Related
This thread is primarily intended for n00bs.
I would like to say thanks to xda forum members: Noejn, Zecanilis, drellisdee, The_ERROR etc. Also thanks is due to Godlike! at tech-mania.com for his tutorials. Thanks is due especially to The_ERROR for proofreading the post and to other users for their suggestions written in the thread.[/SIZE]
---------------------------------------------------------------------------------------------
NEW - 3 May 2011 - Simplified Guide to Root & install version 1.2 of Custom Thunderg Recovery by AmonRa/modified by Drellisdee on LG P500
ALWAYS MAKE A BACKUP BEFORE CUSTOMISING YOUR PHONE.
[CUSTOMISING A PHONE USUALLY INVOLVES: ROOTING >>>> INSTALLING CUSTOM RECOVERY >>>> INSTALLING CUSTOM ROM]
The instructions written below have been tested by me using an Indian unbranded GSM model of LG P500 which came with stock Android 2.2.1 (V10C). The procedure to be followed for any LG P500 phone is the same.
This post is split into 4 major sections -
1. INSTRUCTIONS FOR ROOTING
2. INSTALLING ANDROID SDK ON A WINDOWS PC (This step is needed to install Custom Recovery on phone using adb from PC. Can be omitted if Recovery is installed from phone using Terminal Emulator)
3. INSTALLING A CUSTOM RECOVERY
4. INSTALLING CUSTOM ROMs
MUST READ: If you haven't read this thread already, please do read it - Dictionary for n00b - What is.../What does ...mean?
---------------------------------------------------------------------------------------------
1. INSTRUCTIONS FOR ROOTING
To know your present firmware version - Go to Settings/About Phone
Only phones which come with stock android 2.2 could be rooted till recently.
UPDATE - 24 April 2011 : A tool called 'GingerBreak APK' is able to root phones running stock android 2.2, 2.2.1 & 2.2.2. Read about it HERE. This tool enables rooting without the need for downgrading the firmware to 2.2. If 'GingerBreak APK' doesn't work out for you, continue reading to understand the procedure to root your phone after downgrading your firmware. Note: 'GingerBreak APK' permanently roots your phone. Also,GingerBreak might not install BusyBox and SuperUser apps properly on your phone. These apps are required by many rooted apps for their proper functioning. So, use Root Checker from android market to verify the proper installation of these 2 apps.
If your phone runs stock android 2.2, enable 'USB Debugging' on Phone (Settings/Applications/Development). Install z4root (copy the apk file to the sd card and open the file after browsing to the location using the phone's file manager), run it and root the phone. Find it HERE.
Choose the permanent root option as it is still possible to force unroot if needed.
Restart the phone and launch z4root to check the root status. A successful rooting should show 'Unroot' option when z4root app is opened.
{Note: z4root automatically installs Busybox and Superuser application(which appears as an icon in your app drawer) on the phone.}
If rooting fails with z4root, there is another application called SuperOneClick which can root your phone. Read about it HERE
For phones that came with stock 2.2.1 or 2.2.2 installed, rooting first involves downgrading the firmware to 2.2.
Downgrading the firmware can be done with KDZ-FW-UPD.exe (procedure outlined below)
(KDZ-FW-UPD.exe has been claimed to work best with windows xp 32bit.)
FIRST: DOWNLOAD THE Android 2.2 FIRMWARE FOR YOUR DEVICE. For this, go to: [ROMS] Original LG Firmware list and read about the procedure to download the original firmware.
{Tips: Use Ctrl+F in browser to search for Country name, Remember to change the alphabet in 2 places in the final link to download the firmware, Do not bother about the 'CDMA' tag attached to country code. It works for the GSM model phones too. If the link to find out the country codes doesn't work, use the 2nd method mentioned in the post to find out the country code using your phone's IMEI or ESN number }
Download the required Firmware onto your PC.
Links to Original firmware versions for Indian P500 are mentioned in THIS POST
Procedure to install original firmware using KDZ-FW-UPD.exe ( KDZ FIRMWARE UPDATER ) This procedure can also be used to restore the stock firmware and recovery onto your phone in case you want to give your phone to the service centre during warranty period as the phone will appear similar to as you bought it from the store.
[Note: This procedure was used to install V10B_00.kdz(android2.2) over V10C_00.kdz(android2.2.1) on an unbranded Indian GSM model of LG P500 using a Windows 7 Ultimate 64bit updated to date PC.]
1. Install LG PC Suite IV from SD card which came with phone by connecting the phone to PC through USB cable. This is done to install the drivers for the phone on the PC (the procedure is as follows)
- Enable the 'USB Mass Storage Only' mode in the phone's Settings/SDcard & Phone Storage menu.
- Connect phone to PC with the USB Cable.
- Press the 'Turn on USB Storage' button which appears on phone.
- Browse to the folder containing the 'LG PC Suite IV' on the phone's SD card using Windows Explorer and run the LG Installer file. PC Suite will now install on your system along with the required drivers for your phone.
- Cancel setting up PC Suite or continue setting up PC Suite if you want to Sync or backup the phone data.
- After closing PC Suite, Safely remove the USB device from your system.
- Press the 'Turn off USB Storage' button on phone screen.
- Detach the USB Cable.
- Disable the 'USB Mass Storage Only' mode in the phone's Settings/SDcard &Phone Storage menu.
Alternatively, I also tried installing the latest drivers via LG Mobile Support Tool from LG's website (available HERE) but KDZ-FW-UPD.exe (mentioned below) crashes when run. This could be happening only to me, so please try for yourself before writing off this method.
2. For my comfort more than anything else, I switched off the screensaver and other power saving features on the PC and also set the screen timeout delay on the phone to 30 minutes.(Settings/Display/Screen Timeout)
3. Charge the phone to the maximum.
4. Enable USB Debugging on Phone (Settings/Applications/Development).
5. Detach all other peripherals from your PC. Exit all running applications on your PC especially other PC suites if any. Also exit running programs from the notification bar on the desktop. (Also uninstall Nokia or other phone drivers & microsoft visual ++ runtime environments - not an essential step.)
6. Disable 'LGE Virtual Modem' in PC's Device Manager. (In your Windows operating system, go to Control Panel > System > Hardware > Device Manager > Modems > Right click on LGE Virtual Modem and click Disable.)
7. Unmount the SD card from the phone (Settings/SDcard & Phone Storage).
8. Open phone back and remove the SD Card.
9. Download KDZ_FW_UPD_EN.7z onto your PC and extract it to a folder. Available HERE.Direct Download Link. (MD5 of 7zip file - 813A28BE9182AB604A1D43E745CE7AD7)
10. Run the msxml.msi file and complete the installation.
11. Connect the phone to PC with USB Cable.( If you are using a desktop PC, make sure you use USB ports that are in the back of your PC, avoid the front ports.)
12. Run KDZ_FW_UPD.exe from the extracted folder.
13. Chose TYPE as 3GQCT & Phone Mode as DIAG.
14. In the 'KDZ file' space, browse for the firmware you want to install. (In this case V10B_00.kdz)
15. Press the 'Launch software update' button.
16. The firmware flashing process is now underway.
If all goes well, in 5-10 minutes the phone will be flashed with the new firmware.
I shall describe in detail what happened with my phone - 10-15 seconds after launching software update on PC, my phone screen turned blank and in a couple of seconds the phone entered the 'Emergency Mode'. During this mode the screen was yellow with Emergency Mode written along the middle of the screen. The phone stayed in the same way till the Software update procedure finished on the pc and the phone turned blank. I waited a while for it to reboot but after a minute or so, I manually switched on the phone. The phone came alive and following the LG boot animation, the android logo screen came up. The phone spent about 2 whole minutes in that state before booting up fully and entering the home screen. Update: Wait till phone reboots by itself or wait for a while before manually switching it on.
17. After booting up fully, detach the phone from the pc.
(If the phone gets stuck in the android boot logo screen during first boot, doing a hard reset by pressing and holding the VolDown+Home+Power buttons may resolve the problem.)
Go to 'About Phone' in Settings and confirm the change from 2.2.1 or 2.2.2 to 2.2.
Root the phone using z4root as mentioned before.
If rooting fails with z4root, there is another application called SuperOneClick which can root your phone. Read about it HERE
IN CASE OF PROBLEMS DURING DOWNGRADING FIRMWARE, read the following thread completely. Various types of errors and various measures to correct them including some innovative ones like shaking the phone etc. are mentioned here - [HOWTO] Phone not responding at all - last chance to repair. It is advisable to read this thread completely before attempting to downgrade the firmware using KDZ_FW_UPD.exe to become aware of all the possible problems you might encounter and their possible solutions.
PS: Here is the link to the phone drivers that came with my SD card. One user reported a problem wherein kdz updater would recognise the phone but the update process would fail during kdz unpacking. the problem was resolved by using the drivers i sent him. So, if anyone has the same issue, it might be worthwhile to try out the following drivers. I wouldn't advise everyone to follow this method, but those of you who are feeling lucky might try it out. Download Link
---------------------------------------------------------------------------------------------
2. INSTALLING ANDROID SDK ON YOUR WINDOWS PC
This step is required to install Custom Recovery on your phone using adb from your PC. Using a Custom Recovery, you can make a backup of your current ROM, restore backups, create partitions on your SD card, wipe your phone and the SD card and then also go on to install Custom ROMs using the Flash from Zip option.
Installing a Custom Recovery can also be done in other ways. Using Android SDK from your PC is just one method.
(Custom Recovery can alternatively be installed on your rooted phone using the commands given in the next section using a Terminal Emulator. This method removes the need for installing Android SDK on your PC and connecting your phone to PC. Download Terminal Emulator from Android Market. Install on phone. Run it and give it root permissions when prompted by the 'Superuser' application. As mentioned in the next section, copy the 2 files (flash_image & the custom recovery image file) needed to install Custom Recovery onto the root directory of SD card. Reboot phone. Open terminal emulator and type 'su' without the quotes and press Enter. This will take you to the root shell (#) from the default user shell($). Carefully type in the 7 commands mentioned in the next section one after the other. After typing in the last command (reboot recovery) and pressing enter, WAIT. The phone will reboot. Custom Recovery will have been succesfully installed on your device.
Hint: Copy the installation commands as a text file to phone & copy and paste the commands one by one into terminal emulator using a text editor. Please make the necessary changes to the installation commands depending on the recovery version used)
To install Android SDK on PC, there are a few requirements/downloads which have to be completed first:
JDK (Java Development Kit) - Download Here
JRE (Java Runtime Environment) - Download Here
Android SDK installer - Download here
So after all the downloads are completed, you are good to go. Run PC as Administrator.
First of all install the JDK, then the JRE and then the SDK Installer.
{If when android sdk installer is run, you get an error that JDK or JRE is not detected even after their installation, wait for a while, shut down the computer and restart and run the SDK installer once again.}
Make sure that while installing the android sdk, the installation directory should be the root of a partition i.e. it should be in the following form: C:\android-sdk, where you should replace the letter C with the letter you have assigned to the partition that you want to install it in.
Now that the Android-SDK is installed, go to the installation directory and start the SDK Manager. You need to add the components of the Android SDK to your installation. Before that I would like to inform you that you can save time if you download only what is necessary. If you are on Android 2.1 then you should download the 2.1 sdk, for 2.2 the 2.2 sdk and so on. You do not need to have all the versions for this thing to work. Just your version would do. So to start adding components, I recommend that you read THIS
After installing the desired components, you need to do perform some simple steps in order to use the adb terminal just like the cmd terminal for Windows.
For that purpose, here are the steps to be followed:
Right click My Computer, select Properties, and click Advanced System Settings. (Windows XP users - Right click My computer and just click Properties and select the Advanced Tab)
Click on Environment Variables, in the System Variables box, scroll down to the variable name 'Path' and double click to edit it
It would read something like " %SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static".
Here you need to add a semicolon ( ; ) and add the path of the tools folder in android-sdk.
It should finally be like this " %SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\android-sdk\platform-tools {or the location where adb.exe resides on your system}
Click OK wherever asked and then restart your computer.
Now open a command prompt window and type adb and hit enter. If a terminal window is displayed, you have done it all right.
If it gives some error message, read the article carefully and see what you have messed up with.
---------------------------------------------------------------------------------------------
Tip:
Using adb - How to install apps from PC without having to copy them first to the SD card?
If you want to install apps in one click, all you need to do is download the .apk file of your application to your PC and set the open with option to this batch file which you can download HERE
Save the batch file on the desktop of your PC before setting the option to 'Open With'.
---------------------------------------------------------------------------------------------
3. INSTALLING A CUSTOM RECOVERY
(Procedure of installing Custom Recovery using a terminal emulator from your phone instead of installing android SDK on your PC and connecting your phone to PC is mentioned in the last section.)
UPDATE - 3 May 2011 : Very simple way of installing Custom Thunderg Recovery by AmonRa/modified by Drellisdee version 1.2. Originally posted by ungaze in this post.
1. Download Android Terminal Emulator from Android Market. Install it on your rooted phone.
2. Download the file "amon_ra_recovery_installer.zip" from here or here. Check the MD5 hash value of the downloaded 'zip' file using tools like HashTab etc. before proceeding further. Correct MD5 value : 86db8a52b01f049cadb8f097a4c5bd9e
3. Extract the contents of the 'zip' file to the root of the sd card (ie. not inside any folder) using tools like 7-Zip or WinRAR or any other similar tool.
4. Open the terminal emulator app on your phone and type in the command 'su' without the qoutes. This will prompt a popup on your phone from the SuperUser app asking you whether you want to give root permissions to the terminal emulator app. Click 'Allow' and proceed. You will notice that the shell prompt has changed from the previous user shell '$' to root shell '#' in the emulator app.
5. While in the root shell '#', type in the following command and press Enter. Wait and the phone will reboot into the Custom Recovery.
Code:
sh /sdcard/rf.sh
Once you are up and running with a rooted phone, you will need to download the 2 files needed to install the Custom Recovery. They are:
Download No:1: flash_image - (This file is the same one needed to install any of the 3 versions of Custom Thunderg Recovery by Drellisdee given below)
Download Link (MD5 of zip file - 13FED5DF927214D744A256DAB4C3DC06)
Mirror Link (MD5 of zip file - 13FED5DF927214D744A256DAB4C3DC06)
Mirror Link - requires registration at androidforums.com. (MD5 of zip file - 13FED5DF927214D744A256DAB4C3DC06)
Download No:2: Custom Recovery image file - Choose & download any version among the 3 available after reading what is written below.
Custom Thunderg Recovery by Drellisdee has versions 1.1, 1.2 and 1.2.1 at the time of writing this. I personally prefer version 1.2 as it supports backup & restoration of ext4 Partition on SD Card. Version 1.2.1 is a little experimental in nature & it may not fit all devices as it has a size near 5 MB.
Link to xda-forum thread for Custom Recovery P500/Thunderg - HERE.
The different versions of the Custom Recovery image files are available at the following pages
Custom Recovery P500/Thunderg v1.1
Direct Download link - (MD5 of zip file - eb4ea2ffb26f387a891bb4d7261a0e5f)
Mirror Link - (MD5 of zip file - eb4ea2ffb26f387a891bb4d7261a0e5f)
Custom Recovery P500/Thunderg v1.2
Direct Download link - (MD5 of zip file - 217FC9115899A41195CF124CAF07B880)
Custom Recovery P500/Thunderg v1.2.1
Direct Download link - (MD5 of zip file - 388aac16b1184ab15b5500b2b32d914c)
Please check the MD5 hash values of downloaded files to ensure that files are not corrupted using tools like HashTab etc.
Now to install Custom Recovery, Copy the two files [ the chosen recovery image file (*.img) & the flash_image file (flash_image) ] and paste in the root of your SD card (root means the directory L:\ where L is the letter for your Phone's USB Storage. In short, don't create a folder and paste the files inside it on your SD card).
{Note that the recovery image file should have an .img extension and flash_image file should have no extension when placed on the SD card}
Reboot the phone. Connect phone to PC.
The next step requires Android SDK to be installed on your PC.If you have installed the Android SDK, follow these steps:
Go to Start Menu & Run and type cmd (run as Administrator)
In the cmd window, type adb. If you have installed it correctly, you will see a lot of text on the screen. If you get an error message then you have probably not installed the Android SDK properly.
Type adb shell and hit enter
Type su and hit enter
See your phone at this time and touch the 'Allow' option which SuperUser shows you
Now the terminal window will have a # sign appended to it instead of the previous $ sign. See this screenshot for a better understanding
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now one by one, copy the following lines, in the serial order and paste it into the terminal window and press enter following each line(right click on window and paste, CTRL + V won't work)
mount -o remount,rw -t yaffs2 /dev/block/mtdblock1 /system
cat /sdcard/flash_image > /system/bin/flash_image
chmod 755 /system/bin/flash_image
mv /system/etc/install-recovery.sh /system/etc/install-recovery.sh.bak (if it gives error message here, simply proceed to the next step)
mount -o remount,ro -t yaffs2 /dev/block/mtdblock1 /system
flash_image recovery /sdcard/LGp500-recovery-v12.img (If the recovery version chosen is different from v1.2, type the appropriate file name of the recovery image here instead.)
reboot recovery
Click to expand...
Click to collapse
Wait. The phone will reboot now.
Note:{If you get this error after step 4
mv /system/etc/install-recovery.sh /system/etc/install-recovery.sh.bak
failed on '/system/etc/install-recovery.sh' - No such file or directory
Simply move on to the next step.
If you get any errors other that those mentioned here, please do not proceed with the last command of 'reboot recovery'. If you do so, recovery may not be correctly installed and you will lose all data on the phone as the phone will be reset to factory defaults. Please go back to the instructions and see what you have done wrong.
NOTE: If on booting into the recovery you get the following message at the bottom of the screen -
E: 'Bad Boot Message'
Don't panic, it's perfectly normal and you can proceed with what you want to do from the recovery.}
Detach the phone from the PC.
To access the Custom Recovery, turn off the phone and then press & hold Home+Vol Down+Power buttons to boot into the Custom Recovery.
---------------------------------------------------------------------------------------------
Once you have booted into the recovery, the touch screen won't work. The actions assigned to the different buttons are given here. Use them to navigate through the different options in Custom Recovery.
Up & down: vol-up and vol-down key
Select: Menu key (left most)
Back: Back (3rd from left)
---------------------------------------------------------------------------------------------
What does Custom Recovery look like & What does it do?
Note: In Custom Recovery versions 1.2 and above, zips can be extracted from inside folders. So, save the zips in a folder named AAA and flash the zip after browsing inside the folder through recovery. The folder name should be named 'AAA' so that it appears among the first on the recovery screen, since scrolling is not an option in recovery.
Note: There is also an unofficial port of ClockworkMod Recovery availble. I do not recommend this recovery for newbies as it isn't compatible with all Custom ROM's out there.
---------------------------------------------------------------------------------------------
4. INSTALLING CUSTOM ROMs
BEFORE FLASHING ANY ROM, DO A NANDROID BACKUP FROM CUSTOM RECOVERY
Since all the ROMs have their own kinds of partitions to be created and other requirements, you can check them at the ROM specific pages.
General procedure to follow for installing a Custom ROM
Boot into Custom Recovery
Wipe your cache, dalvik cache, SD card
Make partitions according to the ROM requirement
Wipe cache again.
Connect Phone to PC
Toggle USB MS and paste the ROM zip file to a folder called AAA in the root of the SD card
Disable USB MS.
Detach phone from PC.
Select 'Flash from zip' option in Custom Recovery menu
Select the ROM file
Flash the ROM file
After flashing is finished, Reboot the phone.
Note: It will take some time to flash and reboot into your new Custom ROM. The phone may stay with the boot logo displayed for a number of minutes. Do not switch off phone during this period.
---------------------------------------------------------------------------------------------
In case of problems with phone, read: [HOWTO] Phone not responding at all - last chance to repair
Also read: [READ FIRST] [REF] Repository of howto's, roms, kernel, etc.
If you feel benefited by this thread, I humbly request you to rate this thread and vote it to the front page. The option to rate and vote is present in the title bar of the thread on the right side.
Please post your feedback. Also THANKS is always welcome. Use the THANKS button (below right) if you feel that I deserve it.
Update - 24 April 2011 - New rooting method without needing to downgrade firmware.
Update - 3 May 2011 - Very simple way of installing Custom Thunderg Recovery
Update - 3 May 2011 - Added Simplified Guide to Root & install Custom Recovery on P500
i have done all steps but cannot boot in custom recovery may be pressing the keys wrong please help
Thank you very much for posting this! I think it's only missing a section for downgrading, and changing from one custom rom to another, and it's perfect!
I guess my memory card died.. The USB-MS Toggle doesn't launch anything on my PC, tried several times.Now what?
FnH84 said:
I guess my memory card died.. The USB-MS Toggle doesn't launch anything on my PC, tried several times.Now what?
Click to expand...
Click to collapse
Have you installed the drivers for the phone on your computer? If you haven't, your phone will not be detected when toggling usb mass storage.
saileshchowatia said:
i have done all steps but cannot boot in custom recovery may be pressing the keys wrong please help
Click to expand...
Click to collapse
Did you read the thread I have linked to at the end of the article? it may help you.
FnH84 said:
Thank you very much for posting this! I think it's only missing a section for downgrading, and changing from one custom rom to another, and it's perfect!
Click to expand...
Click to collapse
The procedure for downgrading the firmware is included in the article. The procedure is the same for installing any version of original firmware on the phone.
Procedure to change from one custom rom to another various with each rom.some may need a wipe while others might need repartitioning your sd card.
victortangocharlie said:
Have you installed the drivers for the phone on your computer?
Click to expand...
Click to collapse
Yes. It worked fine before. I tried to flash with CM7, and something went wrong. The whole SD-card is empty, works on another phone though. However, Windows will not recognize it no matter what I do
Do you mean to say that your sd card is empty our that you can't see the sd card contents on your computer?
victortangocharlie said:
Do you mean to say that your sd card is empty our that you can't see the sd card contents on your computer?
Click to expand...
Click to collapse
Both. I put the memory card on another phone and it said it was empty. Also, custom recovery says it's empty and from mount menu, I can see it keeps unmounting.
Have you tried another card on your phone?
victortangocharlie said:
Have you tried another card on your phone?
Click to expand...
Click to collapse
I managed to get the card work via another card reader. I put the zip files on it and trying again now. Hope it will work.
EDIT: It works!!!
nvm.....................
Glad to hear it.
Sorry for noob question, but after downgrade to 2.2, root, can I flash any rooted 2.2.1 ? And is there any?
Once you have rooted your phone, you can install any custom rom meant for p500. This includes all android versions. And, you don't have to apologise for being a noob, this thread is meant for noobs primarily. everyone has to start someplace. There are many rom's accessible on this forum including android versions 2.2 to 2.3.3. I suggest you try Nessy#Euridice ROM by Dookmatt. I am using it and it is easy to set up.it is based on android 2.2.2
Thanks,
So if there isn't any method for root on 2.2.1, how they managed to give us pre rooted 2.2.1 roms?
I seek the fastest and stable rom with OC, but Im used to CM7 tweaks,.so im interested in it the most. So is it usable? Beside cm7 which is the fastest?
Guess, you will have to ask the people who make the rom's. I don't know about the cm7 rom.haven't used it myself.
IFLPI said:
Thanks,
So if there isn't any method for root on 2.2.1, how they managed to give us pre rooted 2.2.1 roms?
I seek the fastest and stable rom with OC, but Im used to CM7 tweaks,.so im interested in it the most. So is it usable? Beside cm7 which is the fastest?
Click to expand...
Click to collapse
rooting a stock Rom is hard where as as rooting a custom made rom is easy because u only need the framework to create ur custom rom....
and about CM7 u can choose between many flavours.... its upto u ..
hi
hey man thanks for the wonderful tutorial!!
i just broght my phone 2weeks back. got it after lots of requests to dad!!
i wanna try all the stuff but im damn scared if i would brick my phone..
although i have the exact same phone as yours..unbranded indian optimus one with v10c
should i try it or is there a risk that ill brick it..?
if i brick it.. is there a chance that i can get it repaired? or will the lg ppl refuse to support me because i screwedwith it??
thanks in advance!!
i was following this noob guide to s-off and root my incredible s. (http://forum.xda-developers.com/showthread.php?t=1705913)
((Section 1
1. Make a new folder on desktop called 'Downgrade'
2. Download this: http://forum.xda-developers.com/atta...5&d=1339391278
3. Make a new folder in 'Downgrade' called 'Downgrade Kit'
4. Extract the download into 'Downgrade Kit'
5. Now you should have a folder called 'Downgrade' on your desktop, inside that should be another folder called 'Downgrade Kit', inside that there should be a folder called 'files' and a program called 'runme.cmd'.
6. Make a new folder inside 'Downgrade' called 'RUU'
7. Download this and save it to folder 'RUU': http://www.filefactory.com/file/c0af...308_signed.exe
8. Connect phone to computer, and choose ‘Charge Only’ not ‘Disk Drive’. Enable USB Debugging, and disable Fastboot (If you don’t know how to, ask Dr. Google)
9. Open runme.cmd, it will ask questions! Answer according to your phone not mine! The questions are (If I can remember) i) Do you have root? I answered n. ii) Have you unlocked through htcdev.com? I answered no. iii) Do you want to create a goldcard? I answered y
10. After it successfully completes (if it doesn’t post below) run the RUU in the RUU folder (Remember it erases all data so if you need to, backup everything) , it will take around 10 mins. BE PATIENT!
11. After it installs check if your HBOOT has been downgraded! It should be 1.13.0000!
-----------------------------------------------------------------------------
Section 2
1. Go to (revolutionary.io) and scroll down to hit ‘Downloads for Windows’ (But keep the website open)
2. Download and extract the .zip to a folder
3.Fill in the boxes for the beta key (on the revolutionary website)
You should fill it out like this
Your Operating System: Windows/Linux (Depending on yours)
Your Device: HTC Incredible S
HBOOT Version: 1.13.0000
Serial Number: (Your serial number)
4. Copy and paste that beta key into a notepad file and save it to the desktop! Beware copy and recheck if it matches
5. Connect phone, choose ‘Charge Only’, enable USB Debugging and disable Fastboot
6. Run revolutionary.exe
7. When it asks you to input beta key, do it!
8. When it asks you whether you want to flash Clockwork Mod Recovery, type y
9. Once it is done, the cmd will close
10. Confirm that you have S – Off in the bootloader!
11. So far so good!
12. Reboot into bootloader if you are not and then open up recovery, it should go to Clockwork Mod Recovery
13. While phone is in Clockwork Mod, connect phone to computer
14. Select Mounts and Storage by using the volume buttons to move and power to select.
15. Then select mount sdcard (the sd card directory should pop up on your computer screen)
16. Download the root .zip file and save it to your computer (do NOT extract it) (http://d-h.st/yzV)
17. Copy the root .zip file to the root of your sdcard and wait for it to transfer (not in any folders, just on the sd card itself).
18. On your device, select unmount sdcard.
19. On your device, select go back.
20. Then select Install zip from sdcard and choose the root .zip file.
21. Wait for it to flash, once done, select reboot system now.
22. Once your device reboots, open the app drawer and you should see Superuser permissions there. If so, you are all set, you are rooted, have S-Off and a custom recovery image.))
However until Section 2 step 15, i am stuck now. i mount my sdcard follwing the instructions, but the sd card directory doesnt pop up on my computer screen. What could be the problem??
Is there mount usb storage?
Click thanks
Sent from my HTC Incredible S using xda premium
FallenSuisydal said:
Is there mount usb storage?
Click thanks
Sent from my HTC Incredible S using xda premium
Click to expand...
Click to collapse
solved it. i copy the file manually into the sdcard without using the recovery mod. Thx for ur rply. and sorry for my noob question.
apache0909 said:
i was following this noob guide to s-off and root my incredible s. (http://forum.xda-developers.com/showthread.php?t=1705913)
((Section 1
1. Make a new folder on desktop called 'Downgrade'
2. Download this: http://forum.xda-developers.com/atta...5&d=1339391278
3. Make a new folder in 'Downgrade' called 'Downgrade Kit'
4. Extract the download into 'Downgrade Kit'
5. Now you should have a folder called 'Downgrade' on your desktop, inside that should be another folder called 'Downgrade Kit', inside that there should be a folder called 'files' and a program called 'runme.cmd'.
6. Make a new folder inside 'Downgrade' called 'RUU'
7. Download this and save it to folder 'RUU': http://www.filefactory.com/file/c0af...308_signed.exe
8. Connect phone to computer, and choose ‘Charge Only’ not ‘Disk Drive’. Enable USB Debugging, and disable Fastboot (If you don’t know how to, ask Dr. Google)
9. Open runme.cmd, it will ask questions! Answer according to your phone not mine! The questions are (If I can remember) i) Do you have root? I answered n. ii) Have you unlocked through htcdev.com? I answered no. iii) Do you want to create a goldcard? I answered y
10. After it successfully completes (if it doesn’t post below) run the RUU in the RUU folder (Remember it erases all data so if you need to, backup everything) , it will take around 10 mins. BE PATIENT!
11. After it installs check if your HBOOT has been downgraded! It should be 1.13.0000!
-----------------------------------------------------------------------------
Section 2
1. Go to (revolutionary.io) and scroll down to hit ‘Downloads for Windows’ (But keep the website open)
2. Download and extract the .zip to a folder
3.Fill in the boxes for the beta key (on the revolutionary website)
You should fill it out like this
Your Operating System: Windows/Linux (Depending on yours)
Your Device: HTC Incredible S
HBOOT Version: 1.13.0000
Serial Number: (Your serial number)
4. Copy and paste that beta key into a notepad file and save it to the desktop! Beware copy and recheck if it matches
5. Connect phone, choose ‘Charge Only’, enable USB Debugging and disable Fastboot
6. Run revolutionary.exe
7. When it asks you to input beta key, do it!
8. When it asks you whether you want to flash Clockwork Mod Recovery, type y
9. Once it is done, the cmd will close
10. Confirm that you have S – Off in the bootloader!
11. So far so good!
12. Reboot into bootloader if you are not and then open up recovery, it should go to Clockwork Mod Recovery
13. While phone is in Clockwork Mod, connect phone to computer
14. Select Mounts and Storage by using the volume buttons to move and power to select.
15. Then select mount sdcard (the sd card directory should pop up on your computer screen)
16. Download the root .zip file and save it to your computer (do NOT extract it) (http://d-h.st/yzV)
17. Copy the root .zip file to the root of your sdcard and wait for it to transfer (not in any folders, just on the sd card itself).
18. On your device, select unmount sdcard.
19. On your device, select go back.
20. Then select Install zip from sdcard and choose the root .zip file.
21. Wait for it to flash, once done, select reboot system now.
22. Once your device reboots, open the app drawer and you should see Superuser permissions there. If so, you are all set, you are rooted, have S-Off and a custom recovery image.))
However until Section 2 step 15, i am stuck now. i mount my sdcard follwing the instructions, but the sd card directory doesnt pop up on my computer screen. What could be the problem??
Click to expand...
Click to collapse
I tried to follow this guide 2-3 times but whenever i run runme.cmd it asks me if i my phone is rooted. I say y and then it gets stuck at "Downgrading". If i disconnect USB, it asks about the gold card but it doesn't get downgraded.
I noticed that in the most recent version of Hasoon2000's kit, when I tried to use the "APK Installer" function, a file was missing, and thus I was unable to install SuperSU Binary. If there is a fix or a work-around, it would be incredible useful if someone could tell me about it. (I am new to this place, and I can't post on the dev's thread or else I would)
I also can't post images it seems.. uggh.
I would recommend just flashing the SU package manually. If you already did the step of flashing a custom recovery, the next step is really simple.
Here's all you have to do:
1) Go into the folder of Hasoon's tool, then into Data, then into SU
2) Copy the SuperSU.zip to your SD card
3) Reboot your phone into recovery (hold pwr button and vol down as the phone powers up)
4) Choose Recovery
5) In which ever recovery you have, find the install option, browse for the SuperSU.zip
6) Flash!
7) Reboot and enjoy root
Hope that helps!
Edit: Ha! I just looked at the script for installing root from Hasoon's tool. Literally all it does is copy that SuperSU.zip to your SD card, then displays the same instructions I have above but in less detail.
Hers the links for the Files
HTC One Mini 2 original Backup
TWRP 2.7.1.1 and TWRP 2.8.1 thanks to @u-ra
Recovery 2.16 thanks to @djluisbento
SuperUser 2.02
This are the files i use on mine HtC with no problems
Install any Custom Recovery with Fastboot:
For this method to work, you must have ADB and fastboot installed on your computer.
Copy the recovery image to a convenient location on your computer, preferably with a short path. We will be placing it on the C Drive directly (not in any folder) and using that in the next steps.
Note: The recovery image should have .img extension. If it is in a zip file, extract the .img file from it before proceeding.
While your device is powered on and booted in Android normally, connect it to your computer via USB and
Connect your device to your computer via USB and wait till you see ‘fastboot USB’ on the screen.
Launch Command Prompt and type the following command:
fastboot flash recovery c:\recovery.img
Note that we have used c:\recovery.img as we the image extracted at the root of our C drive and renamed it to recovery.img. If you extracted the file elsewhere, use the appropriate path and if your recovery image has a different name, use the appropriate name or rename it to recovery.img first.
Wait for the process to finish and reboot your device once it’s done.
Using the recovery file
Download backup file from link above
Send to phone via sd card or TWRP adb push (google it) and (do not unzip or change file name)
Use TWRP to install from backup.
Super User
Download backup file from link above
Send to phone via sd card or TWRP adb push (google it) and (do not unzip or change file name)
Use TWRP to install zip file.
I have discovered multiple ways of downgrading ZenFone 2 Laser out of which two methods proved out to be easy and reliable. Both methods have been tested and are working.
Method 2 doesn't require root while method 1 needs root access.
Pre-requisite: Stock firmware zip file. You can find download links from index thread for all variants.
WHILE THIS GUIDE HAS VERY LESS CHANCES OF MESSING UP YOUR DEVICE, HUMAN ERROR CAN ANYWAY HARM THE DEVICE. I AM NOT RESPONSIBLE FOR ANYTHING YOU DO TO ANY DEVICE. YOU ARE DOING THIS AT YOUR OWN RISK
METHOD 1: Requires ROOT-
Short instruction:
Some users say you can downgrade by renaming the OTA zip to correspond to a higher version but that will NEVER work because the update script has this line
(!less_than_int(1457089250, getprop("ro.build.date.utc"))) || abort("Can't install this package (Fri Mar 4 19:00:50 CST 2016) over newer build (" + getprop("ro.build.date") + ").");
Click to expand...
Click to collapse
The recovery reads ro.buid.date.utc value from buid.prop. If the value is less than the value in updater-script (like the value highligted in above quote) any recovery will not flash it, neither stock nor custom. Just increaase the value of ro.build.date.utc (in build.prop) to any value higher than the value in updater-script and then flash the zip via recovery.
Detailed Instructions:
1. Open updater-script from the firmware zip. It will be found in /META-INF/com/google/android inside the .zip
2. look at the first line (!less_than_int(1457089250, getprop("ro.bui....
3. The value 1457089250 is taken as an example, your updater-script may have a different value. Keep a note of this value.
4. Install any root file manager like ES file explorer (if you dont have already)
5. Goto /system (the system folder) using the root file manager. Grant root access if prompted
6. Open buid.prop file as text and look for the line "ro.build.date.utc=1446585430"
1446585430 is taken as example, your phone will have a different value.
7. Now increase this value in build.prop to any number greater than the value you noted from updater-script
for example, if my updater-script has 1457089250 this value and buil.prop has 1446585430 this value, I will simply change the value in build.prop to 1546585430 or 1448585430 or 1457089251. Any number greater than 1457089250 will work in my case.
8. Now reboot to recovery (vol down + power)
9. Select "apply update from external sd card" select your firmware zip file, and then select yes to flash. It will take 5-10 min
10. (optional but recommended) Wipe factory/data . If you don't do this, you will see the annoying "Android is upgrading.." screen which takes around 30-40 mins to reach home screen.
Method 2: Without root, requires computer
Short instructions:
As I mentioned earlier, recovery reads "ro.build.date.utc" But you can bypass this check by erasing system partition.
Just do
Code:
fastboot erase system
from fastboot mode and then flash the zip from recovery
Detailed Instructions:
1. Install Asus drivers to your computer. (link in index thread)
2. Download adb_fastboot.zip and extract its contents
3. Reboot your phone to 'bootloader mode'. To do this turn of your phone completely. Hold "volume down Up" button and then press and hold power button. Release power button after Asus logo appears and then release volume down button. Your phone is now in bootloader mode.
4. Connect your phone to pc via a reliable usb cable. Look at your phone screen. It should display "Fastboot mode!"
5. Now go to the folder where you have extracted all the files. Holding down shift key, Right click on any point on white screen. Then click on 'open command window here' from the menu that appears. Command Prompt will open now
6. On command prompt type
Code:
fastboot devices
and hit enter
and check if it is detecting your device.
7. Then type
Code:
fastboot erase system
(this will erase your current OS, you are warned!)
8. After it is done type
Code:
fastboot oem reboot-recovery
to boot into recovery mode
9. Select "apply update from external sd card" select your firmware zip file, and then select yes to flash. It will take 5-10 min
10. (optional but recommended) Wipe factory/data . If you don't do this, you will see the annoying "Android is upgrading.." screen which takes around 30-40 mins to reach home screen.
Successfully downgraded to 1.16.40.763 from 1.17.40.1234 without root
Thanks!
sziraqui said:
I have discovered multiple ways of downgrading ZenFone 2 Laser out of which two methods proved out to be easy and reliable. Both methods have been tested and are working.
Method 2 doesn't require root while method 1 needs root access.
Pre-requisite: Stock firmware zip file. You can find download links from index thread for all variants.
WHILE THIS GUIDE HAS VERY LESS CHANCES OF MESSING UP YOUR DEVICE, HUMAN ERROR CAN ANYWAY HARM THE DEVICE. I AM NOT RESPONSIBLE FOR ANYTHING YOU DO TO ANY DEVICE. YOU ARE DOING THIS AT YOUR OWN RISK
METHOD 1: Requires ROOT-
Short instruction:
Some users say you can downgrade by renaming the OTA zip to correspond to a higher version but that will NEVER work because the update script has this line
The recovery reads ro.buid.date.utc value from buid.prop. If the value is less than the value in updater-script (like the value highligted in above quote) any recovery will not flash it, neither stock nor custom. Just increaase the value of ro.build.date.utc (in build.prop) to any value higher than the value in updater-script and then flash the zip via recovery.
Detailed Instructions:
1. Open updater-script from the firmware zip. It will be found in /META-INF/com/google/android inside the .zip
2. look at the first line (!less_than_int(1457089250, getprop("ro.bui....
3. The value 1457089250 is taken as an example, your updater-script may have a different value. Keep a note of this value.
4. Install any root file manager like ES file explorer (if you dont have already)
5. Goto /system (the system folder) using the root file manager. Grant root access if prompted
6. Open buid.prop file as text and look for the line "ro.build.date.utc=1446585430"
1446585430 is taken as example, your phone will have a different value.
7. Now increase this value in build.prop to any number greater than the value you noted from updater-script
for example, if my updater-script has 1457089250 this value and buil.prop has 1446585430 this value, I will simply change the value in build.prop to 1546585430 or 1448585430 or 1457089251. Any number greater than 1457089250 will work in my case.
8. Now reboot to recovery (vol down + power)
9. Select "apply update from external sd card" select your firmware zip file, and then select yes to flash. It will take 5-10 min
10. (optional but recommended) Wipe factory/data . If you don't do this, you will see the annoying "Android is upgrading.." screen which takes around 30-40 mins to reach home screen.
Method 2: Without root, requires computer
Short instructions:
As I mentioned earlier, recovery reads "ro.build.date.utc" But you can bypass this check by erasing system partition.
Just do
Code:
fastboot erase system
from fastboot mode and then flash the zip from recovery
Detailed Instructions:
1. Install Asus drivers to your computer. (link in index thread)
2. Download adb_fastboot.zip and extract its contents
3. Reboot your phone to 'bootloader mode'. To do this turn of your phone completely. Hold volume down button and then press and hold power button. Release power button after Asus logo appears and then release volume down button. Your phone is now in bootloader mode.
4. Connect your phone to pc via a reliable usb cable. Look at your phone screen. It should display "Fastboot mode!"
5. Now go to the folder where you have extracted all the files. Holding down shift key, Right click on any point on white screen. Then click on 'open command window here' from the menu that appears. Command Prompt will open now
6. On command prompt type
Code:
fastboot devices
and hit enter
and check if it is detecting your device.
7. Then type
Code:
fastboot erase system
(this will erase your current OS, you are warned!)
8. After it is done type
Code:
fastboot oem reboot-recovery
to boot into recovery mode
9. Select "apply update from external sd card" select your firmware zip file, and then select yes to flash. It will take 5-10 min
10. (optional but recommended) Wipe factory/data . If you don't do this, you will see the annoying "Android is upgrading.." screen which takes around 30-40 mins to reach home screen.
Click to expand...
Click to collapse
Currently iam on marshmallow. My phone is zenfone laser 550kl. Iam having some problems with the marshmallow recovery because of that when doing apply update from sd card it is resulting an error.
Failed to mount/asdf.
So i like to flash the lolipop recovery while iam on the marshmallow and then do apply update from sd card. I like to go back to the 1.13 lolipop firmware
Is it possible to to flash the lolipop recovery while iam on marshmallow. If possible. Help me how to do that
ThanveerAliSayed said:
Currently iam on marshmallow. My phone is zenfone laser 550kl. Iam having some problems with the marshmallow recovery because of that when doing apply update from sd card it is resulting an error.
Failed to mount/asdf.
So i like to flash the lolipop recovery while iam on the marshmallow and then do apply update from sd card. I like to go back to the 1.13 lolipop firmware
Is it possible to to flash the lolipop recovery while iam on marshmallow. If possible. Help me how to do that
Click to expand...
Click to collapse
"Failed to mount /asdf" error is harmless you will get that error even on latest twrp. You can ignore the error and use the MM stock recovery like normal. Recovery will do its job it can format, install updates, clear cache and everything, you just need to ignore that /asdf error
But you can use any stock recovery from any firmware version lower than or equal to your current firmware version. Drawbacks: You cannot apply update to MM OTAs if your recovery version doesn't match the current firmware version.
Going back to stock 1.13 is a bad idea. I would recommend you to stay on MM since it has many performance improvements.
But still if you want to go back to lollipop, consider downgrading to the last lollipop update i.e. v1.17.40.1531
Xda Tips: 1. Never quote the entire OP (the main post here, called original post)
2. Don't say thanks, instead hit the :good: button
3. Use "Post Reply" option on top if you want to reply to a post. Use @username to gain attention of a user
sziraqui said:
"Failed to mount /asdf" error is harmless you will get that error even on latest twrp. You can ignore the error and use the MM stock recovery like normal. Recovery will do its job it can format, install updates, clear cache and everything, you just need to ignore that /asdf error
But you can use any stock recovery from any firmware version lower than or equal to your current firmware version. Drawbacks: You cannot apply update to MM OTAs if your recovery version doesn't match the current firmware version.
Going back to stock 1.13 is a bad idea. I would recommend you to stay on MM since it has many performance improvements.
But still if you want to go back to lollipop, consider downgrading to the last lollipop update i.e. v1.17.40.1531
Xda Tips: 1. Never quote the entire OP (the main post here, called original post)
2. Don't say thanks, instead hit the :good: button
3. Use "Post Reply" option on top if you want to reply to a post. Use @username to gain attention of a user
Click to expand...
Click to collapse
I got a 412 mb ota update some days before. I downloaded it. Apply it for proceed. Then it start checking system as usual phone restarted. But update did not happened. Instead this same error show up. Then i can only reboot system. Got an update failed message.since that when i check for updates iam not even getting any. May be it will be solved by a factory reset .but even if i get an ota. The update wont proceed .because the recovery wont allow me to do that
And also that wipe cache partition also results the same error .so without solving this error i cant update to the latest MM too :/ .
In my experience, the most reliable method is to
extract the recovery from the version of stock ROM you want to upgrade or downgrade to
Flash that recovery with fastboot
Wipe /system in fastboot
Reboot to recovery and update with the stock ROM .zip
Or
Even easier, use Sziraqui's fastboot ready .IMG files and just flash them via fastboot.:good:
where can i find the recovery file in Stock rom
4llerbuntu said:
In my experience, the most reliable method is to
extract the recovery from the version of stock ROM you want to upgrade or downgrade to
Thanks for the Information, Can you please help to find the recovery file in Stock rom.
Click to expand...
Click to collapse
The recovery is included in the stock ROM zip file. Extract the zip and you will find it inside.
Presumably if you want to flash the stock ROM you have already downloaded it?
4llerbuntu said:
The recovery is included in the stock ROM zip file. Extract the zip and you will find it inside.
Presumably if you want to flash the stock ROM you have already downloaded it?
Click to expand...
Click to collapse
Hi, I see only boot.img in the zip file. Is there a hidden recovery?
4llerbuntu said:
The recovery is included in the stock ROM zip file. Extract the zip and you will find it inside.
Presumably if you want to flash the stock ROM you have already downloaded it?
Click to expand...
Click to collapse
I see only boot.img file , i didn't find any recovery.img file, in case if you have already done this probably yes then please share us the steps to get recovery from Stock rom.
4llerbuntu said:
In my experience, the most reliable method is to
extract the recovery from the version of stock ROM you want to upgrade or downgrade to
Flash that recovery with fastboot
Wipe /system in fastboot
Reboot to recovery and update with the stock ROM .zip
Or
Even easier, use Sziraqui's fastboot ready .IMG files and just flash them via fastboot.:good:
Click to expand...
Click to collapse
I cant find any recovery.img in the firmware zip. :/
Can you detaily explain that fastboot method as it is for flashing the lolipop recovery for downgrading to 1.13.
Iam a beginner in android. This is my first android phone.
murat124 said:
Hi, I see only boot.img in the zip file. Is there a hidden recovery?
Click to expand...
Click to collapse
I found out that recovery for each firmware is available here. You should use a desktop browser to use this website.
https://mega.nz/#F!lodnzDhK!H5ChxausDTyko1qGlnF7dw!Fg9FwLoa
ThanveerAliSayed said:
I found out that recovery for each firmware is available here. You should use a desktop browser to use this website.
https://mega.nz/#F!lodnzDhK!H5ChxausDTyko1qGlnF7dw!Fg9FwLoa
Click to expand...
Click to collapse
Thank you.
Can ZE551KL use the recovery.img from ZE550KL? My ZE551KL has the extra 1700(AWS) band.
Please where are you guys downloading your stock rom from?
The stock zip is NOT flash-able like a custom ROM .zip. That's not how it works. If the Roms you have are custom recovery flash-able, they are not the OEM rom, they have been modified.
All the Roms I have come with a recovery.img file...
Then again if I have to explain how to use fast boot to flash the recovery, there is a good chance you shouldn't be messing around with fast boot.......
---------- Post added at 10:03 PM ---------- Previous post was at 10:02 PM ----------
murat124 said:
thank you.
Can ze551kl use the recovery.img from ze550kl? My ze551kl has the extra 1700(aws) band.
Click to expand...
Click to collapse
no it cannot. Do not try it
Weird ..... I can find recovery.img
Can anyone explain me detail. How to flash recovery only. My bootloader is not unlocked. Someone said that i need to unlock bootloader to flash the stock recovery
ThanveerAliSayed said:
Can anyone explain me detail. How to flash recovery only. My bootloader is not unlocked. Someone said that i need to unlock bootloader to flash the stock recovery
Click to expand...
Click to collapse
You don't need to unlock bootloader for flashing stock recovery that you downloaded from the above mega drive.
To flash the recovery.img (or any .img) You need to have Adb and fastboot files in your pc as well as Asus Zenfone drivers installed
All info and downloads for adb and fastboot can be found here
Search and download Asus ZenFone 2 laser drivers.
Once you have your pc setup with these tools,
With Administrator priveleges, locate the folder where adb.exe and fastboot.exe files are present. Hold down shift key and right click on that folder and select "open command window here". Then reboot your phone to fastboot mode [power off, hold vol up +power, release power when logo appears]
Connect your device to pc.
Type the following command on cmd
Code:
fastboot devices
Output should be something like this
Code:
FCAHSJSJJAKAK fastboot
This command will check if your device is connected or not
If output is blank, device is not being detected.
To flash recovery.img, copy the recovery.img file to the same folder where fastboot.exe exists and then type
Code:
fastboot flash recovery recovery.img
Output is easy to understand, if it says [OKAY] then flashing succeeded
Tried downgrading ze551kl by fastboot erase system then installing .zip from Asus website (via sdcard). All of the Asus updates except the earliest fail with 'fota return code 403'.
1.14.40.550 installs ok but then boots (gets as far as displaying the wallpaper), gives an error message in german (looks like 'android media process stopped') and goes into boot loop. Anyone seen this before?
Also, any way to build a recovery.img from the Asus update files?
invalid boot image whenever i flashed stock recovery,any one know why ?
What i do is flash the stock recovery and flash relock bootloader.
Leftrand said:
invalid boot image whenever i flashed stock recovery,any one know why ?
What i do is flash the stock recovery and flash relock bootloader.
Click to expand...
Click to collapse
I think OP needs a small correction to enter into FASTBOOT you need to press volume up and power instead of volume down and power buttons
---------- Post added at 05:45 PM ---------- Previous post was at 05:38 PM ----------