Related
I will soon be opening up my phone (T-mobile Pocket PC Phone Edition) to replace the glass screen with a new one ordered online. I've never even opened the phone before and was wondering if someone has performed this operation before. I would really appreciate any pointers, tricks, cautions, pictures, etc.
Thanks.
lawrence... where did u get the replacement??
i wonder if they got replacement cases! i chiped mine
The company I bought the screen from was GetHighTech, Inc, in California. By coincidence, they are about an hour's drive away from my home.
They only sell the glass screen and high capacity battery replacements. The screen comes with absolutely no documentation or instructions. I just got it a few minutes ago.
just wanted to see if you had any luck with the changeout.
Screen replaced successfully: observations
It was a tricky operation, but I finally managed to replace my broken touch screen. And the patient is alive, and only a little worse off for the experience.
I was held back for a week until I could get the right size torx screwdrivers to remove the back cover. Once inside, it was a very very tricky process slicing off the broken screen with a razor blade. It was glued to the lcd display. This would have been hard even if the screen was not shattered. Definitely needed goggles to protect against flying splinters of glass. I used cotton swabs and 99% alcohol to clean the glass dust off the glue around the edges of the lcd, then I put the new screen on while that residual gum was still a bit tacky.
There was a very thin existing plastic cover over the lcd in between the glass touch screen and the rest of the lcd. Since it did not come off with the glass, I left it in place even though it had a couple of small scratches from contact with the broken glass. It seems like it was there to keep dust off the lcd or something like that.
This was my first time inside the phone. I noticed that replacing the whole LCD component would have been a trivial task by comparision to replacing the glass alone. And even easier would have been adding a new battery.
cracked lcd on xda
hi, does anybody know where i can get a replacement for the lcd screen on my xda... its totally mashed and i need to unlock it but the screen is bad...
i live in uk... any ideas guys..
pls help out
has anyone give me pls an idea how much a new replacement screen for XDA might cost
currently I am having two XDA (one XDA and one MDA), MDA has a broken screen ... I'd like to know how much is the material (screen), I have so. to do the actual job of screen replacement
regards, monika
I replaced my touchscreen a few weeks ago. Like Lawrence said it's a little tricky and you need to be patient.
I bought my touchscreen from www.pdasmart.com/pdaphone.htm for $75 and they gave great instructions.
thank you for your kind answer
hmmm, seems like it is nice to live in US ... where all the things for XDA are almost readily available :wink:
regards, monika
Protective Acryclic Cover over the Digitizer
I have an odd problem. I have an SX56 with a broken protective cover. The protective cover is the acrylic sheet that sits between the digitizer and the outside world. Everything else works fine including the digitizer. I have found every replacement part except that cover. I've even tried local plastic stores. They don't carry the proper thickness (0.125mm).
Any thoughts or sources besides sending it in for a $200 repair?
hi,
I have a crack line on my Samsung Captivate screen and I've been researching on how to replace the front lens without replacing the entire LCD assembly because to be fair the LCD is still good and all that needs replacing is the front glass.
Anyone seen anything or know anything about disassembling the LCD module?
i believe its all one unit glued together. thats why none of the ATT boys have been able to remove or scratch off the ATT logo
75 to 139 bucks on ebay
but like glue can be seperated right? Like has anyone tried giving it the heatgun treatment? I'd do mine but I dont have a replacement yet so I don't dare try
not recommended, with that kind of heat the plastic wraps and it will not fit anymore, change the whole screen, its the easiest way
well... that pretty much kills it...... i'll most prob buy a replacement LCD. But I am genuinely curious about it and I guess when the new AMOLED arrives I guess I'll have something to play around with......
anyone tried dissolving the glue?
well I smashed my lens on front of my screen and I notice that they sell the lens only on ebay now, has anyone found a way to check the lens only yet?
A few days ago I cracked the glass screen on my Dinc. There wasn't any significant damage aside from the crack, and my LCD screen is working fine, so I ordered a replacement on Amazon thinking I could replace it. I found a screen which reviewers claimed came with the tools necessary to replace the screens, although the product did not advertise it as such. I made the order to find that the replacement did not come with any tools, and now I am stumped. Does anyone know where I can find cheap (and usable) tools to crack open my Dinc? I was hoping to finish this before I return to college in a few weeks and I'd rather not go back with a broken screen.
Thanks in advance!
Not sure what "tools" you're looking for, but there are only a few things you need to take your dinc apart (I just did this with mine):
1. T6 screwdriver to remove 4 screws on the big red cover
2. A small flat-head screwdriver to release block clips around the big red housing and pop it off. (also used to open up the ribbon cable clips)
3. small philips-head screwdriver to remove screws securing the main board and LCD
4. X-acto knife + hairdryer to remove the digitizer (the glass that you cracked)
Do yourself a favor and order the digitizer with the frame. It eliminates the need to pry the broken glass out completely. It is a little more expensive, I think I paid $35 for mine, but well worth the time and effort! All in all it took me about an hour to complete mine! BTW, I found and ordered all the parts and tools from amazon.
Sounds like you cracked the digitizer yet you ordered a new screen?
m52 power! said:
Sounds like you cracked the digitizer yet you ordered a new screen?
Click to expand...
Click to collapse
Although the sentence structure is somewhat ambiguous, it sounds like he bought the correct replacement part, a digitizer.
swatmedic911 said:
Do yourself a favor and order the digitizer with the frame. It eliminates the need to pry the broken glass out completely. It is a little more expensive, I think I paid $35 for mine, but well worth the time and effort! All in all it took me about an hour to complete mine! BTW, I found and ordered all the parts and tools from amazon.
Click to expand...
Click to collapse
I'll vouch for this, it's the biggest headache to replace JUST the glass.
Since you already got the glass, you can go ahead and order a bezel by itself if you want... make sure you get one that has adhesive on the metal lip on the inside so the dust won't get in there
swatmedic911 said:
Do yourself a favor and order the digitizer with the frame. It eliminates the need to pry the broken glass out completely. It is a little more expensive, I think I paid $35 for mine, but well worth the time and effort! All in all it took me about an hour to complete mine! BTW, I found and ordered all the parts and tools from amazon.
Click to expand...
Click to collapse
Exactly. I made the mistake of ordering JUST the screen and it was a complete headache. I subsequently ordered the frame/screen combo. Much easier.
Sent from my ADR6300 using XDA App
yeah i replaced mine but now i have trouble with the touch screen not working right. It randomly registers touches on the screen. Hope you don't run in to the same issue.
Glad to hear people are having success replacing these. I have a friend who's cracked his recently and will pass this thread on to him.
I replaced my screen with the digitizer/screen combo bought on amazon for under $20. it's a pain to install, but I found a good video on youtube and used their blowdryer method to make the glue more easy to manage and allow the screen to come off in fewer pieces. Also when you put the little ribbons back into their connectors make sure you get them all the way in - I had 256 color-like graphics for a little bit until I reconnected the screen properly
I've done it multiple times. I'm not clumsy, I just got the phone broken in the first place .
While it would make it easier to get the bezel, it can be done fine with just the digitizer.
They give you all the little plastic tools you need usually.
The last time I did it I used Krazy glue instead of very thin double sided tape.
I can answer any specific questions you have when replacing the digitizer if you want.
One request I have for you:
When I put the trackball back into place I wasn't sure if I did the correct order. It still works but it looks a little more recessed then it should be. Not a big deal, but it annoys me a tiny bit that my phone isn't perfect.
Could you record the exact order in which you disassemble it? It might even help you out later
drizzt5;19538891
One request I have for you:
When I put the trackball back into place I wasn't sure if I did the correct order. It still works but it looks a little more recessed then it should be. Not a big deal said:
I just replaced my screen tonight with an amazon digitizer kit and my trackball is also recessed. Might just open it back up and jam some leftover adhesive underneath it. I would recommend buying the frame though as it was a bit of a b*tch prying broken glass shards and adhesive from the thing. Would also make the phone look better as well..
Click to expand...
Click to collapse
i dont have a cracked screen but a very banged up bezel and battery cover. i calculated it and everything will cost me a total of $35 to replace. this includes the digitizer, bezel, battery cover and camera lens. cant wait to get this done.
thanks for the info on here.
Order the digitizer WITH the housing shell. I cracked my screen, too, and ordered the digitizer/screen only and ended up damaging my housing shell. The hairdryer trick is bogus and doesn't work very well, so spend the extra $10 to get the housing.
I was going to repare the screen to resell on Ebay, but since I broke the housing, I decided to just sell the actual AMOLED screen for $40. I'll find other parts I can sell, too, such as the motherboard and camera piece. Might actually end up making more money. Ah well.
I don't use Verizon anymore, which is why I ditched the DInc. Will miss it though. I do love HTC Sense. I have a Samsung Exhibit II now.
My first time doing this was with the digitizer only. Biggest mistake of my life! I could've made it work, but I was getting it replaced since it was bricked and superglue oozing out the sides might have raised some eyebrows. Digitizer+frame, void sticker, and 2 weeks later I had a "new" dinc.
Hi all,
I recently fell whilst holding my brand new N6 and cracked the screen pretty bad. The digitiser and LCD appear to work OK, so I'm taking the plunge and will try and replace the glass myself.
I've replaced the display module (glass, LCD and digitiser) for a number of family/friend's phones and feel comfortable about working with the small electronics. I've been reading and watching countless tutorials on the removal of the glass from the rest of the display assembly but and yet to find any information specifically about doing this on the N6. Specifically, I'm worried about how the speakers will affect the glass removal process.
If anyone has any N6 specific info, it would be most appreciated. I'm waiting for the replacement glass to arrive, I'll update this thread with how i get on!
Check out
https://www.ifixit.com/Device/Nexus_6
Sent from my Nexus 6 using Tapatalk
good luck, I have only managed to get anew screen on an iphone 4, failed miserably with my Nexus 7 2012, and I was clued up about what to do....
violentbydezign said:
Check out
https://www.ifixit.com/Device/Nexus_6
Click to expand...
Click to collapse
I've been through that. Will be useful to get me to the display module, but would have been nice if they showed what it looks like in more detail. I'll be sure to take lots of pictures when i do this and maybe a video.
mediaman123 said:
good luck, I have only managed to get anew screen on an iphone 4, failed miserably with my Nexus 7 2012, and I was clued up about what to do....
Click to expand...
Click to collapse
Did you try replacing just the glass or the whole display module? What went wrong? I'm also about to replace the display module on the N7 2012, the glass is cracked and half the digitiser doesn't work.
dixonl90 said:
Did you try replacing just the glass or the whole display module? What went wrong? I'm also about to replace the display module on the N7 2012, the glass is cracked and half the digitiser doesn't work.
Click to expand...
Click to collapse
with the iphone it was both the LCD and Digitizer I was replacing and they came together as one................same with the N7, both together, trying to install/remove these separately is suicide unless you have the right tools etc........
Have you bought the LCD/Digitizer toggether inside the silver bezel, I didn't, and I should have.........
basically there was a small cable on the back of the LCD/Digitizer that was present on the old damaged module, but not on the new one I had bought, I tried removing form the old and into the new, plugged in the normal power and screen cables, but then nothing, didn't work, my frustration also resulted in a small crack to the new screen.............
it possible but you need to have patience and the tools, which it sound like you do.......but its much easier already inside the silver bezel...........
the screen was glued into the bezel and removing this was murder, managed it, but had to pick out all the smashed glass bit by bit........
don't let me put you off though, you sound more competent than me........
mediaman123 said:
with the iphone it was both the LCD and Digitizer I was replacing and they came together as one................same with the N7, both together, trying to install/remove these separately is suicide unless you have the right tools etc........
Have you bought the LCD/Digitizer toggether inside the silver bezel, I didn't, and I should have.........
basically there was a small cable on the back of the LCD/Digitizer that was present on the old damaged module, but not on the new one I had bought, I tried removing form the old and into the new, plugged in the normal power and screen cables, but then nothing, didn't work, my frustration also resulted in a small crack to the new screen.............
it possible but you need to have patience and the tools, which it sound like you do.......but its much easier already inside the silver bezel...........
the screen was glued into the bezel and removing this was murder, managed it, but had to pick out all the smashed glass bit by bit........
don't let me put you off though, you sound more competent than me........
Click to expand...
Click to collapse
I haven't bought the replacement display module yet for the Nexus 7. Thanks for the info, think i'll try and get one with a bezel to be on the safe side.
its definitely the way to go as you will just be popping off the back cover, releasing the ribbon cables, removing some screws, peeling back some adhesive tape and that's you.........
and any dings to the bezel will dissapear too............
Removing the LCD ribbon cable on N6 is PITA I don't want to even think how to plug in the new one. The digitizer is easy since there is lock on it but the LCD just plugs in with lots of friction.
Any tips?
dixonl90 said:
Hi all,
I recently fell whilst holding my brand new N6 and cracked the screen pretty bad. The digitiser and LCD appear to work OK, so I'm taking the plunge and will try and replace the glass myself.
I've replaced the display module (glass, LCD and digitiser) for a number of family/friend's phones and feel comfortable about working with the small electronics. I've been reading and watching countless tutorials on the removal of the glass from the rest of the display assembly but and yet to find any information specifically about doing this on the N6. Specifically, I'm worried about how the speakers will affect the glass removal process.
If anyone has any N6 specific info, it would be most appreciated. I'm waiting for the replacement glass to arrive, I'll update this thread with how i get on!
Click to expand...
Click to collapse
hi, how you repair cracked screen on your n6?
can you replace glass screen only or screen complete(digitizer/lcd)?
pichigui said:
hi, how you repair cracked screen on your n6?
can you replace glass screen only or screen complete(digitizer/lcd)?
Click to expand...
Click to collapse
Unless you have the right equipment and lots of time buy the whole assembly.
You can watch videos on youtube how complicated is to separate the glass from LCD
£122 repair cost in UK.
Update
I'm experiencing the same problem. I've replaced the digitizers/screens on all versions of the iPhone and also on the Samsung Galaxy S4. I successfully replaced only the glass on some Samsung devices too. I'm wondering if I'll be able to do this with the Nexus 6 if I just buy the $10 replacement glass.
Thanks. Hope to hear your results soon.
EDIT: I've scoured YouTube in search of videos showing how to replace the GLASS ONLY, but I can only find videos showing how to replace the entire digitizer. So I'm desperate for any information on this. Haha.
cguarinus said:
I'm experiencing the same problem. I've replaced the digitizers/screens on all versions of the iPhone and also on the Samsung Galaxy S4. I successfully replaced only the glass on some Samsung devices too. I'm wondering if I'll be able to do this with the Nexus 6 if I just buy the $10 replacement glass.
Thanks. Hope to hear your results soon.
EDIT: I've scoured YouTube in search of videos showing how to replace the GLASS ONLY, but I can only find videos showing how to replace the entire digitizer. So I'm desperate for any information on this. Haha.
Click to expand...
Click to collapse
I was reading ifixit's how to guide. They state that the digitizer is fused to the glass. Possibly that's why everyone stops at this step.....
dixonl90 said:
Hi all,
I recently fell whilst holding my brand new N6 and cracked the screen pretty bad. The digitiser and LCD appear to work OK, so I'm taking the plunge and will try and replace the glass myself.
I've replaced the display module (glass, LCD and digitiser) for a number of family/friend's phones and feel comfortable about working with the small electronics. I've been reading and watching countless tutorials on the removal of the glass from the rest of the display assembly but and yet to find any information specifically about doing this on the N6. Specifically, I'm worried about how the speakers will affect the glass removal process.
If anyone has any N6 specific info, it would be most appreciated. I'm waiting for the replacement glass to arrive, I'll update this thread with how i get on!
Click to expand...
Click to collapse
What course of action did you end up taking with this problem?
robdevil said:
£122 repair cost in UK.
Click to expand...
Click to collapse
Can I ask where this is from? I've cracked the glass, screen works fine.
yes the glass repair is possible i am uploading photos of the process i did. i do work for a cell phone repair company and this has been a very common repair. Nexus 6 glass only repair with the use of OCA (optical clear adhesive) and bonded together with an ridge to ridge lamintator and and mini autoclave.
It turns out Motorola Official repair was £128 plus the postage to send them the phone in the first place.
I am unfortunately in the same boat. I sustained probably 15 scratches that my fingernail could get stuck on them all. My phone scraped along an artificial hardwood floor when a dog stepped on it facedown and slid. So I bought some cerium oxide in an attempt to sand down and buff away the scratches. I was not successful, and it looks like I added some more scratches. I'm going to put up with them until I get more, then replace the screen & digitizer probably while also adding a screen protector. I hate the feel of screen protectors though
tmotech88 said:
yes the glass repair is possible i am uploading photos of the process i did. i do work for a cell phone repair company and this has been a very common repair. Nexus 6 glass only repair with the use of OCA (optical clear adhesive) and bonded together with an ridge to ridge lamintator and and mini autoclave.
Click to expand...
Click to collapse
Impressive. What's your process for separating the cracked glass from the digitizer?
Although I'm sure the OP was asking for a way that doesn't require thousands of dollars worth of specialized equipment.
Has the OP given up on this project? I cracked my glass the other day however the digitizer still works just fine. I wanted to know if there was a do it yourself way to change the crystal without having to purchase a digitizer/crystal combo?
Thanks
Screen is very very delicate on these.
Does anyone know a place to get the screen,the waterproof stickers, and anything else I would need for this thing?
Thanks
IllicitTweakin said:
Screen is very very delicate on these.
Does anyone know a place to get the screen,the waterproof stickers, and anything else I would need for this thing?
Thanks
Click to expand...
Click to collapse
I see couple on eBay, not sure if they'll ship to your location. Send a message to the seller first to double check the compatibility by mentioning your model number. Also make sure it's OEM (don't see Sony logo but they're probably showing a generic picture) & it comes with the adhesive. I'd also get a shatterproof screen protector this time!
http://www.ebay.com/itm/New-Black-L...-plus-E6553-/311424740690?hash=item48825c6d52
http://www.ebay.com/itm/New-LCD-Dis...53-Black-TN-/351496024978?hash=item51d6cbb392
Here's a video of the screen replacement (Z3, not Z3+ but should be similar process).
https://www.ifixit.com/Guide/Sony+Xperia+Z3+Dual+LCD+screen+Replacement/32660
You probably should not reuse the back cover adhesive (keep it clean of dust in case you have to reuse by mildly heating it. If anyone else knows the adhesive type, please chime in!
Good luck!
no fun
Doubt a screen protector would have helped. It literally gently fell 6" and shattered, the touch did not work after this.
Basically all parts you can find are fake. Those ones you posted are likely fake. The cheap one definitely is.
I got the parts needed from etrade supply. You need the front and back stickers. No stickers can be reused. You need the aux port sticker which is not available.
All the videos that show how to take it apart are misleading. They have already taken it apart and removed all the glue and stickers then put it back together. It will be way more work than it shows in the video.
In the videos it shows to remove the ear speaker DO NOT do it. If you do like I did you will need the earpiece sticker that is not available.
It does not show in the videos that a small black piece falls out when you remove the usb port/cable/board. My guess is they don't know where it go's, so they don't show you. The people that make the videos are the ones tying to sell the replacement parts.
Etrade did not have the front sticker they have a housing with the sticker on it. I got this. It is FAKE, it will not work. It is plastic the screw holes are not in the right spots. The heatpipe is fake it is just a sticker. You can not remove the screen sticker so it was a waste.
This is the fake housing http://www.etradesupply.com/sony-xperia-z3-front-housing-black.html
So have spent 300 dollar CAD. the phone is all in parts and I still need more parts. Mainly the front screen sticker.
The battery maybe wrecked because you have to pry hard to get it out because it is glued in. It is bent now. The lightest effort bent it off the start.
I have replaced many screens on other peoples non sony phones before.
Don't underestimate a screen protector, it helps and it works. Had the original z and dropped n number of times from various heights to grounds, both glass didn't even scratch or crack a bit.