CyanogemMod 12 Lollipop - SD card and Wifi problems - Sony Xperia T, TL, TX, V

Hi,
A colleague of mine give me his Sony Xperia T (with Cyanogen 11 4.4.4) installed.
Because there is a bug with multiples calendars that are not synchronized (synchronized once, when configuring the account), I upgrade to CM 12 Lollipop.
After upgrading, a reset factory, installing Google Apps via recovery mode, I encounter two problems :
- All is working good with my home WIFI but not my Network WIFI (My computer is connected to this wifi network right now). I don't see it in the list of WIFI on my phone, but i See the others networks.
- When I want to use the camera, it says that I must install an SD card first... But an SD card is already installed, recognized by Android (I can see it in the "Stockage" section), I can browse the SD via the File Explorer. I have tried to to uninstall and reinstall the SD card but the problem remains.
Any Ideas ?
Thansk for your help,
Vincent

and1hotsauce said:
Hi,
A colleague of mine give me his Sony Xperia T (with Cyanogen 11 4.4.4) installed.
Because there is a bug with multiples calendars that are not synchronized (synchronized once, when configuring the account), I upgrade to CM 12 Lollipop.
After upgrading, a reset factory, installing Google Apps via recovery mode, I encounter two problems :
- All is working good with my home WIFI but not my Network WIFI (My computer is connected to this wifi network right now). I don't see it in the list of WIFI on my phone, but i See the others networks.
- When I want to use the camera, it says that I must install an SD card first... But an SD card is already installed, recognized by Android (I can see it in the "Stockage" section), I can browse the SD via the File Explorer. I have tried to to uninstall and reinstall the SD card but the problem remains.
Any Ideas ?
Thansk for your help,
Vincent
Click to expand...
Click to collapse
http://forum.xda-developers.com/xperia-t-v/help/qa-cyanogenmod-12-homebuild-t2947077/page14
do not Wipe Sdcard
Step
before your need use Flashtool go back Firmware Android 4.XX & ReBoot to 4.XX System & off system
fastboot flash boot boot.img
in TWRP you cand Wipe Anything , but do not Wipe Sdcard, [internal storage]
Then Install CM12 & APP
do not try TWRP back up, you will be Return Flash Firmware

Solved
Hi,
Thanks for your reply, But I did something else as describe in my third post (this solution does not need to reinstall any firmware) :
forum.cyanogenmod.org/topic/104879-cm12-issue-with-sd-card-and-wifi-network-detection/ (sorry, I removed the http because I'm not allowed to post links...)
Vincent

Related

[Q] HELP Getting Samsung Captivate to Mount...will not mount no matter what I do

Ok, I've had this phone for 2 months now. It's the 2.1 Eclair. It used to mount just fine, but now all it does is charge the phone when I attach the usb to the computer. I've eliminated the cord as the issue since my mom's captivate mounts just fine with it. I thought it was originally my computer, which is now Windows 7, but again my moms' captivate mounts just fine. It also won't mount to my other computer running XP. I've installed and uninstalled every samsung driver available but I still cant' get it mounted in either debugging mode or nondebugging mode. I also thought it might be a software issue since I had rooted the phone so I unrooted and did a hard reset. Still no mount! I want to get mounted, and not just by my wife!
At this point I would be happy to simply load apps via the sd card but I can't seem to successfully edit the settings.db file, either. Any help with mounting the phone or simply being able to load nonmarket apps via the sd card would be much appreciated.
Alternatively, here's a question to those much smarter than I. If I can't get the phone to mount via usb cable, how can you install a rom or nonmarket apps without attaching the usb cable?
Thanks!!
1. you can try to download a rom via wifi using internet browser. it will be stored in your \sdcard\download folder. also you need to download update.zip into your sdcard root folder.
2. shut down your phone and reboot into recovery, load the new recovery. (you may need to load twice)
3. flash the new rom by installing the zip file in your download folder.
sounds like it could be an driver prb i had same thing i belive went 2 samsung and got drivers reinstalled and phone mounted 2 pc with no troubles
I believe I found the issue.
Disable auto-sync.
Settings > Accounts and Sync > Deselect the auto-sync option.
My wifes phone had never been able to connect and mount via computer on the cable to the PC. Different PCs, different cables, everything. My phone always worked. First thing I ever did when reinstalling a new ROM was disable auto-sync. Soon as I disabled her auto-sync, the option to mount came right up.
Hope this helped.
Shi
*edit* I spoke too soon. Exchanging the phone tomorrow. It has other issues too...

UMS Mode for ExternalSD Card Jelly Bean Support

here simple application that will enabled UMS mode for External sdcard
root needed.
how to use:
safe way on version 2.5 is :
enable UMS Mode when cable usb is unplug
Back to Charge mode when cable usb is unplug
safe way on version 3.0 is :
do it on condition usb plugged
note:
if you plug into player or some device player , and you found that it cannot found the USB drive
in this case just do this
settings -> connectivity -> usb connection type
and do press or repress the "Charge Only"
in version 3.0 you will notice 1 triangle on task bar, its normal , it telling you mass storage is currently unmount
2 icon on task bar is telling you the mass storage successful unmount you can take it out
those of notice are normal if we do unmount the mass storage in android api level.
all the information about how to do it i found on XDA forum.
i do some research also code this app
version 2.1
fix sometime fail to mount back to external_sd folder
version 2.5
fix sometime got to bluescreen on windows
version 3.0
fix bluescreen on windows
using different approach to unmount the external SD card
version 3.2
bring back native method to mount and unmount, its speed up abit when using native method
by check the box to enable native mode
version 3.3
support Jelly Bean
thanks are goes to XDA Members
UMS_mode.apk
UMS_MODEv2.1.apk
UMS_Modev2.5.apk
UMS_ModeV3.0.apk
UMS_ModeV3.2.apk
UMS_ModeV3.3.apk
its working good tnx mate
Thanks for app. It is amazing
Best regards,
It does not mount back SDcard to /mnt/sdcard/external_sd after disconnect, so have to reboot after use it.
MTP is working but external_sd is empty.
your welcome guys,
@m0b :
i think you forget click on "back to charge mode"
bullghost said:
your welcome guys,
@m0b :
i think you forget click on "back to charge mode"
Click to expand...
Click to collapse
No, i try it, but it does not help, only reboot.
m0b said:
No, i try it, but it does not help, only reboot.
Click to expand...
Click to collapse
try the version 2.1,
i fix it
bullghost said:
try the version 2.1,
i fix it
Click to expand...
Click to collapse
now ist fine for me, tnx!
m0b said:
It does not mount back SDcard to /mnt/sdcard/external_sd after disconnect, so have to reboot after use it.
Click to expand...
Click to collapse
With the first version I have access to the card. After disconnecting I have to reboot the phone, so I can regain access to the card.
bullghost said:
try the version 2.1, i fix it
Click to expand...
Click to collapse
Version 2.1 gives reproducible blue screens with Win7 x64 SP1 at the first link when I confirm the superuser, or in further tries, when connect the USB cable.
Only uninstalling the apk helps to solve the problem.
A little off topic:
After UMS_mode.apk does not work for me, here is another way to access both memory cards in the P880 (and any other Android-Device) from Windows OS:
Install Total Commander (Shareware): http://www.ghisler.com
Install Total Commander Plugin "Android ADB" (Freeware): http://www.totalcmd.net/plugring/android_adb.html
Android device driver has to be installed too!
Through links, both SD-Cards appear with 3 differen pathes in the P880 operating system.
The external SD-Card has its mount point in (!) the internal SD-card:
Code:
Internal SD-Card:
\\\ADB\LG-P880\data\media\
\\\ADB\LG-P880\mnt\sdcard\
\\\ADB\LG-P880\sdcard\
2. external SD-Card:
\\\ADB\LG-P880\data\media\external_sd\
\\\ADB\LG-P880\mnt\sdcard\external_sd\
\\\ADB\LG-P880\sdcard\external_sd\
Bud Cord said:
A little off topic:
After UMS_mode.apk does not work for me, here is another way to access both memory cards in the P880 (and any other Android-Device) from Windows OS:
Install Total Commander (Shareware): http://www.ghisler.com
Install Total Commander Plugin "Android ADB" (Freeware): http://www.totalcmd.net/plugring/android_adb.html
Android device driver has to be installed too!
Through links, both SD-Cards appear with 3 differen pathes in the P880 operating system.
The external SD-Card has its mount point in (!) the internal SD-card:
Code:
Internal SD-Card:
\\\ADB\LG-P880\data\media\
\\\ADB\LG-P880\mnt\sdcard\
\\\ADB\LG-P880\sdcard\
2. external SD-Card:
\\\ADB\LG-P880\data\media\external_sd\
\\\ADB\LG-P880\mnt\sdcard\external_sd\
\\\ADB\LG-P880\sdcard\external_sd\
Click to expand...
Click to collapse
thanks bro , here version 2.5 will fix the bluescreen
Thanks a lot! useful for syncing with doubleTwist. can't stand the LG PC Suite its too slow.
Sent from my LG-P880 using xda premium
version 3.0 relase fix bluescreen again,
if you suffer on always media scanning you can turn it off on
setting -> application -> find "Media Storage" -> disable
Wow!
This is the greatest thing created for this phone so far.
MTP is painfully slow, doesn't work with cars/stereos/etc, requires installing drivers everywhere I go, crashes all the time, doesn't allow access with a file path, and somehow caused my sd card to wipe itself three times in two weeks, so this was a major issue for me that was making me regret buying the phone.
Initially after installing this app (v3.0), I had to repeatedly toggle UMS/MTP mode and plug/unplug my phone from the computer several times before it finally started working, but now it's perfect.
If you have a paypal or flattr link, and I'll send something your way. Or put it on the Play Store so I can buy it and update
Thanks!
thanks
ben! said:
This is the greatest thing created for this phone so far.
MTP is painfully slow, doesn't work with cars/stereos/etc, requires installing drivers everywhere I go, crashes all the time, doesn't allow access with a file path, and somehow caused my sd card to wipe itself three times in two weeks, so this was a major issue for me that was making me regret buying the phone.
Initially after installing this app (v3.0), I had to repeatedly toggle UMS/MTP mode and plug/unplug my phone from the computer several times before it finally started working, but now it's perfect.
If you have a paypal or flattr link, and I'll send something your way. Or put it on the Play Store so I can buy it and update
Thanks!
Click to expand...
Click to collapse
thank you , as far as you like it , is enough for me
ben! said:
This is the greatest thing created for this phone so far.
Click to expand...
Click to collapse
I can not confirm unfortunately.
I wanted to give the app still a second chance and have installed 3.0.
Then I restarted the phone, without starting the APP before.
Now it hangs on startup LG boot logo.
Even without the second SD card the same problem.
Any idea without factory reset or flashing KDZ?
My phone is still stuck in boot, but I have an access via adb shell to system.
Unfortunately I have no permission to access "/data"
Could anyone tell me the aplication name of this UMS-Tool under "/data/data" ?
I only found "com.noshufou.android.su" in classes.dex, but don't know wether this is right:
Code:
[email protected]:/data $ run-as com.noshufou.android.su
run-as com.noshufou.android.su
run-as: Package 'com.noshufou.android.su' is unknown
[email protected]:/data $
Ok, I guess it's not quite working perfectly for me now that I've used it a bit more, but I still love it.
1) it's really tricky to get it working initially. I almost always have to toggle it multiple times and sometimes reconnect the usb cable.
2) like someone else mentioned, it never remounts the SD card so I have to restart the phone to get it working again after I'm done.
I have not had any problems on boot like BudCord.
I'm running stock firmware 10f.
Anyone have v3 hosted any where else? I can't download from media fire.. no captcha support..
Tried stock browser, dolphin, and chrome..
Any chance to get it working on mac os x (10.6.8) ?
For the moment it is the only default i found with this phone : the lack of "connections" with Apple's OS :/
PS : I searched on the web and I found a solution for Mac OS X users : Android File Transfer (on the official website).
Sorry I can not the url because I am new on this forum.

Can't recognize in usb-mode

I have been running 4.0 for a long time, so i thought it was about time to get a newer version. so i ran the acmeuninstaller and was about to upload a new rom when i encountered a strange problem. i'm asked if i want to initialize the disk when i select mass storage mode. I have tried from webOS and from CWM, have also tried two usb cables, both my macbook pro and my windows 7 laptop. the original usb cable doesn't seem to be working anymore so i haven't got to try with that.
I didn't have any problems using recovery to transfer using nova com or preware. just the mass storage part that seem to be out of order.
any help is appreciated.
I'm starting to suspect something seriously wrong with the tablet.
i had ran a acmeuninstaller, but still booted into android. so i downloaded a rom and a file manager, and then a problem i've been having started to occur - processes dying etc. usually fixed by a reboot. which was one of the reasons i wanted to try something else.
so i took a reboot, and well - everything i had downloaded was gone. so i did the opposite thing, started deleting everything i've downloaded.
next reboot - everything was back in place.
More of this and i'll just use webOS which seem to work well. beside the usb connection that don't work.
I have never used any uninstaller to flash a new ROM. All I do is do a factory reset, clear cache, clear Dalvik cache then install new Rom and Gapps. I did this when I went from 10.1 to 10.2 to finally 11.0. Also, I have found that having the most current recovery installed will help also. For example...CWM version 6.0.4.7 is needed to install CM 11.0 because datamedia support is required to properly support emulated sdcard storage in 4.4. I also use CacheMate to regularly clear my caches.
This is a known occurrence with the touchpad.
DO NOT, if prompted, format the disc when connected in USB mode.
If you google your problem, there is a solution out there.
If you don't find it, let me knownand I'll try and find the link for you.
Your touchpad is not fubar !!
Peace

[Q] USB Connection Problem after update to Cyanogenmod 10.2.1

Folks,
I just updated my phone from a previous Cyanogenmod 10 to Cyanogenmod 10.2.1 with a full wipe/factory reset.
After the update I tried to re-install Google Apps to backup my Apps, contacts and setting. However, I cannot get a USB Connection with Win7 64 Bit. I have tried on two computers thus far.
I have reinstalled the drivers, have enabled USB-Debugging Mode but the Drive would not come up so I cannot copy the gApps File onto the SD card. I do not get an Unknown Device Error but when I connect the phone two "shaded" drives appear in windows but cannot be accessed.
Any ideas?
P.S.: Odin finds the Device in Download mode. Is there a way to flash the gApps File via Odin?
try booting into recovery and fixing permissions, not saying it will work but you could try.

USB-OTG not working

Hello!
2 pcs P20 Pro (now servicing). Tested 10 and 9 version, not read OTG (in system or in recovery).
Now offline (not PC) update from SD available only... this phone not support SD-Card! Only OTG-SD.
-Attached 3 other USB-OTG converter cable (1pcs new, 1pcs 20x used)
-Attached pendrive (exFAT, FAT32, NTFS)
-Attached SD (exFAT, FAT32) in Kingston USB-SD converter
Pendrive LED not on: not readed.
Tested OTG cable to other USB device, 5V ok, Data line voltage ok: USB all 4 pin ok!
Tested OTG cables other older droid 5.1 phone, all working, SD readed with converter, pendrive readed correctly.
One P20 Pro bricked. Bootloader locked, fastboot mode available only (screen blank), Multi-Tool flasher/unbricker "stock service flash" downloaded to phone and failed (no write permission). Hisuite not support this phone recovery. No other method to unbrick, only SD-update. How to working this port?
Live system not read OTG and bricked system not read OTG.
Live system developer mode settings (*#*#2846579#*#*) changed to default, Manufactture, Hisuite, same. Developer software upgrade: 1. Memory card, 2. APK standalone, not available OTG/USB. Connected to PC: Photo mode, File mode and Charging mode available only (not available reverse charge).
USB port measurement: not powered live system, booting, recovery "update OTG mode" not powered the USB port!
1 phone= inside cable USB to mainboard bad? 2 phone= 2 cable bad??? Not real!
Charging ok. PC connection ok.
What is a problem???
Hey Looking Forward To Help You..
1.Go To "SETTINGS"
2.Search For "OTG"
3.Some Phones Like Eg.Oneplus Have OTG Option In the Status Bar Customisation Tab..
4.Use An Prober Cable [OR] See If It Works On The Other Phone..
5.Important The Drive/SD You're Using Doesn't Have Any Hardware Issues!
6.Best Thing Is Two Option.
A.Software Update.
B.Factory Reset - Data Loss [Not Recommended]
7.Or It Must Be an Hardware Issue Please Reach Out To The Nearest Mobile Service Centre.
Alwaya XDA Peace
Hello!
I'm writed: NEED TO BRICKED PHONE = no settings, no menu, no system. (1-2-3 point not relevant)
4-5 writed: tested other type phone with cable, SD, pen, all working. P20 Pro not powered OTG (no 5V out)!
6: not available
7. Display changed, back changed, not original phone, not free (guarantee) service. Service + old unrooted, locked bootloader phone, ... too
I'm used IDT to flash. Only have CLT-AL00A-BD_1.0.0.46 Board Software firmware. Flashed in testpoint mode. All upload ok. After power on:
Imei: 000000000000...
Model: unknown
EMUI: 3.1
Droid: 5.1
Only have test softwares this firmware. No browser, etc.
How to update normal version?
*#*#2846579#*#* menu, update sd (read to available dload/update.app), restart, read SD 1-2s, Update failed!
What is a good version for SD update? First 8.1 or latest 10?
HiSuite searching update, no update!
Restored phone with PC and USB.
Problem: The TWRP version.
Changed TWRP version to 3.3, OTG working, newer version (3,4, 3.5) unsupported OTG.
More function not work in old version (restore backed up system partition: error, etc.).
Mr. V. said:
Restored phone with PC and USB.
Problem: The TWRP version.
Changed TWRP version to 3.3, OTG working, newer version (3,4, 3.5) unsupported OTG.
More function not work in old version (restore backed up system partition: error, etc.).
Click to expand...
Click to collapse
Hi there,can you please help me out ?I have one Huawei P20 pro, that had a fall and the back was smashed in to pieces,also glass on the back that's covering the camera was broken.I have cleaned it up and replaced the back on it ,now it was really temperamental,as of you tap on it it will just restat itself,apart from that wa ok,soo I was thinking maybe software error,soo done a factory reset and now is stuck in boot loop.Is not powering on the android operating system.I have tried all the restoration methods that you had tried upper but can't make it load the android operating system....I even bought that small and card reader that you can plug in the charger port to try and install the operating system again ,but even of the led light on the card reader is on , doesn't do anything...any guidance?
Thank you!
departe said:
Hi there,can you please help me out ?I have one Huawei P20 pro, that had a fall and the back was smashed in to pieces,also glass on the back that's covering the camera was broken.I have cleaned it up and replaced the back on it ,now it was really temperamental,as of you tap on it it will just restat itself,apart from that wa ok,soo I was thinking maybe software error,soo done a factory reset and now is stuck in boot loop.Is not powering on the android operating system.I have tried all the restoration methods that you had tried upper but can't make it load the android operating system....I even bought that small and card reader that you can plug in the charger port to try and install the operating system again ,but even of the led light on the card reader is on , doesn't do anything...any guidance?
Thank you!
Click to expand...
Click to collapse
If not rooted, use PC with Hisuite official software.
If not communicated to phone, need to reflash manually. This is not free.
In DC-Unlocker site download 2 software + pay 3 day license for this softwares and use.
Bootloop and cracking not related!
Cleared chaches??? Not solve?
Done factory erase,done cache memory erase,done restart and just staying on the Huawei screen where is saying down at the bottom Powered by Android for few minutes and after that goes in to the white meniu where you can select factory reset,updates (tried the WiFi update is not connecting),now I got the firmware and Kiwibird 4 in 1 card reader that you can plug up the "ass " of the phone usingOTG hopefully I can install the firmware from there...I have downloaded the firmware and just putting it on the SD card...have you tried that way?
Firmware install not working "offline" mode.
TWRP and any other not read OTG, only live system.
Another problem: OTG only support FAT/FAT32, not supported NTFS, ExFAT (Live system: need Paragon software). The firmware file more than FAT32 filesize limit (2GB), only stored NTFS or ExFAT = FW file too large for FAT.
Your FW upload only 3 method.
1. Boot to recovery, and set ADB mode, download the FW zip to DLOAD dir (from PC with USB cable + ADB), and install. (NOT TESTED!)
2. Boot to recovery, and set wifi recovery. Connect to wifi AP, download latest downloadable FW and install. (NOT TESTED)
3. Paid method: DC-Unlocker & DC-Phoenix work with standard recovery (limited access) and work own uploaded recovery (self opened bootloader/virtual testpoint).
OTG/SD not option for FW update!
Thanks you for your time,and writing back to me,yes,good point with different types of partitions,I forgot about it...I did try the nr.2 method and is not working,it can't download anything,I have trying different wiFi points,not starting any download,it does connect to the WiFi but can't find anything to be downloaded.
First method is not going to work as I have no access to set ADB mode,only fastboot mode,and is displayed that phone is locked soo, bootloader is locked and can't open it...soo only method to try is theast one...but don't know how much will that cost me.
Also I am thinking of other people said that the battery can have a problem too as my battery is getting empty fast...also something strange maybe..but if you tap the phone on the upper side on the edge it's restarting itself...I am thinking to open it up and try like that as in the past had been dropped soo back glass and camera glass have been replaced,but was working,until I have done factory reset and the process got interrupted in the middle of it and that was it...since.then..Inhave tried reset, factory reset,wipe cache, nothing working.
The softwares for 3 day ~20$. The DC-unlocker site write correct actual price.
If bootloader not opened, only available FW-update in Hisuite Huawei official software.
Test in recovery mode or bootloader mode.
(My recovery is TWRP, not available recovery method. Your available.)
Test connect to phone this software! If yes, but not available firmware, need to use special VPN software. Download offline your phone firmware to PC, or set specified link to VPN soft and Hisuite: update available! (Need Hisuite downgrade for this VPN method.)
If this update not working, purchase 3day license.
Need offline firmware file for your phone.
Soft-bootloader open if not working, use testpoint. (The DC-Phoenix manual write the testpoint position.)
Start the process in PC, Short testpoint to GND and plug USB. (If need, install drivers.)
Started upload unlocked bootloader and unlocked old recovery. After finished, reboot to recovery. (Without accu, work end... after reboot only work with plugged accu.) (Not need unplug accu!)
After booted recovery, wait PC to identify recovery mode, and started download.
The download 2 part! 1= firmware, 2=cust file. Need all selecting!
The download automated. Please wait for 100%. After end, rebooted to system.
Check IMEI, phone signal, MAC numbers. All ok? End flashing.
Wrong or no IMEI, bad MAC? Need the second software.
The second software unlock bootloader, FRP lock, all lock.
Unlocking bootloader (not need): software say the unlocking number, phone boot bootloader, PC USB ADB (Fastboot) command need to write the code, phone question: yes? Is yes, rebooted to recovery and CLEAR ALL DATA! After cleraing, boot system.
All phone start displayed "Phone untrusted".
Unlocked bootloder = uploadable TWRP or any recovery, after not need testpoint to flash.
Root: only rootable 8.1 system. (Not tested 8.1+, bootloader code not readable.)
Hi there mate,I have manage.to fix my phone,just following an old post here,with one russian website,where I got the firmware,put it on the SD card ,by the way you can make it eXFat ,will work for larger sizes,mine was 128 GB,and had to reboot the phone in update mode but selecting OTG/SD and it worked first time!I manage to update it with Android 10.After that all good,done the updates up to 12.
Thank you for your support and time!
Have a great week!
8.1 (stock) System and recovery not compatibilie / not read ExFat.
I have 8.1 System (rootable). In 8.1 OTG/SD update not working.
Check your filesystems:
Code:
$ cat /proc/filesystems
...
msdos
vfat
exfat
...
(This is a different device.)
Yes, system ok... i was wrong.
TWRP recovery not read any OTG! Other version TWRP read OTG, and not read correctly system partitions (half phone not read).
Standard recovery not available for me to testing.

Categories

Resources