Hello!
Could someone port the latest TWRP to our Xperia V, please please please? ))
The latest 2.8.5 FOTAKernel Image for mint is working almost perfectly on our tsubasa, the only issue is it does not allow to flash serious zips, like ROM zips, because of the device check (it says I have mint and the flashable zip is only for tsubasa ). So could someone modify this device check to tsubasa somehow? And after that I guess it would good to go, since the 2 device, mint and tsubasa is almost the same in everything. :fingers-crossed:
Best regards,
Zalan
banciii said:
Hello!
Could someone port the latest TWRP to our Xperia V, please please please? ))
The latest 2.8.5 FOTAKernel Image for mint is working almost perfectly on our tsubasa, the only issue is it does not allow to flash serious zips, like ROM zips, because of the device check (it says I have mint and the flashable zip is only for tsubasa ). So could someone modify this device check to tsubasa somehow? And after that I guess it would good to go, since the 2 device, mint and tsubasa is almost the same in everything. :fingers-crossed:
Best regards,
Zalan
Click to expand...
Click to collapse
You might try the attached one.
I've unpacked the image and modified the default.prop file.. replaced every occurence of "mint" by "tsubasa"
However, I haven't tested it yet.
By the way, this is no flashable zip.. I had to compress the file because of XDA's file size limitation for .img files.
banciii said:
Hello!
Could someone port the latest TWRP to our Xperia V, please please please? ))
The latest 2.8.5 FOTAKernel Image for mint is working almost perfectly on our tsubasa, the only issue is it does not allow to flash serious zips, like ROM zips, because of the device check (it says I have mint and the flashable zip is only for tsubasa ). So could someone modify this device check to tsubasa somehow? And after that I guess it would good to go, since the 2 device, mint and tsubasa is almost the same in everything. :fingers-crossed:
Best regards,
Zalan
Click to expand...
Click to collapse
It has nothing to do with "serious zips". Read this if you like.
WhiteNeo said:
You might try the attached one.
I've unpacked the image and modified the default.prop file.. replaced every occurence of "mint" by "tsubasa"
However, I haven't tested it yet.
By the way, this is no flashable zip.. I had to compress the file because of XDA's file size limitation for .img files.
Click to expand...
Click to collapse
Thanks again, almost. With your img I can flash CM zip again, but gapps buggy. It installs without error, but after boot, every single google apps force close and can't use the ROM. Can't figure it out why, I made full clean install. Other features looks fine so far. But huge thanks for the try anyway.
banciii said:
Thanks again, almost. With your img I can flash CM zip again, but gapps buggy. It installs without error, but after boot, every single google apps force close and can't use the ROM. Can't figure it out why, I made full clean install. Other features looks fine so far. But huge thanks for the try anyway.
Click to expand...
Click to collapse
Wanna send a logcat of the fc? ^^
Maybe it's an issue with a recovery binary or something..
WhiteNeo said:
Wanna send a logcat of the fc? ^^
Maybe it's an issue with a recovery binary or something..
Click to expand...
Click to collapse
Ohh, did not think u would take care of it beside your other tons of work thanks, will try tomorrow ))
banciii said:
Ohh, did not think u would take care of it beside your other tons of work thanks, will try tomorrow ))
Click to expand...
Click to collapse
If it's easy to fix I'll try it. But I can't promise anything.
WhiteNeo said:
If it's easy to fix I'll try it. But I can't promise anything.
Click to expand...
Click to collapse
Just tried the backup-restore option with every partitions (dalvik, cache, system, data, secure). Dunno what exactly, but something is very buggy. I don't get any error during the backup, but after the restore, my phone does not start. When I choose system reboot after the restore I only get black blank screen after the sony kernel logo, then I get a reboot after about half minute and back into the recovery automatically.
So after that, I tried the install which I mentioned earlier. I wiped everything again and installed only 0214 nightly CM12 build. Booted, worked fine. Then installed the latest stock (PA) gapps, reboot and the gapps force closes started. Here is the logcat, but I guess it's not that case anymore since the buggy backup/restore function.
https://www.dropbox.com/s/b5lgn60s2l5xp8b/twrp-gapps.txt
Related
Stock Rooted OTA 4.08.605.19 710RD Rom
Stock rooted ota 4.08.605.19 710RD rom. It is rooted, zip aligned, has busybox and comes in odexed or deodexed versions. Other than that it is untouched. Enjoy
[standard flashing disclaimer here]
Do a full wipe (boot, system, data, datadata, cache, android secure) except for sdcard and emmc, then flash like any other rom.
Stock rooted ota 4.08.605.19 rom may be able to be flashed over Stock rooted ota 4.08.605.15 rom, but is untested. If you flash over and have issues, do a full wipe and fresh install.
DOWNLOAD ODEXED - MD5 - Mirror
DOWNLOAD DEODEXED - MD5 - Mirror
_
2-13-2013 - Fixed TWRP flashing issues.
3-13-2013 - Fixed Superuser issues.
Sweet! Thank your sir.
Been waiting for this- One question I forget on the Dinc can you delete system apps on the phone?
I just activated my dinc again on pagepluscellular($12) I have to say for it's age the little guy holds up well. Looking forward to more roms and hopefully no more 2am reboot issue.
ToyTank said:
Sweet! Thank your sir.
Been waiting for this- One question I forget on the Dinc can you delete system apps on the phone?
I just activated my dinc again on pagepluscellular($12) I have to say for it's age the little guy holds up well. Looking forward to more roms and hopefully no more 2am reboot issue.
Click to expand...
Click to collapse
Just grab a root file explorer.
Sent from my Nexus 7 using Tapatalk 2
Osiris19 said:
Just grab a root file explorer.
Click to expand...
Click to collapse
Thank you I forgot dinc has that level of system access just with root. IIRC titanium bu can also.
ToyTank said:
Thank you I forgot dinc has that level of system access just with root. IIRC titanium bu can also.
Click to expand...
Click to collapse
I pulled out my old Incredible to see if I could breathe some new life into it and updated it to TWRP 2.4.1.0 and made a NANdroid backup of my old ROM. Went to go install it and get the Status 2 error, so I put in a newer update-binary. Not a big deal. I go to flash it again, and I get the Status 7 error, meaning I need to update to a newer version of my recovery. Not possible! So I re-flashed recovery and tried again. No dice. I can still restore my backup, so it's still alive right now. I'm curious to know if anyone else is experiencing this. Does anyone have any ideas?
IceDragon59 said:
I pulled out my old Incredible to see if I could breathe some new life into it and updated it to TWRP 2.4.1.0 and made a NANdroid backup of my old ROM. Went to go install it and get the Status 2 error, so I put in a newer update-binary. Not a big deal. I go to flash it again, and I get the Status 7 error, meaning I need to update to a newer version of my recovery. Not possible! So I re-flashed recovery and tried again. No dice. I can still restore my backup, so it's still alive right now. I'm curious to know if anyone else is experiencing this. Does anyone have any ideas?
Click to expand...
Click to collapse
Let me do some testing. I made it twrp compatible but never tested with twrp only cwm. I may have messed something up.
EDIT: FIXED!! Thanks for bringing it to my attention. I haven't gotten much feedback so far. Just redownload and flash.
cmlusco said:
Let me do some testing. I made it twrp compatible but never tested with twrp only cwm. I may have messed something up.
EDIT: FIXED!! Thanks for bringing it to my attention. I haven't gotten much feedback so far. Just redownload and flash.
Click to expand...
Click to collapse
Your zip works now. What was the problem?
Also, I've always been able to edit ROM zips and delete and add apks without any issue, but I can't now with this one. It keeps giving me the status 7 error about 80% through the install when all I do is delete some Verizon bloat from the zip file. Your zip is fine, it's just when I modify it that it's giving me a problem. I'm not using the MD5 file, so it shouldn't affect anything. Also, I don't think it should let me get 80% done with the install before it breaks only because of some deleted files.
IceDragon59 said:
Your zip works now. What was the problem?
Also, I've always been able to edit ROM zips and delete and add apks without any issue, but I can't now with this one. It keeps giving me the status 7 error about 80% through the install when all I do is delete some Verizon bloat from the zip file. Your zip is fine, it's just when I modify it that it's giving me a problem. I'm not using the MD5 file, so it shouldn't affect anything. Also, I don't think it should let me get 80% done with the install before it breaks only because of some deleted files.
Click to expand...
Click to collapse
Had to update the update-binary, and edit the mount commands in the updater-script.
Deleteing apps from /system/app in the rom zip should not affect the zip in any way. Are you just deleting them from within 7zip, or are you unziping, deleting, and then rezipping it?
Status 7 usually reffers to an error in the updater-script. Since it stoped about 80% thru, about 80% thru the updater-script is where the issue is.
cmlusco said:
Had to update the update-binary, and edit the mount commands in the updater-script.
Deleteing apps from /system/app in the rom zip should not affect the zip in any way. Are you just deleting them from within 7zip, or are you unziping, deleting, and then rezipping it?
Status 7 usually reffers to an error in the updater-script. Since it stoped about 80% thru, about 80% thru the updater-script is where the issue is.
Click to expand...
Click to collapse
Deleting them in WinZip. That's how I've always successfully done it before.
IceDragon59 said:
Deleting them in WinZip. That's how I've always successfully done it before.
Click to expand...
Click to collapse
I will try it and see if it does the same for me.
cmlusco said:
I will try it and see if it does the same for me.
Click to expand...
Click to collapse
Any luck?
IceDragon59 said:
Any luck?
Click to expand...
Click to collapse
Sorry for the long wait. Yes i can remove system apps from the zip using 7zip without issues. Make sure you also delete the apks odex file too if using the odexed rom.
cmlusco said:
Sorry for the long wait. Yes i can remove system apps from the zip using 7zip without issues. Make sure you also delete the apks odex file too if using the odexed rom.
Click to expand...
Click to collapse
Thanks so much =), honestly I am surprised updates are still being released. I really need to get to a Verizon store and snag the 4G version but I've been traveling a lot so my Blackberry has been getting a workout thanks to the international SIM support. Regardless I still use my Dinc for Google Auth (2-pass auth FTW!) and other activities everywhere (in network or not).
Fixed issues with superuser. For those who have already downloaded reflash superuser http://dinc.does-it.net/Superuser/SuperUser_3.1.1.zip thru recovery.
Trying to install. Unlocked CWM 5.0.2.0 Error 7. Bar goes full the over the full and fails.
leo72793 said:
Trying to install. Unlocked CWM 5.0.2.0 Error 7. Bar goes full the over the full and fails.
Click to expand...
Click to collapse
Did you do a full wipe or a flash over. Was there a line before the status 7, what did it say? Symlink failed, expecting # arguments, unexpected? I will have a look at it, the last test i did was with twrp.
cmlusco said:
Did you do a full wipe or a flash over. Was there a line before the status 7, what did it say? Symlink failed, expecting # arguments, unexpected? I will have a look at it, the last test i did was with twrp.
Click to expand...
Click to collapse
having pertition error :/
leo72793 said:
having pertition error :/
Click to expand...
Click to collapse
What kind of partition error?
I tested both cwm and twrp with both a flashover from stock rom 605.15 and a clean install and all worked just fine. Did you check the md5? Try redownloading.
Just got my INC back from my little sister after she upgraded and i'm excited to have this as my backup! Thanks for uploading this for everyone!
I want to offer you a little fix for those of you who actually experience this problem. On some Samsung based ROMs, some people complain about not working cameras, no matter how often they tried to install a ROM after several wipes. This error may occur in case your camera uses a different firmware.
Most people however won´t experience this error.
I´ve created a little Fix which is actually very easy to apply as a flashable zip. It was intended to be used with my Samsung Galaxy S3 ROM, it may also work with every other Samsung based ROM
Here is the link: Camera Fix for Samsung based ROMs
Simply install this file through your custom recovery
Just in case this patch should not work for everyone, leave me a comment and I´ll see what I can do :angel:
What does it do?
Sent from my CM10.3 Galaxy S3.
This fix includes one missing binary which some specific cameras require in order to be able to be used.
If you don´t have any trouble starting the camera app, using the camera, you don´t need to flash this zip Even if everything works fine and you do install this fix, it wouldn´t harm your system
habylab said:
What does it do?
Sent from my CM10.3 Galaxy S3.
Click to expand...
Click to collapse
just flashed it, doesn`t work for me unfortunately. :crying: :crying: :crying:
i have this problem you told of since a very long time and i really can't get rid of it. makes me fckn sick. i could cry on and on.
what else is possible to do? every litte hint is very much appreciated.
There are more binaries available, the one I included is a more common one. Samsung uses 2 different cameras ( Sony or Samsung ).
Does your camera work 100% with a Stock ROM ? If so, have a closer look in /data/cfw and show me what you find inside ( eg. SlimISP_xx.bin ).
Flash a Stock Firmware, make sure to copy the file and add it here as a zip file. By installing custom ROMs, your cfw folder will be empty most the time if these files are not added by the ROM itself.
g.ott said:
just flashed it, doesn`t work for me unfortunately. :crying: :crying: :crying:
i have this problem you told of since a very long time and i really can't get rid of it. makes me fckn sick. i could cry on and on.
what else is possible to do? every litte hint is very much appreciated.
Click to expand...
Click to collapse
If that fix not help you can maybe make a camera fw upgrade.
[tapatalk]printed, scanned and faxed...[/tapatalk]
hi guys,
thx a lot for your words. here is what i've done:
i just flashed a stock rom and the camera works. then i installed cf root and root explorer but /data/cfw is an empty folder. so i can`t copy anything here.
with the custom rom and the cam not working i had a file like SlimlSp00.bin (or something similar) in this particular folder but not now.
what to do now or did i misunderstand something?
Gorgtech said:
There are more binaries available, the one I included is a more common one. Samsung uses 2 different cameras ( Sony or Samsung ).
Does your camera work 100% with a Stock ROM ? If so, have a closer look in /data/cfw and show me what you find inside ( eg. SlimISP_xx.bin ).
Flash a Stock Firmware, make sure to copy the file and add it here as a zip file. By installing custom ROMs, your cfw folder will be empty most the time if these files are not added by the ROM itself.
Click to expand...
Click to collapse
Just out of curiosity, did you try to remove this file ? Maybe your camera tries to load this binary though it´s not suitable for your model. You can try to create a different folder and first copy the found bin ( just to have a spare copy ), remove SlimlSpxxx out of your data/cfw folder.
Wipe your Dalvik Cache and restart the ROM
g.ott said:
hi guys,
thx a lot for your words. here is what i've done:
i just flashed a stock rom and the camera works. then i installed cf root and root explorer but /data/cfw is an empty folder. so i can`t copy anything here.
with the custom rom and the cam not working i had a file like SlimlSp00.bin (or something similar) in this particular folder but not now.
what to do now or did i misunderstand something?
Click to expand...
Click to collapse
this idea didn't come up of course
but i just tested it. i already had my custom rom backup restored. i moved the SlimlSP_BH.bin to my ext sd, so that /data/cfw was empty, rebooted to recovery, wiped dalvik and it doesn't worked. second try i wiped cache and dalvik and it also doesn`t work.
Gorgtech said:
Just out of curiosity, did you try to remove this file ? Maybe your camera tries to load this binary though it´s not suitable for your model. You can try to create a different folder and first copy the found bin ( just to have a spare copy ), remove SlimlSpxxx out of your data/cfw folder.
Wipe your Dalvik Cache and restart the ROM
Click to expand...
Click to collapse
If your camera doesn´t work with this binary, you may need another one..and there are lots of them to try but you have to chose one which is suitable for a Sony or a Samsung camera Well, there is a easier way out if you try to upgrade your camera firmware.
Before we proceed, I need some details first, which type of camera you have in order to pick up a suitable binary.
1) Dial *#34971539#
2) pick up this option: "Phone/Cam FW Check"
3) Show me what you see
4) Chose this option: "Phone/Cam FW Write"
A short explanation :
GDxxx = Sony
ZFxxx = Samsung
g.ott said:
this idea didn't come up of course
but i just tested it. i already had my custom rom backup restored. i moved the SlimlSP_BH.bin to my ext sd, so that /data/cfw was empty, rebooted to recovery, wiped dalvik and it doesn't worked. second try i wiped cache and dalvik and it also doesn`t work.
Click to expand...
Click to collapse
alright, i for sure will give you every information you need.
under "phone/cam fw ver check" i see
rear camera
cam fw ver: GDF
phone fw ver: GDFI02
front camera
cam&phone fw ver: S5K6A3
"Phone/Cam FW Write" isn't available in that form. options with "write" are only "phone to cam fw write (rear)" (but this is greyed out so i can't touch it) and "fw write count".
Gorgtech said:
If your camera doesn´t work with this binary, you may need another one..and there are lots of them to try but you have to chose one which is suitable for a Sony or a Samsung camera Well, there is a easier way out if you try to upgrade your camera firmware.
Before we proceed, I need some details first, which type of camera you have in order to pick up a suitable binary.
1) Dial *#34971539#
2) pick up this option: "Phone/Cam FW Check"
3) Show me what you see
4) Chose this option: "Phone/Cam FW Write"
A short explanation :
GDxxx = Sony
ZFxxx = Samsung
Click to expand...
Click to collapse
hi gorgtech, are you still here?
I´m still here but I´m not quite sure how to help you out. There is another way to enforce an upgrade of your Firmware but I´m not sure if this would work out for everyone.
I´ll see what I can do later and prepare a zip file for you
g.ott said:
hi gorgtech, are you still here?
Click to expand...
Click to collapse
Gorgtech said:
I want to offer you a little fix for those of you who actually experience this problem. On some Samsung based ROMs, some people complain about not working cameras, no matter how often they tried to install a ROM after several wipes. This error may occur in case your camera uses a different firmware.
Most people however won´t experience this error.
I´ve created a little Fix which is actually very easy to apply as a flashable zip. It was intended to be used with my Samsung Galaxy S3 ROM, it may also work with every other Samsung based ROM
Here is the link: Camera Fix for Samsung based ROMs
Simply install this file through your custom recovery
Just in case this patch should not work for everyone, leave me a comment and I´ll see what I can do :angel:
Click to expand...
Click to collapse
about time someone done this! thanks! i thought i corrupted the drivers, but thats for the fix!
Dude, brilliant, this works on KitKat roms also, I have spread the word and linked your thread to the benefit of all.
Thank you
Sent from my GT-I9300
does this really work? can someone add it to aosp code then? @XpLoDWilD @CarbonDev
ayoubij said:
does this really work? can someone add it to aosp code then? @XpLoDWilD @CarbonDev
Click to expand...
Click to collapse
Well it works perfectly for me, but @Moster2 says the md5 checksum is identical to the files already in place, but it works. I'm both happy but mildly confused! If you get the issue it's obviously with trying! You only need to flash the rom to remove it, so it's of no concern to try
Sent from my GT-I9300
metalgearhathaway said:
Well it works perfectly for me, but @Moster2 says the md5 checksum is identical to the files already in place, but it works. I'm both happy but mildly confused! If you get the issue it's obviously with trying! You only need to flash the rom to remove it, so it's of no concern to try
Sent from my GT-I9300
Click to expand...
Click to collapse
I'm wrong, this method went wayward for me in the end :banghead:
Sent from my GT-I9300
metalgearhathaway said:
I'm wrong, this method went wayward for me in the end :banghead:
Sent from my GT-I9300
Click to expand...
Click to collapse
Damn!
Sent from my Linaro SM'd CM11 Galaxy S3, with Archi's kernel. A proud Googy Beta tester.
Well done. Works perfectly.
I tried just about everything I could find regarding fixing the camera in my S3, including manually replacing the Camera2.apk and this is the first fix I tried that actually works. Thanks for putting the time and effort in to solve this annoying problem.
Unable to install MIUI v5 by sijav.
I am LB with 4.2.2(ROOTED) and XZDUALRECOVERY
I am getting boot-loop.
Followed the instructions perfectly as per said.
NOT A NEWBIE!
Same to me…my phone(c5502) also unable to flash the rom…following all the instruction and even redownload the file also no luck…(ps:my xperia arc s or xperia v just one flash than done)but still u can try the MIUI apps called "Miui Express",just feel like using miui rom.This apps include launcher, contact, message, phone, lockscreen even themes too~
Sent from my C5502 using XDA Premium 4 mobile app
Joncat24 said:
Same to me…my phone(c5502) also unable to flash the rom…following all the instruction and even redownload the file also no luck…(ps:my xperia arc s or xperia v just one flash than done)but still u can try the MIUI apps called "Miui Express",just feel like using miui rom.This apps include launcher, contact, message, phone, lockscreen even themes too~
Sent from my C5502 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks for reply. Can you post on sijav's thread? I am not able to post there because I joined here recently!
Daedroza said:
Thanks for reply. Can you post on sijav's thread? I am not able to post there because I joined here recently!
Click to expand...
Click to collapse
what?
you're getting bootloop? @Daedroza and @Joncat24 what version did you flashed?
I have got feedback that this works, I also my self flashed with every possible options!
ALSO did you come from 4.2.2? if not wait I'm making a package ftf for you guys to flash and it will works
instruction in main thread updated.
sijav said:
what?
you're getting bootloop? @Daedroza and @Joncat24 what version did you flashed?
I have got feedback that this works, I also my self flashed with every possible options!
ALSO did you come from 4.2.2? if not wait I'm making a package ftf for you guys to flash and it will works
instruction in main thread updated.
Click to expand...
Click to collapse
Yup...downgrade to 4.2.2, root and also install recovery.Both 4.6.6 and 4.5.23...i'm even go to ur Miui forum to redownload the file but still same get bootloop wont boot...4.5.23 english and multi language also tried...if I select full wipe (in aroma),install till 40% than black out...(bootloop).The new 4.6.6, successfull install (if I select full wipe in aroma option, it happen same as 4.5.23)but the rom can't get root permission...showing system ui fc and the network operators showing wrong networking...if I reselect the network operators it show correct operators but the name just won't show the correct one that I had selected...
Ps:both before installing the rom i'm already full wipe the phone by myself coz if I select full wipe in aroma option it will cause bootloop...
Sent from my C5502 using XDA Premium 4 mobile app
sijav said:
what?
you're getting bootloop? @Daedroza and @Joncat24 what version did you flashed?
I have got feedback that this works, I also my self flashed with every possible options!
ALSO did you come from 4.2.2? if not wait I'm making a package ftf for you guys to flash and it will works
instruction in main thread updated.
Click to expand...
Click to collapse
Thanks for reply sijav.
I used 4.2.2 customised INDIA as base rom. I installed root then recovery. I flashed your 4.6.6 MIUI file. Did clean wipe in Aroma installer also. After the process ended the phone booted with sony logo then MIUI logo and then restarted again(bootloop)
***I will try this again in next 24 hours And will post the results here. Thanks for your work
Sent from my C5502 using XDA Free mobile app
If I'm not mistaken, if you're on locked bootloader you should first format system through recovery then install miui rom, it was the same way in locked Arc S
Sent from my C5502 using XDA Free mobile app
@sijav also if you are uploading your own 4.2.2 ftf can you please upload it on google drive?
It would be a great relief if you could upload all your further builds on google drive and share it here. Gives more 2mb/s speed so we could tell you instantaneously the build is flawless or not.
Sent from my C5502 using XDA Free mobile app
Daedroza said:
@sijav also if you are uploading your own 4.2.2 ftf can you please upload it on google drive?
It would be a great relief if you could upload all your further builds on google drive and share it here. Gives more 2mb/s speed so we could tell you instantaneously the build is flawless or not.
Sent from my C5502 using XDA Free mobile app
Click to expand...
Click to collapse
hi, @Joncat24 this is really strange! both things, network wrong? I'm not sure! everything is working here, system ui fc? you don't have root access? can you give me logcat? else I can't do anything because everything is working with me and I'm not sure about your problems so please give me logcat.
System will format on aroma before installing so you no need to do that!
alright here's my theory: I'm assuming that you all have tried with philz touch recovery, maybe the philz touch recovery is not good! (as you can't flash latest cm with it!!) please use ClockWorkMod (the vanilla recovery) from NDR Utils app and give me the results. it should work after that!
oh and forget everything about 4.2.2! I can't get access to my old 4.2.2 ftf file anymore! sorry I can't upload anything... and about uploading in google drive, well google drive has banned my whole account many times because many users have downloaded huge files. So I'm trying not to put anything on google drive. also my upload speed is less than 14 kbps so I'm not just posting things on net without testing it with every aspect myself! (As I hate to spend more than 1 day to upload it again) so even if you tell me that my build is broken even if I fixed it it makes me 2 days in avarage to upload both eng and multi rom into servers.
sijav said:
hi, @Joncat24 this is really strange! both things, network wrong? I'm not sure! everything is working here, system ui fc? you don't have root access? can you give me logcat? else I can't do anything because everything is working with me and I'm not sure about your problems so please give me logcat.
System will format on aroma before installing so you no need to do that!
alright here's my theory: I'm assuming that you all have tried with philz touch recovery, maybe the philz touch recovery is not good! (as you can't flash latest cm with it!!) please use ClockWorkMod (the vanilla recovery) from NDR Utils app and give me the results. it should work after that!
oh and forget everything about 4.2.2! I can't get access to my old 4.2.2 ftf file anymore! sorry I can't upload anything... and about uploading in google drive, well google drive has banned my whole account many times because many users have downloaded huge files. So I'm trying not to put anything on google drive. also my upload speed is less than 14 kbps so I'm not just posting things on net without testing it with every aspect myself! (As I hate to spend more than 1 day to upload it again) so even if you tell me that my build is broken even if I fixed it it makes me 2 days in avarage to upload both eng and multi rom into servers.
Click to expand...
Click to collapse
No problem. Going to try this with Vanilla CWM. If any one wants Google Drive FTF links I shall upload it for them.
Will post the result in three hours thanks sijav.
BTW which version of recovery? 6.0.4.5 right?
Result.
Result :
Flashed fresh 4.2.2 Customized India FTF. Installed SuperSU ROOT. Flashed XZDUALRECOVERY. Selected 6.0.48 CWM-Based recovery as told.
Selected the zip to be flashed. Selected Full Wipe in AROMA!
Installation started > Stopped at 1% > Device restarted and stopped at SONY LOGO.
I am on locked boot loader and I think that's what the problem is!
- NEW
Used PhilzTouch Recovery > INSTALL Complete.
I clean wiped then clicked on INSTALL NEW ROM, which again clean data, cache. Seems to work with one bug "ALL CHECK POINTS REACHED". It is not going from my Notifications menu!
Daedroza said:
Result :
Flashed fresh 4.2.2 Customized India FTF. Installed SuperSU ROOT. Flashed XZDUALRECOVERY. Selected 6.0.48 CWM-Based recovery as told.
Selected the zip to be flashed. Selected Full Wipe in AROMA!
Installation started > Stopped at 1% > Device restarted and stopped at SONY LOGO.
I am on locked boot loader and I think that's what the problem is!
Click to expand...
Click to collapse
EXACT same results. I fear though that if i unlock my bootloader and MIUI fails again, PCC won't be able to rescue me with firmware repair! :crying:
C5502 with root (TowelRoot method), XZdualRecovery, stock 4.3 (waiting to go back down to 4.2.2 INDIA release again). Any hints on how to fix this? Am really interested in trying MIUI, but if Xperia ZL roms work perfectly, then i'd like to try one of those...if there's one as interesting as MIUI
Did you try to format system partition?
Adiyel said:
EXACT same results. I fear though that if i unlock my bootloader and MIUI fails again, PCC won't be able to rescue me with firmware repair! :crying:
C5502 with root (TowelRoot method), XZdualRecovery, stock 4.3 (waiting to go back down to 4.2.2 INDIA release again). Any hints on how to fix this? Am really interested in trying MIUI, but if Xperia ZL roms work perfectly, then i'd like to try one of those...if there's one as interesting as MIUI
Click to expand...
Click to collapse
Yes. Use PhilZ, don't select Everything Wipe in Aroma and try installing.
If possible try installing twice! mine worked at second instance!
PROBLEM IS WITH RECOVERY AND NOT MIUI!
Daedroza said:
Yes. Use PhilZ, don't select Everything Wipe in Aroma and try installing.
If possible try installing twice! mine worked at second instance!
PROBLEM IS WITH RECOVERY AND NOT MIUI!
Click to expand...
Click to collapse
damn! you were right,
formating data partition seems not a good idea in philz recovery!!
I'm gonna remove wipe in aroma and let users do it for next release OR find a way to remove things from data manually
thanks a lot for letting me know about this one.
have fun guys
Finally
sijav said:
hi, @Joncat24 this is really strange! both things, network wrong? I'm not sure! everything is working here, system ui fc? you don't have root access? can you give me logcat? else I can't do anything because everything is working with me and I'm not sure about your problems so please give me logcat.
System will format on aroma before installing so you no need to do that!
alright here's my theory: I'm assuming that you all have tried with philz touch recovery, maybe the philz touch recovery is not good! (as you can't flash latest cm with it!!) please use ClockWorkMod (the vanilla recovery) from NDR Utils app and give me the results.
Click to expand...
Click to collapse
YES!!! Finally...finally i had successful to flash Miui on my Xperia ZR!!:good:Actually i was already want to give up...but lucky i did give up... I just try not to use Philz Touch recovery...it works!! U are right...is the recovery problem...but my Xperia V was successful install the rom by using Philz Touch recovery...thats strange... I just use ClockWorkMod to flash and before flash the rom, i just wipe cacheand format system and it works...even i had mentioned before that all the problem all gone~~ :good::laugh: thanks~
just like the title say . The screeshot
with installing screen is the main problem, the text in that screenshot mean app hasnt installed (not only this apk but other many ones ,include theme for cm12)
Nevertheless,i have try every way which may cause this issuse like wipe, boot whithout sdcard …things like this, but it was useless .
Below is my version pic (actually,this is my first time flash rom、kernel, i still have something not sure . for instance , i flash my kernel by extracted boot.img from "cm-12-20150112-INFECTED-yuga based" in fastboot mode , then use recovery to restore cm-12-20150112-INFECTED-yuga based.zip , i am suspecting that if there have any wrong procedure )
thank you guys very much for help me this
Yitnspire said:
just like the title say . The screeshot
with installing screen is the main problem, the text in that screenshot mean app hasnt installed (not only this apk but other many ones ,include theme for cm12)
Nevertheless,i have try every way which may cause this issuse like wipe, boot whithout sdcard …things like this, but it was useless .
Below is my version pic (actually,this is my first time flash rom、kernel, i still have something not sure . for instance , i flash my kernel by extracted boot.img from "cm-12-20150112-INFECTED-yuga based" in fastboot mode , then use recovery to restore cm-12-20150112-INFECTED-yuga based.zip , i am suspecting that if there have any wrong procedure )
thank you guys very much for help me this
Click to expand...
Click to collapse
Use a more updated version of cm12
Go to the CM12 thread and go to comments and check some people have ported the updated version like 2412015 and various Valdius based ROM.
Use that and with same KERNEL boot IMG
Regarding installing APK, I think if you update to these version it will get fixed!
I couldn't get what really the problem is
Sent from my Xperia ZR using XDA Free mobile app
Yitnspire said:
just like the title say . The screeshot
with installing screen is the main problem, the text in that screenshot mean app hasnt installed (not only this apk but other many ones ,include theme for cm12)
Nevertheless,i have try every way which may cause this issuse like wipe, boot whithout sdcard …things like this, but it was useless .
Below is my version pic (actually,this is my first time flash rom、kernel, i still have something not sure . for instance , i flash my kernel by extracted boot.img from "cm-12-20150112-INFECTED-yuga based" in fastboot mode , then use recovery to restore cm-12-20150112-INFECTED-yuga based.zip , i am suspecting that if there have any wrong procedure )
thank you guys very much for help me this
Click to expand...
Click to collapse
You cannot flash the downloaded Yuga Infected update on to you ZR mate,, ZR is Dogo..
Head over to Xenius9's thread and download the dogo port infected build from there. There are also instructions on how to update the dogo ported cm 12 there..
What's working: ril(calls, sms, mobile data for both SIMs), wifi, bluetooth, camera, torch, advanced power menu, hardware rendering, settings, Superuser.
This Cyanogenmod 11 is ported for Huawei Y560-U02, chipset sc7731g, platform sc8830.
This ROM is suitable for daily use.
Copy to microSD card Cyanogenmod 11 ROM. Reboot to recovery (TWRP).
Wipe (without rm-rf): dalvik cache, data, cache. Flash Rom through TWRP. After flashing - factory reset.
Reboot system, setup sim cards. Check APN. If it is not written, write it yourself. Done.
ROM :
https://drive.google.com/file/d/1DblNqOz3aTjLjTwicMsJuJrEWS3b8KtK/view?usp=sharing -
signed_cm11_core33g
Fix wifi_hotspot :
https://drive.google.com/file/d/1RqjwXgd17EpShiNcmdB5CBLIr02vNEIt/view?usp=sharing
Flash wifi_hotspot zip file via TWRP.
TWRP 3.0.2-0_en:
https://drive.google.com/file/d/1vJOnjEBEIkwAqtoAfd6tAL7msnAgEjbn/view?usp=sharing
Open es file explorer , go to device/efs/imei/imeino1 and imeino2 , write your imei numbers.Reboot. Calls and sms will works without this, but better to write your imei numbers.
Gapps:
https://drive.google.com/file/d/0B1MnFzuGjoAPMXZxcktublh0clk/view?usp=sharing
Do it on your own risk.
Injoi! View attachment 5175015
Gapps for this?
Hello, I managed to flash this properly, thanks a lot.
Any suitable gapps?
Otaku780 said:
Hello, I managed to flash this properly, thanks a lot.
Any suitable gapps?
Click to expand...
Click to collapse
Welcome
Gapps:
https://drive.google.com/file/d/0B1MnFzuGjoAPMXZxcktublh0clk/view?usp=sharing
Sims stuck on 2G
For some reasons I can't enable 3G, I've entered my APN manually and edited the imei values to match the old ones, still stuck on 2G.
There used to be an option in the stock rom to choose which SIM gets the 3G and which sticks with 2G, didn't find it here.
Also I can't set the screen brightness to auto, is this happening with everyone or just me?
Otaku780 said:
For some reasons I can't enable 3G ...
Click to expand...
Click to collapse
In our phones 3G(and lower) works only in first slot for sim card. Second slot uses only 2G(and lower).
In first slot set your sim card, that you need for 3G, and then write APN.
Same to do with your second slot and second sim card. Done.
Auto brightness doesn't work. I don't know why... I never used it, sorry...
Wifi hotspot?
Hello, thank you for your reply, but I'm yet to be able to enable 3G (2G works fine tho), and I've noticed that I can't enable the Wifi hotspot, as soon as the slider is enabled, it goes back off (pretty much like the 3G thing).
So I'm guessing there is something wrong with my setup? I used TWRP 2.8.7.0 but I don't see how it allows things to work and others not to, can it be the reason? And would flashing it again make it work (with the Gapps you provided, I'm having google store issues).
Thanks in advance.
Otaku780 said:
Hello
Click to expand...
Click to collapse
Hello. This gapps from thread:[ROM][4.4.4][UNOFFICIAL][SM-G360H] CyanogenMod 11 for Samsung Galaxy Core Prime , there i have ported ROM. I don't like gapps and don't use it.
3G(in first slot) works perfectly for me, why you have issues?.. It's strange...
You can to use TWRP 3.0.2-0 from this thread, but i don't think that it will solve problem...
Backing up and trying again
I'm thankful for all of your hard work, I am backing up and will flash again (cm_11 and gapps) and will see what happens.
I'm interested if other roms for Samsung Core prime would work for this phone, since you ported the 4.4.4, can the 5.1.1 and / or other versions be ported here as well? I'd like to have the latest update possible for this phone.
Otaku780 said:
I'm interested if other roms for Samsung Core prime would work for this phone, since you ported the 4.4.4, can the 5.1.1 and / or other versions be ported here as well? I'd like to have the latest update possible for this phone.
Click to expand...
Click to collapse
Hello and thank you!
For 5.1.1 we haven't kernel... When i have ported ROM, also ported boot.img, replaced split_img(zImage, dtb, etc) and have changed some thing in ramdisk. This phone still haven't update to 5.0, that we will can to use boot.img for porting... So, we can't to port any ROM higher 4.4.4
All this is very sad...
Also,it's very important, need to have bigger knowledge and experience, than i have
Deleted
What's the difference?
amiro13 said:
Forgot...
I have ported also one cm11 ROM, from here :
https://forum.xda-developers.com/ga...cyanogenmod-11-samsung-galaxy-core-2-t3308697
You can to try it :
https://drive.google.com/file/d/1IgEv7xcrageSnbD1RsiroZUv4g_edyX3/view?usp=sharing - signed_cm11_kanas
For now, i use this ROM.
Click to expand...
Click to collapse
What's the difference between the signed rom that's available for download and the one called Kanas, the one you said you are using right now ( I am not using it), which one is better, and why so?
Is there a change log?
Update
Otaku780 said:
What's the difference between the signed rom that's available for download and the one called Kanas, the one you said you are using right now ( I am not using it), which one is better, and why so?
Is there a change log?
Click to expand...
Click to collapse
I've flashed Kanas on my phone and back to the old one, it's a bit bigger and has an Alarm and calculator by default, but I still have the same hardware issues: No wifi hotspot, no 3G. So I'll stick to the TWRP backup that has all my settings and data for now, appreciate all the help.
Otaku780 said:
I've flashed Kanas on my phone and back to the old one, it's a bit bigger and has an Alarm and calculator by default, but I still have the same hardware issues: No wifi hotspot, no 3G. So I'll stick to the TWRP backup that has all my settings and data for now, appreciate all the help.
Click to expand...
Click to collapse
Wifi hotspot - fixed.
Good luck
Hi...I have ported this rom for my device. It also runs the same chipset(ie sc7731). But the camera isn't working. How to fix it. Please help...!!
[email protected] said:
... But the camera isn't working. How to fix it. Please help...!!
Click to expand...
Click to collapse
Hi
I have fixed the camera with this guide. Try it.
Good luck
amiro13 said:
Hi
I have fixed the camera with this guide. Try it.
Good luck
Click to expand...
Click to collapse
Thanks but I have already tried that... didn't work for me..
[email protected] said:
Thanks but I have already tried that... didn't work for me..
Click to expand...
Click to collapse
Ok...
Try this zip:
https://drive.google.com/file/d/0B1MnFzuGjoAPSVJ4Q3dSMUViSHc/view?usp=sharing mod_AIO
Flash zip file via TWRP.
If this does not work, extract the zip file and replace in the lib folder all libcamera..... .so files with your stock files. This is a zip file for fixing Ril, Camera, Bluetooth ...
In the hw folder, libcamera.sc8830.so and libcamera2.sc8830.so files already is modified .
amiro13 said:
Ok...
Try this zip:
https://drive.google.com/file/d/0B1MnFzuGjoAPSVJ4Q3dSMUViSHc/view?usp=sharing mod_AIO
Flash zip file via TWRP.
If this does not work, extract the zip file and replace in the lib folder all libcamera..... .so files with your stock files. This is a zip file for fixing Ril, Camera, Bluetooth ...
In the hw folder, libcamera.sc8830.so and libcamera2.sc8830.so files already is modified .
Click to expand...
Click to collapse
Thanks a lot....I will surely try that. :good:
[email protected] said:
Thanks a lot....I will surely try that. :good:
Click to expand...
Click to collapse
Maybe will to need libcamera.sc8830.so and libcamera2.sc8830.so files from your stock rom. They must to be modified, like written in guide.
Wish you good luck :good:
amiro13 said:
Maybe will to need libcamera.sc8830.so and libcamera2.sc8830.so files from your stock rom. They must to be modified, like written in guide.
Wish you good luck :good:
Click to expand...
Click to collapse
Thanks a lot...it just worked actually I was doing it wrong for the hole time but I did it... thanks man. But few other problems that were not before are now there like
2 sims not working...
Wifi not enabling...
And many more but thankfully I got some fixes for those from romclaims....!!! But again I must say thanks for your help.