Database Develop

Killed my Tytn 2 ?

Hi guys, i have probably killed my beloved kaiser.
This is what i did:
- Flashed latest Hyperdragon III Rom - all worked fine here
- Sometime later i figured out that the phone was not able to connect to my PC anymore (tried different computer and cable, no change: unknown usb device)
- I then entered boot loader and tried to flash an older rom (Garmin DK 3) but it stopped at 16% and i had to enter boot loader again.
The result:
Now no pc is detecting the tytn 2 correctly (unkown usb device) on boot loader screen. I guess that the usb port on the phone is somehow damaged. Any suggestions ?

http://wiki.xda-developers.com/index.php?pagename=Kaiser_Stuck_at_bootloader
there u go

I just want to say that your phone not connecting was a simple thing.

Moved to apropos section.

tabaz said:
- Sometime later i figured out that the phone was not able to connect to my PC anymore (tried different computer and cable, no change: unknown usb device)
Click to expand...
Click to collapse
Did you try deleting your sync settings?
Delete device from sync list.
unplug/replug usb. setup device again.
Or I have also had to un & re install Active-sync.
Hope this helps

nonono .. its not that active sync is not working anymore, its that windows detects the device either as unknown device (on bootloader screen!) or does not detect it at all. I even cant select USB in mtty.exe - active sync disabled. Iam pretty much sure its an usb port issue since my tytn2 have had always problem with usb cons (did not recharge and stuff). Before that issue my pc had detected the tytn2 in bootloader screen.

tabaz said:
nonono .. its not that active sync is not working anymore, its that windows detects the device either as unknown device (on bootloader screen!) or does not detect it at all. I even cant select USB in mtty.exe - active sync disabled. Iam pretty much sure its an usb port issue since my tytn2 have had always problem with usb cons (did not recharge and stuff). Before that issue my pc had detected the tytn2 in bootloader screen.
Click to expand...
Click to collapse
Try another USB cable. I have a faulty cable at work and my phone disconnects from AS all the time. At home, no problems
Dave

i have tried several usb cable on several computer - same problem.

tabaz said:
i have tried several usb cable on several computer - same problem.
Click to expand...
Click to collapse
Oh well, it worth a shot.
Dave

[Q] Unable to connect to PC

Hello
I have Froyo 2.2 I9000JXJPB
I used to be able to connect to PC but not any more. Im using Windows 7 64
I even tried and restored my laptop for factory condition and wiped out my galaxy.
Sometime when I connect the phone with the usb cable and PC would say unrecognized peripheral device and most of the times nothing happenes
it does not help if USB debug is checked or not
I even tried different usb ports in the laptop but nothing work
its driving me crazy
need help please

ok, put the phone in download mode and then connect it, try a USB port that connects direct to the motherboard, usually at the back of the tower.
also if that fails, try to uninstall kies and then re install it, that will re install the drivers.
then post back with the result.
EDIT: just realised your on a laptop not pc

omozali said:
Hello
I have Froyo 2.2 I9000JXJPB
I used to be able to connect to PC but not any more. Im using Windows 7 64
I even tried and restored my laptop for factory condition and wiped out my galaxy.
Sometime when I connect the phone with the usb cable and PC would say unrecognized peripheral device and most of the times nothing happenes
it does not help if USB debug is checked or not
I even tried different usb ports in the laptop but nothing work
its driving me crazy
need help please
Click to expand...
Click to collapse
Download and install these on your pc/laptop , your problem will be fixed
http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-USB-Driver-for-Windows-x64.shtml

Before postig my question I tired uninstalling and reinstalling kies. also tried driver reinstall option from kies
I downloaded the driver separately tried installing several times but it did not help...
Installation always endup with a message Device driver was not successfully installed
Unknown device device unplugged
Unindentified device device unplugged
If i recall correctly my problems maybe was with the last update with kies

if you go into computer > device manager and then select on the 'unidentified driver' you can select uninstall.
then start the process again, and also try installing it for the 2nd time with a different port.

Please I need help with my NOTE :(

I have owned a galaxy note for about 4 months now. But i have not been able to root or install custom ROMS because I can not get any PC to recognize my NOTE (therefore I cant use ODIN).:crying:
When i connect my note to any PC via a USB cable I get the message "USB connected - MTP connected" on my note but my computer does not recognize the note. I have installed the latest samsung note PC drivers , the latest KIES software.....it has been so tiring.:crying:
If there is any one that can help with a way i can root and install custom ROMS on the note via putting the files on the memory card (because I can sent files to the note from my PC via Bluetooth) i will be very happy. Also, if there is something i can do to make my PC recognize my note i would really love to hear it:cyclops:.

tbagtbee said:
I have owned a galaxy note for about 4 months now. But i have not been able to root or install custom ROMS because I can not get any PC to recognize my NOTE (therefore I cant use ODIN).:crying:
When i connect my note to any PC via a USB cable I get the message "USB connected - MTP connected" on my note but my computer does not recognize the note. I have installed the latest samsung note PC drivers , the latest KIES software.....it has been so tiring.:crying:
If there is any one that can help with a way i can root and install custom ROMS on the note via putting the files on the memory card (because I can sent files to the note from my PC via Bluetooth) i will be very happy. Also, if there is something i can do to make my PC recognize my note i would really love to hear it:cyclops:.
Click to expand...
Click to collapse
Did you check the usb debugging when you connect it to your computer?
Did you try to change your usb wire?

put the phone in DOWNLOAD MODE. read dr. ketan's thread.

You have to reboot your phone in Download Mode by Pressing Vol Down+Home Key+Power Button simultaneously.
A warning message will be displayed. Just Press Vol Up Button to Continue. Now connect it to pc and open ODIN. You will see a small box in upper left corner turns into yellow. It means yours phone is recognised by ODIN. Now start Flashing
Hope it Helps.

jonpaslim said:
Did you check the usb debugging when you connect it to your computer?
Did you try to change your usb wire?
Click to expand...
Click to collapse
Yes, I changed to USB debugging and i already now have 6 usb cables :crying: and it still does not work..i have tried download mode too and it ODIN didnt show the yello mark (so that means ODIN didnt see it too)

When you connect the cable to phone Does it show anything on the notification bar ? Did you tried the same on any other PC or Laptop ? Which windows you are on ?

sahilarora2003 said:
When you connect the cable to phone Does it show anything on the notification bar ? Did you tried the same on any other PC or Laptop ? Which windows you are on ?
Click to expand...
Click to collapse
It shows "USB connected - MTP connected" on the phone but no sound or notification shows on the PC. I am running windows 7, 64-bit operating system

tbagtbee said:
It shows "USB connected - MTP connected" on the phone but no sound or notification shows on the PC. I am running windows 7, 64-bit operating system
Click to expand...
Click to collapse
Then I am sure its a problem releated to drivers.
Download them from here. Remember to Remove previous drivers installed on your PC

[Q] One is not recognized by computer

Hey guys !
For some days my One just won't be recognized by my computer anymore. I neither changed anything on my computer nor on the smartphone. It's currently running ARHD 7.2 and my computer is on windows 7 Pro x64.
I already tried reinstalling HTC Sync Manager, completely removing the drivers using the device manager and I even tried installing several standalone drivers provided in the forums here at xda. Switching USB ports and USB-Debugging didn't improve anything, too.
Windows explorer just shows the HTC Sync Manager install disc but not the MTP Device, the driver install wizard says everytime i plug the phone in that the installation of an HTC MTP Device wasn't successful.
Also in the device manager there is a yellow exclamation mark on the device entry and it says that the device doesn't work correctly because Windows couldn't load the required drivers for the device. (Error code 31) (Free translation from german )
HTC Sync Manager even shows that there is an HTC One connected but i can't sync it and it doesnt show the device capacity.
The weird thing is that also the One X of my girlfriend isnt recognized by the computer, but on her computer running windows 8 x64, both devices are working correctly.
Thanks in advance

Have you turned on usb debugging

Tried both with and without usb-debugging on, but didn't change anything

http://forum.xda-developers.com/showthread.php?t=2191279
Turn on usb debugging and change the cable that can work here is the link for drivers if it don't work

Even with the drivers from this thread, another cable and usb debugging on, it just doesnt work.
Strangely the phone is recognized at myphoneexplorer and I also can copy data from there, but I don't see my phone in windows explorer

gercreed said:
Even with the drivers from this thread, another cable and usb debugging on, it just doesnt work.
Strangely the phone is recognized at myphoneexplorer and I also can copy data from there, but I don't see my phone in windows explorer
Click to expand...
Click to collapse
I'm running out of ideas lol is your windows up to date that can help
One more thing make sure your phone is open and not locked that can help as well

gercreed said:
Even with the drivers from this thread, another cable and usb debugging on, it just doesnt work.
Strangely the phone is recognized at myphoneexplorer and I also can copy data from there, but I don't see my phone in windows explorer
Click to expand...
Click to collapse
Try disabling antivirus/firewall softwware. See if that makes a differance.

grneyez said:
Try disabling antivirus/firewall softwware. See if that makes a differance.
Click to expand...
Click to collapse
Sounds like your having a mare :crying:

gercreed said:
Even with the drivers from this thread, another cable and usb debugging on, it just doesnt work.
Strangely the phone is recognized at myphoneexplorer and I also can copy data from there, but I don't see my phone in windows explorer
Click to expand...
Click to collapse
jaythenut said:
Sounds like your having a mare :crying:
Click to expand...
Click to collapse
Not sure what you mean?

gercreed said:
Even with the drivers from this thread, another cable and usb debugging on, it just doesnt work.
Strangely the phone is recognized at myphoneexplorer and I also can copy data from there, but I don't see my phone in windows explorer
Click to expand...
Click to collapse
Sounds like you have another driver in the system that is being used and not letting the computer load the HTC driver you need to copy stuff. Not to bad to fix.
Plug the phone into the computer.
First get to device manager. Control Panel/System/Device manager (right side)
Find the device the ONE is listed as should be toward the bottom under USB might have a yellow triangle on it. Right click on this device and go to uninstall. Make sure to select to delete everything (little check box) and after it finishes restart the computer. Unplug the phone and then install the HTC drivers linked above. Plug phone in and pray. If it doesn't work after that try another reset and if still nothing let us know.

I prayed like hell and still it doesn't work
Although I uninstalled the old drivers correctly, restarted my system and installed the new htc drivers, it still tries to install another driver when plugging in my phone.
USB Debug is turned on, and my antivir is deactivated, I'm really running out of ideas what to do next....

gercreed said:
I prayed like hell and still it doesn't work
Although I uninstalled the old drivers correctly, restarted my system and installed the new htc drivers, it still tries to install another driver when plugging in my phone.
USB Debug is turned on, and my antivir is deactivated, I'm really running out of ideas what to do next....
Click to expand...
Click to collapse
try it on a different pc see if its your phone or your pc

On another computer both phones work without any problems. That is whats so strange about it, just on this computer it doesn't work. Unfortunately this is an important computer and I cant restore it...

Device does not connect to PC after ROM installed

Hi
I just installed a custom lolipop 5.02 using cyanogenmod CM 12 using ODIN to my galaxy s3 mini. and everything went will
after that i tried to connect my s3 to my PC it installs the drivers and it appears in the Device Manager but it does not appear in my computer and it wont connect to kies.
I tried to enable Debugging mode and the same, i tried to change the connection type,
i went to *settings* then *storage* the from the menu i chose *USB computer connection*, once i chose PTP or MTP it gives me this error "unfortunately, settings has stopped".
It is MTP checked by default although.
this happens even without debugging enabled.
How can i get my device connects to my PC? i need to transfer data.
Thanks

loai.zabin said:
Hi
I just installed a custom lolipop 5.02 using cyanogenmod CM 12 using ODIN to my galaxy s3 mini. and everything went will
after that i tried to connect my s3 to my PC it installs the drivers and it appears in the Device Manager but it does not appear in my computer and it wont connect to kies.
I tried to enable Debugging mode and the same, i tried to change the connection type,
i went to *settings* then *storage* the from the menu i chose *USB computer connection*, once i chose PTP or MTP it gives me this error "unfortunately, settings has stopped".
It is MTP checked by default although.
this happens even without debugging enabled.
How can i get my device connects to my PC? i need to transfer data.
Thanks
Click to expand...
Click to collapse
its a known bug for cm12. novafusion workin on it. you can use twrp's mtp to transfer files.

factorexh said:
its a known bug for cm12. novafusion workin on it. you can use twrp's mtp to transfer files.
Click to expand...
Click to collapse
So how could i transfer data until the fix comes ?
is there anyway to do that ?

Any help please ?
i need to get back to previous builds or original stock but phone does not connect to Odin even ???

loai.zabin said:
Any help please ?
i need to get back to previous builds or original stock but phone does not connect to Odin even ???
Click to expand...
Click to collapse
Only if you have TWRP 2.8.0.0 or higher :
1. Boot to TWRP recovery
2. Navigate to "Mount" and enable "enable MTP"
3. Connect your device to your PC
Now you can transfer files between your phone and PC

loai.zabin said:
Any help please ?
i need to get back to previous builds or original stock but phone does not connect to Odin even ???
Click to expand...
Click to collapse
I had a similar thing happen to me after an update and was forced to do a factory restore. That's why it's always good to save stuff to your removable storage; makes it much easier to transfer/salvage data when something goes wrong.