Hi everyone! I have a xperia sp locked BL, recoveries installed. Last night I installed a rom and get bootloop. The phone automatically reboots but I can't see flashlight to get into recoveries and stucks at Sony logo. I pressed the OFF button at the back, the phone reboots and stucks at sony logo again. i cant connect it to flastool also. please help me what to do next
I read something on google but i forgot how to do it exactly :s Tried reinstall with pc companion? Though I don't know if that would work and I don't want to be responsible for bricking ur phone :/ So i guess google "Xperia SP bootloop" :s
patilsangu said:
Hi everyone! I have a xperia sp locked BL, recoveries installed. Last night I installed a rom and get bootloop. The phone automatically reboots but I can't see flashlight to get into recoveries and stucks at Sony logo. I pressed the OFF button at the back, the phone reboots and stucks at sony logo again. i cant connect it to flastool also. please help me what to do next
Click to expand...
Click to collapse
Have you tried to connect to pc, and type adb reboot recovery (with adb installed on pc)?
Firstly download and install minimal adb
Download doomlord's adb drivers..
Then if on windows 8
Disable driver signature enforcement and then install the adb drivers in doomlord's thread.
(Fast boot drivers, flashmode drivers and viskan drivers)
Then extract boot.img of your favourite ROM (which has a recovery) and copy paste it in the folder where you installed minimal adb.
First connect the USB cable to the PC.
Restart your phone by hard reset and as soon as it shows Sony logo, keep pressing power button plus volume down.
Now a blue light will be coming.
Then
Hold shift and right click there and open command promt here..
Make sure the blue light is still there in the illumination bar and type in
fastboot flash boot boot.img
This will install a new boot.img which has a recovery
And then restart
Then go into recovery and flash your favourite ROM...
Hope I helped..
This method worked for me many times...
Related
hello all.
i was using Modified rooted ROM and today i restarted my phone to CWM and made a Factory reset and Full data wipe. i wiped everything except the SD Card (because i downloaded another ROM on the SD)
BUT the Problem is that i accidentally Rebooted my phone to (systme Reboot) before i install the NEW ROM and now the phone stuck at SONY logo. i tried to connect my phone to Flash Tool but nothing happened (i see the Blue LED but i see also this message)
05/008/2014 16:08:57 - ERROR - Drivers need to be installed for connected device.
05/008/2014 16:08:57 - ERROR - You can find them in the drivers folder of Flashtool.
i installed all the drivers from the that folder and still the same
tried to Reboot Phone with holding Volume UP button (to access CWM again) but nothing happened
i want to Flash any ROM right now. please help me
i tried fastboot command to flash CWM again and it stuck at <waiting for Device>
please guys reply , im steaming
First error tell you everything.
You need to install drivers.
Sent from my C6903 using XDA Free mobile app
Use pccompanion to repair your phone and start again.
If you have unlocked the bootloader, then just flash a FTF using flashtool, use flashmode (Green LED) not fastboot (Blue LED)
Done
SOLVED
aaaah, drivers installation in windows 8 is suck
done with windows 7 because of the drivers is unsigned
for windows 8 users Do this before rooting or doing anything
http://www.howtogeek.com/167723/how...8.1-so-that-you-can-install-unsigned-drivers/
Please excuse me if I'm repeating a prior question but it seems far too specific to trawl through pages of related threads to make sure.
I decided I was going to sit down and root my Xperia Z1....
Steps:
1. I installed ADB and Fastboot via the latest windows Android SDK (r23-.0.2), in fact I had to source a sony version of the fastboot driver in order to get it working but once I'd done that all went ahead as planned.
2. Generally followed this guide (wont let me post a link but google "honami cyanogenmod" and it's the 2nd result)
3. All was going swimmingly, I entered fastboot mode absolutely fine, flashed CWM using fastboot which all loaded up absolutely fine.
3. At this stage ADB was not picking up my device at all, tried different cables, ports, all of the usual. What I didn't do was make a backup, and then I wiped all of the things that it's possible to wipe thinking to myself that I was going to get Cyanogenmod on there so all would be fine...
4. Finally I (quite stupidly) restored from memory card (which had already been wiped) from inside CWM, the device restarted and now I am getting no response AT ALL.
5. Sometimes it will load the Sony 'splash' logo that first appears but sometimes not, when plugged in the device is recognised and ADB actually sees the device but lists it as offline... Interestingly at this stage windows device installer actually installs Sony ADB driver for me automatically.
6. All I'm getting at the moment is a red flashing LED although when I plug in via USB the device is again recognised when I type adb devices but again is offline...
If any more information is needed please, I will be more than happy to give a quick reply.
Thank you in advance
JJrmc said:
I decided I was going to sit down and root my Xperia Z1....
Steps:
1. I installed ADB and Fastboot via the latest windows Android SDK (r23-.0.2), in fact I had to source a sony version of the fastboot driver in order to get it working but once I'd done that all went ahead as planned.
2. Generally followed this guide (wont let me post a link but google "honami cyanogenmod" and it's the 2nd result)
Click to expand...
Click to collapse
Were you trying to root your phone or install cyanogenmod? You followed a guide to install cyanogenmod on xperia Z1.
AkiraProject said:
Were you trying to root your phone or install cyanogenmod? You followed a guide to install cyanogenmod on xperia Z1.
Click to expand...
Click to collapse
I was trying to end up with a rooted device running Cyanogenmod, I've been putting it off and off looking into the whole rooting scene and mistakenly dived in a little too quick without knowing what I was doing.
after that you move cm-11-20141112-SNAPSHOT-M12-honami.zip to your sd card. Now you have flashed boot.img you can't move zip to your sd card using z1 you had to do that before using fastboot. use some sd card adapter and do it. then put the sd card back in your phone. turn it on then enter the cwm recovery pressing Vol+ for a few seconds when the sony logo shows up. select full wipe data. then install from zip. choose cm-11-20141112-SNAPSHOT-M12-honami.zip. reboot. ADB won't work until you have installed cyanogenmod zip. You have only installed cyanogenmod kernel and custom recovery when you flashed the boot.img.
AkiraProject said:
after that you move cm-11-20141112-SNAPSHOT-M12-honami.zip to your sd card. Now you have flashed boot.img you can't move zip to your sd card using z1 you had to do that before using fastboot. use some sd card adapter and do it. then put the sd card back in your phone. turn it on then enter the cwm recovery pressing Vol+ for a few seconds when the sony logo shows up. select full wipe data. then install from zip. choose cm-11-20141112-SNAPSHOT-M12-honami.zip. reboot. ADB won't work until you have installed cyanogenmod zip. You have only installed cyanogenmod kernel and custom recovery when you flashed the boot.img.
Click to expand...
Click to collapse
Firstly AkiraProject thank you for your time on this.
I do realise that in my stupidity I could have loaded the cm-11-20141112-SNAPSHOT-M12-honami.zip to my SD card (if I'd had one or waited and gotten one).
What I did however was wipe everything I possibly could, and then hit restore from sdcard/0/ I believe - it may have been a different directory.
I believe what I have done is restored to a blank image......
WHen not plugged into usb I get a red blinking LED when just pressing the power button once.
When holding volume-up + Power the phone vibrates as if it is trying to boot but is unable to
If I leave it plugged into USB AND then press , the device shows the sony Logo and then proceeds to display a backlit but plain black screen, Sony PC Companion recognises the device as connected but is unable to interact with it. The output of "adb devices" shows my device but says "unauthorized" and windows is attempting to install MTB driver....
The behaviour doesnt seem to be quite the same every time.
I believe the device is soft bricked.... is this likely to be a case of a wiped partition table? Or at least loss of the boot partition?
If I leave the device plugged in via USB it periodically reboots itself, shows the Sony logo, remains on a bank screen then shuts itself down.
Shows in device manager as "USB Input Device" on win 7 x64 pro
Thanks in advance
Pretty certain it's not hard bricked, there will be instructions here you can follow:
http://forum.xda-developers.com/showthread.php?t=2574764
Sent from my C6903 using XDA mobile app
D33KK said:
Pretty certain it's not hard bricked, there will be instructions here you can follow:
http://forum.xda-developers.com/showthread.php?t=2574764
Sent from my C6903 using XDA mobile app
Click to expand...
Click to collapse
I have done quite a lot of reading etc on the subject....
according to This thread, Sony Xperias have the bootloader in non-writable mask ROM... so you should always be able to access Fastboot or Flash Mode?
The problem I am having is that I don't seem to be able to activate EITHER Fastboot OR Flash mode in order to flash some new firmware onto my device....
My device is recognized as a "USB Input Device" on Device Manager and windows tries to install MTP driver. I'm going to have a go at the process with a fresh install of windows 7 x64 and 'windows auto-install drivers' turned off.
What is the maximum damage I could have done here?
Thanks
Update
Hard reset (red button inside of the sim-card slot) resets the phone with three vibrates and it restarts.
The phone powers on and displays Sony splash screen and then displays a back-lit black screen.
The phone gets much hotter than normal and powers on to the blank back-lit screen when on charge.
I have NO ACCESS to flash mode or fast boot. Any combination of buttons leads to the same outcome: single vibrate, red LED and the phone shows the Sony splash screen then blank screen, as if the button combinations are just ignored...
Flashtool DOES NOT recognize the device, although it is recognized as C6903 in device manager (I have Sony adb driver installed and have disabled the MTP driver that windows recommends).
Flashtool gives me the red error text about making sure drivers are installed and making sure the device isn't in MTP mode.
I'm at an absolute loss as to what to try next, can somebody shed any light on this? There are plenty of guides but they all seem to rely on EITHER fastboot or flash mode and I can access neither although the phone powers on!
Thanks in advance!
Maybe the partition was corrupted when you flash "blank" image..........
So....JTAG....or send to Sony service....
Shutdown with power+vol up (will vibrate thrice) and see if it doesn't turn on automatically.
If it didn't turn on now check your task manager on windows, go to process tab, kill adb.exe (every adb.exe)
Back on phone connect usb holding down the vol down button (phone have to be off before you connect usb), if green led turns on and doesn't turn off you are on flashmode.
Check on flashtool or flashtool64 (for 64bits) and see if flashtool detects your device. If it detects and recognizes your phone flash the FTF for your device and let it do its job.
As you messed the phone Sony will charge for repairs.
Lately my phone cant go into boot, it just show sony logo, then the logo blured, and it back to sony logo.
I had just done install cwm with this method
How To Install Custom Recovery In Sony Xperia SP
If You Want To Root Your Device Click Here
1. Before You Begin:
Working for Sony Xperia SP with Unlocked Bootloader
Windows-based computer or laptop
Download Sony Xperia SP USB driver for Windows and install in your computer.
Skip this step if you have installed the Sony Companion.
Enable USB Debugging on your device.
Make sure your phone is charged to 60% 80% to avoid battery blackout and interruption during this tutorial.
We recommend you make a backup on your data and media files before the tutorial.
2. Download Required Files:
Kernel For Sony Xperia SP
Fastboot+ADB(20926)
3. Install Custom Recovery In Sony Xperia SP:
Unlock Bootloader of your device first.
Download & Extract the Fastboot folder from the Fastboot+ADB zip file at your desktop.
Download the Kernel_en.elf and copy it to the Fastboot>Win32 folder.
Rename the copied Kernel_en.elf to Kernel.elf
Turn Off your device completely.
Enter into fastboot mode by connecting your device to PC with USB cable while pressing Volume Up button.
Now open the Folder Fastboot>Win32 and Press & Hold Shift key and press right click of mouse and select open command window here.
A CMD window will appear on the desktop.
Type fastboot flash boot kernel.elf to flash the kernel in your device.
After the process complete turn off your device (Press & Hold Power Button)
Click to expand...
Click to collapse
And now i cant even see my home screen nor the flash mode
So what should i do now? FYI the phone is still can be connected to charger and pc, but if i trying to turn on, it go hard bootloop
Did you try flashing stock firmware using flashtool?
The only way
Quaxbond said:
Lately my phone cant go into boot, it just show sony logo, then the logo blured, and it back to sony logo.
I had just done install cwm with this method
And now i cant even see my home screen nor the flash mode
So what should i do now? FYI the phone is still can be connected to charger and pc, but if i trying to turn on, it go hard bootloop
Click to expand...
Click to collapse
It happened to me too, the only way is to flash a stock based rom through flashtool, then flash cm11 and then cm12. I suggest you to flash CrystalPA though and wait for a more stable cm12 release. CrystalPA is just the smoothest 4.4.4 rom out there, especially if you love mobile gaming, it has the best ram management!
So, the problem is that Xperia SP was working nice on Carbon 4.4.4 but then I flashed a kernel with bad WiFi module. That had a builtin TWRP (I previously had CWM and backed up everything using CWM)... then I did a really bad thing. I renamed boot.img from CWM backup to boot.emmc.win (TWRP compatible) which subsequently flashed CWM and old kernel. I forgot to restore my SYSTEM as some kernel parts are there (I knew it wouldn't work but I had plan to restore it via CWM)
Then I rebooted into recovery but it didn't reboot. Instead it showed me Sony logo and red LED. Then black screen and repeats same. I learnt how to hard reboot and it did no good. I have unlocked bootloader and I'm trying the flashtool but it won't recognize my phone (I have installed C:\Flashtool\drivers\*) on Windows 10 but it didn't do any good either.. Now when I reboot into fastboot mode it shows me blue LED but isn't detected by flashtool;
Same is with the Flash Mode. Green LED but no connection. On the notifs panel on PC It shows that device not recognized. On Device manager it shows: Unknown USB device (Device descriptor request failed)
I wanna install the drivers but they're already done. I reinstalled them twice just for surety's sake... Any suggestions to install drivers and flash the firmware? I don't know much about Sony as this is not mine, this is a free device that no one uses in my family. I own jfltexx
Edit: Whatever mode I put it in it bumps (reboots) out
Try letting the phone in flash mode and wait a bit till windows install driver automatically, or go to device manager and update unknown device driver, if this don't works, i don't know what more to do
lucasgta95 said:
Try letting the phone in flash mode and wait a bit till windows install driver automatically, or go to device manager and update unknown device driver, if this don't works, i don't know what more to do
Click to expand...
Click to collapse
I forgot to tell but if I I put it in flashmode it just shows LED for 3 seconds and turns off and starts to charge :/
This is normal on XSP, the led turn off but phone continues in flash mode
lucasgta95 said:
This is normal on XSP, the led turn off but phone continues in flash mode
Click to expand...
Click to collapse
But what about unrecognized device issue? How can I fix that?
I don't know what more to say :/
Here I just insert my device, then windows automatically recognize and install drivers, then I can use my flashtool normally
lucasgta95 said:
I don't know what more to say :/
Here I just insert my device, then windows automatically recognize and install drivers, then I can use my flashtool normally
Click to expand...
Click to collapse
Downgrading to Win7 due to non programmable GPU cores and drivers issue ...
It worked!! Flashed kernel elf file through fastboot and device booted up. Thanks mate
You're welcome
Hi xda,
After changing my phone's system language to French (from English) for a school project, I eventually rebooted my phone and now it is stuck in a boot loop. It keeps getting to a point about 5 seconds in to the blue wave animation, then freezes, and reboots again. I have tried booting it into the USB safe mode (hold Volume Up while plugging it into a computer) and I have tried to boot into recovery using ADB, it says it cannot find the device.
I believe it is running Android 4.4.1, although I cannot check this.
Any help would be greatly appreciated.
Thanks in advance.
Install adb drivers and download flashtool
From Flashtools folder find drivers folder and run exe
Check fastboot and flashmode and xperia z3 compact drlvers. Install and turn off your phone, find your ftf file select it when it asks to connect your phone hold volume down button and insert usb cable and good luck