[Q&A] CyanogenMod 12 - Lollipop - Pre-Nightly Shakeout - Asus Transformer TF701

Q&A for CyanogenMod 12 - Lollipop - Pre-Nightly Shakeout
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for CyanogenMod 12 - Lollipop - Pre-Nightly Shakeout. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

CM12 dead space on launcher screen
Installed this shakeout looks great!
I have unusable screen real estate on the left and right sidesnof the launcher is this normal?

Resolution and DPI changes in lollipop
With root enabled you can use ResUI from the themes and apps section and DPI changer from the play store. You have to have root enabled for the changes to take effect I believe.

If u make ur grid size custom and scroll down so its the largest, a 9x8 I believe, it uses most of it

ROM Pershoot TF701T 20150227 testing results
so, since I have less than 10 posts, this will automatically be put in the wrong Q&A section. Anyway, I'm running Pershoot's new TF701T Rom 20150227 and want to give some feedback since I also ran the prior version. If an OP would kindly take this restriction off so I can actually post in the correct thread...
This version is much more responsive than the 20150205 Rom. I am using this Rom with Google Keyboard to type this voice message! Everything seems to run very smooth YouTube is good. WiFi is quick, internet and embedded videos are great! Google Apps work fine. Almost 24 hours now and no slow down, battery use is normal and it barely uses any power during sleep.
The only thing I see missing is screen mirroring. Until that is implemented, it can't be a daily user for me. I have not tested GPS yet, & I wonder about the Nvidia specific drivers for the Tegra 4. I do not play games much and have not had a chance to test that either. All in all, it seems like a very stable base!

Miracast & Screen casting
Any idea when screen casting will be implemented? I have been playing with the latest build and all seems great! The settings menu is quite confusing and took forever to find the keyboard settings... I also find it difficult to find other settings that are common in prior Android versions. Is there anyway to keep the KitKat version of settings? ?

getting there... CM 12 testing
okay, so I'm using the current cm 12 20150309. I actually get to enable miracast and see receiving devices but I cannot connect to them. I have tried with a LC Smart TV and a Roku streaming stick which neither will connect. Also, the stock 442 version will only connect to the lc tv and not the streaming stick... the Roku is still in beta just to let you know.
this is also getting posted in the wrong thread again! hopefully the OP will recognize this and I don't think that is even recognizing that this is the third posting of mine! My posts are not getting counted...

i've enabled wifi display and protected buffers support for it (also enabled in the CM11 build); ensure its checked (in casting; wireless display). i have no way to test. you'd need to post logs and i'll see what i can do, or submit a patch which sorts it out to gerrit, against the known working device.

more testing... 20150311
Once again I am using the latest cm build with Google keyboard to voice type this message. this build is definitely quick and responsive and miracast or screencasting is almost functional. I have tried about a hundred combinations of settings on both receiving devices and this tablet without success. Also I noticed that I cannot connect to an external Bluetooth speaker without the launcher crashing when trying to use the volume keys. The Bluetooth speaker will connect but there is no sound and it crashes the launcher. Seems to me as a buffering or memory allocation issue since both devices want to connect but cannot finalize the handshake.
Let me know what the easiest way to pull log files off of this tablet is and I will see what I can help with... ???

Take note of the 'Known Issues' (on DB), and you will see the workaround for the Bluetooth issue (un-select Phone Audio on the device's BT settings).
Pull a logcat while trying to connect to a known working Miracast device and post it.
Thx.

10-4...
pershoot said:
Take note of the 'Known Issues' (on DB), and you will see the workaround for the Bluetooth issue (un-select Phone Audio on the device's BT settings).
Pull a logcat while trying to connect to a known working Miracast device and post it.
Thx.
Click to expand...
Click to collapse
will do, I'll see what I can get you tomorrow for some fresh logs... ?

Howdy strangers...!
So, I am just playing around with Pershoot's new cm 12 OS and I am wondering why hundreds of people view this thread and nobody contributes! There must be many more people out there that can provide debugging and log information than just me! Let's all work together and get this done ASAP! Don't be intimidated to contribute to this thread! We need all the input everybody has on everything!?

K94U said:
So, I am just playing around with Pershoot's new cm 12 OS and I am wondering why hundreds of people view this thread and nobody contributes! There must be many more people out there that can provide debugging and log information than just me! Let's all work together and get this done ASAP! Don't be intimidated to contribute to this thread! We need all the input everybody has on everything!?
Click to expand...
Click to collapse
Havent miracast or something like this. BT speaker is working here. Atm i havent any problem with this build (except ui battery symbol of dock isnt visible)
Gesendet von meinem LG-D855 mit Tapatalk

20150313 miracast log
Here is the log file... Tried to connect miracast to the LG TV 3 times in different ways. Also, the stock browser has no upload options for attaching documents to XDA posts. I got my Bluetooth speaker working... Thanks!!!
I do not know why this log file ended up having such a long name but it is the original file.

20150313 miracast log for Roku
Here is the log file for trying to connect miracast to the Roku streaming stick. I tried 3 times and it tries to connect then the roku immediately goes back to the home screen. Thanks!

more casting info
I have a verizon wireless galaxy s4 that connects to both the LG TV and the Roku streaming stick just fine running the latest stock 442. The latest stock version 11. 4.1. 29 for this tablet will only connect to the LG TV after numerous tries but not the Roku. ?

I haven't looked at your log as of yet. but please only post the one from the device that is known working against stock.
Please also post a log from stock of it working.
Thx.

Just noticed this week while I was away that when a USB is plugged into the dock everything works however there is no notification that it is plugged in and there is no way to eject it. Also if you close the dock while it is plugged in and then open it it tells you that it was not safely removed. I am not sure if that is stock behavior or not and it is not really an issue if I could eject it properly.

Turn off MTP and you should get eject options in storage.

pershoot said:
Turn off MTP and you should get eject options in storage.
Click to expand...
Click to collapse
pick up 3/15 and you'll get the extended options for USB in storage.

Related

working Android on TOPAZ

Hi,
can someone help me with my issue with Android ?
It doesn't work after LOOOONG boot:
1. camera
2. Wifi
3. GSM module + data connection
This things are the most important for me and it doesn't work.
Do you have tips because this procedure upwards doesn't work.
I configure it with this procedure from samsanchez88:
http://forum.xda-developers.com/showthread.php?t=641021&page=154
Or do you have some other procedure in which will work: GSM module, GPS, WIFI and Camera ?
Thanks for help.
GSM Fix
In the Setup.txt you will notice close to the end there is a command Force_CDMA=1 change the 1 to a 0.
As far as the WiFi, It works fine on mine so does the WiFi Router.
Camera is not working yet.
Smleth said:
In the Setup.txt you will notice close to the end there is a command Force_CDMA=1 change the 1 to a 0.
As far as the WiFi, It works fine on mine so does the WiFi Router.
Camera is not working yet.
Click to expand...
Click to collapse
Does will somebody fix the camrea problem or rather will fix this issue in Android 2.2?
Does the data connection works on your Topaz [ EDGE, UMTS, HSPDA ] ?
Currently zImage or kennel for topaz is incomplete, despite xdandroid builds are working fine on other devices except camera, such as original diamond. So, topaz has some functionalities being worked on.The lastest achievement is gps(buggy) and slight power management.The camera is not even supported by android according to xdandroid page. This does not seem to be zImage problem.
If you want most complete bleading edge kenel drivers and fix bugs, go to glemsom.anapnea.net/android/htc-msm-android/ and read people's comments and download accordingly.(some builds are screwed bewarned)
Camera
So Camera will never work on TOPAZ ?
It doesnt work the data connection why ? It also doesn't work ?
Why doesnt work moutUSB as external storage ? It also doesn't work ?
devs are working on everything.
camera support is comming that is only thing not supported by haret android system yet.
mount usb does not work because simply you cannot afford to give sd card to pc while you are using it. That does not mean impossible as devs are again working on it.
data is actually working go above link to replace zimage with latest version(do read people's comments if data is working. ) and it should work. is sad that shadowline abandoned the thread and android devs are seem to be working more on bringing leo to android instead of topaz...
go wiki and read advanced user section pls....
1. Do you know when exactly will work the camera [ in 2 months, 3 monts, 4 monts ] ?
2. It have sense to work as function "mount usb" - flash disk, I use it on Win Mobile everyday as flash disk. Do someone of devs want work on it?
3.Will someone work also on the power managment that the device can run at least one day ?
4. Why doesn't work the speaker or headphones when I play music ?
Thanks for info.
As squarememory says, the developers are working on all this issues. Porting android and a linux kernel to this phones is not a simple job. The kernel support general hard, but the config for the phone is very specific. Adjusting drivers to work with the phone's hard implies a lot of work.
Grab a seat, take it easy, they are doing an excellent job, and when they got issues solved, you gonna see the results reflected in the repos.
I know that they are doing goog job but can you tell me just rough estimation when main bugs [ Power, Camera, SOUND from speakers or headset ] will be solved ?
Thanks.
Mate, no one is paying them to do this, they're not a company or selling this as a product. And like everyone else they have a Real Life, a job, family, etc.
That will be ready when they have time and when they can solve the problems.
1 day, 20 years or never. No one will never know, so try help instead of asking when or why because no one here have the obligation to do it.
Dude, I know they do that for free and have theirs lives. But human is not patient if something like and that's my story. I appreciate their work because it's amazing to run different OS on the same phone.
That's it. I didn't want to bother anyone.
be patient or buy an andriod device.
I know the answer. And it is... "nobody knows"
Porting is a serious job, which requires TONS of inspiration, time and knowledge. Let's suppose "knowledge" is a fixed value (at least not decreasing during the process), but "time" and "inspiration" can't really be estimated.
In other words, it's a hack and it will be there... when it is ready
for this to work you'll need to have the latest "modules-*******" for topaz file
@ all
For connection with sd-card and management about android,read this thread.
With the last kernel and XDAndroid it works like a charme.
http://forum.xda-developers.com/showthread.php?t=815940
greetz
pego2007
Only thing that not working on my topaz is the camera,but i hope they can fix it soon.

[Q] kabaldans CM10 nightly - some issues

hey folks,
I have been following all the Milestone development threads since the very beginning, and have gone through each inkarnation of kabaldans incredible work since CM6. Recently, I updated to CM10 (first without, now with 2nd boot) and am absolutely amazed by how far our good old milestone has come. While playing around with it quite a bit, I have come across some problems (I would love to report them in the appropriate development thread, but the 10-post-count won't let me unfortunately.)
First, I really loved the keyboard multipress-system since I live in Germany and have to enter Umlauts very frequently (ä, ö, ü, etc.). The multipress-system sped that up greatly. Now, although the corresponding settings are there in the Milestone-specific part of the Settings-app, multipressing actually doesn't work for me in CM10. Is that problem specific to me, or is multipress not yet fully integrated in CM10?
The second thing I noticed (probably since 2nd boot, but I am not entirely sure) is, that in the Settings under About Phone > Status neither IME nor Serial number are displayed (instead, it says "unknown"). This also prevents me from launching Whats App - it quits saying "Your phone could not be identified ....".
Does anyone else experience those issues - and/or could perhaps somebody please post this into the CM10 development thread, so kabaldan notices?
thanks, mvol
mvol said:
hey folks,
I have been following all the Milestone development threads since the very beginning, and have gone through each inkarnation of kabaldans incredible work since CM6. Recently, I updated to CM10 (first without, now with 2nd boot) and am absolutely amazed by how far our good old milestone has come. While playing around with it quite a bit, I have come across some problems (I would love to report them in the appropriate development thread, but the 10-post-count won't let me unfortunately.)
First, I really loved the keyboard multipress-system since I live in Germany and have to enter Umlauts very frequently (ä, ö, ü, etc.). The multipress-system sped that up greatly. Now, although the corresponding settings are there in the Milestone-specific part of the Settings-app, multipressing actually doesn't work for me in CM10. Is that problem specific to me, or is multipress not yet fully integrated in CM10?
The second thing I noticed (probably since 2nd boot, but I am not entirely sure) is, that in the Settings under About Phone > Status neither IME nor Serial number are displayed (instead, it says "unknown"). This also prevents me from launching Whats App - it quits saying "Your phone could not be identified ....".
Does anyone else experience those issues - and/or could perhaps somebody please post this into the CM10 development thread, so kabaldan notices?
thanks, mvol
Click to expand...
Click to collapse
I have issue like this, and I can see IMEI and IMEI SV, but the Serial Number is "unknown".
after doing a full wipe, IMEI now shows up for me as well, but unknown serial and multipress problems remain.
mvol said:
hey folks,
(I would love to report them in the appropriate development thread, but the 10-post-count won't let me unfortunately.)
Click to expand...
Click to collapse
You are almost at the 10th post.
Maybe wiping everything is a solution for that?
mvol said:
hey folks,
I have been following all the Milestone development threads since the very beginning, and have gone through each inkarnation of kabaldans incredible work since CM6. Recently, I updated to CM10 (first without, now with 2nd boot) and am absolutely amazed by how far our good old milestone has come. While playing around with it quite a bit, I have come across some problems (I would love to report them in the appropriate development thread, but the 10-post-count won't let me unfortunately.)
First, I really loved the keyboard multipress-system since I live in Germany and have to enter Umlauts very frequently (ä, ö, ü, etc.). The multipress-system sped that up greatly. Now, although the corresponding settings are there in the Milestone-specific part of the Settings-app, multipressing actually doesn't work for me in CM10. Is that problem specific to me, or is multipress not yet fully integrated in CM10?
The second thing I noticed (probably since 2nd boot, but I am not entirely sure) is, that in the Settings under About Phone > Status neither IME nor Serial number are displayed (instead, it says "unknown"). This also prevents me from launching Whats App - it quits saying "Your phone could not be identified ....".
Does anyone else experience those issues - and/or could perhaps somebody please post this into the CM10 development thread, so kabaldan notices?
thanks, mvol
Click to expand...
Click to collapse
Hi mvol,
I am running the new CN10 10/24, the seril reports also Unkown but it doesnt stop me from running and using WhatsApp app.
regards
EP
WhatsApp now works - it looks like the full wipe which solved the unknown IMEI problem also fixed WhatsApp.
mvol said:
WhatsApp now works - it looks like the full wipe which solved the unknown IMEI problem also fixed WhatsApp.
Click to expand...
Click to collapse
Realy ? I will have a try !
I also went through this and really soh after giving a factory reset was decided that in fact
have you guys tried multipress using the hardware keyboard? Does it work for you?
mvol said:
have you guys tried multipress using the hardware keyboard? Does it work for you?
Click to expand...
Click to collapse
here using the shift and alt is working normally above 2 keys simultaneous ... not tested on that specifically, you will use more than 2 simultaneous keys?
with "multipress" I mean the feature invented by nadlabak/kabaldan that allows one to press the same key multiple times very quickly to enter special characters (like pressing "a" two times very fast producing "ä", for example.) It worked perfectly for me in CM7, but it doesn't anymore in CM10...
anyone, please?
It works fine for me. I use it frequently.
mvol: I still haven't found the time to implement the multipress feature completely in CM10. Only a few of the final bits is missing. Please be patient.
thanks for your answer - in that case, I'll wait patiently
Link not working for me
Hi All,
Im unable to access the latest builds for milestone CM10 by kabaldan. Please can anybody provide alternate link?
Thanks
Hello people!
I'm a long time CM ( 6 and 7 ) user on my Milestone.
After updating it to CM10 ( full wipe, ext3 partition formatted ), adb does not find my device anymore.
I have changed the USB settings and enabled the debugger in development, but nothing changes. Even after a restart.
Running on Ubuntu 12.10.
Any ideas?
Thanks!
The issue I have is quite annoying, if I can use such a word in a development stage . After each restart, the network is being forgotten, so I have to switch to the airplane mod off and on.
@pt0: This is a known issue, if I can say that. I experience this too, though not after every restart. I think it's a problem we can live with.

[Q&A] [DAILY][UNOFFICIAL] Stock CM12 builds [31.12.2014]

Q&A for [DAILY][UNOFFICIAL] Stock CM12 builds [31.12.2014]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [DAILY][UNOFFICIAL] Stock CM12 builds [31.12.2014]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
rooted and unlocked
inffy said:
New Build up @ OP
Should fix the phone fc.
Click to expand...
Click to collapse
mmm
https://plus.google.com/115164035530157900974/posts/iE3uL3ATA3W?pid=6098971328030833826&oid=115164035530157900974
supereos1 said:
mmm
https://plus.google.com/11516403553...6098971328030833826&oid=115164035530157900974
Click to expand...
Click to collapse
Next time you should make your post more informative and not have your first XDA post to contain 3 letters and a link.
Firstly, did you wipe?
Secondly, update your TWRP. Latest is 2.8.3.1, then try flashing again.
Two bugs I think I have found
First is the bluetooth, when playing music and receiving notification alert the volume will jack up and distort. Secondly Cast Screen will not detect my SmartTV although when I go to Setting>WiFi>Advance>WiFi Direct it will detect the TV but will not cast my to screen to the TV but works fine with Chromecast.
violentbydezign said:
First is the bluetooth, when playing music and receiving notification alert the volume will jack up and distort. Secondly Cast Screen will not detect my SmartTV although when I go to Setting>WiFi>Advance>WiFi Direct it will detect the TV but will not cast my to screen to the TV but works fine with Chromecast.
Click to expand...
Click to collapse
Both are known problems and hopefully will be fixed soon
Went back to stock and now I'm going to try this out again. Are we still flashing rom-gapps-su?
jadams212510 said:
Went back to stock and now I'm going to try this out again. Are we still flashing rom-gapps-su?
Click to expand...
Click to collapse
Yes
Saw in the main thread that others were experiencing the system ui crashes during the encryption unlock pin stage of bootup.
I had this too, but it did go away after I did a clean install (for unrelated reasons).
malcalevak said:
Saw in the main thread that others were experiencing the system ui crashes during the encryption unlock pin stage of bootup.
I had this too, but it did go away after I did a clean install (for unrelated reasons).
Click to expand...
Click to collapse
Apparently it comes back after your next dirty flash.
Anyone having issues with WiFi connection?
After 3 to 4 hours of standby , my WiFi says authentication issue but when I click on connect again , it connects fine
Having this issue on multiple routers
chowdarygm said:
Anyone having issues with WiFi connection?
After 3 to 4 hours of standby , my WiFi says authentication issue but when I click on connect again , it connects fine
Having this issue on multiple routers
Click to expand...
Click to collapse
Haven't noticed this kind of behaviour on mine. WiFi connects fine and the connection is keeping alive all the time
now i have the offcial encrypted CM, if i flash this one i got the phone unecryped or i need to wipe all?
EasyDeath said:
now i have the offcial encrypted CM, if i flash this one i got the phone unecryped or i need to wipe all?
Click to expand...
Click to collapse
If your phone is already encrypted it will stay encrypted. Only way is wipe userdata (backup your internal memory)
ok, when i'll have more time i'll try, hope i get some little boost on performance

[Q&A] [ROM][5.0.2][SaberMod] Benzo Rom

Q&A for [ROM][5.0.2][SaberMod] Benzo Rom
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][5.0.2][SaberMod] Benzo Rom. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Thank You!
This looks awesome! Thank You!!
dallas1164 said:
This looks awesome! Thank You!!
Click to expand...
Click to collapse
No problem. Hope you enjoy it.
Sent from my Nexus 6
[Req] Canadian people lookup for Dialer?
Hey, awesome work with this ROM. I'm a lurker but not new to flashing, just rarely post.
I remember on KitKat there being a few ROM's that had Canadian people lookup (Yellow/White Pages and another service) - any chance you could add this back in? It was one of the most useful features for people that get a lot of calls from strangers/clients.
Cheers mate!
Love the name Benzo, aka benzodiazapenes
I took xanny bars and had to taper off using Valium during my experimenting days, fun times. But ya so the audio doesn't work correctly when you plug it into an aux source. It plays the audio through the phones built in speakers instead of channeling the music through the auxiliary input
Gsidthekid said:
I took xanny bars and had to taper off using Valium during my experimenting days, fun times. But ya so the audio doesn't work correctly when you plug it into an aux source. It plays the audio through the phones built in speakers instead of channeling the music through the auxiliary input
Click to expand...
Click to collapse
I can also confirm that I get this as well.
Also the always on "Ok, Google" will not let me record, no matter how many time I have tried.
google Now
No longer working... anyone else having this issue?
Anyone have any idea why google now is not in the ROM? Is it a setting? Also...anyone having issues with changing DPI? Mine states 398...but does not look it. Thanks.
Sent from my Nexus 6 using XDA Free mobile app
Google Now launcher
I like this rom, the only thing stopping me from using it as my everyday driver is that I am unable to use the Google Now launcher. Is this a bug or intentally left off? Also is the new version built on LMY47E?
LMY47E radio
I flashed the latest radio and bootloader and it is totally worth it for the WORKING VoLTE and I feel the data connection or speeds are slightly stronger. In the Columbus Ohio area, and getting ~30 Mbps down and ~25 up
Ok, so anyone else got the dreammanagerservice wakelock? I've been using ambient display all the time without the wakelock, that is until the latest build.
I have a problem whit deep sleep, solution?
Thanks and good Rom!
mafiastyle said:
I have a problem whit deep sleep, solution?
Thanks and good Rom!
Click to expand...
Click to collapse
Download Disable service, choose System and Google play services. Enable system update. Helped me deep sleep.
lmy47m
Can I flash this over the t mobile version of 5.1
Can't flash rom
When attempting to flash the rom using TWRP 2.8.5, i get the error message "failed to mount /dev/block/platform/msm_sdcc.1/byname".
I have wiped data, cache and dalvik before attempting to install.
Edit: Turns out it did flash correctly. I just tried booting into system and it was successful, i just took that message as a bad thing
Exchange Problem
Hello, I'm running Benzo rom on my Nexus 6 and for some reason I cannot setup an exchange email through the Gmail app. It just force closes before it let's me set the email as a device administrator.
Thank you
Anyone else having major issues?
I love this ROM and I want to stick with it but i'm having some major issues.
1. My LTE on ATT wont work. It will sometimes connect but wont work until it goes back down to HSPA+ (Yes i'm on ATT LTE and have deleted the other APNs)
2. My device wont go into deep sleep. It's been awake since I have turned it on
3. Due to the last two, my battery is not good at all.
Anyone know any fixes?
Script for those having deep sleeps issues http://forum.xda-developers.com/google-nexus-5/general/script-google-play-services-battery-t3059585
Shamu/Hammerhead/Flounder Dkwhq www.jsand.dk
No OTAs by OpenDelta , someone else is wrong? Thanks
EDIT: Sorry, opendelta run!!
Can't change double tap to wake.
I've tried altering it in the settings and the kernel settings but the double tap to wake stays on.

[Q&A] [ROM][Development][DOGO] CM12.1 / CyanogenMod 12.1

Q&A for [ROM][Development][DOGO] CM12.1 / CyanogenMod 12.1
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][Development][DOGO] CM12.1 / CyanogenMod 12.1. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
running 5.0.2 rooted firmware in c5502..
i am running lollipop 5.0.2 in my indian variant of xperia zr(5502)......its damn smooth and great battery backup....in indian c5502 hasn't get lollipop updates
What are the main bugs at the moment?
Sent from my C5503 using XDA Free mobile app
About the 0711 build
Hi qsnc
You've done a great job! The latest build works perfectly as far as I've noticed.
One detail however is that the phone reboots when apps like google+ or maps try to use the location service.
This seems to be a common problem on other devices, when I'm searched about it.
It only reboots if Location mode is set to High accuracy(Wi-fi, cellular and GPS)
So changing it to Device only(GPS) or Battery saving(Cellular and GPS), then there's no reboot.
I did a wipe before installation.
Tried also to do a second installation, with a more recent gapps package, but with the same result.
There is a logcat from the crash at
projects.wallin.ws/file-cabinet/logcat150713.txt?attredirects=0&d=1
Location service makes phone reboot
Hi again
Iv'e noticed one another thing. I can run the phone with Location mode set to High accuracy, without having it rebooting if I disable cellular networking. Setting Location mode to Device only, is probably the best workaround right now. Battery saving is of no big use (are only using cellular and wifi, I was wrong about it in the previous post!)
*update*
There is a kmsg at
projects.wallin.ws/file-cabinet/kmsg-crash.txt?attredirects=0&d=1
from when it crashes with high accuracy enabled
One interesting thing is that rmnet_usb throws up some errors about it's called with unsupported commands.
pkwn said:
Hi again
Iv'e noticed one another thing. I can run the phone with Location mode set to High accuracy, without having it rebooting if I disable cellular networking. Setting Location mode to Device only, is probably the best workaround right now. Battery saving is of no big use (are only using cellular and wifi, I was wrong about it in the previous post!)
*update*
I have attached kmsg-crash.txt from when it crashes with high accuracy enabled
One interesting thing is that rmnet_usb throws up some errors about it's called with unsupported commands.
Click to expand...
Click to collapse
pkwn said:
Hi qsnc
You've done a great job! The latest build works perfectly as far as I've noticed.
One detail however is that the phone reboots when apps like google+ or maps try to use the location service.
This seems to be a common problem on other devices, when I'm searched about it.
It only reboots if Location mode is set to High accuracy(Wi-fi, cellular and GPS)
So changing it to Device only(GPS) or Battery saving(Cellular and GPS), then there's no reboot.
I did a wipe before installation.
Tried also to do a second installation, with a more recent gapps package, but with the same result.
I have attached a logcat from the crash
Click to expand...
Click to collapse
@qsnc
+1 rmnet_usb bug
one more user had problem with location services I hope these logs would be enough!
thank you @pkwn @qsnc
Looking good.
I would just like to report that I have been running cm-12.1-20150711-UNOFFICIAL-dogo.zip for two days now and it's working very well.
I have not used High accuracy Location mode.
The only problem I have had is with the build it recovery image. Just as reported by sigprof it is crippled. The gui is not sized properly and I could not install gapps or supersu from .zip's. It will not mount my sd card. I ended up installing TWRP in FOTA.
is anyone working on comparing the audio paths as @qsnc mentioned here?
http://forum.xda-developers.com/showpost.php?p=62186043&postcount=69
No GPS?
Hi,
I've been running qsnc's cm-12.1-20150806-UNOFFICIAL-dogo.zip now for two weeks now and it's working really great!
But today I wanted to use GPS and could not get any signal (in device only and in high accuracy mode). I used the app "GPS Status" for info and there were no satellites at all, so it does not seem to be a problem of the GPS fix but the satellite searching.
Anyone else having this problem (and maybe a solution?) Would deliver logs if this could help fixing this issue...
________________________________________
Phone: Sony Xperia ZR (dogo)
ROM: CyanogenMod 12.1 (cm-12.1-20150806-UNOFFICIAL-dogo)
Kernel: 3.4.0-cm-ge347aa9-00482-g5a80a17
Recovery: TWRP 2.8.7.0 (http://forum.xda-developers.com/xperia-zr/development/fota-twrp-f2fs-recovery-zr-t3136901)
Xposed v71 / 20150816 / SDK22 (http://forum.xda-developers.com/xposed/super-alpha-posted-permission-xposed-t3072979)
anon96 said:
Hi,
I've been running qsnc's cm-12.1-20150806-UNOFFICIAL-dogo.zip now for two weeks now and it's working really great!
But today I wanted to use GPS and could not get any signal (in device only and in high accuracy mode). I used the app "GPS Status" for info and there were no satellites at all, so it does not seem to be a problem of the GPS fix but the satellite searching.
Anyone else having this problem (and maybe a solution?) Would deliver logs if this could help fixing this issue...
Click to expand...
Click to collapse
I found the error (looking at the logs): I should not have frozen fused location provider with Titanium Backup.
Even when I don't use it (in device only mode), apparently it is needed for GPS to work.
CM13.0-20160707-UNOFFICIAL-dogo build tested.
Working fine!
I'm using this build as my daily driver now.
I thought first there was an issue with 5ghz wifi, but that seems to work too.
Great work @qsnc!
I have experienced some strange issues with the touchscreen becoming unresponsive after the screen have been locked for a while. The only way to get it working is to remove the battery and start the phone again. I've only had this problem with the cm13 160707 build. I will try to retrieve some logs next time this happen.
pkwn said:
I have experienced some strange issues with the touchscreen becoming unresponsive after the screen have been locked for a while. The only way to get it working is to remove the battery and start the phone again. I've only had this problem with the cm13 160707 build. I will try to retrieve some logs next time this happen.
Click to expand...
Click to collapse
Did you disable "double tap to wake" option?
No, but I've deactivated it now. Could that be the cause?
LaudaDev said:
Did you disable "double tap to wake" option?
Click to expand...
Click to collapse
pkwn said:
No, but I've deactivated it now. Could that be the cause?
Click to expand...
Click to collapse
Yes, that's the cause probably. Test it now and you'll see if that fixed the problem.
Now I'm getting random reboots.I did also disable double tap to sleep. Anyone else having these issues? The rom was dirty flashed. Should I try doing a clean wipe?
Sent from my Xperia ZR using XDA-Developers mobile app

Categories

Resources