Newbie alert again!,
I have identified a few roms I want to test out and my phone is currently operating on the following,
Stock 4.2.2
sense 5.0
software 2.24.161.1
Super cid 11111111
Hboot 156
S-off
Latest trwp recovery.
hypothetically if I was to choose one of the latest ARHD roms (which I would like to consider) could I flash it with my current firmware?
I looked for older versions of ARHD roms to see if there were versions that could avoid me flashing new firmware but there only seems to be the latest update and a Google edition so I am guessing there may be a performance/compatability issue without a newer firmware?
The Rom and Firmware guides appear to be handled separately (which is understandable) but doesnt help a newbie like me make an educated decision,in terms of what firmware to go for...or not to update it at all?
Many guides ignore the firmware side of things or there are suggestions that you can do before or after flashing a rom??but not a joined up part of the process (again I understand the principal of why this is like it is ).
Being seperate threads or processes it is sometimes hard to align forum postings with each other to manually put the process in a list in my mind that is consitent, in date and current.
Cutting to the chase....do I just bite the bullet and upgrade to the specifically associated firmware to the android os/rom build I am going to flash?.?or dont worry about it too much initially?
If i am Supercid... do i only match the phone model number when choosing firmware as I am technically regionally/carrier unlocked?(picking the right one probably troubles me more!)
With s-off as there is no margin for error using the wrong firmware,whereas I have recovery and back ups for the rom side of things.
For me its a bit like riding a bike...i need my stablisers to get my confidence...once i have tried a few solo runs ..i will be fine.. I am sure you have all worn your L plates sorry to burden you with mine...but this forum seems like the safest place to learn !
Shepps
shepppster said:
Newbie alert again!,
I have identified a few roms I want to test out and my phone is currently operating on the following,
Stock 4.2.2
sense 5.0
software 2.24.161.1
Super cid 11111111
Hboot 156
S-off
Latest trwp recovery.
hypothetically if I was to choose one of the latest ARHD roms (which I would like to consider) could I flash it with my current firmware?
I looked for older versions of ARHD roms to see if there were versions that could avoid me flashing new firmware but there only seems to be the latest update and a Google edition so I am guessing there may be a performance/compatability issue without a newer firmware?
The Rom and Firmware guides appear to be handled separately (which is understandable) but doesnt help a newbie like me make an educated decision,in terms of what firmware to go for...or not to update it at all?
Many guides ignore the firmware side of things or there are suggestions that you can do before or after flashing a rom??but not a joined up part of the process (again I understand the principal of why this is like it is ).
Being seperate threads or processes it is sometimes hard to align forum postings with each other to manually put the process in a list in my mind that is consitent, in date and current.
Cutting to the chase....do I just bite the bullet and upgrade to the specifically associated firmware to the android os/rom build I am going to flash?.?or dont worry about it too much initially?
If i am Supercid... do i only match the phone model number when choosing firmware as I am technically regionally/carrier unlocked?(picking the right one probably troubles me more!)
With s-off as there is no margin for error using the wrong firmware,whereas I have recovery and back ups for the rom side of things.
For me its a bit like riding a bike...i need my stablisers to get my confidence...once i have tried a few solo runs ..i will be fine.. I am sure you have all worn your L plates sorry to burden you with mine...but this forum seems like the safest place to learn !
Shepps
Click to expand...
Click to collapse
You are s-off and super cid. Nothing much to worry about here. I'm assuming you are not sprint or verizon. Just get the newest firmware and flash it. If something isn't working right for you flash old firmware. You are not locked down to anything. Here is the newest firmware that will work fine unless you are sprint/verizon/ or dual sim model
https://www.androidfilehost.com/?fid=95897840722644637 - Thanks to LIabtoofer
BACKUP FIRST
adb reboot bootloader
fastboot erase cache
fastboot oem rebootRUU
fastboot flash zip firmware.zip <--it will say flash again and take longer the second time
fastboot flash zip firmware.zip
fastboot reboot-bootloader
Load newest twrp -http://techerrata.com/browse/twrp2/m7
fastboot flash recovery twrp.img
fastboot erase cache <-- may fail since we wiped cache once already, no biggie
Load twrp "which mounts automatically now" put your rom on phone
wipe, advanced, cache-dalvik,system,data - Wipe <---cache may fail
install new rom. This lollipop firmware works fine with kitkat roms too
an0ther said:
You are s-off and super cid. Nothing much to worry about here. I'm assuming you are not sprint or verizon. Just get the newest firmware and flash it. If something isn't working right for you flash old firmware. You are not locked down to anything. Here is the newest firmware that will work fine unless you are sprint/verizon/ or dual sim model
BACKUP FIRST
adb reboot bootloader
fastboot erase cache
fastboot oem rebootRUU
fastboot flash zip firmware.zip <--it will say flash again and take longer the second time
fastboot flash zip firmware.zip
fastboot reboot-bootloader
Load newest twrp -
fastboot flash recovery twrp.img
fastboot erase cache <-- may fail since we wiped cache once already, no biggie
Load twrp "which mounts automatically now" put your rom on phone
wipe, advanced, cache-dalvik,system,data - Wipe <---cache may fail
install new rom. This lollipop firmware works fine with kitkat roms too
Click to expand...
Click to collapse
Really appreciate this response and I am not sprint/verzion or dual sim so got that covered.
Just to clarify the rest....
The process of flashing the firmware will completely wipe the phone?
Flash TWRP recovery (i already have this but if the above assumption is correct ,understood!)
Install the new rom...or could I flash my back up (which I have via a OTG lead and memory stick)?
or would the new firmware be incompatible with my old JB 4.2.2 and cause problems?
The only reason I ask is that I could take a breather until I make my decision regarding a new rom.
However u pro's might think just go for it in one its no biggie lol?
Many thanks
Sheppps
shepppster said:
Really appreciate this response and I am not sprint/verzion or dual sim so got that covered.
Just to clarify the rest....
The process of flashing the firmware will completely wipe the phone?
Flash TWRP recovery (i already have this but if the above assumption is correct ,understood!)
Install the new rom...or could I flash my back up (which I have via a OTG lead and memory stick)?
or would the new firmware be incompatible with my old JB 4.2.2 and cause problems?
The only reason I ask is that I could take a breather until I make my decision regarding a new rom.
However u pro's might think just go for it in one its no biggie lol?
Many thanks
Sheppps
Click to expand...
Click to collapse
I do not recommend you just grab the latest firmware update and flash it to you phone, There is a very good chance you will brick your device with a firmware incompatibility
As your on 2.xx firmware jumping strait to 6.xx or 7.xx is a big jump and skipping firmware updates should never be recommended.
To safely update your firmware you need to flash 3.xx, 4.xx, 5.xx and so on untill your updated to the latest firmware. I was able to find the 5.xx and 6.xx firmwares for your device here http://xda7.androidrevolution.org/db_mirror/Firmware/index.php?dir=HTC/HTC_One/161/ but you will still need to find 3.xx and 4.xx. ALternativly because your s-off with super cid you could switch to a different firmware brand HTC 401 for example. all of which can be found here http://xda7.androidrevolution.org/db_mirror/Firmware/index.php?dir=HTC/HTC_One/401/
you will need to flash atleast these 4 updates to get to the latest safely
3.62.401.1
4.19.401.11
5.11.401.10
6.09.401.12
On the other hand if your not comfortable flashing firmware you could just install a Guru Reset rom then update your phone through OTA updates although that will take much longer than flashing the firmware manually. This reset rom will give you stock with working OTA's if installed with the following options http://www.htc1guru.com/dld/guru_reset_m7_2-24-161-1-zip/
Stock Recovery = Yes
Stock Radio =Yes
Root = No
Thanks for that advice,
it did cross my mind that it was a bit of a leap.
If I went back to restoring the stock reovery I know i would lose root and custom recovery and the unlocked status.
Would I have to return to S-on and lose supercid?
TBH getting to s-off was a bit of a nightmare and took a number of tries so I would hate to go through that again?
I might try a phased firmware update unless you recomend a custom rom that will work comfortably with my current firmware?
I prefer the stock look of the ARHD roms...but older versions dont see to be around anymore.
I shall dwell on the situation!
Shepps
shepppster said:
Thanks for that advice,
it did cross my mind that it was a bit of a leap.
If I went back to restoring the stock reovery I know i would lose root and custom recovery and the unlocked status.
Would I have to return to S-on and lose supercid?
TBH getting to s-off was a bit of a nightmare and took a number of tries so I would hate to go through that again?
I might try a phased firmware update unless you recomend a custom rom that will work comfortably with my current firmware?
I prefer the stock look of the ARHD roms...but older versions dont see to be around anymore.
I shall dwell on the situation!
Shepps
Click to expand...
Click to collapse
NEVER EVER GO S-on ... no matter who says it .. NEVER GO S-on
clsA said:
NEVER EVER GO S-on ... no matter who says it .. NEVER GO S-on
Click to expand...
Click to collapse
Heeding your words clsA... I dont want to go through that headache again ..it took me 3 days to get it off with rumrunner (mainly down to the PC's i was using rather than the software) but i dont intend to go back Jack!
clsA said:
NEVER EVER GO S-on ... no matter who says it .. NEVER GO S-on
Click to expand...
Click to collapse
^^^Wise Words^^^ going back to s-on always causes more problems than it solves. Never ever go back to s-on
shepppster said:
Heeding your words clsA... I dont want to go through that headache again ..it took me 3 days to get it off with rumrunner (mainly down to the PC's i was using rather than the software) but i dont intend to go back Jack!
Click to expand...
Click to collapse
You shouldn't shy away from updating your firmware it's really not that scary and perfectly safe as long as you do it correctly. You can even flash modified firmwares. So if you wanted to flash a firmware without losing your custom recovery and boot.img just open the firmware.zip and delete the recovery and boot.img then flash.
below is the basic procedure for flashing a firmware.zip with s-off.
Download the firmware.zip and put it in your fastboot folder on your pc. Boot your phone to the bootloader and connect fastboot usb. In the command window use the following commands to flash the firmware.
Code:
fastboot erase cache
fastboot oem rebootRUU
--- case sensitive ---^^^
Your phone will reboot to a black screen with silver HTC logo. This is ruu mode we can now flash the firmware.
Code:
fastboot flash zip firmware.zip
The first flash is just a pre-update and will appear to fail. The screen will go off and then return to ruu mode. Flash the zip again immediately.
Code:
fastboot flash zip firmware.zip
The second flash will flash the firmware, the progress bar on the screen will not reach 100% this is normal as long as the command line has finished it's output it's done.
Code:
fastboot reboot-bootloader
Danny201281 said:
^^^Wise Words^^^ going back to s-on always causes more problems than it solves. Never ever go back to s-on
You shouldn't shy away from updating your firmware it's really not that scary and perfectly safe as long as you do it correctly. You can even flash modified firmwares. So if you wanted to flash a firmware without losing your custom recovery and boot.img just open the firmware.zip and delete the recovery and boot.img then flash.
below is the basic procedure for flashing a firmware.zip with s-off.
Download the firmware.zip and put it in your fastboot folder on your pc. Boot your phone to the bootloader and connect fastboot usb. In the command window use the following commands to flash the firmware.
Code:
fastboot erase cache
fastboot oem rebootRUU
--- case sensitive ---^^^
Your phone will reboot to a black screen with silver HTC logo. This is ruu mode we can now flash the firmware.
Code:
fastboot flash zip firmware.zip
The first flash is just a pre-update and will appear to fail. The screen will go off and then return to ruu mode. Flash the zip again immediately.
Code:
fastboot flash zip firmware.zip
The second flash will flash the firmware, the progress bar on the screen will not reach 100% this is normal as long as the command line has finished it's output it's done.
Code:
fastboot reboot-bootloader
Click to expand...
Click to collapse
Thanks for this,I need a bit more clarity.
Delete the two files as described from the zip file,re-zip (package will have hboot,radio,adsp etc).
Flash firmware (do I refer to it by zip name eg3.62.401.1.zip or just as described firmware.zip,although i am guessing one wouldnt actually do anything)
Reboot ,go to recovery (which will be my TWRP) full wipe and flash my back up (or will this revert to my current firmware?) or flash a new rom?
If still using my JB 4.2.2 work with newer firmware? or do I need to start matching the o/s revisions for example 4.3 for the 1st upgrade...move onto the 4.****** firmware next one etc Kit kat rom ?
As I am supercid like you said ,is the alternative firmware ok with my device are these versions just different carrier versions or unsigned or whatever and would there be an isue if i moved to this branch of firmware?
All I really want to do is get my phone to a Kit Kat position...the Guru /ota route seems too convoluted and I am comfortable using fastboot commands but like to have the whole process as water tight as I can get it!
Clearly after the work I gone to to get in a total unlocked state I definitely dont want to go back!
Just to confirm flashing any firmware would not overide my S-off settings that would have to be physically done by command using the appropriate software?
Sorry if you guys are repeating something like this over and over again... best safe and not sorry imo!
Thanks Again
Shepps
shepppster said:
Thanks for this,I need a bit more clarity.
Delete the two files as described from the zip file,re-zip (package will have hboot,radio,adsp etc).
Flash firmware (do I refer to it by zip name eg3.62.401.1.zip or just as described firmware.zip,although i am guessing one wouldnt actually do anything)
Reboot ,go to recovery (which will be my TWRP) full wipe and flash my back up (or will this revert to my current firmware?) or flash a new rom?
If still using my JB 4.2.2 work with newer firmware? or do I need to start matching the o/s revisions for example 4.3 for the 1st upgrade...move onto the 4.****** firmware next one etc Kit kat rom ?
As I am supercid like you said ,is the alternative firmware ok with my device are these versions just different carrier versions or unsigned or whatever and would there be an isue if i moved to this branch of firmware?
All I really want to do is get my phone to a Kit Kat position...the Guru /ota route seems too convoluted and I am comfortable using fastboot commands but like to have the whole process as water tight as I can get it!
Clearly after the work I gone to to get in a total unlocked state I definitely dont want to go back!
Just to confirm flashing any firmware would not overide my S-off settings that would have to be physically done by command using the appropriate software?
Sorry if you guys are repeating something like this over and over again... best safe and not sorry imo!
Thanks Again
Shepps
Click to expand...
Click to collapse
When you flash the firmware.zip the command ends with the actual name of the zip so if the zip is named 3.62.401.1.zip then the correct command would be
Code:
fastboot flash zip 3.62.401.1.zip
The firmware packages are basically the same
3.xx.502.x is AT&T
3.xx401.x is HTC or
3.xx771.x is H3G
and so on, The 3 digit number in the middle is as you suggested just a carrier identifier. Flashing firmware or RUU's will not change your s-off status only you can do that with a very specific fastboot command the chances of it happening accidentally are very slim unless you do it with a toolkit.
So to get to kitkat simply flash the 3.xx 4.xx 5.xx and 6.xx firmware you do not need to flash a matching rom for each firmware version just fastboot reboot-bootloader after each firmware zip the go right to flashing the next one. Once there all done the phone should boot right up regardless of what rom you currently have installed (Provided you removed the boot.img and recovery.img from the zips before flashing) or you can go right to flashing a kitkat based custom rom of your choice if you haven't already. :good:
Danny201281 said:
When you flash the firmware.zip the command ends with the actual name of the zip so if the zip is named 3.62.401.1.zip then the correct command would be
Code:
fastboot flash zip 3.62.401.1.zip
The firmware packages are basically the same
3.xx.502.x is AT&T
3.xx401.x is HTC or
3.xx771.x is H3G
and so on, The 3 digit number in the middle is as you suggested just a carrier identifier. Flashing firmware or RUU's will not change your s-off status only you can do that with a very specific fastboot command the chances of it happening accidentally are very slim unless you do it with a toolkit.
So to get to kitkat simply flash the 3.xx 4.xx 5.xx and 6.xx firmware you do not need to flash a matching rom for each firmware version just fastboot reboot-bootloader after each firmware zip the go right to flashing the next one. Once there all done the phone should boot right up regardless of what rom you currently have installed (Provided you removed the boot.img and recovery.img from the zips before flashing) or you can go right to flashing a kitkat based custom rom of your choice if you haven't already. :good:
Click to expand...
Click to collapse
Great I get that and it makes sense now..but it always pays to check and double check.
My last question is the zips contain radio too,clearly this may or may not be an issue but i would predict they are desgined for certain carriers.The 401 branch I would assume are generic HTC international ones and shouldnt raise an issue unless I went for AT&T whiich is American...and I am in the UK perhaps.
Shepps
shepppster said:
Great I get that and it makes sense now..but it always pays to check and double check.
My last question is the zips contain radio too,clearly this may or may not be an issue but i would predict they are desgined for certain carriers.The 401 branch I would assume are generic HTC international ones and shouldnt raise an issue unless I went for AT&T whiich is American...and I am in the UK perhaps.
Shepps
Click to expand...
Click to collapse
Yeah the HTC 401 firmwares are WWE or World Wide English :good: the radio's shouldnt cause you any problems. And don't worry about asking questions Better to ask before you try. Preventing a brick is easier than fixing one :good:
Danny201281 said:
Yeah the HTC 401 firmwares are WWE or World Wide English :good: the radio's shouldnt cause you any problems. And don't worry about asking questions Better to ask before you try. Preventing a brick is easier than fixing one :good:
Click to expand...
Click to collapse
Well with that invite to ask at least one last question.... I saw the collection of ARHD drivers on this forum state the following? (cant post the link sorry)
"Firmware package from 2.17.401.1 RUU
There are new touch panel drivers inside this firmware that breaks touch in custom recoveries. You can flash it and use only hardware keys in custom recovery or you can remove tp_SYN3202.img from inside the package before flashing."
I would be jumping straight to the 3.******* and upwards but would the same apply delete the same throughout? If it only breaks the custom recovery touch panel I could use a mouse and OTG cable as I assume they are fine in O/S or best to remove the file throughout as it is no big deal.
Finally if there was a beer icon u would get it +thanks.
If you ever need gardening advice just Holla its all i can offer in return for your help and everyone else in this thread lol!:good: (why u might need I dont know ,but u never know lol)
shepppster said:
Well with that invite to ask at least one last question.... I saw the collection of ARHD drivers on this forum state the following? (cant post the link sorry)
"Firmware package from 2.17.401.1 RUU
There are new touch panel drivers inside this firmware that breaks touch in custom recoveries. You can flash it and use only hardware keys in custom recovery or you can remove tp_SYN3202.img from inside the package before flashing."
I would be jumping straight to the 3.******* and upwards but would the same apply delete the same throughout? If it only breaks the custom recovery touch panel I could use a mouse and OTG cable as I assume they are fine in O/S or best to remove the file throughout as it is no big deal.
Finally if there was a beer icon u would get it +thanks.
If you ever need gardening advice just Holla its all i can offer in return for your help and everyone else in this thread lol!:good: (why u might need I dont know ,but u never know lol)
Click to expand...
Click to collapse
You'll be fine the touch screen drivers problem only affects the lower end firmwares. Nothing in the 3.xx upwards to worry about. :good:
Danny201281 said:
You'll be fine the touch screen drivers problem only affects the lower end firmwares. Nothing in the 3.xx upwards to worry about. :good:
Click to expand...
Click to collapse
Thanks again out of curiosity the boot img ,that i would delete from the firmware zip, what does it actually do?
Does it fire up the o/s in the order it needs to launch the phone and as a stock file would expect to see the related o/s system infront of it and flashing a new rom would create a new image for the new set up?
I understand the reason for deleting the recovery file .
and one other thing whilst I intend to use one of the latest customs...if I had problems and flashed my nandroid back up from TWRP would it work using JB 4.2.2? and or would it restore the firmware to the old one too or just restore the o/s so effectiveley i could use my old rom while i looked for another newer one or tried again?
I know my old rom wouldnt optimise the new firmware ,but it would give me time inbetwen tasks if I wanted to do the next step later too.
making mistakes is much easier to resolve the better you understand the logic of the engine so to speak.
Shepps
shepppster said:
Thanks again out of curiosity the boot img ,that i would delete from the firmware zip, what does it actually do?
Does it fire up the o/s in the order it needs to launch the phone and as a stock file would expect to see the related o/s system infront of it and flashing a new rom would create a new image for the new set up?
I understand the reason for deleting the recovery file .
Click to expand...
Click to collapse
You hit the nail on the head there the boot.img is a Rom specific boot launcher if you like. Or otherwise known as the Kernel. If you have a custom Rom and flash a stock firmware the custom boot.img is replaced with the stock boot.img so your custom Rom won't boot. Simply flashing the boot.img from your custom Rom would fix it and all your data will remain in tact but it's just easier to avoid it :good:
and one other thing whilst I intend to use one of the latest customs...if I had problems and flashed my nandroid back up from TWRP would it work using JB 4.2.2? and or would it restore the firmware to the old one too or just restore the o/s so effectiveley i could use my old rom while i looked for another newer one or tried again?
I know my old rom wouldnt optimise the new firmware ,but it would give me time inbetwen tasks if I wanted to do the next step later too.
making mistakes is much easier to resolve the better you understand the logic of the engine so to speak.
Shepps
Click to expand...
Click to collapse
Yes you can downgrade your Rom but keep your newer firmware. It shouldn't cause any major problems. You may find things like reduced no mobile or WiFi signal. Capacitive buttons not working as expected and such but usually everything works ok :good:
Danny201281 said:
You hit the nail on the head there the boot.img is a Rom specific boot launcher if you like. Or otherwise known as the Kernel. If you have a custom Rom and flash a stock firmware the custom boot.img is replaced with the stock boot.img so your custom Rom won't boot. Simply flashing the boot.img from your custom Rom would fix it and all your data will remain in tact but it's just easier to avoid it :good:
Yes you can downgrade your Rom but keep your newer firmware. It shouldn't cause any major problems. You may find things like reduced no mobile or WiFi signal. Capacitive buttons not working as expected and such but usually everything works ok :good:
Click to expand...
Click to collapse
I think this is my final question ...I know this has ended up a tutorial but the thread provides good advice to noobies.
I intend to flash the ARHD 84. once i reach the latest firmware.
Will flash each firmware up to 6.09.401.12 deleting the boot img and the recovery in each package.
When I get to firmware 6.09.401.12 I see the rom uses the official firmware so at this point I only need to delete recovery? ...the boot img should be fine for the rom?
Or do I delete the boot image as before as the flash process creates a new boot img.
or I flash the boot img from the custom zip usiing fastboot?(as there is a boot img file in the HD84 zip file)
That is it and sorry for turning this ino a saga,but I think this is a good reference thread in the long run
Shepps
shepppster said:
I think this is my final question ...I know this has ended up a tutorial but the thread provides good advice to noobies.
I intend to flash the ARHD 84. once i reach the latest firmware.
Will flash each firmware up to 6.09.401.12 deleting the boot img and the recovery in each package.
When I get to firmware 6.09.401.12 I see the rom uses the official firmware so at this point I only need to delete recovery? ...the boot img should be fine for the rom?
Or do I delete the boot image as before as the flash process creates a new boot img.
or I flash the boot img from the custom zip usiing fastboot?(as there is a boot img file in the HD84 zip file)
That is it and sorry for turning this ino a saga,but I think this is a good reference thread in the long run
Shepps
Click to expand...
Click to collapse
you don't have to delete anything from the firmware's just flash them sequentially till you get to the last one
then just flash TWRP and your rom to the phone
shepppster said:
I think this is my final question ...I know this has ended up a tutorial but the thread provides good advice to noobies.
I intend to flash the ARHD 84. once i reach the latest firmware.
Will flash each firmware up to 6.09.401.12 deleting the boot img and the recovery in each package.
When I get to firmware 6.09.401.12 I see the rom uses the official firmware so at this point I only need to delete recovery? ...the boot img should be fine for the rom?
Or do I delete the boot image as before as the flash process creates a new boot img.
or I flash the boot img from the custom zip usiing fastboot?(as there is a boot img file in the HD84 zip file)
That is it and sorry for turning this ino a saga,but I think this is a good reference thread in the long run
Shepps
Click to expand...
Click to collapse
If your intention is to flash a rom directly after flashing the firmware then you don't need to worry about the boot.img, the correct boot.img will be flashed with the rom.
It's a good idea to have the rom in your internal storage before you start though so you won't need to boot to android to copy the rom after flashing the firmware or use adb push to get the rom to the phone.
Danny201281 said:
If your intention is to flash a rom directly after flashing the firmware then you don't need to worry about the boot.img, the correct boot.img will be flashed with the rom.
It's a good idea to have the rom in your internal storage before you start though so you won't need to boot to android to copy the rom after flashing the firmware or use adb push to get the rom to the phone.
Click to expand...
Click to collapse
I already have it on my internal memory and also on a USB stick via OTG lead,and in my Fastboot folder (so 3 options).
I Will have to re-install/flash img of TWRP again (if i didnt delete the recovery in the firmware zip files and,as the firmwares will give me stock recovery)- reboot into bootloader launch TWRP recovery find the rom on SD or push in adb or flash from memstick...but job done!
Any issues installing TWRP over an old one? (I intend to use the same version as I have now) I assume it will see the old TWRP folder and old bkup in the SD card too? if not I am goin for it!
Shepps
Related
Hi everyone!
This is my first post, since I never had any trouble toying around with my device. I have a rooted Incredible S, that ran MIUI perfectly. I want to return back to stock (this is imperative) and use the official ICS by HTC. I tried putting back my nandroid backup, which didn't work (perhaps an incompatible radio? I have no idea...). That's when I downloaded a stock, cracked ROM from a thread I found here. This is a Gingerbread ROM with Sence 3.0 I think. Obviously, I can't get the OTA to work. I think the issue here is that my recovery is still CWM, and that OTA only works with the stock recovery (this is what I concluded from research).
This is where I'm having trouble. A RUU doesn't seem to recognise my device, so that's not an option right now. Windows recognises my SD card when I hook up my phone through USB, so I can install ROMs just fine. Is there any way to get the stock recovery and the stock ROM without using a RUU, while keeping my device rooted? I really want all of this to be stock, so no mods, hacks or tweaks. I want my phone to be in the same state as when I bought it and rooted it, before installing custom ROMS. Is this possible?
Many, many thanks in advance!
gladii said:
Hi everyone!
This is my first post, since I never had any trouble toying around with my device. I have a rooted Incredible S, that ran MIUI perfectly. I want to return back to stock (this is imperative) and use the official ICS by HTC. I tried putting back my nandroid backup, which didn't work (perhaps an incompatible radio? I have no idea...). That's when I downloaded a stock, cracked ROM from a thread I found here. This is a Gingerbread ROM with Sence 3.0 I think. Obviously, I can't get the OTA to work. I think the issue here is that my recovery is still CWM, and that OTA only works with the stock recovery (this is what I concluded from research).
This is where I'm having trouble. A RUU doesn't seem to recognise my device, so that's not an option right now. Windows recognises my SD card when I hook up my phone through USB, so I can install ROMs just fine. Is there any way to get the stock recovery and the stock ROM without using a RUU, while keeping my device rooted? I really want all of this to be stock, so no mods, hacks or tweaks. I want my phone to be in the same state as when I bought it and rooted it, before installing custom ROMS. Is this possible?
Many, many thanks in advance!
Click to expand...
Click to collapse
Hey mate, official welcome from me Second welcome from me today lol
I would advise against going s-on and fully stock.
You cannot run a ruu or ota with a custom recovery/root.
So the easiest way to get the stock experience you want is by flashing one of tpbklake's rooted stock roms. They are basically stock roms with root and can run on a custom recovery. No tweaks or anything
http://forum.xda-developers.com/showthread.php?t=1773520
http://forum.xda-developers.com/showthread.php?t=1756500
The link above (top one) is based off a newer ruu from asia, although there is not much difference
I would also suggest to try ARHD 3.0.x for the stock optimised rom
Also which bootloader version do you have?
gladii said:
Hi everyone!
This is my first post, since I never had any trouble toying around with my device. I have a rooted Incredible S, that ran MIUI perfectly. I want to return back to stock (this is imperative) and use the official ICS by HTC. I tried putting back my nandroid backup, which didn't work (perhaps an incompatible radio? I have no idea...). That's when I downloaded a stock, cracked ROM from a thread I found here. This is a Gingerbread ROM with Sence 3.0 I think. Obviously, I can't get the OTA to work. I think the issue here is that my recovery is still CWM, and that OTA only works with the stock recovery (this is what I concluded from research).
This is where I'm having trouble. A RUU doesn't seem to recognise my device, so that's not an option right now. Windows recognises my SD card when I hook up my phone through USB, so I can install ROMs just fine. Is there any way to get the stock recovery and the stock ROM without using a RUU, while keeping my device rooted? I really want all of this to be stock, so no mods, hacks or tweaks. I want my phone to be in the same state as when I bought it and rooted it, before installing custom ROMS. Is this possible?
Many, many thanks in advance!
Click to expand...
Click to collapse
Yes there a some ROMs in the Development section that are completely stock that you can flash through recovery.
The original GB 2.3.3/Sense 2.1, the GB 2.3.5/Sense 3.0 and the latest ICS 4.0.4/Sense 3.6
markj338 said:
Hey mate, official welcome from me Second welcome from me today lol
I would advise against going s-on and fully stock.
You cannot run a ruu or ota with a custom recovery/root.
So the easiest way to get the stock experience you want is by flashing one of tpbklake's rooted stock roms. They are basically stock roms with root and can run on a custom recovery. No tweaks or anything
http://forum.xda-developers.com/showthread.php?t=1773520
http://forum.xda-developers.com/showthread.php?t=1756500
The link above (top one) is based off a newer ruu from asia, although there is not much difference
I would also suggest to try ARHD 3.0.x for the stock optimised rom
Also which bootloader version do you have?
Click to expand...
Click to collapse
I'm going to sell my device so I need it back the way it was. I want to keep it rooted though, so that the next owner can decide for himself what he wants to do with it. If he he's no techie, he can enjoy the device in stock (including OTAs, or can this be done like you mentioned?). If whe wants to toy with it, he can do that too. If it's easier to just go back to stock entirely, that's fine too.
It seems that I can no longer get into hboot now? After installing that hacked gingerbread, my device just boots into Android when pressing volume down and power??
tpbklake, I'll try to flash one of those when I can get back into recovery
Weird.. Taking out the battery fixed my recovery issue. I'll flash that ROM
Btw I seem to have hboot 6.13.1002 and radio 3805.06.03.03_M. Is this the info you need?
gladii said:
Weird.. Taking out the battery fixed my recovery issue. I'll flash that ROM
Btw I seem to have hboot 6.13.1002 and radio 3805.06.03.03_M. Is this the info you need?
Click to expand...
Click to collapse
Yes
But since you want stock it won't matter
You CANNOT have both root and ota updates
Either one or the other unfortunately
You have to make a choice a rooted stock ROM will be identical to the official ota from htc but you will be able to keep root, but can't get ota updates
but unfortunately I think sense 3.6 4.0.4 is the last update
But, I have been proven wrong before
Sent from my Nexus 7
K then in my case a full stock device would be best. How do I get started with this? First install a stock ROM, then the stock recovery and then put It back in S-OFF? Which ROM should I install (would prefer the stock 2.3.3)? And where can I find the recovery? Sorry for the basic questions but those lists of ROMs can get a bit complicated..
Still getting nowhere If I flash a stock ROM in CWM, my recovery won't go back to stock, will it? Shouldn't I try to get the stock recovery first and then use a RUU? Problem is that I can't seem to find a stock recovery anywhere. And when I extract the ROM from a RUU, it's only about 180 MB, so that can't be right, can it?
gladii said:
Still getting nowhere If I flash a stock ROM in CWM, my recovery won't go back to stock, will it? Shouldn't I try to get the stock recovery first and then use a RUU? Problem is that I can't seem to find a stock recovery anywhere. And when I extract the ROM from a RUU, it's only about 180 MB, so that can't be right, can it?
Click to expand...
Click to collapse
Which ruu? Here's a good guide http://forum.xda-developers.com/showthread.php?t=1359555 but I find it faster to flash the alparev then run the ruu, 2 steps and done.
Nonverbose said:
Which ruu? Here's a good guide http://forum.xda-developers.com/showthread.php?t=1359555 but I find it faster to flash the alparev then run the ruu, 2 steps and done.
Click to expand...
Click to collapse
Sorry for the late reply. I've been busy with exams. I've tried the RUU RUU_IncredibleC_Verizon_WWE_1.22.605.0_Radio_1.00.03.04.06_release_161493_NoDriver (but I don't actually have a Verizon, could that be the problem?).
I really have no idea what all the info in the filename means, so it's difficult to find one that fits my needs. I'll take a look at your link right now and report back!
gladii said:
Sorry for the late reply. I've been busy with exams. I've tried the RUU RUU_IncredibleC_Verizon_WWE_1.22.605.0_Radio_1.00.03.04.06_release_161493_NoDriver (but I don't actually have a Verizon, could that be the problem?).
I really have no idea what all the info in the filename means, so it's difficult to find one that fits my needs. I'll take a look at your link right now and report back!
Click to expand...
Click to collapse
DO NOT attemtp to flash that one!!!! The Verizon DINC2 is a CDMA device and the radio is not compatible.
Please read the post that nonverbose referenced for you. That tells you all you need to do.
tpbklake said:
DO NOT attemtp to flash that one!!!! The Verizon DINC2 is a CDMA device and the radio is not compatible.
Click to expand...
Click to collapse
Wow, good thing it didn't succeed! How about this one:
RUU_Vivo_Gingerbread_S_HTC_ARA_2.30.415.1_Radio_20.2808.30.085AU_3805.06.03.03_M_release_199399_signed.exe
(download link: http://www.filefactory.com/file/c0af340/n/RUU_Vivo_Gingerbread_S_HTC_ARA_2.30.415.1_Radio_20.2808.30.085AU_3805.06.03.03_M_release_199399_signed.exe)
gladii said:
Wow, good thing it didn't succeed! How about this one:
RUU_Vivo_Gingerbread_S_HTC_ARA_2.30.415.1_Radio_20.2808.30.085AU_3805.06.03.03_M_release_199399_signed.exe
(download link: http://www.filefactory.com/file/c0a...5AU_3805.06.03.03_M_release_199399_signed.exe)
Click to expand...
Click to collapse
What region of the world are you in? I would recommend the HTC WWE 2.30.405.1.
tpbklake said:
What region of the world are you in? I would recommend the HTC WWE 2.30.405.1.
Click to expand...
Click to collapse
Belgium (Brussels), western Europe. I bought the device here so it should be pretty local... I'll try that one. What does the WWE mean? (Just for the info)
gladii said:
Belgium (Brussels), western Europe. I bought the device here so it should be pretty local... I'll try that one. What does the WWE mean? (Just for the info)
Click to expand...
Click to collapse
World Wide English with support for most European languages
gladii said:
Belgium (Brussels), western Europe. I bought the device here so it should be pretty local... I'll try that one. What does the WWE mean? (Just for the info)
Click to expand...
Click to collapse
Ah, perfect! Canceled my download, but there's a 20 minute interval before starting a new one, so it'll take me at least an hour to download it.
I've encountered this issue before, but randomness seemed to solve it back then: a fastboot command just displays "<waiting for device>" and then keeps hanging there. "fastboot devices" returns an empty line, so that's consistent. Phone is in fastboot USB mode, so I'm not sure what could be the issue?
And then I have a question. In that guide, it says that I should extract HBOOT.img from the rom I installed. In my case, my rom only contains a file named "hboot_1.13.0000_CRC_8a731c6e_0401.img" (along with others of course, but I assume they are redundant in this step); will that one do?
gladii said:
I've encountered this issue before, but randomness seemed to solve it back then: a fastboot command just displays "<waiting for device>" and then keeps hanging there. "fastboot devices" returns an empty line, so that's consistent. Phone is in fastboot USB mode, so I'm not sure what could be the issue?
And then I have a question. In that guide, it says that I should extract HBOOT.img from the rom I installed. In my case, my rom only contains a file named "hboot_1.13.0000_CRC_8a731c6e_0401.img" (along with others of course, but I assume they are redundant in this step); will that one do?
Click to expand...
Click to collapse
Sounds like it may be a port issue, cable issue or driver issue on the PC.
Have you tried different ports or a different cable? Do you have HTC Sync running in the System Tray on the PC?
As for the hboot file, yes that is the one.
gladii said:
And then I have a question. In that guide, it says that I should extract HBOOT.img from the rom I installed. In my case, my rom only contains a file named "hboot_1.13.0000_CRC_8a731c6e_0401.img" (along with others of course, but I assume they are redundant in this step); will that one do?
Click to expand...
Click to collapse
I thought you wanted to go to stock ICS? Hboot 1.13 it a gingerbread hboot. If you just flash the vivo_downgrade.img then run the ruu, there will be no need to extract and flash the hboot from the ruu.
Nonverbose said:
I thought you wanted to go to stock ICS? Hboot 1.13 it a gingerbread hboot. If you just flash the vivo_downgrade.img then run the ruu, there will be no need to extract and flash the hboot from the ruu.
Click to expand...
Click to collapse
No I wanted it back the way I wanted it. Rom, recovery,... all stock. But surely I'll give ICS a testdrive via OTA
I have an older version of Viper ROM on my HTC One M8 Sprint...
I've been having dropped calls like mad and I see that there is a new version of Viper.
BUT - there is some sort of issue with the firmware and so I have to somehow flash a stock ROM and do OTA - oh goodie!!
Heck man.. I love tinkering with my phone. But I have now spent HOURS AND HOURS trying to figure this out!
I am NOT s-off and I have tried numerous ways to get s-off - not going to happen.
I was successful upgrading TWRP to 2.8. BUT, the version-main of my OS is blank so I have no idea what OS I have.
Can anyone please tell me the easiest way to remedy this? I'll donate, give you beer money, whatevs!! I am just sick of trying to figure this out.
I think I just need to find the correct stock ROM and flash it right? PLEASE HELP!
No a Rom flash won't fix your issue, well unless it's stock and the previous version then you updated the software but for all that there's this thing called a ruu which stands for Rom update utility. So what you need to do is ruu to the latest 4.4.4 and from there reunlock boot loader with HTC unlock then push a recovery image via fastboot and then flash the viper Rom Sprint kernel via fastboot then go to recovery and install the Rom. Or you can just take 25 bucks and buy s-off and make your life easier with just flashing the firmware.
Sinistertensai said:
No a Rom flash won't fix your issue, well unless it's stock and the previous version then you updated the software but for all that there's this thing called a ruu which stands for Rom update utility. So what you need to do is ruu to the latest 4.4.4 and from there reunlock boot loader with HTC unlock then push a recovery image via fastboot and then flash the viper Rom Sprint kernel via fastboot then go to recovery and install the Rom. Or you can just take 25 bucks and buy s-off and make your life easier with just flashing the firmware.
Click to expand...
Click to collapse
Thanks - already tried the $25 s-off fix and it said I need to flash a stock rom or nearer stock rom. Believe me, I would gladly give $25 to get my phone to where it needs to be.
markinsf said:
Thanks - already tried the $25 s-off fix and it said I need to flash a stock rom or nearer stock rom. Believe me, I would gladly give $25 to get my phone to where it needs to be.
Click to expand...
Click to collapse
Try doing it again but fastboot flash a stock kernel (boot.img) you can get that in the firmware zip provided in development.
Run RUU then try s-off
Huge amount of frustration with trying to deal with my phone
I soft bricked my HTC One M8 HK not too long ago, and had left it sitting in the dust for a while as I had no options of fixing it because I wiped the memory on accident (how I did, I don't know. Guess I'm dumb. That's not the point though). It's been sitting on my dresser for about 2 months being unused as I had no microSD cards in hand. All it had was an unlocked bootloader and working TWRP.
As of right now, I've tried to install 4 ROMs. All 4 did not work. I followed the instructions and unlocked my bootloader and did all other essential things. I installed ViperOneM8 before being ignorant that my WiFi wouldn't work. It was the only ROM I installed that actually booted properly. The only issue was that I had no WiFi. Had it worked, I wouldn't be making this thread. Then I got Android Revolution HD, installed it and it installed properly. I booted it into system, and it brought me to bootloader. This was the same issue I had while trying to install my first ROM, and still happens. Then I got CyanogenMod, and it didn't even install. TWRP told me it failed right off the bat. Same thing with whenever I tried to install a stock firmware recovery of the variant I have, HK Sprint.
Right now, I'm getting the 4.2.5 HK RUU in hopes that it works. I tried it previously, and it was a literal waste of time. I've been here for 5 hours trying different ROMs and to no success. I was very faithful I would get to use my phone again, although unless this RUU actually works, I don't have a lot of positive faith for my phone.
Are there any fixes for getting something like CyanogenMod to work? I actually really wanted this ROM after I remembered it, and was quite let down after it failed to work. Also, is there anything I should do with the phone before I go farther with anything?
Thanks for any help you all can give, I would greatly appreciate it. Sucks not having a phone, so I'll take any help I can get. Thanks once again!
EDIT: The RUU did not work. It failed to update. Waiting for answers I guess..
F0rZ3r0 said:
I soft bricked my HTC One M8 HK not too long ago, and had left it sitting in the dust for a while as I had no options of fixing it because I wiped the memory on accident (how I did, I don't know. Guess I'm dumb. That's not the point though). It's been sitting on my dresser for about 2 months being unused as I had no microSD cards in hand. All it had was an unlocked bootloader and working TWRP.
As of right now, I've tried to install 4 ROMs. All 4 did not work. I followed the instructions and unlocked my bootloader and did all other essential things. I installed ViperOneM8 before being ignorant that my WiFi wouldn't work. It was the only ROM I installed that actually booted properly. The only issue was that I had no WiFi. Had it worked, I wouldn't be making this thread. Then I got Android Revolution HD, installed it and it installed properly. I booted it into system, and it brought me to bootloader. This was the same issue I had while trying to install my first ROM, and still happens. Then I got CyanogenMod, and it didn't even install. TWRP told me it failed right off the bat. Same thing with whenever I tried to install a stock firmware recovery of the variant I have, HK Sprint.
Right now, I'm getting the 4.2.5 HK RUU in hopes that it works. I tried it previously, and it was a literal waste of time. I've been here for 5 hours trying different ROMs and to no success. I was very faithful I would get to use my phone again, although unless this RUU actually works, I don't have a lot of positive faith for my phone.
Are there any fixes for getting something like CyanogenMod to work? I actually really wanted this ROM after I remembered it, and was quite let down after it failed to work. Also, is there anything I should do with the phone before I go farther with anything?
Thanks for any help you all can give, I would greatly appreciate it. Sucks not having a phone, so I'll take any help I can get. Thanks once again!
EDIT: The RUU did not work. It failed to update. Waiting for answers I guess..
Click to expand...
Click to collapse
Flashing RUU requires locked bootloader.
Alright, I'm seriously about to just throw this thing in the dumpster. I've been here another 2 hours trying to get Cyanogen to work, and I figured out the issue with it. The updater script file wasn't accepting m8_whl. I'm still unaware how in the Mod Edit I'm supposed to put m8_whl into the script for it to be accepted.
To be more specific, the actual updater script has m8whl, while my phone recognizes as m8_whl. It denies it.
I thought I put it into the script correctly, although it is not accepting it. I found a quote not saying the location, and I assumed in the latest release of Cyanogen 12 for M8s, it was in /META-INF/google/android/updater-script
Please, someone help me before I have an anger episode. This thing has literally wasted my whole Mod Edit day.
F0rZ3r0 said:
Alright, I'm seriously about to just throw this thing in the dumpster. I've been here another 2 hours trying to get Cyanogen to work, and I figured out the issue with it. The updater script file wasn't accepting m8_whl. I'm still unaware how in the Mod Edit I'm supposed to put m8_whl into the script for it to be accepted.
To be more specific, the actual updater script has m8whl, while my phone recognizes as m8_whl. It denies it.
I thought I put it into the script correctly, although it is not accepting it. I found a quote not saying the location, and I assumed in the latest release of Cyanogen 12 for M8s, it was in /META-INF/google/android/updater-script
Please, someone help me before I have an anger episode. This thing has literally wasted my whole Mod Edit day.
Click to expand...
Click to collapse
Don't toss it, it's still worth something, even if not to you. But as @popthosegaskets said, you need to relock the bootloader to flash the RUU. If it's been sitting for awhile, what version of firmware and hboot was it on prior to not working? Perhaps the issue is that it's older, also try flashing the newest version of TWRP if you still want to install a custom OS.
If you want to RUU, just use the fastboot command "fastboot oem lock" while in fastboot and then run the RUU. I think it reboots after locking.
dopy25 said:
Don't toss it, it's still worth something, even if not to you. But as @popthosegaskets said, you need to relock the bootloader to flash the RUU. If it's been sitting for awhile, what version of firmware and hboot was it on prior to not working? Perhaps the issue is that it's older, also try flashing the newest version of TWRP if you still want to install a custom OS.
If you want to RUU, just use the fastboot command "fastboot oem lock" while in fastboot and then run the RUU. I think it reboots after locking.
Click to expand...
Click to collapse
Alright, doing this now. I'm a lot calmer today, so I can do this.
dopy25 said:
Don't toss it, it's still worth something, even if not to you. But as @popthosegaskets said, you need to relock the bootloader to flash the RUU. If it's been sitting for awhile, what version of firmware and hboot was it on prior to not working? Perhaps the issue is that it's older, also try flashing the newest version of TWRP if you still want to install a custom OS.
If you want to RUU, just use the fastboot command "fastboot oem lock" while in fastboot and then run the RUU. I think it reboots after locking.
Click to expand...
Click to collapse
Didn't work, the RUU gave me the same error as last time, it tells me its the wrong RUU. Got both the stock RUUs just to see if I got it wrong about HK, both failed. Please help...
F0rZ3r0 said:
Didn't work, the RUU gave me the same error as last time, it tells me its the wrong RUU. Got both the stock RUUs just to see if I got it wrong about HK, both failed. Please help...
Click to expand...
Click to collapse
[Mod hat on] I know it can be frustrating at times but please take it easy with the swearing. [/Mod hat off]
You might try flashing the Full firmware that matches the RUU that you are trying to flash, the past couple updates require hboots to match on both your device and the RUU or you will get an error.
Sloth said:
[Mod hat on] I know it can be frustrating at times but please take it easy with the swearing. [/Mod hat off]
You might try flashing the Full firmware that matches the RUU that you are trying to flash, the past couple updates require hboots to match on both your device and the RUU or you will get an error.
Click to expand...
Click to collapse
My apologies for the swearing, was angry at the time.
Also, my hboot version seems to be 3.18. Not sure what to do in order to be able to flash firmware. My OS version seems to be 2.16.651.4 as well if that helps.
What would I have to do in order to install a ROM and how?
If you are not flashing the full firmware to begin with, that's the issue. From your OP it looks like you only have an unlocked BL and had TWRP.
You must relock the BL and then run the full RUU, you can get it in the thread here, or get it from HTC. Either way you need the full one, it flashes the FW and Software as well as bootloader and radios.
HTC: http://dl3.htc.com.s3.amazonaws.com..._NV_SPCS_1.52_003_release_446220_signed_2.exe
Thread with all and modified FW
http://forum.xda-developers.com/showthread.php?t=2729173
Are you S-Off or On? If you are running the *.651* then that's the non HK version. It's ok if you flashed a modified stock, but if you got that from an RUU, that would be what the issue is. I think
dopy25 said:
If you are not flashing the full firmware to begin with, that's the issue. From your OP it looks like you only have an unlocked BL and had TWRP.
You must relock the BL and then run the full RUU, you can get it in the thread here, or get it from HTC. Either way you need the full one, it flashes the FW and Software as well as bootloader and radios.
HTC: http://dl3.htc.com.s3.amazonaws.com..._NV_SPCS_1.52_003_release_446220_signed_2.exe
Thread with all and modified FW
http://forum.xda-developers.com/showthread.php?t=2729173
Are you S-Off or On? If you are running the *.651* then that's the non HK version. It's ok if you flashed a modified stock, but if you got that from an RUU, that would be what the issue is. I think
Click to expand...
Click to collapse
I believe I'm S-OFF.
F0rZ3r0 said:
I believe I'm S-OFF.
Click to expand...
Click to collapse
look in bootloader it will tell you if you are s-off or s-on.
Sloth said:
look in bootloader it will tell you if you are s-off or s-on.
Click to expand...
Click to collapse
Never mind, S-ON.
F0rZ3r0 said:
Never mind, S-ON.
Click to expand...
Click to collapse
Ok re-lock your bootloader if you have not already.
Flash this for Non HK 4.25.651.18 Full Firmware
Flash this for HK 4.25.654.18 Full Firmware
Instructions:
-rename firmware to firmware.zip
-copy firmware.zip to your sdk folder
-boot into bootloader
-plug in usb
-select fastboot option (screen should say fastboot usb)
-type fastboot oem rebootRUU
-when u see the black screen w/ HTC, type fastboot flash zip firmware.zip
-when it's done, type fastboot reboot
Once done flash the latest Non HK or HK RUU found here... http://forum.xda-developers.com/showthread.php?t=2729173
Then unlock your bootloader again using the unlock code you got from HTC.
Re-flash the latest TWRP found here... https://dl.twrp.me/m8/
This will give you a fresh start then you can try to flash the rom you want.
Sloth said:
Ok re-lock your bootloader if you have not already.
Flash this for Non HK 4.25.651.18 Full Firmware
Flash this for HK 4.25.654.18 Full Firmware
Instructions:
-rename firmware to firmware.zip
-copy firmware.zip to your sdk folder
-boot into bootloader
-plug in usb
-select fastboot option (screen should say fastboot usb)
-type fastboot oem rebootRUU
-when u see the black screen w/ HTC, type fastboot flash zip firmware.zip
-when it's done, type fastboot reboot
Once done flash the latest Non HK or HK RUU found here... http://forum.xda-developers.com/showthread.php?t=2729173
Then unlock your bootloader again using the unlock code you got from HTC.
Re-flash the latest TWRP found here... https://dl.twrp.me/m8/
This will give you a fresh start then you can try to flash the rom you want.
Click to expand...
Click to collapse
Umm...I don't have anything called SDK :/
What do I do then?
F0rZ3r0 said:
Umm...I don't have anything called SDK :/
What do I do then?
Click to expand...
Click to collapse
If you have a platform-tools you can use that or use the folder attached.
Unzip it and copy the files to a folder.
Sloth said:
If you have a platform-tools you can use that or use the folder attached.
Unzip it and copy the files to a folder.
Click to expand...
Click to collapse
Alright, I did it all, but it doesn't seem to be changing once I send over the zip. Is it meant to take a while or is there something wrong?
EDIT: 20 minutes later and still at the sending. Something probably went wrong.
EDIT 2: 30 minutes later, still sending.
F0rZ3r0 said:
Alright, I did it all, but it doesn't seem to be changing once I send over the zip. Is it meant to take a while or is there something wrong?
EDIT: 20 minutes later and still at the sending. Something probably went wrong.
EDIT 2: 30 minutes later, still sending.
Click to expand...
Click to collapse
Should only be a few seconds.
Sloth said:
Should only be a few seconds.
Click to expand...
Click to collapse
Not sure what the issue here is then. As I write this, it is still sending. I'm not sure what the issue is...
Check PM.
So I've reset my HTC One back to stock 2 days ago and since then have received a lot of OTA updates.
Then I found that I had lost root.
I managed to reinstall TWRP and root today, but got another OTA update notification.
Because I don't want to lose root (and because TWRP says you should not update with custom recoveries), I'm looking for another way to update.
TWRP suggests to "wait for the developers to create a new ROM" but honestly, finding something in this forum is not easy...
My update is 6.09.401, but if there is something more recent I'll take that (but still KitKat). I've looked in the ROM collection but the latest seems to be 5.x or jump to 7.xx.
If I have to do some work (e.g. more research) please direct me to the right direction and I'll be happy to do it.
Will RUUs work? Still not clear what they are.
algiogia said:
So I've reset my HTC One back to stock 2 days ago and since then have received a lot of OTA updates.
Then I found that I had lost root.
Click to expand...
Click to collapse
Yep, you'll always loose root after an OTA update. Must ppl doesn't matter about that since it only takes a few minutes to root again.
I managed to reinstall TWRP and root today, but got another OTA update notification.
Because I don't want to lose root (and because TWRP says you should not update with custom recoveries), I'm looking for another way to update.
Click to expand...
Click to collapse
The only way to use ota update is by flashing back the stock recovery that match your version-main. Like said above, you'll loose root after an update. You can also update your phone by flashing a RUU but you'll also loose root and all your file since the RUU will make your phone stock, like if it was brand new.
TWRP suggests to "wait for the developers to create a new ROM" but honestly, finding something in this forum is not easy...
Click to expand...
Click to collapse
My update is 6.09.401,?but if there is something more recent I'll take that (but still KitKat). I've looked in the ROM collection but the latest seems to be 5.x or jump to 7.xx.
Click to expand...
Click to collapse
The latest Kitkat version is 6.09.401.12 otherwise its lollipop 7.19.401.x
I think the simplest solution since you want to stay on kitkat is to reflash your stock recovery 6.09.401.? (you didn't typed the last number), install the ota updates until you are on 6.09.401.11 or 6.09.401.12, reflash twrp and flash Supersu to re-root.
If I have to do some work (e.g. more research) please direct me to the right direction and I'll be happy to do it.
Will RUUs work? Still not clear what they are.[/QUOTE]
RUU are packages that will restore then entire phone Software and firmware partitions.
Thanks alray.
So are you saying there is not pre-rooted 6.09.401.11 ROM available to flash on the forum?
Where shall I look for it?
algiogia said:
Thanks alray.
So are you saying there is not pre-rooted 6.09.401.11 ROM available to flash on the forum?
Where shall I look for it?
Click to expand...
Click to collapse
Maybe i don't know. All roms are posted in the development section. Why not simply updating your phone and flashing Supersu again? It will take you maybe 20 min to install the update, reflash twrp and root...
alray said:
Maybe i don't know. All roms are posted in the development section. Why not simply updating your phone and flashing Supersu again? It will take you maybe 20 min to install the update, reflash twrp and root...
Click to expand...
Click to collapse
I'll have to find and flash the stock ROM first, do the updates, then flash TWRP and SuperSu.
If there is a way to flash only once why should I waste time (and increase chances of bricking the phone)?
algiogia said:
I'll have to find and flash the stock ROM first, do the updates, then flash TWRP and SuperSu.
If there is a way to flash only once why should I waste time (and increase chances of bricking the phone)?
Click to expand...
Click to collapse
You already are on the stock rom, just flash the stock recovery over twrp, install ota update(s) until you are on the desired version, flash twrp and supersu. There isn't really any chances to brick....
Code:
fastboot flash recovery your_stock_recovery.img
fastboot erase cache
fastboot reboot
Then boot the phone, install update(s). Once updated to the desired version, reflash twrp:
Code:
fastboot flash recovery twrp.img
fastboot erase cache
fastboot reboot-bootloader
Boot in twrp, install supersu 2.46.zip then reboot in the OS and you're done.
But yes if you prefer you can find a stock rooted rom of 6.09.401.11 if there is still one somewhere.
Well I've finally rooted my HTC One M7 after months of saying I'll do it soon, I've also flashed the latest CWM recovery on there but now my question is what do I do now? I've downloaded some apps that need root permissions but nothing great. What I want is an OS that uses minimal RAM and battery. I've seen LiquidOS but that runs Android KitKat, are there any that run on Android Lollipop?
Thanks
AJHylton said:
Well I've finally rooted my HTC One M7 after months of saying I'll do it soon, I've also flashed the latest CWM recovery on there but now my question is what do I do now? I've downloaded some apps that need root permissions but nothing great.
Click to expand...
Click to collapse
Normally you only root a phone if you need to use something that requires root privileges. Its like saying: I finally managed to open that locked door to access this room where there is nothing inside that I really need... now what?
What I want is an OS that uses minimal RAM and battery. I've seen LiquidOS but that runs Android KitKat, are there any that run on Android Lollipop?
Click to expand...
Click to collapse
If you want to flash a custom rom, you don't need to root, only need to unlock the bootlaoder and flash a custom recovery (like you already did in the process of rooting). Most custom roms are pre-rooted anyway. There a lot of lollipop roms out there, check in the development section of this forum (Sense 6/7 + Lollipop or GPE lollipop). What will be the best rom for you? Its hard to tell, test a few one yourself, its the best way to find out. If you want something stripped down then probably a GPE rom will fit your needs otherwise if you prefer to have a more "complete" experience I would say go with Sense (6 or 7) rom.
alray said:
Normally you only root a phone if you need to use something that requires root privileges. Its like saying: I finally managed to open that locked door to access this room where there is nothing inside that I really need... now what?
If you want to flash a custom rom, you don't need to root, only need to unlock the bootlaoder and flash a custom recovery (like you already did in the process of rooting). Most custom roms are pre-rooted anyway. There a lot of lollipop roms out there, check in the development section of this forum (Sense 6/7 + Lollipop or GPE lollipop). What will be the best rom for you? Its hard to tell, test a few one yourself, its the best way to find out. If you want something stripped down then probably a GPE rom will fit your needs otherwise if you prefer to have a more "complete" experience I would say go with Sense (6 or 7) rom.
Click to expand...
Click to collapse
I'd like to add - change recovery to TWRP as it's recomended for most ROMs out there
Thank you, I think I'm going to go for ViperOne by Team Venom (http://forum.xda-developers.com/showthread.php?t=2334294)
This is the first time I'll be doing this so any tips or anything you'd advise me on doing?
Thank you
AJHylton said:
Thank you, I think I'm going to go for ViperOne by Team Venom (http://forum.xda-developers.com/showthread.php?t=2334294)
This is the first time I'll be doing this so any tips or anything you'd advise me on doing?
Thank you
Click to expand...
Click to collapse
yep,
Do a Nandroid backup of your current setup before flashing anything so if something goes wrong, you can simply restore that backup and use your phone. Better to save the backup your computer so if its wiped from the phone accidentally, you still have a copy.
read the OP of the ROM you want to flash twice before proceeding
Newer Sense roms (lollipop) requires a recent firmware on your phone to work properly (a 7.xx.xxx.x version). Confirm that before flashing the rom using "fastboot getvar all". The version-main number is your firmware version.
Ask questions if you are unsure about something, better than bricking your phone
You might also want to check if there is a RUU to return your phone back to stock in case you need to in the future. (your version-main will tell you the RUU version you'll need)
alray said:
yep,
Do a Nandroid backup of your current setup before flashing anything so if something goes wrong, you can simply restore that backup and use your phone. Better to save the backup your computer so if its wiped from the phone accidentally, you still have a copy.
read the OP of the ROM you want to flash twice before proceeding
Newer Sense roms (lollipop) requires a recent firmware on your phone to work properly (a 7.xx.xxx.x version). Confirm that before flashing the rom using "fastboot getvar all". The version-main number is your firmware version.
Ask questions if you are unsure about something, better than bricking your phone
You might also want to check if there is a RUU to return your phone back to stock in case you need to in the future. (your version-main will tell you the RUU version you'll need)
Click to expand...
Click to collapse
Thank you very much I think I'm ready to do it I just need to flash TWRP recovery on as I have CWM, the only 2 questions I have are;
Do I need to do anything with the bootloader, its currently unlocked but I've read on other forums some of them require the bootloader to be locked but S-Off or something? There's nothing about this in the Viper install instructions I'm just wondering if it's relevant?
Also an RUU, is that basically a recovery file with an OS? If so would I still need to look into this if I've already done a Nandroid backup?
Thank you for all your help.
AJHylton said:
Thank you very much I think I'm ready to do it I just need to flash TWRP recovery on as I have CWM, the only 2 questions I have are;
Do I need to do anything with the bootloader, its currently unlocked but I've read on other forums some of them require the bootloader to be locked but S-Off or something? There's nothing about this in the Viper install instructions I'm just wondering if it's relevant?
Also an RUU, is that basically a recovery file with an OS? If so would I still need to look into this if I've already done a Nandroid backup?
Thank you for all your help.
Click to expand...
Click to collapse
You don't need S-OFF to flash a custom rom, only an unlocked bootloader with a custom recovery.
A RUU is a factory image. It can reflash the software and firmware back to stock if needed. Its useful to know if there is one for your phone just in case you can't restore your phone using your backup for whatever reason. Tell me what your version-main is and I'll tell you if there is a RUU somewhere.
alray said:
You don't need S-OFF to flash a custom rom, only an unlocked bootloader with a custom recovery.
A RUU is a factory image. It can reflash the software and firmware back to stock if needed. Its useful to know if there is one for your phone just in case you can't restore your phone using your backup for whatever reason. Tell me what your version-main is and I'll tell you if there is a RUU somewhere.
Click to expand...
Click to collapse
Apologies this is a really noob question but how do I find that out because I've been looking at it says about using fastboot in a command window but all I get is "Waiting for device"
edit: apologies I just realised I had to actually be in fastboot mode *duhh* my version main is - version-main: 7.19.401.30
Thank you
AJHylton said:
Apologies this is a really noob question but how do I find that out because I've been looking at it says about using fastboot in a command window but all I get is "Waiting for device"
edit: apologies I just realised I had to actually be in fastboot mode *duhh* my version main is - version-main: 7.19.401.30
Thank you
Click to expand...
Click to collapse
There is no RUU for 7.19.401.30 but there is one for 7.19.401.22 which can be used on your phone if needed in the future. :good: