USB CONNETCED (MTP Connected) but... nothing happens in my gio the robot (android) appeared and I could connect my phone. I installed kies and downloaded drivers but it doesn't help. Anyone knows the solution? Please, help.
Did you turn on 'USB debugging'
before connecting your phone to PC ??
Vía xÐÆ Øffíçíal™
You can also goto options, network, more options, usb connect to pc, and plug the cable
Sent from my GT-I9070 using xda app-developers app
Hello people
I'm new here, in terms of asking questions and seeking help
I have the LG Optimus P970
A few days ago I made the update to ICS, and by proceeding with this page, hackmyandroid.com/optimus-black-p970-official-ics-update/3299
After that, not impossible to connect the phone to a PC, even the software update mode, it can not recognize, anyway to connect it just throws a slow charging.
Is there someone who knows what it is.
I'd love to go back to the old software, but there is no way to detect it pc
Sorry for my bad english
Thanks in advance
I forgot to say, before the update, and my computer still recognize the phone, connecting it over sony usb cable, now it is no longer recognized by the Sony USB cable, and I do not have original LG USB cable.
Perhaps this is the reason why a computer will not recognize the phone
edzunic said:
I forgot to say, before the update, and my computer still recognize the phone, connecting it over sony usb cable, now it is no longer recognized by the Sony USB cable, and I do not have original LG USB cable.
Perhaps this is the reason why a computer will not recognize the phone
Click to expand...
Click to collapse
Your problem can be the non original cable or........reinstall the drivers and try again
Enviado desde mi LG-P970 usando Tapatalk 2
ferhpsquad said:
Your problem can be the non original cable or........reinstall the drivers and try again
Enviado desde mi LG-P970 usando Tapatalk 2
Click to expand...
Click to collapse
I have the original cable, but still the same problem.
I have all drivers installed, I can transfer files between the phone and the pc, I can use the LG suite,
But I can't see my phone on the ADB console, I can't use smartflashtool cause the phone isn't recoginized.
yesterday I tried with lg cable, and wall charger, in both cases, said slow charging the battery, I tried on three different computers, I tried to reinstall the drivers, like the software blocked communication with the phone, just charge the battery.
If there was a way to put the software through SD card, it might solve the problem.
even the software update mode, the computer does not see the phone
Bro! For the softwaretool like smartflash, You need to boot into download mode i.e., You need to switch off the phone, plug in the USB cable connected to the PC and instantly press the volume up button. Then the tool will recognise Your phone. Try it and check once!
I tried it, nothing happens,
I go to download mode, but computer does not recognize it again
behaves as if the port is destroyed
edzunic said:
I tried it, nothing happens,
I go to download mode, but computer does not recognize it again
behaves as if the port is destroyed
Click to expand...
Click to collapse
Try to boot your PC with disabled driver signatures, or use a 32bit windows system.
try entering download-mode the following way:
disconnect your phone from pc
remove battery
press and hold Vol-up
connect the usb-cable (still without battery)
Now the phone should be detected as a serial-cable device an you can use the smart flash tool.
would have to be sound,
no sound when I connect the phone to the PC
Solved my problem.
Seems like windows automatically installs driver to the phone, but it partially works.
Unistall all drivers for the phone, or try on a new computer.
Plug the phone and cancel the driver search by windows
Install drivers for LG (unplug the phone before)
Turn it off
Plug the cable and enter download mode
And there is the phone recognized on smartflashtool.
I'm flashing a new one right now, thank you.
You do not understand the problem
there's no sign, no sound when I connect the phone to a computer, any computer, drivers were or were not.
As if something in the phone blocked communication between the PC and phone
edzunic said:
You do not understand the problem
there's no sign, no sound when I connect the phone to a computer, any computer, drivers were or were not.
As if something in the phone blocked communication between the PC and phone
Click to expand...
Click to collapse
I got same problem.
bollix said:
I got same problem.
Click to expand...
Click to collapse
add me!
Connection Problem with Mackay 2.999
Hey Guys,
first of all, sorry for my not so good English
I'am at Mackay 2.999 with last Kernel of his build and can't connect the Phone to the Computer.
It only install the LGE Mobile Composite USB Device, the LGE Mobile USB Serial Port and the LGE Mobile USB Modem on connecting to the Workstation.
I had test it on many Computers but the Problem is all the same: I can't get on my Memory or ADB.
I also had testet all modes under the setting point (MTP/PTP/mass storage device) and with debbuging on and off.
On my Workstation is the Last Version of ADB (1.0.31) installed.
Did anyone know the problem?
Did no one know a result to this problem
Hmmm my PC also can't read my storage what I did is go to cwm and plugged in usb cable and pressed mount storage it seems to solve my problem. I also did a cache and dalvik cache wipe.
Hey, I have found the result to this problem. You must flash another Baseband. Use from Nooby the V30 Baseband and it is solved.
Gruß Ernst
via Tapatalk 2
but how to flash, when can´t connect to pc
lg optimus
hi frendz ,
please help me out
i'm using lg optimus p970..last night my phone memory get full and mobile get turn off ..now it wont turn on even battery is fully charged...only LG logo shows nithing else...
Hy guys , i have the same problem . I updated to 4.4.2 Nameless ROM and i can't connect my phone to pc . The only action that it's done : charging the phone and that's all . I tried connecting to another pc but with no result . An error appeared :" LGE USB Device - No driver found " .Before 4.4.2 i had 4.1.2 from CyanogenMod and with that ROM i had no problem connecting the phone to the pc . Any help ?
using ....XT1068
Hey guys im a newbie but pls help me
I am unable to connect any usb device and also not able to connect to pc
When i connect my device to my pc it does not detects my phone (tried on different pcs as well) and also the usb otg devices are also not working
I tried downgrading to kitkat but still no help....and even contacted customer support but they didnt helped
( my mobile is getting detected in AP fastboot mode without any problem....i flashed kitkat using it..) PLs help
Do you have Motorola Device Manager Installed?
If not then Download Here: Click Here
Yes it is installed properly
Ok.
First check this : First open Settings then navigate to Storage and touch the upper-right corner for the USB computer connection options. Make sure Media device (MTP) is selected.
If this doesn't work then well you need to update the driver for your phone which your computer is using. Go to device mangaer on your pc and click on your phone name and update all drivers(left click to see options).
Still not working
It worked for half hour and then gone again
Hi,
my problem is, that my P9 can´t connect to any PC via USB. I tried 3 PCs and 3 USB cables. Nothing works, my device also not listed in the Device-Manager. No PC is recognizing a new device but the phone is charging.
I changed the USB-Mode via *#*#2846579#*#* but none of them gives me a connection. Also in TWRP or Fastboot no connection.
Do you have any Ideas? Maybe the connection to the Mainboard is dead?
Regards,
Kaese
Did you try this? https://forum.xda-developers.com/p9/development/tool-universal-fastboot-adb-tool-t3486110
Braggus said:
Did you try this? https://forum.xda-developers.com/p9/development/tool-universal-fastboot-adb-tool-t3486110
Click to expand...
Click to collapse
Not this tool but ADB commands and nothing works because the PC can't detect the phone.
I had this with a P6. The USB connection was stuffed. It would let me charge the phone but nothing else. Send it in for repair.