Database Develop

Class 0 Text message App?

Hello,
Do you guys know if there is an app that allows to send class 0 sms aka flash SMS?
There is only 1 app on the market that does it but it FC all the time.

On T-Mobile in the UK you can do this by just starting a regular SMS with two exclamation marks. I'm not sure if this would work on other networks or in other countries but try sending...
Code:
!!Test Message
as an SMS to yourself and see what happens.

I juste tried your trick but it doesn't work here (Orange FR).
According to the 3GPP TS 23.038 spec:
Code:
General Data Coding indication
Bits 5..0 indicate the following:
Bit 5, if set to 0, indicates the text is uncompressed
Bit 5, if set to 1, indicates the text is compressed using the compression algorithm defined in 3GPP TS 23.042 [13]
Bit 4, if set to 0, indicates that bits 1 to 0 are reserved and have no message class meaning
Bit 4, if set to 1, indicates that bits 1 to 0 have a message class meaning::
Bit 1 Bit 0 Message Class
0 0 Class 0
0 1 Class 1 Default meaning: ME-specific.
1 0 Class 2 (U)SIM specific message
1 1 Class 3 Default meaning: TE specific (see 3GPP TS 27.005 [8])
Is it possible to modify thoses parameters in Android?

bump !bump !

Such applications exist for Symbian and Winmobile.
Unfortunately not for android.
I wish I had the skills to create such an app
HushSMS for WinMo
SysSMS for symbian

also looking for a app for sending Ping SMS too (or Type 0)

Flash sms
or
Advanced SMS Sender can do that on android

Flash sms it best

Question about AudioRoutingManager

How to call a method SetAudioEndPoint from the class AudioRoutingManager?
I'm doing all the instructions with " msdn.microsoft.com/en-us/library/windowsphone/develop/jj207046(v=vs.105).aspx ". But when I try to call SetAudioEndPoint exception occurs "Eccess denied". What to do?
P.S. VoIP classes I do not use. ID_CAP_VOIP I added. Maybe it's because there is no active VoIP call?

Depends on the value of the enumeration you've chosen.

You can read more?
I try this:
Code:
LPCWSTR renderId = GetDefaultAudioRenderId(AudioDeviceRole::Communications);
HRESULT hr = E_FAIL;
hr = ActivateAudioInterface(renderId, __uuidof(IAudioClient2), (void**)&m_pDefaultRenderDevice);
hr = m_pDefaultRenderDevice->GetMixFormat(&m_waveFormatEx);
AudioClientProperties properties = {};
properties.cbSize = sizeof AudioClientProperties;
properties.eCategory = AudioCategory_Other;
hr = m_pDefaultRenderDevice->SetClientProperties(&properties);
WAVEFORMATEX temp;
MyFillPcmFormat(temp, 2, 44100, 16); // stereo, 44100 Hz, 16 bit
*m_waveFormatEx = temp;
m_sourceFrameSizeInBytes = (m_waveFormatEx->wBitsPerSample / 8) * m_waveFormatEx->nChannels;
hr = m_pDefaultRenderDevice->Initialize(AUDCLNT_SHAREMODE_SHARED, 0x88000000, 1000 * 10000, 0, m_waveFormatEx, NULL);
hr = m_pDefaultRenderDevice->GetService(__uuidof(IAudioRenderClient), (void**)&m_pRenderClient);
hr = m_pDefaultRenderDevice->Start();
The sound is played. But if I try to change SetAudioEndPoint an error occurs.
What's wrong?

Topic can be closed. I understood. Thank you all!

Please include an explanation of how you solved the problem so others who encounter it can find the fix!
You can then close the topic yourself if you want to, since you are the thread owner.

[Q] Adding custom text to retrived data from database

Hi,
im a beginner i have small problem i have small application build where i can add stuff to the database and read it thats working fine for me but now for example i want to be it like example the output from the database is test test but i want it like Name : test Adress : test how can i fix this.
Thank you

Splitting Text
Not sure if I've understood correctly, but are you getting a String back from the database like this: "test test"?
If so you can use the String split() command to break your String into segments. For example:
Code:
String returned = //Get String from the database
String[] split = returned.split(" ");
String name = "Name: " + split[0]; //This contains your first word
String address = "Address: " + split[1]; //This contains your second word
How are you connecting to your database? Depending on how you connect, it is possible to return just a name, or just an address, rather than all columns in a row.
For example, using HQL (Hibernate Query Language) you could write something like:
Code:
SELECT address FROM person p WHERE p.name = "Harry"
This would return all the addresses of people called Harry from the table person

Help with comparing variables

This is probably simple for a programmer, but as a newb, I am getting stuck.
I have 2 variables and I want to check if the first is contained in the second
so, %event = Phone and %check = WorkPhoneReport
I have tried :
*%event* ~ %check
*%event* ~R %check
*%event\* ~ %check
And several other similar patterns. What to do to get this test working?
I am trying to read my calendar and not process the same event a second time. So, each item it reads is appended to another variable, then on its next loop, it compares the new event to the check variable to see if it was processed already. Don't know if I should be using an array instead of a variable, and if I can use an array in a if/then statement....
Any help is appreciated!!

Figured out a way.
Variable Search and Replace:
Variable %check Search %event store in %matches
then in the if statement just check if %matches is set.
If there's a simpler way, please let me know, this task is at 50 commands, never hurts to shorten it.

Code:
%check ~R .*%event.*
In Regex format, dot (.) can be any character including having no character there, and star (*) means repeat previous character as much as possible.
So .* means "look for no character or any number of any characters", and .*%event.* means "look for %event with something or nothing before it, and something or nothing after it"

MMAL error, failed to enable port

HI, I have this issue of not being able to connect to my Rpi camera, which is for home security use.
I think the problem may be that more than one process is trying to connect to the camera at the same time, but:
1. How can I find out which processes may be trying to connect?
2. How can I disable /delete those processes?
This is my alarm.py code. I think it's from this site: https://circuitdigest.com/microcontroller-projects/raspberry-pi-iot-intruder-alert-system
Code:
#!/usr/bin/env python3
import RPi.GPIO as gpio
import picamera
import time
import smtplib
from email.MIMEMultipart import MIMEMultipart
from email.MIMEText import MIMEText
from email.MIMEBase import MIMEBase
from email import encoders
from email.mime.image import MIMEImage
fromaddr = "email_address" # change the email address accordingly
toaddr = "to_another_email_address"
mail = MIMEMultipart()
mail['From'] = fromaddr
mail['To'] = toaddr
mail['Subject'] = "Attachment"
body = "Please find the attachment"
led=17
pir=18
HIGH=1
LOW=0
gpio.setwarnings(False)
gpio.setmode(gpio.BCM)
gpio.setup(led, gpio.OUT) # initialize GPIO Pin as outputs
gpio.setup(pir, gpio.IN) # initialize GPIO Pin as input
data=""
def sendMail(data):
mail.attach(MIMEText(body, 'plain'))
print data
dat='%s.jpg'%data
print dat
attachment = open(dat, 'rb')
image=MIMEImage(attachment.read())
attachment.close()
mail.attach(image)
server = smtplib.SMTP('smtp.gmail.com', 587)
server.starttls()
server.login(fromaddr, "make_password")
text = mail.as_string()
server.sendmail(fromaddr, toaddr, text)
server.quit()
def capture_image():
data= time.strftime("%d_%b_%Y|%H:%M:%S")
camera.start_preview()
time.sleep(5)
print data
camera.capture('%s.jpg'%data)
camera.stop_preview()
time.sleep(1)
sendMail(data)
gpio.output(led , 0)
camera = picamera.PiCamera()
camera.rotation=0
camera.awb_mode= 'auto'
camera.brightness=55
while 1:
if gpio.input(pir)==1:
gpio.output(led, HIGH)
capture_image()
while(gpio.input(pir)==1):
time.sleep(1)
else:
gpio.output(led, LOW)
time.sleep(0.01)
Thanks!