This information pertains to the 2012 Nexus 7 models. I'm unsure what the situation is with the 2013 models.
As reported e.g. at [Q] JWR66Y nakasi factory image bootloader problem and [GUIDE] Flashing a Factory Image with fastboot / return to stock, Nexus 7 and Nexus 7 3G factory image bootloaders are corrupt, apparently since Android 4.3 JWR66Y.
A Nexus 7 3G OTA with bootloader that I downloaded and tested also contains the corrupt bootloader v4.23. The OTA in question is JWR66Y from JDQ39 linked from [REF] Nexus 7 Stock OTA URLs. The corrupt bootloader has size 2,151,068 bytes and checksums 5bdb2e87370cdb1a7ea14bb0c3e21390 (MD5) and ce2951e59da64fa57d281f47031364050c83f49c (SHA-1), instead of 2,150,992 bytes and df53028033c9eccf4fe5ba7bc198ce24 (MD5) and 7b28b45a035efb9aad9e61ad09b1906eb5508721 (SHA-1), resp.
For what it's worth, the latest Nexus 7 3G LRX22G factory image also contains the corrupt bootloader v4.23.
Related
Need to restore to factory a bootloader unlocked XT1053 however the image on Motorola's website isn't the latest updated 30.BE software. Does anybody know where I can download that?
Hi this custom rom will fix these problems
Fixing No IMEI
Fixing WiFi problems
Serial Number and Baseband fix
Bootloop Fix
FRP Lock removing
Carrier unlock and reading network info
Determining the problems are software or hardware
as i know we cannot install older version of bootloader's roms on our phone because of sboot version, at first you must know about your device sboot version.
when you install the older version rom via odin on your phone, you have maybe see this error like on bootloader mode and the rom will not install in first step of odin installation, what does it meaning of these codes?
Code:
CM SW AEV. CHECK FAIL DEVICE:3. BINARY:2
we have 2 numbers
Code:
Device:3
it showed us the boot loader version of our phone is 3
Code:
BINARY:2
it is showing us the rom bootloader version is 2
when your phone's bootloader version is higher than your rom's sboot version, it means you are downgrading your phone, and its not allowed from Samsung.
now we must have equal or higher version of firmware's sboot version over our phones.
additional information to know combination's buildnumber.
Year of release
Code:
O=2015
P=2016
Q=2017
R=2018
Month of release
Code:
A= January
B= February
C= March
D= April
E= May
F= June
G= July
H= August
I= September
J= October
K= November
L= December
Revision Numbers
Code:
1=Revision 1
2=Revision 2
3=Revision 3
4=Revision 4
5=Revision 5
6=Revision 6
7=Revision 7
8=Revision 8
9=Revision 9
A=Revision 10
B=Revision 11
C=Revision 12
D=Revision 13
E=Revision 14
F=Revision 15
Android Versions
Code:
FA80=Android 8 Oreo
FA70=Android 7 Nougat
FA60=Android 6 Marshmallow
FA51=Android 5.1 Lollipop
FA50=Android 5.0 Lollipop
FA44=Android 4.4 KitKat
FA43=Android 4.3 Jelly Bean
FAJP=Android Jelly Bean
FTMA=Tizen OS
for example:
Code:
COMBINATION_FAC_FA51_A510FXXU4AQC1
it means
FA51 means Android 5.1.
XXU4 means Binary version is 4 (firmware's sboot version)
Q means 2017
C means March
-
if this thread helped you and fixed your phone, you can donate here.
my previous works
file is uploding......
Download from mediafire
Code:
http://www.mediafire.com/file/puezzu1gnoxrs2u/%5BMJ_NAZARI%5DCOMBINATION_FAC_FA51_A510FDXXU5ARB1_FAC_CL9213193_QB17042189_REV00_user_mid_noship.tar.rar
How to Install?
1- Download Combination rom, Extract via Winrar
2- goto Bootloader mode and Connect your phone to PC, Run ODIN
3- Put it on Odin, Hit Start.
4- Let your phone starts, when your phone boots, diagnose and fix your phone through combination rom features.
5- after fixing phone, install the Stock's Samsung rom.
if your phone get fixed, please don't forget to donate.
best regards
Could some one please point me to a full stock image for the with the Oreo rom for the reteu release channel?
I have a moto 5gs plus here that does not want to do the OTA update to oreo 8.1 the phone has an unlocked bootloader but unmodifyed system/boot.
So I thought i just wil go with installing a full stock 8.1 image.
but the images i can fund does not say if they are for my release channel which is reteu,
does that even matter or can i just install the file from here: https://forum.xda-developers.com/moto-g5s-plus/how-to/tutorial-fhash-oreo-8-1-stock-global-t3852967
any advice would be greatly appreciated
You can use the one you mentioned. I did, on an XT1805. System info still shows reteu as software channel after flashing.
Did you run all the commands from the thread including erasing the data partition?
Or what was your update procedure?
I followed the commands, except erasing the data partition (the OTA for Oreo also didn't do that). I also skipped flashing logo and bootloader. I have the bootloader unlocked, and the logo was replaced to remove the unlocked bootloader warning.
(I flashed the ROM to see if that would solve an issue I had after the OTA upgrade to Oreo.)
These are the OTA update files released for the Nokia 5 TA-1044.
NOTE: These files have been captured from a Nokia 5 (TA-1044). Not sure if these will work on other variants or not.
April 2018
https://android.googleapis.com/pack.../1de13b9e8366cf6220f162af9d4b6213e87ee257.zip
May 2018
https://android.googleapis.com/pack.../c5d80ae83f99cce1a81636dd88abcc75ec771252.zip
June 2018
https://android.googleapis.com/pack.../fe40148e4bf1264c99aa6a53184c84f27fabdda7.zip
July 2018
https://android.googleapis.com/pack.../4a79f44cd199b2851533409e461cc46897f62990.zip
This one may be used to downgrade the bootloader and then unlock it ($ 5) to root the device
my 1044 in stuck on this july update. do you have next months links?
josefrancklin said:
my 1044 in stuck on this july update. do you have next months links?
Click to expand...
Click to collapse
https://www.nokia.com/phones/en_int...jhJ-Oqf8uG3f4i2h16aba88htjEyBEfKwge-WJ5KFO9MU
Sorry but this is general information support page.
I need direct links to August/2018 and later .zip updates in order to update from SD card
Android Pie V6.19B
This is OTA package downloaded after complete downgrading to Nougat 7.1.1
2019-10 Secutiry Patch
1649.5MB
OTA link:
https://android.googleapis.com/pack.../e2e47ae71b652cfd436b2050ccebdc628774b208.zip
6.19_SP1 2020-01 Patch (incremental from 6.19 2019-10)
393MB
https://android.googleapis.com/pack.../ed5bfd76a542cb818e745a86fecc2b9453681286.zip
---
6.19_SP2 2020-04 Patch (incremental from 6.19_SP1 2020-01)
110MB
https://android.googleapis.com/pack.../2560631fa2f4b717bb508e2f99f716aaea8fefc2.zip
---
6.19_SP3 2020-07 Patch (incremental from 6.19_SP2 2020-04)
118MB
https://android.googleapis.com/pack.../fc1171d9646e2929b11891afaaae00a9dca9ff44.zip
Android stock Nougat to Pie V6.19F
This is OTA package downloaded after complete downgrading to Nougat 7.1.1 after end of support
2020-10 Security Patch
1650.9MB
OTA link:
https://android.googleapis.com/packages/ota-api/package/74cd564e1ea847028d441635c1dc89fe1785074d.zip
Note 1: URL doesn't contain "nokia_nd1_ta104400ww" in its path but when looking at "META-INF\com\android\metadata" inside zip, it contais TA-1044 reference
Note 2: phone was forced to restore factory settings after update (failed to decrypt, even with no PIN or password set up)
Hi everyone,
My Razer Phone 2 has just gotten an update for November 2020 Security Patch. The build number is P-SMR6-SGT-RC001-RZR-201030.3682.
I am planning to root my device using the latest boot.img file on Razer Developer website, but I realized that the build number is slightly different, it being P-SMR6-RC001-RZR-201022.
I was wondering if flashing the boot.img file on the Razer website (with magisk) works for my particular build number - they're both MR6, but mine seems to be slightly different. I have never rooted/ flashed anything nor unlocked the bootloader before.
Cheers!
Well if the bootloader isn't unlocked then your phone will force a wipe before it can unlock. At that point you can just run the flash-all from the mr6 factory image and the build number will then match.