My xt862 locked to sim card where flash china xt883 rom. It does not pop up sim unlock code window when insert a sim card. How to get it pop up?
I reflash verizon rom and it doesn't work. still lock sim. Says invalid sim card/no service
djtwxj said:
My xt862 locked to sim card where flash china xt883 rom. It does not pop up sim unlock code window when insert a sim card. How to get it pop up?
I reflash verizon rom and it doesn't work. still lock sim. Says invalid sim card/no service
Click to expand...
Click to collapse
My xt862 was on the xt883 ROM when I bought it off craigslist. I had to flash it back to stock to get rid of the other guy's Google account (it wouldn't delete, said it needed factory reset). After wiping, and flashing back to stock, I had to re-flash the radio.img from that Chinese ROM (and swap out my build.prop) to get it working on GSM again. Have you done these two things since flashing back to stock? I don't know what the other guy did in the process of putting my D3 on the Chinese ROM, but the GSM capabilities were lost when I wiped it (it wasn't back to stock yet, it was still a Chinese ROM, but likely locked to Chinese bands...really weird). I had to put it to stock before I could get GSM back.
So, if you haven't re-flashed the radio.img and made sure you have the tweaked build.prop in /system, then you might want to do that and see if it starts to work.
If you already did these things, try replacing your SIM and restarting several times. Mine decides to lose signal or forget which operator I'm using occasionally, so it isn't quite 100% reliable. Not entirely sure why.
Good luck
EDIT:
Also, you shouldn't need to unlock the phone ever again, as in, calling Verizon to get an unlock code. You only have to do that once, and flashing back and forth to different ROMs, even wiping the phone, doesn't get rid of the unlock. Just fyi.
Ok, soo how can i tell if my droid 3 is sim network locked or unlocked? i ask because i recently had to sbf and now when i insert a sim card it just says invalid sim, but before the sbf it would say "enter sim network unlock pin".
Can anybody tell what happened?? also i tried the sim cards in my sister's droid 3 and it says "enter sim network unlock pin".
I am very confused...
Can you help, @sd_shadow ?
Josephdbrewer25 said:
Ok, soo how can i tell if my droid 3 is sim network locked or unlocked? i ask because i recently had to sbf and now when i insert a sim card it just says invalid sim, but before the sbf it would say "enter sim network unlock pin".
Can anybody tell what happened?? also i tried the sim cards in my sister's droid 3 and it says "enter sim network unlock pin".
I am very confused...
Click to expand...
Click to collapse
Sim locked or band locked?
Sim locked requires a code, once unlocked it stays unlocked, even if you flashed firmware.
Sim unlocked only allows non USA network gms bands to work
Band unlocking allows USA gms networks to connect, the Droid 3 requires Flashing a radio.img and edited build.prop (stock), if you flashed full firmware you need to reflash radio.img
Sent from my XT907 using Tapatalk
sd_shadow said:
Sim locked or band locked?
Sim locked requires a code, once unlocked it stays unlocked, even if you flashed firmware.
Sim unlocked only allows non USA network gms bands to work
Band unlocking allows USA gms networks to connect, the Droid 3 requires Flashing a radio.img and edited build.prop (stock), if you flashed full firmware you need to reflash radio.img
Sent from my XT907 using Tapatalk
Click to expand...
Click to collapse
I mean sim lock. I never entered a code. The only thing I did was the one click SBF by overlayer. Custom roms just switch from radio off to out of service then back radio off(except for steeldroid ics as i can get get CDMA). I pop in a SIM card and boot up the stock rom it just says invalid sim. It use to ask for the unlock code before the SBF, now it doesn't. I also tried the same SIM in another droid 3 and it asked for the unlock code.
Not sure what happened or what to do about it.
Hi All -
I've searched everywhere for the answer to this and haven't been able to find it, so I figured I'd post here. This is the scenario:
1) I have a Moto X that is locked to AT&T
2) I wanted to give the phone to a friend who is on Sprint, so I paid for an unlock code
3) Even after unlocking and inserting the Sprint SIM, I still received the "SIM Network Unlock PIN" message
4) I now want to basically restore the phone completely back to the way it was (locked to AT&T), so it can be used with an AT&T SIM
5) I flashed the phone using RSDLite and the correct ATT ROM, but after the flash finished successfully and I insert a valid AT&T SIM, I still receive the same unlock message.
So my question is basically, can I get the phone completely back to being locked to AT&T, essentially the way it was out of the box? I'm also willing to flash it with Cyanogen or another ROM if that would help.
Any help is greatly appreciated, thanks for your time.
I have same issue, I had my Sim working for a couple of days but I wanted to return to stock to receive further updates and I flashed it with correct at&t firmware package but now there is a popup every time when I insert Sim about unlock code and I am stuck ... I think that's because of erasing modem st1 and modem st2 during flashing with RSDlite ... Is there anybody to suggest something helpful
Please help!!!!!!
I bought xt1060 with unlocked bootloder on kitkat 4.4.2 after some time i thought why not install twrp and custom rom.
At the starting of modding i installed twrp (latest) then cm12.1.
After some time with cm12.1, i decided to install AICP (marshmallow), there the problem started, the problem was that when i receive an incomming call there was no sound on ear piece but after turning on the loud speaker, i can clearly hear the sound.
I searched the forums and found out that if i flash lollipop modem, i can get rid of this problem i mentioned earlier, so i downloaded verizon xt1060 modem from (http://forum.xda-developers.com/moto-x/development/xt1053-retail-stock-lollipop-flashable-t3155843) and run:
Fastboot flash modem non-hlos.bin
Fastboot erase modemst1
Fastboot erase modemst2
Fastboot flash fsg fsg. Mbn
Fastboot reboot
Using adb while moto x (which is on AICP custom rom) was in fastboot mode.
Phone started boot loop on the initial starting screen.
I rebooted in recovery then wiped system, data, cache, dalvic cache then installed AICP ROM, but no luck still phone was boot looping on the initial screen, then i downloaded verizon xt1060 5.1.1 firmware from (https://firmware.center/firmware/Motorola/Moto X (1st gen-2013)/Stock/XT1060 Verizon/). Flashed it and phone booted fine after booting was completed i found out that phone was not reciving carrier signals. I searched for solutions, but no luck.
phone IMEI, baseband version was there but every thing was unknown in (about phone > status > sim status)
I checked sim from CQAtest, it said:
Sim state:absent
Sim operator:
Sim operator name:
Sim country:
Sim serial number: null
Phone ICCID:was there
Sim ICCID:null
Phone ICCID compared with sim ICCID: error
I have also checked different sims of different carrier, but still no signals.
I also flashed other modems but still no luck.
Please share if there is any way i can fix this problem :crying:
i went to the unlocking guy and asked him to give me my SPC code, he was able to extract my SPC code using "sigma key", i came home, downgrade my phone to 4.4.4, applied sim crack method (http://forum.xda-developers.com/moto...t1056-t2825155) and then i finally got my precious sim working.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
uzairali98 said:
Please help!!!!!!
I bought xt1060 with unlocked bootloder on kitkat 4.4.2 after some time i thought why not install twrp and custom rom.
At the starting of modding i installed twrp (latest) then cm12.1.
After some time with cm12.1, i decided to install AICP (marshmallow), there the problem started, the problem was that when i receive an incomming call there was no sound on ear piece but after turning on the loud speaker, i can clearly hear the sound.
I searched the forums and found out that if i flash lollipop modem, i can get rid of this problem i mentioned earlier, so i downloaded verizon xt1060 modem from (http://forum.xda-developers.com/moto-x/development/xt1053-retail-stock-lollipop-flashable-t3155843) and run:
Fastboot flash modem non-hlos.bin
Fastboot erase modemst1
Fastboot erase modemst2
Fastboot flash fsg fsg. Mbn
Fastboot reboot
Using adb while moto x (which is on AICP custom rom) was in fastboot mode.
Phone started boot loop on the initial starting screen.
I rebooted in recovery then wiped system, data, cache, dalvic cache then installed AICP ROM, but no luck still phone was boot looping on the initial screen, then i downloaded verizon xt1060 5.1.1 firmware from (https://firmware.center/firmware/Motorola/Moto X (1st gen-2013)/Stock/XT1060 Verizon/). Flashed it and phone booted fine after booting was completed i found out that phone was not reciving carrier signals. I searched for solutions, but no luck.
phone IMEI, baseband version was there but every thing was unknown in (about phone > status > sim status)
I checked sim from CQAtest, it said:
Sim state:absent
Sim operator:
Sim operator name:
Sim country:
Sim serial number: null
Phone ICCID:was there
Sim ICCID:null
Phone ICCID compared with sim ICCID: error
I have also checked different sims of different carrier, but still no signals.
I also flashed other modems but still no luck.
Please share if there is any way i can fix this problem :crying:
Click to expand...
Click to collapse
Still in problem?
Yes im still facing the problem. One day i checked my imei on international database and found out that it was xt1056 (not xt1060), i went to firmware download and downloaded
XT1056_GHOST_SPRINT_5.1_LPA23.12-39.10_cid9_CFC.xml.zip
912.0 MiB
Flashed it.
But now its taking forever on activating screen (on every boot).
I think the problem took place because i flashed verizon modem on sprint moto x
Please help ??
uzairali98 said:
Yes im still facing the problem. One day i checked my imei on international database and found out that it was xt1056 (not xt1060), i went to firmware download and downloaded
XT1056_GHOST_SPRINT_5.1_LPA23.12-39.10_cid9_CFC.xml.zip
912.0 MiB
Flashed it.
But now its taking forever on activating screen (on every boot).
Click to expand...
Click to collapse
Try reinstalling AICP since that's what you were running before, and since you flashed the correct XML everything should be working correctly.
You can find the correct model number on the back (assuming it's the original back) it's really small towards the bottom
Btw where did you check your imei?
Sent from my Moto X using Tapatalk
Josephdbrewer25 said:
Try reinstalling AICP since that's what you were running before, and since you flashed the correct XML everything should be working correctly.
You can find the correct model number on the back (assuming it's the original back) it's really small towards the bottom
Btw where did you check your imei?
Sent from my Moto X using Tapatalk
Click to expand...
Click to collapse
sir i checked my imei on multiple websites like (http://www.imei.info),(https://imeidata.net)....
They both gave me same details, btw my orignal back cover was broken so i changed it with a new one. Is there any other way of finding IMEI on hardware like under the battery or something. I'm currently running AICP because as u know phone takes forever on activating screen on stock rom.
I contacted sprint through internet, i told them every thing so they asked for my sprint phone number (for activating purpose using manual programming method) i went to settings>about phone>status>sim status, there i found this number 0000000xxxx which was not a sprint number according to sprint. I think its not activating because there is no sprint activity in pakistan.
uzairali98 said:
sir i checked my imei on multiple websites like (http://www.imei.info),(https://imeidata.net)....
They both gave me same details, btw my orignal back cover was broken so i changed it with a new one. Is there any other way of finding IMEI on hardware like under the battery or something. I'm currently running AICP because as u know phone takes forever on activating screen on stock rom.
I contacted sprint through internet, i told them every thing so they asked for my sprint phone number (for activating purpose using manual programming method) i went to settings>about phone>status>sim status, there i found this number 0000000xxxx which was not a sprint number according to sprint. I think its not activating because there is no sprint activity in pakistan.
Click to expand...
Click to collapse
Do you have a sim card?
Sent from my Moto X using Tapatalk
---------- Post added at 07:06 AM ---------- Previous post was at 07:04 AM ----------
uzairali98 said:
sir i checked my imei on multiple websites like (http://www.imei.info),(https://imeidata.net)....
They both gave me same details, btw my orignal back cover was broken so i changed it with a new one. Is there any other way of finding IMEI on hardware like under the battery or something. I'm currently running AICP because as u know phone takes forever on activating screen on stock rom.
I contacted sprint through internet, i told them every thing so they asked for my sprint phone number (for activating purpose using manual programming method) i went to settings>about phone>status>sim status, there i found this number 0000000xxxx which was not a sprint number according to sprint. I think its not activating because there is no sprint activity in pakistan.
Click to expand...
Click to collapse
You can find the imei on the sim tray if that hasn't been changed. Or thru Fastboot. Select barcodes. It's where I found mine.
Sent from my Moto X using Tapatalk
---------- Post added at 07:18 AM ---------- Previous post was at 07:06 AM ----------
You can also see the correct model number as well.
Sent from my Moto X using Tapatalk
Thanks for a quick reply.
Im checking then i'll let you know
Those websites are accurate but not precise, for mine one says xt1055 another says xt1060 but it's really xt1050.
Sent from my Moto X using Tapatalk
Its showing me 18 digit imei( which is invalid i think?) and
My serial nember
And my SKU That is xt1056.
How can i find compatible stock rom using serial number?
So how did you find real model number??
Using SKU( in barcodes) or something else
its xt1056 i have checked it. then why its not activating? :crying: :crying: :crying:
uzairali98 said:
Its showing me 18 digit imei( which is invalid i think?) and
My serial nember
And my SKU That is xt1056.
How can i find compatible stock rom using serial number?
Click to expand...
Click to collapse
The SKU is the model number. What's your bootloader?
Sent from my Moto X using Tapatalk
---------- Post added at 04:41 PM ---------- Previous post was at 04:27 PM ----------
And what did you flash from the Verizon xt1060 firmware?
Sent from my Moto X using Tapatalk
Same problem I'm facing .. I also erased modemst1/2 now no signal or not detecting Sim card .. I've flashed stock ROM also still no luck plxx help :crying:
I flashed the whole Verizon firmware not modem only
My SKU WAS XT1056
Is there any way I can downgrade from lollipop to KitKat on sprint version moto x ???
Because phone can be activated from KitKat illegally
(MY BOOTLOADER IS UNLOCKED)
I'm asking this because in my area there is shop which downgrades android version and unlock sprint phones for 500RS
Downgrading is not recommended. It can cause issues. And since you flashed the whole firmware from Verizon, you can only use the 5.1 firmware from Sprint.
Sent from my Moto X using Tapatalk
---------- Post added at 08:44 PM ---------- Previous post was at 08:42 PM ----------
A little tip: always do a nandroid backup. Maybe someone else on the forum can help. Sorry guys ?
Sent from my Moto X using Tapatalk
SOLVED
uzairali98 said:
Please help!!!!!!
I bought xt1060 with unlocked bootloder on kitkat 4.4.2 after some time i thought why not install twrp and custom rom.
At the starting of modding i installed twrp (latest) then cm12.1.
After some time with cm12.1, i decided to install AICP (marshmallow), there the problem started, the problem was that when i receive an incomming call there was no sound on ear piece but after turning on the loud speaker, i can clearly hear the sound.
I searched the forums and found out that if i flash lollipop modem, i can get rid of this problem i mentioned earlier, so i downloaded verizon xt1060 modem from (http://forum.xda-developers.com/moto-x/development/xt1053-retail-stock-lollipop-flashable-t3155843) and run:
Fastboot flash modem non-hlos.bin
Fastboot erase modemst1
Fastboot erase modemst2
Fastboot flash fsg fsg. Mbn
Fastboot reboot
Using adb while moto x (which is on AICP custom rom) was in fastboot mode.
Phone started boot loop on the initial starting screen.
I rebooted in recovery then wiped system, data, cache, dalvic cache then installed AICP ROM, but no luck still phone was boot looping on the initial screen, then i downloaded verizon xt1060 5.1.1 firmware from (https://firmware.center/firmware/Motorola/Moto X (1st gen-2013)/Stock/XT1060 Verizon/). Flashed it and phone booted fine after booting was completed i found out that phone was not reciving carrier signals. I searched for solutions, but no luck.
phone IMEI, baseband version was there but every thing was unknown in (about phone > status > sim status)
I checked sim from CQAtest, it said:
Sim state:absent
Sim operator:
Sim operator name:
Sim country:
Sim serial number: null
Phone ICCID:was there
Sim ICCID:null
Phone ICCID compared with sim ICCID: error
I have also checked different sims of different carrier, but still no signals.
I also flashed other modems but still no luck.
Please share if there is any way i can fix this problem :crying:
Click to expand...
Click to collapse
i went to the unlocking guy and asked him to give me my SPC code, he was able to extract my SPC code using "sigma key", i came home, downgrade my phone to 4.4.4, applied sim crack method (http://forum.xda-developers.com/moto-x/general/guide-success-sim-unlock-sprint-xt1056-t2825155) and then i finally got my precious sim working.
uzairali98 said:
i went to the unlocking guy and asked him to give me my SPC code, he was able to extract my SPC code using "sigma key", i came home, downgrade my phone to 4.4.4, applied sim crack method (http://forum.xda-developers.com/moto-x/general/guide-success-sim-unlock-sprint-xt1056-t2825155) and then i finally got my precious sim working.
Click to expand...
Click to collapse
Your phone will also work in 5.1 lollipop on both verizon and sprint both by just doing some things without downgrading whole firmware
Br
Shahzaib Jahangir
Hi all,
I only recently got a new Moto G5s Plus from India (XT1804).
And the first thing I did was unlock the bootloader and root it, unfortunately the second thing I did was try to use Android Pay, at which time I found out that it's not supported with an unlocked bootloader.
In reverting the stock rom (as https://forum.xda-developers.com/showpost.php?p=73795447&postcount=37) it has obviously upset the dual SIM operation, and now I'm down to just SIM 1.
Is the XT1804 stock image available? Or any other ideas for getting the second SIM working again?
Regards,
Bevan
bevanweiss said:
Hi all,
I only recently got a new Moto G5s Plus from India (XT1804).
And the first thing I did was unlock the bootloader and root it, unfortunately the second thing I did was try to use Android Pay, at which time I found out that it's not supported with an unlocked bootloader.
In reverting the stock rom (as https://forum.xda-developers.com/showpost.php?p=73795447&postcount=37) it has obviously upset the dual SIM operation, and now I'm down to just SIM 1.
Is the XT1804 stock image available? Or any other ideas for getting the second SIM working again?
Regards,
Bevan
Click to expand...
Click to collapse
The only mess up happened when u ysed the commands erase modemst1 and erase modemst2.
Had same issue with oneplus2. Had tp get my motherboard replaces as I dint had the EFS backup using recovery.
I think that you will have to-
1. re install twrp and restore your efs if you have a backup,
2. if (1) dosent work, try flashing the available NON_HLOS.bin . {Practically itwould do little help}.
3. wait untill moto releases a firmware with updated modem ( NON-HLOS.bin ) file as it usually has the data stored in modemst1 and
modemst2
4. Relock bootloader and go to the service center. dont mention that u unlocked the bootloader . if they ask, simply deny.
PS -
1. Android Pay isnt yet available in INDIA
2. I hope that when you dial *#06#, u see IMEI1=some value and IMEI2=0
Thanks,
Yeah I guess I'll have to wait for the Oreo update later in the year.
I'm in Australia, which is why Android Pay works.
On doing the *#06# I do actually get two IMEI numbers reported, and I have actually had the second SIM work just recently, so maybe things aren't all so bad.
But it almost seems like it's not using all the bands available in AU (which pretty much matches the bands used in India, although AU has LTE B42 also).
I guess this is part of the modem flash.
So I'd just need the modem stuff from an Indian phone?
I guess I'll check what bands are reported and go from there.
Thanks again.
bevanweiss said:
Thanks,
Yeah I guess I'll have to wait for the Oreo update later in the year.
I'm in Australia, which is why Android Pay works.
On doing the *#06# I do actually get two IMEI numbers reported, and I have actually had the second SIM work just recently, so maybe things aren't all so bad.
But it almost seems like it's not using all the bands available in AU (which pretty much matches the bands used in India, although AU has LTE B42 also).
I guess this is part of the modem flash.
So I'd just need the modem stuff from an Indian phone?
I guess I'll check what bands are reported and go from there.
Thanks again.
Click to expand...
Click to collapse
Dear @bevanweiss,
As both of your IMEI's are intact, I don't believe that its any problem with your phone. your phone is totally fine
I highly recommend you to try switching your sim 1 (putting sim1 as sim2 and sim 2 as sim1)
Moto G has 4G support on both slots however, only 1 slot at a time can stay on 4g.
I say this, because in India , we have a service provider (Reliance Jio) who only provides 4G and no 2g or 3 g bands.
When I first booted up my phne with jio sim in slot 1 and vodafone india sim in slot 2, the voda sim got registered 1st and even though jio sim was in slot 1, it did not have any network. Even if i change prefered network type of sim 2 to 2g or 3g, there was no choice (option) to select 4g on sim 1 as 4g option was still visible in sim 2 settings.
Solution that i used,-
1.removed both sims and inserted just jio sim in slot 1 and rebooted.
2.set it (Jio sim 1) as 4g,
3.pulled out the tray and added voda to sim2
I will be really glad if any of these details help you.
I recommend you to backup your EFS partition asap.