I recently flashed a stock rom so I can update firmware automatically, but the touch screen doesn't work, I can't even unlock it and when I try to shut it off, by holding power button, it just flashes the buttons and doesn't shut off no matter how long you hold it, so my only option is to wait till it dies I guess. My question is, what the heck am I supposed to do if I can't flash other ROMs with a stock recovery? It's as if I have no rom, nor custom recovery on my phone. I can't enable debugging cuz I can't get into the phone.
Related
Okay so I was testing out the Molecule ROM along with SetiroN's i9000 Kernel. I installed the backlight notification app on the kernel's page and went to reboot. After the reboot I can no longer use the power button while in recovery mode and when I try to reflash back to stock with Odin I get a FAIL message while its checking the file system. Is it bricked or does someone know a way to fix this?
Are you able to get back into download mode successfully?
This happened to me with i9000 kernels. You should be able to flash back to stock no problem.
remove battery & sim and disconnect phone,
open odin,
put battery in and hold Vol down,
plug in USB,
Flash
Should work for you.
was using my nexus one as i was switched it off removed the sim card from this phone placed it in another phone... left my nexus one on charge and turned it on left the room when i got the vibrate didnt even saw wether it was completly on or not... came back home saw the phone off... tried to turn it on but it wouldnt.... then connected the charger to the phone then turned it on and it shows a X and a unlocked sign at the bottom stays for a while and then the screen gets black and the same thing happens over and over again
Its going in a reboot loop I think.
Try going into the bootloader by pressing the trackball and power button together.
and then enter bootloader and then recovery.
In the recovery select reboot.
Btw do you have a nandroid backup?
I do have a backup lying around somewhere but i'm not sure of that. And i tried that boot loader thing but when i go to that menu as soon as i press the volume - button the phone boots off again
did you try the 3 finger:
pwr/vol-/trkball at same time may take up to 20 seconds to boot into bootloader
or, may need to use fastboot from command terminal and flash new recovery/rom like passimg to go back to stock then upgrade from there
pass image method is in wiki
Try this:
- Press the power button and the trackball together
- Select Bootloader and then Recovery
- Flash a different ROM (Stock\CM\MIUI\or try flashing again your current rom)
- If it doesn't work, flash a new rom AND wipe data and cache
Hey guys!
I have madea mistake and need your help... Today I finally decided to unlock the bootloader. That went ok. Then I wanted to install a custom rom, namely PAC. I was on stock 434 firmware. I then proceeded to flash boot.img from PAC to get the recovery (big mistake, I know). And now the phone is stuck turned on with a black screen and I cant turn it off at all
If i wait for the battery to die and then try to enter fastboot mode and install another boot.img (doomlord for 434 firmware) will that be possible or what should i do :S Hope its not permanently bricked...
Thank you for your help!
No big deal, just don't get nervous when things like this happen.
Ok, so first, to turn off the device, you have to hard power it off by pressing Power Button plus Volume Up together until the phone vibrates three times. Now that the phone is turned off, you might as well try to enter recovery by pressing volume up after the purple led flashes (if the kernel was installed correctly the first time).
If you get a black screen still, download EMMA Flashtool, follow the instructions to bring your phone back to life.
Now you are now on stock rom and kernel and you might as well give it another shot.
Keep in mind that flashing first the PAC kernel to get recovery is not a mistake. Kernel is not rom dependant, as long as there is a kernel with recovery booting, it don't matter if the rom is not compatible with the kernel (like in this time, you have pac kernel, and a stock rom over it, right?)
DrKrFfXx said:
No big deal, just don't get nervous when things like this happen.
Ok, so first, to turn off the device, you have to hard power it off by pressing Power Button plus Volume Up together until the phone vibrates three times. Now that the phone is turned off, you might as well try to enter recovery by pressing volume up after the purple led flashes (if the kernel was installed correctly the first time).
If you get a black screen still, download EMMA Flashtool, follow the instructions to bring your phone back to life.
Now you are now on stock rom and kernel and you might as well give it another shot.
Keep in mind that flashing first the PAC kernel to get recovery is not a mistake. Kernel is not rom dependant, as long as there is a kernel with recovery booting, it don't matter if the rom is not compatible with the kernel (like in this time, you have pac kernel, and a stock rom over it, right?)
Click to expand...
Click to collapse
Thank you for your help! Worked like a charm, got my PAC and smile back :laugh:
Hi guys!
I need your help! I'was totally noob and i flashed
HTML:
http://forum.xda-developers.com/showthread.php?t=2255900
4.3 GE T-Mobile US kernel to my phone and it's totally bricked! Only "HTC Quetly Brilliant" logo what I see! How I can get back my phone to life?
pls. help!
If I have another same phone (One, T-Mobile HUN), can I get out of it the kernel and everyrithing what I need, and I can flash back that to my One with fastboot?
brutalatty said:
If I have another same phone (One, T-Mobile HUN), can I get out of it the kernel and everyrithing what I need, and I can flash back that to my One with fastboot?
Click to expand...
Click to collapse
can you get into recovery? or nothing at all. turn the phone off completely (hold the power button for around 15 seconds near a bright light source). then when you attempt to turn it back on hold the VOL down button. it will go into bootloader and select recovery option. once in recovery you can atleast sideload another 4.2.2 kernel on so you can fully boot again.
re
syaoran68 said:
can you get into recovery? or nothing at all. turn the phone off completely (hold the power button for around 15 seconds near a bright light source). then when you attempt to turn it back on hold the VOL down button. it will go into bootloader and select recovery option. once in recovery you can atleast sideload another 4.2.2 kernel on so you can fully boot again.
Click to expand...
Click to collapse
Yes I can boot in recovery, but the sideload don't work because USB debug is off on the phone, and I can only us fastboot... Somehow can I flash the kernel with fastbott if I save out another HTC One T-Mobile HUN?
I have the i537 model. I rooted to OC7 last week, but my touchscreen was being unresponsive for some reason or another. I decided to revert back to stock firmware, but messed up in the process - tried to flash each file one by one, when I was supposed to do them all at once.
Now, when I do the power + vol down + home button , it doesn't take me to download mode and boots to a stuck AT&T logo...
Is there any way to fix this, or am I going to have to buy a new phone.....
Im not sure but u should try, first u must release HOME and POWER buttons and let the Volume down pressing. And i guess u cant flash via odin means ur phone still got custom recovery, try to go there first? Hope u will fix it soon