Related
The setup was fine, connected to my network, played Netflix and Youtube from various devices (phone, laptop, computer) no problems! (Interested in the Plex thread and others on here for locally stored video.. )
What is happening is very strange, however. I have a TV with multiple inputs (typical these days, right?) but after I've been 'casting' to the Chromecast, it takes several tries to change away from that input to another input (my Xbox, or HD antenna).
ALSO - the TV powers itself ON after a while! WHY IS THAT? I left and came back home and thought I had left the TV on - which is not like me at all! And later that night it turned on AGAIN after I went to bed. I unplugged the Chromecast just to get it to stop, but ideally, I would want to leave it plugged in all the time.
What is making the TV turn on?
Will moving my TV input to anything other than the Chromecast port stop it?
Is there a soft power-off option for the Chromecast device?
FractalSphere said:
The setup was fine, connected to my network, played Netflix and Youtube from various devices (phone, laptop, computer) no problems! (Interested in the Plex thread and others on here for locally stored video.. )
What is happening is very strange, however. I have a TV with multiple inputs (typical these days, right?) but after I've been 'casting' to the Chromecast, it takes several tries to change away from that input to another input (my Xbox, or HD antenna).
ALSO - the TV powers itself ON after a while! WHY IS THAT? I left and came back home and thought I had left the TV on - which is not like me at all! And later that night it turned on AGAIN after I went to bed. I unplugged the Chromecast just to get it to stop, but ideally, I would want to leave it plugged in all the time.
What is making the TV turn on?
Will moving my TV input to anything other than the Chromecast port stop it?
Is there a soft power-off option for the Chromecast device?
Click to expand...
Click to collapse
Sounds like you're having issues with their chrome cast's HDMI CEC. It can be used to automatically change inputs to the one the chrome cast is using and even turn on tvs.
You could disable HDMI control for your TV and it would prevent the issues from occurring.
Every manufacturer has a different name for their HDMI Control feature.
Who makes your tv, OP?
FractalSphere said:
The setup was fine, connected to my network, played Netflix and Youtube from various devices (phone, laptop, computer) no problems! (Interested in the Plex thread and others on here for locally stored video.. )
What is happening is very strange, however. I have a TV with multiple inputs (typical these days, right?) but after I've been 'casting' to the Chromecast, it takes several tries to change away from that input to another input (my Xbox, or HD antenna).
ALSO - the TV powers itself ON after a while! WHY IS THAT? I left and came back home and thought I had left the TV on - which is not like me at all! And later that night it turned on AGAIN after I went to bed. I unplugged the Chromecast just to get it to stop, but ideally, I would want to leave it plugged in all the time.
What is making the TV turn on?
Will moving my TV input to anything other than the Chromecast port stop it?
Is there a soft power-off option for the Chromecast device?
Click to expand...
Click to collapse
I would suggest to just unplug the USB when not in use if your TV is turning on, I know my brothers TV its a westinghouse turns on anytime something connected to it turns on like the xbox or ps3 or laptop
not so good to know. hope its fixed soon
Andrmgic said:
Sounds like you're having issues with their chrome cast's HDMI CEC. It can be used to automatically change inputs to the one the chrome cast is using and even turn on tvs.
You could disable HDMI control for your TV and it would prevent the issues from occurring.
Every manufacturer has a different name for their HDMI Control feature.
Who makes your tv, OP?
Click to expand...
Click to collapse
It's a Toshiba flat-screen, don't know the model. I'll put more detail up tonight when I can look. :silly: I also need to try having it off the Chromecast and starting a session and seeing if it draws the TV to that input. THAT would be nice, but the auto-powering on is a bad bug in my opinion.
My TV turns on automatically when just about anything powers on before the tv is on. Say I turn my ps3 on 1st, it will turn it on. Or plug a USB Flash drive in, turns it on. But, once in the HDMI spot, I can shut it down and it stays off. Very strange.
Sent from my SGH-T889 using Tapatalk 4 Beta
I have one TV in my house (Toshiba 55HT1U) that keeps getting turned on by the Chromecast. I turn the TV off, and then with a few minutes, the TV will be back on again. Unplug the Chromecast, and the TV stays off. I have tried multiple Chromecasts with the same results, I disabled Regza Link (Toshiba's HDMI-CEC), and it still keeps happening. This also happens whether the Chromecast is connected to my TV or to the receiver which is then connected to the TV. I have read where this particular TV suffers from this issue with other devices, but I wish there was a way to turn it off from the Chromecast end.
Right now, my solution is to go and unplug the Chromecast when I am not using it...hardly an elegant solution.
Have you check the manufacture website of your TV. I know some TV within the last few years, if it have a USB hook up, you can typically update the TV Firmware it may solve your problem. Just a shot in the dark. Also Chromecast is also getting an update.
jumpmanjay said:
I have one TV in my house (Toshiba 55HT1U) that keeps getting turned on by the Chromecast. I turn the TV off, and then with a few minutes, the TV will be back on again. Unplug the Chromecast, and the TV stays off. I have tried multiple Chromecasts with the same results, I disabled Regza Link (Toshiba's HDMI-CEC), and it still keeps happening. This also happens whether the Chromecast is connected to my TV or to the receiver which is then connected to the TV. I have read where this particular TV suffers from this issue with other devices, but I wish there was a way to turn it off from the Chromecast end.
Right now, my solution is to go and unplug the Chromecast when I am not using it...hardly an elegant solution.
Click to expand...
Click to collapse
GreenDroidX said:
Have you check the manufacture website of your TV. I know some TV within the last few years, if it have a USB hook up, you can typically update the TV Firmware it may solve your problem. Just a shot in the dark. Also Chromecast is also getting an update.
Click to expand...
Click to collapse
I have seen where some people have tried the update and it made no difference, but I will definitely try this when I get home tonight.
Find your HDMI-CEC options (whatever Toshiba calls it) and turn on HDMI-CEC but turn off Auto power. That will allow HDMI-CEC to switch to the right input but will not allow the HDMI-CEC to auto power the TV.
I have the exact same problem with a Toshiba 46G300U1 so let me know if you find a solution. It seems like a bunch of the Toshiba's all have this problem and I doubt Toshiba is going to fix it. I've tried various different kinds of options (connecting the Chromecast through a cable, a HDMI switch etc.). As long as the Chromecast is switched on and connected to the TV it always turns on automatically. Obviously disabling HDMI-CEC doesnt seem to help. I suspect there is a bug in the Toshiba that still keeps acting on HDMI-CEC signalsI am planning to file a support case with Chromecast as they are more likely to fix the problem (maybe an option to disable CEC on the Chromecast) than Toshiba. But since that is unlikely I am thinking maybe I can try a cable that doesnt properly support HDMI-CEC. It seems CEC is a separate wire and there are lots of people online complaining about cables that don't support CEC.
Try not powering your device via USB from the TV. (If you are) My LG TV seems to have issues with CEC from devices that get power from it via USB. Does weird stuff like this
So I tried updating the firmware on my TV...they said just put the new firmware on a USB stick, then plug the stick into the TV and it will automatically prompt you to start the install. Well, it didn't. I tried 2 different USB sticks with no success.
My "fix" was to just power the Chromecast WITH the USB port on the TV. That way the Chromecast is off when the TV is, so it won't try to turn it back on.
Great idea. I am connecting my USB cable to the TV's USB port for now. I might try connecting the Chromecast via my audio receiver later on. FWIW the firmware update did nothing to solve the issue on my TV.
I don't want to disable CEC on my TV, because I'd still like to have the CEC capability to turn on/off my home theatre automatically along with the TV. I can use USB power from the TV to power my Chromecast, but once the TV is on, my home theatre mutes automatically because it gives up control of CEC to chromecast. It's an unfortunate software decision made by Sony, the maker of my home theatre. I want the home theatre speakers to stay active, but Sony has programmed it to mute when another device on the same HDMI bus takes CEC control.
If you don't want your Chromecast to be a CEC-control device, meaning you don't want it turning your set on at all, or you don't want it overriding other CEC devices, just order lindy-usa.com part number 711110-1, which is a HDMI CEC Less Adapter, Female to Male, and put it inline with your Chromecast. It disables the CEC sense line from your Chromecast to your TV. Problem solved. Neall
My Chromecast is plugged into an HDMI input on my home theater receiver (Yamaha RX-V673) and powered externally from the wall. The HDMI output goes to my TV (6-yr old Samsung LNT4042H). I am streaming a browser tab (playing Grooveshark audio) to my home theater. Everything works fine, but I don't want to leave my TV on since I'm only listening to music. But when I turn the TV off, the audio stops too. Very perplexing, I'm not even sure whether or not to blame the Chromecast or the receiver, but I'm leaning toward the former (still no clue how to fix it though).
Any ideas? Thanks!
Weird. Dotés the TV INPUT to the hometheater ?
Sent from my X506-3G using xda app-developers app
grosmouton said:
Weird. Dotés the TV INPUT to the hometheater ?
Sent from my X506-3G using xda app-developers app
Click to expand...
Click to collapse
No. Weirder still, if the TV is already off when I start casting, it will cast successfully for a little while, but eventually the audio will cut out. If I then turn TV on, audio will come back.
The111 said:
My Chromecast is plugged into an HDMI input on my home theater receiver (Yamaha RX-V673) and powered externally from the wall. The HDMI output goes to my TV (6-yr old Samsung LNT4042H). I am streaming a browser tab (playing Grooveshark audio) to my home theater. Everything works fine, but I don't want to leave my TV on since I'm only listening to music. But when I turn the TV off, the audio stops too. Very perplexing, I'm not even sure whether or not to blame the Chromecast or the receiver, but I'm leaning toward the former (still no clue how to fix it though).
Any ideas? Thanks!
Click to expand...
Click to collapse
Do you have the USB plugged into the TV??
Sent from my Eclipsed Galaxy S4
mjdavis871 said:
Do you have the USB plugged into the TV??
Sent from my Eclipsed Galaxy S4
Click to expand...
Click to collapse
Nope, powered externally from wall as mentioned in OP. Although admittedly I did add that in an edit so even though you quoted it, perhaps you read before I added it. :angel:
Another weird observation... if I put my TV to another input, it works fine. This is almost a perfect workaround since if I put TV to a dead input, it is almost as good as being powered off. Not quite though.
The111 said:
Nope, powered externally from wall as mentioned in OP. Although admittedly I did add that in an edit so even though you quoted it, perhaps you read before I added it. :angel:
Another weird observation... if I put my TV to another input, it works fine. This is almost a perfect workaround since if I put TV to a dead input, it is almost as good as being powered off. Not quite though.
Click to expand...
Click to collapse
Sounds like either your receiver is "noticing" that the TV is off and going into some power save or something (check for input detection or options on a particular input), or your TV is doing the audio decode and feeding it back to your receiver via Audio Return Channel (ARC).
The latter is less likely simply because you get some audio at the start when the TV is off.
I tried looking in your receiver's manual, but it seems pretty complex (and powerful).
This page will let you download the manual without registering for a Yamaha account:
http://download.yamaha.com/search/product/?category_id1=16445&product_id=1645661
mjdavis871 said:
Do you have the USB plugged into the TV??
Sent from my Eclipsed Galaxy S4
Click to expand...
Click to collapse
bhiga said:
Sounds like either your receiver is "noticing" that the TV is off and going into some power save or something (check for input detection or options on a particular input), or your TV is doing the audio decode and feeding it back to your receiver via Audio Return Channel (ARC).
The latter is less likely simply because you get some audio at the start when the TV is off.
I tried looking in your receiver's manual, but it seems pretty complex (and powerful).
This page will let you download the manual without registering for a Yamaha account:
http://download.yamaha.com/search/product/?category_id1=16445&product_id=1645661
Click to expand...
Click to collapse
It does seem to be the receiver at fault, since I've tested and it happens with other HDMI sources. Went through the entire manual and tried changing every option that seemed like it might be related... no luck. Will continue my search elsewhere since this does not seem to be Chromecast related. Thanks anyway. :good:
The111 said:
It does seem to be the receiver at fault, since I've tested and it happens with other HDMI sources. Went through the entire manual and tried changing every option that seemed like it might be related... no luck. Will continue my search elsewhere since this does not seem to be Chromecast related. Thanks anyway. :good:
Click to expand...
Click to collapse
Probably something that can keep the HDMI connection alive, like Dr. HDMI or HDMI Detective might work, though I'd see about borrowing or trying one before spending money on it if possible.
Sent from a device with no keyboard. Please forgive typos, they may not be my own.
bhiga said:
Probably something that can keep the HDMI connection alive, like Dr. HDMI or HDMI Detective might work, though I'd see about borrowing or trying one before spending money on it if possible.
Sent from a device with no keyboard. Please forgive typos, they may not be my own.
Click to expand...
Click to collapse
Maybe that would work, but so does the complete opposite (killing the connection 100%). I've found that if I totally unplug my TV, then it works fine. The problem is that when the TV is "off" it is actually in standby mode which must still draw some power, and the receiver is aware of this via the HDMI connection, and for some dumb reason chooses to stop the audio stream because of it. If I unplug the TV, then the receiver loses awareness of it entirely and decides to play the audio again. Very stupid, but solvable for $10:
www.amazon.com/Woods-Extension-Switch-Remote-15-Feet/dp/B000KKND86/
I currently manually push the TV power button to turn it off... now I just have to use that button instead to totally cut it off from power.
I believe the receiver is to blame... but easier to spend $10 than try to make Yamaha fix a problem.
The111 said:
If I unplug the TV, then the receiver loses awareness of it entirely and decides to play the audio again. Very stupid, but solvable for $10:
www.amazon.com/Woods-Extension-Switch-Remote-15-Feet/dp/B000KKND86/
I currently manually push the TV power button to turn it off... now I just have to use that button instead to totally cut it off from power.
I believe the receiver is to blame... but easier to spend $10 than try to make Yamaha fix a problem.
Click to expand...
Click to collapse
If you can find an IR-triggered power cut off and you have a learning remote, you may be able to teach one of your remote buttons the signal and avoid getting up (yeah, I'm lazy).
Reminds me of the joke "if you lend someone $20 and never see them again, it might be $20 well spent."
Sent from a device with no keyboard. Please forgive typos, they may not be my own.
This is a very LONG SHOT and most likely NOT the problem...
But with most Amp to TV setups the Amp requires the TV to be on to get it's HDCP validation as the amp merely acts as a passthrough device.
Like I said it is a longshot but it is possible that some services may require HDCP to operate....
More likely though it is CEC sending a shutdown signal to the amp.
Or the Amp is timing out because it believes the Chromecast is a Video device and requires a monitor regardless of the fact that the Chromecast can do Audio Only as well.
The Amp itself really has no clue what is plugged into it...All it knows is HDMI gets sent to a Monitor and in your case it doesn't have a destination so shuts itself off.
Asphyx said:
The Amp itself really has no clue what is plugged into it...All it knows is HDMI gets sent to a Monitor and in your case it doesn't have a destination so shuts itself off.
Click to expand...
Click to collapse
The fact that totally cutting the power to the TV (at the wall) fixes everything would seem to disprove that statement (and the earlier one that HDCP from the TV might be required for it to work). But I really don't know for sure.
It could *possibly* be HDMI CEC messing with it.
death2all110 said:
It could *possibly* be HDMI CEC messing with it.
Click to expand...
Click to collapse
Yep!
Because Pulling the plug means no CEC command gets sent!
Thats what it is!
Asphyx said:
death2all110 said:
It could *possibly* be HDMI CEC messing with it.
Click to expand...
Click to collapse
Yep!
Because Pulling the plug means no CEC command gets sent!
Thats what it is!
Click to expand...
Click to collapse
Interesting. This CEC is new to me. I wonder how long it's been around... my TV (and the connecting cable) is from 2007.
No options in TV or Receiver anywhere to disable it, although the receiver specs do say that it has CEC. If it is CEC causing my issue, I wonder if something like this might help?
http://www.pulse-eight.com/store/products/110-cec-less-hdmi-cable.aspx
Of course it's only a foot long so I'd need a F-F connector to tack it onto the end of my existing cable.
The111 said:
Interesting. This CEC is new to me. I wonder how long it's been around... my TV (and the connecting cable) is from 2007.
No options in TV or Receiver anywhere to disable it, although the receiver specs do say that it has CEC. If it is CEC causing my issue, I wonder if something like this might help?
http://www.pulse-eight.com/store/products/110-cec-less-hdmi-cable.aspx
Of course it's only a foot long so I'd need a F-F connector to tack it onto the end of my existing cable.
Click to expand...
Click to collapse
CEC = Consumer Electronic Control
It's meant to help with the IR control and switching of inputs on Consumer devices
It was Introduced with the HDMI 1.2a Spec and expanded when HDMI 1.3 came out.
It's basically a control network for all the devices in a Home Entertainment system. Your supposed to be able to use one Remote to control everything....Works in Theory but most people have no clue how to get it to work! LOL
If you set your TV to your TUNER it should tell the Amp to switch to the Optical TV input automatically. And when you select BlueRay that goes through the amp the Amp should switch to that input and automatically change the input on the TV to see the Amp.
That Cable probably lifts pin 13 from connecting (isn't wired) which would take a particular device off the CEC Network.
But I would check both the Amp and TV settings first because by adding that cable you will have to switch inputs if you use the tuner on the TV and not just a set top box.If everything you own and watch goes through the amp the cable won't cost you any functionality other than TV remote working to change volume on the amp.
EDIT I don't suggest getting a Female to Female connector to barrel two cables together...
Better to get an extension HDMI cable that has a Female to Male cause every connector and connection can add noise and kill signal quality.
I have a opposite problem, chromecast keeps turning my TV on My Chromecast is connected to my Yamaha RX-A830 and I have a Samsung E8000 with 2013 Evolution kit. Every time I start playback on Chromecast, the TV is turned on. If I turn the TV off, the playback continues, but after some time (seems random to me) it turns the TV on again. Maybe that's when the playback stops for you? Because your TV does not support CEC and Chromecast thinks that there is no need to play anymore?
poisike said:
I have a opposite problem, chromecast keeps turning my TV on My Chromecast is connected to my Yamaha RX-A830 and I have a Samsung E8000 with 2013 Evolution kit. Every time I start playback on Chromecast, the TV is turned on. If I turn the TV off, the playback continues, but after some time (seems random to me) it turns the TV on again. Maybe that's when the playback stops for you? Because your TV does not support CEC and Chromecast thinks that there is no need to play anymore?
Click to expand...
Click to collapse
Hmm, I'm pretty sure I've ruled out the Chromecast, since it happens with Wii U in the same way. But it is still possible it could be as you describe, and the exact same thing is happening with the Wii U too.
poisike said:
I have a opposite problem, chromecast keeps turning my TV on My Chromecast is connected to my Yamaha RX-A830 and I have a Samsung E8000 with 2013 Evolution kit. Every time I start playback on Chromecast, the TV is turned on.
Click to expand...
Click to collapse
That's how it's supposed to work.
If you don't want the TV turning on, you'll need to disable CEC on your TV, or if it has an option, disallow CEC power on.
poisike said:
Because your TV does not support CEC and Chromecast thinks that there is no need to play anymore?
Click to expand...
Click to collapse
Chromecast doesn't care. It's still playing as turning the TV back on results in audio.
Really sounds like Yamaha thought it would be smart for the receiver to automatically switch off if the attached display is turned off.
My Sony sound bar has an auto-off feature too that has the annoying feature of turning off if I have my TiVo paused too long, so I turned off the sound bar's auto off and turned on my TV's option to turn off attached devices when powering off.
Sent from a device with no keyboard. Please forgive typos, they may not be my own.
Wii U does not support CEC.
My TV CEC is on and Power sync is disabled. Yet still Chromecast turns it on...
Yamaha receivers turn off when they get CEC command to do so. My Chromecast has never turned my Yamaha receiver off. I have Yamaha set to HDMI control "On" and Standby sync "Auto" which should accept CEC power down command only when the current source sends it.
This was driving me.crazy for days. My receiver would play chromecast on my LG tv but when plugged directly to any hdmi port on my LG tv, nothing would happen. My LG would say starting chromecast, then nothing, no signal. I tried all Google troubleshoot recommendations and nothing. Finally, when I changed the aspect ratio of my tv to 4:3 then unplugged and plugged the chromecast back in (movie was already being casted from Netflix) it finally recognized it and I was showing the movie! It worked on all hdmi ports, after being able to cast, i then changed the aspect ratio back to just scan or 16:9 . Hope this helps somebody
Sent from my HTCONE using xda app-developers app
No issues with my lg 2013 led 3d model. Set to 16:9 as normal and has always worked. Wonder if it is more a model specific issue. You should post your TV model info for others to compare as it isn't really "lg TVs" exactly
Sent from my SCH-R970 using Tapatalk
shelby04861 said:
No issues with my lg 2013 led 3d model. Set to 16:9 as normal and has always worked. Wonder if it is more a model specific issue. You should post your TV model info for others to compare as it isn't really "lg TVs" exactly
Sent from my SCH-R970 using Tapatalk
Click to expand...
Click to collapse
There have been many different TV's with this issue, especially with LG TVs. My sanyo has a similar issue, so I'm about to try this.
There have been many similar reports over on the chromcast google users forum:
https://productforums.google.com/forum/#!forum/chromecast
I just jumped on over there. A few here and there but there doesn't seem to be any rhyme or reason. What I am getting at is we really need model number of TV, how you have it setup, is powered by USB wall adapter or USB port on TV, extension vs no extension. If we can get model info and setup info we might be able to learn more. Even TV firmware will help. From there we might be able to find another person with the exact same TV to learn if they have the same issue or not. Just want to help of course so don't take this the wrong way. It could be something simple.
Sent from my SCH-R970 using Tapatalk
It could be something as simple as a timing issue, especially in the case where Chromecast is powered by TV USB port.
Counter-intuitive as it may seem, HDMI prefers being plugged in to a "live" receiver for the handshake to happen. If the TV doesn't listen to HDMI while powered "off" but Chromecast still gets powered, Chromecast might not negotiate the HDMI handshake properly - and that usually requires a disconnect and reconnect to renegotiate.
IMO Google should really push wall power more. TV power is asking potential trouble if the TV powers off the USB port while flashing an update. Unless the TV specifically supports connecting a USB hard drive, I don't expect it to have any sort of predictable power output. Yes, I know USB spec says it must, but I've had numerous USB hosts with variable output, or at least that's what USB Voltage Doctor tells me...
I actually did this this weekend....
I have my TV mounted to a wall like most people and there is a pair of dual outlets on the wall that the TV plugs into...
I replaced one of the standard AC outlets with one that had a single Grounded AC and Two USB ports and now power my CCast with those.
Most folks use the TV USB because it hides the wires but for the price of $5 you can replace a outlet and get a much better USB Power source.
shelby04861 said:
I just jumped on over there. A few here and there but there doesn't seem to be any rhyme or reason. What I am getting at is we really need model number of TV, how you have it setup, is powered by USB wall adapter or USB port on TV, extension vs no extension. If we can get model info and setup info we might be able to learn more. Even TV firmware will help. From there we might be able to find another person with the exact same TV to learn if they have the same issue or not. Just want to help of course so don't take this the wrong way. It could be something simple.
Sent from my SCH-R970 using Tapatalk
Click to expand...
Click to collapse
Someone over there, I'm assuming who works at google, keeps insinuating that they only have problems with TV's that have bad EDID's.
AustinMartin said:
Someone over there, I'm assuming who works at google, keeps insinuating that they only have problems with TV's that have bad EDID's.
Click to expand...
Click to collapse
Would be easy (but not free) to test with an EDID replacer like Dr. HDMI or HDMI Detective but to be honest I would expect other HDMI sources like DVRs and Blu-ray players to also have trouble if it was truly an EDID issue.
I know some very old (early days of HD) sets report they accept 1080p but don't actually display it, which is an EDID issue, but that really shouldn't be happening for anything modern.
bhiga said:
Would be easy (but not free) to test with an EDID replacer like Dr. HDMI or HDMI Detective but to be honest I would expect other HDMI sources like DVRs and Blu-ray players to also have trouble if it was truly an EDID issue.
I know some very old (early days of HD) sets report they accept 1080p but don't actually display it, which is an EDID issue, but that really shouldn't be happening for anything modern.
Click to expand...
Click to collapse
Yes, you would think, but google hasn't really made too much hdmi input equipment. The major things that are failing with hdmi issues are non-1080 native TV's such as 720 plasma's, and a lot of LG problems. I think that the latter additions to the edid standard to accommodate hdtv signals might be the issue.
Of course it would be nice if Google actually listed the TV sets that they are having issues with, but at least one person listed that when they talked to google support direct, they said that the one TV wasn't supported right now.
42Lw5300 from the wall outlet and from the tv usb both work
When I first got the cc it worked flawlessly on the tv hdmi input. Then I decided to plug it into my av receiver then when I went back to the tv recently, it wasn't working. All I got was , starting chromecast and then it would switch to the LG screensaver saying no signal. Numerous hard resets nothing..then I did the change screen format thing and it worked all the way
Sent from my HTCONE using xda app-developers app
I did the switch my tv thing to 4:3 after I notice when the cc starts it looks like the starting chromecast font was at a lower resolution...so by switching it I thought it would recognize my cc at that a lower resolution
Sent from my HTCONE using xda app-developers app
pelon90005 said:
I did the switch my tv thing to 4:3 after I notice when the cc starts it looks like the starting chromecast font was at a lower resolution...so by switching it I thought it would recognize my cc at that a lower resolution
Click to expand...
Click to collapse
AFAIK the Chromecast boot screen is 480p, but after that Chromecast will try to negotiate 720p or 1080p.
Aspect ratio (4:3 or 16:9) just determines how your TV handles the signal (don't stretch or anamorphic stretch) - it shouldn't change what the TV communicates.
I was also having problems with my LG television and Chromecast. Chromecast turned on via the LG's usb port but tv was pitch black. I had to pull the powercord off and plug it in 2-3 times before the tv worked. Turns out that the LG had faulty panel.. and the TV was like that from the first moment I bought it. Hooray for warranty! The tv was 2 weeks old when I had it repaired.
I have a LG 42ld450 TV that seems to not like my Chromecast very much. Whenever I plug it from either HDMI port, it just goes berzerk for no reason and turns on and off repeatedly. Sometimes it eventually proceeds to display the stream as normal for hours, sometimes it just lasts a little while before resetting over and over. It seems to be entirely random. I have disabled CEC to no avail. It works fine with my other TVs.
Could it be an electrical problem? I have it connected to a power strip that is connected to a power cord that ends in two prongs (even though it has a three-pronged input). However, I doubt it could be this since it only happens when the Chromecast is plugged in.
Sounds like a TV issue more than a Chromecast one if it doesn't have any issues with any other TV
Sent from my Nexus 6 using Tapatalk
If you have a friend who as a chromecast , ask him to do an exchange for a couple of days for testing purposes ..
Then you'll know if it your tv or chromecast
10$ its your tv or if you can turn off simplink in lg setting see if that help
Sent from my HTC One_M8 using XDA-Developers mobile app