Database Develop

[GUIDE] [5 Oct] How to install the V6 Supercharger/ Almost Project Butter tweaks

Hey all, i have been asked a few times lately how to install the v6 supercharger
So I have decided to finally make a tutorial thread
* Almost project butter build.prop tweaks are in post 3:
http://forum.xda-developers.com/showthread.php?p=3015977 *
-=The V6 SuperCharger=- brought to you by zepplinrox
Original thread: http://forum.xda-developers.com/showthread.php?t=991276
If you're thinking whether or not to install the script, areas all the positive comments in the thread
This will work on *almost* every ROM with a init.d folder in /system/etc/init.d
I haven't tested this on ROMs without one!
but its tested on nearly every incredible s ROM and on about 5 nexus 7 ROMs. You can use this guide on nearly every device, its universal as long as you meet the requirements
The last version I tested is U9RC11T6, on UKB II 1.3 and it works 100%
*Known to cause root problems sometimes with Nik's Project X 4.x* (Thanks to everyone who reported that)
Pretty sure its the busybox installed with the starter kit, maybe if you don't install the starter kit it will not have problems. If you test this, please report
Disclaimer: I, or zepplinrox or anyone here am not responsible for any damage caused to your phone. No one is forcing you to do this.
I did not impregnate your daughter or son
That said, its easy if you know what you are doing.
So, how to install on GB, ICS and JB
note: gingerbread does not need the patched services.jar so ignore that part if you are using a gingerbread ROM
UKB II and ARHD 3.0.x have the patched services.jar in them already, so don't panic if it doesn't ask you. Thanks to the devs for making supercharger installation easier
If you're having troubles on JellyBean, you might want to check out this post and the ones after it:
http://forum.xda-developers.com/showthread.php?p=31675038#post31675038 (Thanks to TheGratefulDead, hit his thanks button!)
1. Download the script from here
http://forum.xda-developers.com/showpost.php?p=18703418&postcount=5021
I downloaded Update 9 RC10 (tested up to U9RC11T6 working too) and also download the starter kit. Extract starter kit to the root of your sd card
2. Download script manager and busybox installer from the play store. Install latest version of busybox
3. Open up script manager, click on root when it comes up. Navigate to the supercharger starter kit folder, and click on the script 'start me up.sh'. Run as root by clicking the little superuser android icon, and let it install by following the instructions, they are easy to follow. When some, close the script
4. Now go back to the root of your sdcard in script manager and open up the V6 supercharger script and root permission, let it do what it has to do. Follow the instructions. When it asks you about a patched services.jar, say yes, and automatic install, it will automatically download and install. For reference, I used the 768HP settings on an AOSP ROM like ice cold and I used the min free calculator settings on sense ROMs like ARHD and project x
5. When is asks you, do a superclean and restart, your phone will reboot. If at any stage it stays on the splash screen for more than 5 mins, restart with adb or by holding vol down, vol up and power for 10 seconds. Avoid pulling the battery as it can cause bricks
6. After your phone reboots, go to /system/etc/init.d and click on the 99supercharger script. Set it to superuser and run at boot.
This is not needed as proven by some people but I recommended doing so, it won't cause harm to do it
7. reboot again
8. Go back to the installer script (the update9RC10 one or whatever you used) and run it again. It SHOULD say 100% supercharged. If it doesn't, you've probably done something wrong or you have an incompatibility
9. Press thanks for this post and zepplinrox's post for the supercharger
He worked hard to deliver this to us and I spent ages writing this
Click to expand...
Click to collapse
Any questions, post here but read through the posts, ask google or use search before asking, your question may have already been asked
Any errors in the guide or if I am not thorough enough for you, lemme know
If you guys need pictures I can post them
Happy supercharging!!
Sent from my Nexus 7

Pro tip:
The further down the menu list the supercharger setting is, the more aggressive it is
I.e 256mb settings will not close apps often
1000hp settings will close apps frequently, not recommended for this device
I would say to use either 512mb or 768 hp settings, or the min free values
Aggressive settings = more apps closed = more free ram
Lenient settings = apps left open = less free ram = more multitasking!
BUT 768hp settings on the ice cold ROM or any aosp ROM will give decent multitasking
If you're unsure about something, ask
Enjoy
Sent from my Nexus 7

The Almost Project Butter hack/tweak, thanks to flak0
Original post here: http://forum.xda-developers.com/showthread.php?t=1855722
The "almost project butter" build.prop tweaks, credits to flak0 from the GS3 forums
Press his thanks button!
flak0 said:
This is an attempt to speed up our GS3 faster than stock and somewhat close to JB and provide odex benefits to both system and data without having to Odex .I have been running this for 48 hours and wow.
Just follow the steps below. Any feedback is appreciated.
The dalvik dexopt flag change were found through research of android and the internet. Below is the procedure to get some serious butter melted from our Gs3 along with a smooth ride.
NANDROID-BACK UP- YOU HAVE WARNED
Step 1: Back up current build.prop
Step 2: Open current build.prop with a root explorer, any will do.
Step 3: copy and paste the lines below to the bottom of your build.prop
Step 4: comment out with # any existing lines that contain dalvik.vm.dexopt or windowsmgr.max_events_per_sec
Step 5: Save your build.prop make sure permissions are set correctly 0644
Step 6: reboot into reocvery and wipe dalvik cache(this is extremely important)
Step 7: reboot, dalvik cache will rebuild
Step 8: Enjoy the buttery smooth gs3
Code:
#Odex Tweaks
dalvik.vm.verify-bytecode=false
dalvik.vm.dexopt-flags=v=n,o=v,m=y
#UI Tweaks
windowsmgr.max_events_per_sec=300
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
persist.sys.ui.hw=1
ro.ril.disable.power.collapse=1
Click to expand...
Click to collapse
Follow the instructions. Don't worry about where it says "GS3" because it works on our device too, I am pretty sure its universal.
You can either delete or put a # in front of repeated lines. A # means it is not active/read.
Make sure to go to the linked thread and thank the person who originally posted the tweaks!

If you're up to it, or you can post some screenshots
Either I will happily post or link to in the op
Sent from my Nexus 7

markj338 said:
If you're up to it, or you can post some screenshots
Either I will happily post or link to in the op
Sent from my Nexus 7
Click to expand...
Click to collapse
If I were to take screenshots and upload it here, this thread will be flooded. So I'll pick the exquisite way of doing a tutorial
Sent from my potato chips using xda qwertyuiop

Thanks for the tutorial. It's good to see something written specifically for our device.

Wow, I installed as your instructions and it went great, 8.3 Rossi is now smoother and quicker than ever. THANKS FOR THE GUIDE, cause without it I probably wouldn't have tried it. Thanks for sharing!
Sent from my Incredible S using xda premium

Good one Mark
i spent the better part of a Saturday trying to figure out from the original thread
this should help a lot of ppl and i think everyone should use the supercharger.. it's really awesome
---------- Post added at 11:21 AM ---------- Previous post was at 11:20 AM ----------
And i think this should be STICKIED..
Just sent a request for it to be

zukri90 said:
If I were to take screenshots and upload it here, this thread will be flooded. So I'll pick the exquisite way of doing a tutorial
Sent from my potato chips using xda qwertyuiop
Click to expand...
Click to collapse
Alright, good luck with it just don't record it with an iPad or something with low resolution
letmedanz said:
Good one Mark
i spent the better part of a Saturday trying to figure out from the original thread
this should help a lot of ppl and i think everyone should use the supercharger.. it's really awesome
---------- Post added at 11:21 AM ---------- Previous post was at 11:20 AM ----------
And i think this should be STICKIED..
Just sent a request for it to be
Click to expand...
Click to collapse
Sorry I didn't create it a day earlier
Also, does anyone else agree that stickies don't get read? It's in another tab in the xda app that never gets pressed
No offence but that's the way I see it
And thanks everyone for the positive comments!
Sent from my HTC Incredible S

markj338 said:
Alright, good luck with it just don't record it with an iPad or something with low resolution
Sent from my HTC Incredible S
Click to expand...
Click to collapse
I call my camcorder, screen recorder. There's one in the play store.
Sent from my potato chips using xda qwertyuiop

markj338 said:
Also, does anyone else agree that stickies don't get read? It's in another tab in the xda app that never gets pressed
No offence but that's the way I see it
Click to expand...
Click to collapse
My script thread has 100k views and 1k replies so I guess somebody's reading it (usually not well enough though unfortunately)

Nonverbose said:
My script thread has 100k views and 1k replies so I guess somebody's reading it (usually not well enough though unfortunately)
Click to expand...
Click to collapse
At least its being read, but people will search for yours too
thanks for your thoughts though mate
And your script is amazing, plenty of threads link to it
Sent from my Nexus 7

markj338 said:
Hey all, i have been asked a few times lately how to install the v6 supercharger
So I have decided to finally make a tutorial thread
-=The V6 SuperCharger=- brought to you by zepplinrox
Original thread: http://forum.xda-developers.com/showthread.php?t=991276
If you're thinking whether or not to install the script, areas all the positive comments in the thread
This will work on every ROM with a init.d folder in /system/etc/init.d
I haven't tested this on ROMs without one!
but its tested on nearly every incredible s ROM and on about 5 nexus 7 ROMs. You can use this guide on nearly every device, its universal as long as you meet the requirements
Disclaimer: I, or zepplinrox or anyone here am not responsible for any damage caused to your phone. No one is forcing you to do this.
I did not impregnate your daughter or son
That said, its easy if you know what you are doing.
So, how to install on GB, ICS and JB
note: gingerbread does not need the patched services.jar so ignore that part if you are using a gingerbread ROM
Any questions, post here but read through the posts, ask google or use search before asking, your question may have already been asked
Any errors in the guide or if I am not thorough enough for you, lemme know
If you guys need pictures I can post them
Happy supercharging!!
Sent from my Nexus 7
Click to expand...
Click to collapse
THANK YOU , quick question.. can i use the layout type thing you done in your sig? i like how you have the phone name then the mods seperated by |

naathaanb96 said:
THANK YOU , quick question.. can i use the layout type thing you done in your sig? i like how you have the phone name then the mods seperated by |
Click to expand...
Click to collapse
What do you mean? Are you asking for permission or how to do it?
Cause if its permission of course, I didn't come up with the idea
Nonverbose convinced me to change it because it was too big lol
Sent from my Nexus 7

markj338 said:
What do you mean? Are you asking for permission or how to do it?
Cause if its permission of course, I didn't come up with the idea
Nonverbose convinced me to change it because it was too big lol
Sent from my Nexus 7
Click to expand...
Click to collapse
i didnt wanna make it look like i was stealing your sig

naathaanb96 said:
i didnt wanna make it look like i was stealing your sig
Click to expand...
Click to collapse
Oh alright, that's okay anyway, I see it as setting an example
BACK ON TOPIC
has anyone used the guide yet? It definitely works because I install the script every few weeks when I flash a new ROM
Just wanting to know if there is enough depth/clarity
Sent from my Nexus 7

markj338 said:
Oh alright, that's okay anyway, I see it as setting an example
BACK ON TOPIC
has anyone used the guide yet? It definitely works because I install the script every few weeks when I flash a new ROM
Just wanting to know if there is enough depth/clarity
Sent from my Nexus 7
Click to expand...
Click to collapse
it deff felt alot faster after a reboot. it seems to open things quicker . ill give it some time for that supercharger to set in haha.

naathaanb96 said:
it deff felt alot faster after a reboot. it seems to open things quicker . ill give it some time for that supercharger to set in haha.
Click to expand...
Click to collapse
It doesn't really need to settle like a ROM does, just open apps as you normally would and it will be in effect like the script says something like 'supercharge in effect immediately'
since your x5 has less ram than the incredible s, it would probably be a good idea to put it on that I find supercharger more effective when the ram is running low, like on sense ROMs or low ram devices
Sent from my Nexus 7

markj338 said:
It doesn't really need to settle like a ROM does, just open apps as you normally would and it will be in effect like the script says something like 'supercharge in effect immediately'
since your x5 has less ram than the incredible s, it would probably be a good idea to put it on that I find supercharger more effective when the ram is running low, like on sense ROMs or low ram devices
Sent from my Nexus 7
Click to expand...
Click to collapse
my mums using the x5 atm until she gets a iphone 5 when they come out lol. im trying to make her get the galaxy s3 or next galaxy device so i have something to play with but yeah the x5 has a custom rom on it so ill tell her im updating it then put supercharger on it

naathaanb96 said:
my mums using the x5 atm until she gets a iphone 5 when they come out lol. im trying to make her get the galaxy s3 or next galaxy device so i have something to play with but yeah the x5 has a custom rom on it so ill tell her im updating it then put supercharger on it
Click to expand...
Click to collapse
I Hate messing with other peoples devices
Especially when they ask me to do it, I don't feel safe to do it
I was recently asked to do a gs2 but I have never touched a rooted one, I don't want to be screwing around with one
Then again, this is your old phone so totally understandable mate
Sent from my Nexus 7

The Gaming of our LG Optimus 4X HD

As we all know the gaming at Our Phone isnt really good some report it's Slow beacause theres only 1 core online. But there is an solution for this!
Thread with the Stuff for the terminal Is also here: ( http://forum.xda-developers.com/showthread.php?t=2253921 ) But I was really lazy of doping this commands so, i were Going on the internet and found something to download! I'll put the file into the Attachments! How to install this.....
Requirements;
Root.
A Root file explorer to get into your system files...
A brain to reed this careful.
What to Do;
Extract the Zip Thats in the attachmnts.
Get it onto your phone. (internal External doesnt matter I suggest Internal)
Go to your file explorer And past the file in: System\Etc\Init.d\
And set Permissions!
Reboot.
Enjoy Gaming!

I didn't try it . But it won't work without adding the line :-
Code:
#!/system/bin/sh
In the top of that script . Which tells the system to sh this test .
And you forot to mention fixin permission.
Also this needs init.d kernel support or busybox run-parts in order to run this script every reboot .
Correct me if I'm wrong
Thanks for sharing .
Sent from my LG-P880

$Parker said:
I didn't try it . But it won't work without adding the line :-
Code:
#!/system/bin/sh
In the top of that script . Which tells the system to sh this test .
And you forot to mention fixin permission.
Also this needs init.d kernel support or busybox run-parts in order to run this script every reboot .
Correct me if I'm wrong
Thanks for sharing .
Sent from my LG-P880
Click to expand...
Click to collapse
SManager will run the script when klick "is script"...

Fladder72 said:
SManager will run the script when klick "is script"...
Click to expand...
Click to collapse
When you use smanager it's an app that is designed to run scripts .
But if it was in the init.d folder you must add that line to tell the kernel that this test is a script . And the kernel will use the sh binary to run it .
Sent from my LG-P880

@deownagee
Thank you for sharing my Script! I don't know why you make another Thread for that!
And if you quote instructions, please quote the whole Text! You forgot the important Part! You have to set Permissions!
@$Parker
This Script works also without this first line! In the init.d Folder it is not needed!

Holzi001 said:
@deownagee
Thank you for sharing my Script! I don't know why you make another Thread for that!
And if you quote instructions, please quote the whole Text! You forgot the important Part! You have to set Permissions!
@$Parker
This Script works also without this first line! In the init.d Folder it is not needed!
Click to expand...
Click to collapse
Thank you for letting me know even. And I've made this one beacause your Script wasn't clear for me so i couldn't understand you know?

just for making sure, you guys do know what this script does?
it makes the GPU to run always (!!!) on max speed. this will reduce the battery life extremely.
this script should not be ran at every boot. you better only run it when you want to play games (and maybe reboot afterwards, or write a "undo" script)

@laufersteppenwolf
I think the Battery Drain is not the main Problem. It isn't higher than without that Tweak.
But i have one Question!
Is it possible for you to implement this Tweak in your kernel?
So when you selected the Gaming Governor, that this tweak is also active. And if you turn off the Gaming Governor again, the tweak is terminated.
I don't know if it's possible, so i ask you.

can i use it on rooted v20B locked bootlader? there is no init.d folder in system\etc\, should we create that folder manually?
what is the permission? thanks

Holzi001 said:
@laufersteppenwolf
I think the Battery Drain is not the main Problem. It isn't higher than without that Tweak.
But i have one Question!
Is it possible for you to implement this Tweak in your kernel?
So when you selected the Gaming Governor, that this tweak is also active. And if you turn off the Gaming Governor again, the tweak is terminated.
I don't know if it's possible, so i ask you.
Click to expand...
Click to collapse
"better battery" could only be caused by the first command (unlink). the others only increase the batter usage.
this tweak is (partly (the unlink)) implemented in my rom. but i'm working on unlinking in the kernel of course.
about the idea about gaming: yeah i do have something in mind, but it's gonna be a bit different just wait and see right now i'm working on OC'ing the GPU, and then we can do such changes.

Guys is it the same as http://www.android-experience.de/board/index.php?page=Thread&threadID=47 ? I dont speak german and google translate is weird. What about this, anybody tried ?
Post #5 oki its the same.

Stanley- said:
Guys is it the same as http://www.android-experience.de/board/index.php?page=Thread&threadID=47 ? I dont speak german and google translate is weird. What about this, anybody tried ?
Post #5 oki its the same.
Click to expand...
Click to collapse
I've translated and it's same lol (I'm Dutch and it's like German.)

But anyway i cant set premission via root explorer or antything else and cant copy to /system/ folder... I have rooted phone and checked via root checker. Love this phone problems with everything, maybe reflash will help but i dont have time for that.

Isn`t this the same as using tegra overclock under GPU Clock section? It`s paid but it`t really worth it!

gabrielgon said:
Isn`t this the same as using tegra overclock under GPU Clock section? It`s paid but it`t really worth it!
Click to expand...
Click to collapse
It is the same!

gabrielgon said:
Isn`t this the same as using tegra overclock under GPU Clock section? It`s paid but it`t really worth it!
Click to expand...
Click to collapse
it's actually taken from there

Ok Guys! The Werewolf alpha2 Kernel from laufersteppenwolf is much better than this Tweak! For all who use CM 10.1, flash this Kernel!
Don't forget to delete this Script if you flash the Kernel!

[email protected] this sh1t get hot before you try any game...

One true: LG + nVidia sucks. That's all.

Winudert said:
One true: LG + nVidia sucks. That's all.
Click to expand...
Click to collapse
Well that wasnt OT was it?
Atleast my nVidia graphics card + LG monitor = GREAT
And i love this phone
Sent from my LG-P880 using xda app-developers app

[Q] [UPDATED] Probelm Bootloop error with dsixda's kitchen cooked ROM

Hello guys:laugh:
I searched every forum thoroughly but didn't found a proper and working solution for Xperia devices
I am trying to make a custom ROM from stock using dsixda kitchen
I used stock 12.1.A.201 as the base ROM
I believe that it's either the updater script error or kernel probelm as I am using stock kernel and my zip is like this
Data
META-INF
system
boot.img
check_data_app
Click to expand...
Click to collapse
This happens when rom is created
De-odexed it rooted it and added X-Reality engine and created the rom
First on installing I got error of status 0 so I changed my update binary file from same de-odexed version from this link http://forum.xda-developers.com/showthread.php?t=2704312 by @dipesh1502 (thanks to him for that awesome rom)
Next I am getting error status 7
ROM Starts flashing then it comes to this part
formatting system bla bla
expected 5 args got 3
Click to expand...
Click to collapse
something like that and then it stops on error status 7
here is the updater-script please have a look. I really want to create this ROM. Please help
Updater-Script Download
here is my build prop build.prop download
Help guys please I'll be highly grateful
My device is C5302 rooted and unlocked bootloader with 12.1.A.205 stock kernel
EDIT : Got past the error status 7 now ROM gets installed
But unfortunately now it ends in a bootloop :/ Got stuck on Sony splash logo and then reboots constantly :/
Had a nandroid backup ready x)
Had to flash the ftf file over and over again. :/
Phone is allright just want to catch this error of bootloop.
I changed kernel with the dipesh1502's ROM but still no luck. Modified Updater script but still no luck. help me I am soo confused and screwed!! :'( :'(
My new Updater-Script

There's a HUGE difference in creating boot animations and creating a ROM.
Don't expect to teach yourself how to make a ROM in just a few days.
It takes, weeks, months, years...
If you're mainly planning to make some exterior changes, which I think you're currently doing, I would focus on making complete themes and not ROMs.
People are not waiting for a ROM which is already available but that looks somewhat different and maybe has some extra or removed apps.
Regarding your problem, I will not be able to help you since I don't have that kind of knowledge.
Anyway, good luck!

Gamm86 said:
There's a HUGE difference in creating boot animations and creating a ROM.
Don't expect to teach yourself how to make a ROM in just a few days.
It takes, weeks, months, years...
If you're mainly planning to make some exterior changes, which I think you're currently doing, I would focus on making complete themes and not ROMs.
People are not waiting for a ROM which is already available but that looks somewhat different and maybe has some extra or removed apps.
Regarding your problem, I will not be able to help you since I don't have that kind of knowledge.
Anyway, good luck!
Click to expand...
Click to collapse
Thanks for the reply.
Yeah I know that it's not easy to create ROM and also it takes a lot of time. I am ready to give it a shot
I am just making some small changes just for my sake I'll be using this ROM personally for my own use I know that there are a thousand times better ROM's than mine
Anyway glad you considered my probelm.

Bootloop can be cause by:
- Wrong permissions
- Corrupt installation
It is nice if you collect either the last_ksmg or logcat when bootlooping. (if possible)
~~Regard
---------- Post added at 08:08 PM ---------- Previous post was at 08:04 PM ----------
But first:
Share me the .zip you have created perhaps I can take a small look
~~ Regards

mrjraider said:
Bootloop can be cause by:
- Wrong permissions
- Corrupt installation
It is nice if you collect either the last_ksmg or logcat when bootlooping. (if possible)
~~Regard
Click to expand...
Click to collapse
Thanks for the reply
Can you please have a look at my new updater-script and tell me what is wrong?
I will surely try to get logcat but before that if you can just analyze this updater-script and pinpoint the mistakes it'll make my work a lot easier.
Thanks in advance :good:

Sent me the entire .zip file instead (but start with updater-script)
~~Regards

mrjraider said:
Sent me the entire .zip file instead (but start with updater-script)
~~Regards
Click to expand...
Click to collapse
Sure thing I'll
I am compressing it to maxium extent using KGB archiver and it'll become around 10~20 mb only
It's still compressing so it'll take some time before it reaches it's max compression.
I'll surely send you asap

[Q&A] [JANICE][OFFICIAL][DEVELOPMENT] - CrystalPA 6.00 - Android 4.4.4 - CRX Team

Q&A for [JANICE][OFFICIAL][DEVELOPMENT] - CrystalPA 6.00 - Android 4.4.4 - CRX Team
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [JANICE][OFFICIAL][DEVELOPMENT] - CrystalPA 6.00 - Android 4.4.4 - CRX Team. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Good to see someone doesn't forgot our mob :highfive:

When update ??.. project lost ???

Where is t
Where is the download link for v8.00 ? I found only 7.00 in the website :/

Where can i download the gapps?

MuhdMuzakkir said:
Where can i download the gapps?
Click to expand...
Click to collapse
Anywhere. Just search XDA 4.4.4. gapps.

Problems
Can't download the file from crxteam page. do you guys have a new link?

Can anyone tell me how to replace keyboard apk in system folder ? Do I need to resign the apk? Or what am I missing? Seems that Whatever I try, it doesn-t want to work at all ( with custom keyboards )

pictorul20 said:
Can anyone tell me how to replace keyboard apk in system folder ? Do I need to resign the apk? Or what am I missing? Seems that Whatever I try, it doesn-t want to work at all ( with custom keyboards )
Click to expand...
Click to collapse
You can just put it in data, no need to be in system partition. And probably it is because it is not signed.
P.S. Try to put same permission like on other apks there. 644

shut_down said:
You can just put it in data, no need to be in system partition. And probably it is because it is not signed.
P.S. Try to put same permission like on other apks there. 644
Click to expand...
Click to collapse
to make things clearly, maybe i didin-t say all the right story ............. I am trying to make a full blacked out rom ( Fully with only hdpi icons ) so ........ that all been said , I need every apk to be modified in order to achieve this goal ( I must to confirm, I gained some more free ram and more space for installing apk-s ) so .......... thing is ........... i get errors with camera2.apk and with latinIME.apk everytime I try to repack the apk and replace with the quote stock keyboard . no matter if i try to sign/unsign it ......... it doesn„t like the repack process or maybe I-m missing something? Maybe it needs to be recompiled? I did this method for every other apk that can be found in system folder, without problems. Only camera 2 and LatinIME gave me those nasty errors.....maybe they are repacked in other way ?
P.S : I-m on dark cm rom , so yeahh........ that-s my experiment rom .
L.E : I found out that I don-t have to repack the apk. I only need to zip it normally without any modification like decompiling or whatever else

pictorul20 said:
to make things clearly, maybe i didin-t say all the right story ............. I am trying to make a full blacked out rom ( Fully with only hdpi icons ) so ........ that all been said , I need every apk to be modified in order to achieve this goal ( I must to confirm, I gained some more free ram and more space for installing apk-s ) so .......... thing is ........... i get errors with camera2.apk and with latinIME.apk everytime I try to repack the apk and replace with the quote stock keyboard . no matter if i try to sign/unsign it ......... it doesn„t like the repack process or maybe I-m missing something? Maybe it needs to be recompiled? I did this method for every other apk that can be found in system folder, without problems. Only camera 2 and LatinIME gave me those nasty errors.....maybe they are repacked in other way ?
P.S : I-m on dark cm rom , so yeahh........ that-s my experiment rom .
L.E : I found out that I don-t have to repack the apk. I only need to zip it normally without any modification like decompiling or whatever else
Click to expand...
Click to collapse
Read part titled Signing: http://forum.xda-developers.com/showthread.php?t=2295002

Hi, i used the 8.00ver, but camera apk doesn't work. How can i solve this probleme?

Mocsokba said:
Hi, i used the 8.00ver, but camera apk doesn't work. How can i solve this probleme?
Click to expand...
Click to collapse
Just curious: where did you get CPA 8.00.
AFAIK ver 7.00 is the latest one for the SGSA.

rog_star said:
Just curious: where did you get CPA 8.00.
AFAIK ver 7.00 is the latest one for the SGSA.
Click to expand...
Click to collapse
Sorry, your right. I was on 7.00ver

Hello devs, and thank you for sharing your ROM with us.
I got a question. When I got missed call notification for the very first time after installation I have swiped it to the left. Then, i was asked if I want to enable opening apps in floating window after swiping notification to the left. I pressed "Yes", but now I regret that decision. Now, the question - how to disable opening app in window after swiping notification? I cannot find any kind of settings.

davider said:
Hello devs, and thank you for sharing your ROM with us.
I got a question. When I got missed call notification for the very first time after installation I have swiped it to the left. Then, i was asked if I want to enable opening apps in floating window after swiping notification to the left. I pressed "Yes", but now I regret that decision. Now, the question - how to disable opening app in window after swiping notification? I cannot find any kind of settings.
Click to expand...
Click to collapse
@davider Go to setting - Backup & reset - reset prefernce...i think there should be reset option to disable floating window

new version
a new version 8.50 is available on the crx site, dont know about the stability any one tried it?

[Q&A] [ROM][5.0.2][KFHD7][Unofficial]BeanStalk5.0 Lollipop

Q&A for [ROM][5.0.2][KFHD7][Unofficial]BeanStalk5.0 Lollipop
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][5.0.2][KFHD7][Unofficial]BeanStalk5.0 Lollipop. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Antutu ?
What's your highest score on Antutu ?

MisterGame7Web said:
What's your highest score on Antutu ?
Click to expand...
Click to collapse
Haven't checked but I'll run a test for you and post back, also just to let you know these tests arent quite accurate!

problem with Beanstalk for Kindle Fire HD
I just flashed Beanstalk onto my Kindle, also Gapps, and SuperSU without problems. However, when I was setting up my tablet, the Google setup option was skipped and when I go to Setting/Accounts/Add account, the screen flashes and does not prompt me to add any information. I rebooted twice, and tried again twicr, with the same outcome. All else about this ROM is working fine.

same issues here
Quote:
Originally Posted by androidnewbie123
After booting the tablet, system wizard keeps crashing. Any ideas on what to do here?
Which gapps are you flashing after ROM?
im using the google stock package.
so after i got the same error i wiped everything on my kfhd7, now my PC doesn't read my my kindle. i can no longer copy paste the files to the sd. to try and reflash the rom.

I just realized that CM12 is finally out and that there are versions for KFHD! I'd like to ask a few questions since I haven't installed any L roms yet and am wondering about a bunch of stuff.
I've been running the PAC rom until now, the KitKat version and although it was very nice at first it's really laggy now so I'm hoping for a decent change. Is L really better as far as performance goes? :/
Also, in the bugs it said about some option in settings FC'ing? I know it's silly to ask, but what does FC stand for? >.< (I know... sorry...)
If I want updates do I have to check in your post in XDA, or are there OTA's available?
Hope I'm not spamming, I thought it'd be better to ask here than creating a new post in Q&A even though I haven't flashed it yet...
Thanks for taking the time to read this (and hopefully reply ^_^)

Question: I'm running the 20/01 update. I never had issues with the performance tab crashing but I can't put the performance in 1500, it can go below 1200 but completely ignores me when I try to take it higher. So here's my question. Is it a kernel issue? I've never installed a custom kernel (unless it can be installed when flashing a ROM), dunno how it works. Also which settings in performance are recommended for my kindle to be as fast as possible and can increasing it to 1500 damage my kindle?

Stuck
1st and foremost 1000 apologies if this has been answered in the discussion thread. I keep getting an error while installing the latest beanstalk ROM. I'm currently on twrp 2.7.0.0, running the latest cm 11 nightly. I've downloaded the beanstalk ROM, super su, and mini pa gapps. I usually fix all my mistakes or problems by myself but I keep running into this one. As soon as I do a full wipe and install, it errors and brings me back to install zip screen. Pleas any assistance would be great.
---------- Post added at 08:11 PM ---------- Previous post was at 07:41 PM ----------
1st and foremost 1000 apologies if this has been answered in the discussion thread. I keep getting an error while installing the latest beanstalk ROM. I'm currently on twrp 2.7.0.0, running the latest cm 11 nightly. I've downloaded the beanstalk ROM, super su, and mini pa gapps. I usually fix all my mistakes or problems by myself but I keep running into this one. As soon as I do a full wipe and install, it errors and brings me back to install zip screen. Please any assistance would be great. Oh and I almost forgot. The log says that the zip signature failed. If that helps. Thanks again

fsh27b said:
1st and foremost 1000 apologies if this has been answered in the discussion thread. I keep getting an error while installing the latest beanstalk ROM. I'm currently on twrp 2.7.0.0, running the latest cm 11 nightly. I've downloaded the beanstalk ROM, super su, and mini pa gapps. I usually fix all my mistakes or problems by myself but I keep running into this one. As soon as I do a full wipe and install, it errors and brings me back to install zip screen. Pleas any assistance would be great.
Click to expand...
Click to collapse
Perhaps you could try going in TWRP => Mount and uncheck System and then try again. Oh, and if you have questions/issues go to the actual Beanstalk thread and ask (I'm saying that for future reference), they reply instantly there, I've posted in Q&A a bunch of issues but they haven't replied Anyway, good luck! Ask again if it doesn't work! Oh, in general when flashing Beanstalk I do a wipe on System as well, I never encountered any problems when flashing it.

YuriPan said:
Perhaps you could try going in TWRP => Mount and uncheck System and then try again. Oh, and if you have questions/issues go to the actual Beanstalk thread and ask (I'm saying that for future reference), they reply instantly there, I've posted in Q&A a bunch of issues but they haven't replied Anyway, good luck! Ask again if it doesn't work! Oh, in general when flashing Beanstalk I do a wipe on System as well, I never encountered any problems when flashing it.
Click to expand...
Click to collapse
I actually solved it on my own. Unfortunately I read you post on the main thread, but since I don't have at least 10 posts. I'm not allowed to post on the main thread. I kept getting the error zip file signature verification. I just happened to tumble into the settings and unchecked that. It went smooth from there. The double post happened when I tried to copy and paste it into the main thread. Hence I found out I'm not allowed to post there. Thanks for responding to my post though.

fsh27b said:
I actually solved it on my own. Unfortunately I read you post on the main thread, but since I don't have at least 10 posts. I'm not allowed to post on the main thread. I kept getting the error zip file signature verification. I just happened to tumble into the settings and unchecked that. It went smooth from there. The double post happened when I tried to copy and paste it into the main thread. Hence I found out I'm not allowed to post there. Thanks for responding to my post though.
Click to expand...
Click to collapse
No worries. Jee this thing with 10 posts is annoying, when I first joined XDA I already knew how to root etc and I bricked my kindle trying to install TWRP, but I didn't have enough posts to post in the development thread. Glad you figured it out! Beanstalk is a pretty nice rom, it works amazing for me, you'll probably find it much speedier than KK

Help ;-;
I was booting Beanstalk 5.0 on my Kindle Fire HD 7'. I flashed everything, but literally everything pops up saying it stopped. I cannot do anything on it, what do I do?

So how long does it take for first time boot up?
I'm hoping it's just loading up and not frozen on this black screen with no boot animation
It's been half an hour now.

gilleanaellig said:
So how long does it take for first time boot up?
I'm hoping it's just loading up and not frozen on this black screen with no boot animation
It's been half an hour now.
Click to expand...
Click to collapse
I can't tell you with certainty if you flashed the latest version but it took about 15-20 mins for me when first flashed.

YuriPan said:
I can't tell you with certainty if you flashed the latest version but it took about 15-20 mins for me when first flashed.
Click to expand...
Click to collapse
I got it to work now. Waited almost two hours and then gave in to restarting it.
That fixed it apparently haha.

gilleanaellig said:
I got it to work now. Waited almost two hours and then gave in to restarting it.
That fixed it apparently haha.
Click to expand...
Click to collapse
Hehehe cool. Glad you figured it out

Netflix
Is there any way to get Netflix to work with this rom? I can log in, select a user, and all the programs will populate on the screen. When I choose a program, it just sits there and spins the red circle never loading the program.

Refer to my question in the main thread for beanstalk about my wakelock and *alarm* issues

Is it possible to load lollipop onto a kindle fire HD (3rd gen).. a couple of the things i've seen so far are saying i need a fast boot cable and that there is no possible way to backup this model kindle.. Are these true? Thanks guys.

I can't download the gappas because the page of the links is close. Could someone send me the gapps link or something?
Sorry my bad English
Thanks