Hello everyone. Got a problem here with a G Flex phone. I flashed a custom T-mobile ROM and Sprint (Boot.img and modem.bin) and everything was fine but this did not unlock the phone. Then i tried to flash it to D955. The second ROM flashed with no issues and also it did not unlock it. After that i entered TWRP did a full wipe and selected reboot recovery (because the phone had some issues detecting OTG USB). After that my phone did not enter TWRP and shows me a black screen when i try to enter TWRP. Download mode works but i can't flash it to stock because i get CrossDL [D955] to [LS995] error. I tried several DLLs (D959, LS995 and LGUP_8974) but they don't help, i still get CrossDL error in LG Flash Tool. Any ideas ??
Problem solved by editing tot file with winhex.
do you still have the custom rom ?
Related
My friend has accidently formatted the system folder of his LG L90 D410 and now there is no OS installed on the phone. I have installed TWRP and when i tried flashing cm i get an error : executing binary in zip. Is there any way by which i can bring back his phone alive? He was on stock LG Rom and rooted with unlocked bootloader when he got an update notification from LG. He clicked on update and his phone entered into recovery mode and now there's no ROM on the phone. Please Urgent Help Required.
Use this guide: http://forum.xda-developers.com/lg-l90/general/guide-flash-stock-kdz-offline-lg-l90-t2803479
It works on Download Mode, so it will flash without recovery.
I did create another thread, but didn't provide much info in it. Here is more information on my situation, any help is much appreciated.
I was planning to unlock my newly obtained G Flex LS995 for Sprint yesterday. Here was my process
-Used Stump Root w/Bruteforce Mode to Root. No issues, Root worked fine
-Used Freedom Flex to Install TWRP, yet again, no issues. Installed fine.
-Finally got to TWRP, did a restore, and this is where I made one crucial mistake; didn't wipe my system.
-Used the AT&T/Sprint ROM from Post #6 in this forum: http://forum.xda-developers.com/showthread.php?t=2747066
-Successfully installed in recovery, rebooted
Now, my phone is stuck in boot loop (phone flashes LG splash screen, goes blank with LED indicator endlessly blinking). Here is everything I've tried to fix it:
-Access recovery mode via regular method (VOL - and Power) did not work though I did get to Hardware Key Mode a few times through this method
-Access to Hard Reset mode did not work
-Download mode does work
-Tried LG Flash Tool w/Sprint DLL and TOT, AT&T DLL (because this is a AT&T/Sprint ROM I installed, D950 is the model number flash tool believes it is) and Sprint TOT, did not work either way. Nothing on flash tool has worked.
I have more answers if needed, but that's what it's like right now. Won't boot, won't go to recovery, and because of the ROM I used, flash tool won't work over. I've pretty much come to the conclusion I am screwed, but I'd love somebody to prove me wrong, I really don't want this to be the fate... so am I bricked? Please let me know with any help... THANKS!
If you can access download mode you could flash D950 stock tot or 20a kdz. Then root and change build.prop to ls995 and flash stock sprint zv3.
Other process could be flash d950 stock root/twrp and then flash through twrp a stock zip of zv3 you can find it around (think its Dfuse who made this stock zip). Dont worry about cross dl I have done it a thousand times on mine and theres always a way around.
3rd way is to flash with a generic dll and stock zv3 tot.
If you need dll contact me thru PM.
I have same issue, almost. Flashed wrong rom but phone wont stay up long enough for me to edit the build.prop. rom is very unstable, and i cant find a stock rom for the model i flashed. (lg-d9550
Hello, I have a LG G4 T Mobile Variant 10N. I had a custom rom with twrp. Now with Marshmallow being out I wanted to go back to stock to update to MM then get a MM based rom. I did a complete wipe on TWRP OS was removed also. I tried using the LG Flash Tool, Have Installed LG Drivers and am using the correct KDZ. My phone goes into download mode without a problem the problem is my phone always stops at 82% during the flash process then I receive a error in LG Flash Tool saying "Error update cannot be done make sure phone is connected and try again" Iv'e tried several times to flash and it always stops at 82% What can I do? My phone has no OS installed. Only bootloops and download mode are achievable. Can I just flash the Marshmallow KDZ or will that brick my phone? No rude comments please. Ive done this before with no OS also but my phone never got stuck during the flashing process. HELP PLEASE P.S Recovery mode works as well but only the factory reset option is there. Ive tried the factory reset option phone just goes into download mode.
VileTemptation said:
Hello, I have a LG G4 T Mobile Variant 10N. I had a custom rom with twrp. Now with Marshmallow being out I wanted to go back to stock to update to MM then get a MM based rom. I did a complete wipe on TWRP OS was removed also. I tried using the LG Flash Tool, Have Installed LG Drivers and am using the correct KDZ. My phone goes into download mode without a problem the problem is my phone always stops at 82% during the flash process then I receive a error in LG Flash Tool saying "Error update cannot be done make sure phone is connected and try again" Iv'e tried several times to flash and it always stops at 82% What can I do? My phone has no OS installed. Only bootloops and download mode are achievable. Can I just flash the Marshmallow KDZ or will that brick my phone? No rude comments please. Ive done this before with no OS also but my phone never got stuck during the flashing process. HELP PLEASE P.S Recovery mode works as well but only the factory reset option is there. Ive tried the factory reset option phone just goes into download mode.
Click to expand...
Click to collapse
It sounds like you have a corrupted file or you're trying to flash lower than 10n when you've already upgraded to 10N. Did you try to re-download? If you flash 10n or 20i, you can't flash below the 10n.
Rapunzl said:
It sounds like you have a corrupted file or you're trying to flash lower than 10n when you've already upgraded to 10N. Did you try to re-download? If you flash 10n or 20i, you can't flash below the 10n.
Click to expand...
Click to collapse
Thank you. I am not sure what it was but I got it fixed now. I tried it on another computer and it worked now I have updated to Marshmallow.
Few days ago I tried to root Moto X using Kingroot Method. I followed also Steps but when I rebooted my phone, it was booting only in Fastboot an Recovery. I thought it went into bootloops so I was trying to flash TWRP recovery but it gave me error as mentioned in Image 1 (attached). so I went to service center. People over there did something nd told me that partitions are broken so will have to change the motherboard.
I didn't agree with them and again tried to flash TWRP recovery but now m getting different error (Attached - Image 2). nd I think people at service were right.
so my questions are is there any chance to flash anything to device now?? or changing the motherboard is the only option available???
I am able to access only fastboot. nothing other than that not even custom recovery.
You need to flash the recovery while in fastboot and the first image shows that you're in the stock recovery
3nd image shows nothing really, but that you're in fastboot. Try flashing twrp while in fastboot. Plenty of info here.
Thnx for ur reply....Successfully flashed TWRP and ROM....
let me explain everything why have i created this thread.
My phone was only charging when switched off. I was on Lineage OS (by daniel_hk) at that time so i thought it is because of that custom ROM.
I, then, intended to flash stock ROM, this one: https://forum.xda-developers.com/k3-note/development/official-build-lenovo-k3-note-k50a40-6-t3370537
debloated version.
I booted into TWRP recovery (v3.1.1-2 by daniel_hk).
Wiped everything and tried flashing K3 Note S433 Debloated ROM from the link i mentioned above. I received error 7. Now i was stuck without any OS in the phone.
Then I tried to flash other version of twrp (3.1.1-0) in phone using sp flash tool but received another error- "PMT is changed for the ROM! It must be downloaded" :/
I googled and found the solution is format the flash using sp flash tool. I did it and flashed the recovery but my phone went dead completely! No responses at all.
Finally i decided to install the original S433 ROM in K3 Note using SP Flash tool but then i receved another error - "BROM: Error 4008"
Then I tried another version of SP Flash tool, v5.1628 (previously v5.1604), Received the PMT changed error then formatted again then flashed the Original ROM.
Now my phone is Unbricked but still not charging and i have no IMEI also.
Favours/Helps that i want-
1. Main thing i want my phone to charge when it is powered on. Watched this video on youtube https://www.youtube.com/watch?v=N7qtDMu_WTU but I am not able to enter Engineering Mode.
2. I want to install debloated version of this ROM through TWRP and for that i have to flash twrp now but to flash TWRP i will need to format using SP Flash tool first (becuase of error "PMT is Changed in the ROM") and if i do that my phone will be bricked again! If i somehow flashed the recovery then i'll not be able to flash the debloated version of the ROM because of the "Error 7".
3. Want my IMEI back
Any Help will be really appreciated.
And sorry if any similar thread already exists I couldn't find the best solution for me anywhere so i created my own!
dude , first thing to remember;
even if your os is completely gone and recovery option is still working , then don't ever do these stupid things.
I've been in your place . But i always knows that if your recovery is still working then there's 99.9% you can fix it.but it seems like you've ruined everything with other flash tools. Dude , unlike every phones, k3 note has it's own k3 note manager software available in xda forums. You can download twrp backups here . Lenovo stock rom backup was here, only you have to do is download and place it on the correct folder. Then press restore!!!
But you ruined everything. I don't know if it turn on again. You came here after all of this and asking us to help now? I
install a custom rom after installing the stockrom (which got error7 during install)
after u get error7 when installing the firmware,,you wont have any os for the phone to boot.
just flash someother custom rom after u got that error.. phone will boot up.
Please compare whether all files of the stockrom you downloaded are extracted,i got error 7,and when i investigated the reason was that one of the file inside the rar file was not extracted.which inturn caused error during instalation
aK_mr3'ofive said:
let me explain everything why have i created this thread.
My phone was only charging when switched off. I was on Lineage OS (by daniel_hk) at that time so i thought it is because of that custom ROM.
I, then, intended to flash stock ROM, this one: https://forum.xda-developers.com/k3-note/development/official-build-lenovo-k3-note-k50a40-6-t3370537
debloated version.
I booted into TWRP recovery (v3.1.1-2 by daniel_hk).
Wiped everything and tried flashing K3 Note S433 Debloated ROM from the link i mentioned above. I received error 7. Now i was stuck without any OS in the phone.
Then I tried to flash other version of twrp (3.1.1-0) in phone using sp flash tool but received another error- "PMT is changed for the ROM! It must be downloaded" :/
I googled and found the solution is format the flash using sp flash tool. I did it and flashed the recovery but my phone went dead completely! No responses at all.
Finally i decided to install the original S433 ROM in K3 Note using SP Flash tool but then i receved another error - "BROM: Error 4008"
Then I tried another version of SP Flash tool, v5.1628 (previously v5.1604), Received the PMT changed error then formatted again then flashed the Original ROM.
Now my phone is Unbricked but still not charging and i have no IMEI also.
Favours/Helps that i want-
1. Main thing i want my phone to charge when it is powered on. Watched this video on youtube https://www.youtube.com/watch?v=N7qtDMu_WTU but I am not able to enter Engineering Mode.
2. I want to install debloated version of this ROM through TWRP and for that i have to flash twrp now but to flash TWRP i will need to format using SP Flash tool first (becuase of error "PMT is Changed in the ROM") and if i do that my phone will be bricked again! If i somehow flashed the recovery then i'll not be able to flash the debloated version of the ROM because of the "Error 7".
3. Want my IMEI back
Any Help will be really appreciated.
And sorry if any similar thread already exists I couldn't find the best solution for me anywhere so i created my own!
Click to expand...
Click to collapse
i hv facing same issue try every think bt nothing is work thn i hv flash my phone sp flash with original stock rom and when i flash i untk recovery option bcoz in 89 percent i got error than aftr untk it successfully flash and when i start i only show twrp thn i reconnect my phone to pc and untck all in stock rom only tck recovery and successfully flash recover and restart my mobile....... and boom its work nw i very happy
aK_mr3'ofive said:
let me explain everything why have i created this thread.
My phone was only charging when switched off. I was on Lineage OS (by daniel_hk) at that time so i thought it is because of that custom ROM.
I, then, intended to flash stock ROM, this one: https://forum.xda-developers.com/k3-note/development/official-build-lenovo-k3-note-k50a40-6-t3370537
debloated version.
I booted into TWRP recovery (v3.1.1-2 by daniel_hk).
Wiped everything and tried flashing K3 Note S433 Debloated ROM from the link i mentioned above. I received error 7. Now i was stuck without any OS in the phone.
Then I tried to flash other version of twrp (3.1.1-0) in phone using sp flash tool but received another error- "PMT is changed for the ROM! It must be downloaded" :/
I googled and found the solution is format the flash using sp flash tool. I did it and flashed the recovery but my phone went dead completely! No responses at all.
Finally i decided to install the original S433 ROM in K3 Note using SP Flash tool but then i receved another error - "BROM: Error 4008"
Then I tried another version of SP Flash tool, v5.1628 (previously v5.1604), Received the PMT changed error then formatted again then flashed the Original ROM.
Now my phone is Unbricked but still not charging and i have no IMEI also.
Favours/Helps that i want-
1. Main thing i want my phone to charge when it is powered on. Watched this video on youtube https://www.youtube.com/watch?v=N7qtDMu_WTU but I am not able to enter Engineering Mode.
2. I want to install debloated version of this ROM through TWRP and for that i have to flash twrp now but to flash TWRP i will need to format using SP Flash tool first (becuase of error "PMT is Changed in the ROM") and if i do that my phone will be bricked again! If i somehow flashed the recovery then i'll not be able to flash the debloated version of the ROM because of the "Error 7".
3. Want my IMEI back
Any Help will be really appreciated.
And sorry if any similar thread already exists I couldn't find the best solution for me anywhere so i created my own!
Click to expand...
Click to collapse
hows your phone?? alive??