Few days ago I tried to root Moto X using Kingroot Method. I followed also Steps but when I rebooted my phone, it was booting only in Fastboot an Recovery. I thought it went into bootloops so I was trying to flash TWRP recovery but it gave me error as mentioned in Image 1 (attached). so I went to service center. People over there did something nd told me that partitions are broken so will have to change the motherboard.
I didn't agree with them and again tried to flash TWRP recovery but now m getting different error (Attached - Image 2). nd I think people at service were right.
so my questions are is there any chance to flash anything to device now?? or changing the motherboard is the only option available???
I am able to access only fastboot. nothing other than that not even custom recovery.
You need to flash the recovery while in fastboot and the first image shows that you're in the stock recovery
3nd image shows nothing really, but that you're in fastboot. Try flashing twrp while in fastboot. Plenty of info here.
Thnx for ur reply....Successfully flashed TWRP and ROM....
Related
i've unlocked my bootloader,rooted and installed twrp...i did all the required wipes and tried to install the titan rom 1.1.0..i thought the flashing has started but it came up with an error-"error executing updater binary in zip" i tried it the second time and the result was same..now when i tried to boot my phone up..it just hangs at the -"warning unlocked bootloader" screen..the phone isn't switching off and unable to enter the recovery...i can go to the fastboot mode..but when i select recovery..it doesn't go to twrp..it again gets stuck at the boot screen..what can i do now?
Flash stock image
Similar problem in another thread I just posted to. I am having similar problems.
If after flashing stock then flash custom recovery to be able to go into recovery ?
Hello, I need to know what version of firmware you were, I think, will have to increase the bootloader to install again and there TWRP, flash any ROM
ghostzz said:
i've unlocked my bootloader,rooted and installed twrp...i did all the required wipes and tried to install the titan rom 1.1.0..i thought the flashing has started but it came up with an error-"error executing updater binary in zip" i tried it the second time and the result was same..now when i tried to boot my phone up..it just hangs at the -"warning unlocked bootloader" screen..the phone isn't switching off and unable to enter the recovery...i can go to the fastboot mode..but when i select recovery..it doesn't go to twrp..it again gets stuck at the boot screen..what can i do now?
Click to expand...
Click to collapse
Make sure you're using TWRP 2.8.6
Do all your wipes, reboot again into recovery, go to mount and make sure system isn't checked, go to install and try to flash again.
Sent from my XT1064 using Tapatalk
Goodday everyone,
Last year I soft-bricked(stucked at bootloop) my phone and I was trying to get it done. I tried all the method I saw online but none worked until I discovered one method that worked.
THE METHOD
--------------
First of all I downloaded a custom rom(NokDroid v1.1) from xda. I used phil rcovery to install the rom. But after this the Nokia logo just get stuck without it booting fully, only my recovery mode was accessible, I thought to myself since I have changed the ROM, probably it might be that the bootloader image is corrupt so I used a trick to boot into my phone. what I did was this:
1.After somethings I did, I unknowingly made my phone to boot straight to my recovery without me using any button combination and I didn't know what happen to my bootloader
2.Discovery this I renamed a bootloader image I found in NokDroidv1.1 system.zip folder to recovery.img and push the bootloader image into my phone to replace my recovery using fastboot.
In summary, I replaced my recovery With NokDroid bootloader image.
And whoa..... it worked, I boot into my phone but my problem now is that i have no recovery and if i needed it I would have to boot it in back and by doing this I would have no booloader.
So my question is:
*. Has anyone tried this method before.? (Did I invent this method?)
*. Secondly is there anyway I can get my phone to have both bootloader and recovery?
*.Why did my phone boot straight to recovery?
Hello Guys,
Yesterday I tried to root my Moto 2g.
Unlocked it's bootloader,Installed Twrp and installed supersu. Also downloaded a custom mod(the most famous one I guess) and installed it,only to find out that the phone would no longer boot
but keep looping on the unlocked bootloader warning screen.While thinking that I had downloaded a non-compatible mod I Installed another one.After that,booting the phone would Instantly
take me to the recovery mode and keep looping the Teamwin logo.
I decided not to mess anymore with it and reinstall the stock firmware for moto 2g. After Installing it the Motorola logo comes up and then I am taken to the fastboot screen once again with the error saying:
"Fastboot reason,Fell through from boot recovery mode".Tried to flash CWM to see If I could get into recovery mode from there but I would get CWM logo loops exactly the same way they appeared with Teamwin logo.
Seems like phone is dead to me but still have a bit of hope,although the only place I can get is fastboot.
Edit:I tried to fastboot flash boot boot.img the stock image and I got and error saying that boot.img(10mb) exceeded the partition limit
shatterbb said:
Hello Guys,
Yesterday I tried to root my Moto 2g.
Unlocked it's bootloader,Installed Twrp and installed supersu. Also downloaded a custom mod(the most famous one I guess) and installed it,only to find out that the phone would no longer boot
but keep looping on the unlocked bootloader warning screen.While thinking that I had downloaded a non-compatible mod I Installed another one.After that,booting the phone would Instantly
take me to the recovery mode and keep looping the Teamwin logo.
I decided not to mess anymore with it and reinstall the stock firmware for moto 2g. After Installing it the Motorola logo comes up and then I am taken to the fastboot screen once again with the error saying:
"Fastboot reason,Fell through from boot recovery mode".Tried to flash CWM to see If I could get into recovery mode from there but I would get CWM logo loops exactly the same way they appeared with Teamwin logo.
Seems like phone is dead to me but still have a bit of hope,although the only place I can get is fastboot.
Edit:I tried to fastboot flash boot boot.img the stock image and I got and error saying that boot.img(10mb) exceeded the partition limit
Click to expand...
Click to collapse
try flashing the whole Stock Firmware
It might help,
U said u flashed a MOD over stock ROM?
If so, u should have boot first Just After unlocking the bootloader before Flashing any MODs
raj_45 said:
try flashing the whole Stock Firmware
It might help,
U said u flashed a MOD over stock ROM?
If so, u should have boot first Just After unlocking the bootloader before Flashing any MODs
Click to expand...
Click to collapse
I did boot after unlocking and normally flashed whole stock firmware.This morning I woke up and the error message in fastboot is 'boot up failed' for bot normal and recovery mode
shatterbb said:
I did boot after unlocking and normally flashed whole stock firmware.This morning I woke up and the error message in fastboot is 'boot up failed' for bot normal and recovery mode
Click to expand...
Click to collapse
is this your problem
raj_45 said:
is this your problem
Click to expand...
Click to collapse
Ok let me explain the situation better.Last night I used a stock firmware I found and flashed it.When I tried to boot I would see motorola logo once
fore boot mode,Then it would go to recovery so I would see it for a second time and then I would see teamwin logo looping so the phone was not
able to get into recovery mode but only into bootloader.
After That I flashed CWM and the same thing would happen with CWM logo looping now in recovery mode.
Today I woke up and flashed CWM again,and for some reason I could get into CWM and use it normally
So what I did is Installed Supersu and a mod for my xt1068 and tried to boot but phone stuck in the same endless loop again and I also cant get
into CWM again as its logo keeps flashing instead of taking me into the menu.
I believe there is an error with my data folder or partition or w/e.
Most of all I want to be able to get into CWM again
shatterbb said:
Ok let me explain the situation better.Last night I used a stock firmware I found and flashed it.When I tried to boot I would see motorola logo once
fore boot mode,Then it would go to recovery so I would see it for a second time and then I would see teamwin logo looping so the phone was not
able to get into recovery mode but only into boot loader.
After That I flashed CWM and the same thing would happen with CWM logo looping now in recovery mode.
Today I woke up and flashed CWM again,and for some reason I could get into CWM and use it normally
So what I did is Installed Supersu and a mod for my xt1068 and tried to boot but phone stuck in the same endless loop again and I also cant get
into CWM again as its logo keeps flashing instead of taking me into the menu.
I believe there is an error with my data folder or partition or w/e.
Most of all I want to be able to get into CWM again
Click to expand...
Click to collapse
So u are not able to get into Recovery
And u can get to Fast boot Mode?
If yes Flash TWRP latest(3..1.0-0)
Boot into TWRP
Reset or Install any Custom ROM like LiniageOS or AOSP
I think it's the problem with SuperSU?
Which MOD did u install?
raj_45 said:
So u are not able to get into Recovery
And u can get to Fast boot Mode?
If yes Flash TWRP latest(3..1.0-0)
Boot into TWRP
Reset or Install any Custom ROM like LiniageOS or AOSP
I think it's the problem with SuperSU?
Which MOD did u install?
Click to expand...
Click to collapse
Thanks for the replies,I managed to solve the problem and install Cyanogenmod.I guess everything came up to this:
After the first time I installed twrp I decided to wipe my data folder but somehow it was deleted and the partition became raw type which caused
all the bootlooping problems.
Using CWM I was able to get into recovery mode and then I chose to format my data folder and sd card(as ext4 I guess) and the data folder was
recreated.
After that I normally flashed Cyanogenmod and device booted just fine
Hello;
i've got a moto xt1068; suck on bootloader unlocked message
i tried flashing it a few times, with success but it still suck on bootloader.
i flashed twrp but cant boot to it; unless i do:
fastboot boot recovery.img
Thank you.
This was after unlocking boot-loader or flashing custom ROM ?
I remember facing this issue when i rooted device 1st time ...
to resolve this i followed this steps;
1. Unlocked boot-loader
2. Flashed twrp
Now instead of restarting the device, i used to go straight away to recovery ...
mini2015 said:
This was after unlocking boot-loader or flashing custom ROM ?
I remember facing this issue when i rooted device 1st time ...
to resolve this i followed this steps;
1. Unlocked boot-loader
2. Flashed twrp
Now instead of restarting the device, i used to go straight away to recovery ...
Click to expand...
Click to collapse
Nothing changes; it still just stock recovery
i can boot to twrp using the fastboot boot twrp.img
but i get an error 7 installing the zip.
also; i use twrp to connect the phone; delete files from internal storage; but when i reboot i find it there; memory protected somehow? weird.
is there any reason why flashing twrps via ADB would send z5 pro gt into boot loop into bootloader unable to access the custom recovry or phone needing to do emergency flashing via qfil to stock firmware i did previously use trwps on device to flash files and to sign boot to always boot twrps recovery when trying to access recovery mode . (before bootlooping)
affter bootlooping and fixing via qfil i have been unable to successful install trwps if i do it bootloop to bootloader.
whats the difference between "meta" / "flat" options in qfil
tried locked and unlocked bootloader on both 10.5.304 and 11.1.021 also tried to go straight to recovery mode affter twrps flashing on both firmware same thing lead me bootloop needing to qfill to 10.5.30
another question can i qfil flash to 11.1.021 straight away without having having to qfil 10.5.30 then ota updating to 11.1.021..
thanks in advance
leerh said:
is there any reason why flashing twrps via ADB would send z5 pro gt into boot loop into bootloader unable to access the custom recovry or phone needing to do emergency flashing via qfil to stock firmware i did previously use trwps on device to flash files and to sign boot to always boot twrps recovery when trying to access recovery mode . (before bootlooping)
affter bootlooping and fixing via qfil i have been unable to successful install trwps if i do it bootloop to bootloader.
whats the difference between "meta" / "flat" options in qfil
tried locked and unlocked bootloader on both 10.5.304 and 11.1.021 also tried to go straight to recovery mode affter twrps flashing on both firmware same thing lead me bootloop needing to qfill to 10.5.30
another question can i qfil flash to 11.1.021 straight away without having having to qfil 10.5.30 then ota updating to 11.1.021..
thanks in advance
Click to expand...
Click to collapse
Okay ?
The point is ? I must unlock , install twrp and flashing via ota ?
Flash via qfil done and isn't working
My touchscreen still have thats issue
IamRdw said:
Okay
The point is ? I must unlock , install twrp and flashing via ota ?
Flash via qfil done and isn't working
My touchscreen still have thats issue
Click to expand...
Click to collapse
if you want OTA(over the air) updates you need to lock bootloader. otherwise the updater will say something like phone has been rooted and they cant provide you an update
https://forum.xda-developers.com/z5-pro-gt/how-to/installing-ota-update-11-5-141-via-twrp-t4050027
http://anago.2ch.sc/test/read.cgi/sm...ne/1577014188/ theres a lot of information on this link here are some highlights for me
_____________________________________
>> Crash dump loop of 113 ROM burnt Z5PROGT can be restored by burning CNROM for the time being,
Even if I tried it again, it was useless, so if I look at the syntax at the time of batch execution, it seems that vbmeta.img is not burned.
It says unrecognised option `--disable-verification '.
This time, the boot loader loop only started, and TWRP couldn't start.
This time it may be packed
__________________________________________
>> 117
I'm sorry I want to confirm.
Where did you use the fastboot command?
①fastboot --disable-verification flash vbmeta vbmeta.img
②fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
It is ① that I instructed, but it looks like there are two kinds when I check it on the net.
He seemed to have hit it without knowing it.
Excuse me, can you hit both again?
________________________________________
>> 150
>> I burned 113 ZUI11 version Gro ROM.
I re-added TWRP, but when I started it, it was usable normally, so I could add Magisk,
After that, it only seems to be unavoidable that it only starts up in normal recovery mode.
It is troublesome to do it every time you want to use TWRP, but it can't be helped.
__________________________________________________ _______
this helped Solved