Does anybody know how I can flash a rom on my Tmobile D415. In recovery rom flash stops and says cannot flash over incompatible data. Says this package is for D415 only, and this is a D415DS, which it is not. Any ideas?
Related
ok I have 2.2 currently installed with stock recovery and I am not able to flash a custom recovery yet my bootloader is unlocked. I am getting random restarts and an error that says "system process error"
If i were to flash an older radio like the one i had before upgrading to 2.2 would anything negative happen? and then would i be able to flash a 2.1 rom? cuz i try flashing a 2.1 rom but get an error with a message "status 2"
Hello everyone. Got a problem here with a G Flex phone. I flashed a custom T-mobile ROM and Sprint (Boot.img and modem.bin) and everything was fine but this did not unlock the phone. Then i tried to flash it to D955. The second ROM flashed with no issues and also it did not unlock it. After that i entered TWRP did a full wipe and selected reboot recovery (because the phone had some issues detecting OTG USB). After that my phone did not enter TWRP and shows me a black screen when i try to enter TWRP. Download mode works but i can't flash it to stock because i get CrossDL [D955] to [LS995] error. I tried several DLLs (D959, LS995 and LGUP_8974) but they don't help, i still get CrossDL error in LG Flash Tool. Any ideas ??
Problem solved by editing tot file with winhex.
do you still have the custom rom ?
let me explain everything why have i created this thread.
My phone was only charging when switched off. I was on Lineage OS (by daniel_hk) at that time so i thought it is because of that custom ROM.
I, then, intended to flash stock ROM, this one: https://forum.xda-developers.com/k3-note/development/official-build-lenovo-k3-note-k50a40-6-t3370537
debloated version.
I booted into TWRP recovery (v3.1.1-2 by daniel_hk).
Wiped everything and tried flashing K3 Note S433 Debloated ROM from the link i mentioned above. I received error 7. Now i was stuck without any OS in the phone.
Then I tried to flash other version of twrp (3.1.1-0) in phone using sp flash tool but received another error- "PMT is changed for the ROM! It must be downloaded" :/
I googled and found the solution is format the flash using sp flash tool. I did it and flashed the recovery but my phone went dead completely! No responses at all.
Finally i decided to install the original S433 ROM in K3 Note using SP Flash tool but then i receved another error - "BROM: Error 4008"
Then I tried another version of SP Flash tool, v5.1628 (previously v5.1604), Received the PMT changed error then formatted again then flashed the Original ROM.
Now my phone is Unbricked but still not charging and i have no IMEI also.
Favours/Helps that i want-
1. Main thing i want my phone to charge when it is powered on. Watched this video on youtube https://www.youtube.com/watch?v=N7qtDMu_WTU but I am not able to enter Engineering Mode.
2. I want to install debloated version of this ROM through TWRP and for that i have to flash twrp now but to flash TWRP i will need to format using SP Flash tool first (becuase of error "PMT is Changed in the ROM") and if i do that my phone will be bricked again! If i somehow flashed the recovery then i'll not be able to flash the debloated version of the ROM because of the "Error 7".
3. Want my IMEI back
Any Help will be really appreciated.
And sorry if any similar thread already exists I couldn't find the best solution for me anywhere so i created my own!
dude , first thing to remember;
even if your os is completely gone and recovery option is still working , then don't ever do these stupid things.
I've been in your place . But i always knows that if your recovery is still working then there's 99.9% you can fix it.but it seems like you've ruined everything with other flash tools. Dude , unlike every phones, k3 note has it's own k3 note manager software available in xda forums. You can download twrp backups here . Lenovo stock rom backup was here, only you have to do is download and place it on the correct folder. Then press restore!!!
But you ruined everything. I don't know if it turn on again. You came here after all of this and asking us to help now? I
install a custom rom after installing the stockrom (which got error7 during install)
after u get error7 when installing the firmware,,you wont have any os for the phone to boot.
just flash someother custom rom after u got that error.. phone will boot up.
Please compare whether all files of the stockrom you downloaded are extracted,i got error 7,and when i investigated the reason was that one of the file inside the rar file was not extracted.which inturn caused error during instalation
aK_mr3'ofive said:
let me explain everything why have i created this thread.
My phone was only charging when switched off. I was on Lineage OS (by daniel_hk) at that time so i thought it is because of that custom ROM.
I, then, intended to flash stock ROM, this one: https://forum.xda-developers.com/k3-note/development/official-build-lenovo-k3-note-k50a40-6-t3370537
debloated version.
I booted into TWRP recovery (v3.1.1-2 by daniel_hk).
Wiped everything and tried flashing K3 Note S433 Debloated ROM from the link i mentioned above. I received error 7. Now i was stuck without any OS in the phone.
Then I tried to flash other version of twrp (3.1.1-0) in phone using sp flash tool but received another error- "PMT is changed for the ROM! It must be downloaded" :/
I googled and found the solution is format the flash using sp flash tool. I did it and flashed the recovery but my phone went dead completely! No responses at all.
Finally i decided to install the original S433 ROM in K3 Note using SP Flash tool but then i receved another error - "BROM: Error 4008"
Then I tried another version of SP Flash tool, v5.1628 (previously v5.1604), Received the PMT changed error then formatted again then flashed the Original ROM.
Now my phone is Unbricked but still not charging and i have no IMEI also.
Favours/Helps that i want-
1. Main thing i want my phone to charge when it is powered on. Watched this video on youtube https://www.youtube.com/watch?v=N7qtDMu_WTU but I am not able to enter Engineering Mode.
2. I want to install debloated version of this ROM through TWRP and for that i have to flash twrp now but to flash TWRP i will need to format using SP Flash tool first (becuase of error "PMT is Changed in the ROM") and if i do that my phone will be bricked again! If i somehow flashed the recovery then i'll not be able to flash the debloated version of the ROM because of the "Error 7".
3. Want my IMEI back
Any Help will be really appreciated.
And sorry if any similar thread already exists I couldn't find the best solution for me anywhere so i created my own!
Click to expand...
Click to collapse
i hv facing same issue try every think bt nothing is work thn i hv flash my phone sp flash with original stock rom and when i flash i untk recovery option bcoz in 89 percent i got error than aftr untk it successfully flash and when i start i only show twrp thn i reconnect my phone to pc and untck all in stock rom only tck recovery and successfully flash recover and restart my mobile....... and boom its work nw i very happy
aK_mr3'ofive said:
let me explain everything why have i created this thread.
My phone was only charging when switched off. I was on Lineage OS (by daniel_hk) at that time so i thought it is because of that custom ROM.
I, then, intended to flash stock ROM, this one: https://forum.xda-developers.com/k3-note/development/official-build-lenovo-k3-note-k50a40-6-t3370537
debloated version.
I booted into TWRP recovery (v3.1.1-2 by daniel_hk).
Wiped everything and tried flashing K3 Note S433 Debloated ROM from the link i mentioned above. I received error 7. Now i was stuck without any OS in the phone.
Then I tried to flash other version of twrp (3.1.1-0) in phone using sp flash tool but received another error- "PMT is changed for the ROM! It must be downloaded" :/
I googled and found the solution is format the flash using sp flash tool. I did it and flashed the recovery but my phone went dead completely! No responses at all.
Finally i decided to install the original S433 ROM in K3 Note using SP Flash tool but then i receved another error - "BROM: Error 4008"
Then I tried another version of SP Flash tool, v5.1628 (previously v5.1604), Received the PMT changed error then formatted again then flashed the Original ROM.
Now my phone is Unbricked but still not charging and i have no IMEI also.
Favours/Helps that i want-
1. Main thing i want my phone to charge when it is powered on. Watched this video on youtube https://www.youtube.com/watch?v=N7qtDMu_WTU but I am not able to enter Engineering Mode.
2. I want to install debloated version of this ROM through TWRP and for that i have to flash twrp now but to flash TWRP i will need to format using SP Flash tool first (becuase of error "PMT is Changed in the ROM") and if i do that my phone will be bricked again! If i somehow flashed the recovery then i'll not be able to flash the debloated version of the ROM because of the "Error 7".
3. Want my IMEI back
Any Help will be really appreciated.
And sorry if any similar thread already exists I couldn't find the best solution for me anywhere so i created my own!
Click to expand...
Click to collapse
hows your phone?? alive??
how to fix my redmi4x I accidentally messed it up I cant install the global rom and firm ware, it says THE SYSTEM CANT FIND THE SPECIFIED FILE can anyboby help me here?
If your device's bootloader unlock then flash fastboot rom through mi flash tools(internal data may get wiped). or flash it via custom recovery.
If you could give some more details it may help understand what exactly happened, maybe share error picture or something.
Hi everyone, I wanted to root my phone because my google pay way not working after I unlocked the bootloader of my phone.
I used magisk to flash a version for my redmi 2201117TY, but after using fastboot to flash my "patched" rom back to my phone, it is now booting over and over again.
I installed twrp to try to install another ROM, but I'm not sure it'll work.
I installed several redmi note 11 img to see if it would fix it but i did not (V13.0.6.0.SGKEUXM, V14.0.2.0.TGKMIXM and V13.0.3.0.SGKEUSF which was my original one i suppose)
I just want to have an usable phone even if it means cleaning everything. How can I format everything back to make it usable?
I have access to adb, fastboot, TWRP. (usb debugger on)
I am not sure I can find the exact rom as it was a really wierd version from my operator (SGKEUSF) and I can only find one on internet which happen to not work. How can I unbrick my phone now?
NOTE : the SGKEUSF is an overlayer of the SFR (Altis) network so i would rather not use it
Format (not wipe) data in twrp, flash a rom that fits your needs (on sdcard), reboot recovery (!), reboot system. If fastboot access is given it's fixable. Had the same thing many times with spesn. This is the way it always works for me.
When you say "flash a rom", you mean a recovery or a fastboot one? Does it have an influence?
Just download latest version of MiFlash, download RN11 fastboot ROM, flash the ROM via MiFlash. In MiFlash make sure to to check the box whether of not to lock the bootloader after flash. Just to be safe leave it unlocked until after the phone is safe.