Database Develop

Changing a broken screen

I will soon be opening up my phone (T-mobile Pocket PC Phone Edition) to replace the glass screen with a new one ordered online. I've never even opened the phone before and was wondering if someone has performed this operation before. I would really appreciate any pointers, tricks, cautions, pictures, etc.
Thanks.

lawrence... where did u get the replacement??
i wonder if they got replacement cases! i chiped mine

The company I bought the screen from was GetHighTech, Inc, in California. By coincidence, they are about an hour's drive away from my home.
They only sell the glass screen and high capacity battery replacements. The screen comes with absolutely no documentation or instructions. I just got it a few minutes ago.

just wanted to see if you had any luck with the changeout.

Screen replaced successfully: observations
It was a tricky operation, but I finally managed to replace my broken touch screen. And the patient is alive, and only a little worse off for the experience.
I was held back for a week until I could get the right size torx screwdrivers to remove the back cover. Once inside, it was a very very tricky process slicing off the broken screen with a razor blade. It was glued to the lcd display. This would have been hard even if the screen was not shattered. Definitely needed goggles to protect against flying splinters of glass. I used cotton swabs and 99% alcohol to clean the glass dust off the glue around the edges of the lcd, then I put the new screen on while that residual gum was still a bit tacky.
There was a very thin existing plastic cover over the lcd in between the glass touch screen and the rest of the lcd. Since it did not come off with the glass, I left it in place even though it had a couple of small scratches from contact with the broken glass. It seems like it was there to keep dust off the lcd or something like that.
This was my first time inside the phone. I noticed that replacing the whole LCD component would have been a trivial task by comparision to replacing the glass alone. And even easier would have been adding a new battery.

cracked lcd on xda
hi, does anybody know where i can get a replacement for the lcd screen on my xda... its totally mashed and i need to unlock it but the screen is bad...
i live in uk... any ideas guys..
pls help out

has anyone give me pls an idea how much a new replacement screen for XDA might cost
currently I am having two XDA (one XDA and one MDA), MDA has a broken screen ... I'd like to know how much is the material (screen), I have so. to do the actual job of screen replacement
regards, monika

I replaced my touchscreen a few weeks ago. Like Lawrence said it's a little tricky and you need to be patient.
I bought my touchscreen from www.pdasmart.com/pdaphone.htm for $75 and they gave great instructions.

thank you for your kind answer
hmmm, seems like it is nice to live in US ... where all the things for XDA are almost readily available :wink:
regards, monika

Protective Acryclic Cover over the Digitizer
I have an odd problem. I have an SX56 with a broken protective cover. The protective cover is the acrylic sheet that sits between the digitizer and the outside world. Everything else works fine including the digitizer. I have found every replacement part except that cover. I've even tried local plastic stores. They don't carry the proper thickness (0.125mm).
Any thoughts or sources besides sending it in for a $200 repair?

Cracked Glass Screen

A few days ago I cracked the glass screen on my Dinc. There wasn't any significant damage aside from the crack, and my LCD screen is working fine, so I ordered a replacement on Amazon thinking I could replace it. I found a screen which reviewers claimed came with the tools necessary to replace the screens, although the product did not advertise it as such. I made the order to find that the replacement did not come with any tools, and now I am stumped. Does anyone know where I can find cheap (and usable) tools to crack open my Dinc? I was hoping to finish this before I return to college in a few weeks and I'd rather not go back with a broken screen.
Thanks in advance!

Not sure what "tools" you're looking for, but there are only a few things you need to take your dinc apart (I just did this with mine):
1. T6 screwdriver to remove 4 screws on the big red cover
2. A small flat-head screwdriver to release block clips around the big red housing and pop it off. (also used to open up the ribbon cable clips)
3. small philips-head screwdriver to remove screws securing the main board and LCD
4. X-acto knife + hairdryer to remove the digitizer (the glass that you cracked)

Do yourself a favor and order the digitizer with the frame. It eliminates the need to pry the broken glass out completely. It is a little more expensive, I think I paid $35 for mine, but well worth the time and effort! All in all it took me about an hour to complete mine! BTW, I found and ordered all the parts and tools from amazon.

Sounds like you cracked the digitizer yet you ordered a new screen?

m52 power! said:
Sounds like you cracked the digitizer yet you ordered a new screen?
Click to expand...
Click to collapse
Although the sentence structure is somewhat ambiguous, it sounds like he bought the correct replacement part, a digitizer.

swatmedic911 said:
Do yourself a favor and order the digitizer with the frame. It eliminates the need to pry the broken glass out completely. It is a little more expensive, I think I paid $35 for mine, but well worth the time and effort! All in all it took me about an hour to complete mine! BTW, I found and ordered all the parts and tools from amazon.
Click to expand...
Click to collapse
I'll vouch for this, it's the biggest headache to replace JUST the glass.
Since you already got the glass, you can go ahead and order a bezel by itself if you want... make sure you get one that has adhesive on the metal lip on the inside so the dust won't get in there

swatmedic911 said:
Do yourself a favor and order the digitizer with the frame. It eliminates the need to pry the broken glass out completely. It is a little more expensive, I think I paid $35 for mine, but well worth the time and effort! All in all it took me about an hour to complete mine! BTW, I found and ordered all the parts and tools from amazon.
Click to expand...
Click to collapse
Exactly. I made the mistake of ordering JUST the screen and it was a complete headache. I subsequently ordered the frame/screen combo. Much easier.
Sent from my ADR6300 using XDA App

yeah i replaced mine but now i have trouble with the touch screen not working right. It randomly registers touches on the screen. Hope you don't run in to the same issue.

Glad to hear people are having success replacing these. I have a friend who's cracked his recently and will pass this thread on to him.

I replaced my screen with the digitizer/screen combo bought on amazon for under $20. it's a pain to install, but I found a good video on youtube and used their blowdryer method to make the glue more easy to manage and allow the screen to come off in fewer pieces. Also when you put the little ribbons back into their connectors make sure you get them all the way in - I had 256 color-like graphics for a little bit until I reconnected the screen properly

I've done it multiple times. I'm not clumsy, I just got the phone broken in the first place .
While it would make it easier to get the bezel, it can be done fine with just the digitizer.
They give you all the little plastic tools you need usually.
The last time I did it I used Krazy glue instead of very thin double sided tape.
I can answer any specific questions you have when replacing the digitizer if you want.
One request I have for you:
When I put the trackball back into place I wasn't sure if I did the correct order. It still works but it looks a little more recessed then it should be. Not a big deal, but it annoys me a tiny bit that my phone isn't perfect.
Could you record the exact order in which you disassemble it? It might even help you out later

drizzt5;19538891
One request I have for you:
When I put the trackball back into place I wasn't sure if I did the correct order. It still works but it looks a little more recessed then it should be. Not a big deal said:
I just replaced my screen tonight with an amazon digitizer kit and my trackball is also recessed. Might just open it back up and jam some leftover adhesive underneath it. I would recommend buying the frame though as it was a bit of a b*tch prying broken glass shards and adhesive from the thing. Would also make the phone look better as well..
Click to expand...
Click to collapse

i dont have a cracked screen but a very banged up bezel and battery cover. i calculated it and everything will cost me a total of $35 to replace. this includes the digitizer, bezel, battery cover and camera lens. cant wait to get this done.
thanks for the info on here.

Order the digitizer WITH the housing shell. I cracked my screen, too, and ordered the digitizer/screen only and ended up damaging my housing shell. The hairdryer trick is bogus and doesn't work very well, so spend the extra $10 to get the housing.
I was going to repare the screen to resell on Ebay, but since I broke the housing, I decided to just sell the actual AMOLED screen for $40. I'll find other parts I can sell, too, such as the motherboard and camera piece. Might actually end up making more money. Ah well.
I don't use Verizon anymore, which is why I ditched the DInc. Will miss it though. I do love HTC Sense. I have a Samsung Exhibit II now.

My first time doing this was with the digitizer only. Biggest mistake of my life! I could've made it work, but I was getting it replaced since it was bricked and superglue oozing out the sides might have raised some eyebrows. Digitizer+frame, void sticker, and 2 weeks later I had a "new" dinc.

Do I Just Need a New Digitizer?

Hi everyone,
Hope my question makes sense - I dropped my phone last night and the screen cracked. Not the LCD, just the glass. But... The touch is perfect. There's just cracked glass.
I saw a listing in eBay that had just the "front glass" cover part for like $6. Naturally, if I can NOT pay $250+ for a fixed phone, that'd be great. So, does anyone know what exactly it is that I'd need to buy to fix this myself?
Thanks in advance!
EDIT: This link has the "glass lens" I was talking about.
http://www.etradesupply.com/motorola-nexus-6-glass-lens-black.html

The glass and digitizer are almost always fused together. If you can get them seperated you'll likely never get the replacement glass attached in a way that will look normal. These things are typically replaced as a unit because of this.

They come glued together and actually removing the glass lens without damaging anything else is very VERY difficult. Best option is to buy a new LCD/digitiser in one and swap them out. I know its expensive but i can ensure you trying to change just the glass is a nightmare!

I've done a couple screens like this and they are a PITA!
If you heat them up enough you can separate the two but in some cases the heat needed damages the screen. It's one of those things that you can "try" it but go into it knowing that it most-likely won't work unless you have a ton of patients. The key is getting all of the glue that bonds the two parts off of the screen/digitizer so the new glass can lay flat and seal.

Interesting. Does the glass not need to be rebonded?

[Q] Glass Replacement

Hi guys.
I've dropped my xt1068 on a floor and the glass got cracked although the screen works perfectly (no damaged parts at all). I've buyed the replacement glass from ebay (this one http://www.ebay.com/itm/Black-Front...244?pt=LH_DefaultDomain_0&hash=item566c04b4ec ).
My question is, have anyone passed through this situation? Is there any way to replace it without damaging the screen? I heard that glass is glued to the digitalizer screen and I'm worried.
Any thoughts?

Antique_Angel said:
Hi guys.
I've dropped my xt1068 on a floor and the glass got cracked although the screen works perfectly (no damaged parts at all). I've buyed the replacement glass from ebay (this one http://www.ebay.com/itm/Black-Front...244?pt=LH_DefaultDomain_0&hash=item566c04b4ec ).
My question is, have anyone passed through this situation? Is there any way to replace it without damaging the screen? I heard that glass is glued to the digitalizer screen and I'm worried.
Any thoughts?
Click to expand...
Click to collapse
I don't think it is glued, but if it is try putting some light heat on it, not real hot though. The glass is meant to be replaced. I'm guessing you have the disassemble instructions.
https://www.ifixit.com/Guide/Motorola+Moto+G+2nd+gen.+2014+LCD+screen+Replacement/36180

Tel864 said:
I don't think it is glued, but if it is try putting some light heat on it, not real hot though. The glass is meant to be replaced. I'm guessing you have the disassemble instructions.
https://www.ifixit.com/Guide/Motorola+Moto+G+2nd+gen.+2014+LCD+screen+Replacement/36180
Click to expand...
Click to collapse
Thanks. But the video shows how to replace the whole screen, I just bought the glass (which I need to replace). I've little concerned about separating glass from screen.
And the only tutorial I found is for samsung galaxy s4.

Antique_Angel said:
Thanks. But the video shows how to replace the whole screen, I just bought the glass (which I need to replace). I've little concerned about separating glass from screen.
And the only tutorial I found is for samsung galaxy s4.
Click to expand...
Click to collapse
I'd give it a shot. The worst you could do is have to put it back together with the broken glass. It's a pretty straightforward job taking it apart. Just be careful with the pins on the cables you unplug.

Tel864 said:
I'd give it a shot. The worst you could do is have to put it back together with the broken glass. It's a pretty straightforward job taking it apart. Just be careful with the pins on the cables you unplug.
Click to expand...
Click to collapse
Thanks!
I've also bought a uv glue to glue it better. After the process, I'll share the results.

Cracked screen & bezel

So I bought this Mi Mix dirt cheap because it had a cracked screen and the bezel is cracked also. Where’s a good place to get replacement parts. I’ve heard of isssues with the lcd and ambient light sensors. Can someone point me in the right direction? The lcd is fine on my phone but the glass is cracked. Is it possible to replace the glass or is it just easier to replace the whole assembly?

reID.entify said:
So I bought this Mi Mix dirt cheap because it had a cracked screen and the bezel is cracked also. Where’s a good place to get replacement parts. I’ve heard of isssues with the lcd and ambient light sensors. Can someone point me in the right direction? The lcd is fine on my phone but the glass is cracked. Is it possible to replace the glass or is it just easier to replace the whole assembly?
Click to expand...
Click to collapse
How much did you pay?
Mi Mix - Epic Pro

Replacing whole unit would be easier but costlier , replacing glass is cheaper but not easy, you'll need a lot of patience if your are fixing it on your own(or if some expert agrees on doing it for ya might be a plus point), you'll need special adhesive to bind glass to screen,most people use some sort of thin thread to remove glass from LCD, I have seen few people replacing AMOLED panels which are even more thinner then the IPS on Mi Mix but its not easy process lots of things should be kept in mind ,and you might end up breaking your display
1*See if someone is buying that display then sell it and buy a whole new assembly
2*If 1 is no help then you'll be left with 2 options replace glass or assembly
Either way you can give replacing glass a try if you get the glass cheaper
Replacing whole assembly is your last resort
Check you jerryrigeverthing channel on YouTube he did disassemble Mi Mix and he also replaced glass on a samsung oled panel
Sent from my MIX using Tapatalk

Paid $100 for the 6GB + 256GB one. Though the $100 came from recycling soda pop cans which were given to me. So in the end I didn’t pay out of pocket for it.

reID.entify said:
Paid $100 for the 6GB + 256GB one. Though the $100 came from recycling soda pop cans which were given to me. So in the end I didn’t pay out of pocket for it.
Click to expand...
Click to collapse
Woah man congrats!!! That's super cheap
Sent from my MIX using Tapatalk

Last time I checked the full assembly plus frame cost upwards of 200$, not including service costs of course.
Which means that fixing up that beast is still going to be pretty pricy.
If you have the tools, skills and patience to do it though then that's definitely a goal worth pursuing.
Keep us updated on your progress, I love following DIY projects like these.

Looks like vopmart sells the bezel for 90 and the screen assembly for 100 + 10 for frame. Hmmm. What to do... Gotta check out some more teardowns to see if I want to do it myself. But from what I can see it doesn’t look to bad. I’m just not sure about the optic glue + glass & ips panel.

Little update on this. Went to the local cellphone repair shop and asked a quote for a lcd assembly replacement. I was quoted for $120 total (parts & labor) for full assembly replacement. Which also includes lifetime warranty on the screen as long as the screen is available. The repair guy was looking for screens on eBay including the frame for the lcd. Seems pretty damn good if you ask me and I wouldn't have to do the dirty work. But thing is I don't know how well they do repairs. Also, I forgot to ask for a quote for the bezel.

reID.entify said:
Paid $100 for the 6GB + 256GB one. Though the $100 came from recycling soda pop cans which were given to me. So in the end I didn’t pay out of pocket for it.
Click to expand...
Click to collapse
holy ****, you got lucky man. here people still asking 400 $ with cracked screen.

Well I got around to fixing my Mix. Very easy to repair, now looks brand new!

Deleted

reID.entify said:
Well I got around to fixing my Mix. Very easy to repair, now looks brand new!
Click to expand...
Click to collapse
Did the original adhesive hold the new screen in? what about the back panel?
getting ready to do this myself, any tips? any additional parts I need to order in advance besides the lcd panel?
Thanks
G

Can you post the part and the guide you used for repair?

naveenthafriend said:
Can you post the part and the guide you used for repair?
Click to expand...
Click to collapse
There are some teardowns on YouTube, quite easy with a few hurdles, the hardest part for me was removing the battery, there are tabs you pull that's supposed to help but they just snapped on me. If you're lucky it might work if not don't rush it or the battery will puncture and you will need a new one, the copy batteries are crap. Watch the teardowns a few times and you will get it. AliExpress was where I got mine there are loads of sellers with them. You will need some b7000 glue as the replacements don't have adhesive on them. The glue is very cheap and the screen come with tools.

Where did you buy it?
reID.entify said:
Well I got around to fixing my Mix. Very easy to repair, now looks brand new!
Click to expand...
Click to collapse
Where did you buy the LCD?
Thanks

Tatu_CS said:
Where did you buy the LCD?
Thanks
Click to expand...
Click to collapse
You need to be very selective when buying the LCD. Almost all of them do not have the oleophobic coating turning the screen into a smudgefest within minutes. I replaced my coated screen with an uncoated screen initially and it was disgusting. Luckily it was defective so I returned it for my money back and then went to Aliexpress. This vendor has the only coated version I know of:
https://de.aliexpress.com/item/For-...61ef335&transAbTest=ae803_2&priceBeautifyAB=0
Sorry for the lengthy URL. He claims to have the coating and he acutually delivers on the claim. Another important factor is the middle frame which is included and already attached to the screen. Man screens come without it and you then need to pry the old one off and glue it to the new screen. Often the glue is not strong enough and the diesplay will lift out of the phones body. Sure, it is more expensive than other options, but worth every cent. The display is fee of defects, sits flush with the ceramic frame and makes the phone look pristine.

hquant said:
You need to be very selective when buying the LCD. Almost all of them do not have the oleophobic coating turning the screen into a smudgefest within minutes. I replaced my coated screen with an uncoated screen initially and it was disgusting. Luckily it was defective so I returned it for my money back and then went to Aliexpress. This vendor has the only coated version I know of:
https://de.aliexpress.com/item/For-...61ef335&transAbTest=ae803_2&priceBeautifyAB=0
Sorry for the lengthy URL. He claims to have the coating and he acutually delivers on the claim. Another important factor is the middle frame which is included and already attached to the screen. Man screens come without it and you then need to pry the old one off and glue it to the new screen. Often the glue is not strong enough and the diesplay will lift out of the phones body. Sure, it is more expensive than other options, but worth every cent. The display is fee of defects, sits flush with the ceramic frame and makes the phone look pristine.
Click to expand...
Click to collapse
This is all true, mine is smudge magnet, I can live with it but annoying everything else is ok, I clean the screen with solution then use liquid car Wax to add a bit of a coating against fingerprints, 3 coats of car Wax and a good polish off. Helps a little bit with smudges. It feels really smooth afterwards.

Got my Xiaomi Mi Mix Complete Assembly Replaced by ShatterFix
reID.entify said:
So I bought this Mi Mix dirt cheap because it had a cracked screen and the bezel is cracked also. Where’s a good place to get replacement parts. I’ve heard of isssues with the lcd and ambient light sensors. Can someone point me in the right direction? The lcd is fine on my phone but the glass is cracked. Is it possible to replace the glass or is it just easier to replace the whole assembly?
Click to expand...
Click to collapse
I got my mi mix screen replaced by ShatterFix (www dot shatterfix dot com). Heard of them from a friend. They have pickup and delivery service across India.
They replaced it with a 100% genuine screen and delivered back on the very next day.
Costed me 9599 INR. Service centre was asking 13.5k here in Delhi.