Database Develop

[Q] My note is Stuck on Galaxy Note GT-N7000 on boot

Hi guys ,
i just bought a galaxy note and i was able to root it and install rocket rom fairly easy. But for some reason it shutted down , and now i can only see the Samsung Galaxy Note Gt-N7000 boot , it doesnt go any further ,
I've looked about everywhere for a solution , i can go into CWM make backups install zips but it doesnt help ,
I'm able to go thru odin downloading mode and using odin pc i can connect to my note as well , my cell phone finish with kk3 so i tried to reinstall thru odin
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKK3_N7000ODDKK1_N7000DDKJ3_HOME.tar.md5 is valid.
<OSM> MODEM_N7000XXKJ6_REV_05_CL1070146.tar.md5 is valid.
<OSM> GT-N7000-MULTI-CSC-OZSKK1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005> factoryfs.img
<ID:0/005> hidden.img
<ID:0/005> modem.bin
<ID:0/005> param.lfs
<ID:0/005> Sbl.bin
<ID:0/005> zImage
<ID:0/005> modem.bin
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response form LOKE
<ID:0/005> cache.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
it says it succeeded but im still stuck at the boot logo
Anyone could help on this ? would be awesome
, i might have bricked my phone i guess

clear cache, clear dalvic cache, if not works,Wipe Data(you will lose data)

Balbaroth said:
Hi guys ,
i just bought a galaxy note and i was able to root it and install rocket rom fairly easy. But for some reason it shutted down , and now i can only see the Samsung Galaxy Note Gt-N7000 boot , it doesnt go any further ,
I've looked about everywhere for a solution , i can go into CWM make backups install zips but it doesnt help ,
I'm able to go thru odin downloading mode and using odin pc i can connect to my note as well , my cell phone finish with kk3 so i tried to reinstall thru odin
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKK3_N7000ODDKK1_N7000DDKJ3_HOME.tar.md5 is valid.
<OSM> MODEM_N7000XXKJ6_REV_05_CL1070146.tar.md5 is valid.
<OSM> GT-N7000-MULTI-CSC-OZSKK1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005> factoryfs.img
<ID:0/005> hidden.img
<ID:0/005> modem.bin
<ID:0/005> param.lfs
<ID:0/005> Sbl.bin
<ID:0/005> zImage
<ID:0/005> modem.bin
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response form LOKE
<ID:0/005> cache.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
it says it succeeded but im still stuck at the boot logo
Anyone could help on this ? would be awesome
, i might have bricked my phone i guess
Click to expand...
Click to collapse
Same thing happen me too, i was flashing KL3 from CM9 build, even if flash through PC odin also i got Samsung screen boot loop. then i did clean wipe, everything went fine after wipe.

dr.ketan said:
clear cache, clear dalvic cache, if not works,Wipe Data(you will lose data)
Click to expand...
Click to collapse
did cleared the cache ,
and the dalvic cache ( which says no such files or directory )
after i tried the wipe data , still no success...
im stuck on Samsung Galaxy note GT-N7000 logo ,
is there any particular order you have to do to restore ?
Ranjan : i dont think my note boot loop as ive experienced on rocket rom a few times hehe , its just stuck at the black screen with the white Samsung Galaxy note GT-N7000 written on it when i power up
or if im too dumb to solve this , i would send it to repairs but cant find any place nearby , you guys know a place that do that kind of stuff ?
i appreciate the help thanks guys

You shud try to reflash it
Sent from my GT-N7000 using xda premium

dr.ketan said:
You shud try to reflash it
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
you mean reflash using odin ?
when i use odin it download well it says no errors and reboot but still stuck , unless there is others ways beside odin
also i wanted to say when my root and cmw went fine i did a back up on it and it worked before , each time i try to restore it in the end at the data it says :
.android_secure.img not found and its bypassing that part
but says its done after , but doesnt boot too

Pull out the battery and replace after 10 seconds, then try flashing different ROM using PC Odin. while flashing do not Tick Re-partition and do not attach pit file.

If he is flashing another ROM with PC Odin his counter will raise up and the yellow triangle will show up.
It can only be removed with a JIG.

SpecialStar said:
If he is flashing another ROM with PC Odin his counter will raise up and the yellow triangle will show up.
It can only be removed with a JIG.
Click to expand...
Click to collapse
You Should be more specific
Flashing ANY Stock ROM with PC odin, don't raise counter.
Your reply shud be flashing custom ROM with PC odin counter will raise.
not ANOTHER

Right, sorry forget to mention
So he should just flash a STOCK ROM with Odin

thanks for the support guys ,
ive been trying a few things ,
first of all am i using the right rom for this , mine cell finish with kk3 so im using this rom N7000XXKK3_N7000ODDKK1_N7000DDKJ3_HOME.tar should be good right?
i did remove the battery 10 seconds and put it back and tried to install this rom with odin , it does look like its doing something i can see the blue bar going right all the way til a reboot
still stuck at black screen samsung GT-n7000 black logo
should i use a different tar file ?
im so out of idea i think my note is in a state i cannot repair

Balbaroth said:
thanks for the support guys ,
ive been trying a few things ,
first of all am i using the right rom for this , mine cell finish with kk3 so im using this rom N7000XXKK3_N7000ODDKK1_N7000DDKJ3_HOME.tar should be good right?
i did remove the battery 10 seconds and put it back and tried to install this rom with odin , it does look like its doing something i can see the blue bar going right all the way til a reboot
still stuck at black screen samsung GT-n7000 black logo
should i use a different tar file ?
im so out of idea i think my note is in a state i cannot repair
Click to expand...
Click to collapse
in odin , can you see "successful=1, fail=0 " in end of progress details after reboot??
I Guess there is a problem with your Device. Now just boot into Download mode and check what is in the binary counter.. it should be
PRODUCT NAME: GT-N7000
CUSTOM BINARY DOWNLOAD : NO
CURRENT BINARY : SAMSUNG OFFICIAL
if so goto Service center.

ranjan.alva said:
in odin , can you see "successful=1, fail=0 " in end of progress details after reboot??
I Guess there is a problem with your Device. Now just boot into Download mode and check what is in the binary counter.. it should be
PRODUCT NAME: GT-N7000
CUSTOM BINARY DOWNLOAD : NO
CURRENT BINARY : SAMSUNG OFFICIAL
if so goto Service center.
Click to expand...
Click to collapse
when im in Odin pc it always successful=1 fail = 0 when i flash the rom
in download mode it says :
Odin Mode
Product name : GT-N7000
Custom Binary download : No
Current Binary : Samsung Official
when you mean service center you mean to go repair it ? if you know a place please tell me ill ship to them right away lol
you know whats funny i just bought it from expansys.ca 3 days ago and its already in trouble , i guess i might have done something , i enjoyed my 3 days with the note its such a badass phone

Balbaroth said:
when im in Odin pc it always successful=1 fail = 0 when i flash the rom
in download mode it says :
Odin Mode
Product name : GT-N7000
Custom Binary download : No
Current Binary : Samsung Official
when you mean service center you mean to go repair it ? if you know a place please tell me ill ship to them right away lol
you know whats funny i just bought it from expansys.ca 3 days ago and its already in trouble , i guess i might have done something , i enjoyed my 3 days with the note its such a badass phone
Click to expand...
Click to collapse
Did you flash all three files (CODE,MODEM,CSC) ?? or just a one file. ??
did you install any custom ROM on it??

ranjan.alva said:
Did you flash all three files (CODE,MODEM,CSC) ?? or just a one file. ??
Click to expand...
Click to collapse
flashed one file N7000XXKK9_N7000OXAKK9_DBT\N7000XXKK9_N7000OXAKK9_N7000XXKK5_HOME.tar.md5 (the tar) with the PDA and selected start and it went well in theory

Balbaroth said:
flashed one file N7000XXKK9_N7000OXAKK9_DBT\N7000XXKK9_N7000OXAKK9_N7000XXKK5_HOME.tar.md5 (the tar) with the PDA and selected start and it went well in theory
Click to expand...
Click to collapse
Try LA3, it contains all three files(PDA,MODEM,CSC) ll hope for the best.
Good luck

ranjan.alva said:
Try LA3, it contains all three files(PDA,MODEM,CSC) ll hope for the best.
Good luck
Click to expand...
Click to collapse
ok will try LA3 ,
we are talking about this one right ?
N7000XXLA3 --------2.3.6------- 2012 January---N7000OXALA3--------------------Open Europe-----------------------
i found it using Dr.ketan signature
( huge thanks for the tutorial and the quick access to note roms )
im crossing my fingers and will keep you updated
, if by any chance it doesnt work ,and that i have to fix it , can you tell me where they service notes , in canada montreal its not even out yet lol

i had this and i got mine working again by going into download mode and flashing a stock LA4 rom via odin

Richy99 said:
i had this and i got mine working again by going into download mode and flashing a stock LA4 rom via odin
Click to expand...
Click to collapse
okay i flashed the la3 rom and still stuck lol darn ill try la4 then ,
it succeeded in odin pc and on the phone still says samsung official
im really out of options i guess , unreal im beginging to think it has others issues
is this place reliable for repairs ? http://repair-my-device.com or any other suggestions i cant find nothing beside that
EDIT : okay i tried the LA4 still doesnt boot up and stuck on the black screen with the samsung galaxy note gt-n7000 unless i go to cwm or download mode odin i cant do anything else ,
i was reading stuff and i was wondering if i jig could help ?

Was on a completely rooted Midnote.
wanted to try rocketrom ics. So went to recovery and flashed v 1.4, did a complete wipe before and after, but after that, the recovery module became unresponsive, so I force rebooted and the phone was stuck on boot screen "Samsung Galaxy Note 7000".
So I used PC odin and tried to flash the KL3 ROM but was stuck at factoryfs.img. Tried LA5 too, but same situation. Kindly help.
I am from Pune, India.

''firmware encountered an issue'' for galaxy note

Hi everyone
My phone is ''firmware encountered an issue'' i searhing this Thread but i cant do it. Cuz i try everything.
My problem is ODIN always FAIL always
I remove drivers and no kies. I try 6 different offical roms but no different.
So, What did I do?
I use
JB leak
RocketRom JB
RocketRom v12 ICS
I use offical firmware
OJVKL1
XXLRK - N7000VD2LR1
XXLRK
My complaining is This roms is so slow i hate it. Maybe my phone is slow but it's impossible.
HARDRESET-UPDATA-ALLWIPE but always slowly. Firsday everything is good but second day is so laggy. And i think maybe i need a old rom.
GB
So i' download XXLA4 and install. Everything is great but when i XXLA4 root everything messed up.
This is root ''CF-Root-SGN_XX_OXA_LA4-v5.0-CWM5''
and my phone is ''firmware encountered an issue'' and i think back is good ill try XXLRK again but i install mistakenly i select ''N7000_16GB_Q1_20110914-stock.pit'' file and my phone is sleeping now.
So i enter the download mode... Download mode is normal and when i install'a Kernel_JellyBeer_v3.1_STD_CWM_Flashable.zip
I see recovery menu i'll full wipe and back to instaling odin say again FAIL FAIL FAIL...
Please Help me Thank you so much
PEACE

orcunpakten said:
Hi everyone
My phone is ''firmware encountered an issue'' i searhing this Thread but i cant do it. Cuz i try everything.
My problem is ODIN always FAIL always
I remove drivers and no kies. I try 6 different offical roms but no different.
So, What did I do?
I use
JB leak
RocketRom JB
RocketRom v12 ICS
I use offical firmware
OJVKL1
XXLRK - N7000VD2LR1
XXLRK
My complaining is This roms is so slow i hate it. Maybe my phone is slow but it's impossible.
HARDRESET-UPDATA-ALLWIPE but always slowly. Firsday everything is good but second day is so laggy. And i think maybe i need a old rom.
GB
So i' download XXLA4 and install. Everything is great but when i XXLA4 root everything messed up.
This is root ''CF-Root-SGN_XX_OXA_LA4-v5.0-CWM5''
and my phone is ''firmware encountered an issue'' and i think back is good ill try XXLRK again but i install mistakenly i select ''N7000_16GB_Q1_20110914-stock.pit'' file and my phone is sleeping now.
So i enter the download mode... Download mode is normal and when i install'a Kernel_JellyBeer_v3.1_STD_CWM_Flashable.zip
I see recovery menu i'll full wipe and back to instaling odin say again FAIL FAIL FAIL...
Please Help me Thank you so much
PEACE
Click to expand...
Click to collapse
Did you do any full wipes on ics? Where is odin failing, is it factory fs?
Sent from my GT-N7000 using xda premium

happened to me too..
That "firmware encountered an issue" is an indication that the system is corrupted to the point that it cant manage to startup..
I got that problem because of my stupidity.. Plugged my phone to the defective USB port and when I started flashing, I accidentally moved the cable and BAM! Phone is disconnected, and flash failed bigtime..
Your only fix for that if you ask me is do another flash... Try pulling out the battery for 10mins and try to boot into download mode.. That's how i was able to recover my phone from that screen..
I remember that message offering to run emergency recovery using Kies but it is totally useless.. trust me..
Make sure you're plugging in your phone to the USB port DIRECTLY on the motherboard of the computer (the ports at the back) not the ports on the front panel of the case of your computer..
If you're still encountering problems, I believe youre looking at a bricked device and seek more advanced assitance from people here..

SpyderTracks said:
Did you do any full wipes on ics? Where is odin failing, is it factory fs?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
usually factory fail.
i did every time fullwipe

Sounds like superbrick, but try flashing stock gb with pc Odin.
Sent from my GT-N7000 using xda premium

<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLRQ_N7000DBTLRQ_N7000XXLRK_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Yep, that's superbricked. You can either repartition the emmc chip, you'll lose about 3gb of internal sd card and won't be able to run stock roms.
If you have warranty get a reply placement, just say you were updating through Kies when this happened.
Sent from my GT-N7000 using xda premium

SpyderTracks said:
Yep, that's superbricked. You can either repartition the emmc chip, you'll lose about 3gb of internal sd card and won't be able to run stock roms.
If you have warranty get a reply placement, just say you were updating through Kies when this happened.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
But i can get download mode and if i install odin ''AbyssNotekernel42CWTouchOriginalLogo'' i get recovery mode...

just once try to remove the battery for a few seconds and put the phone in download mode and flash the rom again or use a GB rom..

nokiamodeln91 said:
just once try to remove the battery for a few seconds and put the phone in download mode and flash the rom again or use a GB rom..
Click to expand...
Click to collapse
i try another laptop now... Cuz i remember what i do.
My last rom is stock XXLRK rom. And i tired slowly
i try everything HARDRESET-UPDATA-ALLWIPE but always slowly. And i think maybe i need a GB rom.
and i download XXLA4 everything is good and when i try root XXLA4.
this file: 'CF-Root-SGN_XX_OXA_LA4-v5.0-CWM5'' stock phone.
Every time i install this way.
Wipe Data/Factory Reset
Wipe Cache Partition
Format/cache
Format/system
Format/data
Wipe Dalvik Cache
Wipe Battery Stats
Fix Permissions
This way always be good for me cuz i try this way 100 times.
I use Odin 1.85 and i use everytime u1_02_20110310_emmc_EXT4.pit (NO-RE-PARTITION)
So i think my fault is mistakenly last time i select ''N7000_16GB_Q1_20110914-stock.pit'' instal a ''CF-Root-SGN_XX_OXA_LA4-v5.0-CWM5''

I'm tired for try.
I try another pc but result is the same. FAIL FAIL FAIL
N7000XXLA4_N7000OJVKL1_N7000XXLA4_HOME.tar
N7000XXLRL_N7000XXLRK_N7000VD2LR1_HOME.tar
N7000XXLRQ_N7000DBTLRQ_N7000XXLRK_HOME.tar
N7000XXLRT_N7000DBTLRT_N7000XXLRK_HOME.tar
N7000XXLRI_N7000OJVLR3_N7000XXLRB_HOME.tar
I'm like a sammy's storage... I try this roms but result is the same.
Where did i wrong? problem is kernel?rom?pit file? ((

where did it fail?

nokiamodeln91 said:
where did it fail?
Click to expand...
Click to collapse
Odin Fail. I think factoryfs.img fail...
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLRQ_N7000DBTLRQ_N7000XXLRK_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Why now is the wrong? Thing I did always right way

Done dude.. u r good to go now

Problem is solved
Thank you so much ''nokiamodeln91''

dont do any wipes as of now.. u on ICS and an unsafe kernel
dont forget the thanks button

How did you rectify this nokiamodeln91?
Sent from my GT-N7000 using xda premium

OP used an incorrect file with the PIT16GB file.. i just corrected the mistake

nokiamodeln91 said:
OP used an incorrect file with the PIT16GB file.. i just corrected the mistake
Click to expand...
Click to collapse
Nice man, well done.
Sent from my GT-N7000 using xda premium

nokiamodeln91 said:
OP used an incorrect file with the PIT16GB file.. i just corrected the mistake
Click to expand...
Click to collapse
Where can I get a copy of this PIT file? My phone is bricked and am only able to get into download mode and not recovery mode.

[Q] how can I repair wrong installed KERNEL on GT-I9220 - Help please!

Hi Folks,
please bare with me I am a total new comer in this forum and new on Android because of my new Phone:
Samsung Galaxy Note GT-I9220 Chinese Version (but no fake it has Android 4.0.4 and was bought from amazon)
I accidentially installed the franco.Kernel .... don't aks me why.... and since then I am in big troubles :crying:
I can not get a USB Connection to my Win7x64 PC anymore (MTP driver installation fails.... anything I tried did not work)
Eventhough Odin does see my phone but after clicking START if shows me FAILED (Odin 1.85 nor 1.87 works) ... and the phone does seems to do anything (not turn black ... as decsribe in the following threat: http://forum.xda-developers.com/showthread.php?t=1660012 )
So how do I get back to a "normal" Kernel and which file can I use?
Thanks a lot for looking into this.
Le_Tifou:
cowboy:
PS:
All this issues only have come up, because I actually only tried to get full access to all GOOGLE PLAY STORE apps, but google always (90% of all apps) tells me this is incompatible with your phone ... and under [+] sometime says it can not be delivered to your country China or so...

Are you putting the phone in download mode when you connect to odin? If yes then paste the odin logs.

here the ODIN log for 1.87 but same for 1.85
nokiamodeln91 said:
Are you putting the phone in download mode when you connect to odin? If yes then paste the odin logs.
Click to expand...
Click to collapse
Thanks for having a look into this.
So Windows recognizes the following drivers if it is in Download mode
SAMSUNG Mobile USB CDC Composite Device
SAMSUNG Mobile USB Modem
And ODIN 1.87 recognizes the device under ID:COM yellow 0:[com3]
<ID:0/003> Added!!
after START PIT and Bootloader
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The Phone does not do anything. :crying:
I assume that the wrong KERNEL is causing this missbehaviour!?
what to do now? Any idea?
Thx 1000times
So how do I first get a new fitting Kernel?

Le_Tifou said:
Hi Folks,
please bare with me I am a total new comer in this forum and new on Android because of my new Phone:
Samsung Galaxy Note GT-I9220 Chinese Version (but no fake it has Android 4.0.4 and was bought from amazon)
I accidentially installed the franco.Kernel .... don't aks me why.... and since then I am in big troubles :crying:
I can not get a USB Connection to my Win7x64 PC anymore (MTP driver installation fails.... anything I tried did not work)
Eventhough Odin does see my phone but after clicking START if shows me FAILED (Odin 1.85 nor 1.87 works) ... and the phone does seems to do anything (not turn black ... as decsribe in the following threat: http://forum.xda-developers.com/showthread.php?t=1660012 )
So how do I get back to a "normal" Kernel and which file can I use?
Thanks a lot for looking into this.
Le_Tifou:
cowboy:
PS:
All this issues only have come up, because I actually only tried to get full access to all GOOGLE PLAY STORE apps, but google always (90% of all apps) tells me this is incompatible with your phone ... and under [+] sometime says it can not be delivered to your country China or so...
Click to expand...
Click to collapse
You would better restock your note.
You will need a rom with four files: .pit , .pda, modem and csc
The rom MUST be made for your phone and you may find it in samfirmware.com.
If your phone can't enter dowload mode, you'll need a USB JIG.
Hope this can help.
After reading the Odin resulst, try to flash only PDA as your error is comming from the PIT file.
Uncheck "repartition"

First get a kernel for your phone in tar.md5, and flash it by selecting it in the PDA tab. Don't use PIT for now.
---------- Post added at 03:12 PM ---------- Previous post was at 03:10 PM ----------
Phone has to be in download mode to use odin

Is that the right file: 165512339/c6b85b4/I9220ZCLPL_I9220OZHLPL_CHN.zip ??
nokiamodeln91 said:
First get a kernel for your phone in tar.md5, and flash it by selecting it in the PDA tab. Don't use PIT for now.
---------- Post added at 03:12 PM ---------- Previous post was at 03:10 PM ----------
Phone has to be in download mode to use odin
Click to expand...
Click to collapse
Thanks for your adive.
How do I get the right kernel files I have no glue for what I should search for....
Ok I found recently this threat which seams to point to the origínal chinese android versions:
droidevelopers dot com/f479/11859-samsung-galaxy-note-i9220-china-firmware-list.html
which points to the following
CHINA I9220 Ice Cream Sandwich 4.0.4 Firmwares
Download PDA Version Release Date CSC version Country / Carrier
Link I9220ZCLPL 4.0.4 2012 July I9220OZHLPL China
from hotfile DOT com/dl/165512339/c6b85b4/I9220ZCLPL_I9220OZHLPL_CHN.zip =606MB
Is that the right stuff? I am just downloading it.
Thx

Even if you get a whole rom, it's good. Flash with odin without the pit

Le_Tifou said:
Thanks for your adive.
How do I get the right kernel files I have no glue for what I should search for....
Ok I found recently this threat which seams to point to the origínal chinese android versions:
droidevelopers dot com/f479/11859-samsung-galaxy-note-i9220-china-firmware-list.html
which points to the following
CHINA I9220 Ice Cream Sandwich 4.0.4 Firmwares
Download PDA Version Release Date CSC version Country / Carrier
Link I9220ZCLPL 4.0.4 2012 July I9220OZHLPL China
from hotfile DOT com/dl/165512339/c6b85b4/I9220ZCLPL_I9220OZHLPL_CHN.zip =606MB
Is that the right stuff? I am just downloading it.
Thx
Click to expand...
Click to collapse
Yes, should be fine, it's made for GT-I9220. Just flash PDA.:good:

Thanks KERNEL has been changed back to original
lionelia said:
Yes, should be fine, it's made for GT-I9220. Just flash PDA.:good:
Click to expand...
Click to collapse
Thanks both of you!!!
Odin 1.87 worked so far. And immediately Windows recognized the phone as GT-I9220 again.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9220ZCLPL_I9220ZCLPI_I9220OZHLPL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Sbl.bin
<ID:0/003> param.lfs
<ID:0/003> factoryfs.img
<ID:0/003> zImage
<ID:0/003> hidden.img
<ID:0/003> cache.img
<ID:0/003> modem.bin
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
I got after disconneting and taking out battery and restart -
got into mode VOL-up + power-on + center key
and made a factory reset as well as deleted cache
Modell: GT-I9220
Android version: 4.0.4
Baseband: I9220ZCLPI
KERNEL: 3.0.15 - ...
Build: IMM76D.ZCLPL
When I unpacked the ZIP file there was an additioal file ss_DL.dll what shall I do with it?
now it works thanks to you!
Great!

Nothing to do with the the dll file. Congrats for a working phone.

Rooting failure
nokiamodeln91 said:
Nothing to do with the the dll file. Congrats for a working phone.
Click to expand...
Click to collapse
Please help,
I was trying to root my Samsung galaxy note gt-i9220, I followed the video instructions from rootgalaxynote.com, I used the CWM.Zip, CWM-supers-v0.87.zip and after I installed the franco kernel-r5.zip
PROBLEM: after installing the franco kernel when I restarted the system my note comes on and shows Galaxy Note GT-I9220 and after that I have a black screen.
What can I do to get back the original state, it seems I can not handle rooting it. However it can get to the download mode when I place the volume up+power+home burton.
NB: I did not use a computer while doing this neither did I backup any thing

[Q] PingPong Root -> TWRP -> Brick! :( Help!

TL;DR DON'T try to install a custom recovery yet. As of 5/12/15, the bootloader prevents you from doing that. At the moment, you can only root, which you can do through Ping Pong Root (google it). And if for some reason you goofed up and installed a custom recovery, go to AT&T and just say the bare minimum, that you "tried to update your phone" and it keeps telling you "this error message." If they prod more, you can say you "updated the firmware," but obviously withhold the words "flash," "recovery," etc.
So I greatly REGRET that I installed a custom recovery. I'd appreciate any help. I'm bricked in the "System software not authorized by AT&T has been found on your phone." Here's what I did leading up to it:
1. Installed Ping Pong Root party_beta5.7z. Unzipped, installed, rooted.
2. Root Checker verified root!
3. Determined my my phone is: G920AUCU1AOCE.
4. Downloaded TWRP 2.8.6.2 through Flashify for Samsung Galaxy S6 (zeroflte).
5. Flashed it through Flashify
6. Bricked (light blue screen with text) and bootloop.
Help!
EDIT: Steps I've taken so far:
1. Download Odin Tar files from http://forum.xda-developers.com/att-...g920a-t3103835
2. Connected phone to PC in download mode after installing USB drivers and ODIN 3.10.6
3. Put all 4 tar files into their corresponding spots.
EDIT2: No luck. Tried multiple ports, multiple computers, and used the official cable. Also Ran as administrator. After making sure my device is recognized as COM3 (blue box), and the tar files are plugged in, I keep getting the below error:
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
EDIT3: Played dumb, took it to at&t store with a tech support center, and they re-flashed a clean install for me. Whew.

I don't think u can use custom recoveries yet buddy..

Yeah, I goofed bigtime. I'm really regretting it.

It's telling me this:
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Let it be known root does not equel unlocked bootloader. I'd of wait or am for something like safestra to make it's way over.

aznkenshin said:
I'd appreciate any help. I'm bricked in the "System software not authorized by AT&T has been found on your phone." Here's what I did leading up to it:
1. Installed Ping Pong Root party_beta5.7z. Unzipped, installed, rooted.
2. Root Checker verified root!
3. Determined my my phone is: G920AUCU1AOCE.
4. Downloaded TWRP 2.8.6.2 through Flashify for Samsung Galaxy S6 (zeroflte).
5. Flashed it through Flashify
6. Bricked (light blue screen with text) and bootloop.
Help!
EDIT: Steps I've taken so far:
1. Download Odin Tar files from http://forum.xda-developers.com/att-...g920a-t3103835
2. Connected phone to PC in download mode after installing USB drivers and ODIN 3.10.6
3. Put Firmware into AP.
Praying this will work...
EDIT2: No luck. It tells me "Can't open the serial(COM) port." I'm thinking it's the drivers fault? Looking into it...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2711451
download odin 3.10.6 and just use all the tar files....MINE IS FINALLY ALIVE

plaxy+ said:
Let it be known root does not equel unlocked bootloader. I'd of wait or am for something like safestra to make it's way over.
Click to expand...
Click to collapse
So in the meantime, what should I do to at least have an operable phone? (

skylinegtr116 said:
http://forum.xda-developers.com/showthread.php?t=2711451
download odin 3.10.6 and just use all the tar files....MINE IS FINALLY ALIVE
Click to expand...
Click to collapse
OH! I was only using the "AP_****" files. I should plug in the CSC, CP, and BL too???????

aznkenshin said:
oh! I was only using the "ap_****" files. I should plug in the csc, cp, and bl too???????
Click to expand...
Click to collapse
yes all the files

skylinegtr116 said:
yes all the files
Click to expand...
Click to collapse
No luck
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_G920AUCU1AOCE_CL4351102_QB4488924_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_G920AUCU1AOCE_CL4351102_QB4488924_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_G920AUCU1AOCE_CL4351102_QB4488924_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_G920AATT1AOCE_CL4351102_QB4488924_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

The link above is broken, where can I get these files?
PS: Why do they provide a custom recovery if it straight "bricks" your phone? How is that even considered a working release and why don't they (TWRP) post a damn warning about it?

plaxy+ said:
Let it be known root does not equel unlocked bootloader.
Click to expand...
Click to collapse
Just joined last month, this was their third post currently, and knew this :good:
OP joined late 2011 and thought that just by gaining root, we could install custom recoveries on a still locked bootloader...........
LEARN FROM THIS, people! Don't want to go through this? Follow instructions!
That being said, from what I know of soft bricks, you are doing the right steps to fix it, I just don't have any experience with them to be able to tell you what you're doing wrong. People who have unlocked bootloader phones and installed custom recoveries, tripping KNOX, were able to flash back to stock and get KNOX back to 0x0, but again, they have the unlocked bootloader to be able to do that.... don't know what else to tell you other than to bring it to an ATT service center, play dumb, and see if they'll swap you into a new one
hayateyoshida said:
The link above is broken, where can I get these files?
PS: Why do they provide a custom recovery if it straight "bricks" your phone? How is that even considered a working release and why don't they (TWRP) post a damn warning about it?
Click to expand...
Click to collapse
They do post a warning about it - they post what phones this IS for, and our phone is NOT listed! People, please learn how to read if you're going to screw around with your phones! You can't just say "I have an S6 Edge" and think they're all the same! TWRP clearly states the following two devices have recoveries available:
Samsung Galaxy S6 (zeroflte)
Samsung Galaxy S6 (Sprint) (zerofltespr)
Do you see zeroflteatt on that list? Do you think zeroflte = zeroflteatt? If you don't know what model phone you have and flash away, you're gonna have a bad day......

aznkenshin said:
So I greatly REGRET that I installed a custom recovery. I'd appreciate any help. I'm bricked in the "System software not authorized by AT&T has been found on your phone." Here's what I did leading up to it:
1. Installed Ping Pong Root party_beta5.7z. Unzipped, installed, rooted.
2. Root Checker verified root!
)
Click to expand...
Click to collapse
what??
ATT galaxy s6 has root ?

Have you tried recovery through smart switch
Sent from my SAMSUNG-SM-G925A using XDA Free mobile app

netnerd said:
what??
ATT galaxy s6 has root ?
Click to expand...
Click to collapse
yep. pingpong root

LeKtRiCzzz said:
Have you tried recovery through smart switch
Sent from my SAMSUNG-SM-G925A using XDA Free mobile app
Click to expand...
Click to collapse
Yes, after going to update and software emergency setup, I plugged in Model and Serial number on the sticker of my phone, and it auto-closes.
Sent from my GT-I9505G using XDA Free mobile app

Agree 500%
KryptosXLayer2 said:
Just joined last month, this was their third post currently, and knew this :good:
OP joined late 2011 and thought that just by gaining root, we could install custom recoveries on a still locked bootloader...........
LEARN FROM THIS, people! Don't want to go through this? Follow instructions!
That being said, from what I know of soft bricks, you are doing the right steps to fix it, I just don't have any experience with them to be able to tell you what you're doing wrong. People who have unlocked bootloader phones and installed custom recoveries, tripping KNOX, were able to flash back to stock and get KNOX back to 0x0, but again, they have the unlocked bootloader to be able to do that.... don't know what else to tell you other than to bring it to an ATT service center, play dumb, and see if they'll swap you into a new one
They do post a warning about it - they post what phones this IS for, and our phone is NOT listed! People, please learn how to read if you're going to screw around with your phones! You can't just say "I have an S6 Edge" and think they're all the same! TWRP clearly states the following two devices have recoveries available:
Samsung Galaxy S6 (zeroflte)
Samsung Galaxy S6 (Sprint) (zerofltespr)
Do you see zeroflteatt on that list? Do you think zeroflte = zeroflteatt? If you don't know what model phone you have and flash away, you're gonna have a bad day......
Click to expand...
Click to collapse
---------- Post added at 11:25 AM ---------- Previous post was at 11:24 AM ----------
Smart Switch does NOT work in the AT&T version of the S6.
LeKtRiCzzz said:
Have you tried recovery through smart switch
Sent from my SAMSUNG-SM-G925A using XDA Free mobile app
Click to expand...
Click to collapse

aznkenshin said:
EDIT3: Played dumb, took it to at&t store with a tech support center, and they re-flashed a clean install for me. Whew.
Click to expand...
Click to collapse
Great, I have just booked an appointment. But buddy, is it possible for you to upload Odin Tar?
Thanks!

nagnrik said:
Great, I have just booked an appointment. But buddy, is it possible for you to upload Odin Tar?
Thanks!
Click to expand...
Click to collapse
Read my OP

aznkenshin said:
Read my OP
Click to expand...
Click to collapse
ATT re-flashed the firmware, it is fine now. Thanks!

Help! Phone bricked, Odin will not see S6

I have a Tmobile S6 and not sure wife clicked to update super user and now phone will not go past tmobile splash screen. I now have the phone in download mode and Odin 3.09 or 3.11 will not see it. I haev tried different ports, uninstalling and reinstalling Kies and samsung drivers and different usb ports. also tried a win 7 pc since this one is win 10.
Odin will never see com port. Any ideas?

I was finally able to get it to see the phone but then go this message
<ID:0/007> Added!!
<ID:0/007> Removed!!
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1101)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Anyone?

Did u get it figured out?
Sent from my SM-G920T using XDA-Developers mobile app

No I did not, I am still fighting it. I cannot get it write the rom with Odin. I really need some help.

I am not at home so cannot verify which version of Odin I use. Have you tried flashing the EPF1 baseband version tar file or which file are you trying to flash in Odin?
Sent from my SM-G920T using XDA-Developers mobile app

Have you tried smart switch?

the file is G925TUVU1AOCG_G925TTMB1AOCG_G925TUVU1AOCG_HOME.tar I cannot find the link I downloaded from , sorry

MukDroid said:
I have a Tmobile S6 and not sure wife clicked to update super user and now phone will not go past tmobile splash screen. I now have the phone in download mode and Odin 3.09 or 3.11 will not see it. I haev tried different ports, uninstalling and reinstalling Kies and samsung drivers and different usb ports. also tried a win 7 pc since this one is win 10.
Odin will never see com port. Any ideas?
Click to expand...
Click to collapse
If you have a Tmobile variant then I think u have downloaded the wrong file brother.
Go to page 1 of this post and download the zip, then extract it and flash the file via Odin.
http://forum.xda-developers.com/showthread.php?t=3408162
MukDroid said:
the file is G925TUVU1AOCG_G925TTMB1AOCG_G925TUVU1AOCG_HOME.tar I cannot find the link I downloaded from , sorry
Click to expand...
Click to collapse
Sent from my SM-G920T using XDA-Developers mobile app
---------- Post added at 01:51 AM ---------- Previous post was at 01:40 AM ----------
I used Odin version 3.10.6
Sent from my SM-G920T using XDA-Developers mobile app

cwhiatt said:
If you have a Tmobile variant then I think u have downloaded the wrong file brother.
Go to page 1 of this post and download the zip, then extract it and flash the file via Odin.
http://forum.xda-developers.com/showthread.php?t=3408162
Sent from my SM-G920T using XDA-Developers mobile app
---------- Post added at 01:51 AM ---------- Previous post was at 01:40 AM ----------
I used Odin version 3.10.6
Sent from my SM-G920T using XDA-Developers mobile app
Click to expand...
Click to collapse
Thank you the phone is now up and running!! I am not sure how I managed to download the wrong files but you saved the day I really appreciate it!

MukDroid said:
Thank you the phone is now up and running!! I am not sure how I managed to download the wrong files but you saved the day I really appreciate it!
Click to expand...
Click to collapse
It sounds like you may have been attempting to flash very outdated firmware. If you are not currently on a bootloader that allows a downgrade, you will not be able to flash older firmware. Only same or newer.
If you are at all unsure what version is correct for your phone, I highly suggest you avoid using Odin to make modifications. You have the potential to truly brick your phone.
On that note: your phone was not bricked, and Odin did see your device. Bricked means unrecoverable, and Odin will not flash without a valid target.