[Fixed] Wrong android status? - AT&T Samsung Galaxy S 5

Recently I tried to update my rooted phone using the safestrap method http://forum.xda-developers.com/att-galaxy-s5/general/how-to-root-g900aucu2aoa1-4-4-4-2-3-2015-t3021120 however I didn't read all the instructions and ended up having to reflash back to stock http://forum.xda-developers.com/showthread.php?t=2714455 and got the black screen. I tried reflashing stock multiple times and nothing.
fast forward with some help From OPOfreak I got my phone working again.
Ok now for the new problem.
I originally got the phone to work after flashing G900A_OA1_Stock_Kernel
The phone only seems to work if I flash this file. None others. Not even the NCE firmware.
Also I keep getting a notification stating "Unauthorized actions have been detected. Restart your phone to undo any unauthorized changes." I've restarted a couple times but doesn't seem to do anything.
also I noticed in my about device: the baseband version is NCE, The build number is also NCE, but the SE for Android status shows enforcing 4.4.4.
I've been searching around and it doesn't seem like anyone else has had this problem. Any help would be much appreciated.

Ndvorak said:
Recently I tried to update my rooted phone using the safestrap method http://forum.xda-developers.com/att...to-root-g900aucu2aoa1-4-4-4-2-3-2015-t3021120 however I didn't read all the instructions and ended up having to reflash back to stock http://forum.xda-developers.com/showthread.php?t=2714455 and got the black screen. I tried reflashing stock multiple times and nothing.
fast forward with some help From OPOfreak I got my phone working again.
Ok now for the new problem.
I originally got the phone to work after flashing G900A_OA1_Stock_Kernel
The phone only seems to work if I flash this file. None others. Not even the NCE firmware.
Also I keep getting a notification stating "Unauthorized actions have been detected. Restart your phone to undo any unauthorized changes." I've restarted a couple times but doesn't seem to do anything.
also I noticed in my about device: the baseband version is NCE, The build number is also NCE, but the SE for Android status shows enforcing 4.4.4.
I've been searching around and it doesn't seem like anyone else has had this problem. Any help would be much appreciated.
Click to expand...
Click to collapse
I'd just Odin back to NCE make sure you don't flash bootloader. Then just start over with the NG3 to OA1 update thread that's how I took the 4.4.4 update

OPOfreak said:
I'd just Odin back to NCE make sure you don't flash bootloader. Then just start over with the NG3 to OA1 update thread that's how I took the 4.4.4 update
Click to expand...
Click to collapse
I tried multiple times. But every time I tried I got a black screen at start up. I tried flashing them all at once, I tried flashing them all separately, I even tried flashing with the BL just to see. Every time I got the black screen.
On a whim I tried flashing just the NG3 modem to see what would happen. It seemed to work. Phone acted really weird, I had Baseband verison NG3, Build Number NCE, But I got the Android status back to 4.4.2.
after all that I was finally able to flash back to NCE, then took that OTA for NG3.
Thank you for all your help.
My phone is completely stock again. Haven't rerooted or anything. Should I go ahead and try http://forum.xda-developers.com/att-galaxy-s5/general/how-to-root-g900aucu2aoa1-4-4-4-2-3-2015-t3021120 to get 4.4.4 ? or will it OTA again to it?

Ndvorak said:
I tried multiple times. But every time I tried I got a black screen at start up. I tried flashing them all at once, I tried flashing them all separately, I even tried flashing with the BL just to see. Every time I got the black screen.
On a whim I tried flashing just the NG3 modem to see what would happen. It seemed to work. Phone acted really weird, I had Baseband verison NG3, Build Number NCE, But I got the Android status back to 4.4.2.
after all that I was finally able to flash back to NCE, then took that OTA for NG3.
Thank you for all your help.
My phone is completely stock again. Haven't rerooted or anything. Should I go ahead and try http://forum.xda-developers.com/att...to-root-g900aucu2aoa1-4-4-4-2-3-2015-t3021120 to get 4.4.4 ? or will it OTA again to it?
Click to expand...
Click to collapse
I used the the thread myself then I didn't have enough to worry about update failure

OPOfreak said:
I used the the thread myself then I didn't have enough to worry about update failure
Click to expand...
Click to collapse
awesome. Thank you. I'll make sure to do it correctly this time.

Related

[Q] Question about firmware...

Alright, so I updated my phone when the first OTA update was released, and it installed successfully no problems. After this I got into rooting my phone so that I could get rid of the AT&T crapware, use launcher pro, and enable sideloading for apps. I thought that I would check for another update since rumors were swirling about 2.2, and to my surprise it detected a package to download. I was able to download it, however it wouldn't finish installing on the phone and said that it could not be installed. Thinking that this was due to my root, I used Odin to flash back to stock and retry the install, and it still didn't work. So, after that I reverted back to the root, and decided to go and check the firmware and baseband version What is confusing to me is that for "firmware version" it says that I have "2.1-update1", but my baseband version still says "1897UCJF6" instead of "JH7". Now when I try to install whatever supposed update that is available, it downloads and then gets stuck at 50% in the progress bar when trying to install. So I guess my question is, should I be worried about this? Is this the current version, and does it just say "JF6" because of my root? Also, will I need to unroot if I want to install the 2.2 update whenever it comes out?
I apologize for the novel, I'm just trying to be as informative about my situation as possible. Any help with this would be greatly appreciated.
Thanks
JF6 is the stock firmware and JH7 was the ota update.
Sent from my Captivate
Alright thanks, but why is my phone still displaying "2.1-update1" if I still have the stock firmware? Is it because of the root that it is displaying JF6 instead of JH7?
goosefraba91 said:
Alright thanks, but why is my phone still displaying "2.1-update1" if I still have the stock firmware? Is it because of the root that it is displaying JF6 instead of JH7?
Click to expand...
Click to collapse
JH7 was also considered 2.1-update1
there is not an official 2.2 yet
Okay well thanks, I think I'm about to just flash to a 2.2 ROM, I'm tired of waiting on samsung for 2.2
i need help with the rooting of my phone
bosoxtm said:
i need help with the rooting of my phone
Click to expand...
Click to collapse
View this topic:
http://forum.xda-developers.com/showthread.php?t=739304

Rooted with motochopper and cannot do firmware update

I've tried uninstalling superuser and all it has. I've tried like 5 times now the install for the new firmware update won't install i keep getting a android with the red exclamation sign and its front door open, then it boots in to android and says update failed. Help please!
Do I have to factory restore first or somthing? i really dont wanna have to cause i just got this phone from at&t as a referb for my old one that had battery issues and its not fun setting everything up over again lol
\
Hi buddy.
First of all, I don't entirely understand what are you trying to do. What to you mean with "firmware update"? Do you want to flash a new ROM?
mauchito said:
Hi buddy.
First of all, I don't entirely understand what are you trying to do. What to you mean with "firmware update"? Do you want to flash a new ROM?
Click to expand...
Click to collapse
At&t just pushed an ota firmware update that won't install stock ROM is on here only rooted
djshadowxm81 said:
At&t just pushed an ota firmware update that won't install stock ROM is on here only rooted
Click to expand...
Click to collapse
Got it. Check this thread: http://forum.xda-developers.com/showthread.php?t=2751263
You may find all the information you need there. Even if you can't, don't worry, is just a minor update, it is not Kitkat.
I've already been through that thread and haven't really found my solution to my issue. Any ideas?
djshadowxm81 said:
I've already been through that thread and haven't really found my solution to my issue. Any ideas?
Click to expand...
Click to collapse
Sadly no, my friend. Any reason in particular about why you want this specific update?
Let's hope somebody else in this forum can help you.
Are you running a stock recovery? Have you tried using Myth Tools to flash back to stock?
Its running stock rom from factory everything is factory right now
I kept getting the dead Android as well. We're you running a KK ROM on your phone before restoring to stock? I was running Validus and tried to use Myth Tools to flash a stock ATT 4.1.1 ROM which also failed to take the update. I then installed a 4.1.2 Bell stock ROM (my phone came from Bell) via Myth, let the phone boot, and then flashed a stock ATT ROM via Myth and it took the update.
audit13 said:
I kept getting the dead Android as well. We're you running a KK ROM on your phone before restoring to stock? I was running Validus and tried to use Myth Tools to flash a stock ATT 4.1.1 ROM which also failed to take the update. I then installed a 4.1.2 Bell stock ROM (my phone came from Bell) via Myth, let the phone boot, and then flashed a stock ATT ROM via Myth and it took the update.
Click to expand...
Click to collapse
I am on 4.1.1 from the factory. This is a referb phone from the factory like not even a week old yet. Boot loader isn't even unlocked. Its all stock and I'm getting dead android.
If you're getting the dead Android, it makes me believe that something may be wrong with the stock recovery. Some people were able to get the update to install using the latest Philz Touch recovery rather than stock recovery.
This might help from Skeevy: http://forum.xda-developers.com/showpost.php?p=52745043&postcount=7

[Q] AT&T (i537) active problem with unbricking help please!

Hey guys so recently I had rooted my i537 S4 active and have been researching and modifying here and there until i decided to get a custom ROM. I found WickedROM via this post http://forum.xda-developers.com/show....php?t=2491762 and considering it had worked on this person's i537 I decided to flash the ROM. After flashing I had become stuck in a bootloop and I can't get to anything besides DOWNLOAD MODE. Due to this problem I decided to run a stock firmware via Odin with this one_click http://rootzwiki.com/topic/44121-sgh...axy-s4-active/ ... this filled up until the bar was about 90% and then all of a sudden fails at <ID:0/003> system.img.ext4. I've tried other firmwares with no luck and have resorted to posting about this problem. please help and guide me in the right direction, my phone's been bricked for 3 days now. Trying to boot into recovery gives me the "there's been a problem with your firmware update, please run in Kies recovery" and Kies doesn't recognize my phone.
nickeon1 said:
After flashing I had become stuck in a bootloop and I can't get to anything besides DOWNLOAD MODE.
Click to expand...
Click to collapse
You forgot to flash the masterpatch which makes roms designed for the AT&T S4 (not active) work for our phone. If I understand correctly it needs to be flashed immediately after the rom is installed (i.e. still in SafeStrap, before you attempt to boot up).
nickeon1 said:
Due to this problem I decided to run a stock firmware via Odin with this one_click http://rootzwiki.com/topic/44121-sgh...axy-s4-active/ ... this filled up until the bar was about 90% and then all of a sudden fails at <ID:0/003> system.img.ext4 and Kies doesn't recognize my phone.
Click to expand...
Click to collapse
That link is for MF1, an outdated firmware. Here is a collection of stock i537 firmwares. I can personally confirm the NH3 file is usable since I used it to upgrade to the most recent firmware without losing root.
This thread will provide you instructions on how to use Odin to flash any stock firmware. I can only add I recommend using Odin v3.07, as I've used it with the most success and fewest issues. Also use NH3 firmware or at the very least NE3, because anything else is outdated, assuming you were on stock KitKat originally, and you will encounter similar issues if trying to downgrade to jellybean.
Also flashing with Odin deletes all your saved files/user info etc. on your phone. From the sound of it, fixing your phone is going to involve inevitably wiping it one way or the other, so I hope you have a backup saved somewhere other than your phone's internal memory.
nickeon1 said:
Hey guys so recently I had rooted my i537 S4 active and have been researching and modifying here and there until i decided to get a custom ROM. I found WickedROM via this post http://forum.xda-developers.com/show....php?t=2491762 and considering it had worked on this person's i537 I decided to flash the ROM. After flashing I had become stuck in a bootloop and I can't get to anything besides DOWNLOAD MODE. Due to this problem I decided to run a stock firmware via Odin with this one_click http://rootzwiki.com/topic/44121-sgh...axy-s4-active/ ... this filled up until the bar was about 90% and then all of a sudden fails at <ID:0/003> system.img.ext4. I've tried other firmwares with no luck and have resorted to posting about this problem. please help and guide me in the right direction, my phone's been bricked for 3 days now. Trying to boot into recovery gives me the "there's been a problem with your firmware update, please run in Kies recovery" and Kies doesn't recognize my phone.
Click to expand...
Click to collapse
When you flash back to stock, you can only flash a version that is equal to or greater than the version you were already on. So if you were originally on 4.4.2 you can only flash a 4.4.2 stock ROM, any other ROM will fail to flash.
thisisapoorusernamechoice said:
You forgot to flash the masterpatch which makes roms designed for the AT&T S4 (not active) work for our phone. If I understand correctly it needs to be flashed immediately after the rom is installed (i.e. still in SafeStrap, before you attempt to boot up).
That link is for MF1, an outdated firmware. Here is a collection of stock i537 firmwares. I can personally confirm the NH3 file is usable since I used it to upgrade to the most recent firmware without losing root.
This thread will provide you instructions on how to use Odin to flash any stock firmware. I can only add I recommend using Odin v3.07, as I've used it with the most success and fewest issues. Also use NH3 firmware or at the very least NE3, because anything else is outdated, assuming you were on stock KitKat originally, and you will encounter similar issues if trying to downgrade to jellybean.
Also flashing with Odin deletes all your saved files/user info etc. on your phone. From the sound of it, fixing your phone is going to involve inevitably wiping it one way or the other, so I hope you have a backup saved somewhere other than your phone's internal memory.
Click to expand...
Click to collapse
Thanks very much for this! I flashed an NE3 firmware and was able to get my phone in working condition. So if I wanted to flash a rom on my phone I would have to masterpatch AFTER the rom flash via Safestrap?
nickeon1 said:
Thanks very much for this! I flashed an NE3 firmware and was able to get my phone in working condition. So if I wanted to flash a rom on my phone I would have to masterpatch AFTER the rom flash via Safestrap?
Click to expand...
Click to collapse
Yes, but make sure the phone doesn't reboot in between flashing the ROM and flashing the Masterpatch.

(Q) I527 stuck in Download

(RESOLVED)
Alright so in order to not bore you all, ill get to the point. I messed up trying to do impossible things with my I537 because I didn't read any forums before trying... stupid I know. That being said I now have a "soft bricked" phone stuck in download mode. I have been looking around (I assume not hard enough) for the right file to flash with ODIN to get me back up and running so I can actually do my research this time before playing with different stock roms.
Can anyone point me in the right direction to get the right files to unbrick this thing?
First things first: this forum is for the SGH-I537 AT&T Galaxy S4 Active, not the I527 Galaxy Mega. I just want to make sure you have the right device. If you have the Mega (I527), you want this forum, and ignore the rest of this post.
If you do in fact have the Galaxy S4 Active (I537), then check out this thread, it has all the official firmware files that have been released for this device. I would recommend using the firmware files for NE3 (KitKat) to flash in Odin. The NE3 build is the easiest to root, and you can always use the keep-root method to upgrade to lollipop if you so desire.
Oh yes sorry that was a mistype. I did indeed mean to type I537. Ok Ill give this a shot and update on how it goes.
Ok so Im currently downloading the Full Odin package, but I have already rooted the phone with towelroot. Is that going to be an issue?
Nah it won't be a problem. Flashing firmware files with Odin will unroot your phone (it resets everything to original factory settings). You can always reroot with towel root again
Ok new problem though, I was able to get everything flashed through ODIN, it restarts; then I get the Samsung boot screen, att boot screen and then it just goes black. I put it back into download mode and tried to re-flash it a couple times but it keeps doing the same thing. Thoughts? This Is the section I got the file from;
I537UCUCNE3 (4.4.2) Released 2014-06-06 - OFFICIAL
Issue has been solved, I just had a battery issue but after changing that and letting the phone charge up it started up great. Thanks for all your help "thisisapoorusernamechoice"

Unbrick sm-g900a on OC4

So here's the story. Over a year ago I rooted my wife's phone with fireflash and the stock rooted oc4 rom. Well my wife got tired of the update popup so I decided to put it back to stock. I made a mistake I removed root thinking it would allow me to update to the latest att ota. Not the case after rebooting the phone wouldn't get past the att logo.
After this I tried wiping the cache then factory wiping the phone with the same results.
Then I tried flashing the oc4 partitions and kernel. Still no bueno.
I then tried downgrade to nce. Really no bueno. I got it to try and boot again by flashing the partitions and kernel above.
Now I'm looking for advice on how I can fix this sooner rather than later to prevent suffering the wrath of my wife.
Thanks in advance
Did removing root cause the issue, or trying to (taking the) OTA? It makes a difference which bootloader you have. And what does your bootloader read at the top (vol down+menu+power buttons at the same time, then volume key to continue)?
I believe the bootloader was of1 not oc4. As I rooted and installed oc4 through munizre's tutorial. More importantly I was able to unbrick the wife's phone by loading the full stock 5.1.1 update some gent had posted on this forum.
jdfellows said:
I believe the bootloader was of1 not oc4. As I rooted and installed oc4 through munizre's tutorial. More importantly I was able to unbrick the wife's phone by loading the full stock 5.1.1 update some gent had posted on this forum.
Click to expand...
Click to collapse
See my post here buddy. It may just save your life/phone (and prevent wrath as it did in my case).
http://forum.xda-developers.com/showpost.php?p=68297868&postcount=42

Categories

Resources