[Q] HTC one M7 Screen dead - One (M7) Q&A, Help & Troubleshooting

​Hi there can anyone help me please on this matter.
My wife has a HTC One M7. last week the phone fell in to the bath. I managed to open the phone up and clean it.
The phone was taken apart and cleaned correctly using the correct circuit board cleaning solution (sorry cant remember the name).
I then ordered a new battery as the old one was not holding full charge. I also ordered a new screen + digitizer as the old one was cracked.
I have put everything together and charged the phone.
The phone charges correcrtly and has no problems at all.
When i switch on the phone it starts as normal and makes normal sounds etc BUT the screen is dead.
There is NO life in the screen at all even though its a new screen etc.
I know that the old screen is working and even using that i still get nothing.
Has anyone else come across this issue ?
Are there any guides to test the screen driver IC etc ....???
Thanks for your help in advance

It seems like that you have got a faulty screen.

amebb said:
​Hi there can anyone help me please on this matter.
My wife has a HTC One M7. last week the phone fell in to the bath. I managed to open the phone up and clean it.
The phone was taken apart and cleaned correctly using the correct circuit board cleaning solution (sorry cant remember the name).
I then ordered a new battery as the old one was not holding full charge. I also ordered a new screen + digitizer as the old one was cracked.
I have put everything together and charged the phone.
The phone charges correcrtly and has no problems at all.
When i switch on the phone it starts as normal and makes normal sounds etc BUT the screen is dead.
There is NO life in the screen at all even though its a new screen etc.
I know that the old screen is working and even using that i still get nothing.
Has anyone else come across this issue ?
Are there any guides to test the screen driver IC etc ....???
Thanks for your help in advance
Click to expand...
Click to collapse
MIght be a faulty screen as said above, maybe a broken or badly connected flex cable. And since the phone went into the bath, maybe a defective motherboard. Its very hard to tell.

as @alray said, it's hard to judge what's the cause of the dead screen, it may be one of the three causes.
so first, you can connect your old screen to the motherboard, if it can still work, to check whether the mother board was damaged or not
if the old screen can be lighten up, you can exclude the possibility of damaged motherboard.
second , you can connect your new screen to the motherboard again. Just be carefully and pay attention to the connector. Make sure it is connected correctly. If the screen can't be lighted up, you need try to use achohol or something else in a small brush to clean the connector. Handle gently to avoid damaging the IC. After that check whether the IC has lost some part or not. Then, if the flex cable or connector is fine, you can connect the new screen to the motherboard again.
finally, if the new screen still keep the same same situation. you can almost judge that you ordered a defective part.
May the steps above helps!

Hi there
the screen works fine as well as the connectors.
These have been tested on another htc one phone.
I have noticed that the motherboard connecter is damaged..... i will try to get some pics up later today.
Thanks

Related

Screen Problems - Possible ribbon cable loose?

Ok guys, need some help here....
Got a HTC TyTN II.... Worked great for like 8-10 months, then started having issues with the screen.
Sometimes when brining it out of sleep, the colors are all jagged, and the screen is out of sync and staticky (kind of when you have a VGA monitor and you half pull the cable out of the connector)...
So I'm assuming its a problem with the ribbon cable coming loose (if thats how its connected).
Another thing too, the memory card slot doesn't work anymore. This just re-inserts the fact the ribbon cable or whatever for the front of the device is loose.
Does ANYONE know how to fix this? Unfortunately I tried to rip the phone appart myself and voided the warranty...
Anyone else have these problems?
Sometimes the screen works, sometimes I have to put it back to sleep, wait 5 minutes, and wiggle the front. hit the power button and it works. This has happened across 3 firmware updates so it's hardware for sure....
It does sound like a piece of hardware is loose. The fact that your mem card is not working further suggests this. I took apart my Tilt yesterday to replace the screen which no longer responded to touch, although it still worked with hardkeys. As part of the process I noticed the mem card slot was integral to the screen components. In other words, the screen and attached component, including the mem card slot is loose. For video as to how to pull apart your phone, go here. I have never done this before and this video worked beautifully. Also, search the forums for the HTC Service Manual and go through this page by page, step by step matching it against this video (if yo have dual screens even better) and you will come out fine. I did!
http://www.fonlogix.us/Video-Instructions_ep_34.html
You can buy replacement screens and the tools from the same website. Otherwise try eBay, which is what I did. Definitely get yourself a strong pry tool. The one I bought from eBay disintegrated in the first couple of minutes. Luckily there was just enough of tip of the pry tool for me to use brute force to pry open the case without damaging the phone.
thnx bud, ill be posting my results.

[Q] Captivate with smashed screen worth fixing?

]I bought a broken captivate through a friend of a friend for its accessories (for its battery, micro usb cable, and the back in case I ever damage or scratch mine).
I guess this guy bricked his cappy, got mad and threw it at the wall which completely smashed the screen. I realized a while ago that when I put a battery in it and plug it into the wall, that it will actually charge the battery so have been using it as a charger. Recently though I noticed that the soft keys light up. So tonight I got the bright idea for fun, that I'd put a jig in it and connect it to ODIN. Low and behold, it detected the device and I flashed it to stock. When it rebooted, the start up sound came on.
So my question to you guys is this... if the phone can be flashed and boots up okay, is it worth trying to see if someone (a local cell repair shop) can put a new screen on it? The reason I ask is because right now there is absolutely nothing that can be seen on the screen. Its completely smashed so its all black (picture attached). I just don't know if its worth trying to fix up to use as a backup or spare (or possibly sell). I don't know if the screen itself is the LED or if there are components behind the screen that might need to be repaired too. I am guessing it would probably make it too expensive to salvage but wasnt sure if anyone here has fixed one up
I put my sim in it but when I call it just goes to voicemail so don't know if its because it still needs to be set up when you first boot up or if its because other things are broken inside.
View attachment 540170
last i checked on ebay a screen replacement is about 80 bucks. not difficult at all to do yourself. there is a captivate teardown you can find in the forums.

[Q] SIM not read after screen replacement

As we all know, the phone is pretty darn well put together and surprisingly durable. But, unfortunately, it is not invincible. About a month and a half ago I cracked my screen. The phone had a case, but it wasn't anything hefty (the HTC Double Dip case). The phone was still completely usable, but I like the phone and wanted to keep it nice so I decided to replace the screen. I ordered the screen + framework assembly and it was about $55. In the past when I have replaced screens on a few iPhones and an ASUS tablet the parts were quite a bit cheaper, but whatever. My phone is the black model, but I decided to try something different and ordered the new part with red speaker grills. Most guides and such said that the M7 is a pretty hard phone to repair, but I have worked on a couple other phones before, so I gave it a go. After many, many hours of carefully prying apart the phone and transplanting the logic boards to the new screen framework I put it all back together and powered it up. To my surprise the phone powered up and the screen worked fine. (And let me tell you the red and black looks damn good). The first thing I noticed was that vibration didn't work. A bit annoying, but the phone looked good enough that I could get past that. Next I tested the speakers and noticed that at full volume the speakers sound a little bit messed up. Again, a little annoying, but I'm not a professional so I wasn't overly disappointed. Then came the real problem...
THE REAL PROBLEM:
When I put the SIM card in the phone didn't detect it. After a reboot it still didn't detect it. After a factory restore it still didn't detect it. Perhaps the ribbon cable connecting the SIM reader to the board was not all the way secured? After how hard it was to take the phone apart the first time I was not a fan of the idea of doing it again. But alas, the next day I opened the phone back up super carefully so not to damage the new parts. It was thankfully a little bit easier the second time. I made sure the SIM reader was all the way connected, but the phone still wouldn't read the SIM. I pulled the old SIM reader out from the old screen framework assembly and plugged it into the board, but the SIM was still not detected, indicating that the new screen did not come with a bad SIM reader. Has this problem happened to anyone else? What steps should I take? I now have really nice looking M7 that is essentially useless.
So does anyone have input on this?
Pr.TOSHIBA said:
So does anyone have input on this?
Click to expand...
Click to collapse
Same thing happened to me. Also swapped out the old reader without any luck.... Any update on this?
Does it detect it at all? Like ask for the pin code if you use that?
Do you have to disconnect the battery when replacing the screen on this phone? I know on some phones I repaired I had to manually set the current time and date (resets to year 1970 or something like that if you disconnect the battery) to get a signal.
Otherwise I have no idea

Did my Moto x die?

Hi everyone! I have a big problem with my moto x.
Two fridays ago I was walking and I tripped over an iron pívot with the bad luck that my moto was in my pocket. The screen didn't break because the knock was in the rear although the aluminium framework is slightly bent.
Well, that weekend the mobile was working well till Sunday and then, the screen started doing strange things, similar to the first photos. I remove the back case and disconnected/connected the connector that is at the bottom and the phone was working well during the week.
The problem is going worst because it fails with too much frequency and not all the times I disconnect/connect the famous connector it starts working well.
So, what do you thing it might be happening? Should I replace screen? Should I replace battery? Should I buy another phone?
I don't know if changing screen will solve the problem and I don't want to waste 100€ or whatever the screen costs. I left the photos below...
Thank you!
Edit: not all the times it fails, this post was writen with my moto
eTriix said:
Hi everyone! I have a big problem with my moto x.
Two fridays ago I was walking and I tripped over an iron pívot with the bad luck that my moto was in my pocket. The screen didn't break because the knock was in the rear although the aluminium framework is slightly bent.
Well, that weekend the mobile was working well till Sunday and then, the screen started doing strange things, similar to the first photos. I remove the back case and disconnected/connected the connector that is at the bottom and the phone was working well during the week.
The problem is going worst because it fails with too much frequency and not all the times I disconnect/connect the famous connector it starts working well.
So, what do you thing it might be happening? Should I replace screen? Should I replace battery? Should I buy another phone?
I don't know if changing screen will solve the problem and I don't want to waste 100€ or whatever the screen costs. I left the photos below...
Thank you!
Edit: not all the times it fails, this post was writen with my moto
Click to expand...
Click to collapse
It seems like lcd has been damaged, try these things too check your problem, remove back cover, unplug battery connector, unplug each and every connector and just fix it again these connectors in reverse order, you can get the help by ifix website search teardown of moto x 2014.. Plug your charger while power on and see if its same or pb is gone.. If its same then lcd connector or LCD panel replacement is only choice.
Salik Iqbal said:
It seems like lcd has been damaged, try these things too check your problem, remove back cover, unplug battery connector, unplug each and every connector and just fix it again these connectors in reverse order, you can get the help by ifix website search teardown of moto x 2014.. Plug your charger while power on and see if its same or pb is gone.. If its same then lcd connector or LCD panel replacement is only choice.
Click to expand...
Click to collapse
I did it, it failed during some more days and then it worked for 3 days. Yesterday it failed again, but after reboot it continued working...
Something i've noticed is that the last two days unplugging at 8.30h battery goes to 0 around 15.30 when it should last almost all day. I'm thinking that maybe, the battery could have been damaged and sometimes it doesn't send the correct voltage and then de screen fails? what do you think? should I try to change the battery?
Regards

No Audio after screen replacement

Hi,
I really need your help as I have no idea what to do.
After 1 month of using MI5 Pro Ceramic black I have broke my phone,First the touch worked and there was only vertical lines on the lcd in the spot of the shatter so I could operate but due to my stupidity and of force touching the broken glass these vertical lines started to cover all the screen (Everything worked well on the phone..Sound,Camera and etc..)
So I ordered from Aliexpress LCD + Touch screen for about 70$ (Included DHL Express shipment)
When I got the screen I started to disassamble the phone.. Got everything out,Took out the broken screen and pasted the new screen on the frame (Must say all these aliexpress screens are really bad,0% protection on the screen,Not sure about the LCD quality yet but glass is horrible..Started to scratch even before I used it)
Anyways to our point..
Started to assamble back everything.. Powered on the phone and Yay! Phone is working but...
No Sound,Firstly I checked settings and everything..Ran CIT test and everything that belongs to audio giving force close..
Calibrate Speaker PA test results : State-Get impedance failed!,Speaker Vendor-None
Vibration- FAIL no short and no long
Main mic speaker Feedback,Simulation call test,Front mic speaker feedback test,Top mic speaker feedback test,
everything when I enter it giving FC with that details :
"IlegalStateException:Unable to retrieve AudioRecord pointer for SetParameters() blablala...
Headphone mic feedback test (Called on an uninitialized AudioRecord)
So in short..
No Speaker,No Mic,No headphone Mic..
Now my question is what I need to do from now.. Its not firmware/software problem for sure as before I disassambled the phone everything worked well..
My first guess was the problem is on the Sub PCB but then I asked my self..If the USB-C is working and WiFI antenna giving full signal it means the Sub PCB works so what the hell is the problem? I really hope its not something in the PCB it self as it means throw everything to garbage.. ;<
Hope to hear suggests..
I thought to order the MI5 32GB Black version take out the Main PCB put the Pro Main PCB and put also the ceramic back cover but that I would do only if I know that the problem is from the sub PCB but if Headphone mic doesnt work (Which the Main PCB take care of) then its probably in the Main PCB??
Please help!
you didnt damage the pins on the press connector? is the press connector on the ribbon cable flush / fully inserted ? Are you sure you didnt kink the ribbon cable?
I haven't pulled a mi5 apart, but can only assume its like every other phone i have.
leighaus said:
you didnt damage the pins on the press connector? is the press connector on the ribbon cable flush / fully inserted ? Are you sure you didnt kink the ribbon cable?
I haven't pulled a mi5 apart, but can only assume its like every other phone i have.
Click to expand...
Click to collapse
The problem is that far as I understood of how the mi5 built and from how I saw it looks like..The Speaker located in the Sub PCB cover,Vibrate connected to subPCB,And all the SubPCB connected with the cable to the main PCB and I checked it connected good and no any damaged pins from what I was able to see..If there was damaged pins then the phone wont get charged as the USB-C wont be connected as it located in the SubPCB however it does work.. So I really have no idea what cause it..
Also the Headphone mic doesnt work in the tests..Anything related to Audio giving that FC with "AudioRecord" error..
I really must to know what causing it so I will know what to do ;<
Little update,
Just connected a bluetooth speaker,No any sound nothing..
Hi everyone! My MI5 has the same problems, no sound, mic, vibration, led buttons light, plugin earphones without notification's icon, can not play music, video offline and online video (Youtube, Facebook, live stream ..). It was happened when i replaced brooken screen. The first time when I turn on, evetything ok, I can play music through speaker, but now everything has gone..! Plz tell me how to slove this problem! Sorry for my poor E!
Hi, I ended up on buying the phone again... It's impossible to fix that problem as probably you did what I did and didn't place the motherboard correctly so a little bent probably happened and that cause to the problem.
edoroom said:
Hi, I ended up on buying the phone again... It's impossible to fix that problem as probably you did what I did and didn't place the motherboard correctly so a little bent probably happened and that cause to the problem.
Click to expand...
Click to collapse
Hi there! Care to elaborate a little more? I have also the same problem. I was replacing the rear camera module while the module I had received was broken to begin with. I hadn't really figured this out initially and I tried several times to attach it and test it, perhaps move the flex and retest, and at some I remember I found out the vibration was not there, but didn't pay attention to it as everything was open, until I found out the camera module was faulty in the end, and subsequently discovered also the whole issue with sound/vibration/key backlight etc. Instead of buying a new device, I was thinking to try and fix it, but still I'm a bit unsure about what the problem really was. From what I could figure, I didn't do anything different this particular time the audio/vibration didn't work, with respect to the previous times I attached and detached the motherboard. But is it definitely the board itself and not its flex connecting it to the sub-pcb? Could it be the sub-pcb itself or even both this and the board? In case I buy a new board (perhaps together with a sub-pcb just in case) to replace it which part should I watch out for, not to damage it again. Sorry for the many questions but you seem to be the only source of info for this specific problem.
deusxx said:
Hi there! Care to elaborate a little more? I have also the same problem. I was replacing the rear camera module while the module I had received was broken to begin with. I hadn't really figured this out initially and I tried several times to attach it and test it, perhaps move the flex and retest, and at some I remember I found out the vibration was not there, but didn't pay attention to it as everything was open, until I found out the camera module was faulty in the end, and subsequently discovered also the whole issue with sound/vibration/key backlight etc. Instead of buying a new device, I was thinking to try and fix it, but still I'm a bit unsure about what the problem really was. From what I could figure, I didn't do anything different this particular time the audio/vibration didn't work, with respect to the previous times I attached and detached the motherboard. But is it definitely the board itself and not its flex connecting it to the sub-pcb? Could it be the sub-pcb itself or even both this and the board? In case I buy a new board (perhaps together with a sub-pcb just in case) to replace it which part should I watch out for, not to damage it again. Sorry for the many questions but you seem to be the only source of info for this specific problem.
Click to expand...
Click to collapse
Hi sorry for late answer,I barley visit xda these times..
After I bought the MI5 again this time in the 64gb version I tested the old 128gb motherboard (The main one) and still same problem with Vibration/Sound (While all sensors work camera too)
Which means its not the sub-pcb problem,Its the main motherboard for sure,Now what cause it?
In my opinion when I pulled of the motherboard to put it on the new screen I insert it in a bad way which made it bent a little and probably the place I bent is where the audio and all the stuff goes on..
I'm pretty sure we cant really do something about that problem as problem related to motherboard it self are usually not fixable,But if you find something I will glad to get a feedback to test on my own bad motherboard so maybe I can back to the 128gb version ;| but I doubt it..
edoroom said:
Hi sorry for late answer,I barley visit xda these times..
After I bought the MI5 again this time in the 64gb version I tested the old 128gb motherboard (The main one) and still same problem with Vibration/Sound (While all sensors work camera too)
Which means its not the sub-pcb problem,Its the main motherboard for sure,Now what cause it?
In my opinion when I pulled of the motherboard to put it on the new screen I insert it in a bad way which made it bent a little and probably the place I bent is where the audio and all the stuff goes on..
I'm pretty sure we cant really do something about that problem as problem related to motherboard it self are usually not fixable,But if you find something I will glad to get a feedback to test on my own bad motherboard so maybe I can back to the 128gb version ;| but I doubt it..
Click to expand...
Click to collapse
Many thanks for the response! It sheds a little light indeed. I also ordered another phone to replace it as the cost of the motherboard seems to be equal approximately close to a new device. I'm with you, in the same view, I also once placed the motherboard quickly in the chassis without the screw that holds it together, in one of the 50 or so attempts to try and make the camera sensor I was replacing, visible to the OS, and this looseness was the unfortunate one perhaps (?). I too don't expect the sound to work again. I just wanted to double check the issue was not with the sub-pcb, which I did thanks to you. For sure I have no hopes for the mainboard to work again, but still, what keeps me from being certain it is actually the sound card that is the problem, is a very similar case I saw In a foreign forum, and also clues from my device which support the argument that the mainboard might have entered in a kind of diagnostic boot state due to a hardware fault that was apparent, where either some components are not initialized during boot, or their HW resources are taken over from the diag. ports and irqs that are enabled, in which case the issue can perhaps be fixed. For sure whenever I find a good deal on a new motherboard I will replace it, to keep it as a secondary phone, as I liked it quite a bit, but It would be interesting to see if this hypothesis holds or not. Anyway thanks again for the response!
Hi,
I've bought used mi5 with broken screen. After LCD replacement I've found that that phone has problem with sound. Exactly the same as in this thread - no sound, mic, vibration, led buttons light, plugin earphones without notification's icon, can't play music, video offline and online video (Youtube).
Someone already did LCD replacement on this phone and probably done something.
But what I discovered on this phone that problem start when battery charge aprox more then 60%.
I did flash one year old ROM via fastboot ( just to verify if it not the ROM problem) and after that everything was fine ( battery level 50%).
I did hardware test - passed 100% fine.
But when I did charge till 100% the problem come back.
That's really interesting finding... Can you tell me the same steps you did like which rom you flashed and all of that? I will check it with my dead phone maybe if I will have the same thing like you we can point on something...
mi5 lcd replaced touch not working
I bought a mi5 mobile in singapore. My display was damaged. I changed many display in india (checked in many shop). only work display (lcd). Touch not respose. please some one give solution. thank you
have same problem with op
my phone get damaged by water so im rush turn it off and open everything then go to dry it... and problem with speaker etc doesnt work just like op please help i really doesnt have money to buy new phone this month
Exactly same problem with me, just replaced the rear camera and the problem occurs
No sound, no vibration, nav led not working at all, playing video not working
Even playing sound via bluetooth speaker not working too
I believe there is something wrong with the mainboard
can anyone point out which part of the mainboard responsible for the lower board?
The lower board works well though, I tested it using other mainboard
codearm2 said:
Exactly same problem with me, just replaced the rear camera and the problem occurs
No sound, no vibration, nav led not working at all, playing video not working
Even playing sound via bluetooth speaker not working too
I believe there is something wrong with the mainboard
can anyone point out which part of the mainboard responsible for the lower board?
The lower board works well though, I tested it using other mainboard
Click to expand...
Click to collapse
For me the problem was that after the screen replacement (It may also apply to you after you replaced the rear camera..)
When I put back he main motherboard it wasnt sat properly,I put it beneath a small plastic holder and when I closed everything and screw and all..Problem appeared and when I rechecked motherboard I found out it got bent in the right down side and that's probably what killed all the sensors,sound and everything..
Of course that what happend to me..There is plenty of other reasons that may cause to what you experience..
edoroom said:
For me the problem was that after the screen replacement (It may also apply to you after you replaced the rear camera..)
When I put back he main motherboard it wasnt sat properly,I put it beneath a small plastic holder and when I closed everything and screw and all..Problem appeared and when I rechecked motherboard I found out it got bent in the right down side and that's probably what killed all the sensors,sound and everything..
Of course that what happend to me..There is plenty of other reasons that may cause to what you experience..
Click to expand...
Click to collapse
I believe the chip or something similar, that control the sensor, led, vibration etc, was broken because we put it the wrong way
now we need to find which chip it is and replace it
which part of the right down? near the signal cable?
codearm2 said:
I believe the chip or something similar, that control the sensor, led, vibration etc, was broken because we put it the wrong way
now we need to find which chip it is and replace it
which part of the right down? near the signal cable?
Click to expand...
Click to collapse
If you just checked and saw you put it wrong as I did,On the little plastic which made a little bent then I guess you lost..I would just buy new motherboard on aliexpress or just give up and buy a new phone..
As you cant really know (I mean from our side..) if its a chip related there or if its the bent it self which made problem on the connection on the board it self..
And yes I was speaking about the right side near the signal cable where you need to install the motherboard from that side where there is a little plastic like holding the motherboard..When I did the reinstall by not checking I put the motherboard on that plastic and after I closed everything and all screws got back I discovered that problem..
edoroom said:
If you just checked and saw you put it wrong as I did,On the little plastic which made a little bent then I guess you lost..I would just buy new motherboard on aliexpress or just give up and buy a new phone..
As you cant really know (I mean from our side..) if its a chip related there or if its the bent it self which made problem on the connection on the board it self..
And yes I was speaking about the right side near the signal cable where you need to install the motherboard from that side where there is a little plastic like holding the motherboard..When I did the reinstall by not checking I put the motherboard on that plastic and after I closed everything and all screws got back I discovered that problem..
Click to expand...
Click to collapse
yeah, it means it's the same mistake as mine, that little metal thing that hold the motherboard, I forgot to eject the sim card tray and when I pull my main board it was stuck, got a little bent from there
Just wonder if anyone have the schematic for mi5 mainboard, since I'm curious and want to find a way to repair it
Not because I'm in despair of needing a phone, this MI5 is my secondary phone
Just because of the curiousity, that's all
edi--
found the schematic here
https://data.dendik.id/Data/Schematic/Xiaomi/Mi5_SM.rar
now on the journey to repair this stupid mistake, lol
any help from someone who are an expert in this thing will be really appreaciated
codearm2 said:
yeah, it means it's the same mistake as mine, that little metal thing that hold the motherboard, I forgot to eject the sim card tray and when I pull my main board it was stuck, got a little bent from there
Just wonder if anyone have the schematic for mi5 mainboard, since I'm curious and want to find a way to repair it
Not because I'm in despair of needing a phone, this MI5 is my secondary phone
Just because of the curiousity, that's all
edi--
found the schematic here
https://data.dendik.id/Data/Schematic/Xiaomi/Mi5_SM.rar
now on the journey to repair this stupid mistake, lol
any help from someone who are an expert in this thing will be really appreaciated
Click to expand...
Click to collapse
ok bruh im already do some fking around and do ic audio replacement but no hope its still broke even my repair guy who are ex xiaomi worker are give up the problem is looks like from cpu its self but there was something interesting if u try download device info hw app in google play there was warning that the device cant read sys or something cuz it was blocked and when u look at audio chipset its was gone
feel2death said:
ok bruh im already do some fking around and do ic audio replacement but no hope its still broke even my repair guy who are ex xiaomi worker are give up the problem is looks like from cpu its self but there was something interesting if u try download device info hw app in google play there was warning that the device cant read sys or something cuz it was blocked and when u look at audio chipset its was gone
Click to expand...
Click to collapse
Yeah, tried it before, and the audio chip is gone
Perhaps something wrong with the audio chip, will try to replace the IC tomorrow

Categories

Resources